ODU MINI-SNAP Miniature Cylindrical Connectors with Push-Pull-Locking Series F

Transcription

1 Catalogue Nr.: --b-e ODU MINI-SNAP Miniature Cylindrical Connectors with Push-Pull-Locking Series F ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße, D-8 Mühldorf/Inn Phone: +9/ 86 / 6 6-, Fax: +9/ 86 / 66-9, zentral@odu.de,

2 Dieses PDF Dokument ist mit interaktiven Funktionen ausgestattet: Blau unterstrichene Texte führen zu den entsprechenden Seiten im Katalog bzw. zu den entsprechenden Internet-Seiten. The latest version of this catalogue is posted on our websites: More Push-Pull series see page 8 UL-File E86 RT66: MIL-Specification: see page 78 All shown connectors are according to DIN EN 698:9 connectors without breaking capacity (COC). All data and specifications subject to change without notice. All dimensions in mm. All pictures are illustrations.

3 Table of Contents ODU MINI-SNAP ODU MINI-SNAP Product Description... Applications...7 Important Issues At A Glance...8 ODU System Supplier...9 Turned contact... ODU MINI-SNAP Series F... -The FP Locking Concept... -Sizes... -Part Number Key (see also cover)... -Housings...6 -Details for the Part Number Key... -Coding...6 -Housing Materials/Surfaces...6 -Insulation Body Material...7 -Inserts Series F...8 -Size...8 -Size...9 -Size,... -Size... -Size... -Contact Type / Contact Surface-Contact Diameter... -Contact Termination Cross Section... -Collet System...6 -Right-Angled Print Contacts in the Receptacle...7 -Definition of the back nut...7 -Cable Bend Relief...8 -Drilling Patterns for PCB-contacts...9 Variations and Special Designs of the ODU MINI-SNAP... Accessories... Tools... Crimping Tools / Assembly Tools...6 Assembly Tools for Crimp Contacts (7 and 8)...7 Adjustment of the Crimp Tongs...8 Spanner Wrench...9 Nutdriver for Slotted Mounting Nut...9 Removal Tool...6 Assembly Instructions...6 Assembly Instructions...6 Cable Preparation...6 See next page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

4 ODU MINI-SNAP Table of Contents Technical Information...67 International Protection (IP) Classes (DIN EN 6 9)...68 Watertightness of the ODU MINI-SNAP...69 Operating Voltage acc. to SAE AS -method....7 Current Load Contacts...7 Termination Styles...7 Conversion Table AWG to Metric...7 Housing Materials / Surfaces...7 Electromagnetic Compatibility (EMC)...7 Autoclaving of ODU MINI-SNAP...76 Quality Management...77 Tests...78 Technical Terms & Definitions...79 Inquiry Form (Fax) Inside gatefold Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

5 Product Description General Product Information

6 ODU MINI-SNAP Product Description The ODU MINI-SNAP family of Miniature Cylindrical Connectors features Push-Pull-Locking Cylindrical Connectors are generally available with several locking mechanisms. The most frequently used are: Threaded-Locking Sleeve Bayonet-Locking Push-Pull-Locking Push-Pull-Connectors have a very simple locking mechanism: As the plug is pushed into the receptacle, locking fingers on the plug snap into the receptacle creating a reliable connection between plug and receptacle. Pulling on the cable or the rear of plug causes the locking fingers to grab harder and a separation of plug and receptacle is almost impossible. Pulling on the outer plug housing causes the locking fingers to retract and the plug and receptacle separate easily. The Advantages of Push-Pull-Connectors: Quick and easy mating and demating Quick and easy seperating Easy blind mating in difficult-to-reach places Less panel space required Definite and secure locking condition Less mating required Robotic mating and demating possible Easy cleaning of housing possible Important Applications for Push-Pull Connectors: Medical Electronics Test and Laboratory Measurement Instrumentation Data and Telecom Systems Audio and Video Applications Military and Aerospace Industrial Controls Nuclear Technology Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

7 Applications ODU MINI-SNAP Applications Medical Consumer electronics Test and Measurement Telecommunication Industrial and Automation ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

8 ODU MINI-SNAP Product Description Important Issues at a Glance: The series is certified acc. and VDE. Connector with metal shells available in sizes Outside diameter between 9. mm and 8 mm Number of contact positions: to 7 position, mixed insert arrangements Plugs and inline receptacles are offered with solder and crimp termination. Receptacles are available for solder, crimp, and PCB termination. Applications and Contact Material Insulation Body Material Contact Material PBT PEEK Ms General Application requirments ) (- C + C) Connectors which are autoclavable (+ C, see page 76) Termination Style Crimp Termination * Solder Termination Printed Circuit Board (PCB) Termination Environmental Protection Classification IP and IP 68 are available * = Crimp-Clip Contacts with.7 mm diameter are available. What we don t have yet, we can build for you! Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

9 Cable Assembly ODU MINI-SNAP Everything from one source ODU, the System Supplier Every connection also needs its cable. Make no compromises here when it comes to the quality of the complete connection system. ODU gives you the complete system solution from one source, with no intermediary suppliers. Cable assembly is a very complex subject. It requires equal measures of expertise in the areas of connectors, cables and assembly. ODU meets all these requirements in full. Benefits for the customer ODU handles the complete processing, from procuring the cable to procuring connectors from other companies and assembly up to individual extrusion or potting No one knows our products better than we do no one knows how our products have to be processed better than we do Close cooperation and experience with well-know cable manufacturers Assembly of all standard lines, as well as special lines such as hybrid cable Assembly of extruded cable crossovers % inspection systems can be used at the customer without testing Various potting options for a water-tight or vacuum-tight system UL Approval (File E666) for cable assembly Production in Cleanroom acc. EN ISO 6- possible Production acc. to Medical Certification ISO 8 : + AC : 7 possible State of-the-art production facilities in Mühldorf, Shanghai (China), Camarillo (USA) and Sibiu (Romania). ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 9

10 ODU MINI-SNAP Product Description Turned contact Turned contacts are available from the metal version ODU MINI-SNAP in the diameters. to. mm. The contacts are available with following terminations: Solder Crimp Print Standard Pin Contacts Solder Termination Crimp Termination Crimp Clip Termination Print Termination Mating cycles: > Material: Brass Treatment processing: At least.. µm Ni; at least..7 µm Au on the mating area For information regarding diameter, termination style and current load please see the Contact Configuration section. Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

11 ODU MINI-SNAP Series F - IP and IP 68 FP-Locking Concept Keying with Halfshells Series F

12 ODU MINI-SNAP Series F The Push-Pull Locking Principle: FP with Halfshells Locking Groove Conical Sleeve Locking Fingers Outer Housing Back Nut ODU MINI-SNAP connector in unmated condition. Receptacle Plug ODU MINI-SNAP connector in mated condition. Pulling on the cable or on the back nut causes the locking fingers to grip tighter into the groove inside the receptacle. A separation is virtually impossible. Pulling on the outer plug housing disengages the locking fingers from the receptacle groove and the connector separates easily. Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

13 Series F ODU MINI-SNAP ODU MINI-SNAP with FP-Locking Scheme in Cross Section Cable Collet Nut ODU MINI-SNAP Plug Shield Locking Ring Single Conductor EMI Ring Back Nut Half Shells Inner Housing Contacts Locking Finger Insulator Guide Ring Outer Housing Hex Nut Conical Sleeve Locking Groove Housing Press Ring Insulator ODU MINI-SNAP Receptacle Contacts ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

14 ODU MINI-SNAP Series F Available Housing Sizes (Scale : ) OD = Outside Diameter (Plug) S = Size OD: 9, 8 S:. Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

