DEPARTMENT OF THE ARMY TECHNICAL MANUAL OPERATOR S, ORGANIZATIONAL, DS AND GS MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS

Transcription

1 DEPARTMENT OF THE ARMY TECHNICAL MANUAL OPERATOR S, ORGANIZATIONAL, DS AND GS MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS PISTOL, CALIBER.38, AUTOMATIC: COLT, GOLD CUP NATIONAL MATCH ( ) PISTOL, CALIBER.45, AUTOMATIC: COLT, GOLD CUP NATIONAL MATCH ( ) PISTOL, CALIBER.32, AUTOMATIC: COLT, MODEL M, W/E ( ) PISTOL, CALIBER.22, AUTOMATIC: HI-STANDARD, SUPERMATIC TOURNAMENT ( ) PISTOL, CALIBER.22, AUTOMATIC: SMITH AND WESSON, MODEL 41 ( ) PISTOL, CALIBER.22, AUTOMATIC: SMITH AND WESSON, MODEL 46 ( ) PISTOL, CALIBER.38, AUTOMATIC: SMITH AND WESSON, MODEL 52 ( ) HEADQUARTERS, DEPARTMENT OF THE ARMY October 1971

2 This manual contains copyright Material reproduced by permission of: *TM P/3 Colt s Patent Fire Arms and Manufacturing Co., Inc. (Figures 1, 2, 3, 8, 9, , 12, 13, 14, 15 and 16) The High Standard Manufacturing Corp. (Figures 4, 17, 18, 19 and 20) Smith and Wesson, Inc. (Figures 5, 6, 7, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, and 33) National Rifle Association of America and the American Rifleman (Figures 23 and 27) TECHNICAL MANUAL HEADQUARTERS DEPARTMENT OF THE ARMY No P/3 Washington, D.C., 6 October 1971 } OPERATOR S ORGANIZATIONAL, DS, AND GS, MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS PISTOL, CALIBER.38, AUTOMATIC: COLT, GOLD CUP NATIONAL MATCH PISTOL, CALIBER.45, AUTOMATIC: COLT, GOLD CUP NATIONAL MATCH PISTOL, CALIBER.32, AUTOMATIC: COLT, MODEL M, W/E PISTOL, CALIBER.22, AUTOMATIC: HI-STANDARD, SUPERMATIC TOURNAMENT PISTOL, CALIBER.22, AUTOMATIC: SMITH AND WESSON, MODEL 41 PISTOL, CALIBER.22, AUTOMATIC: SMITH AND WESSON, MODEL 46 PISTOL, CALIBER.38, AUTOMATIC: SMITH AND WESSON, MODEL 52 This manual is current as of 15 September 1971 *This manual supersede TM P/3, 20 March 1963, including changes. 1

3 Page Illus Figure Section I. Section II. Section III. Section IV. Section V. Section VI. Introduction...3 Repair parts list...13 Special tools list...15 Repair parts list...17 Pistol, Caliber.38, Automatic, Colt Gold Cup National Match Major groups and assemblies...9 Magazine assembly...10 Slide group...11 Receiver group...12 Pistol, Caliber.45 Automatic, Colt Gold Cup National Match Major groups and assemblies...13 Magazine assembly...14 Slide group...15 Receiver group...12 Pistol, Caliber.32 Automatic, Colt Model M Magazine assembly...16 Pistol, Caliber.22 Automatic, Hi-Standard Supermatic Tournament Major groups and assemblies...17 Magazine assembly...18 Slide group...19 Barrel and receiver group...20 Pistol, Caliber.22, Automatic, Smith and Wesson, Model 41 Major groups and assemblies...21 Magazine assembly...22 Barrel group...23 Slide assembly...24 Receiver group...25 Pistol, Caliber.22, Automatic. Smith and Wesson, Model 46 Major groups and assemblies...26 Magazine assembly...22 Barrel group...27 Slide assembly...28 Receiver group...29 Pistol, Caliber.38, Automatic Smith and Wesson, Model 52 Major groups and assemblies...30 Magazine assembly...31 Slide and barrel group...32 Receiver assembly...33 Special tools list...39 Federal stock number and reference number index

4 Section I. INTRODUCTION 1. Scope This manual lists repair parts, special tools, and support equipment required for the performance of organizational, direct support and general support maintenance of commercial pistols. See figures 1 through 7. Figure 1. Gold Cup National Match Colt caliber.38 automatic pistol, 5-inch barrel left side view 3

5 Figure 2. Gold Cup National Match Colt caliber.45 automatic pistol, 5-inch barrel left side view. 4

6 Figure 3. Colt Caliber.32 Automatic Pistol, 3 3/4-inch barrel right side view. 5

7 Figure 4. Supermatic Tournament Hi-Standard, caliber.22 automatic pistol- 6 3/4-inch barrel left side view. Figure 5. Model 41, Smith and Wesson caliber.22 automatic pistol, 7-3/8-inch barrel right side view. 6

8 Figure 6. Model 46, Smith and Wesson, caliber.22 automatic pistol, 7-inch barrel right side view. 7

9 Figure 7. Model 52, Smith and Wesson, caliber.38 automatic pistol, 5-inch barrel left side view. 8

10 2. General This Repair Parts, and Special Tools List is divided into the following sections: a. Basic Issue Items List. Not applicable. b. Items Troop Installed or Authorized List. Not applicable. c. Repair Parts Section II. A list of Repair Parts authorized at the organizational level for the performance of maintenance. It also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending numerical sequence, with the parts in each group listed in figure and item number sequence. d. Special Tools List Section III. A list of special tools, test and support equipment authorized for the performance of maintenance at the organizational level. e. Repair Parts List Section IV. A list of repair parts authorized at the direct support and general support levels for the performance of maintenance. The list also includes parts which must be removed for the replacement of the authorized parts. Parts lists are composed of functional groups in ascending numerical sequence, with parts in each group listed in figure and item number sequence. f. Special Tools List Section V. A list of special tools, test and support equipment authorized for the performance of maintenance at the direct support and general support levels. g. Federal Stock Number and Reference Number Index Section VI. A list, in ascending numerical sequence, of all Federal stock numbers appearing in the listings, followed by a list, in alphameric sequence, of all reference numbers appearing in the listings. Federal stock number and reference numbers are crossreferenced to each illustration figure and item number appearance. 3. Explanation of Columns The following provides an explanation of columns found in the tabular listings. a. Source, Maintenance and Recoverability Codes (SMR). (1) Source Code. Indicates the source for the listed item. Source codes are: Code P P2 Explanation Repair parts, special tools and test equipment supplied from the GSA/DSA, or Army supply system, and authorized for use at indicated maintenance categories. Repair parts, special tools and test equipment which are procured and stocked for insurance purposes because the combat or military essentially of the end item dictates that a minimum quantity be available in the supply system. Code P9 P10 M A X X1 X2 G Explanation Assigned to items which are NSA design controlled: unique repair parts. special tools. test. measuring, and diagnostic equipment which are stocked and supplied by the Army COMSEC Logistic System and which are not subject to the provisions of AR Assigned to items which are NSA design controlled: special tools, test, measuring and diagnostic equipment for COMSEC support. which are accountable under the provisions of AR , and which are stocked and supplied by the Army COMSEC Logistic System. Repair parts, special tools and test equipment which are not procured or stocked as such in the supply system but are to be manufactured at indicated maintenance levels. Assemblies which are not procured or stocked as such but are made up of two or more units Such component units carry individual stock numbers and descriptions, are procured and stocked separately, and can be assembled to form the required assembly at indicated maintenance categories Parts and assemblies that are not procured or stocked because the failure rate is normally below that of the applicable end item or component The failure of such part or assembly should result in retirement of the end item from the supply system Repair Parts which are not procured or stocked. The requirement for such items will be filled by the next higher assembly or component. Repair parts, special tools, and test equipment which are not stocked and have no foreseen mortality. The indicated maintenance category requiring such repair parts will attempt to obtain the parts through cannibalization or salvage The item may be requisitioned, with exception data, from the end item manager for immediate use. Major assemblies that are procured with PEMA funds for initial issue only as exchange assemblies at DS and GS level These assemblies will not be stocked above the DS and GS level or returned to depot supply level. NOTE Cannibalization or salvage may be used as a source of supply for any items source coded above except those coded X1 and aircraft support items as restricted by AR (2) Maintenance Code. Indicates the lowest category of maintenance authorized to install the repair part and/or use the special tool or test equipment for each application. Capabilities of higher maintenance categories are considered equal or better. Maintenance codes are: Code Explanation C Crew/operator O Organizational maintenance F Direct support maintenance H General support maintenance D Depot maintenance. 9

