MX Axis Vertical Machining Center

Size: px

Start display at page:

Download "MX Axis Vertical Machining Center"

Junior Hector Edwards
6 years ago
Views:

1 MX Axis Vertical Machining enter

2 For a smooth Transition To -Axis Machining Excellent operability 60-tool hain Magazine The MX-520 heralds a new era in 5 axis machining for 3 axis users making the transition to full 5 axis operation. Matsuura, the established world leader in 5 axis machining, make this transition process simple, effortless & cost effective. 2

3 Part Name Dimensions Programming Method Sub base A4A mm ( in.) Programmed utilising N standard feature - "Manual Guide i" with no external AM system. Multi-face machining with minimal cost and maximum productivity. Part Name Dimensions Programming Method Finger S mm ( in.) Programmed using incorporating multi-face machining of multiple parts using tombstone fixturing. Machining of slant faces included, which is not available with horizontal machining centres. GibbsAM and the GibbsAM logo are registered trademarks of Gibbs and Associates in the United States of America and other countries. Part Name Dimensions Programming Method Impeller Ø2950 mm (Ø in.) Highly advanced simultaneous 5-axis machining fully utilizing the A-axis stroke of -25to +degrees. Utilizing the full capabilities of the MX-520, programming and machining times are drastically reduced. High quality surface finish as standard. Part Name Dimensions Programming Method Automotive valve A5056 Ø074 mm (Ø in.) One-hit machining achieved the complex shaped prototype. Simplified machining process by combination of Tilted Working Plane ommand & Tool enter Point ontrol. Using the simple jig enables 46 faces index machining and reduce the jig cost significantly.

4 Ultra Safe ollision Protection Safe & Secure ollision Stop orted ic operation supp Manual / automat orted pp is machining su Simultaneous 5-ax OFF ON On-Line Link with P *Intelligent Protection System simulates your programmed component alerting the user to any interference or collision before any actual machining. * Requires end user P consult Matsuura for full specifications. External P ollision Avoidance during Setup Tool length compensation data is linked with the Intelligent Protection System. As N data changes, P compensation data is automatically updated. ollision Avoidance during Automatic Operation ollision check can be activated during simulation. The collision check function renders the part in real time on screen. 4 Machining center Standard Accessories Software Machine model data ommunication cable * A high quality cable is provided to route from the N to your P ommunication oard P communication board

5 MIMS Eco Meister Thermal Meister Environment Accuracy Stable Accuracy Power Saving Power cut-off function Energy-saving devices installed Spindle thermal displacement compensation Meister's knowledge, skills, and ideas combined Accuracy Environment Simple Secure Reliability Meister Operability Meister Secure Machine Down Time Reduction Preventive maintenance support functions Machine restoration support functions Simple Fuss-Free Simple Operation Tool setup support Part setup support Restart after machining stop Option Reliability Meister Plus Secure Increased Security Provided Electronic manual ing function * Reliability Meister Plus requires a P. onsult Matsuura for more information. 5

6 Y-axis Z-axis Highly Rigid Ram Type Structure The MX-520 has been designed with a RAM type structure, offering a compact & highly rigid machining platform. Design advances have afforded the MX-520 a large machining enclosure, within its class. Matsuuras established high accuracy & reliability comes as standard with MX-520. X-axis A-axis -axis Ø300 mm (Ø.8 in.) Table Two table sizes are available for the MX Ø300 mm (Ø.8 in.) and Ø500 mm (Ø9.68 in.) (option). Stroke Ø500 mm (Ø9.68 in.) Table Option X-axis stroke 630 mm (24.8 in.) Y-axis stroke 560 mm (22.04 in.) Z-axis stroke 5 mm (20.07 in.) A-axis rotation anglealong the X-axis -25+deg -axis rotation anglealong the Z-axis 360deg Maximum Work Size Max. work dimensions Loading capacity Ø520H350 mm (Ø20.47H3.77 in.) 200 kg (440 lb.) H350 mm (H3.78 in.) Ø520 mm (Ø20.47 in.) The headstock & trunnion configuration has been designed in such a way as to minimise the possibility of collision, whilst maximising tool access & reach. 6

