AMPMODU Headers and Receptacles,.100 [2.54] Centerline

Transcription

1 MPMODU.02 [0.64] Square Interconnection System MPMODU Headers and Receptacles, enterline SR VT-RET SR VT DR Stacking Header SR Top Entry ulkhead Header SR Top Entry SR VT DR VT DR VT DR VT-RET DR Top Entry DR P DR R SR P DR R SR R DR HORZ Legend: SR Single Row DR Double Row VT Vertical R Right ngle RET Retention Feature P TION PIN E ottom Entry 3/4 3-Sided-Shrouded Header reakaway TR Triple Row SMT Surface Mount HORZ Horizontal DE Dual Entry DR R-RET SR HORZ DR P DR Outrigger DE SR R-RET SR R DR VT DR R SR VT DR Top Entry SR ottom Entry /4 DR R SR R MPMODU Interconnection System For drawings, technical data or samples, contact your Tyco Electronics sales engineer or call the Tyco Electronics Product Information enter:

2 MPMODU.02 [0.64] Square Interconnection System (ontinued) MPMODU Headers and Receptacles, enterline SR Stacking Header SR VT SMT DR VT SMT SR Outrigger DE DR DE SR HOR2 SMT TR VT MPMODU Interconnection System Sq. ontinuous Post Legend: SR Single Row DR Double Row VT Vertical R Right ngle RET Retention Feature P TION PIN E ottom Entry 3/4 3-Sided-Shrouded Header reakaway TR Triple Row SMT Surface Mount HORZ Horizontal DE Dual Entry Sq. ontinuous Post SR HORZ SMT DR VT SMT DE SR VT SMT DE For drawings, technical data or samples, contact your Tyco Electronics sales engineer or call the Tyco Electronics Product Information enter:

3 MPMODU.02 [0.64] Square Interconnection System The MPMODU interconnection system provides interconnections with a unique modular concept, utilizing precision formed receptacle contacts and mating posts. Mating of the post and receptacle contacts of this system is very tolerant. This is made possible by a post with a burr-free lead-in and a receptacle contact featuring double cantilever beams and antioverstress stops. MPMODU receptacle contacts and posts categorically fall into three general classifications of products, which include: board mounted posts and receptacle assemblies, post headers and wire-applied contact housings for crimp snap-in pin and receptacle contacts. Receptacle ontacts oard mounted receptacle assemblies are available in various geometries, offering packaging interconnections that include perpendicular, parallel and stacking capabilities. rimp snap-in pins for WG [ mm 2 ] wire and crimp snap-in receptacles for WG [ mm 2 ] wire provide excellent discrete wire terminations. Housings for these contacts provide ease of handling terminations in high density applications. Machine applied terminations, through matched application equipment, are geared for virtually any production volume requirement, for the lowest possible applied cost. Terms Explained The MPMODU receptacle cross-section is primarily rectangular, with rounded corners. Two integral cantilever beams contact the mating square or round male posts. Deflection of these spring members is limited by anti-overstress stops, and excessive permanent deformation is prevented. This feature allows a wide range for tolerance of misalignment of mating contacts. MPMODU mating posts are supplied typically as headers. They are available in various populations to meet the interconnection and packaging requirements of most systems. However, in instances where packaging configurations do not lend themselves to the economies of headers, Tyco Electronics can provide application equipment for the discrete location of individual posts. Looking at the electronic industry's standard levels of packaging, the MPMODU.02 [0.64] square interconnection system is primarily used in levels three and four. In level three it is used as a connection between two or more printed circuits. mother/daughter board connection is typical. In The configuration of the receptacle completely encloses the spring members preventing damage during handling and assembly and makes the system compatible with automatic application techniques. Note: pplication of a contact lubricant is part of the manufacturing process of all MPMODU tin-plated crimp products. However, it is not part of the manufacturing process of products that customers will solder, then clean. For these products, Tyco Electronics recommends that customers use contact lubricant. See the Tyco Electronics web page for further information. level four it is used as a connection between two subassemblies, such as a power supply and an associated subassembly. It is also important to note this product can serve as an interconnection in more than one level, depending on the application. The.02 [0.64] square interconnection system offers the most complete line of post/receptacle packaging products available today. This system, rated at 3 amperes per contact, has been used by almost every industry and marketplace over the last decade and is one of the oldest, most versatile and reliable interconnection systems employing.02 [0.64] square packaging technology. Wire rimp arrel Rugged selfsupporting one-piece contact body Wire entry for post to receptacle misalignment Insulation Support arrel Reliability dual cantilever spring contact design and built-in anti-overstress Offers standard, intermediate and high pressure contact forces antilever eams Wide Misalignment Tolerance MPMODU.02 Square Interconnection System Receptacle-losed Entry Housing Design The closed entry housing style better eliminates the chance of a mating post stubbing on the edges of the receptacle contact. ontact edges enclosed in plastic ontact edges enclosed in plastic losed Entry ccess Way nti-overstress Metallic post stop 87

4 Wire-to-oard, enterline Products Wire Sizes Wire Size WG [mm 2 ] Product Family Locking lip, Mod. IV, IV.v, V, MT, Short Point Locking lip, Mod. IV, IV.v, V, MTE, MT, Short Point Mod. IV, IV.v, V, Short Point ontact Platings Platings [ ] Gold [ ] Gold [ ] Gold Tin Product Family Mod. IV, IV.v, V, MTE, MT, Short Point Locking lip, Mod. IV, IV.v, V, MTE, MT, Short Point Locking lip, Mod. IV, IV.v, V, MT Locking lip, Mod. IV, IV.v, V, MTE, MT, Short Point Wire-to-oard Products Mating Post Lengths pplication Tooling Post Lengths Product Family [ ] Mod. IV (.600 [1.24] Profile Height) [ ] Mod. IV.v (.600 [1.24] Profile Height) [ ] Mod. V (.600 [1.24] Profile Height) [ ] Mod. IV (.64 [16.38] Profile Height) [ ] Mod. IV.v (.64 [16.38] Profile Height) [ ] Mod. V (.64 [16.38] Profile Height) [ ] MT ssembly with Standard Pressure ontacts [ ] MT ssembly with High Pressure ontacts [ ] MTE ssembly [ ] Short Point onnector ssembly [ ] Locking lip (onnector ssembly) [ ] Locking lip (Single ontact) pplication Tooling Description Product Family Mod. IV, Locking Short IV.v, V MT lip MTE Point Level V Manual Hand Tools (Wire rimp) Manual Hand Tools (ID) MP-O-MTI Stripper/rimper Machines with pplicator HMPOMTOR Model 2. Machine HMPOMTOR Model 3 Machine MP-O-LETRI Machines with pplicator Pneumatic Hand Tools ID Electric Power Unit Tube-Fed Ribbon able Machine MPOMTOR LS Machines Discrete Wire Machine Manual rbor Tool Pneumatic rbor Tool 88

5 oard-to-oard Solutions Guide, enterline Products Single-Row Single-Row Double-Row Double-Row Problem or oncern Tyco Electronics' Vertical Headers Right-ngle Headers, Vertical Headers Right-ngle Headers, Potential Solution and Receptacles Horizontal Receptacles and Receptacles Horizontal Receptacles (Page Ref.) (Page Ref.) (Page Ref.) (Page Ref.) Headers Float Off oard Soldering Operation Header ontacts Damaged During Manufacturing Operation or In-Field Use HEDERS Retention Feature: Unshrouded Shrouded 104, , 200 Shrouded HEDERS: Standard Profile Press-Fit TION PIN POST HEDERS: Unshrouded Shrouded 148, 149, 199 Machine pplied Posts 163, 164 oard/ackplane Requires Surface-Mount ompatible Thru-Hole: High Temperature Surface- HEDERS: Mount ompatibility Unshrouded 102* 103* 104* 10* Shrouded 130*, 137* 138* (Low Profile) REEPTLES 196* 19* Surface-Mount: HEDERS 109* 110 REEPTLES 187, pplication Requires oard Two-Piece Family: w/guide Posts: Guidance, Polarization and/or HEDERS 198, lind-mate apability REEPTLES 196* 19* Mod IV Low Profile REEPTLES: Reduction in Parallel TOP ENTRY: oard-to-oard Stack Height Thru-Hole , 180* Necessary (Refer to Parallel Surface-Mount Stack Guide on Page 62.) OTTOM ENTRY: Thru-Hole 177 Surface-Mount DUL ENTRY Thru-Hole Surface Mount 187, Soldering Problems with REEPTLES: Thru-Hole ottom Entry ottom Entry Receptacles (Must Mask Post Holes in oard During Outrigger (Separate Holes for Soldering Operation) Receptacle Leads and Mating Leads) End-to-End Stackable: HEDERS (Unshrouded): pplication Requires Thru-Hole 93, , 9, 103* 96, 97, 104* onnectors to be End-to-End Thru-Hole* 102* 103* 104* 108* Stackable on Grid Surface-Mount 109* 110* REEPTLES: Thru-Hole 17, 177, 178, * 176, 179, 180*, 182*, 183, Surface Mount , *High temperature compatible version, refer to page ref. listed. Wire-to-oard Solutions Guide, enterline Products enterline Products ustomer Requirement Tyco Electronics' Potential Solution atalog Page(s) Mod IV Polarized Housing 220 pplication Requires MTE Latched Receptacle and Header 230, 231, Guidance, Polarization MT with Polarizing overs Short Point Polarized Housing 224 Wire-to-Wire pplication Mod IV Receptacle ontacts and Pins Wire-to-Wire pplication (Latched) MTE Latched Receptacle and Shrouded Pin ssembly 230, 231, 236, 237 Wire-to-Wire pplication (Through Panel) MTE Panel Mount 242 High Vibration and Shock pplications Locking lip ontacts and Housings Printed ircuit oard Polarization MTE Header with P oard Orientation Peg 248, 249 oard Requires Surface Mount apability MTE Surface Mount Headers 21, 22 MTE High Temperature ompatible Headers 249, 20 Need to mate to MP-LTH Eject Headers Mod IV Ejection Housing 220 Need to Minimize Strain to able MT with Eject overs Mod IV Housing with Strain Relief 218, 219 pplication Requires Self-Retaining ontacts Locking lip ontacts 207, 298 Header Secured to oard During/Prior to Soldering MTE Headers with Post Retention or Holddowns Mate to Unshrouded Header Mod IV plain Housing with Mod V ontacts 213, 214, 216 with Retention Requirements MTE with High Pressure ontacts 234, 23 Multiple ables to be ommon to One Header MTE oupling Shroud, Double- or Single-Row 240, 241 Right-ngle able Dress MT with Hermaphroditic overs 229, 26, 27, 29 pplication Requires rimp ontacts and MTE Housings Short Point ontacts 222 Housings and End-to-End and Side-to-Side Stackable Short Point Double-Row Housing, MTE Plain Housing 223, 228, 229 onnector Must Mate to Post Lengths of.169 [4.29] Min. Short Point ontacts

6 Mating Post Selection Guide The following selection guide is provided to help in choosing a mating product after a receptacle, header or post has been selected. In some instances references are given on the catalog page to specific mating connectors. In other instances the reader is referred here to the selection guide for mating product recommendations. If your application requirement is not answered here, consult Tyco Electronics for further recommendations. Posts Without Shoulders For drawn wire products (ie, MPMODU reakaway and Low Profile Headers) and for products having the shoulder of the post below the housing or pc board surface (ie, MPMODU MTE and Single Row Shrouded Headers) the effective mating length starts at the housing or pc board surface. Effective Mating Length Posts With Shoulders For product having the shoulder of the post extending above the housing or pc board surface (ie, Standard MPMODU Shrouded and Unshrouded Headers) the effective mating length starts at the top of the shoulder. Effective Mating Length Mating Post Selection Guide Receptacle Type Recommended Effective Mating Posts Lengths Minimum Maximum MPMODU Mod II Horizontal oard Mount Receptacle, Single and Double Row, Short.230 [.84].280 [7.11] Point-of-ontact pages 169, 170, 172, 173 MPMODU Mod II Vertical oard Mount Receptacle, Single Row, Standard Profile,.183 [4.6].330 [8.38] Top Entry page 17 MPMODU Mod II Vertical oard Mount Receptacle, Standard Profile, Double Row, Top Entry,.183 [4.6].330 [8.38] 100 x mt. page 176 MPMODU Mod IV Vertical oard Mount Receptacle, Low Profile, Single Row, Top Entry, Single Tine.183 [4.6].2 [6.48] page 178 MPMODU Mod IV Vertical oard Mount Receptacle, Low Profile, Single Row, ottom Entry.280 [7.11] * page 177 MPMODU Mod IV Vertical oard Mount Receptacle, Low Profile, Double Row, Top Entry.183 [4.6].2 [6.48] pages 179, 180 MPMODU Surface-Mount Receptacle, Top Entry.183 [4.6] * Vertical oard Mount, Single Row, Dual Entry page 187, 188 ottom Entry.204 [.18] * MPMODU Mod IV Vertical oard Mount Receptacle, Low Top Entry.183 [4.6] * Profile, Double Row, Dual Entry page 182 ottom Entry.204 [.18] * MPMODU Surface-Mount Receptacle, Top Entry.183 [4.6] * Vertical oard Mount, Double Row, Dual Entry page ottom Entry.204 [.18] * MPMODU.600 [1.24] Mod IV Housing with Standard Pressure ontacts.210 [.33].283 [7.19] pages MPMODU.600 [1.24] Mod IV Housing with Intermediate Pressure ontacts.20 [.21].283 [7.19] pages MPMODU.600 [1.24] Mod IV Housing with High Pressure ontacts.18 [4.70].283 [7.19] pages MPMODU Mod IV Vertical oard Mount Receptacle, Low Top Entry.183 [4.6] * Profile, Single Row, Dual Entry page 181 ottom Entry.204 [.18] * Receptacle Type Recommended Effective Mating Posts Lengths Minimum Maximum Short Point Housing with ontacts pages [4.29].29 [6.8] MPMODU MTE Unloaded Housing with Short Point ontacts pages 222, 229, 231, [4.29].29 [6.8] MPMODU MTE ID ssemblies.200 [.08].20 [6.3] MPMODU MT ID ssembly with Standard Pressure ontacts page [.64].273 [6.93] MPMODU MT ID ssembly with High Pressure ontacts page [.08].273 [6.93] Locking lip Housing with ontacts pages [6.93].30 [8.89] Locking lip ontact without Housing page [.08].277 [7.04] Flexible Flat onductor able Single Row.267 [6.78].323 [8.20] Receptacle with Round Wire rimp High Pressure ontact atalog Double Row.282 [7.16].323 [8.20] Flexible Flat onductor able Receptacle with Multiple Wire Single Row.210 [.33].323 [8.20] rimp High Pressure ontact atalog Double Row.22 [.72].323 [8.20] Flexible Flat onductor able Single Row.267 [6.78].323 [8.20] Receptacle with Round Wire rimp Standard Pressure ontact atalog Double Row.282 [7.16].323 [8.20] Flexible Flat onductor able Receptacle with Multiple rimp Single Row.220 [.9].323 [8.20] Standard Pressure ontact atalog Double Row.23 [.97].323 [8.20] *Maximum post length is determined by customer s application; (i.e., available space beyond rear of horizontal receptacle assembly, or above bottom entry vertical receptacle assembly or below vertical receptacle assemblies used in pass through applications). 90