15 Series F ODU MINI-SNAP Part number key The Part Number Key F. Type A = Break-Apart-Plug Panel Mounted Plug G = Receptacle K = In-Line Receptacle S = Straight Plug W = Right-Angle Plug. Style - 9 and A X = Special. Size - and A A =,. Series F. Coding (Page (page 6) 6. Material/Surface - Housing (page6) 7. empty 8. Material - Insulator (Page (page 7) Contact Insert (page (Page 8 - ) e.g. 8-way = 8. Contact Type/Surface (page (Page ). Contact Diameter (Page (page ) M = mixed arrangement. +. Term. Cross Section (Page -). for special Contact 9. empty Collet System (page (Page 6) (page - ) Cable Bend Relief (page (Page 8) Example: G F C T 6 L F D Receptacle - Style - Size - Series F - Coding - Brass matt chromate Housing - PBT Insulator - 6pos. - Socket (solder).7 µm Au -Term. Cross Section AWG/ S F C P 6 MFD 7 E S Plug - Style - Size - Series F - Coding - Brass matt chromate Housing - PEEK Insulator - 6pos. - Pin (solder).7 µm Au - Term. Cross Section AWG/6 - Cable Diameter Blue Cable Bend Relief - Material Silicone ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

16 ODU MINI-SNAP Series F Part number key F S S S S Straight Plug - IP with Standard Back Nut - IP with Back Nut for Cable Bend Relief* - IP 68 watertight with Standard Back Nut - IP 68 watertight with Back Nut for Cable Bend Relief* (Suitable for all following receptacles and in-line receptacles)) contact configuration from page 8 S IP IP 68 S S S IP IP 68 Dimensions in mm S S Size L L D SW-A SW-B SW-B ~ 7 ~ ~ 6 ~. ~ 8 ~ 8 ~ ~ 8 ~ 6 ~ 8 6 Dimensions in mm S S Size L L D SW-A SW-B SW-B ~ ~ ~ 9 ~ 8. ~ ~ ~ ~ ~ 6 ~ * Cable Bend Reliefs (see page 8) Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

17 Series F ODU MINI-SNAP Part number key F W W Right-Angle Plug - IP with Standard Back Nut - IP with Back Nut for Cable Bend Relief* (Suitable for all following receptacles and in-line receptacles) W contact configuration from page 8 W * Dimensions in mm W W Size L L L C D SW-A SW-B SW-B SW-C ~ ~ ~ ~ 7 ~ 6. ~ 9. ~ 9 ~ 9 ~ ~ ~ ~ * Cable Bend Reliefs (see page 8) ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

18 ODU MINI-SNAP Series F Part number key F A A 6 Break-Apart-Plug (without latching) - IP 68 with Standard Back Nut - IP 68 with Back Nut for Cable Bend Relief* (Suitable for all following receptacles and in-line receptacles) A contact configuration from page 8 A 6 Dimensions in mm Size L L D SW-A SW-B ~ 6 ~ A 7 A 8 - IP with Standard Back Nut - IP with Back Nut for Cable Bend Relief* A 7 contact configuration from page 8 A 8 Dimensions in mm A7 A8 Size L L D SW-A SW-B SW-B ~ 6. ~ ~. ~ 8 Connector can be separated by pulling the cable. * Cable Bend Reliefs (see page 8) Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

19 Series F ODU MINI-SNAP Part number key F A A Panel mounted plug - IP with hex nut, non-latching, installation from front of panel (Suitable for all following receptacles and in-line receptacles) M Technical Data A A IP in mated condition Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 Dimensions in mm Size SW L L max. L C D SW-A SW-B M Cut-Out Ø * ) Ø ** ) Panel. 8. M 9 x, SW 8. / Ø 9,*) M x SW. / Ø.**) M x SW. / Ø.**) 7..,. 9 M6 x SW. / Ø 6.**) Created to build up a docking connection between instruments (E.g. a charging station) SW A D - IP 68 with hex nut, non latching, installation from front of panel M Technical Data A D IP 68 in mated condition Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 no crimp contacts possible Dimensions in mm Size SW L L max. L C D SW-A SW-B M Cut-Out.. 9 M 9 x. / Ø 9.*) M x SW. / Ø.**) M6 x SW. / Ø 6.**) Ø * ) Ø SW ** ) Panel Created to build up a docking connection between instruments (E.g. a charging station) ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 9

20 ODU MINI-SNAP Series F Part number key F K K K K In-Line Receptacle - IP with Standard Back Nut - IP with Back Nut for Cable Bend Relief* - IP 68 watertight with Standard Back Nut - IP 68 watertight with Back Nut for Cable Bend Relief* contact configuration from page 8 K IP IP 68 K K K IP IP 68 Dimensions in mm K K Size L D SW-A SW-B SW-B ~ ~ ~ 9 ~ Dimensions in mm K K Size L D SW-A SW-B SW-B ~ ~ 7 ~ 6 * Cable Bend Reliefs (see page 8) ODU MINI-SNAP In-line Receptacle connect to plug for cable-to-cable connection. Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

21 Series F ODU MINI-SNAP Part number key F ) L = Maximum Length incl. Contact Insert ) L =Length of Housing ) =min. wallthickness without using a distance ring G Receptacle Style ODU MINI-SNAP RECEPTACLE IP, installation from front of panel Technical Data IP Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 Dimensions in mm Size ) ) L L max. L M D SW-A SW-B C SW Cut-Out Ø * ) ** ) *** ) Panel ~ 9. 9x. 8.. SW 8. / Ø 9.* ) ~ 8 6. x. SW. / Ø.* ), ~ ~ 8. x 6 7 SW. / Ø.*** ) ~ 7 8. x 8. 7 SW. / Ø.** ) ~.. 8x 6. SW 6.6 / Ø 8.* ) Ø SW Ø SW G Style ODU MINI-SNAP WATERTIGHT RECEPTACLE IP 68*, installation from front of panel Technical Data Size Dimensions in mm ) L ) Lmax. ) Lmin. ) L M D SW-A SW-B C d IP 68 in reference to the end device and in unmated condition Contact configuration from Page 8 PCB-Layouts from Page 9 Distance ring for wall-thickness adjustment, see accessories page no crimp contacts possible ~ x.. Ø. ~ x 8 7 Ø., ~ 7 7. x 9 7, Ø. ~ x Ø 6. ~ x 6 Ø. Ø Panel Cut-Out G Style ODU MINI-SNAP WATERTIGHT RECEPTACLE IP 68*, installation from front of panel with low rear profile Dimensions in mm Technical Data IP 68 in reference to the end device and in unmated condition Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 no crimp contacts possible Size ) ) SW L Lmax. L M D SW-A SW-B SW-C C Cut-Out Ø Panel ~. 7. 9x.. 8. SW 8. / Ø 9. ~ 6. x 8 7. SW. / Ø., ~ 8.6 x SW. / Ø. ~ 6x 7 9. SW. / Ø 6. *Reference: Potted Receptacle please see page 69 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

22 ODU MINI-SNAP Series F Part number key F ) L = Maximum Length incl. Contact Insert ) L =Length of Housing G Receptacle Style ODU MINI-SNAP RECEPTACLE IP, CONTINUOUS THREAD, installation from rear or front of panel. Front extension adjustable Technical Data IP Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 Dimensions in mm Size ) ) L L max. L M D SW-A SW-B SW-C C SW Cut-Out Ø Panel ~ 8. 9x.. 8. SW 8. / Ø 9. ~ 8 6. x SW. / Ø., ~ 8. x SW. / Ø. ~ 7 8. x. 7 7 SW.6 / Ø. ~.. 8x 6. SW 6.6 / Ø 8. G 8 Receptacle Style 8 ODU MINI-SNAP WATERTIGHT RECEPTACLE IP 68*, with slotted nut, installation from rear of panel Technical Data IP 68 in reference to the end device and in unmated condition Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 nutdriver for slotted mounting nut, see page 9 no crimp contacts possible Dimensions in mm Size ) ) L L max. L M D C SW-A SW Cut-Out Ø *) **) Panel ~, 7 9x SW 8. / Ø 9. **) ~ 7. x 8 8 SW. / Ø. *), ~ 9. x 9 7 SW. / Ø. **) ~ 9 6x 8. SW. / Ø 6. *) ~ 6 6. x 6 8 SW 8. / Ø. *) Ø SW *Reference: Potted Receptacle please see page 69. Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

