Automotive Data Solutions Inc.

Transcription

1 Automotive Data Solutions nc. NSTALL GUDE V Available for : Version FRançaise disponible en ligne au please visit for complete product details The brand names and logos found in this guide are property of their respective owners. Automotive Data Solutions nc. 0 NOTCE: The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. This guide has been written for properly trained technicians; a certain level of skill & knowledge is therefore assumed. Please review the nstallation Guide carefully before beginning any work.

2 ALL VEHCLES Page of V 00 MODULE NAVGATON PROCEDURE - OF - FOLLOW STEPS TO FOR EACH MENU STEP - MENUS,,,, 5 & 6* t is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. Module must be programmed to the vehicle. Remove key from ignition. n the MENUS: as many times as the menu To exit the Module Navigation at any time: Follow STEP. To access the MENUS: (*Not applicable for menu 6) To access the OPTONS: RED. (*Not applicable for menu 6) n the OPTONS: as many times as the option LED will flash RED an equal STEP - MENUS, & To access the SETTNGS: LED will flash GREEN as many times as the current (or default) setting number, continuously. To save and return to the OPTONS: RED. LED will flash RED as many times as the current option number continuously. n the SETTNGS: as many times as neccesary to access your setting. Configure every other setting and proceed to STEP. Automotive Data Solutions nc. 0

3 ALL VEHCLES Page of V 00 MODULE NAVGATON PROCEDURE - OF - FOLLOW STEPS TO FOR EACH MENU STEP - MENU To access the READNGS: LED will turn ON [] or OFF [0] to indicate the current reading number. STEP - MENU 5 To access the TESTS: n the TESTS: once [x] to send the command. (Repeat as many times as neccesary) STEP - MENU 6 LED will flash RED once [x] to indicate the first option then LED will flash GREEN as many times as the current summary number. LED will flash RED three times [x] to indicate the third option then LED will flash GREEN as many times as the current summary number. LED will flash RED twice [x] to indicate the second option then LED will flash GREEN as many times as the current summary number. To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. MANDATORY: EXT MODULE NAVGATON button for 7 seconds. STEP - MENUS,,,, 5 & 6 Module navigation completed. Failure to exit the Module Navigation will drain vehicle battery. LED will flash RED rapidly. LED will turn OFF. Automotive Data Solutions nc. 0

4 ALL VEHCLES Page of V 00 MENU, & - MODULE NAVGATON PROCEDURE t is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. Module must be programmed to the vehicle. Remove key from ignition. To exit the Module Navigation at any time: Follow step 8. To access the MENUS: 6 7 n the SETTNGS: as many times as neccesary to access your setting. To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. To save and return to the OPTONS: RED. n the MENUS: as many times as the menu LED will flash RED as many times as the current option number continuously. Configure every other setting and proceed to step 8. 8 MANDATORY: EXT MODULE NAVGATON To access the OPTONS: RED. button for 7 seconds. LED will flash RED rapidly. LED will turn OFF. n the OPTONS: as many times as the option LED will flash RED an equal 9 Module navigation completed. Failure to exit the Module Navigation will drain vehicle battery. 5 To access the SETTNGS: LED will flash GREEN as many times as the current (or default) setting number, continuously. Automotive Data Solutions nc. 0

5 ALL VEHCLES Page 5 of V 00 t is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. Module must be programmed to the vehicle. Remove key from ignition. To exit the Module Navigation at any time: Follow step 6. MENU - MODULE NAVGATON PROCEDURE To access the MENUS: n the MENUS: as many times as the menu 6 7 To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. MANDATORY: EXT MODULE NAVGATON button for 7 seconds. LED will flash RED rapidly. LED will turn OFF. Module navigation completed. Failure to exit the Module Navigation will drain vehicle battery. To access the OPTONS: RED. 5 n the OPTONS: as many times as the option LED will flash RED an equal To access the READNGS: LED will turn ON [] or OFF [0] to indicate the current reading number. Automotive Data Solutions nc. 0

6 ALL VEHCLES Page 6 of V 00 MENU 5 - MODULE NAVGATON PROCEDURE t is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. Module must be programmed to the vehicle. Remove key from ignition. To exit the Module Navigation at any time: Follow step 7. To access the MENUS: n the MENUS: as many times as the menu To access the OPTONS: RED n the TESTS: once [x] to send the command. (Repeat as many times as neccesary) To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. MANDATORY: EXT MODULE NAVGATON button for 7 seconds. LED will flash RED rapidly. LED will turn OFF. Module navigation completed. Failure to exit the Module Navigation will drain vehicle battery. n the OPTONS: as many times as the option LED will flash RED an equal 5 To access the TESTS: Automotive Data Solutions nc. 0