11 (3) Recoverability Code. Indicates whether unserviceable items should be returned for recovery or salvage. Items not coded are nonrecoverable. Recoverability codes are: Code R S T Explanation Applied to repair parts. (assemblies and components special tools and test equipment which are considered economically reparable at direct and general support maintenance levels. When the item is no longer economically reparable. it is normally disposed of at the GS level. When supply considerations dictate, some of these repair parts may be listed for automatic return to supply for depot level repair as set forth in AR When so listed. they will be replaced by supply on an exchange basis. Repair Parts, Special Tools Test Equipment and assemblies which are economically reparable at DS and GS activities and which normally are furnished by supply on an exchange basis. When items are determined by a GSU to be uneconomically reparable, they will be evacuated to a depot for evaluation and analysis before final disposition. Higher dollar value recoverable repair parts, special tools and test equipment which are subject to special handling and are issued on an exchange basis. Such items will be repaired or overhauled at depot maintenance activities only. No repair may be accomplished at a lower levels. U Repair Parts, Special Tools and Test Equipment specifically selected for salvage by reclamation units because of precious metal content, critical materials, high dollar value or reusable casings or castings. b. Federal Stock Number. Indicates the Federal stock number assigned to the item and will be used for requisitioning purposes. c. Description. Indicates the Federal item name and a minimum description required to identify the item. The last line indicates the reference number followed by the applicable Federal Supply Code for Manufacturer (FSCM) in parentheses. The FSCM is used as an element in item identification to designate manufacturer or distributor or Government agency, etc., and is identified in SB Items that are included in kits and sets are listed below the name of the kit or set with quantity of each item in the kit or set indicated in front of the item name. d. Unit of Measure (U/M). Indicates the standard or basic quantity by which the listed item is used in performing the actual maintenance function. This measure is expressed by a two-character alphabetical abbreviation, e.g., ea, in, pr, etc., and is the basis used to indicate quantities and allowances, in subsequent columns. When the unit of measure differs from the unit of issue, the lowest unit of issue that will satisfy the required units of measure will be requisitioned. e. Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional groups, or an assembly. A "V" appearing in this column in lieu of a quantity indicates that no specific quantity is applicable, e.g., shims, spacers, etc. f. 15-Day Organizational Maintenance Allowances. (1) The allowance columns are divided into four sub-columns. Items authorized for use are identified with an asterisk in the allowance column opposite the first appearance of each item. Subsequent appearances have the letters "REF" in the allowance columns. (2) Subsequent changes to allowance lists will be accomplished in accordance with AR In addition the major commands will be authorized to approve reductions in stockage allowances (range and quantity). If additional items are considered necessary, recommendations should be forwarded to Commanding General, U.S. Army Weapons Command, ATTN: AMSWE-MAP, Rock Island, Illinois 61201, for exception or revision to the allowance list. g. 30-Day DS/GS Maintenance Allowances. NOTE Allowances in GS Column are for GS Maintenance only. The allowance columns are divided into three subcolumns. Items authorized for use are identified with an asterisk in the allowance column opposite the first appearance of each item. Subsequent appearances of the same item will have the letters "REF" in the applicable allowance columns. h. 1-Year Allowances per 100 Equipments/ Contingency Planning Purposes. This column indicates opposite the first appearance of each item the authorization for distribution and contingency planning purposes. The range of items indicates the authorization of all items required to provide for adequate support of 100 equipments for one year. Subsequent appearances of the same item will have the letters "REF" in this column. i. Depot Maintenance Allowance per 100 Equipments. Not applicable. j. Illustration. This column is divided as follows. (1) Figure Number. Indicates the figure number of the illustration in which the item is shown. (2) Item Number. Indicates the callout number used to reference the item on the illustration. 10

12 4. Special Information a. Usable on codes are included in Column 3. Identifications of the usable on codes in this publication are: Code A B C D E F G H I J Used on Pistol, Caliber.38, Automatic: Colt, Gold Cup National Match ( ) Pistol, Caliber.45, Automatic: Colt, Gold Cup National Match ( Pistol, Caliber.38, Automatic: Colt, Gold Cup National Match ( Pistol, Caliber.45, Automatic: Colt, Gold Cup National Match ( ) Pistol, Caliber.32, Automatic: Colt, Model M W/E ) Pistol, Caliber.22, Automatic: Hi- Standard, Supermatic Tournament ) Pistol, Caliber.22, Automatic: Smith and Wesson, Model 41 ( ) Pistol, Caliber.22, Automatic: Smith and Wesson, Model 46 ( ) Pistol, Caliber.22, Automatic: Smith and Wesson, Model 41 ( ) Pistol, Caliber.22, Automatic: Smith and Wesson, Model 46 ( ) Pistol, Caliber.38, Automatic: Smith and Wesson, Model 52 ( ) Pistol, Caliber.22, Automatic: Smith and Wesson, Model 41 ( ) Pistol, Caliber.22, Automatic: Smith and Wesson, Model 46 ( Pistol, Caliber.38, Automatic: Smith and Wesson, Model 52 ( ) b. Action change codes indicated in the left-hand margin of the listing page denote the following: N Indicates an added item. C Indicates a change in data. R Indicates a change in FSN only. c. The following maintenance supplies and materials are recommended for these pistols. Pertinent authorized documents are the proper requisitioning authority for these maintenance expendable supplies and materials. FSN Nomenclature SWAB, SMALL ARMS CLEANING: 2 1/2 SQ (1000 PER PG) SWAB, SMALL ARMS CLEANING: 1 1/4 SQ (1000 PER PG)) FSN Nomenclature CLEANING COMPOUND, RIFLE BORE: (RBC) (8 OZ CAN) DRY CLEANING, SOLVENT: (SD) (1 GAL CAN) LUBRICATING OIL, GENERAL PURPOSE: (PL SPECIAL) (4 OZ CAN) 5. How to Locate Repair Parts a. When Federal stock number or reference number is unknown: (1) First. Using the table of contents determine the functional group within which the repair part belongs. This is necessary since illustrations ace prepared for functional groups and listings are divided into the same groups. (2) Second. Find the illustration covering the functional group to which the repair part belongs. (3) Third. Identify the repair part on the illustration and note the illustration figure and item number of the repair part. (4) Fourth. Using the Repair Parts Listings. Find the functional group to which the repair part belongs and locate the illustration figure and item number noted on the illustration. b. When Federal stock number or reference number is known: (1) First. Using the Index of Federal Stock Numbers and Reference Numbers find the pertinent Federal stock number or reference number. This index is in ascending FSN sequence followed by a list of reference numbers in ascending alphameric sequence, cross-referenced to the illustration figure number and item number. (2) Second. Using the Repair Part Listing, find the functional group of the repair part and the illustration figure number and item number referenced in the Index of Federal Stock Numbers and Reference Numbers. 6. Abbreviations Not applicable. 7. Recommendations for Maintenance Publications Improvements You can improve this manual by calling attention to errors and by recommending improvements, using DA Form 2028 (Recommended Changes to Publications) or by a letter, and mailing directly to Commanding General, U.S. Army Weapons Command, ATTN: AMSWE-MAP, Rock Island, Illinois

