CATALOG OF REPLACEMENT PARTS

Transcription

1 CATALOG OF REPLACEMENT PARTS HLX SERIES SCALE Scale/Printer ML ML ML ML ML ML ML ML ML ML Printer ML ML ML ML ML ML ML Hanging Scale/Printer ML Self Service Scale/Printer ML ML Scale/Printer with GCD ML ML ML ML A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO FORM Rev. G (May 2015)

2 F Rev. G (May 2015) HOBART 2015

3 Table of Contents 5 CONSOLE 7 WEIGHER COMPONENTS 9 MAIN CIRCUIT COMPONENTS 11 POWER SUPPLY 13 PRINTER 15 CASSETTE (WIDE LABEL) 17 CASSETTE (NARROW LABEL) 19 PRINTER ONLY (ML-29287) (USED WITH TWO-PIECE SCALE/PRINTER) 21 SCALE UNIT (USED WITH ML-29287) (USED WITH TWO-PIECE SCALE/ PRINTER) 23 HANGING SCALE SUPPORT UNIT (ML-29288) 25 PAN AND ARM (ML-29288) 27 STATIONARY MOUNT ASSEMBLY (USED WITH HANGING SCALE) 29 MOVEABLE MOUNT ASSEMBLY (USED WITH HANGING SCALE) 31 ELEVATED DISPLAY OPTION 33 RFID OPTION 35 SELF SERVICE STAND (ML-29309) 37 GRAPHICAL CUSTOMER DISPLAY PARTS F Rev. G (May 2015)

4 CONSOLE F Rev. G (May 2015) - 4 -

5 ILLUS. PL CONSOLE PART NO. NAME OF PART AMT Display & Cable Assy. (LCD) (10.4 In.) Cable & Plug Assy Shield - Console PCB (Mylar) Board Assy. - Console SC Mach. Screw 6-32 x 1/4 Phil. Pan Hd Spring - Latch Return Arm - Console Button - Console Latch Tape - Foam Ferrite - Flat Cable Cable (Console to Main Board) Label - Notice (Mercury) SD Self-Tapping Screw 6-19 x 1/2 Phil. Pan Hd Housing - Rear Console (Dark Gray) Housing - Rear Console (Black) (Units Starting With Serial Number ) Label - Notice (Mercury) Bracket Assy. - Display Mounting SD Self-Tapping Screw 6-19 x 5/16 Phil. Pan Hd SC Mach. Screw 4-40 x 1/4 Phil. Pan Hd. (SST) Mask - Display Gasket Gasket - Display (Behind The Touchscreen, Thick Gasket) Touchscreen Assy. (5-Wire, 90-Deg. Turn In Cable) Gasket - Touchscreen (Front Of The Touchscreen, Thin Gasket) Housing - Front Console (With Pins) (Dark Gray) Housing - Front Console (Black) (Units Starting With Serial Number ) Plate - Logo Display Assy. (LED) (Current Construction) (HLX GCD Scales Starting S/N ; All other HLX Scales Starting S/N ) F Rev. G (May 2015)

6 WEIGHER COMPONENTS F Rev. G (May 2015) - 6 -

7 ILLUS. PL WEIGHER COMPONENTS PART NO. NAME OF PART AMT. 1 SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd Platter Assy Cover - Level Bubble (Incls. Foam Gasket) Housing - Main (Black) (Units Starting With Serial Number ) Mount - Platter Platter - Sub Level - Spirit Tape - Level Screen Assy. - Display (Customer) SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT Board Assy. - VF Display Bracket - VFD Mounting WL Lockwasher 1/4 Internal Load Cell - Multiple Range (15 kg) Cable Assy. (Customer Display) SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT Foot Assy Cover - Cable Hole Plate - Remote Weigher Tape Base - Main Plate Assy. - SM Port Standoff (Housing Mount) Label - Battery WL Lockwasher 1/4 Internal SC Cap Screw 1/4-20 x 5/8 Hex Socket Hd Shield - Infrared Screw - Overload (Stop) SC Cap Screw 1/4-20 x 1-5/8 Hex Socket Hd F Rev. G (May 2015)