23 Series F ODU MINI-SNAP Part number key F ) L = Maximum Length incl. Contact Insert ) L =Length of Housing G B Receptacle Style B ODU-MINI-SNAP RECEPTACLE IP (similar style ), with grounding tab, installation from front of panel Technical Data Grounding tab IP Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 Dimensions in mm Ø * ) ** ) Panel Size ) L ) L max. L M D SW-A SW-B C SW Cut-Out ~ 9. 9x, 8.. SW 8. / Ø 9. *) ~ x. SW. / Ø. *) ~7 8. x 8. 7 SW. / Ø. **) Ø SW G D Style D ODU-MINI-SNAP RECEPTACLE IP 68*, with round nut, installation from rear of panel Technical Data IP 68 in reference to the end device and in unmated condition Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 no crimp contacts possible Size Ø Dimensions in mm *) **) Panel ) SW L ) Lmax. ) L M D SW-A SW-B C Cut-Out ~. 7 9x SW 8. / Ø 9. ** ) ~ 7 x SW. / Ø. * ). ~ 9. x SW. / Ø. ** ) ~ 6x. 9 8 SW. / Ø 6. * ) ~ 6 6. x SW 8. / Ø. * ) *Reference: Potted Receptacle please see page 69. Ø SW ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

24 ODU MINI-SNAP Series F Part number key F ) L = Maximum Length incl. Contact Insert ) L =Length of Housing G H Receptacle Style H ODU MINI-SNAP RECEPTACLE IP, installation from front of panel Technical Data IP Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 Size Dimensions in mm ) L Lmax. ) L M D SW-A SW-B SW-C C ~ 6 9x SW 8. / Ø 9. ~. 7. x SW. / Ø.. ~ 7 x SW. / Ø. ~ x SW.6 / Ø 6. Ø SW Panel Cut-Out G K Style K ODU-MINI-SNAP RECEPTACLE IP, installation from rear of panel. L L C L D Technical Data IP Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 SW-A M SW-B Ø Dimensions in mm Panel Size ) ) L L max. L M D SW-A SW-B C Cut-Out SW ~ 6. x 8 SW. / Ø. ~7 8. x 7 9 SW. / Ø. ~. 8x 7. 7 SW 7. / Ø 8. G Q Style Q ODU-MINI-SNAP RECEPTACLE IP, CONTINUOUS THREAD, (see Style, but special nuts) installation from rear or front of panel. Extension in front of panel is adjustable Technical Data IP Anti-rotation feature Contact configuration from Page 8 PCB-Layouts from Page 9 Nutdriver Page 9 Dimensions in mm Size ) ) SW L L max. L M D SW-A C Cut-Out ~ 7. 9x, 8 SW 8. / Ø 9. ~ 7 6. x SW. / Ø., ~ 7. x 8 SW. / Ø. Ø Panel Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

25 Details for the Part Number Key Cable-Ø Anti Rotation Pin EMI Ring Collet Nut Keying Housing Materials / Surfaces Inserts Collet System Cable Bend Reliefs

26 ODU MINI-SNAP Details for the Part number key Coding Part number key F Serie F Angle Receptacle Front View Size. = Standard = On request Housing Materials / Surfaces Part number key F C Standard Cu-alloy / matt chromate Special materials and surfaces on request. N Cu-alloy / nickel S Cu-alloy / black chromate Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

27 Details for the Part number key ODU MINI-SNAP Insulation Body Material Part number key F P PEEK T PBT available size. - Additional materials on request Turned Contacts Article Number PBT PEEK Solder Termination Crimp Termination PCB Termination = available Advice for insulation body selection regarding PCB termination: wave-solder: PBT or PEEK insulation body. All other methods: only PEEK insulation body. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

28 ODU MINI-SNAP Details for the Part number key Size Part number key F Size ) Positions Positions Contact Ø mm Nominal Signal Contact Current Load in A (Derating Factor see page 7) Contact to contact in mm Clearance and creepage distance Contact to housing in mm Test Voltage acc. SAE AS:998 method. (kveff) Nominal Voltage acc. SAE AS:998 method. (kvrms) Termination Solder Crimp (Tools for assembling see page 6) Print (PCB Layout see page 9) View on termination side Pin part Socket,9,,,, Standard Contact Configuration,9,6,,,,7 7,8,9,,,7 7,6,8,, 7,,7,8,, ,,,7,6, ) Inserts in size are only available in PEEK ) Nominal Voltage acc. SAE AS :998 method. meet the MIL-STD, method, Test acc. IEC 6 test a. Method of calculation, utilization warning and Proposals see page 7. Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

29 Details for the Part number key ODU MINI-SNAP Size Part number key F Size ) Positions Positions Contact Ø mm Nominal Signal Contact Current Load in A (Derating Factor see page 7) Contact to contact in mm Clearance and creepage distance Contact to housing in mm Test Voltage acc. SAE AS:998 method. (kveff) Nominal Voltage acc. SAE AS:998 method. (kvrms) ) Termination Solder Crimp (Tools for assembling see page 6) Print (PCB Layout see page 9) View on termination side Pin part Socket,,,,6,,,,,, Standard Contact Configuration,9,,,,,9,8,,, 6,7 7,8,,, 6 6 7,7 7,8,,, ,,,9,, ) Inserts in size are only available in PEEK ) Nominal Voltage acc. SAE AS :998 method. meet the MIL-STD, method, Test acc. IEC 6 test a. Method of calculation, utilization warning and Proposals see page 7. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 9

30 ODU MINI-SNAP Details for the Part number key Size, Part number key F Size ) Positions Positions Contact Ø mm Nominal Signal Contact Current Load in A (Derating Factor see page 7) Contact to contact in mm Clearance and creepage distance Contact to housing in mm Test Voltage acc. SAE AS:998 method. (kveff) Nominal Voltage acc. SAE AS:998 method. (kvrms) ) Termination Solder Crimp (Tools for assembling see page 6) Print (PCB Layout see page 9) View on termination side Pin part Socket Standard Contact Configuration,,7 7,,8,6,,,7 7,6,9,,, 9,,6,8,, ) Inserts in size. are only available in PEEK ) Nominal Voltage acc. SAE AS :998 method. meet the MIL-STD, method, Test acc. IEC 6 test a. Method of calculation, utilization warning and Proposals see page 7. Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

31 Details for the Part number key ODU MINI-SNAP Size Part number key F Size ) Positions Positions Contact Ø mm Nominal Signal Contact Current Load in A (Derating Factor see page 7) Contact to contact in mm Clearance and creepage distance Contact to housing in mm Test Voltage acc. SAE AS:998 method. (kveff) Nominal Voltage acc. SAE AS:998 method. (kvrms) ) Termination Solder Crimp (Tools for assembling see page 6) Print (PCB Layout see page ) View on termination side Pin part Socket,6 7,,8,,7,6 7,6,7,,7,,,,, Standard Contact Configuration 6 8 9,9,,,9,,,9,8,,,8,,8,6,6,,,,, ,9,8,,, ,7 7,6,7,, ,7 7,7,8,, ) Inserts in size are only available in PEEK ) Nominal Voltage acc. SAE AS :998 method. meet the MIL-STD, method, Test acc. IEC 6 test a. Method of calculation, utilization warning and Proposals see page 7. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