7 Parallel Stacking Guide for oard-to-oard pplications See Dimension Product Family Figure etween Headers elow P oards (See Note 1.) Single-Row (Page Ref.) Double-Row (Page Ref.) Product Family Receptacles Single-Row (Page Ref.) Double-Row (Page Ref.).060 [1.2] andolier Posts 163 N Dual Entry, Mod IV 177, 181, 187, , [2.29] reakaway** (Unshrouded) 102** 104** Dual Entry, Mod IV 177, 181, 187, , [3.89] Surface Mount** N 110 Dual Entry, Mod IV 177, 181, , reakaway (Unshrouded) 187, [6.73] andolier Posts ** Top Entry, Mod IV 178, , 180, 187, , [9.02] reakaway** (Unshrouded) 102** 104** Top Entry, Mod IV 178, , , 180, , [9.78] Low Profile Shrouded N 13, 137** Top Entry, Mod IV N 179, [1.06] Surface Mount** reakaway (Unshrouded) Surface Mount**, Mod IV, Top Entry 187, *.430 [10.92] reakaway** (Unshrouded) 102** 104** Top Entry, Mod II *.440 [11.18] Shrouded, Mod II 11, , 119 Top Entry, Mod II or Mod IV 17, , 179, [13.41] Stacking Shroud (See Note 2.) N 16 (Hood) Inner oard Receptacle (See Note 2.) N [13.89] Stacking Shroud (See Note 2.) N 160 Outer oard Receptacle (See Note 2.) N [13.97] Two-Piece Header onnector System N 198, 199 Two-Piece Receptacle** onnector System N 196**.748 [19.00] Stacking Shroud (See Note 2.) N 16 (Hood) Inner oard Receptacle (See Note 2.) N [19.1] Stacking Shroud (See Note 2.) N 161 Outer oard Receptacle (See Note 2.) N 18 Various Stacking Unshrouded Mod II/IV Receptacles, Top/ottom Entry Various Various **High temperature version available, see page ref. listed. Notes: 1. Headers listed are standard thru-hole versions. Many headers are available with retention feature and TION PIN posts. See product Notes: 1. specification pages in individual sections for option availability. Notes: 2. These headers and receptacles are Related oard-to-oard products. They are not part of the MPMODU.02 [0.64] Square Product Family. Parallel Stacking Guide oard-to-oard Stacking Heights (y Receptacle/Header ombination) Receptacle ssembly Receptacle ssembly Receptacle ssembly.26 [6.73].3 [9.02].26* [6.73].26 [6.73].418 [10.62].0* [13.97].090 [2.29] Header Header.090 [2.29].13 [3.89] Header Figure 1 Double-Row, Mod IV, ottom Entry, reakaway Header Figure 2 Double-Row, Mod IV, Top Entry, reakaway Header *Mod II Receptacle Height is.340 [8.64] for a total stack height of.430 [10.92] Figure 3 Double-Row, Mod IV, Surface-Mount, Top Entry, Receptacle and Surface-Mount reakaway Header Figure 4 Double-Row, Two-Piece Receptacle and Two-Piece Shrouded Header *Mod II Shrouded Header Height is.440 [11.18] for a total stack height of.440 [11.18] 91

8 Standard Headers Unshrouded Unshrouded Headers Product Facts Variety of popular sizes available Substantial time/labor savings install all posts at one time Vertical and right-angle versions available in single- and double-row configurations Triple-row version available in vertical configuration with.230 [.84] mating length opper alloy posts hoice of select gold or tin plated posts Mating length for single and double row is.318 [8.08] (.278 [7.06] effective mating length-see page 90) Flame retardant, black thermoplastic housings; 94V-0 rated Recognized under the omponent Program of Underwriters Laboratories Inc., R File No. E28476 ertified by anadian Standards R ssociation, File No. LR 7189 Performance haracteristics Electrical Insulation Resistance,000 megohms minimum initial Dielectric Withstanding Voltage 70 V rms at sea level Environmental Operating Temperature -6 to +10 (black thermoplastic housings) urrent 3 amperes maximum per contact (dependent upon mating connector) 92

9 Standard Headers Unshrouded, Single Row, enterline.02 [0.64] Square Straight Post.200 [.08] Ref. (ontact rea).318 [8.08].046/.038 [1.17/0.97].090 [2.29].12 [3.18] Housing lack thermoplastic, 94V-0 rated Posts opper alloy, plated as follows: Plating Selectively plated [ ] gold on contact area, with gold flash over [ ] nickel on entire post Plating Selectively plated [ ] gold on contact area, with gold flash over [ ] nickel on entire post Tin/Nickel Plating option available; minimum order quantities may apply. onsult Tyco Electronics. Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 Technical Documents page 276 See mating connector for applicable product and application specifications. Note: ll part numbers are RoHS compliant..042 [1.07] *.03±.003 [0.89±0.08] Dia. Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..00 Max. [1.27] No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [2.13] [4.67] [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [30.07] 1 [27.94] [32.61] [30.48] [3.1] [33.02] [37.69] [3.6] [40.23] 1.00 [38.10] [42.77] [40.64] [4.31] [43.18] [47.8] [4.72] [0.39] [48.26] [2.93] [0.80] [.47] 2 [3.34] [8.01] [.88] [60.] [8.42] [63.09] [60.96] [6.63] 2.00 [63.0] [68.17] [66.04] [70.71] [68.8] [73.2] [71.12] [7.79] [73.66] [78.33] [76.20] [80.87] 3 [78.74] [83.41] [81.28] [8.9] [83.82] [88.49] [86.36] [91.03] 3.00 [88.90] [93.7] [91.44] [96.11] [93.98] [98.6] [96.2] [101.19] [99.06] Unshrouded Headers

10 Standard Headers Unshrouded, Single Row, enterline (ontinued).02 [0.64] Square Right-ngle Post.139 [3.3] Ref. Unshrouded Headers Housing lack thermoplastic, 94V-0 rated Posts opper alloy, plated as follows: Plating Selectively plated [ ] gold on contact area, with gold flash over [ ] nickel on entire post Plating Selectively plated [ ] gold on contact area, with gold flash over [ ] nickel on entire post Tin/Nickel Plating option available; minimum order quantities may apply. onsult Tyco Electronics. Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page [1.07] *.02 [0.64].138 [3.1] Ref..110 [2.79] Ref..02±.001 [0.63±0.03].069 [1.7].03±.003 Dia. [0.89±0.08].200 [.08] ontact rea.02 [0.64].318 [8.08] Ref..02±.002 [0.63±0.0].040 [1.02] Ref..069 [1.7].17 [3.99] Technical Documents page 276 See mating connector for applicable product and application specifications. Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [2.13] [4.67] [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [30.07] 1 [27.94] [32.61] [30.48] [3.1] [33.02] [37.69] [3.6] [40.23] 1.00 [38.10] [42.77] [40.64] [4.31] [43.18] [47.8] [4.72] [0.39] [48.26]

11 Standard Headers Unshrouded, Single Row, enterline (ontinued) No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [2.93] [0.80] [.47] 2 [3.34] [8.01] [.88] [ [8.42] [63.09] [60.96] [6.63] 2.00 [63.0] [68.17] [66.04] [70.71] [68.8] [73.2] [71.12] [7.79] [73.66] [78.33] [76.20] [80.87] 3 [78.74] [83.41] [81.28] [8.9] [83.82] [88.49] [86.36] [91.03] 3.00 [88.90] [93.7] [91.44] [96.11] [93.98] [98.6] [96.2] [101.19] [99.06] Unshrouded Headers 9

12 Standard Headers Unshrouded, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post.200 [.08] Ref. (ontact rea).318 [8.08] Unshrouded Headers Housing lack thermoplastic, 94V-0 rated Posts opper alloy, plated as follows: Plating Selectively plated [ ] gold on contact area, with gold flash over [ ] nickel on entire post Plating Selectively plated [ ] gold on contact area, with gold flash over [ ] nickel on entire post Tin/Nickel Plating option available; minimum order quantities may apply. onsult Tyco Electronics. Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications..042 [1.07] * * Recommended P oard Hole Layout (for.0 [1.40] min. thick P board).03±.003 Dia. [0.89±0.08] *±.003 [±0.08] tolerances not to accumulate within one connector pattern..046/.038 [1.17/0.97].090 [2.29].12 [3.18].00 Max. [1.27] No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [2.13] [4.67] [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [30.07] 1 [27.94] [32.61] [30.48] [3.1] [33.02] [37.69] [3.6] [40.23] 1.00 [38.10] [42.77] [40.64] [4.31] [43.18] [47.8] [4.72] [0.39] [48.26]

13 Standard Headers Unshrouded, Double-Row, x [2.4 x 2.4] enterline (ontinued) No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [2.93] [0.80] [.47] 2 [3.34] [8.01] [.88] [60.] [8.42] [63.09] [60.96] [6.63] 2.00 [63.0] [68.17] [66.04] [70.71] [68.8] [73.2] [71.12] [7.79] [73.66] [78.33] [76.20] [80.87] 3 [78.74] [83.41] [81.28] [8.9] [83.82] [88.49] [86.36] [91.03] 3.00 [88.90] [93.7] [91.44] [96.11] [93.98] [98.6] [96.2] [101.19] [99.06] Unshrouded Headers 97

14 Standard Headers Unshrouded, Double-Row, x [2.4 x 2.4] enterline (ontinued).02 [0.64] Square Right-ngle Post.042 [1.07].200 [.08] Ref. (ontact rea).289 [7.34].042 [1.07].110 [2.79] Unshrouded Headers Housing lack thermoplastic, 94V-0 rated Posts opper alloy, plated as follows: Plating Selectively plated [ ] gold on contact area, with gold flash over [ ] nickel on entire post Plating Selectively plated [ ] gold on contact area, with gold flash over [ ] nickel on entire post Tin/Nickel Plating option available; minimum order quantities may apply. onsult Tyco Electronics. Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 Technical Documents page 276 See mating connector for applicable product and application specifications. * * Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..03±.003 Dia. [0.89±0.08].069 [1.7].318 [8.08].17 [3.99] No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [2.13] [4.67] [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [30.07] 1 [27.94] [32.61] [30.48] [3.1] [33.02] [37.69] [3.6] [40.23] 1.00 [38.10] [42.77] [40.64] [4.31] [43.18] [47.8] [4.72] [0.39] [48.26]

15 Standard Headers Unshrouded, Double-Row, x [2.4 x 2.4] enterline (ontinued) No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [2.93] [0.80] [.47] 2 [3.34] [8.01] [.88] [60.] [8.42] [63.09] [60.96] [6.63] 2.00 [63.0] [68.17] [66.04] [70.71] [68.8] [73.2] [71.12] [7.79] [73.66] [78.33] [76.20] [80.87] 3 [78.74] [83.41] [81.28] [8.9] [83.82] [88.49] [86.36] [91.03] 3.00 [88.90] [93.7] [91.44] [96.11] [93.98] [98.6] [96.2] [101.19] [99.06] Unshrouded Headers 99

16 Standard Headers Unshrouded, Triple-Row, enterline.02 [0.64] Square Straight Post.338 [8.9] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel.120 [3.0].042 [1.07].18 [4.70] Ref. (ontact rea).069 [1.7].230 [.84] Unshrouded Headers Technical Documents page 276 See mating connector for applicable product and application specifications. * *.120 [3.0].03±.003 Dia. [0.89±0.08] * Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Pos. Part Nos [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [3.1] [33.02] [37.69] [3.6] [0.39] [48.26] [8.01] [.88] [60.] [8.42] [80.87] 3 [78.74] [101.19] [99.06]

17 reakaway and Retention Headers Unshrouded Product Facts Design and inventory versatility headers can be broken into any size needed Variety of popular sizes available Substantial time/labor savings can install all posts at one time Vertical and right-angle versions available in single- and double-row configurations Phosphor bronze posts hoice of gold duplex or tin plated posts Post lengths include.230 [.84] and.318 [8.08] for connector mating oard retention feature available lack, glass-filled thermoplastic housings; high temperature compatible Recognized under the omponent Program of Underwriters Laboratories Inc., R File No. E28476 ertified by anadian Standards ssociation, R File No. LR 7189 Performance haracteristics Electrical Insulation Resistance,000 megohms minimum initial Dielectric Withstanding Voltage 70 V rms at sea level Environmental Operating Temperature -6 to +10 (black thermoplastic housings) urrent 3 amperes maximum per contact (dependent upon mating receptacle) reakaway and Retention Headers Unshrouded 101

18 reakaway Headers Unshrouded, Single-Row, enterline.02 [0.64] Square Straight Posts Headers with Solder Tails.02 [0.64] D E Ref. (ontact rea).090 [2.29] reakaway and Retention Headers-Unshrouded Housing lack thermoplastic, 94V-0 rated, high temperature compatible Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder tail, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder tail, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel Performance haracteristics (oard Retention Tails) Insertion Force 12 lb [3.4N] max. Retention Force.2 lb [1.11N] min. Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 Technical Documents page 276 See mating connector for applicable product and application specifications..03±.003 Dia. * [0.89±0.08] (Plated) Recommended Hole Size efore Plating.04±.001 Dia. [1.14±0.02] Recommended P oard Mounting Pattern (for.062 [1.7] thick P board;.008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Headers with oard Retention Tails.02 [0.64].040±.003 * Dia. [1.02±0.08] (Plated) Recommended Hole Size efore Plating.04±.001 Dia. [1.14±0.02].030±.002 [0.76±0.0].04 [1.14].090±.002 [2.29±0.0] Recommended P oard Mounting Pattern (for.062 [1.7] thick P board;.008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..030±.002 [0.76±0.0] (see note 3).04 [1.14] D.10±.002 [3.81±0.0] E Ref. (ontact rea).090 [2.29] =.090 [2.29] =.120 [3.0] =.12 [3.18] D =.230 [.84] D =.230 [.84] D =.318 [8.08] Header No. of Dimensions E =.18 [4.70] E =.18 [4.70] E =.200 [.08] Style Pos. Post Plating/Part Nos. Post Plating/Part Nos. Post Plating/Part Nos. Plating Plating Plating Plating Plating Plating Plating Plating Plating With 1 Solder Tails.084 [2.13] (See Notes 1 and 2.) [101.19] [99.06] With oard Retention Tails [7.21].200 [.08] (See Notes 2 and 3.) [101.19] [99.06] Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No (not shown). 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with oard Retention Tails). When ordering, add the prefix and/or suffix (dash) numbers plus - -0 to the base part number that corresponds with the desired size. For example, the complete part number for an 8-position header with solder tails ( dimension.090 [2.29], post plating ) would be The complete part number for a 26-position header with board retention tails ( dimension.120 [3.0], post plating ) would be This part numbering system applies only to this page. 3. For dimensions.120 [3.0] and.12 [3.18], board retention using kinked tails are for headers 6 positions and smaller; headers 7 positions and larger use swaged tails. Headers with a dimension of.090 [2.29] have swaged tails for all sizes. 102

19 reakaway Headers Unshrouded, Single-Row, enterline (ontinued).02 [0.64] Square Right-ngle Posts Headers with Solder Tails D.090 [2.29].138 [3.1] Housing lack thermoplastic, 94V-0 rated, high temperature compatible Posts Phosphor bronze, duplex plated [ ] gold on contact area, [ ] matte tin on solder tail, with entire post underplated [ ] nickel.042 [1.07] (2 Plc.).03±.003 Dia. [0.89±0.08] (Plated) Recommended Hole Size efore Plating.04±.001 Dia. [1.14±0.02] *.030±.002 [0.76±0.0].04 [1.14] E Ref. (ontact rea).090±.002 [2.29±0.0].140 [3.6] Performance haracteristics (oard Retention Tails) Insertion Force 12 lb [3.4N] max. Retention Force.2 lb [1.11N] min. Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 Technical Documents page 276 See mating connector for applicable product and application specifications. Recommended P oard Mounting Pattern (for.062 [1.7] thick P board;.008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Headers with oard Retention Tails.138 [3.1].042 [1.07] (2 Plc.).040±.003 Dia. [1.02±0.08] (Plated) Recommended Hole Size efore Plating.04±.001 Dia. [1.14±0.02] *.030±.002 [0.76±0.0].04 [1.14] D E Ref. (ontact rea).10±.002 [3.81±0.0].140 [3.6].090 [2.29] reakaway and Retention Headers-Unshrouded Recommended P oard Mounting Pattern (for.062 [1.7] thick P board;.008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. =.120 [3.0] =.110 [2.79] Header No. of Dimensions D =.230 [.84] D =.318 [8.08] Style Pos. E =.18 [4.70] E =.200 [.08] Part Nos. Part Nos. With Solder Tails [2.13] (See Notes 1 and 2.) [101.19] [99.06] With oard [2.13] Retention Tails (See Note 2.) [101.19] [99.06] oard Retention using Swaged Tails (ll Header Sizes) Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No (not shown). Notes: 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with oard Retention Tails). When ordering, add the prefix and/or suffix (dash) numbers plus - -0 to the base part number that corresponds with the number of positions. For example, the complete part number for an 8-position header with solder tails ( dimension.120 [3.0)] would be The complete part number for a 26-position header with board retention tails ( dimension.120 [3.0]) would be This part numbering system applies only to this page. 103

20 reakaway Headers Unshrouded, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Posts Headers with Solder Tails.192 [4.88].02 [0.64] D E Ref. (ontact rea).090 [2.29] reakaway and Retention Headers-Unshrouded Housing lack thermoplastic, 94V-0 rated, high temperature compatible Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder tail, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder tail, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel Performance haracteristics (oard Retention Tails) Insertion Force 12 lb [3.4N] max. Retention Force.2 lb [1.11N] min. Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 Technical Documents page 276 See mating connector for applicable product and application specifications. ( L of Hole Pattern) *.090±.002 [2.29±0.0].030±.002 [0.76±0.0].04 [1.14] Ref. Recommended P oard Mounting Pattern (for.062 [1.7] thick P board;.008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Headers with oard Retention Tails.02 [0.64] ( L of Hole Pattern) *.10± ±.002 [3.81±0.0] [0.76±0.0] Recommended P oard Mounting Pattern (for.062 [1.7] thick P board;.008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..110 [2.79] ( L of Stencil Pattern).03±.003 Dia. [0.89±0.08] (Plated) Recommended Hole Size efore Plating.04±.001 Dia. [1.14±0.02].07 [1.91] Ref..192 [4.88] D.170 [4.32] ( L of Stencil Pattern).040±.003 Dia. [1.02±0.08] (Plated) Recommended Hole Size efore Plating.04±.001 Dia. [1.14±0.02] E Ref. (ontact rea) =.090 [2.29] =.120 [3.0] =.12 [3.18] D =.230 [.84] D =.230 [.84] D =.318 [8.08] Header No. of Dimensions E =.18 [4.70] E =.18 [4.70] E =.200 [.08] Style Pos. Post Plating/Part Nos. Post Plating/Part Nos. Post Plating/Part Nos. Plating Plating Plating Plating Plating Plating Plating Plating Plating With 2 Solder Tails.084 [2.13] (See Notes 1 and 2.) [101.19] [99.06] With oard [2.13] Retention Tails (See Note 2.) [101.19] [99.06] [2.29] 104 Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No (not shown). 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus - -0 to the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16-position header with solder tails ( dimension.090 [2.29], post plating ) would be The complete part number for a 40-position header with board retention tails ( dimension.120 [3.0], post plating ) would be This part numbering system applies only to this page.