13 Section II. REPAIR PARTS LIST (1) (2) (3) (4) (5) (6) (7) QTY 15 DAY ORGANIZATIONAL DESCRIPTION UNIT INC MAINTENANCE ILLUSTRATION FEDERAL OF IN (a) (b) (c) (d) SMR STOCK MEAS UNIT FIGURE ITEM CODE NUMBER NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE PISTOL, CALIBER.38, AUTOMATIC: COLT, GOLD CUP NATIONAL... MATCH P O MAGAZINE ASSEMBLY: EA 1 * * * * (13629) A P O STOP, SLIDE: EA 1 * * * * (13629) A PISTOL, CALIBER.45, AUTOMATIC: COLT GOLD CUP NATIONAL MATCH P O MAGAZINE ASSEMBLY: EA 1 * * * * (13629) B P O STOP, SLIDE: EA 1 * * * * (13629) B PISTOL, CALIBER.32 AUTOMATIC: COLT, MODEL M N P O MAGAZINE ASSEMBLY: EA 1 * * * * (13629) PISTOL, CALIBER.22, AUTOMATIC: HI-STANDARD SUPERMATIC TOURNAMENT P O MAGAZINE ASSEMBLY: EA 1 * * * * M (28627) E PISTOL, CALIBER.22, AUTOMATIC: SMITH AND WESSON, MODEL 41 P O MAGAZINE ASSEMBLY: EA 1 * * * * (55358) H PISTOL, CALIBER.22, AUTOMATIC: SMITH AND WESSON, MODEL 46 P O MAGAZINE ASSEMBLY: EA 1 * * * * (55358) H PISTOL CALIBER.38, AUTOMATIC: SMITH AND WESSON, MODEL 52 P O MAGAZINE ASSEMBLY: EA 1 * * * * (55358) 13

14 Section III. SPECIAL TOOLS LIST (1) (2) (3) (4) (5) (6) (7) QTY 15 DAY ORGANIZATIONAL DESCRIPTION UNIT INC MAINTENANCE ILLUSTRATION FEDERAL OF IN (a) (b) (c) (d) SMR STOCK MEAS UNIT FIGURE ITEM CODE NUMBER NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE TOOLS AND EQUIPMENT TOOLS AND EQUIPMENT ARE AUTHORIZED FOR CALIBER.32 PISTOL ONLY P O BRUSH, CLEANING, SMALL ARMS BORE: EA ** * * * * (19205) P O ROD, CLEANING, SMALL ARMS: M4 EA ** * * * (19204) 15

15 Section IV. REPAIR PARTS LIST (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP PISTOL, CALIBER.38, AUTOMATIC: COLT GOLD CUP NATIONAL MATCH MAJOR GROUPS AND ASSEMBLIES P O MAGAZINE ASSEMBLY: EA 1 * * * * * * * * (13629) A P O STOP, SLIDE: EA 1 * * * * * * * * (13629) A A F... SLIDE GROUP A EA A F... RECEIVER GROUP A EA MAGAZINE ASSEMBLY X1 F... BASE: A EA X1 F... RETAINER: A EA P F SPRING ASSEMBLY, MAGAZINE EA 1 * * * * * * * * (13629) A X1 F... STUD: A EA P F FOLLOWER. MAGAZINE (13629) A EA 1 * * * * * * * * 10 5 X1 F... TUBE: A EA SLIDE GROUP P F PLUG, RECOIL SPRING: EA 1 * * * * * * * * (13629) C P F BUSHING, BARREL: EA 1 * * * * * * * * (13629) A P F SPRING, RECOIL: EA 1 * * * * * * * * (13629) P F GUIDE, RECOIL SPRING EA 1 * * * * * * * * (13629) P F BARREL, 5-INCH: EA 1 * * * * * * * * (13629) A P F SPRING, BARREL RETURN- EA 1 * * * * * * * * (13629) A P F STOP, FIRING PIN: EA 1 * * * * * * * * (13629) A P F PIN, FIRING: EA 1 * * * * * * * * (13629) C P F SPRING, FIRING PIN:. EA 1 * * * * * * * * (13629) C P F EXTRACTOR: EA 1 * * * * * * * * (13629) A P F PIN, BASE, REAR SIGHT- EA 1 * * * * * * * * (13629) C 17

16 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F SIGHT, ASSEMBLY, REAR: EA 1 * * * * * * * * (13629) A P F SPRING, ELEVATING, REAR SIGHT: EA 1 * * * * * * * * (13629) C P F SCREW, ELEVATING, REAR SIGHT LONG: EA 1 * * * * * * * * (13629) C P F SPRING. ELEVATING SCREW DETENT. REAR SIGHT: EA 1 * * * * * * * * (13629) C P F BALL, DETENT, REAR SIGHT: EA 2 * * * * * * * * (13629) C P F SCREW, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (13629) C P F BLADE, REAR SIGHT: EA 1 * * * * * * * * (13629) C P F SPRING, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (13629) X1 F... BASE, REAR SIGHT A EA P F SLIDE ASSEMBLY: EA 1 * * * * * * * * (13629) A P F SIGHT, FRONT: EA 1 * * * * * * * * * (13629) C X1 F... SLIDE: A EA RECEIVER GROUP R P F SCREW, STOCK: EA 4 * * * * * * * * (13629) A C P F GRIP, PISTOL. LEFT HAND AND RIGHT HAND: EA 2 * * * * * * * * (13629) P F PIN, MAINSPRING HOUSING: EA 1 * * * * * * * * (13629) A P F HOUSING, MAINSPRING, FLAT EA 1 * * * * * * * * (13629) C P F PIN, MAINSPRING CAP: EA 1 * * * * * * * * (13629) C P F CAP, MAINSPRING: EA 1 * * * * * * * * (13629) C P F MAINSPRING: EA 1 * * * * * * * * (13629) C P F RETAINER, PIN, MAINSPRING HOUSING: EA 1 * * * * * * * * (13629) C P F LOCK, SAFETY: EA 1 * * * * * * * * (13629) C 18

