Flat type /Top view FDFU R Flat type /Side view FDFN R. Flat type /Flat view FDF R FD R FD R FD B

Transcription

1 Flexible type 5 Break-resistant type 5 Specifications (diffuse reflective type) /Top view /Side view /Flat view Sensing distance (mm) FDFU R 35 1 FDFN R FDF R FD R FD R 30 1 Min. sensing target 3 Ø Ø M6 Bolt FD R Ø0.04 FD B Ø3 Cylinder type FDC B FD B M6 Bolt FD B FD FD Ø R1 R5 R15 4 length 1m -40 to 60 Standard type Ø3 Cylinder type FDC Ø3 Cylinder type FDCS M6 Bolt M6 Bolt M6 Bolt FDS FDS FDS FDS FD FDS FDS Ø R (SUS part 10R) R30 Plastic FDP R30 30R (SUS part 10R) 2m -40 to 70 1: The sensing distance is a standard for BF5 Series. 2: The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX. 3: Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance 2. 4: cable out of the rated length can be customizable. 5: Flexible al fiber (Multi core) : A large number of ultra-fine cores are all surrounded by cladding. Easy to install the many places where are ing areas because the change of the intensity of radiation by ing is small. Break-resistant al fiber : The fiber s contain a large number of independent fine fibers, ensuring a high degree of flexibility. It can be used for moving parts(robot hand) and it is not easily broken. The sensing distance can be shortened about max. 20% than the normal according to condition of the cable.[(fc-3) should be used for cutting fiber cable.] B-41

2 Specifications (diffuse reflective type) Sensing distance (mm) Min. sensing target 3 4 length Coaxial type FD-320-F 40 2 FD-320-F M6 Bolt FD-620-F R15 R30 2m -40 to 70 Heat-resistant type M6 Bolt FD H Ø0.03 R30-40 to 105 M6 Bolt FD H to 150 GD H2 R m -40 to 250 GD H2 Right angle M6 Bolt FDR R Ø0.04 R1 1m Side view Ø3 Cylinder type FDCSN Ø R15 2m -40 to 60 Specifications (convergent reflective type) Sensing distance (mm) Min. sensing target 3 4 length Convergent reflective type Convergent reflective type FLF Ø R25 2m -40 to 60 1: The sensing distance is a standard for BF5 Series. 2: The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX. 3: Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance 2. 4: cable out of the rated length can be customizable. The sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.] is for BF5R, BF4R Series. B-42

3 Specifications (through-beam type) /Top view /Side view FTFU R FTFN R Sensing Min. distance sensing (mm) target length /Flat view FTF R Ø0.04 1m Flexible type 5 FTFB R /Top+Side view FTLU R Integrated bracket(l type) FTLU R /Top view FTLU R FT R Ø0.06 R1-40 to 60 Ø2 Cylinder type FTC R Ø0.3 Break-resistant type 5 FT R Ø0.5 Ø1.5 Cylinder type FT B FTC B Ø0.3 FT B Ø0.6 R5 2m 1: The sensing distance is a standard for BF5 Series. 2: The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX. 3: Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance 2. 4: cable out of the rated length can be customizable. 5: Flexible al fiber (Multi core) : A large number of ultra-fine cores are all surrounded by cladding. Easy to install the many places where are ing areas because the change of the intensity of radiation by ing is small. Break-resistant type al fiber : The fiber s contain a large number of independent fine fibers, ensuring a high degree of flexibility. It can be used for moving parts(robot hand) and it is not easily broken. The sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.] FT was discontinued. FT B is replacement. B-43

4 Specifications (through-beam type) Sensing distance (mm) Min. sensing target 3 length 4 FT Ø1.5 Cylinder type FTC R15 Ø2 Cylinder type FTC Ø2 Cylinder type FTCS Ø0.5 Standard type (35mm) FTS FTS FTS R15 (SUS part 10R) 2m -40 to 70 FT Ø3 Cylinder type FTC R30 Plastic FTP FTS FTS Ø1 R30 (SUS part 10R) Heat-resistant type FT H R30-40 to 105 FT H R50-40 to 150 GT H R25 2m -40 to 250 Right angle FTR R Ø0.5 R1 1m Side view Ø2.47 Cylinder type FTCSN Ø R15 2m -40 to 60 1: The sensing distance is a standard for BF5 Series. 2: The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX. 3: Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance 2. 4: cable out of the rated length can be customizable. The sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.] is for BF5R, BF4R Series. B-44

5 Model Diffuse reflective type Model Diffuse reflective type FDFU R M2-D0.5 / Hood material: SUS304 FDC B M3-D0.6 FDFN R M2-D0.5 / Hood material: SUS304 FD B M4-D0.6 FDF R M2-D0.5 / Hood material: SUS304 FD B M6-D1.3 FD M3-D0.5 FDC Ø3-D0.5 FD M4-D0.5 FDCS Ø3-D0.5 / SUS Ø1.5 15mm FD M6-D1.0 FDS M3-D0.5 / SUS Ø1.5 90mm FD B M3-D0.6 FDS M3-D0.5 / SUS Ø1.5 45mm B-45