8 MAIN CIRCUIT COMPONENTS F Rev. G (May 2015) - 8 -

9 ILLUS. PL MAIN CIRCUIT COMPONENTS PART NO. NAME OF PART AMT Board Assy. - Wired Adapter SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd Board Assy. - Wireless Adapter Card - Wireless Cisco CB21AG (WEP, WPA, & WPA2 Security)...AR Card - Wireless Symbol LA4137 (Use with Adapter) (WEP & WPA Security)...AR Adapter - PCMIA to CF (For Card - Wirless Symbol LA4137)...AR Card - Cisco 352 (WEP Security Only)...AR Standoff - Cardbus Mounting SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT Board Assy. - Main SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd Board Assy. (512 MB DDR PC3200) SD Self-Tapping Screw 8-18 x 1/4 Phil. Bndg. Hd., Type B Speaker Assy Bracket Assy. - Main Board Cover - Service Switch Access Plate - USB Cover WL Lockwasher #8 Helical Screw (Special Fil. Hd.) Plug - USB Type A Seal - Power / Reset Button Drive - Compact Flash (Recovery) Battery - Lithium Coin (CR2032) Standoff - Main PCB Bracket - ECB Blank SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT Cover - Antenna Label - Connector...1 * Hard Drive - Recovery (Lowe's) Recovery Compact Flash (Walmart/Samls CLub) Drive - Compact Flash (Recovery) (Standard Self Serve) Drive - Compact Flash (Recovery) (Extended Self Serve) Kit - Security Seal (Incls. Items 12, 14, & 15) Seal - Wire Roto (8 In.) (Walmart)...1 * Customer Unique Recovery Hard Drive F Rev. G (May 2015)

10 POWER SUPPLY F Rev. G (May 2015)

11 ILLUS. PL POWER SUPPLY PART NO. NAME OF PART AMT Cord - Power (120 V.) Power Supply & Baffle Assy WL Lockwasher #8 Internal Shakeproof SC Mach. Screw 8-32 x 1-1/4 Phil. Pan Hd Fan Assy Shroud - Power Supply SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT Cable Assy. - DC Power SD Self-Tapping Screw 6-32 x 3/8 Phil. Pan Hd., Type TT FE Fuse (250 V., 3.0 Amp.) (SLO) (Power Input Board) Board - Power Input (Incls. Item 11) PB Plug - Button (1/2 In.) F Rev. G (May 2015)

12 PRINTER F Rev. G (May 2015)

13 ILLUS. PL PRINTER PART NO. NAME OF PART AMT. 1 NS Stop Nut Hex (SST) Stud - Adjusting Bushing - Stud Bracket - Spring Pivot Bushing - Nyliner SD Self-Tapping Screw 8-32 x 1-3/4 Phil. Pan Hd., Type TT SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd WL Lockwasher #8 Internal Shakeproof Roller - Pivot Arm Retainer - Roller Shaft - Printhead Pivot Cable - Printhead Pivot Block - Printhead Bushing - Nyliner Sleeve - Pivot Printhead - Thermal Motor Assy. - Stepper SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT Belt - Timing Pulley - Take-Up Motor SC Set Screw 8-32 x 1/4 Hdls. Cup Pt Adhesive - Loctite AR Shaft - Pulley & Gear Bushing Pulley & Gear Assy. (Incls. Items 24 & 26) Bushing SC Cap Screw 6-32 x 1/2 Hex Socket Hd WL Lockwasher #6 Internal Shakeproof Plate - Pivot Spring - Printhead Adjusting SC Cap Screw 6-32 x 3/4 Hex Socket Hd WL Lockwasher #6 Internal Shakeproof WS Washer (SST) Bushing Bushing - Gear Adjusting NS Stop Nut 6-32 Hex Label - Anti-Friction Bracket - Label Taken Mtg Sensor Assy. - Label Taken Bracket - Label Taken WL Lockwasher #8 Internal Shakeproof SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT SD Self-Tapping Screw 6-32 x 1/4 Phil. Pan Hd., Type TT Stop - Printhead Lower Heat Sink and Bushing Assy. (Incls. Item 48) Thermo Joint Compound (2 oz.)...ar Bushing RR Retaining Ring 1/4 In. (SST) Tearbar SD Self-Tapping Screw 6-32 x 1/4 Phil. Pan Hd., Type TT SA Screw Assy. M3 x 0.5 x 12 mm Phil. Pan Hd Stop - Printhead Upper SD Self-Tapping Screw 6-32 x 1/4 Phil. Pan Hd., Type TT Wire - Drain (Ground) SD Self-Tapping Screw 6-32 x 1/4 Phil. Pan Hd., Type TT Spring - Printhead Spring - Printhead Adjusting Tie - Cable Locking Spring - Extension F Rev. G (May 2015)

