QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 461.0 976 32 10 Compatible rtc 0.0 rtc 1.0 rtc 3.0 rtc 450.0 rtc 451.0 Temperature Range Nitrile (N) FPM (V) EPDM

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 464.0 976 32 10 Compatible rtc 013 Nitto Kohki & & 40 Cejn 315 Rectus 13 Temperature Range Nitrile (N) FPM (V) EPDM

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 460.0 976 32 10 Compatible Ind. Interchange 3/ rtc 0 Cejn 4 Parker 25F Rectus Foster 4404 AMFO C26 Hansen 440 Temperature

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 40.0 97 24 32 10 Compatible Ind. Interchange 1/4 rtc 023 Cejn 310 Parker B23 Rectus 23 Foster 3003 AMFO C8 Hansen

COUPLING TECHNOLOGY. Water Pneumatic Hydraulic Electrical TYPE

COUPING TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories 0 0 COUPING TECHNOOGY 0 QUICK COUPINGS / SCHNEKUPPUNGEN COUPING TECHNOOGY General information - Allgemeine Informationen 0 Temperature

QUICK CONNECT TECHNOLOGY

Water Pneumatic Hydraulic Electrical Accesories M101 rtc Multicoupling systems rtc Multikupplungssysteme type M101 152 Flow diameter 9 mm / Nennweite 9 mm 3 3 Mobile side / Versorgerseite -06 SHB 10-06

I Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:43 PM Full compatibility with most popular plug systems Plug form 1:1 Nominal Bore SC Series Standards Compatible with* Information Page 6mm

Katalog SC OENA ESEN_OE Prospekt SC Layer USA /23/12 4:42 PM Page 1. Swing Couplings SC

Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:42 PM Page 1 s SC Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:42 PM Page 2 2-3 4-5 6 7 8-9 10 11 12 13 14 15 16 17 18 19 21 22 23

RMI multi-couplings. Temperature control

RMI multi-couplings Temperature control Centralised s... Registered Community Design... for greater implementation speed A full range The multi-coupling range is composed of four main families corresponding

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid

RMI multi-couplings Temperature control

RMI multi-couplings Temperature control Centralised s... New models Even more efficient. Applications ew features to discover on pages N 6 and 7. Even better performance ptimum mechanical strength and

Non-Drip Quick Connect Couplings

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications

RMI multi-couplings Control

RMI multi-couplings Control Centralised connections for greater implementation speed Centralised connection of control circuits Optimised time for changing moulds Streamlined connections. Efficient and

RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment

RMI-RMP L100.05 us B RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment STÄUBLI CORPORTION P.O. BOX 189 - DUNCN - S.C. 29334 PHONE 864/433-1980 TOLL-FREE NUMBER

pneumatic push-in fittings system LF 3000

pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329

FF Series (Steel) ISO Interchange

Eaton s FF Series flat face is specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability

SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet

SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm

BSP & HOSE Fittings M5, 1/8... 1

SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors

RMI Temperature control

RMI Temperature control 7 nominal diameters... hot and cold water, glycol water and heat transfer fluid circuits temperature control on injection presses Safe and quick locking A large number of locking

PNEUFIT 10 series Push-in fittings

PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for

Ring lock design prevents accidental disconnection To disconnect rotate sleeve 20 degrees. Standard body material: Zinc trivalent plated steel

2RL/3RL Series Eaton s 2RL/3RL ring lock series quick disconnect pneumatic couplings have a unique interchange which Eaton designed for use with compressed air. Product Features High Flow capacity Push

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)

411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption

RMI multi-couplings Control

RMI multi-couplings Control Centralised connections for greater implementation speed Centralised connection of control circuits optimised time for changing moulds streamlined connections. Efficient and

Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines.

HPX Hydraulics Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines. Non-spill, flush face design With non-spill flush faces, the HPX connector prevents

Electromechanical pressure switches

Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.