32 ODU MINI-SNAP Details for the Part number key Size Part number key F Size ) Positions Positions Contact Ø mm Nominal Signal Contact Current Load in A (Derating Factor see page 7) Contact to contact in mm Clearance and creepage distance Contact to housing in mm Test Voltage acc. SAE AS:998 method. (kveff) Nominal Voltage acc. SAE AS:998 method. (kvrms) ) Termination Solder Crimp (Tools for assembling see page 6) Print (PCB Layout see page ) View on termination side Pin part Socket,,,,6, Standard Contact Configuration,9,9, 8,9,9,,, 7,7,7 7 7,7,7,,,,,,,, ) Inserts in size are only available in PEEK ) Nominal Voltage acc. SAE AS :998 method. meet the MIL-STD, method, Test acc. IEC 6 test a. Method of calculation, utilization warning and Proposals see page 7. Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

33 Details for the Part number key ODU MINI-SNAP Contact Type / Contact Surface - Contact Diameter Part number key F Type Surface Solder Socket Pin L -.7 µm Au (min.) L -.7 µm Au (min.) L M Crimp Socket Pin C-.7 µm Au (min.) C -.7 µm Au (min.) N P Socket P -.7 µm Au (min.) Q Print Pin P -.7 µm Au (min.) R ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

34 ODU MINI-SNAP Details for the Part number key Contact Termination Cross Sections Part number key F Crimp Contact Size Positions Contact Ø AWG mm² F F J J C G G H F F C G J J G H P L, F F C G F F C G J J G H. 8.. P L F F C G J J G H. 8.. P L Tools for crimping and adjustments see from page. Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

35 Details for the Part number key ODU MINI-SNAP Contact Termination Cross Sections Part number key F Solder Contact Contact Ø Term. Ø Term. Cross AWG mm,, 8,8 C C,7,6 6, F D,7,8,8 F G,9,8,8 J G,,, P H PCB Contact Contact Ø Term. Ø,, C,7, F,9,7 J,,7 P Please see the PCB-layouts on page 9-. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

36 ODU MINI-SNAP Details for the Part number key Cable-Ø Collet System Part number key EMI Ring Anti Rotation Pin F Cable diameter in mm Size, Collet Nut >, -, >, -, Insert: for all Plugs and In-Line receptacles. >, -, >, -, Application: Collet nut for strain relief, EMI ring for conductive path between shield and housing. >, -, >, -, >, -, References: This diameters are not available for applications in IP 68 This application is not available for applications with cable bend relief. >, -, >, -, >, - 6, > 6, - 6, 6 6 It s possible that the collet nut cannot be covered completely over the cable > 6, - 7, > 7, - 7, 7 7 > 7, - 8, 8 > 8, - 8, 8 > 8, - 9, 9 > 9, - 9, > 9, -, 9 >, -, >, -, without collet system Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

37 Details for the Part number key ODU MINI-SNAP Right-Angled Print Contacs in the Receptacle Part number key F Q Right-Angled Print Contact A Pin contacts on request PCB-Layout see Page 9 - Definition of the back nut Straight-angled-break apart plugs, inline receptacles, receptacles style 6 and 7 Part number key 6 7 F Standard back nut Back nut for silicon cable bend reliefs S Cable bend reliefs on page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

38 ODU MINI-SNAP Details for the Part number key Cable Bend Reliefs Silicone Temperature range Silicone - ºC up to + ºC short term up to + ºC autoclavable Part number key F S Color of the Cable Bend Relief Color / RAL-number (similar) red RAL white RAL 9 yellow RAL 6 green RAL 69 blue RAL grey RAL 7 black RAL 9 without cable bend relief A B C D E F G Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

39 PCB-Layout ODU MINI-SNAP Drilling Patterns for PCB-contacts Drilling Patterns for PCB-contacts straight right-angled straight right-angled Size pos. Size Drill:.8 mm. Drill:.7 mm. pos. Drill:.8 mm.8 Drill:.9 mm. pos. Drill:.8 mm. Drill:.7 mm..6 positions Drill:.8 mm Drill:.9 mm... positions Drill:.6 mm x9.6 Drill:.6 mm.8. positions Drill:.8 mm. x 9 Drill:.7 mm.. Size. 7 positions positions Drill:.6 mm x 7 Drill:.6 mm 6 x straight.8 Drill:.6 mm.6. Drill:.6 mm right-angled positions 6 positions 7 positions Drill:.8 mm. x 7 Drill:.6 mm.7 6 x 6 Drill:.6 mm.7 6 x Drill:.7 mm. Drill:.7 mm.6.6 Drill:.7 mm pos. Drill:.6 mm 8 x Drill:.7 mm positions Drill:.6 mm x 9 x Drill:.7 mm positions Drill:.6 mm x 8 9 x Drill:.7 mm All declarations are legal for socket inserts. Pin inserts on request. 9 positions Drill:.6 mm 6 x 6.8. x Drill:.6 mm ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 9

40 ODU MINI-SNAP PCB-Layout Drilling Patterns for PCB-contacts Drilling Patterns for PCB-contacts straight right-angled straight right-angled Size Size positions positions pos. Drill:. mm. Drill:. mm. Drill:.8 mm. Drill:.8 mm 6 9 x on request on request Drill:.9 mm.7.7 Drill:.7 mm.. pos. positions Drill:.8 mm Drill:.8 mm 9 x 8.. x Drill:.8 mm x 6 on request on request 9 positions 6 positions positions 9 positions 8 positions 6 positions. Drill:.8 mm Drill:.8 mm 6. 6 Drill:.8 mm x6 6 8 x Drill:.6 mm x7 8 9 x6 8 x7. x Drill:.6 mm x x on request on request Drill:.7 mm.7 9 Drill:.7 mm Drill:.7 mm positions positions 7 positions 8.. x Drill:.6 mm 8.8. Drill:.6 mm x x6 6 x x Drill:.7 mm on request All declarations are legal for socket inserts. Pin inserts on request. 9 x Drill:.8 mm Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

41 Special Solutions Special Solutions

42 ODU MINI-SNAP Special solutions Customer specific solutions for ODU MINI-SNAP ODU as a specialist for customized solutions have all main competences under one roof. Development, an own tool shop, stamping, molding, surface plating, manufacturing of complete assembly machines etc. etc.. With all these possibilities we are able to offer Custom tailored solutions for our customers. When do we actively pursue customer specific solutions? First we have to study the customers requirements. In order to use existing development resources efficiently, it is necessary to concentrat on those ideas that are very likely to produce sustained earnings. And so we work very closely with you to develop exactly the product that optimally fulfills the requirements. And naturally the feasibility is analyzed in the starting phase of every development in order to make it possible to estimate the costs for a new development. Here are a few examples how a special solution may look like: Custom Specific Inserts Special insulators and special assemblings for High-Voltage applications Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

43 Special solutions ODU MINI-SNAP Custom specific PCB assembling Special overmouldings and insulation sleeves Also different locking mechanism are possible (picture: Bajonett and Threaded Locking) ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

44 ODU MINI-SNAP For your notes Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

45 Accessories Accessories/Tools

46 ODU MINI-SNAP Accessories Color Coding Ring Ø A Ø B Mounting Example: Receptacle Panel Mating Direction Hex Nut Color Coding Ring Order Example Size Color red Housing Ø M9 Size, * = In... please indicate color code Size Part Number with Colour Ø A Ø B 7 9 9, 9, 7 9 6,, 7 9 7,, 7 9,, 7 9,, 7 9,, 7 9 6, 6, 7 9 8, 8, 7 9 8,, Color Part Number with color Color RAL-No. (similar) red white 9 yellow 6 green 69 6 blue 7 grey 7 8 black 9 9 orange violet brown 86 light green 68 6 light blue Because of different raw materials the colors may sligthly differ from RAL numbers. Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

47 A Accessories ODU MINI-SNAP Protective Covers for Receptacles (IP ) C ØB * = With. please, register desired lanyard material = Polyamide lanyard with loop = Stainless steel lanyard with loop = Polyamide lanyard solder lug = Stainless steel lanyard solder lug Surface: Matt chromate Size Part Number* Dimensions in mm A B C D D Ø,, ,,,,8 6, Protective Covers for Receptacles (IP 68) A C ØB * = With. please, register desired lanyard material = Polyamide lanyard with loop = Stainless steel lanyard with loop = Polyamide lanyard solder lug = Stainless steel lanyard solder lug Surface: Matt chromate Size Part Number* Dimensions in mm A B C D D Ø,, ,,,, 7, ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

48 A ODU MINI-SNAP Accessories Protective Covers for Plugs (IP ) C A ØB * = With. please, register desired lanyard material = Polyamide lanyard with loop = Stainless steel lanyard with loop = Polyamide lanyard solder lug = Stainless steel lanyard solder lug Surface: Matt chromate Size Part Number* Dimensions in mm A B C D D Ø,, , Protective Covers for Plugs (IP 68) C * = With. please, register desired lanyard material = Polyamide lanyard with loop = Stainless steel lanyard with loop = Polyamide lanyard solder lug = Stainless steel lanyard solder lug Surface: Matt chromate Size Part Number* Dimensions in mm A B C D D Ø, ØB Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

49 Accessories ODU MINI-SNAP Silcone-Cable Bend Relief L * = In... please indicate color code Size Part Number* Dim. L Cable O.D. min max > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >.. Color Code Color red white yellow green blue grey black Temperature range RAL-Nr. (similar) Because of different raw materials the colors may sligthly differ from RAL numbers. Silicone - ºC up to + ºC Short-term up to + ºC autoclavable ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 9

50 ODU MINI-SNAP Accessories Locking Washers Mounting example: Receptacle Panel Mating Direction Hex Nut Locking Washer *) Measurement under preasure Nickel-plated surface Size Part number M9 M M M M6 M8 M Dimensions in mm A C L* Solder Lugs for Series L and B Mounting example: Gehäusewand Panel ØE Geräteteil Receptacle D ØA ØB C F Sechskantmutter Hex Nut Lötfahne Solder Lug Silver-plated surface Thread Part Number* Dimensions in mm. A B C D E F M M M M M M M Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

51 Accessories ODU MINI-SNAP Distance Ring for Wall Thickness Adjustment for style (see page ) Mounting example: Panel T L Receptacle Ø Da Ø Di Mating Direction Material: brass Surface: nickel Hex Nut Distance Ring Part number Size Da Di L T ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

52 ODU MINI-SNAP Accessories Backnut for Silicone-Cable Bend Relief A Cable Bend Relief SW ØB * = In.. please indicate surface finish: = Cu-alloy / matt chromate = Cu-alloy / black chromate = Cu-alloy / nickel Size Part number Dimensions in mm A ØB SW 8,,,, 8,9,,9 6,9 7 Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

53 For your notes ODU MINI-SNAP ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page

54 ODU MINI-SNAP For your notes Page ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

55 Tools

56 ODU MINI-SNAP Tools Crimping Tongs and Assembling Tools for Turned Contacts 8-point-crimptong Order-Nr.: for crimp contacts:.7 mm and.9 mm. cross section:.8 mm up to. mm You can find all informations abaut adjustment and using of this tools on page 7 8-point-crimptong Order-Nr.: for crimp contacts:. mm and.6 mm. for cross section:.8 mm up to. mm You can find all informations abaut adjustment and using of this tools on page 7 Pneumatic crimping tool Order-Nr.: 8... For all MINI-SNAP contacts applicable cross section:.8 mm up to. mm Assembly Jig for the assembling of our Crimp Contacts into the insulation body (see page 6) Size Part number Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

57 Tools ODU MINI-SNAP Crimping and Assembly Tools for Crimp Contacts (7 and 8) Size Positions Contact diameter AWG mm cross sections Crimptool Identification groove Positioner socket Positioner pin Removal tool CC ,9,.7 6,8, 7.7 8,9,.7 6,8,..7 8,9, ,8, ,, ,, ,9, ,8,.9, , CC ,8, ,8, CC.7.. Order example for the tongs type 7 and 8: Assumed Connector: SFC-T6PJH-7 In this size connector is a 6-way Pin Insert used. The contact diameter is.9 mm. The cable cross section is AWG / Therefore you have to order following tools: Crimp Tong 7 (Adjustment 7) Positionier for Pin Contacts Insertion tool Assembly Jig (see page 6) You can find all informations about adjustment and using of this tools on the page 9 et seq. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

58 ODU MINI-SNAP Tools Adjustment of the Crimp Tongs and (see page 6) Required Tools: Positionier (Typ 7) Crimp Tong (Typ 7). Fasten the Positionier on the Crimp Tong Please fasten the Positionier under consideration of the guiding into the tong 7: Therby push the positionier down and turn it right at the same time. 8: You don t have to do this with this tong. 7: To fix the positionier in this position, you have to use the attached safety pin. 8: Here you have to fix the positionier with some attached allen screw and the suitable spanner.. Adjust of the Crimp Tong for the cable cross section Please turn the adjustment wheel onto the right position. If the adjustment is done, so please fix the wheel with the attached safety pin. Now the tong is ready adjusted. You can start with the crimp process Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

59 Tools ODU MINI-SNAP Spanner Wrench L B b SW t = Dicke Order No. SW t B L b , 8, ,, 8, , , , , , , ,, ,, ,, 98 6, ,, 98 6, , , , , , Nutdriver for Slotted Mounting Nut suitable for style 8, C, Q Ø Nutdriver Thread 7 98 M 9x, 7 98 M x, 7 98 M x 7 98 M x 7 98 M x 7 98 M 6x 7 98 M 8x 7 98 M x ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 9

60 ODU MINI-SNAP For your notes Removal tool for Crimp-Clip-Contacts Part-Number Contact Ø 87 7CC. mm 87 7CC 7.7 mm 87 7CC 9.9 mm 87 7CC. mm 87 7CC 6.6 mm Crimp-Clip-Contact Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

61 Assembly Instructions

62 ODU MINI-SNAP Assembly Instruction Assembly Instruction For unsealed connectors (IP ) Housing Half shells Crimp insert Back nut Coding Solder insert Collet EMI Ring. Slide Back nut, Collet, and EMI-Ring over the cable. Crimp termination Detail information see page 6 et seq. Solder termination Part number see page 7. Strip cable and wire.. Fit wire into the contact barrel and crimp.. Strip cable and wire.. Pre-tinning of strands recommended. Solder iron Part number see page 6-7. insert contacts into insulator, use the insertion tool to push them in.. Solder each wire to the corresponding contact.. Bend cable shield outwards. Half shells 6. Slide the EMI-ring against the sleeve and clamp the shield against it. Internal guides 7. Now you can put the coding and the assembled cable into the plug housing. Coding A 8. Screw back nut on the plug and fasten cable in the housing. Hold against with flat spanner at flat A* (Torque see page 6). Now the plug ist assembled. * ODU-Spanner-Wrench: see page 9 Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

63 Assembly Instruction ODU MINI-SNAP Assembly Instruction For sealed connectors (IP 68) Half shells Housing Crimp insert Back nut Coding Solder insert EMI Ring Seal Ring Collet. Slide Back nut, Collet, Seal Ring and EMI-Ring over the cable. Crimp termination Detail information see page 6 et seq. Solder termination Part number see page 7. Strip cable and wire.. Fit wire into the contact barrel and crimp.. Strip cable and wire.. Pre-tinning of strands recommended. Solder iron Part number see page 6-7. insert contacts into insulator, use the insertion tool to push them in.. Solder each wire to the corresponding contact.. Bend cable shield outwards. Half shells 6. Slide the EMI-ring against the sleeve and clamp the shield against it. Internal guides Coding A 7. Now you can put the coding and the assembled cable into the plug housing. 8. Screw back nut on the plug and fasten cable in the housing. Hold against with flat spanner at flat A* (Torque see page 6). Now the plug ist assembled. * ODU-Spanner-Wrench: see page 9 Watertight connectors require a grommet seal designed for the intended cable. We require either the exact specification or a sample of the cable. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 6