7 ALL VEHCLES Page 7 of V 00 t is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. Module must be programmed to the vehicle. Remove key from ignition. To exit the Module Navigation at any time: Follow step 8. MENU 6 - MODULE NAVGATON PROCEDURE To access the MENUS: n the MENUS: as many times as the menu 8 9 To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. MANDATORY: EXT MODULE NAVGATON button for 7 seconds. LED will flash RED rapidly. LED will turn OFF. Module navigation completed. Failure to exit the Module Navigation will drain vehicle battery. LED will flash RED once [x] to indicate the first option then LED will flash GREEN as many times as the current summary number. 5 LED will flash RED twice [x] to indicate the second option then LED will flash GREEN as many times as the current summary number. LED will flash RED three times [x] to indicate the third option then LED will flash GREEN as many times as the current summary number. Automotive Data Solutions nc. 0

8 ALL VEHCLES Page 8 of V 00 MENU - CONFGURATON - DATA & HARDWRE OVERVEW Set, change and adjust features. Default settings are listed in bold. Make sure the option is covered on the vehicle before attempting to change the setting. * Vehicle will shutdown when a door is opened. APPLCATON -AL(DL) -AL(RS) -DL -BLADE-AL(DL) MENU OPTONS SETTNGS DSARM/UNLOCK BEFORE OFF START ON OFF RELOCK AFTER START ON OFF RELOCK AFTER SHUTDOWN ON FORCE UNLOCK ALL ON FRST OFF PRESS ON ENABLE 5 TAKEOVER* DSABLE 5 SEC 90 SEC 6 SECURE TAKE OVER DELAY 0 MN 0 MN DSABLE 7 FACTORY KEYLESS HOLD LOCK SEC RS SEQUENCE LOCK + UNLOCK + LOCK LOCK + LOCK + LOCK 0 MN 05 MN 0 MN 8 MODULE RUN TME 5 MN 5 5 MN 6 0 MN 7 5 MN 0 SEC 05 SEC 08 SEC 0 SEC 9 WAT TO START DELAY 5 5 SEC 6 0 SEC 7 5 SEC 8 0 SEC OFF/MANUAL NPUT TRGGER ALWAYS ON -0C/+F -05C/+F 0 HEATED SEATS CONTROL 5 +00C/+F 6 +0C/+0F 7 +08C/+6F 8 +C/+5F OFF/MANUAL NPUT TRGGER ALWAYS ON -0C/+F -05C/+F REAR DEFOGGER CONTROL 5 +00C/+F 6 +0C/+0F 7 +08C/+6F 8 +C/+5F OFF/MANUAL NPUT TRGGER ALWAYS ON +0C/+68F COOLED SEATS CONTROL +C/+76F 5 +8C/+8F 6 +C/+90F 7 +6C/+96F CONFGURATON Automotive Data Solutions nc. 0

9 ALL VEHCLES Page 9 of V 00 MENU - COMMANDS ACCEPTED FROM THE RS - DATA & HARDWRE OVERVEW Void a specific data command and allow a specific hardwire command. Default settings are listed in bold. Make sure the option is covered on the vehicle before attempting to change the setting. APPLCATON * -AL(DL) * -DL ** -BLADE-AL(DL) MENU OPTONS SETTNGS DATA COMMANDS ACCEPTED FROM THE RS DSABLED DSARM DSABLED UNLOCK DRVER DOOR DSABLED UNLOCK OTHER DOORS DSABLED LOCK DSABLED 5 ARM ANALOG*/DSABLED** 6 TRUNK RELEASE ANALOG&DATA*/ENABLED** ANALOG*/DSABLED** 7 HORN ANALOG&DATA*/ENABLED** ANALOG*/DSABLED** 8 LEFT SLDNG DOOR ANALOG&DATA*/ENABLED** ANALOG*/DSABLED** 9 RGHT SLDNG DOOR ANALOG&DATA*/ENABLED** ANALOG*/DSABLED** 0 PARK LGHTS ANALOG&DATA*/ENABLED** ANALOG*/DSABLED** STARTER ANALOG&DATA*/ENABLED** MENU - STATUS REPORTED BY THE MODULE TO THE RS - DATA ONLY OVERVEW Void a data status sent from the module to the RS and keep the hardwire output enabled. Default settings are listed in bold. Make sure the option is covered on the vehicle before attempting to change the setting. APPLCATON -AL(DL) -DL -BLADE-AL(DL) MENU OPTONS SETTNGS DATA STATUS REPORTED BY THE MODULE TO THE RS DSABLED DOOR STATUS DSABLED TRUNK STATUS DSABLED HOOD STATUS DSABLED E-BRAKE STATUS DSABLED 5 BRAKE STATUS DSABLED 6 TACHOMETER DSABLED 7 VSS DSABLED 8 GLOWPLUG STATUS DSABLED 9 OEM REMOTE STATUS Automotive Data Solutions nc. 0