Hydraulic Quick Couplings General Purpose

Manual Sleeve, Unvalved Snap-tite H Series couplings have been proven by years of use on hydraulic applications. H Series is best suited for general purpose fluid applications where either single or double

SPH/BA Motorsports. Clean-break couplings for high pressure circuits

SPH/BA Motorsports Clean-break couplings for high pressure circuits Choose SPH/BA couplings... Applications - shock absorbers, brake and hydraulic lines - lubrication and coolants Combine lightweight and

UNITED STATES MEXICO CANADA

www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215

HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm

Compression fittings Metric and inch

Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.

brass compression fittings

compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube

LCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No

LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information

Inductive Cylinder Position Sensors

Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs

10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads

0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated

10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads

0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated

Series 95000, 2/2 Direct solenoid actuated poppet valve

> Port size: /4 (ISO G or NPT), G/ > Working from 0 bar up > Short switching times > Suited for fine vacuum down to,33 x 0 - mbar > For a.c. solenoid systems with integrated rectifier (40... 60 Hz) > Variable

DN40 (1 1/2") - DN200 (8") Hot Tappings

DN40 ( /2") - DN200 (8") Hot Tappings TONISCO B30 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN40 DN200 by completing it with proper adapters.

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

M12x1 Circular Connectors

M12x1 Circular Connectors Agenda 1. Introduction M12x1 Circular Connectors 2. M12x1 X-coded 3. M12x1 D-coded 4. Accessories and Nomenclature 3 / 2015 Product Presentation M12x1 Page 2 M12x1 Circular Connectors

15 and 16 Series BSP and hose fittings

SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical

95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves

9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to,33 0 - mbar > > For a.c. solenoid systems with

JOHN GUEST SPEEDFIT FITTINGS

G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE

PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages

PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages

Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.

Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page

Industrial Pressure Transmitter

NAT 8 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The industrial transmitter

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI

Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,

Radiator Lockshield Valves ADN.. AEN..

07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated

Temperature Switches

ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,

Spare parts list. Handheld pneumatic pick hammers CP 0222 CHIT, CP 0222 CHIT BS, CP 0222 CHOT BS.

Spare parts list Handheld pneumatic pick hammers CP 0 CHIT, CP 0 CHIT, CP 0 CHOT www.cp.com CP 0 CHIT, CP 0 CHIT, CP 0 CHOT 9800 00 0 CP 0 CHIT, CP 0 CHIT, CP 0 CHOT Contents Contents General information...............................................................

Operating pressure (bar) kv factor (m 3 /h) *3)

/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar

Quick Coupling Products

Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION

UPS-HSR. USB High Sample Rate. Pressure Sensor. Applications include, but not limited to: Product Highlights:

Product Highlights: Applications include, but not limited to: Pressure ranges from 2.5 up to 5,000 bar Accuracy

21023, 21025, 2/2 Direct solenoid actuated poppet valves

03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international

1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.

LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55

ACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT

Accessories ACCESSORIES Accessories to suit every sensor! Whether it's electrical connectors, mechanical adapters or the instrument mounting clamps, the wide range of products from HYDAC offers solutions

Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof

757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP

Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )

The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed

DMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial

DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure

QUICK RELEASE COUPLINGS

QUICK RELEASE COUPLINGS Cross Reference C.01 Catalogue C.3 ~ C13 Quick Release Couplings Interchange Chart PART NO Series Page Faster Parker Aeroquip Safeway DNP Ryco Stucci Hansen Tema QOV C.03 NV 4000

ICO3S - 2/2, 3/2 or 5/2 poppet valves Electromagnetically actuated, direct solenoid operated

ICOS - /, / or / poppet valves > > Port size: /... / (ISO G / NPT) Namur or manifold > > Control of pneumatic or hydraulic operated equipment > > Direct acting solenoid valve > > High flow > > bar inlet

ICO4S 2/2, 3/2 or 5/2 poppet valves electromagnetic actuated, directly controlled

ICO4S /, / or 5/ poppet valves > > Port size: /4... /4 (ISO G/NPT) or manifold version > > Reliable and long life, ideal for a one time installation > > Direct acting solenoid valve for the control of

RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No

RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description

M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems

MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE

V88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability

oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil

Data is only for informational purpose. All specifications are subject to change without notice.

MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV

FlexBar HRT Pressure Transmitter

FlexBar HRT Pressure Transmitter 4...0 ma, -wire transmitter, HART communication Some hygienic connections conform to -A standards, FDA demands and EHEDG guidelines Configurable span, unit and damping

1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA

DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01

V88 series Redundant valve manifold systems - Semi modular 2oo2 Availability

oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless

EPIC Circular Connectors CIRCON M23 Series

The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors

Electromechanical pressure switches

Presentation Presentation Pressure type XMX and XMA are for control circuits, with an adjustable differential. They are used to control the pressure of water and air, up to. Equipment fitted to the various

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology

FILTER NAME CONSTRUCTION FEATURES APPLICATIONS ORDER CODE MEMBRANE Body: polycarbonate Filter: PTFE membrane