17 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F SAFETY, GRIP: EA 1 * * * * * * * * (13629) C P F SPRING, SEAR: EA 1 * * * * * * * * (13629) C P F PIN, HAMMER: EA 1 * * * * * * * * (13629) C P F PIN, HAMMER STRUT: EA 1 * * * * * * * * (13629) C P F STRUT, HAMMER: EA 1 * * * * * * * * (13629) C P F HAMMER: EA 1 * * * * * * * * (13629) C P F PIN, SEAR: EA 1 * * * * * * * * (13629) C P F SEAR: EA 1 * * * * * * * * (13629) A P F DISCONNECTOR: EA 1 * * * * * * * * (13629) C P F TRIGGER ASSEMBLY: EA 1 * * * * * * * * (13629) C P F STOP, TRIGGER: EA 1 * * * * * * * * (13629) C X1 F... TRIGGER: C EA P F PLUNGER, SAFETY LOCK: EA 1 * * * * * * * * (13629) C P F SPRING, PLUNGER: EA 1 * * * * * * * * (13629) C P F PLUNGER, SLIDE STOP: EA 1 * * * * * * * * (13629) C P F TUBE, PLUNGER: EA 1 * * * * * * * * (13629) P F PIN, EJECTOR: EA 1 * * * * * * * * (13629) C P F INJECTOR: EA 1 * * * * * * * * (13629) A P F CATCH., MAGAZINE: EA 1 * * * * * * * * (13629) C P F SPRING, MAGAZINE CATCH: EA 1 * * * * * * * * (13629) C P F LOCK, MAGAZINE CATCH: EA 1 * * * * * * * * (13629) C P F BUSHING, STOCK SCREW: EA 4 * * * * * * * * (13629) C X... RECEIVER: C EA 1 *

18 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP PISTOL, CALIBER.45 AUTOMATIC: COLT GOLD CUP NATIONAL MATCH MAJOR GROUPS AND ASSEMBLIES P O MAGAZINE ASSEMBLY: EA 1 * * * * * * * (13629) B P O STOP, SLIDE: EA 1 * * * * * * * (13629) B A F... SLIDE GROUP: B EA 1 * * * * * * * 13 3 A F... RECEIVER GROUP MAGAZINE ASSEMBLY B EA P F FOLLOWER, MAGAZINE: EA 1 * * * * * * * (13629) B P F SPRING, MAGAZINE: EA 1 * * * * * * * (13629) B P F... TUBE WITH BASE: B EA SLIDE GROUP P F BUSHING, BARREL EA 1 * * * * * * * (13629) B P F PLUG, RECOIL SPRING: EA 1 REF REF REF REF REF REF REF ( (13629) C P F SPRING, RECOIL EA 1 * * * * * * * (13629) B P F GUIDE, RECOIL SPRING EA 1 REF REF REF REF REF REF REF (13629) C P F BARREL, 5-INCH EA 1 * * * * * * * (13629) B P F PIN, BARREL LINK EA 1 * * * * * * * (13629) B P F LINK, BARREL EA 1 * * * * * * * (13629) B P F STOP, FIRING PIN EA 1 REF REF REF REF REF REF REF (13629) C P F PIN, FIRING: EA 1 REF REF REF REF REF REF REF (13629) C P F SPRING, FIRING PIN: EA 1 REF REF REF REF REF REF REF (13629) C P F EXTRACTOR: EA 1 * * * * * * * (13629) B P F PIN, BASE, REARSIGHT: EA 2 REF REF REF REF REF REF REF (13629) C P F SIGHT ASSEMBLY, REAR: EA 1 REF REF REF REF REF REF REF (13629) C 20

19 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F SPRING, ELEVATING, REAR SIGHT: EA 2 REF REF REF REF REF REF REF (13629) C P F SCREW, ELEVATING, REAR SIGHT: EA 1 REF REF REF REF REF REF REF (13629) C P F BALL, DETENT, REAR SIGHT: EA 2 REF REF REF REF REF REF REF (13629) C P F SPRING, ELEVATING SCREW DETENT, REAR SIGHT: EA 1 REF REF REF REF REF REF REF , (13629) C P F SCREW, WINDAGE, REAR SIGHT: EA 1 REF REF REF REF REF REF REF (13629) C P F BLADE, REAR SIGHT: EA 1 REF REF REF REF REF REF REF (13629) C P F SPRING, WINDAGE, REAR SIGHT: EA 1 REF REF REF REF REF REF REF (13629) C X1 F... BASE: B EA P F SLIDE ASSEMBLY: EA 1 * * * * * * * (13629) B P F SIGHT, FRONT: EA 1 REF REF REF REF REF REF REF (13629) C X1 F... SLIDE: B EA RECEIVER GROUP R P F SCREW, STOCK: EA 4 REF REF REF REF REF REF REF (13629) B C P F GRIP, PISTOL: LEFT HAND AND RIGHT HAND EA 2 REF REF REF REF REF REF REF (13629) C A F PIN, MAINSPRING HOUSING EA 1 REF REF REF REF REF REF REF (13629) C P F HOUSING, MAINSPRING, ROUND: EA 1 * * * * * * * (13629) B OR P F HOUSING, MAINSPRING, FLAT: EA 1 REF REF REF REF REF REF REF (13629) C P F PIN, MAINSPRING CAP: EA 1 REF REF REF REF REF REF REF (13629) C P F CAP, MAINSPRING: EA 1 REF REF REF REF REF REF REF (13629) C P F MAINSPRING: EA 1 REF REF REF REF REF REF REF (12629) C P F RETAINER, PIN, MAINSPRING HOUSING: EA 1 REF REF REF REF REF REF REF (13629) C 21

20 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F LOCK, SAFETY: EA 1 REF REF REF REF REF REF REF REF (13629) C P F SAFETY, GRIP: EA 1 REF REF REF REF REF REF REF REF (13629) C P F SPRING, SEAR: EA 1 REF REF REF REF REF REF REF REF (13629) C P F PIN, HAMMER: EA 1 REF REF REF REF REF REF REF REF (13629) C P F PIN, HAMMER STRUT: EA 1 REF REF REF REF REF REF REF REF (13629) C P F STRUT, HAMMER: EA 1 REF REF REF REF REF REF REF REF (13629) C P F HAMMER: EA 1 REF REF REF REF REF REF REF REF (13629) C P F PIN, SEAR: EA 1 REF REF REF REF REF REF REF REF (13629) C P F SEAR: EA 1 * * * * * * * * (13629) B P F DISCONNECTOR: EA 1 REF REF REF REF REF REF REF REF (13629) C P F TRIGGER ASSEMBLY: EA 1 REF REF REF REF REF REF REF REF (13629) C P F STOP, TRIGGER: EA 1 REF REF REF REF REF REF REF REF ( C X1 F... TRIGGER: C EA P F PLUNGER, SAFETY LOCK: EA 1 REF REF REF REF REF REF REF REF (13629) C O F SPRING, PLUNGER: EA 1 REF REF REF REF REF REF REF REF (13629) C P F PLUNGER, SLIDE STOP: EA 1 REF REF REF REF REF REF REF REF (13629) C P F TUBE, PLUNGER: EA 1 REF REF REF REF REF REF REF REF (12629) C P F PIN EJECTOR. EA 1 REF REF REF REF REF REF REF REF (13629) C P F EJECTOR: EA 1 * * * * * * * * (13629) B P F CATCH, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (13629) C P F SPRING, MAGAZINE CATCH: EA 1 REF REF REF REF REF REF REF REF (13629) C 22