14 CASSETTE (WIDE LABEL) F Rev. G (May 2015)

15 ILLUS. PL CASSETTE (WIDE LABEL) PART NO. NAME OF PART AMT Plate - Cassette Locating (Upper) Mach. Screw 8-32 x 3/8 Phil. Pan Hd Retaining Plate - Roller Guide - Label Reflector Take-Up Assy Needle Bearing Base - Cassette Spring - Cassette Eject Label - Threading Instructions SA Screw Assy x 3/8 Phil. Pan Hd Rail - Guide (RH) SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT WS Washer (Previous Construction) Rivet - Snap (Nylon) (Previous Construction) Bushing Cover - Cassette Front (Dark Gray) Cover - Cassette Front (Black) (Units Starting With Serial Number ) Gear - Take-Up (Incls. Set Screw) Spring - Cassette Latch Guide - Cassette SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT NS Nut 8-32 Sq. Hd Cap Screw 8-32 x 1-3/4 Hex Socket Hd Washer - Wavy Latch - Cassette Pivot Block - Adjust Shaft - Idler Ball Bearing - Double-Shielded Radial Washer Gear - Idler (Incls. Item 32) Bushing Gear - Roller (Incls. Set Screw) SC Mach. Screw 8-32 x 1/2 Phil. Pan Hd Plate - Cassette Locating (Lower) Kit - Media Hall Sensor (Incls. Item 52) Insulator - Media Sensor Board SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT Rail - Guide (LH) SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT Spring - Label Guide SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT Bearing - Flange Washer Standoff Standoff Roller - Print Washer Bushing Peel Bar Board Assy. - Sensor (Previous Construction) Magnet - Disc Mach. Screw 8-32 x 1/8 Phil. Pan Hd Cassette - Assembly Black F Rev. G (May 2015)

16 CASSETTE (NARROW LABEL) F Rev. G (May 2015)

17 ILLUS. PL CASSETTE (NARROW LABEL) PART NO. NAME OF PART AMT Plate - Cassette Locating (Upper) Mach. Screw 8-32 x 3/8 Phil. Pan Hd Retaining Plate - Roller Guide - Label Spacer - Narrow Label Take-Up Assy Needle Bearing Reflector Base - Cassette Spring - Cassette Eject Label - Threading Instructions SA Screw Assy x 3/8 Phil. Pan Hd SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT Rail - Guide (RH) Bushing WS Washer (Previous Construction) Rivet - Snap (Nylon) (Previous Construction) Cover - Cassette Front (Dark Gray) Cover - Cassette Front (Black) (Units Starting With Serial Number ) Gear - Take-Up (Incls. Set Screw) Spring - Cassette Latch Guide - Cassette SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT NS Nut 8-32 Sq. Hd Cap Screw 8-32 x 1-3/4 Hex Socket Hd Washer - Wavy Latch - Cassette Pivot Block - Adjust Shaft - Idler Ball Bearing - Double-Shielded Radial Washer Gear - Idler (Incls. Item 33) Bushing Gear - Roller (Incls. Set Screw) SC Mach. Screw 8-32 x 1/2 Phil. Pan Hd Plate - Cassette Locating (Lower) Kit - Media Hall Sensor (Incls. Item 55) Insulator - Media Sensor Board SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT Rail - Guide (LH) SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT Spring - Label Guide SD Self-Tapping Screw 8-32 x 3/8 Phil. Pan Hd., Type TT Bearing - Flange Spacer - Narrow Roller Bottom Roller - Print Spacer - Narrow Roller Support - Roller Standoff Standoff Washer Bushing Peel Bar Board Assy. - Sensor (Previous Construction) Magnet - Disc Mach. Screw 8-32 x 1/8 Phil. Pan Hd Cassette Assy. - Narrow Label F Rev. G (May 2015)

18 PRINTER ONLY (ML-29287) (USED WITH TWO-PIECE SCALE/PRINTER) F Rev. G (May 2015)

19 ILLUS. PL PRINTER ONLY (ML-29287) (USED WITH TWO-PIECE SCALE/PRINTER) PART NO. NAME OF PART AMT Plug - Cover SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd Cover - Printer Top (Black) (Units Starting With Serial Number ) Label - Printer Bracket Assy. - Cover Cable Assy F Rev. G (May 2015)