Filter Caps for Humidity and Dewpoint Transmitters with probe 12 mm (0.47 ) The right choice of appropriate filter cap is essential for best long term performance in the application. For assistance please

PNEUMATIC TUBING FITTING

2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact

MDT 2000 Magnetostrictive linear position transducer

Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide,

AT-QC SF / 150 pcs AT-QC SF / 150 pcs AT-QC SF / 150 pcs

QUICK COUPLER ONE TOUCH SF Double knurling to avoid slip AT-QC07 0 SF 7 8 86 / 0 pcs AT-QC07 0 SF 7 0 89 / 0 pcs AT-QC076 0 SF 7 99 / 0 pcs QUICK COUPLER ONE TOUCH SH Double knurling to avoid slip AT-QC077

Technical data. General specifications. Functional safety related parameters B 10d Electrical specifications Operating voltage U B

Model Number Cable pull rotary encoder with PROFI- NET interface Features Robust aluminum drum housing Drum travel when cable retracted using threaded spindle Bellows with steel tip Comprehensive accessories

Pneumatic Control Unit for the integrated mounting on process valves

Pneumatic Control Unit for the integrated mounting on process valves Type 890 can be combined with Compact design Pilot valve with high air flow rate Internal control air channel Optical position indicator

LMP 308. Separable Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO / 0.

LMP 08 Separable Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.25 % FSO / 0. % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire:

ISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves

*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control

80265 series, 3/2 Indirect solenoid actuated poppet valve

> > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered,

Pneumatic Control/Feedback

897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type

SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)

COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl

Control Head for the integrated mounting on process valves

Control Head for the integrated mounting on process valves Type 8695 can be combined with Compact stainless steel design Integrated analog valve position registration (Teach function) Coloured illuminated

TH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information

Pneumatic vise grip Single pneumatic cylinder Sample size: 0 18 mm (depending on jaws) Weight: 1.55 kg each grip (without jaws) TH240g+2Ko Pneumatic vise grip Dual pneumatic cylinder Sample size: 0 18

DECONTACTOR METAL 20 A/30 A/50 A/90 A

DN DECONTACTOR METAL 20 A/30 A/50 A/90 A IP55 automatic (IP66/67 optional) AC-22 and AC-23 Integrated Breaking Capacity (IEC/ EN 60947-3) Impact resistant metal casing - IK09 Suitable for heavy industry

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up Comprehensive

Control Head for the integrated mounting on process valves

Control Head for the integrated mounting on process valves Type 8691 can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated

Interfaces Service and Field

Interfaces Service and Field Front Panel Interfaces Interfaces Service Receptacles Cable Entry Systems 02 TRANSFORMATOREN 03 MODLINK MSDD THE CONNECTION TO THE OUTSIDE WORLD A safe bet MARKET REQUIREMENTS

Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2.

e X L i n k exlink 7-pole / 6-pole + PE for Zone 1 and Zone 21 Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2. The exlink 7

DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c

DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................

MULTI ROTARY SWITCH MR50

MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design

CAMLOCK. Camlock MIL C CAMLOCK

Camlock MIL C-27487 Camlock MIL C-27487 MATERI MATIÈRE MATERI = Aluminium = Brass Laiton Latón SS = Stainless steel Inox PP = Polypropylene On request Sur demande Bajo pedido SIZE DIMENSIONS DIMENSIONES

Clamping Systems. PClamp. PClamp N. PClamp E. Gewährleistung. Inhalt. RotoClamp. DiskClamp. LinClamp. PClamp

Gewährleistung Inhalt N dvantages 1 Pneumatic clamping with high forces General information 2 Optimum safety clamping pneumatic failure locks the system The performance of hydraulic clamps will be achieved

Radiator Valves. Building Technologies HVAC Products. NF norm, for 2-pipe heating systems

6 EN - Straight valves VDN Angle valves VEN Reverse angle valves VUN Radiator Valves NF norm, for -pipe heating systems VDN VEN VUN Valve bodies made of brass, mat nickel-plated DN, DN and DN (VDN, VEN

Flow. Flow. N/en

/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated

Level sensor Stainless steel version Model RLT-1000, for industrial applications

Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring

60 series, 2/2 or 3/2 Ball valve

>> Port size: Rp/..., /... >> Ideally suited for most general purpose applications >> Easy installation, simple operation and maintenance free >> -way ball valves with actuator interface conforming to

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories