INSTALL GUIDE OEM-GM(RS)-GM7-[FLRSGM7]-EN

Transcription

1 INSTALL GUIDE DOCUMENT NUMBER 0 REVISI DE 00 FIRMWARE OEM-GM(RS)-GM-[FLRSGM] HARDWARE FLRSGM ESSORIES FLPROG (REQUIRED) NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work. BEFORE INSTALLI - Connect module to computer - Login to Weblink account - Flash firmware to module (module is not preloaded with firmware) - Use accessories accordingly (accessories are sold separately)

2 PAGE OF VEHICLE LIST - OF DA IMMOBILIZER BYPASS X LOCK /STANDALE MOD. PRIORITY UNLOCK DOOR LOCK DOOR UNLOCK ARM OEM ALARM DISARM OEM ALARM DOOR STUS OUTPUT TRUNK STUS OUTPUT BRAKE PEDAL STUS OUTPUT TACHOMETER OUTPUT DA/MUX ER CTRL HOOD STUS OUTPUT* PARKING LIGHT CTRL RAP SHUTDOWN CTRL - Colorado STD key without OnStar - Silverado 00 STD key with OnStar - Silverado 00 STD key without OnStar - Silverado 00HD STD key with OnStar - Silverado 00HD STD key without OnStar - Silverado 00HD STD key with OnStar - Silverado 00HD STD key without OnStar - Suburban STD key with OnStar - Suburban STD key without OnStar - Tahoe STD key with OnStar - Tahoe STD key without OnStar - Canyon STD key with OnStar - Canyon STD key without OnStar - Sierra 00 STD key with OnStar - Sierra 00 STD key without OnStar - Sierra 00HD STD key with Onstar - Sierra 00HD STD key without Onstar - Sierra 00HD STD key with Onstar - Sierra 00HD STD key without Onstar - Yukon STD key with Onstar Yukon STD key without Onstar * Available only if vehicle is equipped with factory hood switch. TRUNK/HCH RELEASE YEAR Colorado STD key with OnStar INSTALL TYPE MODEL GMC CHEVROLET MAKE FEURES

3 PAGE OF BOX CTENTS - OF BOX CTENTS 0 PIN T-HARNESS VS LED BLUE BLACK BLACK PROGRAMMING BUTT LED A G F B E BLACK RF PORT/ WEBLINK PORT BLUE TELEMIC PORT BLACK 0 VS PIN MS VS VS AFTERMARKET HOOD SWITCH AND CABLE T-HARNESS C D MS WHITE THE ADS-HRN(RS)-GMC0- CABLE IS INCLUDED IN KITS MANUFACTURED AFTER 0/0/0. CTACT YOUR AUTHORIZED DEALER, IF THIS CABLE IS NOT INCLUDED. VS WARNING STICKER JS VS WEBLINK CABLE (required accessory sold separately) WEBLINK CABLE WEBLINK PORT COMPUTER USB PORT PIN BLACK CABLE

4 PAGE OF POLARITY LOCI COMPENT LOCOR Swc pin 0 OBDII Light switch POSITI - TYPE Canyon with OnStar - NAME Colorado with OnStar DESCRIPTI YEAR MODEL GMC CHEVROLET MAKE TYPE - CHART - OF /Gray Swc pin 0 OBDII Light switch /Gray

5 PAGE OF TYPE - WIRING DIAGRAM - OF VEHICLE IGNITI SWITCH A G RF PORT/WEBLINK PORT B F TELEMIC PORT A VS IGNITI E C D A VS IGNITI HARNESS A MS B VS PK B B VS PK HARNESS 0 0 MS B B A A OBDII C 0 0 BROWN/BLACK - PARKING LIGHT OUTPUT 0 GRAY (NC) 0 EMPTY 0 EMPTY 0 EMPTY 0 PURPLE/GREEN (NC) 0 EMPTY 0 BLUE/GREEN (NC) 0 EMPTY 0 EMPTY GRAY/GREEN - HORN OUTPUT DKGREEN/GREEN (NC) OBDII GREEN/WHITE - OUTPUT 0-0 VEHICLE OPTIAL PARKING LIGHT HORN D 0 0 GRAY/WHITE - HOOD STUS INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CNECT TO AFTERMARKET HOOD SWITCH AFTERMARKET HOOD SWITCH

6 PAGE OF DESCRIPTI pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector NAME COMPENT LOCOR - LOCI Sierra 00HD / 00HD with OnStar POLARITY - GMC Sierra 00 with OnStar - Tahoe with OnStar - POSITI Suburban with OnStar - TYPE Silverado 00HD / 00HD with OnStar - CHEVROLET Silverado 00 with OnStar YEAR MODEL MAKE TYPE - CHART - OF

7 PAGE OF POSITI POLARITY LOCI COMPENT LOCOR pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector NAME TYPE - DESCRIPTI YEAR MODEL Yukon with OnStar GMC MAKE TYPE - CHART - OF

8 PAGE OF TYPE - WIRING DIAGRAM - OF VEHICLE IGNITI SWITCH WITH ADS-HRN(RS)-GMC0- A G RF PORT/WEBLINK PORT B F TELEMIC PORT IGNITI JS E C A VS D A VS IGNITI HARNESS A VS MS OR WITHOUT ADS-HRN(RS)-GMC0- B A CUT FROM HARNESS VS 0 0 RED YELLOW PINK BROWN V - 0 MUX - 0 IGNITI - 0 ESSORY - 0 B B MS VS (NC) A A B VS PK C 0 B VS 0 BROWN/BLACK - PARKING LIGHT OUTPUT 0 GRAY (NC) 0 EMPTY 0 EMPTY 0 EMPTY 0 PURPLE/GREEN (NC) 0 EMPTY 0 BLUE/GREEN (NC) 0 EMPTY 0 EMPTY GRAY/GREEN - HORN OUTPUT DKGREEN/GREEN (NC) PK HARNESS OBDII D OBDII 0 GREEN/WHITE - OUTPUT GRAY/WHITE - HOOD STUS INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CNECT TO AFTERMARKET HOOD SWITCH VEHICLE OPTIAL PARKING LIGHT HORN AFTERMARKET HOOD SWITCH

9 PAGE OF COMPENT LOCOR pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector Lock X pin Brown/Yellow Unlock X pin Brown/White pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector Lock X pin Brown/Yellow Unlock X pin Brown/White pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector Lock X pin Brown/Yellow Unlock X pin Brown/White pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector Lock X pin Brown/Yellow Unlock X pin Brown/White NAME LOCI DESCRIPTI POLARITY - Tahoe without Onstar - POSITI Suburban without Onstar TYPE - CHEVROLET Silverado 00HD / 00HD without Onstar - Silverado 00 without Onstar YEAR MODEL MAKE TYPE - CHART - OF

10 PAGE 0 OF GMC Sierra 00 / 00 without Onstar Yukon without Onstar - - POLARITY LOCI COMPENT LOCOR pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector Lock X pin Brown/Yellow NAME POSITI DESCRIPTI TYPE - Sierra 00 without Onstar YEAR MODEL MAKE TYPE - CHART - OF Unlock X pin Brown/White pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector Lock X pin Brown/Yellow Unlock X pin Brown/White pin 0 0 pin 0 Purple/Black connector 0 pin 0 Purple/Yellow connector V 0 pin 0 Red/ connector 0 pin 0 White/Purple connector Lock X pin Brown/Yellow Unlock X pin Brown/White

11 PAGE OF TYPE - WIRING DIAGRAM - OF VEHICLE IGNITI SWITCH WITH ADS-HRN(RS)-GMC0- A G RF PORT/WEBLINK PORT B F TELEMIC PORT IGNITI JS E C A VS D A VS IGNITI HARNESS A VS MS OR WITHOUT ADS-HRN(RS)-GMC0- B A CUT FROM HARNESS VS 0 0 RED YELLOW PINK BROWN B V - 0 MUX - 0 B IGNITI - 0 ESSORY - 0 MS A VS B VS (NC) A PK B VS PK HARNESS BCM C 0 BLUE 0 BROWN/BLACK - PARKING LIGHT OUTPUT 0 GRAY (NC) 0 EMPTY 0 EMPTY 0 EMPTY 0 PURPLE/GREEN - LOCK OUTPUT 0 EMPTY 0 BLUE/GREEN (NC) 0 EMPTY 0 EMPTY GRAY/GREEN - HORN OUTPUT DKGREEN/GREEN - UNLOCK OUTPUT X LOCK - UNLOCK - 0 D 0 0 X 0 GRAY/WHITE - HOOD STUS INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CNECT TO AFTERMARKET HOOD SWITCH OBDII OBDII GREEN/WHITE - OUTPUT OPTIAL AFTERMARKET HOOD SWITCH 0-0 VEHICLE PARKING LIGHT HORN

12 PAGE OF TYPE POSITI POLARITY LOCI COMPENT LOCOR /Gray pin 0 X pin Brown/Yellow pin Brown/White - Lock Unlock - NAME DESCRIPTI MODEL Canyon with OnStar YEAR MAKE CHEVROLET Colorado with OnStar GMC TYPE - CHART - OF X pin 0 /Gray Lock X pin Brown/Yellow Unlock X pin Brown/White

13 PAGE OF TYPE - WIRING DIAGRAM - OF VEHICLE IGNITI SWITCH A G RF PORT/WEBLINK PORT B F TELEMIC PORT A VS IGNITI E C D A VS IGNITI HARNESS A MS B VS PK B B VS PK HARNESS 0 0 MS B B A A OBDII C 0 0 BROWN/BLACK - PARKING LIGHT OUTPUT 0 GRAY (NC) 0 EMPTY 0 EMPTY 0 EMPTY 0 PURPLE/GREEN - LOCK OUTPUT 0 EMPTY 0 BLUE/GREEN (NC) 0 EMPTY 0 EMPTY GRAY/GREEN - HORN OUTPUT DKGREEN/GREEN - UNLOCK OUTPUT OBDII GREEN/WHITE - OUTPUT 0-0 VEHICLE PARKING LIGHT HORN OPTIAL D BCM 0 BLUE X 0 GRAY/WHITE - HOOD STUS INPUT LOCK - UNLOCK - WITHOUT OEM HOOD SWITCH: INSTALL AND CNECT TO AFTERMARKET HOOD SWITCH 0 AFTERMARKET HOOD SWITCH 0 X

14 PAGE OF PROGRAMMING PROCEDURE - OF 0 Insert key into ignition. 0 0 Turn key to position. Turn key to position. LED will turn. Turn key to position Turn key to position. Turn key to position. Insert key into ignition. Module Programming Procedure completed. LED will turn solid RED. Remove key. Remove key. 0 Wait, LED will turn solid GREEN for seconds. 0 Wait, LED will flash GREEN rapidly. Turn key to position. Insert key into ignition. 0 0

15 VALET MODE PROGRAMMING PROCEDURE - OF >> NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming. 0 Time restriction. Complete next step within seconds. 0 >> PAGE OF To exit valet mode: repeat steps to. Cycle ignition five times [x /] rapidly. ENGINE STOP 0 0 Wait, LED will turn solid RED for seconds. Set ignition to position. ENGINE STOP 0 Valet Mode Programming Procedure completed.

16 PAGE OF NAVIGI PROCEDURE - OF >> It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP. 0 >> Module must be programmed to the vehicle. 0 >> Use the Module Navigation Chart on the next page. 0 Set ignition to position. 0 TO ESS THE MENUS: Press and hold programming button until LED turns solid GREEN. 0 IN THE MENUS: Press the programming button as many times as the menu number indicates. LED will flash GREEN an equal amount of times continuously. 0 0 TO ESS THE OPTIS: Press and hold programming button until LED turns solid RED. 0 IN THE OPTIS: Press the programming button as many times as the option number indicates. LED will flash RED an equal amount of times continuously. TO ESS THE SETTINGS: Press and hold programming button until LED turns solid GREEN. Configure every other setting and proceed to step. [Z] LED will flash GREEN as many times as the current (or default) setting number, continuously. MANDORY: EXIT NAVIGI. Press and hold programming button for seconds. LED will flash RED rapidly. Release programming button. LED will turn. [Z] IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED will flash GREEN an equal amount of times continuously. Module navigation completed. To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. >> Failure to exit the Module Navigation will drain vehicle battery. [Y] To save and return to the OPTIS: Press and hold programming button until LED turns solid RED. [Y] LED will flash RED as many times as the current option number continuously. ENGINE STOP 0 0 [X]