21 reakaway Headers Unshrouded, Double-Row, x [2.4 x 2.4] enterline (ontinued).02 [0.64] Square Right-ngle Posts Headers with Solder Tails.042 [1.07] (2 Plc.) D.090 [2.29].238 [6.0] Housing lack thermoplastic, 94V-0 rated, high temperature compatible Posts Phosphor bronze, duplex plated [ ] gold on contact area, [ ] tin on solder tail, with entire post underplated [ ] nickel Performance haracteristics (oard Retention Tails) Insertion Force 12 lb [3.4N] max. Retention Force.2 lb [1.11N] min. Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 Technical Documents page 276 See mating connector for applicable product and application specifications..090±.002 [2.29±0.0].030±.002 [0.76±0.0] E Ref. (ontact rea) Recommended P oard Mounting Pattern (for.062 [1.7] thick P board;.008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Headers with oard Retention Tails.042 [1.07] (2 Plc.) ( L of Hole Pattern).238 [6.0] * *.07 [1.91].04 [1.14] Ref..140 [3.6].110 [2.79] ( L of Stencil Pattern).03±.003 Dia. [0.89±0.08] (Plated) Recommended Hole Size efore Plating.04±.001 Dia. [1.14±0.02] D E Ref. (ontact rea).140 [3.6].170 [4.32] ( L of Stencil Pattern).040±.003 ( Dia. L of [1.02±0.08] Hole (Plated) Pattern).10± ±.002 Recommended Hole Size [3.81±0.0] [0.76±0.0] efore Plating.04±.001 Dia. [1.14±0.02] Recommended P oard Mounting Pattern (for.062 [1.7] thick P board;.008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..090 [2.29] reakaway and Retention Headers-Unshrouded =.120 [3.0] =.110 [2.79] Header No. of Dimensions D =.230 [.84] D =.318 [8.08] Style Pos. E =.18 [4.70] E =.200 [.08] Part Nos. Part Nos. With Solder Tails [2.13] (See Notes 1 and 2.) [101.19] [99.06] With oard [2.13] Retention Tails (See Note 2.) [101.19] [99.06] oard Retention using Swaged Tails (ll Header Sizes) Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No (not shown). Notes: 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus - -0 to the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16- position header with solder tails ( dimension.120 [3.0)] would be The complete part number for a 40-position header with board retention tails ( dimension.120 [3.0]) would be This part numbering system applies only to this page. 10

22 MPMODU Reeled reakaway Headers Features of reakaway Headers Design and inventory versatility headers can easily be made into a variety of sizes High Temperature ompatible Reduced part number base Reduced inventory burden pplications Desktops & workstations Set-top boxes Televisions utomotive instrument panels & radios Medical and test equipment Reeled reakaway Headers enefits Off the shelf availability Various header length capability using the same reel Reduction of inventory costs Economy version of the standard breakaway headers Tyco Electronics now offers MPMODU reeled breakaway headers, which are used for board-to-board interconnections, on a continuous reel. The reeled breakaway headers are an economy version of the standard breakaway headers, and continue to provide the same high quality standards that Tyco Electronics is known for in the connector industry. Reeled breakaway headers provide the flexibility to cut the headers to many different lengths, while only having to stock one part number. s a result, the amount of part numbers that need to be purchased and stored can be greatly reduced. Reeled breakaway headers can be purchased in single and double rows with tin, u, 1 u, and 30 u duplex plating. The lower applied cost also offers.230" and.318" mating lengths. (See standard breakaway-to-reeled header conversion chart for vertical headers on the reverse side of this sheet) Potential industries include: computer peripherals, telecommunications equipment, consumer, automotive, medical and test equipment. Tooling available from: Robo-Pak, Inc. 814 Lakeshore Drive East ethel, MN 902 pin retention and pin removal tooling option is also available in addition to cutting. 106

23 MPMODU Reeled reakaway Headers (ontinued) Single Row [99.06].092 [2.34].02±.001 [0.64±0.03].046±.003 [1.17±0.08].18 [4.70] (ontact rea).230 (1) [.84] ±.003 [2.4±0.08].02±.002 [0.64±0.0].110±.01 (1) [2.79±0.38].192 [4.88] Double Row.02±.001 [0.64±0.03] [99.06].046±.003 [1.17±0.08] Reeled reakaway Headers.18 [4.70] (ontact rea).230 (1) [.84] ±.003 [2.4±0.08].02±.002 [0.64±0.0].110±.01 (1) [2.79±0.38] (1) See table for other mate and tail lengths. Standard reakaway-to-reeled Header onversion hart (Vertical) Double Row Headers Single Row Headers Existing Make From Existing Make From Existing Make From Existing Make From Tyco Electronics P/N Reeled P/N Tyco Electronics P/N Reeled P/N Tyco Electronics P/N Reeled P/N Tyco Electronics P/N Reeled P/N Plating Mate:.318 Mate:.318 Mate:.230 Mate:.230 Mate:.318 Mate:.318 Mate:.230 Mate:.230 Options Tail:.12 Tail:.11 Tail:.120 Tail:.110 Tail:.12 Tail:.11 Tail:.120 Tail: Tin u Duplex u Duplex Note: Reeled Headers are a functional substitute for standard breakaways, however there are visual differences (i.e. housing appearance and bow due to reeling requirement). 107

24 PageHead_12_Helvdd reakaway Surface Mount (ontinued) Headers, x [2.4 x 2.4] enterline Surface Mount reakaway Headers Product Facts Surface Mount Leads ontact Material: phosphor bronze High temperature, black thermoplastic housings, 94V-0 rated, capable of withstanding IR or vaporphase reflow Recognized under the omponent Program of Underwriters Laboratories Inc. R File No. E28476 ertified by anadian Standards R ssociation, File No. LR 7189 hoice of gold duplex or tin plated posts Posts coplanar within.006 [0.1] Tape and reel packaging available in addition to single tube packaging. ontact Tyco Electronics. Pick-and-place cap available for vacuum placement. ontact Tyco Electronics. n extension of the MPMODU reakaway Header product family are the surface mount, vertical breakaway headers. The MPMODU Surface Mount breakaway headers (Unshrouded) are available in single- and double-row vertical configurations with mating lengths of.230 [.84] and.320 [8.13]. Posts are offered with a choice of either [.0007] gold duplex or tin plating. urrent packaging is in a single tube but tape and reel is available for automatic pick-and-place. We also can provide a pickand-place cap for vacuum placement if required. 108

25 PageHead_12_Helvdd reakaway Surface Mount (ontinued) Headers Unshrouded Single-Row, enterline.02 [0.64] Square Straight Post.092 [2.34] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel entire post Related Product Data Mateable Receptacle Refer to Mating Post Selection Guide page [2.67].24 [6.22].042 [1.07].02 [0.63].00±.003 [1.27±0.08] D Ref. (ontact rea).090 [2.29].140±.003 [3.6±0.08].192 [4.88].00 [1.27].063 [1.60] Surface Mount reakaway Headers Technical Documents page 276 See mating connector for applicable product and application specifications. Recommended Etched ircuit Layout (Using.008 [0.20] thick stencil) =.230 [.84] =.320 [8.13] No. of Dimensions D =.18 [4.70] D =.200 [.08] Pos. Post Plating/Part Nos. Post Plating/Part Nos. Plating Plating Plating Plating [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [30.07] 1 [27.94] [32.61] [30.48] [3.1] [33.02] [37.69] [3.6]

26 PageHead_12_Helvdd reakaway Surface Mount (ontinued) Headers Unshrouded Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post.192 [4.88] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel entire post.042 [1.07].140±.003 [3.6±0.08] D Ref. (ontact rea).02 [0.64].292 [7.42].00 [1.27].090 [2.29].063 [1.60] Surface Mount reakaway Headers Related Product Data Mateable Receptacles Refer to Mating Post Selection Guide page [8.76].20 [.21].06 [1.6] Recommended Etched ircuit Layout (Using.008 [0.20] thick stencil).00±.003 [1.27±0.08] =.230 [.84] =.320 [8.13] No. of Dimensions D =.18 [4.70] D =.200 [.08] Pos. Post Plating/Part Nos. Post Plating/Part Nos. Plating Plating Plating Plating [4.67] [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [30.07] 1 [27.94] [32.61] [30.48] [3.1] [33.02] [37.69] [3.6]

27 PageHead_12_Helvdd Unshrouded Stacking Headers reakaway (ontinued) x [2.4 x 2.4] enterline Product Facts vailable in single and double row Parallel P board stacking with numerous stack heights available Drawn wire posts allow 4 side mateability May eliminate the need for additional board spacers an be used in conjunction with bottom entry receptacles Gold or tin plated Up to [36.32] overall post length Retention and surface mount features available upon request Other header sizes can be made upon request Tape and reel packaging available. ontact Tyco Electronics. Pick-and-place cap available for vacuum placement. ontact Tyco Electronics. Unshrouded Stacking Headers reakaway 111

28 PageHead_12_Helvdd Unshrouded Stacking Headers (ontinued) reakaway, Single-Row, enterline.02 [0.64] Square Straight Posts Header Size No. of Pos. x.02±.001 [0.64±0.03].092 [2.34].046±.003 [1.17±0.08].090±.003 [2.29±0.08] Unshrouded Stacking Headers reakaway 112 Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating s noted in chart: Tin [ ] tin over [ ] nickel entire post 1u [ ] gold over [ ] nickel entire post Related Product Data Mateable Receptacles Refer to the Mating Post Selection Guide page 88 Technical Documents page 276 See mating connector for applicable product and application specifications. Retention and surface mount features available upon request. Other header sizes can be made upon request. *Note: Headers are available in sizes 1 thru 40. When ordering, add the prefix and/or suffix (dash) numbers plus - -0 to the base part number that corresponds with the number of positions per row. For example, the complete part number for an 8-position header is The complete part number for a 16-position of the same series would be D.042±.008 [1.07±0.20] 4 Places ±.003 [2.4±0.08] Tolerance Non-umulative.03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout ase D End D End Number Stack Tail Post Mating Plating Plating (see note) Height Length Length Length [.08].130 [3.30].440 [11.17].110 [2.79] TIN TIN [6.3].080 [2.03].440 [11.17].110 [2.79] TIN TIN [6.3].114 [2.89].474 [12.03].110 [2.79] TIN TIN [7.62].123 [3.12].33 [13.3].110 [2.79] TIN TIN [10.16].107 [2.71].617 [1.67].110 [2.79] TIN TIN [11.43].07 [1.4].617 [1.67].110 [2.79] TIN TIN [12.70].129 [3.27].739 [18.77].110 [2.79] TIN TIN [7.62].109 [2.77].739 [18.77].330 [8.38] TIN 1 U [1.24].107 [2.71].817 [20.7].110 [2.79] TIN TIN [10.16].087 [2.20].817 [20.7].330 [8.38] TIN 1 U [17.78].120 [3.0].930 [23.62].110 [2.79] TIN TIN [12.70].930 [23.62].330 [8.38] TIN 1 U [6.86].330 [8.38].930 [23.62].330 [8.38] 1 U 1 U [20.32].120 [3.0] [26.16].110 [2.79] TIN TIN [1.24] [26.16].330 [8.38] TIN 1 U [9.39].330 [8.38] [26.16].330 [8.38] 1 U 1 U [22.86].120 [3.0] [28.70].110 [2.79] TIN TIN [17.78] [28.70].330 [8.38] TIN 1 U [11.39].330 [8.38] [28.70].330 [8.38] 1 U 1 U [2.40].120 [3.0] [31.24].110 [2.79] TIN TIN [20.32] [31.24].330 [8.38] TIN 1 U [14.47].330 [8.38] [31.24].330 [8.38] 1 U 1 U [27.94].120 [3.0] [33.78].110 [2.79] TIN TIN [22.68] [33.78].330 [8.38] TIN 1 U [17.01].330 [8.38] [33.78].330 [8.38] 1 U 1 U [30.48].120 [3.0] [36.32].110 [2.79] TIN TIN [2.40] [36.32].330 [8.38] TIN 1 U [19.].330 [8.38] [36.32].330 [8.38] 1 U 1 U

29 PageHead_12_Helvdd Unshrouded Stacking Headers (ontinued) reakaway, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Posts Header Size No. of Pos. x.02±.001 [0.64±0.03].192 [4.88].046±.003 [1.17±0.08] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating s noted in chart: Tin [ ] tin over [ ] nickel entire post 1u [ ] gold over [ ] nickel entire post Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 Technical Documents page 276 See mating connector for applicable product and application specifications. Retention and surface mount features available upon request. Other header sizes can be made upon request. *Note: Headers are available in sizes 2 thru 80. When ordering, add the prefix and/or suffix (dash) numbers plus - -0 to the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16-position header is The complete part number for a 32-position of the same series would be ±.003 [2.29±0.08] D.042±.008 [1.07±0.20] 4 Places ±.003 [2.4±0.08] Tolerance Non-umulative.03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout ±.003 [2.4±0.08] ase D End D End Number Stack Tail Post Mating Plating Plating (see note) Height Length Length Length [.08].130 [3.30].440 [11.17].110 [2.79] TIN TIN [6.3].080 [2.03].440 [11.17].110 [2.79] TIN TIN [6.3].114 [2.89].474 [12.03].110 [2.79] TIN TIN [7.62].123 [3.12].33 [13.3].110 [2.79] TIN TIN [10.16].107 [2.71].617 [1.67].110 [2.79] TIN TIN [11.43].07 [1.4].617 [1.67].110 [2.79] TIN TIN [12.70].129 [3.27].739 [18.77].110 [2.79] TIN TIN [7.62].109 [2.77].739 [18.77].330 [8.38] TIN 1 U [1.24].107 [2.71].817 [20.7].110 [2.79] TIN TIN [10.16].087 [2.20].817 [20.7].330 [8.38] TIN 1 U [17.78].120 [3.0].930 [23.62].110 [2.79] TIN TIN [12.70].930 [23.62].330 [8.38] TIN 1 U [6.86].330 [8.38].930 [23.62].330 [8.38] 1 U 1 U [20.32].120 [3.0] [26.16].110 [2.79] TIN TIN [1.24] [26.16].330 [8.38] TIN 1 U [9.39].330 [8.38] [26.16].330 [8.38] 1 U 1 U [22.86].120 [3.0] [28.70].110 [2.79] TIN TIN [17.78] [28.70].330 [8.38] TIN 1 U [11.93].330 [8.38] [28.70].330 [8.38] 1 U 1 U [2.40].120 [3.0] [31.24].110 [2.79] TIN TIN [20.32] [31.24].330 [8.38] TIN 1 U [14.74].330 [8.38] [31.24].330 [8.38] 1 U 1 U [27.94].120 [3.0] [33.78].110 [2.79] TIN TIN [22.68] [33.78].330 [8.38] TIN 1 U [17.01].330 [8.38] [33.78].330 [8.38] 1 U 1 U [30.48].120 [3.0] [36.32].110 [2.79] TIN TIN [2.40] [36.32].330 [8.38] TIN 1 U [19.].330 [8.38] [36.32].330 [8.38] 1 U 1 U 113 Unshrouded Stacking Headers reakaway