21 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F LOCK, MAGAZINE CATCH: EA 1 REF REF REF REF REF REF REF (13629) C P F BUSHING, STOCK SCREW: EA 4 REF REF REF REF REF REF REF (13629) C X... RECEIVER: C EA PISTOL, CALIBER.32 AUTOMATIC: COLT MODEL M MAJOR GROUPS AND ASSEMBLIES N P O MAGAZINE ASSEMBLY: EA 1 * * * * * * * (13629) D PISTOL, CALIBER.22 AUTOMATIC: HI-STANDARD, SUPERMATIC TOURNAMENT MAJOR GROUPS AND ASSEMBLIES P O MAGAZINE ASSEMBLY: EA 1 * * * * * * * M (28627) E X P F BARREL ASSEMBLY: EA 1 * * * * * * * (28627) E A F... SLIDE GROUP E EA A F... BARREL AND RECEIVER GROUP: E EA MAGAZINE ASSEMBLY P F BUTTON, MAGAZINE EA 1 * * * * * * * (28627) E P F FOLLOWER, MAGAZINE- EA 1 * * * * * * * (28627) E P F SPRING, MAGAZINE EA 1 * * * * * * * (28627) X1 F... TUBE EA 1 * * * * * * * 18 4 SLIDE GROUP A F.... SLIDE ASSEMBLY: EA P F PIN DRIVING SPRING PLUG AND FIRING PIN RETAINING EA * * * (28627) E P F PLUG, DRIVING SPRING: EA 1 * * * * * * * (28627) E P F SPRING, DRIVING: EA 1 * * * * * * * (28627) E P F PLUNGER, DRIVING SPRING: EA 1 * * * * * * * (28627) E P F PIN, FIRING: EA 1 * * * * * * * (28627) E P F SPRING, FIRING PIN: EA 1 * * * * * * * (28627) E 23

22 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F EXTRACTOR: EA 1 * * * * * * * * (28627) E P F PLUNGER, EXTRACTOR: EA 1 * * * * * * * * (28627) E P F SLIDE: EA 1 * * * * * * * * (28627) E P F SPRING, EXTRACTOR: EA 1 * * * * * * * * (28627) E P F SIGHT ASSEMBLY, REAR: EA 1 * * * * * * * * (28627) E P F PIN, RETAINING, REAR SIGHT: EA 1 * * * * * * * * (28627) E P F SCREW, ELEVATION. REAR SIGHT: EA 1 * * * * * * * * (28627) E P F PLUNGER, ELEVATING, REAR SIGHT: EA 1 * * * * * * * * (28627) E P F SPRING, ELEVATING, RI AR SIGHT: EA 2 * * * * * * * * (28627) E P F PLUNGER, ELEVATING, DETENT, REAR SIGHT: EA 1 * * * * * * * * (29827) E P F BALL, ELEVATING, REAR SIGHT: EA 2 * * * * * * * * (28627) P F MEMBER, CROSS, REAR SIGHT: EA 1 * * * * * * * * (28627) E P F SCREW, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (28627) E P F SPRING, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (29627) E P F PLUNGER, WINDAGE DETENT, REAR SIGHT: EA 1 * * * * * * * * (28627) E P F SPRING, SLIDE LOCK: EA 1 * * * * * * * * (28627) E P F PIN, LEAF PIVOT, REAR SIGHT: EA 1 * * * * * * * * (28627) E P F LEAF, REAR SIGHT: EA 1 * * * * * * * * (28627) E P F BASE, REAR SIGHT: EA 1 * * * * * * * * (29827) E BARREL AND RECEIVER GROUP P F BARREL ASSEMBLY: EA 1 REF REF REF REF REF REF REF REF (28627) E 24

23 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F SCREW, FRONT SIGHT: EA 1 * * * * * * * * (28627) E P F SIGHT, FRONT: EA 1 * * * * * * * * (28627) E P F PIN, BARREL STUD: EA 1 * * * * * * * * (28627) E P F STUD, BARREL: EA 1 * * * * * * * * (28627) E X1 F... BARREL: 6-3/4-INCH: EA 1 * 20 6 E P F SCREW, GRIP: EA 2 * * * * * * * * (28627) E P F WASHER, GRIP SCREW: EA 2 * * * * * * * * (28627) E C P F STOCK, LEFT HAND AND RIGHT HAND: EA 2 * * * * * * * * (28627) E OR C P F STOCK, LEFT HAND AND RIGHT HAND: EA 2 * * * * * * * * (28627) E P F PIN, MAGAZINE CATCH: EA 1 * * * * * * * * (28627) E P F CATCH, MAGAZINE: EA 1 * * * * * * * * (28627) E P F SPRING, MAGAZINE CATCH: EA 1 * * * * * * * * (28627) E P F LEVER, SLIDE LOCK: EA 1 * * * * * * * * (28627) E P F SPRING, SLIDE LOCK: EA 2 REF REF REF REF REF REF REF REF (28627) E P F SCREW, SIDE PLATE: EA 1 * * * * * * * * (28627) E P F PLATE, SIDE: EA 1 * * * * * * * * (28627) E P F SAFETY: EA 1 * * * * * * * * (28627) E P F SPRING, SEAR BAR: EA 1 * * * * * * * * (28627) E P F BAR, SEAR AND TRIGGER PULL PIN: EA 1 * * * * * * * * (28627) E P F WASHER, SAFETY SPACER: EA 1 * * * * * * * * (29627) E P F SCREW, ANTI-BACKLASH: EA 1 * * * * * * * * (28627) E 25

24 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F PIN, TRIGGER: EA 1 * * * * * * * * (28627) E P F TRIGGER: EA 1 * * * * * * * * (28627) E P F PIN, HAMMER: EA 1 * * * * * * * * (28627) E P F PIN, HAMMER STRUT: EA 1 * * * * * * * * (28627) E P F HAMMER: EA 1 * * * * * * * * (28627) E P F STRUT, HAMMER: EA 1 * * * * * * * * (28627) E P F RING, HAMMER STRUT: EA 1 * * * * * * * * (28627) E P F PIN, ANCHOR, HAMMER STRUT: EA 1 * * * * * * * * (28627) E P F SPRING, HAMMER: EA 1 * * * * * * * * (28627) E P F PIN, SEAR: EA 1 * * * * * * * * (28627) E P F SEAR: EA 1 * * * * * * * * (28627) E P F PIN, SEAR SPRING AND BARREL TAKEDOWN PLUNGER: EA 2 * * * * * * * * (28627) E P F SPRING, SEAR: EA 1 * * * * * * * * (28627) E P F PLUNGER, BARREL TAKEDOWN: EA 1 * * * * * * * * (28727) E P F SPRING, BARREL TAKEDOWN PLUNGER: EA 1 * * * * * * * * (28627) E P F WASHER, ANTI-BACKLASH DETENT: EA 1 * * * * * * * * (28627) E P F PIN, RETAINING EJECTOR: EA 1 * * * * * * * * (28627) E P F EJECTOR, BLADE TYPE: EA 1 * * * * * * * * (28627) E P F EJECTOR, HOLLOW PIN: EA 1 * * * * * * * * 10250(28627) E P F EJECTOR, STUD TYPE: EA 1 * * * * * * * * (28627) E X... RECEIVER: E EA