64 ODU MINI-SNAP Assembly Instruction Assembly Instruction for unsealed right-angled plugs (IP ) Half shell Sack srew Housing Coding Right angled part Solder insert EMI-ring Cable collet Back nut. Slide back nut, collet nut, EMI-ring and right-angled-part over the cable. 6. Slide collet nut and EMI-ring against the right-angled-part and clamp shield between EMI-ring and right-angled-part. Install back nut.. Strip cable and wire.. Pre-tinning of strands recommended. 7. Now you can put the coding and the assembled cable into the plug housing.. Solder each wire to the corresponding contact (Crimp version see straight connector on page 6).. Pull cable back, bend cable shield outwards, place half shells over insulator. A 8. Mount sack screw on the plug and fasten cable in the housing. Hold against with flat spanner at flat A* (Torque see page 6). Now the plug is assembled. * ODU-Spanner-Wrench: see page 9 Page 6 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

65 Assembly Instruction ODU MINI-SNAP Torque for back-nuts Torque for styles - Straight plug S; S; S; S - Right-angled-plug W; W - Break-apart-plug A; A6; A7; A8 - In-line-receptacle K; K; K; K - Receptacle G6; G7 Style, Torque,6 Nm, Nm, Nm, Nm, Nm Nm = 8,8 inch-pounds Cable preparation: The following table provides recommended guidelines for cable preparation: Single Conductor Einzelader A S Schirm Shield Insulation Isolierung A = Stripping length single conductor L = Stripping length cable jacket S = Stripping length braided shield L Kabel Cable Size Contact Solder Termination Crimp Termination Ø L A S L A S Size Size Size Size Size All dimensions in mm Tolerance: + % Exceptions are noted on special instructions. Right-angle plugs have special instructions. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 6

66 ODU MINI-SNAP For your notes Page 66 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

67 Technical Information Frequency in GHz,,,, - - Attenuation in db INDEX: Page International Protection (IP) Classes (DIN EN 6 9) Watertightness of the ODU MINI-SNAP Operating Voltage acc. to SAE AS -method... 7 Current Load - Turned Contacts... 7 Termination Styles... 7 Conversion Table AWG to Metric... 7 Housing Materials / Surfaces... 7 Electromagnetic Compatibility (EMC)... 7 Autoclaving of ODU MINI-SNAP Quality Management Tests acc. to MIL Technical Terms & Definitions Technical Information

68 ODU MINI-SNAP Technical Information International Protection (IP) Classes DIN EN 6 9 (respectively IEC 9 / VDE 7 T) The housing and the locking system of the ODU MINI-SNAP protect the contacts against outside mechanical influence, such as impact shocks, impurities, dust, unintended contact and penetration of moisture, water or other liquids (coolants, oils, etc.). Protection classification is indicated with the letters IP and two numbers. IP: International Protection All IP 68 submersible ODU MINI-SNAP Connectors are rated to m water depth (. bar) for hours in accordance with DIN EN 69. A watertight plug requires a cable grommet in the collet. The grommet has to fit tightly over the cable. The cable jacket must be smooth, cylindrical and free of grooves. The plug should be potted for watertightness in unmated condition. (Higher requirements for Watertightness on request) Code letters (International Protection) First Index Figure (Foreign bodies protection) Second Index Figure (Water protection) Index Degree of protection Index Degree of protection No protection against accidental contact, no protection against intrusion of solid foreign bodies No protection against water Protection against contact with any large area by hand and against large solid foreign bodies with Ø > mm Protection against contact with the fingers, protection against large solid foreign bodies with Ø > mm Protection against vertical water drips Protection against water drips (up to a angle) Protection against tools, wires or similar objects with Ø >. mm. Protection, against small foreign solid bodies with Ø >, mm As however Ø > mm Protection against diagonal water drips (up to a 6 angle) Protection against splashed water from all directions Full protection against contact. Protection against interior detrimental dust deposition. Protection against water spray from all directions Total protection against contact. Protection against intrusion of dust Protection against temporary flooding Protection against temporary immersion Protection against water pressure In accordance with DIN VDE 7, DIN EN 6 9, IEC 9 Source: ZVEI = German Association of the Electrotechnical and Electronic Industry e.v. Page 68 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

69 Technical Information ODU MINI-SNAP Watertightness of the ODU MINI-SNAP I) In-line receptacle Cable termination area Plug Sealing Part ➀ O-ring ➁ Grommet * ➂ O-ring ➃ Potting Contacts II) Receptacle Plug III) Cable - termination area Receptacle Plug Protection against Water through following seals: * mated unmated I Cable Cable termination area Yes ➀ + ➁ No II Device Cable termination area Yes ➀ + ➂ + ➁ No III Device Cable termination area Yes ➀ + ➂ + ➁ Yes ➂ + ➃ * Contacts: in mated condition the contacts are protected (in cases I, II, III). In unmated condition the contacts can be protected using a protective cover (see page 7-8). The cover must be removed before mating the plug with the receptacle. * The elastic grommet acts as the cable seal. It requires exact knowledge of the cable dimension. Important factors: Diameter tolerance, roundness, cable design and cable jacket hardness. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 69

70 ODU MINI-SNAP Technical Information Operating voltage acc. to SAE AS -method. The values acc. to SAE AS -method. comply with MIL-Std. method. The chart values results are acc. to IEC 6-. The inserts have been tested in mated condition and the test voltage was applied to the pin insert. 7% of the measured break-down voltage is the basic for the further calculation. / of this value is the corresponding operating voltage. All tests were performed at standard environment conditions (room temperature) and can be applied up to an altitude of m. For any deviations one has to consider the reduction factor acc. to the relevant standards. Test voltage: Break-down voltage x.7 Operating voltage: Break-down voltage x.7 x. Caution: Electrical appliances: for various applications the safety requirements regarding the operating voltage is even more severe! The relevant datas in such cases for the operating voltage are the creepage and clearance distances. For any advise how to chose the proper connector please consult us and indicate the safty standard which your product has to meet. Page 7 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

71 Technical Information ODU MINI-SNAP Current Load - Contacts Nominal Single Contact Current Load for pin / slotted socket (Nominal Diameter. mm -.6 mm) C 9 Ø, mm Ø,7 mm Ø,9 mm Ø, mm Ø,6 mm Measured Temperature in C A Load Current in Ampere Upper Maximum Temperature for Standard Contacts: + C Test contact was terminated to largest possible conductor. Connectors or cables with more than one contact or conductor generate a higher heat than a single contact. Therefore, a Derating Factor must be applied. For connectors the Derating Factor is applied according to DIN IEC 6- / VDE 76-. The Derating Factor is used starting with loaded wires. Derating Factor: Number of loaded wires Derating Factor 7 9,7,6,,,, ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

72 ODU MINI-SNAP Technical Information Termination Styles Contact blocks (insulation bodies with contacts) are interchangeable between receptacle and plug. As a rule the socket contact blocks are mounted in the part under power. ODU offers the following contact termination styles: Solder Crimp PCB Termination Styles for Turned Contacts Solder Termination: The contacts come mounted by the factory. The insulation body and the pre-assembled contacts are called a contact block. Crimp Termination A single contact is crimped to a single conductor. Subsequently, the crimped contact is pushed into the insulation body. Crimp contacts and insulation bodies are shipped separately. Crimping creates a reliable, corrosion-free and durable connection between the contact and the conductor. Crimping causes the crimp barrel of the contact and the conductor material to cold flow. It creates a gas-tight connection between contact and conductor. The ODU MINI-SNAP generally requires the industry-standard 8-point crimp tool. Printed Circuit Board (PCB) Termination: PCB pins are used only for receptacles which are mounted directly to the PCB. The contacts are permanently installed in the insulation body. Page 7 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