30 PageHead_12_Helvdd Standard Profile Headers Shrouded (ontinued) Standard Profile Headers, Shrouded Product Facts vailable in several styles right-angle with three- and four-sided pin protection, and straight post with pin protection and mounting ears Post retention feature available an be used for feed-to and feed-thru applications Housings are black thermoplastic, flame retardant 94V-0 rated ontacts are copper alloy vailable in gold duplex, gold over nickel and tin over nickel platings Headers with.066 [1.68] and.10 [3.81] end dimensions are available in select sizes up to 60 positions an be select loaded, consult Tyco Electronics Recognized under the omponent Program of Underwriters Laboratories Inc. R File No. E28476 ertified by anadian Standards R ssociation, File No. LR 7189 Performance haracteristics Electrical Insulation Resistance,000 megohms minimum initial Dielectric Withstanding Voltage 70 RMS at sea level Environmental Operating Temperature -6 to +10 (black thermoplastic housings) urrent 3 amperes maximum per contact 114

31 PageHead_12_Helvdd Standard Profile Headers Shrouded, (ontinued) Single-Row, enterline.02 [0.64] Square Straight Post (with Standoffs).49 [13.94] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post Related Product Data Mateable onnectors MPMODU Wire-pplied Receptacles page 21 MPMODU MTE Receptacles pages 228, 229, 234 Technical Documents page 276 See mating connector for applicable product and application specifications..134 [3.40].110 [2.79].013 [0.33] (Standoffs).070 [1.78] *.03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..214 [.44].040 [1.02].200 [.08] Ref. (ontact rea).240 [6.10].330 [8.38].219 [.6] No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating Plating [10.67].340 [8.64].200 [.08] [13.21].440 [11.18].300 [7.62] [1.7].40 [13.72].400 [10.16] [18.29].640 [16.26].00 [12.70] [20.83].740 [18.80].600 [1.24] [23.37].840 [21.34].700 [17.78] [2.91].940 [23.88].800 [20.32] [28.4] [26.42].900 [22.86] [30.99] [28.96] [2.40] [33.3] [31.0] 1 [27.94] [36.07] [34.04] [30.48] [38.61] [36.8] [33.02] [41.1] 1.40 [39.12] [3.6] [43.69] [41.66] 1.00 [38.10] [46.23] [44.20] [40.64] [48.77] [46.74] [43.18] [1.31] [49.28] [4.72] [3.8] [1.82] [48.26] [6.39] [4.36] [0.80] [8.93] [6.90] 2 [3.34] [61.47] [9.44] [.88] [64.01] [61.98] [8.42] [66.] 2.40 [64.2] [60.96] [3.30] Standard Profile Headers, Shrouded 11

32 PageHead_12_Helvdd Standard Profile Headers Shrouded, (ontinued) Single-Row, enterline (ontinued).02 [0.64] Square Right-ngle Post (with Standoffs).49 [13.94] Standard Profile Headers, Shrouded No. Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post Related Product Data Mateable onnectors MPMODU Wire-pplied Receptacles page 21 MPMODU MTE Receptacles pages 228, 229, 234 Technical Documents page 276 See mating connector for applicable product and application specifications..214 [.44].134 [3.40].03±.003 [0.89±0.08] Dia..070 [1.78].013 [0.33] (Standoffs) *.040 [1.02].200 [.08] Ref. (ontact rea).240 [6.10].330 [8.38].11 [3.84] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..219 [.6] of Dimensions Post Plating/Part Nos. Pos. Plating Plating Plating [10.67].340 [8.64].200 [.08] [13.21].440 [11.18].300 [7.62] [1.7].40 [13.72].400 [10.16] [18.29].640 [16.26].00 [12.70] [20.83].740 [18.80].600 [1.24] [23.37].840 [21.34].700 [17.78] [2.91].940 [23.88].800 [20.32] [28.4] [26.42].900 [22.86] [30.99] [28.96] [2.40] [33.3] [31.0] 1 [27.94] [36.07] [34.04] [30.48] [38.61] [36.8] [33.02] [41.1] 1.40 [39.12] [3.6] [43.69] [41.66] 1.00 [38.10] [46.23] [44.20] [40.64] [48.77] [46.74] [43.18] [1.31] [49.28] [4.72] [3.8] [1.82] [48.26] [6.39] [4.36] [0.80] [8.93] [6.90] 2 [3.34] [61.47] [9.44] [.88] [64.01] [61.98] [8.42] [66.] 2.40 [64.2] [60.96] [2.79] 116

33 PageHead_12_Helvdd Standard Profile Headers Shrouded, (ontinued) with.066 [1.68] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post (with Detent Windows).040 [1.02] (3 Plc.) [1.68] [8.08].200 (2 Plc.).12 [.08] Ref. [3.18] (ontact rea).400 [10.16].280 [7.11] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post Related Product Data Mateable onnectors MPMODU oard Mount Receptacles pages 176, 179, 180 MPMODU Wire-pplied Receptacles pages MPMODU MTE Receptacles pages 228, 229, 234 MPMODU MT Receptacles pages 26, 27 ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications. D.440 [11.18] * E.03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board).240 [6.10] *±.003 [±0.08] tolerances not to accumulate within one connector pattern..080 [2.03].090 [2.29] (2 Plc.) *.090 [2.29] No. of Dimensions Post Plating/Part Nos. Pos. D E Plating Plating Plating [10.46].332 [8.43].200 [.08].106 [2.69] [13.00].432 [10.97].300 [7.62].106 [2.69] [1.4].32 [13.1].400 [10.16].206 [.23] [18.08].632 [16.0].00 [12.70].206 [.23] [20.62].732 [18.9].600 [1.24].306 [7.77] [23.16].832 [21.13].700 [17.78].306 [7.77] [ [23.67].800 [20.32].406 [10.31] [28.24] [26.21].900 [22.86].106 [2.69].806 [20.47] [30.78] [28.7] [2.40].106 [2.69].906 [23.01] [33.32] [31.29] 1 [27.94].106 [2.69] [2.] [3.86] [33.83] [30.48].106 [2.69] [28.09] [38.40] [36.37] [33.02].106 [2.69] [30.63] [40.94] 1.32 [38.91] [3.6].106 [2.69] [33.17] Standard Profile Headers, Shrouded 117

34 PageHead_12_Helvdd Standard Profile Headers Shrouded, (ontinued) with.066 [1.68] End Dimension, Double-Row, x [2.4 x 2.4] enterline (ontinued) Standard Profile Headers, Shrouded No. of Dimensions Post Plating/Part Nos. Positions D E Plating Plating Plating [43.48] [41.4] 1.00 [38.10].106 [2.69] [3.71] [46.02] [43.99] [40.64].106 [2.69] 1.06 [38.2] [48.6] [46.3] [43.18].106 [2.69] [40.79] [1.10] [49.07] [4.72].106 [2.69] [43.33] [3.64] [1.61] [48.26].106 [2.69] [4.87] [6.18] [4.1] [0.80].106 [2.69] [48.41] [8.72] [6.69] 2 [3.34].106 [2.69] [0.9] [61.26] [9.23] [.88].106 [2.69] [3.49] [63.80] [61.77] [8.42].106 [2.69] [6.03] [66.34] 2.32 [64.31] [60.96].106 [2.69] [8.7] [68.88] [66.8] 2.00 [63.0].106 [2.69] [61.11] [71.42] [69.39] [66.04].106 [2.69] 2.06 [63.6] [73.96] [71.93] [68.8].106 [2.69] [66.19] [76.0] [74.47] [71.12].106 [2.69] [68.73] [79.04] [77.01] [73.66].106 [2.69] [71.27] [81.8] [79.] [76.20].106 [2.69] [73.81] [84.12] [82.09] 3 [78.74].106 [2.69] [76.3] [86.66] [84.63] [81.28].106 [2.69] [78.89] [89.20] [87.17] [83.82].106 [2.69] [81.43] [91.74] 3.32 [89.71] [86.36].106 [2.69] [83.97] [94.28] [92.2] 3.00 [88.90].106 [2.69] [86.1] [96.82] [94.79] [91.44].106 [2.69] 3.06 [89.0]

35 Standard Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post (with Detent Windows).10 [3.81] (2 Plc.).040 [1.02] (3 Plc.).200 [.08] Ref. (ontact rea).318 [8.08].12 [3.18].400 [10.16].280 [7.11] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post.440 [11.18] * D E.03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..090 [2.29] (2 Plc.).240 [6.10] *.080 [2.03].090 [2.29] Standard Profile Headers, Shrouded Related Product Data Mateable onnectors MPMODU MTE Receptacles pages 232, 233, 23 (used with coupling shroud on page 241) MPMODU Wire-pplied Receptacles pages ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications. No. of Dimensions Post Plating/Part Nos. Pos. D E Plating Plating Plating 6.80 [14.73].00 [12.70].200 [.08].190 [4.83] [17.27].600 [1.24].300 [7.62].190 [4.83] [19.81].700 [17.78].400 [10.16].290 [7.37] [22.3].800 [20.32].00 [12.70].290 [7.37] [24.89].900 [22.86].600 [1.24].390 [9.91] [27.43] [2.40].700 [17.78].390 [9.91] [29.97] 1 [27.94].800 [20.32].490 [12.4] [32.1] [30.48].900 [22.86].190 [4.83].890 [22.61] [3.0] [33.02] [2.40].190 [4.83].990 [2.1] [37.9] [3.6] 1 [27.94].190 [4.83] [27.69] [40.13] 1.00 [38.10] [30.48].190 [4.83] [30.23] [42.67] [40.64] [33.02].190 [4.83] [32.77] [4.21] [43.18] [3.6].190 [4.83] [3.31]

36 Standard Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline (ontinued) Standard Profile Headers, Shrouded No. of Dimensions Post Plating/Part Nos. Pos. D E Plating Plating Plating [47.7] [4.72] 1.00 [38.10].190 [4.83] [37.8] [0.29] [48.26] [40.64].190 [4.83] 1.90 [40.39] [2.83] [0.80] [43.18].190 [4.83] [42.93] [.37] 2 [3.34] [4.72].190 [4.83] [4.47] [7.91] [.88] [48.26].190 [4.83] [48.01] [60.4] [8.42] [0.80].190 [4.83] [0.] [62.99] [60.96] 2 [3.34].190 [4.83] [3.09] [6.3] 2.00 [63.0] [.88].190 [4.83] [.63] [68.07] [66.04] [8.42].190 [4.83] [8.17] [70.61] [68.8] [60.96].190 [4.83] [60.71] [73.1] [71.12] 2.00 [63.0].190 [4.83] [63.2] [7.69] [73.66] [66.04].190 [4.83] 2.90 [6.79] [78.23] [76.20] [68.8].190 [4.83] [68.33] [80.77] 3 [78.74] [71.12].190 [4.83] [70.87] [83.31] [81.28] [73.66].190 [4.83] [73.41] [8.8] [83.82] [76.20].190 [4.83] [7.9] [88.39] [86.36] 3 [78.74].190 [4.83] [78.49] [90.93] 3.00 [88.90] [81.28].190 [4.83] [81.03] [93.47] [91.44] [83.82].190 [4.83] [83.7] [96.01] [93.98] [86.36].190 [4.83] [86.11] [98.] [96.2] 3.00 [88.90].190 [4.83] [88.6]

37 Standard Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline (ontinued).02 [0.64] Square Straight Post (with Plastic Holddowns).10 [3.81] (2 Plc.).400 [10.16].040 [1.02] (3 Plc.).200 [.08] Ref. (ontact rea).280 [7.11].318 [8.08].12 [3.18] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Related Product Data Mateable onnectors MPMODU MTE Receptacles pages 232, 233, 23 (used with coupling shroud on page 241) MPMODU Wire-pplied Receptacles pages ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications..01 [.020] 0.38 [0.1] [ ].440 [11.18].00 (2 Plc.) [1.27].140 [3.6] (2 Plc.) [ ] Dia..090 [2.29] (2 Plc.) *.090 [2.29].040±.003 Dia. [1.02±0.08] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Part Nos. Pos. Plating 6.80 [14.73].00 [12.70].200 [.08] [19.81].700 [17.78].400 [10.16] [22.3].800 [20.32].00 [12.70] [24.89].900 [22.86].600 [1.24] [27.43] [2.40].700 [17.78] [29.97] 1 [27.94].800 [20.32] [32.1] [30.48].900 [22.86] [3.0] [33.02] [2.40] [37.9] [3.6] 1 [27.94] [40.13] 1.00 [38.10] [30.48] [4.21] [43.18] [3.6] [47.7] [4.72] 1.00 [38.10] [0.29] [48.26] [40.64] [2.83] [0.80] [43.18] [7.91] [.88] [48.26] [60.4] [8.42] [0.80] [68.07] [66.04] [8.42] [70.61] [68.8] [60.96] [4.7] * Standard Profile Headers, Shrouded 121

38 Standard Profile Headers Shrouded, with.066 [1.68] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Right-ngle Post (with Detent Windows).066 [1.68] (2 Plc.).400 [10.16].040 [1.02] (3 Plc.).200 [.08] Ref. (ontact rea).280 [7.11].318 [8.08].13 [3.43] Standard Profile Headers, Shrouded Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post Related Product Data Mateable onnectors MPMODU oard Mount Receptacles pages 176, 179, 180 MPMODU Wire-pplied Receptacles pages MPMODU MTE Receptacles pages 228, 229, 234 MPMODU MT Receptacles pages 26, 27 Technical Documents page 276 See mating connector for applicable product and application specifications..013 [0.33] (Standoffs).639 [16.23].489 [12.42] D E *.090 [2.29] (2 Plc.).17 [3.99].03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board).240 [6.10] *±.003 [±0.08] tolerances not to accumulate within one connector pattern..080 [2.03] * No. of Dimensions Post Plating/Part Nos. Pos. D E Plating Plating Plating [10.46].332 [8.43].200 [.08].106 [2.69] [13.00].432 [10.97].300 [7.62].106 [2.69] [1.4].32 [13.1].400 [10.16].206 [.23] [18.08].632 [16.0].00 [12.70].206 [.23] [20.62].732 [18.9].600 [1.24].306 [7.77] [23.16].832 [21.13].700 [17.78].306 [7.77] [2.70].932 [23.67].800 [20.32].406 [10.31] [28.24] [26.21].900 [22.86].106 [2.69].806 [20.47] [30.78] [28.7] [2.40].106 [2.69].906 [23.01] [33.32] [31.29] 1 [27.94].106 [2.69] [2.] [3.86] [33.83] [30.48].106 [2.69] [28.09] [38.40] [36.37] [33.02].106 [2.69] [30.63] [40.94] 1.32 [38.91] [3.6].106 [2.69] [33.17]

39 Standard Profile Headers Shrouded, with.066 [1.68] End Dimension, Double-Row, x [2.4 x 2.4] enterline (ontinued) No. of Dimensions Post Plating/Part Nos. Pos. D E Plating Plating Plating [43.48] [41.4] 1.00 [38.10].106 [2.69] [3.71] [46.02] [43.99] [40.64].106 [2.69] 1.06 [38.2] [48.6] [46.3] [43.18].106 [2.69] [40.79] [1.10] [49.07] [4.72].106 [2.69] [43.33] [3.64] [1.61] [48.26].106 [2.69] [4.87] [6.18] [4.1] [0.80].106 [2.69] [48.41] [8.72] [6.69] 2 [3.34].106 [2.69] [0.9] [61.26] [9.23] [.88].106 [2.69] [3.49] [63.80] [61.77] [8.42].106 [2.69] [6.03] [66.34] 2.32 [64.31] [60.96].106 [2.69] [8.7] [68.88] [66.8] 2.00 [63.0].106 [2.69] [61.11] [71.42] [69.39] [66.04].106 [2.69] 2.06 [63.6] [73.96] [71.93] [68.8].106 [2.69] [66.19] [76.0] [74.47] [71.12].106 [2.69] [68.73] [79.04] [77.01] [73.66].106 [2.69] [71.27] [81.8] [79.] [76.20].106 [2.69] [73.81] [84.12] [82.09] 3 [78.74].106 [2.69] [76.3] [86.66] [84.63] [81.28].106 [2.69] [78.89] [89.20] [87.17] [83.82].106 [2.69] [81.43] [91.74] 3.32 [89.71] [86.36].106 [2.69] [83.97] [94.28] [92.2] 3.00 [88.90].106 [2.69] [86.1] [96.82] [94.79] [91.44].106 [2.69] 3.06 [89.0] Standard Profile Headers, Shrouded 123