7 Ergonomic Operation Possessing a front door opening of 805 mm (3.69 in.) and a distance from the operator to the table centre of 385 mm (5.5 in.), the machine ensures designed ergonomic operator comfort and easy facilitation of work setting. The ceiling cover can be quickly opened for the loading of large-sized parts with a crane. Opening width 805 mm (3.69 in.) hain magazine with 60 tools 365 mm (4.37 in.) Easy tool setup rane access Easy operator access to the spindle Distance from machine front to table center 385 mm (5.5 in.) Excellent accessibility 7

Spindles from the pioneers of High Speed Machining spindle for a wide range of materials from steel to aluminum

Spindle Motor Power & Torque Diagram T40 2,000 Torque N m 500 20.0N m 0 T40 2,000 Torque up type Power kw 50.

43kW 40 25%ED Rating ontinuous Rating 700 630 00 T40 20,000 500 0.

5N m 8.8N m 50%ED Rating ontinuous Rating 0.45kW 0.33kW 29.4N m 23.

without adjacent tools Max. tool length 300 mm.8 in. kg 22 lb. Max. tool mass Ø80 Ø3.4 Ø50 Ø5.

4000 000 2000 Torque N m Spindle speed 300.8 6.0N m Spindle speed 6.0N m 5%ED. Rating 30min.

4,000,20,800 378 7,000 924 3,000 270 Tool Details utting Width & Depth Spindle Speed Feedrate Quantity W=70mm

75 in. D=3mm 0. in. Ø25mm W=22mm 2 tooth D=6mm 0.98 in. Ø20mm 0.78 in. 4 tooth 0.86 in. 0.23 in. W=3mm 0. in. D=30mm.

ipm Quantity UDrill Tap Tool Details Spindle Speed Feedrate Quantity 500 427 220 8.

8 Spindles from the pioneers of High Speed Machining spindle for a wide range of materials from steel to aluminum Assembled in a dedicated clean room Spindle runout less than at spindle end. Spindle Motor Power & Torque Diagram T40 2,000 Torque N m N m 0 T40 2,000 Torque up type Power kw 50.0kW TORQUE POWER kW 0.43kW 40 25%ED Rating ontinuous Rating T40 20, S45 Endmill S45 JIS#40 20,000 Facemill S45 Endmill S kW 5.0kW 5kW 8.5N m 0 5kW.0kW kw 79.5N m 8.8N m 50%ED Rating ontinuous Rating 0.45kW 0.33kW 29.4N m 23.9N m Type of tool shank JIS T Ø50 mm Max. tool diameter Ø80 mm Ø3.4 in Ø5.90 in. without adjacent tools Max. tool length 300 mm.8 in. kg 22 lb. Max. tool mass Ø80 Ø3.4 Ø50 Ø5.90 Facemill Option Power kw 50 Maximum tool shape Units: mm in. JIS#40 2, Torque N m Spindle speed N m Spindle speed 6.0N m 5%ED. Rating 30min. Rating ontinuous Rating kW 8.8N m kW kw 2.0N 2N m 9.0N m Option Power kw N 67N m 0 7.5kW 48.0N m Torque N m N m Spindle speed min - Standard Tool Details utting Width & Depth Spindle Speed Feedrate W=70mm 4,000,20, , , Tool Details utting Width & Depth Spindle Speed Feedrate Quantity W=70mm 7,000,960 2, ,000,452 5, Ø80mm 3.4 in. 3 tooth Ø80mm 3.4 in. 5 tooth 2.75 in. D=4mm 0.5 in. W=70mm 2.75 in. D=3mm 0. in. Ø25mm W=22mm 2 tooth D=6mm 0.98 in. Ø20mm 0.78 in. 4 tooth 0.86 in in. W=3mm 0. in. D=30mm.8 in. 5, ipm ipm 2, ipm 5, ipm Quantity UDrill Tap Tool Details Spindle Speed Feedrate Quantity ipm Feedrate Quantity Ø33mm,200 S45 Ø33mm,200 P3.5 S45 P in..29 in. M30 M ipm 6.53 ipm.8 ipm Option Ø80mm 3.4 in. 3 tooth Ø80mm 3.4 in. 5 tooth 2.75 in. D=4mm 0.5 in. W=70mm 2.75 in. D=2mm 0.07 in. Ø25mm W=22mm 2 tooth D=6mm 0.98 in. Ø20mm 0.78 in. 4 tooth 0.86 in in. W=3mm 0. in. D=30mm.8 in. 5, ipm, ipm 20, ipm 5, ipm UDrill Tap Tool Details Spindle Speed Ø30mm, ipm S45 Ø27mm, ipm P S45 P in..06 in. M36 M ipm.8 ipm