25 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP PISTOL, CALIBER.22, AUTOMATIC: SMITH AND WESSON, MODEL 41 MAJOR GROUPS AND ASSEMBLIES P O MAGAZINE ASSEMBLY. EA 1 * * * * * * * * (55358) H A F... BARREL GROUP: F EA A F... SLID: ASSEMBLY: F EA A F... RECEIVER GROUP F EA MAGAZINE ASSEMBLY P F PLATE, BUTT, MAGAZINE: EA 1 * * * * * * * * (55358) H P F PLUNGER, MAGAZINE SPRING: EA 1 * * * * * * * * (55358) H P F SPRING, MAGAZINE EA 1 * * * * * * * * (55358) H P F PIN, MAGAZINE EA 1 * * * * * * * * (55358) H P F FOLLOWER, MAGAZINE: EA 1 * * * * * * * * (55358) H P F TUBE, MAGAZINE: EA 1 * * * * * * * * (55358) H BARREL GROUP P F SCREW, MUZZLE BRAKE: EA 1 * * * * * * * * (55358) F P F BRAKE MUZZLE: EA 1 * * * * * * * * (55358) F P F MUZZLE, FALSE: EA 1 * * * * * * * * (55358) F P F WEIGHT, BARREL, 3/8 OUNCE: EA 1 * * * * * * * * (55358) F OR P F WEIGHT, BARREL, 1-3/4 OUNCE: EA 1 * * * * * * * * 6505(55358) F P F PIN, PIVOT, REAR SIGHT: EA 1 * * * * * * * * (55358) H P F SIGHT ASSEMBLY, REAR: EA 1 * * * * * * * * (55358) F P F CLIP PIVOT, REAR SIGHT: EA 1 * * * * * * * * (55358) H P F SCREW, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (55358) H 27

26 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F SPRING, PLUNGER, REAR SIGHT: EA 2 * * * * * * * * (55358) H P F PLUNGER, REAR SIGHT ELEVATING NUT AND WINDAGE EA 2 * * * * * * * * SCREW: 5104(55358) H P F NUT, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (55358) H P F SLIDE, REAR SIGHT: EA 1 * * * * * * * * (55358) H P F NUT, ELEVATING, REAR SIGHT: EA 1 * * * * * * * * (55358) H P F STUD, ELEVATING, REAR SIGHT: EA 1 * * * * * * * * (55358) H P F CLIP, SPRING, REAR SIGHT: EA 1 * * * * * * * * (55358) H P F SPRING, ELEVATING, REAR SIGHT: EA 1 * * * * * * * * (55358) H P F BASE, REAR SIGHT: EA 1 * * * * * * * * , 53 (35358 I F P F BARREL, 7-3/8-INCH: W/FRONT SIGHT: EA 1 * * * * * * * * (55358) F SLIDE ASSEMBLY P F GUIDE, RECOIL SPRING: EA 1 * * * * * * * * (55358) H P F SPRING, RECOIL: EA 1 * * * * * * * * (55358) H P F PIN, BOLT: EA 1 * * * * * * * * (55358) H P F PIN, FIRING: EA 1 * * * * * * * * (55358) H P F SPRING, FIRING PIN: EA 1 * * * * * * * * (55358) H P F BOLT: EA 1 * * * * * * * * (55358) H P F EXTRACTOR: EA 1 * * * * * * * * (5358) F P F PLUNGER, EXTRACTOR: EA 1 * * * * * * * * (55358) H P F SPRING, EXTRACTOR: EA 1 * * * * * * * * (55358) H 28

27 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F SLIDE: EA 1 * * * * * * * * (55358) F RECEIVER GROUP P F SCREW, STOCK: EA 2 * * * * * * * * (55358) H C P F GRIP, LEFT HAND AND RIGHT HAND: WALNUT WITH SCREWS EA 2 * * * * * * * * (55358) F P F PIN, RETAINER, MAINSPRING: EA 1 * * * * * * * * (53358) H P F RETAINER, MAINSPRING: EA 1 * * * * * * * * (55358) H P F MAINSPRING: EA 1 * * * * * * * * (55358) H P F SCREW, SPRING PLATE, MANUAL SAFETY: EA 1 * * * * * * * * (55358) H P F PLATE, SPRING, MANUAL SAFETY: EA 1 * * * * * * * * (55358) H P F SAFETY, MANUAL: EA 1 * * * * * * * * (55358) H P F PIN, STIRRUP: EA 1 * * * * * * * * (55358) H P F STIRRUP: EA 1 * * * * * * * * (55358) H P F HAMMER: EA 1 * * * * * * * * (55358) F P F SPRING, INDICATOR: EA 1 * * * * * * * * (55358) F P F INDICATOR: EA 1 * * * * * * * * (55358) F P F DISCONNECTOR, MAGAZINE: EA 1 * * * * * * * * (55358) H P F: SPRING, DISCONNECTOR, MAGAZINE: EA 1 * * * * * * * * (55358) H P F BAR, TRIGGER: EA 1 * * * * * * * * (55358) H P F SPRING, TRIGGER BAR: EA 1 * * * * * * * * (55358) H P F PIN, SEAR: EA 1 * * * * * * * * (55358) H 29

28 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F SPRING, SEAR: EA 1 * * * * * * * * (55358) H P F SEAR: EA 1 * * * * * * * * (55358) H P F PIN GUARD AND TRIGGER: EA 2 * * * * * * * * (55358) H P F GUARD: EA 1 * * * * * * * * (55358) H P F SCREW, TRIGGER STOP: EA 1 * * * * * * * * (55358) H P F CAM, PAWL: EA 1 * * * * * * * * (55358) HI P F PLUNGER, PAWL CAM: EA 1 * * * * * * * * (55358) H P F SPRING, PAWL CAM: EA 1 * * * * * * * * (55358) H P F PIN, PAWL: EA 1 * * * * * * * * (55358) H P F PAWL: EA 1 * * * * * * * * (55358) H P F SPRING, TRIGGER AND PAWL: EA 1 * * * * * * * * (55358) H P F TRIGGER: EA 1 * * * * * * * * (55358) H P F LEVER, ADJUSTING, TRIGGER PULL: EA 1 * * * * * * * * (55358) F P F STOP ASSEMBLY, SLIDE AND EJECTOR: EA 1 * * * * * * * * SPRING, SLIDE STOP: EA 1 * * * * * * * * (55358) H X1 F... STOP, SLIDE AND EJECTOR H EA P F NUT, MAGAZINE CATCH: EA 1 * * * * * * * * (55358) H P F CATCH, MAGAZINE: EA 1 * * * * * * * * (55358) H P F PLUNGER, MAGAZINE CATCH: EA 1 * * * * * * * * (55358) H P F SPRING, MAGAZINE CATCH: EA 1 * * * * * * * * (55358) H X... RECEIVER: H EA