40 Standard Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Right-ngle Post (with Detent Windows).10 [3.81] (2 Plc.).040 [1.02] (3 Plc.).200 [.08] Ref. (ontact rea).318 [8.08].289 [7.34].400 [10.16].280 [7.11].13 [3.43] Standard Profile Headers, Shrouded Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post Related Product Data Mateable onnectors MPMODU MTE Receptacles pages 232, 233, 23 (used with coupling shroud on page 241) MPMODU Wire-pplied Receptacles pages [0.33] (Standoffs).639 [16.23].489 [12.42] D E *.240 [6.10].090 [2.29] (2 Plc.).080 [2.03].17 [3.99].03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) * *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Technical Documents page 276 See mating connector for applicable product and application specifications. No. of Dimensions Post Plating/Part Nos. Pos. D E Plating Plating Plating [17.27].600 [1.24].300 [7.62].190 [4.83] [19.81].700 [17.78].400 [10.16].290 [7.37] [22.3].800 [20.32].00 [12.70].290 [7.37] [24.89].900 [22.86].600 [1.24].390 [9.91] [27.43] [2.40].700 [17.78].390 [9.91] [29.97] 1 [27.94].800 [20.32].490 [12.4] [32.1] [30.48].900 [22.86].190 [4.83].890 [22.61] [3.0] [33.02] [2.40].190 [4.83].990 [2.1] [37.9] [3.6] 1 [27.94].190 [4.83] [27.69] [40.13] 1.00 [38.10] [30.48].190 [4.83] [30.23] [42.67] [40.64] [33.02].190 [4.83] [32.77] [4.21] [43.18] [3.6].190 [4.83] [3.31]

41 Standard Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline (ontinued) No. of Dimensions Post Plating/Part Nos. Pos. D E Plating Plating Plating [47.7] [4.72] 1.00 [38.10].190 [4.83] [37.8] [0.29] [48.26] [40.64].190 [4.83] 1.90 [40.39] [2.83] [0.80] [43.18].190 [4.83] [42.93] [.37] 2 [3.34] [4.72].190 [4.83] [4.47] [7.91] [.88] [48.26].190 [4.83] [48.01] [60.4] [8.42] [0.80].190 [4.83] [0.] [62.99] [60.96] 2 [3.34].190 [4.83] [3.09] [6.3] 2.00 [63.0] [.88].190 [4.83] [.63] [68.07] [66.04] [8.42].190 [4.83] [8.17] [70.61] [68.8] [60.96].190 [4.83] [60.71] [73.1] [71.12] 2.00 [63.0].190 [4.83] [63.2] [7.69] [73.66] [66.04].190 [4.83] 2.90 [6.79] [78.23] [76.20] [68.8].190 [4.83] [68.33] [80.77] 3 [78.74] [71.12].190 [4.83] [70.87] [83.31] [81.28] [73.66].190 [4.83] [73.41] [8.8] [83.82] [76.20].190 [4.83] [7.9] [88.39] [86.36] 3 [78.74].190 [4.83] [78.49] [90.93] 3.00 [88.90] [81.28].190 [4.83] [81.03] [93.47] [91.44] [83.82].190 [4.83] [83.7] [96.01] [93.98] [86.36].190 [4.83] [86.11] [98.] [96.2] 3.00 [88.90].190 [4.83] [88.6] Standard Profile Headers, Shrouded 12

42 Standard Profile Headers Shrouded, with.066 [1.68] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Right-ngle Post (with Pin Protection on 3 Sides).639 [16.23].489 [12.42] Standard Profile Headers, Shrouded Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post Related Product Data Mateable onnectors MPMODU oard Mount Receptacles pages 176, 179, 180 MPMODU Wire-pplied Receptacles pages 216, 217 MPMODU MTE Receptacles pages 228, 229, 234 MPMODU MT Receptacles pages 26, 27 Technical Documents page 276 See mating connector for applicable product and application specifications..040 [1.02] (2 Plc.).066 [1.68] (2 Plc.) * *.03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern..090 [2.29] (2 Plc.) [9.17] [7.11].200 [.08] Ref. (ontact rea).318 [8.08].17 [3.99].289 [7.34] No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating Plating [10.46].332 [8.43].200 [.08] [13.00].432 [10.97].300 [7.62] [1.4].32 [13.1].400 [10.16] [18.08].632 [16.0].00 [12.70] [20.62].732 [18.9].600 [1.24] [23.16].832 [21.13].700 [17.78] [2.70].932 [23.67].800 [20.32] [28.24] [26.21].900 [22.86] [33.32] [31.29] 1 [27.94] [3.86] [33.83] [30.48] [40.94] 1.32 [38.91] [3.6] [46.02] [43.99] [40.64] [3.64] [1.61] [48.26] [66.34] 2.32 [64.31] [60.96] [68.88] [66.8] 2.00 [63.0] [71.42] [69.36] [66.04] [79.04] [77.01] [73.66] [3.18] 126

43 Standard Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Right-ngle Post (with Pin Protection on 3 Sides).639 [16.23].489 [12.42] Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post.040 [1.02] (2 Plc.).10 [3.81] (2 Plc.).361 [9.17].200 [.08] Ref. (ontact rea).361 [9.17].090 [2.29] (2 Plc.).280 [7.11].318 [8.08].17 [3.99].289 [7.34].12 [3.18] Standard Profile Headers, Shrouded Related Product Data Mateable onnectors MPMODU Wire-pplied Receptacles pages 216, 217 Technical Documents page 276 See mating connector for applicable product and application specifications. * *.03±.003 Dia. [0.89±0.08] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating Plating [19.81].700 [17.78].400 [10.16] [22.3].800 [20.32].00 [12.70] [24.89].900 [22.86].600 [1.24] [27.43] [2.40].700 [17.78] [29.97] 1 [27.94].800 [20.32] [32.1] [30.48].900 [22.86] [37.9] [3.6] 1 [27.94] [40.13] 1.00 [38.10] [30.48] [4.21] [43.18] [3.6] [0.29] [48.26] [40.64] [7.91] [.88] [48.26] [70.61] [68.8] [60.96] [83.31] [81.28] [73.66]

44 Standard Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Right-ngle Post (with Plastic Holddowns) [16.23] [12.42] Standard Profile Headers, Shrouded Housing lack thermoplastic, 94V-0 rated Posts Phosphor bronze, duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Related Product Data Mateable onnectors MPMODU MTE Receptacles pages 232, 233, 23 (used with coupling shroud on page 241) MPMODU Wire-pplied Receptacles pages [3.81] (2 Plc.).01 [.020] 0.38 [0.1] [ ].400 [10.16] (Standoffs).140 [3.6] (2 Plc.).00 [1.27] (2 Plc.).040±.003 Dia. [1.02±0.08].090 [2.29] (2 Plc.).41 [11.46].040 [1.02] (2 Plc.) *.200 [.08] Ref. (ontact rea).318 [8.08].280 [7.11].180 [4.7].41 [11.46].289 [7.34].13 [3.43] Technical Documents page 276 See mating connector for applicable product and application specifications Dia (2 Plc.) [ ] Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Pos. Part Nos [19.81].700 [17.78].400 [10.16] [22.3].800 [20.32].00 [12.70] [24.89].900 [22.86].600 [1.24] [27.43] [2.40].700 [17.78] [32.1] [30.48].900 [20.86] [4.21] [43.18] [3.6] [0.29] [48.26] [40.64] [7.91] [.88] [48.26] [68.07] [66.04] [8.42]

45 Standard Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline (ontinued).02 [0.64] Square Straight Post (with Detent Windows and Mounting Ears).220 [.9].32 [8.94].10 [3.81].062 R [1.7].200 [.08] Ref. (ontact rea).090 [2.29].400 [10.16].280 [7.11] Housing lack thermoplastic, 94V-0 rated Posts opper alloy, plated [ ] gold over [ ] nickel on entire post Related Product Data Mateable onnectors MPMODU Wire-pplied Receptacles pages MPMODU MTE Receptacles pages 232, 233, 23 (used with coupling shroud on page 241) ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications..440 [11.18].090 [2.29].00 [1.27] F.32 [8.94].03±.003 Dia. [0.89±0.08].090 [2.29].047 (2 Plc.) [1.19] D E G D * *.240 [6.10].080 [2.03].12 Dia. [3.18].318 [8.08].12 [3.18] Standard Profile Headers, Shrouded Recommended P oard Hole Layout (for.0 [1.40] min. thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Pos. D E F G Part Nos [19.81].700 [17.78].400 [10.16] [28.04] [33.12].290 [7.37] [24.89].900 [22.86].600 [1.24] [33.12] 1.04 [38.20].190 [4.83] [32.1] [30.48].900 [22.86] [40.74] [4.82].190 [4.83].890 [22.61] [37.9] [3.6] 1 [27.94] [4.82] [0.90].190 [4.83] [27.69] [40.13] 1.00 [38.10] [30.48] [48.36] [3.44].190 [4.83] [30.23] [0.29] [48.26] [40.64] [8.2] 2.04 [63.60].190 [4.83] 1.90 [40.39] [7.91] [.88] [48.26] [66.14] [71.22].190 [4.83] [48.01] [70.61] [68.8] [60.96] [78.84] [83.92].190 [4.83] [60.71] [83.31] [81.28] [73.66] [91.4] [96.62].190 [4.83] [73.41]

46 Standard Profile Headers Shrouded ulkhead Type; with.066 [1.68] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post (with Detent Windows and Mounting Ears) E D [.9] [8.94] [1.19] [2.03] [8.08].090 [2.29].330 [8.38].400 [10.16].280 [7.11] Standard Profile Headers, Shrouded Housing lack thermoplastic, 94V-0 rated Posts opper alloy, plated [ ] gold over [ ] nickel on entire post Related Product Data Mateable onnectors MPMODU oard Mount Receptacles pages 176, 179, 180 MPMODU Wire-pplied Receptacles pages MPMODU MTE Receptacles pages 228, 229, 234 MPMODU MT Receptacles pages 26, 27 ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications..880 [22.3].040 [1.02].440±.002 [11.18±0.0] F.23±.002 [.97±0.0].00 [0.13] R Max. (4 orners).066** [1.68] G.240 [6.10] F G Recommended Panel utout **oth mating faces have same end dimension. H ±.002 [±0.0] D ±.002 [±0.0].062 [1.7] R.080 [2.03] Dia. [ ].30 [13.46].090 [2.29].288 [7.32].062 [1.7] Thick Panel.200 [.08] Ref. (ontact rea) No. of Dimensions Pos. D E F G H Part Nos [1.4].32 [13.1].400 [10.16] [28.04] [33.12].206 [.23].632 [16.0] [18.08].632 [16.0].00 [12.70] [30.8] [3.66].206 [.23].732 [18.9] [28.24] [26.21].900 [22.86] [40.74] [4.82].106 [2.69].806 [20.47] [28.7] [33.32] [31.29] 1 [27.94] [4.82] [0.90].106 [2.69] [2.] [33.83] [3.86] [33.83] [30.48] [48.36] [3.44].106 [2.69] [28.09] [36.37] [46.02] [43.99] [40.64] [8.2] 2.04 [63.60].106 [2.69] 1.06 [38.2] [46.3] [3.64] [1.61] [48.26] [66.14] [71.22].106 [2.69] [4.87] [4.1] [66.34] 2.32 [64.31] [60.96] [78.84] [83.92].106 [2.69] [8.7] [66.8] [79.04] [77.01] [73.66] [91.4] [96.62].106 [2.69] [71.27] [79.]

47 Standard Profile Headers Shrouded ulkhead Type; with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post (with Detent Windows and Mounting Ears) D [.9] [8.94] [1.19] [2.03] [8.08].090 [2.29].330 [8.38].400 [10.16].280 [7.11] Housing lack thermoplastic, 94V-0 rated Posts opper alloy, plated [ ] gold over [ ] nickel on entire post.880 [22.3].040 [1.02] F.10** [3.81] G.062 [1.7] R.30 [13.46].090 [2.29].062 [1.7] Thick Panel.200 [.08] Ref. (ontact rea) Related Product Data Mateable onnectors MPMODU MTE Receptacles pages 232, 233, 23 (used with coupling shroud on page 241) MPMODU Wire-pplied Receptacles pages ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications..440±.002 [11.18±0.0].23±.002 [.97±0.0].00 [0.13] R Max. (4 orners).240 [6.10] F G H ±.002 [±0.0] Recommended Panel utout D ±.002 [±0.0].080 [2.03] Dia. [ ].288 [7.32] Standard Profile Headers, Shrouded **oth mating faces have same end dimension. No. of Dimensions Pos. D E F G H Part Nos [19.81].700 [17.78].400 [10.16] [28.04] [33.12].290 [7.37].800 [20.32] [32.1] [30.48].900 [22.86] [40.74] [4.82].190 [4.83].890 [22.61] [33.02] [37.9] [3.6] 1 [27.94] [4.82] [0.90].190 [4.83] [27.69] 1.00 [38.10] [40.13] 1.00 [38.10] [30.48] [48.36] [3.44].190 [4.83] [30.23] [40.64] [4.21] [43.18] [3.6] [3.44] [8.2].190 [4.83] [3.31] [4.72] [47.7] [4.72] 1.00 [38.10] [.98] [61.06].190 [4.83] [37.8] [48.26] [0.29] [48.26] [40.64] [8.2] 2.04 [63.60].190 [4.83] 1.90 [40.39] [0.80] [7.91] [.88] [48.26] [66.14] [71.22].190 [4.83] [48.01] [8.42] [70.61] [68.8] [60.96] [78.84] [83.92].190 [4.83] [60.71] [71.12] [83.31] [81.28] [73.66] [91.4] [96.62].190 [4.83] [73.41] [83.82]

48 Standard Profile Headers Shrouded ulkhead Type; with.066/.10 [1.68/3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post (with Detent Windows and Mounting Ears).220 [.9].32 [8.94] E D.080 [2.03].047 [1.19].200 [.08] Ref. (ontact rea).880 [22.3].400 [10.16].280 [7.11] Housing lack thermoplastic, 94V-0 rated Posts opper alloy, plated [ ] gold over [ ] nickel on entire post.289 [7.34].040 [1.02].080 [2.03].10 [3.81] G F.062 [1.7] R.090 [2.29].318 [8.08].090 [2.29].330 [8.38] Standard Profile Headers, Shrouded Related Product Data Mateable onnectors with.066 [1.68] End Dimension MPMODU oard Mount Receptacles pages 176, 179, 180 MPMODU Wire-pplied Receptacles pages MPMODU MTE Receptacles pages 228, 229, 234 MPMODU MT Receptacles pages 26, 27 Mateable onnectors with.10 [3.81] End Dimension MPMODU MTE Receptacles pages 232, 233, 23 (used with coupling shroud on page 241).062 R [1.7].240 [6.10] K L J.066 [1.68] H.040 [1.02].062 [1.7] Thick Panel.400 [10.16] ccessories arrier Insert page [1.19].080 [2.03] D.32 [8.94].220 [.9] Technical Documents page 276 See mating connector for applicable product and application specifications..23±.002 [.97±0.0] E D [±0.0] ±.002 M [±0.0] ± ±.002 [11.18±0.0].00 [0.13] R Max. (4 orners) Dia. [ ] Recommended Panel utout 132

49 Standard Profile Headers Shrouded ulkhead Type; with.066/.10 [1.68/3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline (ontinued) No. of Dimensions Pos. D E F Part Nos [19.81].700 [17.78].400 [10.16] [28.04] [33.12].290 [7.37] [32.1] [30.48].900 [22.86] [40.74] [4.82].190 [4.83] [37.9] [3.6] 1 [27.94] [4.82] [0.90].190 [4.83] [40.13] 1.00 [38.10] [30.48] [48.36] [3.44].190 [4.83] [4.21] [43.18] [3.6] [3.44] [8.2].190 [4.83] [0.29] [48.26] [40.64] [8.2] 2.04 [63.60].190 [4.83] [7.91] [.88] [48.26] [66.14] [71.22].190 [4.83] [70.61] [68.8] [60.96] [83.92] [83.92].190 [4.83] [83.31] [81.38] [73.66] [91.4] [96.62].190 [4.83] No. of Dimensions Pos. G H J K L M Part Nos [.23].612 [1.4].32 [13.1].632 [16.0] [22.61].106 [2.69].806 [20.47] [28.24] [26.21] [28.7] [27.69].106 [2.69] [2.] [33.32] [31.29] [33.83] [30.23].106 [2.69] [28.09] [3.86] [33.83] [36.37] [3.31].106 [2.69] [33.17] [40.94] 1.32 [38.91] [41.4] [40.39].106 [2.69] 1.06 [38.2] [46.02] [43.99] [46.3] [48.01].106 [2.69] [4.87] [3.64] [1.61] [4.1] [60.71].106 [2.69] [8.7] [66.34] 2.32 [64.31] [66.8] [73.41].106 [2.69] [71.27] [79.04] [77.01] [79.] Standard Profile Headers, Shrouded 133