9 Smooth hip Removal hip flush hip flush hip flow Spiral chip conveyor Spiral chip conveyor Lift-up chip conveyor Option Table Top View Ø300 mm Ø.8 in. Units: mm in T8 groove details Ø Section 4 positions : JIS grade Section 4 positions : JIS grade 2 Ø T4 groove details 8 Section 4 positions : JIS grade Ø Section 4 positions : JIS grade T4 groove details T8 groove details Spindle Stroke Diagram Units: mm in. X-axis stroke Y-axis stroke Y-axis stroke Ø Z-axis stroke Z-axis stroke H350 Ø520 Ø Spindle stroke range Spindle stroke range H.8 H Ø520 Ø20.47 Z-axis stroke H350 Spindle stroke range Ø enter hole details enter hole details Ø9 Ø4.68 Ø50 Ø Table Top View Ø500mm Ø9.68 in. Option Units: mm in Ø9 Ø4.68 Ø50 Ø Option H350 H.8 * Table size: Ø300 mm Ø.8 in., X-axis 0 to ｰ560 mm in. 9

10 Standard Machine Specifications Unitsmm in. Movement and Ranges Power Sources X-Axis Travel mm (in.) 630(24.80) Power apasity kva Volume of ompressed Air Y-Axis Travel mm (in.) 560(22.04) Z-Axis Travel mm (in.) 5(20.07) A-Axis Travel -Axis Travel deg deg Table Working Surface mm (in.) Ø300(Ø.8) Loading apacity kg (lb.) 200(440) Max. Work Size mm (in.) Spindle Spindle Speed Range min - 402,000 Spindle earing Lubrication Grease Spindle Drive Motor (ontin. / 30min) kw 7.5 / Max. Spindle Torque Nm 20 (880min - ) Feedrate Rapid Traverse Rate (X/Y/Z) mm/min(ipm) 40,000(,574.80) Rapid Traverse Rate (A) min - 7 Rapid Traverse Rate () min - 33 Feedrate (X/Y/Z) mm/min(ipm) 40,000(,574.80) Feedrate (A) min - 7 Feedrate () min - 33 Automatic Tool hanger Type of Tool Shank JIS T Tool Storage apacity pcs 60(chain magazine) Max. Tool Diameter mm (in.) Max. Tool Length mm (in.) 300(.8) Max. Tool Mass kg (lb.) (22) Tool hanging Time(tool to tool) sec..2 Ø520H350(Ø20.47H3.77) Ø80(Ø3.4)with adjacent tools Ø50(Ø5.90)without adjacent tools Tank apacity oolant Tank apacity N System ontrol System 44 NL/min 300 L 560 Matsuura G-Tech 3i Standard Accessories 0Total Splash Guard 02AT Auto Door 03Synchronized Tapping 04AD-TAP Function 05IP Function 06Spindle Oil ooler 07Auto Grease Supply Unit 08Spindle Overload Protect 09hipFlush Machine olor Paint Work Light 2Standard Mechanical Tools & Tool box 3Leveling Pads & olts (Not utilized for the foundation) 4ScaleFeedback for the A/ Axis 5MIMS (without Thermal Meister 6Intelligent Protection System 7Matsuura Safety Specification External View Units: mm in (Y-axis stroke) (A-axis stroke) 25 (Z-axis stroke) (X-axis stroke)