20 SCALE UNIT (USED WITH ML-29287) (USED WITH TWO-PIECE SCALE/PRINTER) F Rev. G (May 2015)

21 ILLUS. PL SCALE UNIT (USED WITH ML-29287) (USED WITH TWO-PIECE SCALE/PRINTER) PART NO. NAME OF PART AMT. 1 SC Set Screw x 3/8 Hex Hdls., Socket Hd Support - Platter SC Mach. Screw x 1/2 Phil. Pan Hd WL Lockwasher #10 Helical Stop - Loadcell Level - Spirit SC Cap Screw 1/4-20 x 5/8 Hex Hd NS Nut Square SC Set Screw x 3/8 Hex Hdls., Socket Hd Foot - Leveling Screw Base Assy Holder - Tie-Down SC Mach. Screw 8-32 x 1/2 Slotted Flat Hd. (SST) Label - Capacity Clamp - Cable SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd WS Washer (SST) Clamp Cable - Scale WL Lockwasher #8 Helical NS Nut 8-32 Hex SC Mach. Screw 8-32 x 3/8 Phil. Pan Hd WL Lockwasher #8 Helical Mount - Cable Tie Tie - Cable (4 In. Long) Load Cell - Multiple Range (15 kg) SC Cap Screw 1/4-20 x 1-5/8 Hex Socket Hd WL Lockwasher 1/4 Light Plug - Transparent (1/2) NS Nut Square SC Set Screw x 3/8 Hex Hdls., Socket Hd Platter (Incls. Items 34 & 35) Platter (Incls. Items 34 & 35) Fastener - Dual Lock Fastener - Dual Lock Contact - Compression Spring (Qty. of 8)...AR F Rev. G (May 2015)

22 HANGING SCALE SUPPORT UNIT (ML-29288) F Rev. G (May 2015)

23 ILLUS. PL HANGING SCALE SUPPORT UNIT (ML-29288) PART NO. NAME OF PART AMT Detent - Lower SC Mach. Screw x 1/2 Phil. Flat Hd Detent - Support RR Retaining Ring Bearing (Nyliner) Cap - Upper Tube Tube - Lower Hanger Shaft - Lower Tube Tubing Assy. - Support SC Mach. Screw 1/4-20 x 5/8 Slotted Truss Hd. (SST) Plug - Tube Base Plate SC Mach. Screw 1/4-20 x 5/8 Slotted Truss Hd. (SST) Gasket - Spacer SC Cap Screw 1/4-20 x 1-5/8 Hex Socket Hd WL Lockwasher 1/4 Helical (SST) WS Washer Ball - Pivot O-Ring Spacer - Ball Pivot Spacer NS Nut 8-32 Hex SC Set Screw 8-32 x 1/2 Slotted Hdls., Cup Pt Screw - Overload Platter - Support Gasket - Base Cord Assy. - Power Cap - Support Tube Shaft - Upper Tube Tube Assy. - Upper SC Mach. Screw x 1/2 Phil. Pan Hd WL Lockwasher #10 External Shakeproof (SST) Clip F Rev. G (May 2015)

24 PAN AND ARM (ML-29288) F Rev. G (May 2015)

25 ILLUS. PL PAN AND ARM (ML-29288) PART NO. NAME OF PART AMT Pan (2-In. Deep) Pan (1-In. Deep) (Shown) Ring - Pan Support SC Mach. Screw x 5/8 Slotted Oval Hd Cup - Swivel SC Mach. Screw x 5/8 Slotted Oval Hd NS Nut Hex (SST) Arm - Support (10 In.) Arm - Support (15 In.) Arm Assy. - Pan (10 In.) (Incls. Items 3 thru 8) Arm Assy. - Pan (15 In.) (Incls. Items 3 thru 7 & 9) F Rev. G (May 2015)

26 STATIONARY MOUNT ASSEMBLY (USED WITH HANGING SCALE) F Rev. G (May 2015)

27 ILLUS. PL STATIONARY MOUNT ASSEMBLY (USED WITH HANGING SCALE) PART NO. NAME OF PART AMT Plate - Mounting NS Lock Nut 1/ Spring - Trolley Tube Assy. (6 Ft.) Tube Assy. (9 Ft.) WL Lockwasher 1/4 Helical SC Cap Screw 1/4-20 x 1-5/8 Hex Hd FE Bushing - Split (Electrical) WL Lockwasher #10 Helical SC Mach. Screw x 3/8 Slotted Pan Hd FE Receptacle - Electrical FE Cover - Electrical FE Box - Conduit Plate - Spacer F Rev. G (May 2015)