50 MP-LTH Low Profile Headers Shrouded Low Profile Headers, Shrouded Product Facts vailable in selected positions 10 thru 60 Flame retardant, thermoplastic housings, 94V-0 rated Vertical and right-angle versions available in double row configurations vailable in.02 [0.64] square drawn wire posts Wash out clearance for flux removal Mates with MP-LTH Ribbon able onnectors vailable with and without eject latches vailable with and without kinked soldertails for P retention Recognized under the omponent Program of Underwriters Laboratories Inc. R File No. E28476 ertified by anadian Standards R ssociation, File No. LR 7189 Performance haracteristics Electrical Insulation Resistance,000 megohms minimum initial Dielectric Withstanding Voltage 1,000 V rms at sea level Environmental Operating Temperature -6 to +10 urrent 1 ampere maximum per contact 134

51 MP-LTH Low Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post.04 [1.14] (2 Plc.).16 [4.19].07 ±.002 (2 Plc.) [1.91±0.0].360 [9.14] Housing Glass-filled nylon, black, 94V-0 rated Posts opper alloy, plated as follows: Plating Gold flash over [ ] min. palladium-nickel plate on the mating surfaces, [0.0024] min. tin plate on soldertails, with entire post underplated [ ] min. nickel Plating Gold flash over [ ] min. palladium-nickel plate on the mating surfaces, [0.0024] min. tin plate on soldertails, with entire post underplated [ ] min. nickel Related Product Data Electrical haracteristics page 134 Mateable onnectors MPMODU Wire-pplied Receptacles page 220 MPMODU oard Mount Receptacles pages 179, 180 Short Point Wire-pplied onnectors page [3.30] [ 1.02 ] ±.010 [4.70 ±0.2 ] ±.003* [2.4±0.08].18 [4.70].02±.001 [0.64±0.03] ±.003* [2.4±0.08].040±.003 [1.02±0.08] Dia [ 0.38 ] [ 0.1 ] [9.78].240 [6.10].200 [.08] (ontact rea).120±.01 [3.0±0.38] Low Profile Headers, Shrouded Recommended P oard Hole Layout For Manual Insertion *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [20.32].400 [10.16] [2.40].600 [1.24] [27.94].700 [17.78] [33.02].900 [22.86] [3.6] 1 [27.94] [40.64] [30.48] [0.80] [40.64] [8.42] [48.26] [71.12] [60.96] [83.82] [73.66]

52 MP-LTH Low Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline (ontinued).02 [0.64] Square Right-ngle Post Position No.1 Indicator.38 [9.77].16 [4.19].02±.001 [0.64±0.03] Low Profile Headers, Shrouded Housing Glass-filled nylon, black, 94V-0 rated Posts opper alloy, plated as follows: Plating Gold flash over [ ] min. palladium-nickel plate on the mating surfaces, [0.0024] min. tin plate on soldertails, with entire post underplated [ ] min. nickel Plating Gold flash over [ ] min. palladium-nickel plate on the mating surfaces, [0.0024] min. tin plate on soldertails, with entire post underplated [ ] min. nickel Related Product Data Electrical haracteristics page 134 Mateable onnectors MPMODU Wire-pplied Receptacles page 220 Short Point Wire-pplied onnectors page [.016] [ ] Plc..130 [3.30].18±.010 [4.69±0.2].18 [4.69] ±.003* [2.4±0.08].010 [0.2] ±.003* [2.4±0.08].03±.003 [0.89±0.08] Dia..04 (2 Plc.) [1.14].130 [3.30].360 [9.14].07±.002 [1.90±0.0].02±.001 [.63±0.03].123 [3.12].240 [6.09].200 (contact area) [.08] [ ] Recommended P oard Hole Layout For Manual Insertion *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Post Plating/Part Nos. Pos. Plating Plating [20.32].400 [10.16] [2.40].600 [1.24] [27.94].700 [17.78] [33.02].900 [22.86] [40.64] [30.48] [0.80] [40.64] [8.42] [48.26] [71.12] [60.96] [83.82] [73.66]

53 MP-LTH Low Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline & Kinked Soldertails for P Retention.02 [0.64] Square Straight Post (with oard Retention Feature) [ ] (2 Plc.).04 [1.14].16 [4.19].07±.002 [1.91±0.0] (2 Plc.).36 [9.27] Housing Glass-filled PP, black, 94V-0 rated Posts opper alloy, plated with gold flash over [ ] min. palladium-nickel plate on the mating surfaces, [0.0024] min. tin plate on soldertails, with entire post underplated [ ] min. nickel Related Product Data Electrical haracteristics page 134 Mateable onnectors MPMODU Wire-pplied Receptacles page 220 MPMODU oard Mount Receptacles pages 179, 180 Short Point Wire-pplied onnectors page 224 *Reflow solder process compatible.140 [3.6] [ 1.02 ] ±.010 [4.69±0.2] ±.003* [2.4±0.08].18 [4.69].02±.001 [0.64±0.03] ±.003* [2.4±0.08].040±.003 [1.02±0.08] Dia [ 0.64 ] [ 0.1 ] [9.78].240 [6.10].200 [.08] (ontact rea).120±.01 [3.0±0.38] Low Profile Headers, Shrouded Recommended P oard Hole Layout For Manual Insertion *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Post Plating Pos. Part Nos [20.32].400 [10.16] [2.40].600 [1.24] [27.94].700 [17.78] [33.02].900 [22.86] [3.6] 1 [27.94] [0.80] [40.64] [8.42] [48.26] [71.12] [60.96] [83.82] [73.66]

54 MP-LTH Low Profile Headers Shrouded, with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline & Kinked Soldertails for P Retention (ontinued).02 [0.64] Square Right-ngle Post (with oard Retention Feature) Position No.1 Indicator.38 [9.77].16 [4.19].02±.001 [0.64±0.03] Low Profile Headers, Shrouded Housing Glass-filled PP, black, 94V-0 rated Posts opper alloy, plated with gold flash over [ ] min. palladium-nickel plate on the mating surfaces, [0.0024] min. tin plate on soldertails, with entire post underplated [ ] min. nickel Related Product Data Electrical haracteristics page 134 Mateable onnectors MPMODU Wire-pplied Receptacles page 220 Short Point Wire-pplied onnectors page Plc. [ ].370 [9.40].140 [3.6].18±.010 [4.69±0.2].200 [.08].18 [4.69] ±.003* [2.4±0.08].04 (2 Plc.) [1.14].130 [3.30].07±.002 [1.90±0.0] 2 Plc. ±.003* [2.4±0.08].040±.003 [1.02±0.08] Dia [ 0.64 ] [6.09] (contact area).200 [.08].02±.001 [.63±0.03].123 [3.12] [ ] Recommended P oard Hole Layout For Manual Insertion *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Post Plating Pos. Part Nos [20.32].400 [10.16] [2.40].600 [1.24] [27.94].700 [17.78] [33.02].900 [22.86] [8.42] [48.26] [71.12] [60.96]

55 Universal Ejection Style Pin Headers, Military, enter and Dual Polarized, x [2.4 x 2.4] enters Straight-Thru, 4-Sided.02 [0.64] Sq. Posts.336 [8.3].23 [6.43].31 [8.00].10 [3.81].16 [4.19].190 [4.83].240 [6.10].02 [0.64] Pin Header with Latches.49 [13.94] Position No.1 Indicator.10 [3.81].00 [1.27].02 [0.64].02 [0.64].096 [2.44] Dia. 2 Plc..106 [2.74].107 [2.72].289 [7.34] E Solder Tail Pin Header without Latches Housing & Latches lack thermoplastic, 94V-0 rated ontacts rass or phosphor bronze (at Tyco Electronics option); Duplex [ ] gold on mating end, [0.0024] min. tin on termination end, with entire contact underplated [ ] nickel Related Product Data Electrical haracteristics page 134 Mateable onnectors MPMODU Wire-pplied Receptacles page 220 Mounting Information 4-24 self-tapping screws and 2-6 bolts and nuts are available for mounting straight-thru pin headers of pc boards. Typical applications and part nos. for ordering this hardware are presented below. Note: 2-6 bolts and nuts may be used to mount pin headers with and without latches. If latches are to be used, the bolts must be positioned in the pin header before the latches are installed. Note: ll part numbers are RoHS compliant. No. of Dimensions Part Number Positions D E (Without Latches) [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization), located as shown. Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown. D 4-24 Self-Tapping Screw (2 Req d.) Pin Header Mounting using 4-24 Self-Tapping Screws: Part No (for.062 [1.7] Thick P oard) Part No (for.093 [2.36] Thick P oard) Part No (for.12 [3.18] Thick P oard).19 [4.9] Note: Used with Header (optional) Latch (sold separately) Part Number Latch (See Note at left.) 2-6 olt & Nut (2 Each Req d.).26 [6.0] Pin Header Mounting with 2-6 olts and Nuts: Part No (olt Only) Kit No (olt and Nut, 2 Each per Kit) 139 Universal Ejection Style Pin Headers

56 Universal Ejection Style Pin Headers, Military, enter and Dual Polarized, x [2.4 x 2.4] enters (ontinued) Right-ngle, 4-Sided.02 [0.64] Sq. Posts.23 [6.43] [8.3] [8.00].10 [3.81].16 [4.19].190 [4.83].02 [0.64] Dia..240 [6.10].038 [0.97] E Solder Tail Pin Header with Latches Pos. No. 1 Indicator.10 [3.81].02 [0.64].00 [1.27].02 [0.64].096 [2.44].107 [2.72].289 [7.34].49 [13.94].108 [2.74] Universal Ejection Style Pin Headers 140 Pin Header without Latches Housing & Latches lack thermoplastic, 94V-0 rated ontacts rass or phosphor bronze (at Tyco Electronics option); Duplex [ ] gold on mating end, [0.0024] min. tin on termination end, with entire contact underplated [ ] nickel Related Product Data Electrical haracteristics page 134 Mateable onnectors MPMODU Wire-pplied Receptacles page 220 Mounting Information 4-24 self-tapping screws and 2-6 bolts and nuts are available for mounting straight-thru pin headers of pc boards. Typical applications and part nos. for ordering this hardware are presented below. Note: 2-6 bolts and nuts may be used to mount pin headers with and without latches. If latches are to be used, the bolts must be positioned in the pin header before the latches are installed. Note: ll part numbers are RoHS compliant. D.19 [4.9] No. of Dimensions Part Number Positions D E (Without Latches) [2.79] [3.94] [2.79] * [3.94] * [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] * [2.79] [3.94] [2.79] [3.94] [2.79] [3.94] Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization), located as shown. Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown. *lue housing. Latch (See Note at left.) 4-24 Self-Tapping Screw (2 Req d.) Pin Header Mounting using 4-24 Self-Tapping Screws: Part No (for.062 [1.7] Thick P oard) Part No (for.093 [2.36] Thick P oard) Part No (for.12 [3.18] Thick P oard) Note: Used with Header (optional) Latch (sold separately) Part Number olt & Nut (2 Each Req d.).26 [6.0] Pin Header Mounting with 2-6 olts and Nuts: Part No (olt Only) Kit No (olt and Nut, 2 Each per Kit)

57 MPMODU Stacking onnectors Shrouded,.02 x.02 [0.64 x 0.64] Posts Product Facts Parallel P board stacking without use of mother boards Provides space between boards for interference-free routing of wire-to-board connections Two header heights available:.78 [19.94] and [30.48] Vertical mount headers are fully shrouded Receptacle contacts have dual cantilever beams with built-in overstress protection.02 [0.64] sq. posts and receptacle contacts on double-row, x [2.4 x 2.4] centers Header posts and receptacle contacts are phosphor bronze, duplex plated Housings are made of flame retardant, glass-filled thermoplastic MPMODU stacking connectors are a two-piece interconnection system designed for parallel stacking printed circuit boards, without the use of mother boards. Vertical mount headers and receptacle assemblies feature duplex plated posts and receptacle contacts on a double-row, x [2.4 x 2.4] grid. The.02 [ 0.64] sq. header posts are more protected, and the top-entry receptacle contacts utilize the proven MPMODU receptacle contact design; dual cantilever beams with builtin overstress protection. Headers are available in two heights:.78 [19.94] and [30.48]. This allows the customer to use the height of the header to keep wire-to-board connections up and away from other board components, particularly if the components are densely packaged around the header. Shrouded Stacking Headers 141

58 Receptacle ssemblies, Double-Row oard Mounted Vertical Mount, Top Entry, High Profile, Selectively Loaded (with Standoffs).00 [1.27].238 [6.0] Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated [ ] min. gold on mating area, [ ] matte tin on solder area, with entire contact underplated [ ] nickel.320 [8.13].02 [0.64] Post Entry.17 [4.4].020 [0.1] (Standoffs).11 [2.92] Shrouded Stacking Headers *.03±.003 [0.89±0.08] Dia. * Recommended P oard Hole Layout * ±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Receptacle Pos. ssembly Part No. 48* [60.96] [8.42] (40 ctive) * [76.2] [73.66] (2 ctive) *In addition to the active positions, each receptacle has four cavities on each end that are not loaded with contacts. These empty cavities aid in aligning the receptacle with header posts during mating. Notes: 1. Part no. and date code stamped on housing where size permits. Notes: 2. These receptacle assemblies mate with headers of the same size as the active positions listed above. Refer to pages 143 and

59 Headers, Double-Row,.78 [19.94] Height.02 x.02 [0.64 x 0.64] Straight Post (with Pin Protection).320 [8.13].090 [2.29].124 [3.1].348 [8.84] Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated [ ] min. gold on mating area, [ ] matte tin on solder area, with entire post underplated [ ] nickel.20 [3.81].103 [2.62] Dia. (at Surface).070 [1.78].103 [2.62].02 [0.64] Sq. Posts.340 [8.64].380 [9.6] Min..78 [19.94].40 [11.43].099 [2.1] Dia. (at.340 [8.64] Depth).26 [6.73] D.084 [2.13].268 [6.81].27 [6.99].02 [0.64] Sq. Posts Shrouded Stacking Headers.20±.003 [3.81±0.08].00±.003 [1.27±0.08] *.043±.00 Dia. [1.09±0.13].12 [3.18] Dia. * Recommended P oard Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Header Pos. D Part No [69.09] [60.96] [48.26] [61.27] [84.33] [76.2] 2.00 [63.] [76.96] Note: These headers mate with receptacle assemblies having the same number of active positions. See page

60 Headers, Double-Row, [30.48] Height.02 x.02 [0.64 x 0.64] Straight Post (with Pin Protection).320 [8.13].090 [2.29].124 [3.1].348 [8.84] Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated [ ] min. gold on mating area, [ ] matte tin on solder area, with entire post underplated [ ] nickel.077 [1.96] Dia. (at Surface).340 [8.64].20 [6.3].20 [6.3].040 [1.02].30 [8.89] Min..098 [2.49].02 [0.64] Sq. Posts.86 [21.97] Shrouded Stacking Headers.073 [1.8] Dia. (at.340 [8.64] Depth) [30.48].060 [1.2].27 [6.99].26 [6.73] D.084 [2.13].268 [6.81].02 [0.64] Sq. Posts.20±.003 [3.81±0.08].00±.003 [1.27±0.08] *.043±.00 [1.09±0.13].12 [3.18] Dia. * Recommended P oard Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Header Pos. D Part No [84.33] [76.2] 2.00 [63.] [76.96] Note: This header mates with receptacle assembly having the same number of active positions. See page

61 TION PIN Headers Shrouded and Unshrouded Product Facts Straight posted unshrouded and shrouded versions.02 [0.64] square TION PIN posts TION PIN posts make a gas-tight, press-fit connection in plated-through holes Designed not to damage plated-through holes Unshrouded headers available in selected sizes 1 through 40 positions (single-row) and 4 through 80 positions (double-row) Shrouded headers (doublerow) available in selected sizes of 6 through 60 positions Flame retardant, black thermoplastic housings, 94V-0 rated enterline spacing Recognized under the omponent Program of Underwriters Laboratories Inc., R File No. E28476 ertified by anadian Standards R ssociation, File No. LR 164 TION PIN Headers 14