29 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP PISTOL, CALIBER.22, AUTOMATIC: SMITH AND WESSON, MODEL 46 MAJOR GROUPS AND ASSEMBLIES P O MAGAZINE, ASSEMBLY: EA 1 REF REF REF REF REF REF REF REF (55358) H A F... BARREL GROUP G EA A F... SLIDE ASSEMBLY: G EA A F... RECEIVER GROUP: G EA MAGAZINE ASSEMBLY P F PLATE, BUTT, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PLUNGER, MAGAZINE SPRING: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PIN, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (55358) H P F FOLLOWER, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (55358) H P F )9 TUBE, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (55358) H BARREL GROUP P F PIN, PIVOT, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) H A F... SIGHT ASSEMBLY, REAR: EA G P F CLIP, PIVOT, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SCREW, WINDAGE, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (5558) H P F SPRING, PLUNGER, REAR SIGHT: EA 2 REF REF REF REF REF REF REF REF (55358) H P F PLUNGER, REAR SIGHT: EA 2 REF REF REF REF REF REF REF REF (55358) H P F NUT, WINDAGE, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SLIDE, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) H P F NUT, ELEVATING, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) H P F STUD, ELEVATING REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) H 31

30 Section IV. REPAIR PARTS LIST -Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F CLIP, SPRING, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, ELEVATING. REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) H P F BASE, REAR SIGHT: EA 1 * * * * * * * * (55358) G P F BARREL, 7-INCH WITH FRONT SIGHT: EA 1 * * * * * * * * (55358) G SLIDE ASSEMBLY P F GUIDE, RECOIL SPRING: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, RECOIL: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PIN, BOLT: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PIN, FIRING: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, FIRING PIN: EA 1 REF REF REF REF REF REF REF REF (55358) H P F BOLT: EA 1 REF REF REF REF REF REF REF REF (55358) H P F EXTRACTOR: EA 1 * * * * * * * * (55358) G P F PLUNGER, EXTRACTOR: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, EXTRACTOR: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SLIDE: EA 1 * * * * * * * * (55358) G RECEIVER GROUP P F SCREW, STOCK: EA 1 REF REF REF REF REF REF REF REF (55358) H C P F STOCK, LEFT HAND AND RIGHT HAND: EA 2 REF REF REF REF REF REF REF REF (55358) G P F PIN, RETAINER, MAINSPRING: EA 1 REF REF REF REF REF REF REF REF (55358) H P F RETAINER, MAINSPRING: EA 1 REF REF REF REF REF REF REF REF (55358) H P F MAINSPRING: EA 1 REF REF REF REF REF REF REF REF (55358) H 32

31 Section IV. REPAIR PARTS LIST - Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F SCREW, SPRING PLATE, MANUAL SAFETY: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PLATE, SPRING, MANUAL SAFETY: EA 1 REF REF REF REF REF REF REF REF (55358) H C P F SAFETY, MANUAL: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PIN, STIRRUP: EA 1 REF REF REF REF REF REF REF REF (55358) H P F STIRRUP: EA 1 REF REF REF REF REF REF REF REF (55358) H C P F HAMMER: EA 1 REF REF REF REF REF REF REF REF (55358) H P F DISCONNECTOR, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, DISCONNECTOR, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (55358) H P F BAR TRIGGER: EA I REF REF REF REF REF REF REF REF (55358) H P F SPRING, TRIGGER BAR: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PIN, SEAR: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, SEAR: EA 1 REF REF REF REF REF REF REF REF (66358) H P F SEAR: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PIN-GUARD AND TRIGGER: EA 2 REF REF REF REF REF REF REF REF (55358) H P F GUARD: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SCREW, TRIGGER STOP: EA 1 REF REF REF REF REF REF REF REF (55358) H P F CAM PAWL: EA 1 REF REF REF REF REF REF REF REF (55358) W P F PLUNGER, PAWL CAM: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, PAWL CAM: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PIN, PAWL: EA 1 REF REF REF REF REF REF REF REF (55358) H 33

32 Section IV. REPAIR PARTS LIST - Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F PAWL: EA 1 REF REF REF REF REF REF REF REF (53358) H P F SPRING, TRIGGER AND PAWL: EA 1 REF REF REF REF REF REF REF REF (55358) H C P F TRIGGER: EA 1 REF REF REF REF REF REF REF REF (55358) H C P F STOP ASSEMBLY, SLIDE AND EJECTOR: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING SLIDE STOP: EA 1 REF REF REF REF REF REF REF REF (55358) H X1 F... STOP, SLIDE, EJECTOR: H EA P F NUT, MAGAZINE CATCH: EA 1 REF REF REF REF REF REF REF REF (55358) H P F CATCH, MAGAZINE: EA 1 REF REF REF REF REF REF REF REF (55358) H P F PLUNGER MAGAZINE CATCH: EA 1 REF REF REF REF REF REF REF REF (55358) H P F SPRING, MAGAZINE CATCH: EA 1 REF REF REF REF REF REF REF REF (55358) H X... RECEIVER: H EA PISTOL, CALIBER.38, AUTOMATIC: SMITH AND WESSON, MODEL 52 MAJOR GROUPS AND ASSEMBLIES P O MAGAZINE ASSEMBLY: EA 1 * * * * * * * * (55358) I A F... STOP ASSEMBLY SLIDE: I EA A F... SLIDE AND BARREL GROUP: I EA A F... RECEIVER ASSEMBLY: I EA MAGAZINE ASSEMBLY P F PLATE, BUTT, MAGAZINE: EA 1 * * * * * * * * (55358) I P F CATCH, MAGAZINE, BUTT PLATE: EA 1 * * * * * * * * (55358) I P F SPRING, MAGAZINE: EA 1 * * * * * * * * (55358) I P F PIN, MAGAZINE: EA 1 * * * * * * * * (55358) I P F FOLLOWER, MAGAZINE: EA 1 * * * * * * * * (55358) I P F TUBE, MAGAZINE: EA 1 * * * * * * * * (55358) I 34

33 Section IV. REPAIR PARTS LIST - Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP SLIDE AND BARREL GROUP P F BUSHING, BARREL: EA 1 * * * * * * * * (55358) I P F PLATE, BARREL BUSHING: EA 1 * * * * * * * * (55358) I P F SPRING, RECOIL: EA 1 * * * * * * * * (55358) I P F PLUNGER, BARREL BUSHING: EA 1 * * * * * * * * (55358) I P F SPRING, PLUNGER, BARREL BUSHING: EA 1 * * * * * * * * (55358) I P F GUIDE, RECOIL SPRING: EA 1 * * * * * * * * (55358) I P F BARREL: 5-INCH: EA 2 * * * * * * * * (55358) I P F SAFETY, MANUAL: EA 1 * * * * * * * * (55358) I P F PIN, FIRING: EA 1 * * * * * * * * (55358) I P F SPRING, FIRING PIN: EA 1 * * * * * * * * (55358) I P F PLUNGER, MANUAL SAFETY: EA 1 * * * * * * * * (55358) I P F SPRING, PLUNGER. MANUAL SAFETY: EA 1 * * * * * * * * (55358) I P F EXTRACTOR: EA 1 * * * * * * * * (55358) I P F SIGHT ASSEMBLY, REAR: EA 1 * * * * * * * * (55358) I P F SCREW LOCK, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F SCREW, ELEVATION, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F WASHER, WAVY, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F PLUNGER, ELEVATION, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF (55358) J P F SPRING, PLUNGER, REARSIGHT EA 2 REF REF REF REF REF REF REF REF (55358) J P F SPRING: MAGAZINE CATCH AND REAR SIGHT BASE EA 2 * * * * * * * * (55358) I 35