6 Model Diffuse reflective type Model Diffuse reflective type FDS M4-D0.5 / SUS Ø1.5 90mm FD-320-F1 Co-axial M3 / Ø0.5, Ø (Emitter) (Emitter) (Receiver) FDS M4-D0.5 / SUS Ø1.5 45mm FD-620-F2 Co-axial M6 / Ø1.0, Ø (Receiver) (Emitter) (Receiver) FDS M6-D1.0 / SUS Ø2.5 90mm FD H M6-D1.0 / Heat-resistant 105 FDS M6-D1.0 / SUS Ø2.5 45mm FD H1 M6-D1.5 / Heat-resistant 150 FDP D1.0 2 / Plastic GD H2 M4-D0.05 / Heat-resistant 250 FD-320-F Co-axial M3 / Ø0.5, Ø GD H2 M6-D0.05 / Heat-resistant 250 Ø0.5(Emitter) 4-Ø0.25(Receiver) FDR R M6-D1.0 / Hood material: SUS303 FDCSN Ø3 / SUS Ø / Side view Ø Ø1 M6X Ø4 2-Ø2.2 B-46

7 Model Convergent reflective type FLF M3-D1.0 / convergent reflective type Model Through-beam type Model Through-beam type FTFU R M2-D0.5 / Hood material: SUS304 FT M3-D0.5 FTFN R M2-D0.5 / Hood material: SUS304 FTC Ø2-D0.5 FTF R M2-D0.5 / Hood material: SUS304 FT R M4-D1.0 FTFB R M2-D0.5 / Hood material: AL FT B M3-D0.6 FTLU R M2-D0.5 / Hood material: AL FTC B Ø1.5-D0.6 FTLU R FTLU R FT B M4-D1.3 Model L1 L2 FTLU R FTLU R FTLU R B-47

8 Model Through-beam type Model Through-beam type FTC Ø1.5-D0.5 FTP D1.0 / Plastic FTCS Ø2-D0.5 / SUS Ø1.0 15mm FTS M4-D1.0 / SUS Ø1.5 90m FTS M3-D0.5 / SUS Ø1.0 90mm FTS M4-D1.0 / SUS Ø1.5 45m FTS M3-D0.5 / SUS Ø1.0 35mm FT H M4-D1.0 / Heat-resistant 105 FTS M3-D0.5 / SUS Ø1.0 45mm FT H1 M4-D1.0 / Heat-resistant 150 FT M4-D1.0 GT H2 M4-D1.3 / Heat-resistant Max. 250 / Glass FTC Ø3-D1.0 FTR R M4-D1.0 Hood material: SUS303 7 M2.6X0.45 Ø8.1 Ø M4X0.7 Ø2.2 FTCSN Ø2.47-D0.5 / SUS Ø0.8 15mm / Side view B-48

9 Lens for long distance detection(sold separately) Model : FTL-M26 Applicable fiber cable and <Lens > <Mounting at cable> max. mounting distance - FT : 2500mm - FT H : 1500mm Mounting of lens Mount the lens on the 3mm projecting point of the front hood. Ambient temperature range of lens It should be used within -40 to 100.(not over 100.) Model cable: FDC-320-F Micro spot lens: FDC-2 Feature data Measuring method d l Protection tube for fiber cable (sold separately) Application (:mm) : Protect cable from impact or cutting Micro spot fiber cable and lens (sold separately) FDC-2 Focal distance L (mm) Beam spot characteristic Spot dia(mm) Insertion length l (mm) 15.0 Model Appearance and Dimension L FTH-305 Ø6 M3 0.5 depth4 Ø FTH-310 L FTH-405 M4 0.7 depth4 Ø7 Ø5.8 Ø6 Ø FTH-410 L FDH-605 M depth4 Ø9 Ø7.5 Ø7 Ø FDH-610 L Ø9 Ø5 500 FDC-320-F FDC-2 Accessory cutter (: mm) Ambient temperature range of lens It should be used within -40 to 100. (not over 100.) Emitter1-Ø0.5 Receiver4-Ø0.25 Ø3.7 Lens Ø2 10 (:mm) 2-Ø1 Applications: Cutting fiber cable, free cut type FC-3 7 Adapter Adapter : Adapter marked fiber cable should be used with adapter Ø1.3 Ø4 Lens Ø1.0 Ø M Depth: 4mm Ø Ø Ø Ø1.4 (: mm) Ø4 Additional 8mm is for tube coupling. The inside dia Ø1.0(Standard and black) The inside dia Ø1.3(Only applied to the receiver of FD-320-F1 and dark gray.) B-49