62 .02 [0.64] Square Straight Post TION PIN Headers Unshrouded, Single-Row, enterline.092 [2.34].200 [.08] Ref. (ontact rea).00 [1.27] Max..320 [8.13].090 [2.29].20 [6.3] Housing lack thermoplastic, 94V-0 rated Posts opper alloy, duplex plated [ ] gold on contact area, [ ] matte tin on termination end, with entire post underplated [ ] nickel.042 [1.07] * See page 168 for hole dimensions Recommended P oard Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. TION PIN Headers, Unshrouded Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 TION PIN Posts pages 10, 11 pplication Tooling page 12 Technical Documents page 276 See mating connector for applicable product and application specifications Part Nos. No. of Dimensions For.062 For Pos. [1.7] [ ] Thick P oards Thick P oards [2.13] [4.67] [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [30.07] 1 [27.94] [32.61] [30.48] [3.1] [33.02] [37.69] [3.6] [40.23] 1.00 [38.10] [42.77] [40.64] [4.31] [43.18] [47.8] [4.72] [0.39] [48.26] [2.93] [0.80] [.47] 2 [3.34] [8.01] [.88] [60.] [8.42] [63.09] [60.96] [6.63] 2.00 [63.0] [68.17] [66.04] [70.71] [68.8] [73.2] [71.12] [7.79] [73.66] [80.87] 3 [78.74] [91.03] 3.00 [88.90] [101.19] [99.06] Note: To insert header into P board, use seating tool with arbor tool or air powered machine page

63 TION PIN Headers Unshrouded, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post.00 [1.27] Max..200 [.08] Ref. (ontact rea).320 [8.13].090 [2.29].20 [6.3] Housing lack thermoplastic, 94V-0 rated Posts opper alloy, duplex plated [ ] gold on contact area, [ ] matte tin on termination end, with entire post underplated [ ] nickel.042 [1.07] (2 Plc.) * * See page 11 for hole dimensions.192 [4.88] Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 TION PIN Posts pages 10, 11 pplication Tooling page 12 ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications Recommended P oard Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Part Nos. No. of Dimensions For For.062 [1.7] Pos. Thick [ ] P oards Thick P oards [4.67] [7.21].200 [.08] [9.7].300 [7.62] [12.29].400 [10.16] [14.83].00 [12.70] [17.37].600 [1.24] [19.91].700 [17.78] [22.4].800 [20.32] [24.99].900 [22.86] [27.3] [2.40] [30.07] 1 [27.94] [32.61] [30.48] [3.1] [33.02] [37.69] [3.6] [40.23] 1.00 [38.10] [42.77] [40.64] [4.31] [43.18] [47.8] [4.72] [0.39] [48.26] [2.39] [0.80] [8.01] [.88] [63.09] [60.96] [7.79] [73.66] [83.41] [81.28] [101.19] [99.06] TION PIN Headers, Unshrouded 147

64 TION PIN Headers Shrouded with.066 [1.68] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post (with Detent Windows, for [ ] Thick P oard).066 [1.68] (2 Plc.).040 [1.02] (3 Plc.).200 [.08] Ref. (ontact rea).320 [8.13].20 [6.3].400 [10.16].090 [2.29] (2 Plc.).090 [2.29] D E.240 [6.10] (2 Plc.) TION PIN Headers, Shrouded Housing lack thermoplastic, 94V-0 rated Posts opper alloy, duplex plated [ ] gold on contact area, [ ] matte tin on termination end, with entire post underplated [ ] nickel Related Product Data Mateable onnectors MPMODU oard Mount Receptacles pages 176, 179, 180 MPMODU Wire-pplied Receptacles pages MPMODU MT Receptacles pages 26, 27 TION PIN Posts pages 10, 11 pplication Tooling page 12 ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications.08 [2.16] * See page 11 for hole dimensions * Recommended P oard Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern..440 [11.18] No. of Dimensions Header Pos. D E Part Nos [10.46].332 [8.43].200 [.08].106 [2.69] [13.00].432 [10.97].300 [7.62].106 [2.69] [1.4].32 [13.1].400 [10.16].206 [.23] [18.08].632 [16.0].00 [12.70].206 [.23] [20.62].732 [18.9].600 [1.24].306 [7.77] [23.16].832 [21.13].700 [17.78].306 [7.77] [2.70].932 [23.67].800 [20.32].406 [10.31] [28.24] [26.21].900 [22.86].106 [2.69].806 [20.47] [3.86] [33.83] [30.48].106 [2.69] [28.09] [40.94] 1.32 [38.91] [3.6].106 [2.69] [33.17] [46.02] [43.99] [40.64].106 [2.69] 1.06 [38.2] [3.64] [1.61] [48.26].106 [2.69] [4.87] [66.34] 2.32 [64.31] [60.96].106 [2.69] [8.7] [79.04] [77.01] [73.66].106 [2.69] [71.27]

65 TION PIN Headers Shrouded with.10 [3.81] End Dimension, Double-Row, x [2.4 x 2.4] enterline.02 [0.64] Square Straight Post (with Detent Windows, for [ ] Thick P oard).10 [3.81] (2 Plc.).040 [1.02] (3 Plc.).200 [.08] Ref. (ontact rea).320 [8.13].20 [6.3].400 [10.16].090 [2.29] (2 Plc.).090 [2.29] D E.240 [6.10] (2 Plc.) Housing lack thermoplastic, 94V-0 rated Posts opper alloy, duplex plated [ ] gold on contact area, [ ] matte tin on termination end, with entire post underplated [ ] nickel Related Product Data Mateable onnectors MPMODU MTE Receptacles pages 232, 233 TION PIN Posts pages 10, 11 pplication Tooling page 12 ccessories arrier Insert page 204 Technical Documents page 276 See mating connector for applicable product and application specifications.08 [2.16] * * See page 11 for hole dimensions Recommended P oard Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern..440 [11.18] No. of Dimensions Header Pos. D E Part Nos [14.73].00 [8.43].200 [.08].190 [4.83] [17.27].600 [10.97].300 [7.62].190 [4.83] [19.81].700 [17.78].400 [10.16].290 [7.37] [22.3].800 [20.32].00 [12.70].290 [7.37] [24.89].900 [22.86].600 [1.24].390 [9.91] [27.43] [2.40].700 [17.78].390 [9.91] [29.97] 1 [27.94].800 [20.32].490 [10.31] [32.1] [30.48].900 [22.86].190 [4.83].890 [22.61] [37.9] [3.6] 1 [27.94].190 [4.83] [27.69] [40.13] 1.00 [38.10] [30.48].190 [4.83] [30.23] [4.21] [43.18] [3.6].190 [4.83] [3.31] [0.29] [48.26] [40.64].190 [4.83] 1.90 [40.39] [7.91] [.88] [48.26].190 [4.83] [48.01] [70.61] [68.8] [60.96].190 [4.83] [60.71] [83.31] [81.28] [73.66].190 [4.83] [73.41] TION PIN Headers, Shrouded 149

66 TION PIN Press-Fit Posts TION PIN Press-Fit Posts The Reliable Plated-Through Hole Interconnect Solderless interconnections have been popular in electrical and electronic applications with world-wide success for decades. They provide reliable electrical and mechanical stability and offer applied-cost savings across the board. For P board applications, compliant TION PIN posts provide these features: Large gas-tight contact zone High reliability due to stored energy More resistant to damage to plated-through holes during installation Especially suited for multilayer P boards Less costly board manufacturing due to larger hole tolerances compared to use of solid pins pplication can be made by end-user Repairability contact can be replaced in the same pin location (two repairs) Installation with no heat cycling of board Permits mass insertion by minimizing forces needed to insert pins as compared to solid pin press-fit application Significant applied-cost savings in many applications Since compliant TION PIN posts do not have to be soldered, problems associated with solder are eliminated, such as: Faulty solder joints Solder fumes; contaminants are deposited on the contacts Solder spots; short circuits between printed circuits Flux residuals Thermal strain on printed circuit boards and components Degassing of plated-through holes Solderless press-fit interconnections using compliant pins are primarily integrated in, but not limited to, backplanes. Solderless press-fit interconnections are used in racks, especially where connectors must be fixed on the solder side of the P board and/or component side. In these applications, the holes for TION PIN post connectors are covered during the soldering process and press-fitting is performed after soldering. Other applications for TION PIN post interconnections include P boards that incorporate components using surface mount technology (SMT). Here, too, press-fit interconnections can be applied after soldering, thus eliminating complications associated with connectors suitable for surface mounting. Principle of the ompliant TION PIN Post When a compliant TION PIN post is inserted into a plated-through hole, two spring members are compressed, exerting force against the hole for a gas-tight connection. The diameter of the hole is smaller than the diagonal size of the pin (see cross-section illustration below). The beam characteristics of the pin are designed so that a plastic, as well as an elastic, deformation takes place during insertion. The two spring members compress to different degrees to accommodate hole tolerances. The compliant pin also reduces strain on the board. With a rigid pin, the elastic strain energy is stored entirely in the board, leading to damage of the plated-through holes. With the compliant TION PIN post, the residual force of the elastic deformation maintains stored energy to produce a tight contact zone between the pin and the plated-through hole. This maintains long-term electrical and mechanical reliability of the interconnection. Minimum Hole Dia..037 [0.94] Maximum Hole Dia..043 [1.09] ross-section rea of TION PIN Press-Fit Post in Printed ircuit oard Holes 10

67 TION PIN Press-Fit Posts (ontinued) TION PIN posts provide a more reliable press-fit connection. Localized pressure in the interface area provides oxide break-through and prevents corrosion better in many of the harshest environments to help provide a reliable connection. lso, radial and axial distortion are controlled to meet today s standards for multilayer board applications. P oard Thickness TION PIN posts are designed for use in a variety of P board thicknesses. However, certain TION PIN posts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thicknesses provided with the connector being used must be followed. ➄ ➁ ➀ ➃ ➂ ➀ nnular Ring (See Note) ➁ Drilled Hole ➂ opper Thickness ➃ Tin-lead Thickness ➄ Plated-Through Hole TION PIN Press-Fit Posts TION PIN Post/P oard pplications TION PIN ontact Drilled Hole Plating Thicknesses Plated-Through Distortion Specification* Material Thickness Diameter ➁ opper ➂ * Tin-lead ➃ Hole Diameter ➄ verage Maximum.02 [0.64].043 ±.001 [1.11 ±0.03 ] [ ].0003 [0.008]Min [ ].001 [0.038].002 [0.0] *Maximum hardness of copper layer is 10 Knoop. **Radial hole distortion. Note: Recommended annular ring diameter is hole diameter plus.020 [0.1]. 11

68 pplication Tooling for MPMODU Headers with TION PIN Posts pplication Tooling for TION PIN Posts TION PIN Post Replacement Tooling Rear Insertion/Extraction Tool No (Ref ) Includes: Impact Tool No Removal Tool No Replacement Tip No Single-Row onnector Seating Tools Tooling ssembly No is used to install single-row MPMODU headers with TION PIN posts into P boards. Pin headers with TION PIN posts allow high speed, solderless back-plane construction through press-fit application. Press fitting connectors to printed circuit boards requires special seating tools which transfer application force directly to the contacts. Force applied to the tool to seat the connectors can be provided by the Tyco Electronics seating machines shown on this page. For tooling information, call the Tyco Electronics utomation Group Double-Row onnector Seating Tools Header Size Tool (No. of Pos.) ssembly No Triple-Row onnector Seating Tools Header Size Tool (No. of Pos.) ssembly No MEP T SG Servo Electric Presses Tyco Electronics offers a wide range of servo-electric presses for the application of press-fit connectors. Systems are available with varying force capacity, board size capacity and process capability. Each system features real-time force feedback and P control to allow the highest level of control and traceability. Every connector pressed is monitored to confirm that maximum force is not exceeded and minimum force is met. Each system controls force, height and speed to allow termination of the pressing cycle by force or height parameters. omplete SP data is available as each connector press cycle is monitored and stored. Please see the matrix below and contact Tyco Electronics utomation Group at for assistance in understanding which system will best meet your needs. EP 6T Press Model MEP 3T MEP T MEP 6T MEP 12T EP 12T EP 6T Description Semi-automatic, benchtop servo-electric press Semi-automatic, benchtop servo-electric press Semi-automatic, stand-alone servo-electric press Semi-automatic, stand-alone servo-electric press utomatic, inline servo-electric press utomatic, stand alone servo-electric press Max Pressing Force Max oard Size (L x W) tons [kn] in [mm] 3 [26.7] 18 x 24 [460 x 610] [44.] 18 x 24 [460 x 610] 6 [3.4] 24 x 36 [610 x 914] 12 [106.8] 30 x 36 [ 762 x 914] 12 [106.8] 36 x 48 [914 x 1219] 6 [3.4] 30 x 36 [762 x 914] 12

69 pplication Tooling for Post Insertion Tyco Electronics offers a wide range of application tooling solutions ranging from stand alone manual insertion systems through fully automatic inline systems. Please contact your local Tyco Electronics representative or the Tyco Electronics Tooling ssistance enter at for help in finding the right solution to meet your particular requirements. Modular Insertion System ench Machine No This machine uses Tyco Electronics insertion heads to install a variety of printed circuit board products at rates of 2,000 per hour. The printed circuit board is placed in a oard Holding Fixture which is attached to a two-hand controlled mechanism. The operator moves the board over the machine anvil; a switch in the anvil actuates the machine when the printed circuit board is placed on the anvil. spotlight illuminates the insertion area. onsult Tyco Electronics for further information on this machine and the insertion heads. pplication Tooling for TION PIN Posts P300 and P30 utomatic Insertion Machines The P300 and P30 are automatic insertion machines for the application of reeled compliant pin and thru-hole products. Systems are available as stand alone or fully inline with SMEM compatible conveyor system. Up to 3 different insertion heads can be mounted on a system allowing one machine to apply up to 3 different products. Insertion rates of up to 3 insertions per second on the P300 and up to insertions per second on a P30 are possible (application dependent). Ps up to 1." x 23." [400x600mm] on the P300 and up to 17." x 17." [40x40mm] on the P30 can be processed by high speed XY positioning tables. wide range of options, including force monitoring, P vision correct, and P thickness measurement are available to meet your performance and production flexibility requirements. 13

70 METRI Dimensions are millimeters over inches TION PIN Stacking onnector System (Non-Intermateable with MPMODU onnectors) Product Facts an stack multiple printed circuit boards without the need of a mother board onnect bus lines in the shortest possible distance Receptacle assembly has TION PIN posts for solderless board mounting an be mounted onto the board simply by press fitting with Mini-Press Receptacle assembly is easy to service and replace (up to 2 times) Receptacle contacts are of fork design to mate with posts at two points. Virtually eliminates danger of scooping at mating/ unmating Stacking dimensions are 13.4 [.28] or 19.0 [.748] when using receptacle assemblies together, and 13.9 [.47] or 19. [.768] when using a combination of receptacle and post header assemblies ccepts 1.6 [.062] thick boards Housing provided with polarization to help prevent mismating Housing made of chemicalresistant glass-filled PT, black in color ontacts are of copper alloy material with high spring characteristics, gold-overnickel plated Post hood available to protect the post portion of receptacle contacts. an be selected depending on stacking dimensions onnectors available in sizes of 26, 30, 34, 40, 0 and 60 positions Product specification: TION PIN Stacking onnector System TION PIN Stacking onnectors are a family of two-piece connectors used to stack multiple printed circuit boards in parallel. They have been developed to provide a more reliable and economical means of compact wiring and highdensity packaging inside a variety of electronic equipment. The connectors have many advanced features: they can be used to connect bus lines in the shortest possible distance without the need of a mother board, thus permitting effective utilization of space above the board; compared with other methods of jumper connection using cable connectors, they make the overall board layout more clean and straight for compact packaging. ontacts are on 2.4 x 2.4 [ x ] grid. The connectors are available in sizes of 26, 30, 34, 40, 0 and 60 positions. TION PIN Stacking onnectors consist of a receptacle assembly, a mating post header and a post hood to protect the post portion of the receptacle assembly. complete description of the TION PIN Stacking onnectors is presented on the following page (1). 14

71 METRI Dimensions are millimeters over inches TION PIN Stacking onnector System (Non-Intermateable with MPMODU onnectors) (ontinued) Typical pplication Receptacle ssembly The receptacle assembly features reliability and economy characteristic of this product line. The mating portion of its built-in receptacle contacts is a fork design, highly resilient and helps prevent damage to contacts by scooping at mating/ unmating. On the board mount side of the assembly are 0. [.022] square TION PIN posts. No soldering is required to mount the assembly on the board, the posts being simply, press fit into the board s 0.82 [.032] diameter holes. Two types of receptacle assemblies are available; one is used with an outermost board and the other with intermediary boards. solder version is also available for the outer board mount assembly. Post Hood When using the intermediary board mount receptacle assembly, this post hood is used to protect the post portion of the assembly. The post hood is available in two types: one with the housing height of 10.0 [.394] and the other with the housing height of 1.7 [.618]. They can be selected, depending on stacking dimensions. Post Header The post header is mounted onto the outer board on the other side of the board to which an outer board mount receptacle assembly is applied. The post header is preloaded with 0.0 [.022] square soldering posts. These posts are protected by the side walls of the housing. Stacking dimensions provided by this connector line are as follows: When the outer board receptacle and intermediary board receptacle assemblies are used 13.4 [.28] or 19.0 [.748]. When the intermediary board receptacle assembly and the post header assembly are used 13.9 [.47] or 19. [.768]. TION PIN Stacking onnector System Receptacle ssembly (For outer board) (TION PIN Type) Part No.: Post Hood Part No.: P oard 1.6 [.062] thickness Stacking Dim [.28], 19.0 [.748] Receptacle + Receptacle Receptacle ssembly (For inner board) (TION PIN Type) Part No.: P oard 1.6 [.062] thickness Post Header (Solder Type) Part No.: Stacking Dim [.47], 19. [.768] Receptacle + Post P oard 1.6 [.062] thickness 1