17 PAGE OF [Y] OPTIS [X] MENUS NAVIGI CHART: NOTES I Default settings are listed in bold. 0 II Make sure the option is covered on the vehicle before attempting to change the setting [Z] SETTINGS NAVIGI CHART - OF CFIGURI DISARM/UNLOCK BEFORE RELOCK AFTER RELOCK AFTER SHUTDOWN FORCE UNLOCK ALL FIRST PRESS ENABLE 0 DISABLE* 0 TAKEOVER MIN 0 0 MIN 0 0 MIN 0 MIN 0 MIN 0 0 MIN 0 MIN 0 MIN 0 0 SEC 0 0 SEC 0 0 SEC 0 0 SEC 0 SEC 0 0 SEC 0 SEC 0 0 RUN TIME WAIT TO DELAY 0 0 SEC *Vehicle will shutdown when a door is opened.

18 PAGE OF [Y] OPTIS [X] MENUS NAVIGI CHART: NOTES 0 [Z] SETTINGS NAVIGI CHART - OF HORN EVENT TRIGGER CFIGURI 0-0 Technical Support only 0 HORN CHIRPS WIDTH 0 DOUBLE LOCK 0 LOCK + UNLOCK 0 LOCK + UNLOCK + 0 DOUBLE LOCK msec 0 msec 0 0 msec 0 *Vehicle will shutdown when a door is opened.

19 [X] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC REMOTE ER ERROR CODES - OF I WARNING: The following applies only when the parking lights are connected and supported by the system. 0 Foot brake is. 0 Hood is open. II After a remote starter failure, the parking lights will flash [X] number times to indicate an error code. See table. 0 Engine tach signal is lost. 0 System is in Valet Mode. 0 Vehicle is moving (VSS). 0 Glow plug timeout error. 0 RS not synchronized. Start vehicle with OEM key for sec before trying a new RS sequence. 0 CAN communication failure during RS sequence. REMOTE ER ERROR CODES: NOTES PAGE OF

20 I II III DURING PROGRAMMING DURING REMOTE WITH IGNITI DIAGNOSTIC TEST LED STUS DIAGNOSTICS - OF Flashing RED Missing/wrong information from firmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. Solid GREEN then Module correctly programmed. No activity or module already programmed. Flashing RED Module incorrectly programmed. Solid RED Module incorrectly programmed. Flashing GREEN Module correctly programmed and operational. Solid GREEN then Reset in progress. Invalid ground when running status from remote starter. Flashing RED Module incorrectly programmed or connected. Solid RED Module not programmed. Waiting for more vehicle information. Flashing GREEN False ground when running status from remote starter. Solid GREEN then Reset in progress. Module at rest and ready for a remote start sequence. PAGE 0 OF

21 RESET PROCEDURE - OF 0 Disconnect all connectors from module except the BLACK 0-PIN connector. 0 Reconnect all connectors. 0 Disconnect the BLACK 0-PIN connector. 0 Repeat programming procedure. 0 PRESS AND HOLD the module s programming button while connecting the BLACK 0-PIN connector. >> Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. 0 Wait, LED will flash RED. RELEASE programming button. 0 LED will turn RED for seconds. 0 Module RESET completed. PAGE OF

22 INSTALLI CHECKLIST - OF PAGE OF CHECKLIST WARNING: Vehicle engine will start many times. Test in a well ventilated area. Close all vehicle doors, hood and trunk. Press LOCK button three times [x] rapidly on the OEM keyfob to remote start vehicle. Question : Does the vehicle remote start? YES: Go to next step. NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists. Press LOCK button three times [x] rapidly on the OEM keyfob to shut down vehicle. Question : Does the vehicle shut down? YES: Go to next step. NO: Repeat step. If the problem persists, press on the brake pedal once [x] to shut down the vehicle and call technical support. RAP Shutdown test Question : Did the radio, interior controls, and headlights turn off within 0 seconds after remote start shutdown? YES: Go to next step. NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists. Open hood. If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. Press LOCK button three times [x] rapidly on the OEM keyfob to remote start vehicle. Question : Does the vehicle remote start? YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. NO: Go to next step. Close hood. 0 Enter vehicle and close the doors. Press LOCK button three times [x] rapidly on the OEM keyfob to remote start vehicle. Wait for the vehicle to start. Press brake pedal. Question : Does the vehicle shut down? YES: Go to next step. Exit vehicle. Installation checklist completed. NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.