28 MOVEABLE MOUNT ASSEMBLY (USED WITH HANGING SCALE) F Rev. G (May 2015)

29 ILLUS. PL MOVEABLE MOUNT ASSEMBLY (USED WITH HANGING SCALE) PART NO. NAME OF PART AMT. 1 RR Retaining Ring Stop - Trolley Tubing - Trolley Stop SC Mach. Screw 1/4-20 x 1 Slotted Flat Hd. (SST) WL Lockwasher 1/4 Helical Wheel Assy. - Trolley NS Jam Nut 1/4-20 Hex (SST) Frame - Trolley Track - Scale Mount SC Mach. Screw x 3/8 Slotted Pan Hd WL Lockwasher #10 Helical Spring - Flat Spring - Flat Spring - Underfolder Limiter - Release Tube Assy. (6 Ft.) Pin - Spring Ring - Brake Chain - Brake Ring - Brake Sleeve - Brake Release Pin - Brake Release Guide - Brake Release RR Retaining Ring FE Bushing - Split (Electrical) Guide - Brake Release WL Lockwasher #10 Helical SC Mach. Screw x 3/8 Slotted Pan Hd FE Cover - Electrical FE Receptacle - Electrical FE Box - Conduit SC Cap Screw 1/4-20 x 1 Hex Hd Spring - Trolley NS Nut 1/4-20 Hex WS Washer F Rev. G (May 2015)

30 ELEVATED DISPLAY OPTION F Rev. G (May 2015)

31 ILLUS. PL ELEVATED DISPLAY OPTION PART NO. NAME OF PART AMT Housing - Rear Elevated Display (Dark Gray) Housing - Rear Elevated Display (Black) (Units Starting With Serial Number ) Logo SD Self-Tapping Screw 6-19 x 5/16 Phil. Pan Hd SD Self-Tapping Screw 6-19 x 1/2 Phil. Pan Hd Baffle - Elevated Display SD Self-Tapping Screw 6-19 x 5/16 Phil. Pan Hd Bracket - VF Mount (Elevated Display) SD Self-Tapping Screw 6-19 x 5/16 Phil. Pan Hd Bracket - Filter (Elevated Display) Housing - Front Elevated Display (Dark Gray) Housing - Front Elevated Display (Black) (Units Starting With Serial Number ) SC Mach. Screw x 3/8 Phil. Pan Hd WL Lockwasher #10 Internal Shakeproof Bracket - Clamp Cable Assy. (Elevated Display) Panel - Rear Assy SD Self-Tapping Screw 8-32 x 1/2 Phil. Pan Hd., Type TT SC Cap Screw x 1 Hex Socket Hd Support - Elevated Display Post (12-1/8 Lg.) SC Mach. Screw 6-32 x 1/4 Phil. Truss Hd Display Assy. - Elevated F Rev. G (May 2015)

32 RFID OPTION F Rev. G (May 2015)

33 ILLUS. PL RFID OPTION PART NO. NAME OF PART AMT. * Board Assy. (RFID) Cable Assy. (RFID Antenna) Label (RFID FCC) Cable Assy. (RFID) SD Self-Tapping Screw 6-19 x 5/16 Phil. Pan Hd Kit - Compact Flash Card Recovery...AR * (When replacing the RFID Board Assembly on HLX Scale with an application version of or earlier, order Kit - Compact Flash Card Recovery.) F Rev. G (May 2015)

34 SELF SERVICE STAND (ML-29309) F Rev. G (May 2015)

35 ILLUS. PL SELF SERVICE STAND (ML-29309) PART NO. NAME OF PART AMT. 1 NS Nut 1/4-20 Hex (SST) SC Set Screw 1/4-20 x 5/8 Hdls. Slotted Oval Pt SC Mach. Screw 1/4-20 x 5/8 Hex Washer Hd. (SST) Stand Assy. - Upper Cover - Lower Stand FE Bushing - Electric Snap Stand Assy. - Lower F Rev. G (May 2015)

36 GRAPHICAL CUSTOMER DISPLAY PARTS F Rev. G (May 2015)

37 ILLUS. PL GRAPHICAL CUSTOMER DISPLAY PARTS PART NO. NAME OF PART AMT Logo - Hobart (Plate) Housing - Color (Customer Display) Gasket - Seal Display Gasket - Pressure Contact - Finger (2 Tab) Bracket - Display Mounting SD Self-Tapping Screw 6-19 x 1/4 Phil. Pan Hd Contact - Finger SC Mach. Screw 6-32 x 1/2 Phil. Pan Hd Cable Board - Control (GCD) Bracket - Rear Cover SD Self-Tapping Screw 6-19 x 5/16 Phil. Pan Hd Spacer - Mounting (GCD) SC Mach. Screw 8-32 x 7/8 Phil. Pan Hd Foot Assy Cable (USB A-STD Male to B-Micro Male)...1 * Compact Flash (Recovery - GCD, Scale)...1 * Micro SD (Recovery - GCD, Control board) Kit - Bracket & Audio Cable...1 ** Kit - Compact Flash Card Recovery...1 * (GCD Recovery cards for version or earlier.) ** (For version and later.) F Rev. G (May 2015)

38 FORM Rev. G MAY 2015 PRINTED IN U.S.A.