73 Technical Information ODU MINI-SNAP Conversion / AWG AWG = American Wire Gauge The AWG system describes the cross section of a wire using a gauge number for every 6 % increase in conductor cross section. With larger wire diameters, the AWG gauge numbers decrease; as the wire sizes increase, the AWG gauge numbers decrease. Most wires are made with stranded conductors. Compared to solid conductors stranded wires offer higher durability, higher flexibility and better performance under bending and vibration. Stranded wires are made from wires with smaller gauge sizes (higher AWG gauge number). The AWG gauge number of the stranded wire is equal to that of a solid conductor of the same size wire. The cross section of the stranded conductor is the sum of cross sections of the single conductors. For example, a AWG- stranded wire of 7 AWG-8 conductors has a cross section of.6 mm ; an AWG- stranded wire with 9 AWG- conductors has a cross section of.66 mm. AWG Conversion Table AWG / mm Circular Conductor Diameter in mm mm (),,9,7 (7/6),9,7, (),88,, (9/),89,,8 (7/8),88,8,97 (),6,6,8 (9/7),67,7,9 (7/),67,7,87 6 (),8,9, 6 (9/9),,, 8 (),,,8 8 (9/),8,,96 (),,8, (7/8),66,9,6 (9/),8,98,6 (),,6, (7/),88,7, (9/),7,78,8 (),97,,96 (7/),,8,7 (9/6),,6, 6 (),7,, 6 (7/),89,8, 6 (9/8),9,87, 8 (),6,,8 8 (7/6),,8,89 8 (9/),,8,9 (),98,,6 (7/8),,9, (9/),,,7 (),8,, (7/),9,, (9/),,, (),6,6, (7/),8,,66 6 (),,7,7 6 (7/),6,6,6 8 (),,,78 (),,8, (),8,7,8 (),,, (Font: Gore & Associates, Pleinfeld) ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

74 ODU MINI-SNAP Technical Information Housing Materials and Surface Finish MINI-SNAP housings are made from brass and are nickel-plated with a matt-chromate surface finish (sand-blasted). Nickel-plated or black chromate-finished housings are available on special request. Inside metal components are made from nickel-plated brass. Material Surface Component Parts Designation Thickness of the film Housing + µm Cu Back Nut Cu-alloy + -6 µm Ni Slotted Nut +.- µm matt chromate Collet EMI-Ring Half-Shells Cu-alloy Ni matt: -9 µm Locking Washer Nut Retainer Ring Pin (solder or PCB) Socket (solder or PCB) +. µm Ni Pin (crimp) Cu-alloy +.7 µm Au Socket (crimp) Insulation Body Material ( recognized) Norm Unit PBT PTFE ) PEEK Dialectric Strength DIN ASTM KV / mm 7 > 9 8 D-9 Operating Temperature C - / + - / +6 - / + Flammability rating UL V- V- V- Creeping distance acc. to CTI IEC (V) ) PTFE (Teflon) is only used for Coax- and Triax Connectors Page 7 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

75 Technical Information ODU MINI-SNAP Electromagnetic Compatibility (EMC) When discussing electromagnetic compatibility (EMC) one should not only consider the device or the circuit, but also include the network and the entire data communication link. This involves all connecting elements such as conductors and connectors. Electromagnetic interference from the outside into the connector can lead to system malfunctioning. The best way to prevent this is by providing a high-quality shield between the cable and the connector. In order to provide reliable EMC data to our customers we engaged the services of a certified test laboratory to investigate the EMC characteristics of the ODU MINI-SNAP. They tested for us Size,,, and MINI-SNAP connectors. Measurements were conducted using the inductive wire or parallel wire method in accordance with test procedure VG In this set-up, the mated connector is connected on one end to a network analyzer and terminated on the other end with a suitable impedance. The inductive wire is then mounted in close proximity along the mated connector pair. The induction wire is a ribbon cable which permits to vary the level of induction by using more or less of the ribbon conductors. Next, a signal with a frequency range of khz to GHz is connected to the ribbon cable. The network analyzer is used to measure the amount of signal induced into the connector circuit. The result is shown as the shielding attenuation A T in db. It is essential that all leads to the connector are shielded so that no signal can be induced into the circuit at any other place except the connector. The various attenuation values are plotted on a logarithmic scale as attenuation in db vs. frequency. An attenuation of better than - db is generally required for reliable connector and system operation. It can be shown that our connectors will meet this requirement in all applications. The following diagram is valid for all series and standard sizes. Frequency in GHz,,,, - - Attenuation in db ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 7

76 ODU MINI-SNAP Technical Information Autoclaving of ODU MINI-SNAP Connectors If required ODU can deliver MINI-SNAP connectors for the following sterilization process: Steam-sterilization with pre-vacuum or gravitation-process. Connectors were tested with autoklave equipment with reference to DIN EN 6 at C and cycles. Sterilization Curve: pressure in mbar abs. time. Pre-vacuum. Pressure increase. Pressure increase. Pre-vacuum. Pressure increase Temperature increase in transition Influence min. at C min. at C Pressure decrease After-vacuum Drying time Ventilation Ventilation Increase of pressure Sterilization Sterilization Curve Drying For other sterilization-processes please contact our technical support team. Page 76 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

77 Technical Information ODU MINI-SNAP Quality Management at ODU ODU has had a powerful quality management system in place for years. ODU has been success fully certified to ISO 9 since 99. In addition, the automotive sector of the company group is certified to ISO/TS 699. The certification process was carried out by the internationally active BVQI (Bureau Veritas Quality International) company. ODU is also certified according the medical norm ISO 8 : + AC : 7. Additional to this ODU ist approved to different certifications: VDE, UL, UL wiring harness, SCA, VG and MIL. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 77

78 ODU MINI-SNAP Technical Information In the scope of quality approval the sizes and have been submitted to environmental and mechanical tests acc. to MIL. All tests have been passed. Tests carried out: Definition Nach Norm High Temperature MIL-STD 8 F / PV Low Temperature MIL-STD 8 F / PV Temperature Shock MIL-STD 8 F / PV Humidity MIL-STD 8 F / PV 7 Salt Fog MIL-STD 8 F / PV 9 and MIL-STD A / Methode. Shock MIL-STD 8 F / PV 6 Vibration MIL-STD A / Methode. / IV Water Thigtness IP 68 IEC 69 Page 78 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

79 Technical Information ODU MINI-SNAP Technical Terms and Definitions Air Gap = Shortest distance between two conductive elements through the air. Autoclavability (See page 76) AWG (See page 7) Creepage Distance = The distance measured across the surface of a dielectric between two contacts or a contact and a metal part. The longer the distance, the lesser the risk of damage or tracking. Minimum creepage distances are specified according to the operating voltage and the applicable isolation group. Crimp Area = The part of a crimp barrel at which the crimp connection is achieved by pressure deformation or by reshaping the barrel around the conductor. Crimp Barrel A hollow part of a contact which accepts one or more conductors and which may be crimped through the application of a crimping tool. Crimp Connection = The permanent attachment of a contact to a conductor by pressure deformation or by reshaping the crimp barrel around the conductor so that a good electrical and mechanical connection is established. (See page 7) Connector = A component which terminates conductors for the purpose of providing connection and disconnection to a suitable mating component. Depending on the fastening to a cabinet, panel, rack etc. or a cable, they are classification. Delivery Delivery of the connectors usually as components (that means not assembled). Exception: Solder contacts are factory-installed in the insulation body. Fixed Connector = A connector for attachment to a rigid surface (panel). Free Connector = A connector for attachment to the free end of a wire or cable. Also called free hanging connector or inline receptacle. Insertion Or Withdrawal Force = The force required to fully mate or unmate a set of connectors without the effect of coupling, locking or similar devices. The insertion force is usually greater than the withdrawal force. Also called mating and unmating force. Insulation Body = Non-conductive part of a connector, to electrically and mechanically separate live parts and to protect against accidental touch. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 79