34 Section IV. REPAIR PARTS LIST - Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F CLIP, SPRING, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F PIN, PIVOT, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F SCREW, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F PLUNGER, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F PIN, TRAVERSE, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F NUT, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F SLIDE, REAR SIGHT: EA 1 * * * * * * * * (53358) I P F SPRING, WINDAGE, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F BODY, REAR SIGHT: EA 1 * * * * * * * * (55358) I.P F BASE, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F NUT, ELEVATION, REAR SIGHT: EA 1 * * * * * * * * (55358) I P F SPRING, PLUNGER, EJECTOR DEPRESSOR: EA 1 * * * * * * * * (55358) I P F PLUNGER, EJECTOR DEPRESSOR: EA 1 * * * * * * * * (55358) I P F SLIDE: WITH FRONT SIGHT: EA 1 * * * * * * * * (55358) RECEIVER ASSEMBLY P F SCREW, GRIP: EA 2 * * * * * * * * (55358) 1 C P F GRIP, PISTOL: RIGHT AND LEFT HAND, WALNUT: EA 1 * * * * * * * * (19204) I P F PIN, INSERT AND TRIGGER: EA 2 * * * * * * * * (55358) I P F INSERT: EA 1 * * * * * * * * (55358) I P F MAINSPRING: EA 1 * * * * * * * * (55358) I P F PLUNGER, MAINSPRING: EA 1 * * * * * * * * (55358) I 36

35 Section IV. REPAIR PARTS LIST - Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F PLATE, SIDE: EA 1 * * * * * * * * (55358) I P F DEPRESSOR, EJECTOR AND MAGAZINE: EA 1 * * * * * * * * (55358) I P F SPRING, EJECTOR: EA 1 * * * * * * * * (55358) 1 P F HAMMER: EA 1 * * * * * * * * (55358) I P F t PIN, STIRRUP: EA 1 * * * * * * * * (55358) 1 P F STIRRUP: EA 1 * * * * * * * * (55358) 1 P F PIN, SEAR: EA 1 * * * * * * * * (55358) 1 P F SEAR: EA 1 * * * * * * * * (55358) I P F PIN: SEAR AND SLIDE STOP PLUNGER: EA 2 * * * * * * * * (55358) I P F PLUNGER, SEAR: EA 1 * * * * * * * * (55358) I P F SPRING, SEAR PLUNGER: EA 1 * * * * * * * * (55358) I P F DRAWBAR: EA 1 * * * * * * * * (55358) I P F PLUNGER, DRAWBAR: EA 1 * * * * * * * * (55358) I P F SPRING, DRAWBAR PLUNGER: EA 1 * * * * * * * * (55358) I P F SPRING, TRIGGER PLAY: EA 1 * * * * * * * * (55358) I P F SCREW, LOCKOUT, DOUBLE ACTION: EA 1 * * * * * * * * (55358) I P F TRIGGER: EA 1 * * * * * * * * (55358) I P F PIN, TRIGGER PLUNGER: EA 1 * * * * * * * * (55358) I P F PLUNGER., TRIGGER: EA 1 * * * * * * * * (55358) I P F SPRING, TRIGGER PLUNGER: EA 1 * * * * * * * * (55358) I P F DISCONNECTOR: EA 1 * * * * * * * * (55358) I 37

36 Section IV. REPAIR PARTS LIST - Continued (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP P F PIN, DISCONNECTOR: EA 1 * * * * * * * * (55358) I P F NUT, MAGAZINE CATCH: EA 1 * * * * * * * * (55358) I P F PLUNGER, MAGAZINE CATCH: EA 1 REF REF REF REF REF REF REF REF (55358) J P F SPRING: MAGAZINE CATCH AND REAR SIGHT BASE: EA 1 REF REF REF REF REF REF REF REF (55358) I P F CATCH, MAGAZINE: EA 1 * * * * * * * * (55358) I P F STUD, FRAME: EA 1 * * * * * * * * (55358) I P F BUTTON, SLIDE TOP- EA 1 * * * * * * * * (55358) I X... RECEIVER: I EA P F STOP, SLIDE: EA 1 * * * * * * * * (55358) I P F PLUNGER, SLIDE STOP: EA 1 * * * * * * * * (55358) I P F SPRING, PLUNGER, SLIDE STOP- EA 1 * * * * * * * * (55358) I P F SCREW, TRIGGER STOP: EA 1 * * * * * * * * (55358) I 38

37 Section V. SPECIAL TOOLS LIST (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) UNIT 30 DAY DS MAINT 30-DAY GS MAINT DESCRIPTION OF QTY ALLOWANCE ALLOWANCE 1-YR DEPOT ILLUSTRATION FEDERAL MEAS UNIT INC (a) (b) (c) (a) (b) (c) ALW PER MAINT (a) (b) SMR STOCK OF IN 100 ALW PERFIGURE ITEM CODE NUMBER MEAS UNIT EQUIP 100 NO. NO/ REFERENCE NUMBER & MFR. CODE USABLE ON CODE CNTGCY EQUIP TOOLS AND EQUIPMENT TOOLS AND EQUIPMENT ARE AUTHORIZED FOR CALIBER.32 PISTOL ONLY P O BRUSH, CLEANING, SMALL ARMS: BORE EA * * * * * * * * (19205) P O ROD, CLEANING, SMALL ARMS: M4 EA * * * * * * * * (19204) 39

38 Figure 8. Tools and equipment for Colt Cal. 32 automatic pistol. 40

39 Figure 9. Major groups and assemblies-- Gold Cup National Match Colt cal.38 automatic pistol. 41

40 Figure 10. Magazine assembly for Gold Cup National Match Colt cal..38 automatic pistol-exploded view 42

41 Figure 11. Slide group for Gold Cup National Match Colt cal..38 automatic pistol-exploded view. 43

42 Figure 12. Receiver group for Gold Cup National Match Colt cal. 38 and cal.,.45 automatic pistol-exploded view. 44

43 WE Figure 13. Major groups and assemblies-gold Cup National Match Colt cal..45 automatic pistol- exploded view. 45

44 WE Figure 14. Magazine assembly for Gold Cup National Match Colt cal, 45 automatic pistol-exploded view. Figure 15. Slide group for Gold Cup National Match Colt cal..45 automatic pistol-exploded view. 46

45 Figure 16. Magazine assembly-model M Colt cal. 32 automatic pistol 47