11 Optional Specifications & Equipment StandardOptionUnitsmm in. Spindle 2,000 min - (T40 Grease Lubrication) 2,000 min - Torque Up Type (T40, Grease Lubrication) Spindle Drive Motor kw 7.5/ Max. Spindle Torque Nm 67 20,000 min - (T40 Auto Grease Lubrication) Spindle Drive Motor kw /5/8.5 Max. Spindle Torque Nm 8.4 Table Ø300(Ø.8) Ø500(Ø9.68) High Accuracy ontrol Scale Feedback XYZ-Axis A-Axis -Axis Spindle Thermal Displacement ompensation 2K #40 S-ode Type Spindle Thermal Displacement ompensation 20K #40 Temperature Monitor Type oolant oolant Tank Unit Vacuum Type oolant-thru-spindle Type A (7MPa) Vacuum Type oolant-thru-spindle Type A (4MPa) Vacuum Type oolant-thru-spindle Type (7MPa) Vacuum Type oolant-thru-spindle Type (4MPa) Vacuum Type oolant-thru-spindle Type (2MPa) Vacuum Type oolant-thru-spindle Type (7MPa) oolant Temperature ontroller With 0-liter Tank (Separately Installed, Small Size) hip Removal Total Splash Guard AT Auto Door hip Flush System Spiral hip onveyor Lift-Up hip onveyor (Scraper) hip ucket Floor Plan Air low For hip Removal Workpiece leaning Gun (Machine side) Operation/Maintenance Support Reliability Meister Plus AD-TAP Function IP Function Type A (With P) Type (Without P) Auto Grease Supply Unit for Feed Axes Work Light Movable Manual Pulse Generator Additional Eight M Functions Spindle Load Monitoring Function Weekly Timer Spindle Run Hour Meter Rotary Wiper (air driven) Rotary Wiper (electrically driven) Automatic Operation Run Hour Meter 0 VA Socket (3A) Optional lock Skip 29 3-olor Signal Light (red, yellow, green from top) TRUE PATH (by AMPLETE) Machine Module Pressure Supply System for Fixtures Safety Devices Matsuura Safety Specification Automatic Measurement, Tool reakage Detection Automatic Measurement / Automatic Alignment (Optical) Tool reakage / Full Automatic Tool Length Measurement (Laser) Automatic Measurement (Optical) & Tool reakage (Laser) Option Package Hi-Speed Hi-Precision Package 5-Axis Package Hi-Speed Hi-Precision / 5-Axis Package Value Package Hi-Speed Hi-Precision / 5-Axis Package + TRUE PATH Units: mm in. Leveling bolt Air supply port hain magazine with 60 tools oolant tank capacity Main operation panel Oil cooler Power supply port

12 URL : webmaster@matsuura.co.jp MATSUURA MAHINERY ORPORATION - Urushihara-cho Fukui ity , Japan TEL : FAX : MATSUURA EUROPE GmbH erta-ramer-ring 2 D Wiesbaden-Delkenheim, Germany TEL : FAX : URL : info@matsuura.de MATSUURA MAHINERY Ltd. Gee Road, Whitwick usiness Park, oalville Leicestershire, LE67 4NH, England TEL : FAX : URL : sales@matsuura.co.uk Facebook : MATSUURA MAHINERY GmbH erta-ramer-ring 2 D Wiesbaden-Delkenheim, Germany TEL : FAX : URL : info@matsuura.de ELLIOTT MATSUURA ANADA IN. 220 uckingham Road Oakville Ontario L6H 5X2, anada TEL : FAX : URL : sales@elliotmachinery.com MATSUURA MAHINERY USA, IN. 325 Randolph Ave., St.Paul, MN 552 TEL : URL : info@matsuurausa.com Product specifications and dimensions are subject to change without prior notice. The photos may show optional accessories. Products are subject to all applicable export control laws and regulations. FI0-E NM

MX Axis Vertical Machining Center

MX Axis Vertical Machining Center MX-520 5-Axis Vertical Machining enter For a smooth Transition To -Axis Machining Excellent operability 60-tool hain Magazine The MX-520 heralds a new era in 5 axis machining for 3 axis users making the