80 ODU MINI-SNAP Technical Information Keying = System of projections and grooves on mating connectors which prevent otherwise identical connectors from being mated. This is useful when several connectors of the same style are used in the same application (see page 6). Lower Limit Temperature = The lowest permissible temperature which a connector or a plug-in device is allowed to be operated. Materials The contacts are made of CuZn-alloy and gold-plated. The standard housings are made of brass with a matt-chromate surface finish. All other materials and surfaces on special request. (see page 7). Mating Cycles = Mechanical operation of connectors and plug-in devices by insertion and withdrawal. One mating cycle comprises one insertion and one withdrawal operation. Nominal Single Contact Current Load = Current load, which can load every single contact (see page 7). Operating Temperature of the ODU MINI-SNAP = Range between upper and lower temperature limits. - C to + C (see page 8) Print Connection (see page 7) Printed Circuit Board Boards, typically made of epoxy-filled glass fiber fabric, with conductive pattern on one or both sides, or in case of multilayer boards, also imbedded inside the board. They feature metallized holes for soldering wire-mounted components or for the insertion of insertion of resilient or rigid press-in pins or instead, pads for attaching components using surface mount technology (SMT). Reference Current = The current at which a connector can be operated permanently simultaneously through all contacts without reaching maximum temperature. Solder Termination (see page 7 Termination Styles) Termination techniques = Methods for connecting a wire to an electro-mechanical component, e.g. solderless connection according to IEC 6: respectively such as crimp, press-in etc. or solder connections. Upper Limit Temperature = highest permissible temperature at which a connector or a plug-in device is allowed to operate. This temperature includes the self-heating and the ambient temperature. At ODU MINI-SNAP + C (see page 7). Watertightness (See page 69) Wire = Wires may be provided with an insulation cover, an electrical shielding. Cables or conductors may consist of one or more wires. Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

81 Technical Information ODU MINI-SNAP Connectors shown in this catalog are designed to operate at high voltages and high frequencies. Care must be taken to assure that no person can come in contact with live conductors during installation or operation of the connectors. ODU assured that at the time of print all information in this catalog was correct. ODU reserves the right to change design and performance of any product to meet changing technical developments without prior notice. ODU reserves the right to discontinue any part in this catalog without prior notice and without obligation to continue production after the change. ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 8

82 ODU MINI-SNAP Technical Information Please visit our websites Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

83 Technical Information ODU MINI-SNAP Additional ODU Push-Pull Series ODU MINI-SNAP Series L > > keying with pin and groove > > locking: LP push-pull principle with locking fingers > > degree of protection: IP > > special features: a multitude of keying options ODU MINI-SNAP Series K > > keying with pin and groove > > locking: LP push-pull principle with locking fingers > > degree of protection: IP 68 ODU MINI-SNAP Series B > > keying with pin and groove > > locking: FP push-pull principle with locking fingers > > degree of protection: IP and IP 68 > > special features: tight sealing with low outside diameter ODU MINI-SNAP PC > > made out of plastic > > keying with half-shells > > locking: FP push-pull principle using conical sleeves > > degree of protection: - IP, - IP +EMC protection - IP 67, - IP 67+EMC protection ODU MINI-SNAP Series S > > keying with insulator > > locking: LP push-pull principle with locking fingers > > degree of protection: IP and IP 68 ODU MEDI-SNAP > > made out of plastic > > keying with pin and groove > > locking: LP push-pull principle with locking fingers > > sterilizable /Autoclaveable Ask for the separate product catalog: zentral@odu.de ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9, Page 8

84 ODU MINI-SNAP For your notes Page 8 ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr., D-8 Mühldorf/Inn, Phone +9/86 /66-, Fax +9/86 /6 6-9,

85 Please open

86 TELEFAX-INQUIRY ODU MINI-SNAP Fax-No. 86 / z. Hd. Vertrieb ODU MINI-SNAP ODU-Steckverbindungssysteme GmbH & Co. KG Pregelstraße D-8 Mühldorf am Inn From: Company: Name: Dept.: Street: City: Phone: Date: ODU MINI-SNAP Summary of Technical Requirements ) Connector application : ) Environment : ) Connector Type : Plug Receptacle Inline Receptacle 9 Plug 9 receptacle ) Special Version : ) Style : 6) Size :, 7) Series : don t care F 8) Keying : 9) Number of Positions : ) Termination : solder crimp PCB ) Cross section of wire : mm AWG ) Cable Dia. : mm ) Bend Sleeve (color) : ) Protection DIN EN 6 9 : IP (Standard) IP 68 (watertight) other ) Operating Temperature : C max. C min. 6) Electrical Specs: Operating Voltage : V AC V DC Operating Current : Constant A Short-term A, sec. 7) Chemical resistance against : 8) Other requirements : 9) Autoclavable, + C (see p. 8) : Yes No Number required : Production Quantity :

87 The Part Number Key F Part Number Key. Type A = Break-Apart-Plug Panel Mounted Plug G = Receptacle K = In-Line Receptacle S = Straight Plug W = Right-Angle Plug. Style - 9 and A X = Special. Size - and A A =,. Series F. Coding (Page (page 6) 6. Material/Surface - Housing (page6) 7. empty 8. Material - Insulator (page (Page 7) Contact Insert (Page (page 8 - ) e.g. 8-way = 8. Contact Type/Surface (page (Page ). Contact Diameter (page (Page ) M = mixed arrangement. +. Term. Cross Section (Page -). for special Contact 9. empty Collet System (page (Page 6) (page - ) Cable Bend Relief (page (Page 8) Example: G F C T 6 L F D Receptacle - Style - Size - Series F - Coding - Brass matt chromate Housing - PBT Insulator - 6-pos. - Socket (solder).7 µm Au - Term. Cross Section AWG/ S F C P 6 MFD 7 E S Plug - Style - Size - Series F - Coding - Brass matt chromate Housing - PBT Insulator - 6-pos. - Pin (solder).7 µm Au - Term. Cross Section AWG - Cable Diameter Blue Cable Bend Relief - Material Silicone

88 ODU MINI-SNAP PC ODU worldwide ODU Steckverbindungssysteme GmbH & Co. KG Otto Dunkel GmbH Pregelstr. 8 Mühldorf a. Inn Germany Phone: +9/86 /66- Fax: +9/86 / zentral@odu.de Internet: ODU France Phone: +// jean-nicolas.vikelas@odu.fr ODU Scandinavia Phone: +6/76/ peter.biloch@odu.se ODU UK Phone: +/ sales@odu-uk.co.uk ODU USA Phone: +/8 / 8 sales@odu-usa.com ODU Shanghai Trading Phone: +86// oduchina@odu.com.cn Location plan Augsburg A8 A96 Nuremberg Landshut A9 A9 B99 B A9 Haag Mühldorf A9 B MUNICH B99 A99 B B A8 A9 Rosenheim Altötting B GERMANY A B AUSTRIA Salzburg Passau Linz ODU s headquarters and factory are located in Mühldorf at the river Inn, approximately miles east of Munich, at the foothills of the Bavarian Alps. Production: KOMMA / 7-Katalog-MINI-SNAP-F A9 Garmisch- Partenkirchen