10 ALL VEHCLES Page 0 of V 00 MENU - DSPLAY VEHCLE STATUS ON LED - DATA ONLY OVERVEW Troubleshoot every status individually. Make sure the option is covered on the vehicle before attempting to change the setting. APPLCATON -AL(DL) -AL(RS) -DL -BLADE-AL(DL) MENU OPTONS READNGS DSPLAY VEHCLE STATUS ON LED DRVER DOOR STATUS ON OTHER DOORS STATUS ON TRUNK STATUS ON HOOD STATUS ON 5 E-BRAKE STATUS ON 6 BRAKE STATUS ON 7 TACHOMETER STATUS ON 8 VSS STATUS ON 9 GLOW PLUG STATUS ON 0 OEM REMOTE STATUS GREEN or BLUE: LOCK/ARM RED: UNLOCK/DSARM MENU 5 - OUTPUTS TEST - DATA ONLY (DB NOT COVERED) OVERVEW Send a supported data command to the vehicle with the module. Make sure the option is covered on the vehicle before attempting to change the setting. APPLCATON -AL(DL) -AL(RS) -DL -BLADE-AL(DL) MENU OPTONS TESTS DSARM SEND COMMAND UNLOCK DRVER DOOR SEND COMMAND 5 DATA OUTPUTS TEST UNLOCK ALL DOORS SEND COMMAND LOCK SEND COMMAND 5 ARM SEND COMMAND 6 TRUNK RELEASE SEND COMMAND 7 HORN* SEND COMMAND 8 LEFT SLDNG DOOR SEND COMMAND 9 RGHT SLDNG DOOR SEND COMMAND 0 PARKNG LGHTS SEND COMMAND Automotive Data Solutions nc. 0

11 ALL VEHCLES Page of V 00 MENU 6 - NSTALLATON NFORMATON - DATA & HARDWRE OVERVEW Get a detailed installation summary. APPLCATON -AL(DL) -AL(RS) -DL -BLADE-AL(DL) MENU OPTONS SUMMARY V.0 PROGRAMMNG MENU VERSON V. V. ANALOG DATALNK WAY DATALNK NSTALLATON METHOD ENCRYPTR WAY 5 DB WAY 6 RF-DB 6 7 RF DATALNK WAY NO ERROR VALET MODE HOOD OPEN (DATA) HOOD OPEN (ANALOG) LAST ERROR CODE 5 BRAKE 6 TACH LOST 7 TACH OVER REV (500RPM) 8 DOOR OPEN NSTALLATON NFORMATON Automotive Data Solutions nc. 0

12 ALL VEHCLES Page of V 00 SUPPORTED FRMWARE CHART - REVSON 09// FRMWARE SUPPORTED VERSON DL-CH YES V. DL-CH5 YES V.6 DL-CH6 NO N/A DL-CH7 YES V.0 DL-FM NO N/A DL-GM YES V.6 DL-GM NO N/A DL-GM NO N/A DL-GM NO N/A DL-GM5 NO N/A DL-GM6 NO N/A DL-GM7 YES V.5* DL-GM8 NO N/A DL-GM9 YES V.0 DL-HA NO N/A DL-HK NO N/A DL-HK NO N/A DL-HK NO N/A DL-MA YES V.5 DL-M YES V.5 DL-N NO N/A** DL-N YES V. DL-N YES V. DL-N YES V.6 DL-SUB YES V.0 DL-TL YES V. DL-TL YES V.9 DL-TL YES V.6 DL-TL YES V.0 DL-VO NO N/A DL-VO YES V.0 DL-VO YES V.0 DL-VO YES V.0 DL-VW NO N/A*** DL-VW YES V. DL-VW NO N/A DL-VW YES V. DL-VW YES V. DL-VW5 YES V.0 FRMWARE SUPPORTED VERSON RS-CH YES V. RS-CH5 YES V. RS-TL YES V.0 RS-TL YES V.0 RS-TL YES V.0 RS-HK YES V.0 TB-CH6 NO N/A TB-FM NO N/A TB-FM YES V. TB-FM YES V. TB-FM NO N/A TB-GD YES V.6 TB-GM YES V.0 TB-GM YES V.0 TB-GM YES V.0 TB-HA NO N/A TB-HA NO N/A TB-HK NO N/A TB-HK NO N/A TB-PK YES V.0 TB-PL NO N/A TB-PL YES V.0 TB-PL YES V.0 TB-PR NO N/A TB-SUB YES V. TB-TL NO N/A TB-TL NO N/A *EXLUDE ALCA- ENC AND BLADE-K **DEPRECATED, USE N, N OR N ***DEPRECATED, USE VW, VW OR VW Automotive Data Solutions nc. 0