72 METRI Dimensions are millimeters over inches Post Hood (Non-Intermateable with MPMODU onnectors) 2.4 [] Pitch X Y Y 0.7 [.030] Hole Dia. The post hood, mounted onto the post of the intermediary receptacle assembly, protects the post and serves as a header assembly when stacking several boards. Material lack glass-filled PT, 94V-0 rated 8.9 [.30] 2.4 [] * X 10.0 [.394] Section X-X 0.6* [.024] Hole Dia. Section Y-Y Stacking onnectors, Post Hood cceptable No. of Dimensions (See Note.) Post Hood Post Length Pos. Part Nos. For [1.00] [1.200] 10.0 [.394] [.30] [1.700] 33.6 [1.321] 10.0 [.394] or [1.900] [1.600] 10.0 [.394] [.429] 40.9 [2.200] [1.900] 10.0 [.394] (For Stacking Dimension) [2.700] 6.96 [2.97] 10.0 [.394] [.28] [3.200] [2.900] 10.0 [.394] [1.00] [1.200] 1.6 [.614] For 14. [.71] [1.700] 33.6 [1.321] 1.6 [.614] or [1.900] [1.600] 1.6 [.614] [.60] [2.200] [1.900] 1.6 [.614] (For Stacking Dimension) * 19.0 [.748] [2.700] 6.96 [2.97] 1.6 [.614] [3.200] [2.900] 1.6 [.614] *0.60 [.024] dia. applies to 16 holes on both sides, except Part No

73 METRI Dimensions are millimeters over inches Receptacle ssemblies with TION PIN Posts and Solder Posts (Non-Intermateable with MPMODU onnectors) Receptacle ssembly for Outer oard (With 0. [.022] Square Post) 7.6 [.300] 2.4 [] Y Y 0. [.020] 16. [.60] lank width 0.69** [.027] 2.4 [] Pitch X 3.7 [.146] 6.4 [.22] ontact rea 3.7 [.146] 6.4 [.22] 2.4 [] ontact rea 11.9 [.469] 0. [.020] 0. [.020] Housing lack glass-filled PT, 94V-0 rated ontacts opper alloy, plated [ ] gold on contact area and post mating area, gold flash on TION PIN tail or [ ] tin on solder tail, with entire contact underplated [.00000] nickel pplication Tooling shown on page 162. P oard Mounting Dimensions Thru hole plating opper [ ] Finished hole dia ±0.0 [.032 ±.002 ] Finished hole dia. 0.8 ±0.0 [.031 ±.002 ] TION PIN Post Land dia. 1.4 [.0] Min. oard Thick 1.6 [.062] P drill hole 0.9 ±0.02 [.03 ±.0001 ] oard Thick 1.6 [.062] For Outer oard X 2.4 [] Pitch Section Y-Y 2.4 ±0.1 [ ±.004 ] TION PIN rea Mating rea 2.4 ±0.1 [ ±.004 ] ±0.1 [±.004] Recommended P oard Hole Layout 2.4 [] Section X-X Solder Type 2.4 [] Post No. of Dimensions (See Note.) Receptacle Type Length ssembly L Pos. Part Nos [1.402] [1.200] [1.98] 3.6 [1.400] TION PIN [1.799] [1.600] * Post [2.098] [1.900] [2.98] [2.400] [3.098] [2.900] [1.402] [1.200] [1.98] 3.6 [1.400] [1.799] [1.600] Solder Post 4.2* [2.098] [1.900] [2.98] [2.400] [3.098] [2.900] ** **fter mounted receptacle assembly is on board, dimension of extrude length from board is 2.6 [.102]. **Post Length = 17.0 [.669], lank Width = 0.69 [.027] (see above figure) (finished hole dia. = 1.0 [.039]). L Section X-X TION PIN Type L Stacking onnectors, Receptacles Solder Post 17

74 METRI Dimensions are millimeters over inches Receptacle ssemblies with TION PIN Posts (Non-Intermateable with MPMODU onnectors) Receptacle ssembly for Inner oard (With 0. [.022] Square Post) 2.4 [] Y Y 7.6 [.300] 2.4 [] Pitch X 3.7 [.146] 6.4 [.22] ontact rea Housing lack glass-filled PT, 94V-0 rated ontacts opper alloy, plated [ ] gold on contact area and post mating area, gold flash on TION PIN tail or [ ] tin on solder tail, with entire contact underplated [.00000] nickel 11.9 [.469] X Mating rea TION PIN rea 0. [.020] L Stacking onnectors, Receptacles pplication Tooling shown on page 162. P oard Mounting Dimensions 2.4 [] Pitch Section Y-Y Section X-X 2.4 [] Thru hole plating opper [ ] Land dia. 1.4 [.0] Min. oard Thick 1.6 [.062] 2.4±0.1 [±.004] 2.4±0.1 [±.004] [±.004] ±0.1 Recommended P oard Hole Layout Finished hole dia ±0.0 [.032 ±.002 ] P drill hole 0.9 ±0.02 [.03 ±.0001 ] For Inner oard Stacking Dimensions 13.4 [.28] Post No. of Dimensions (See Note.) Receptacle Length ssembly L Pos. Part Nos [1.98] 3.6 [1.400] [1.799] [1.600] [2.098] [1.900] * [2.98] [2.400] [3.098] [2.900] [1.402] [1.200] [1.98] 3.6 [1.400] [1.799] [1.600] [2.098] [1.900] [2.98] [2.400] [3.098] [2.900] *ontact area and post mating area: [ ] min. gold over [.00000] min. nickel plated. 18

75 METRI Dimensions are millimeters over inches Receptacle ssemblies with TION PIN Posts (Non-Intermateable with MPMODU onnectors) (ontinued) For Inner oard (ontinued) Stacking Post No. of Dimensions (See Note.) Receptacle Dimensions Length ssembly L Pos. Part Nos [1.402] [1.200] [1.98] 3.6 [1.400] [.71] [1.799] [1.600] [2.098] [1.900] [2.98] [2.400] [.748] [3.098] [2.900] [1.402] [1.200] [1.98] 3.6 [1.400] [.60] [1.799] [1.600] [2.098] [1.900] [2.98] [2.400] [3.098] [2.900] *ontact area and post mating area: [ ] min. gold over [.00000] min. nickel plated. Stacking onnectors, Receptacles 19

76 METRI Dimensions are millimeters over inches Post Headers with Solder Posts (Non-Intermateable with MPMODU onnectors) Post Header (With 0. [.022] Square Post) 2.4 [] 2.4 [] Pitch Y Y 8.9 [.30] Housing lack glass-filled PT, 94V-0 rated Posts opper alloy, plated [ ] gold on contact area, [ ] min. tin on solder tail, with entire post underplated [.00000] nickel 3.7 [.146] X X 2.4 [] Pitch L 8. [.33] 0. [.020] Stacking onnector Post Headers P oard Mounting Dimensions Finished hole dia. 0.8 ±0.06 [.031 ±.002 ] oard Thick 1.6 [.062] 2.4±0.1 [±.004] Section Y-Y 2.4±0.1 [±.004] ±0.1 [±.004] Recommended P oard Hole Layout Section X-X Stacking Dimensions Post Length L No. of Dimensions (See Note.) Part Nos. of Post Header Pos. ssembly [1.00] [1.200] 10. [.413] [1.700] 3.6 [1.400] 10. [.413] [1.900] [1.600] 10. [.413] [.228] [2.200] [1.900] 10. [.413] * [2.700] [2.400] 10. [.413] [.47] [3.200] [2.900] 10. [.413] [1.00] [1.200] 10. [.413] [1.700] 3.6 [1.400] 10. [.413] [1.900] [1.600] 10. [.413] [.307] [2.200] [1.900] 10. [.413] * [2.700] [2.400] 10. [.413] [3.200] [2.900] 10. [.413] *ontact mating area: [ ] min. gold over [.00000] min. nickel plated. 160

77 METRI Dimensions are millimeters over inches Post Headers with Solder Posts (Non-Intermateable with MPMODU onnectors) (ontinued) Stacking Dimensions Post Length L No. of Dimensions (See Note.) Part Nos. of Post Header Pos. ssembly [1.00] [1.200] 16.1 [.634] [1.700] 3.6 [1.400] 16.1 [.634] [.449] [1.900] [1.600] 16.1 [.634] [2.200] [1.900] 16.1 [.634] [2.700] [2.400] 16.1 [.634] [.768] [3.200] [2.900] 16.1 [.634] [1.00] [1.200] 16.1 [.634] [1.700] 3.6 [1.400] 16.1 [.634] [.28] [1.900] [1.600] 16.1 [.634] [2.200] [1.900] 16.1 [.634] [2.700] [2.400] 16.1 [.634] [3.200] [2.900] 16.1 [.634] *ontact mating area: [ ] min. gold over [.00000] min. nickel plated. Stacking onnector Post Headers 161

78 pplication Tooling for TION PIN Stacking onnectors Mini-Press 1. Insert connector into the board tentatively (e sure that connector is in the right direction). 2. ttach insertion support plate to the leg portion of connector from below. pplication Tooling for TION PIN Stacking onnectors No. of Pos. Part No The part numbers above include the Mini-Press unit, insertion support plate and press-fit jig. Mini-Press Unit Part No When ordering a press-fit jig only, consult the table below. Press-fit Jig (separate order) No. of Pos. Part No lso, optional insertion support plates are obtainable by separate order to meet your specific requirements for improved board handling. 3. Set insertion support plate in place by butting it against Mini-Press platform.. Press handle down gently and insert connector into the board. 4. y pressing Mini-Press handle down, rest the press-fit jig against connector. 6. Now connector has been mounted to the board securely. Insertion Support Unit (Option) 162

79 .02 [0.64] Square Posts andolier Posts (Uninsulated) andolier rass Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] tin over [ ] nickel on entire post Related Product Data Mateable onnectors Refer to the Mating Post Selection Guide page 90 ccessories End Shrouds page 203 pplication Tooling page 13 Technical Documents page 276 See mating connector for applicable product and application specifications. Strip Form Posts (Uninsulated).010 [0.2] *.010 L [0.2].070 of Star [1.78] andolier Localized Gold Plate rea Post Recommended Plated Hole Size for Tin Plated Through Hole.020 P Pad [0.1] ustomer oard [ ].097 [2.46] Max. Dimensions Post Plating/Part Nos. andolier D Plating Plating Plating Insertion Head.33 [8.97].071 [1.80].424 [10.77].034 [0.86] [8.08].071 [1.80].389 [9.88].034 [0.86] [6.86].071 [1.80].341 [8.66].034 [0.86] [0.79] [4.6].097 [2.46].280 [7.11].031 [0.79] Notes: 1. Posts can be applied using Hand Tool *Point of measurement for plating thickness. 2. pproximate posts per reel 30, The andolier Insertion head can be used on the omp-u-sertor II machine or the Modular Insertion System ench machine (see page 13). 4. For P finishes other than tin, contact Tyco Electronics. *.042 [1.07].01 [0.38].080 [2.03] P Pad D ±.002 [±0.0].036±.002 [0.91±0.0] Recommended Plated Hole Size for Tin Plated Through Hole Dia. Square Posts andolier and Strip Form Localized Tin Plate rea.020 [0.1].00 [1.27] ustomer oard Posts Phosphor bronze, plated as follows: Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating Duplex plated [ ] gold on contact area, [ ] tin on solder area, with entire post underplated [ ] nickel Plating [ ] gold over [ ] nickel on entire post Plating D [ ] tin over [ ] nickel on entire post Dimensions Post Plating/Part Nos. Post/Tab Plating Plating Plating Plating D Insertion Head.210 [.33].227 [.77].437 [11.10] [7.06].16 [4.19].443 [11.2] [7.06].284 [7.21].62 [14.27] [7.06].738 [18.7] [2.81] [8.08].16 [4.19].483 [14.27] Notes: 1. pproximate Posts per reel 20,000. *Point of measurement for plating thickness. 2. Other post lengths are available, consult Tyco Electronics. 3. The Post/Tab Insertion Head can be used on the omp-u-sertor II machine or the Modular Insertion System ench machine (see page 13). 4. For P finishes other than tin, contact Tyco Electronics. 163

80 MPMODU.02 [0.64] Square ontinuous Posts Features of.02 [0.64] Square ontinuous Posts rass drawn wire for posts.400 to [10.16 to 2.40] overall pin length (.010 [0.2] increments) Plating Options: Tin 1µ in. gold 30µ in. gold Star feature also available enefits Less expensive than bandolier style posts an be placed on printed circuit boards at any desired centerline Less scrap material (no carrier strip).02 Square ontinuous Posts Technical Documents page 276 pplication Specification Tyco Electronics now offers MPMODU.02 [0.64] Square ontinuous Posts. These posts can be used instead of the original posts that come on a bandolier style carrier strip. These posts are on a reel, but the posts are notched at the desired length (no carrier strip is needed). This feature allows more versatility by providing post lengths from.400 to [10.16 to 2.40], available in increments of.010 [0.2]. The posts are brass drawn wire and are inserted into a printed circuit board via application tooling at any centerline configuration. They can be used for wire wrap applications or mated to a receptacle. The current rating is 3 amps. The posts are available plated with tin, 1µ in. gold, or 30µ in. gold. Other platings are available upon request. Tyco Electronics application tooling is a modular head (Part Number ) placed on the Modular Insertion System ench Machine (Part Number ) 164

81 MPMODU.02 [0.64] Square ontinuous Posts (ontinued) Pre-Plated Tin Part Number Description Square Square with Star Post Length [10.16] [10.41] [10.67] [10.92] [11.18] [11.43] [11.68] [11.94] [12.19] [12.4] [12.70] [12.9] [13.21] [13.46] [13.72] [13.97] [14.22] [14.48] [14.73] [14.99] [1.24] Part Number Description Square Square with Star Post Length [1.49] [1.7] [16.00] [16.26] [16.1] [16.76] [17.02] [17.27] [17.3] [17.78] [18.03] [18.29] [18.4] [18.80] [19.0] [19.30] [19.6] [19.81] [20.07] [20.32] [20.7] Part Number Description Square Square with Star Post Length [20.83] [21.08] [21.34] [21.9] [21.84] [22.10] [22.3] [22.61] [22.86] [23.11] [23.37] [23.62] [23.88] [24.13] [24.38] [24.64] [24.89] [2.1] [2.40] Pre-Plated 1µ in. Gold Part Number Description Square Square with Star Post Length [10.16] [10.41] [10.67] [10.92] [11.18] [11.43] [11.68] [11.94] [12.19] [12.4] [12.70] [12.9] [13.21] [13.46] [13.72] [13.97] [14.22] [14.48] [14.73] [14.99] [1.24] Part Number Description Square Square with Star Post Length [1.49] [1.7] [16.00] [16.26] [16.1] [16.76] [17.02] [17.27] [17.3] [17.78] [18.03] [18.29] [18.4] [18.80] [19.0] [19.30] [19.6] [19.81] [20.07] [20.32] [20.7] Part Number Description Square Square with Star Post Length [20.83] [21.08] [21.34] [21.9] [21.84] [22.10] [22.3] [22.61] [22.86] [23.11] [23.37] [23.62] [23.88] [24.13] [24.38] [24.64] [24.89] [2.1] [2.40].02 Square ontinuous Posts Pre-Plated 30µ in. Gold Part Number Description Square Square with Star Post Length [10.16] [10.41] [10.67] [10.92] [11.18] [11.43] [11.68] [11.94] [12.19] [12.4] [12.70] [12.9] [13.21] [13.46] [13.72] [13.97] [14.22] [14.48] [14.73] [14.99] [1.24] Part Number Description Square Square with Star Post Length [1.49] [1.7] [16.00] [16.26] [16.1] [16.76] [17.02] [17.27] [17.3] [17.78] [18.03] [18.29] [18.4] [18.80] [19.0] [19.30] [19.6] [19.81] [20.07] [20.32] [20.7] Part Number Description Square Square with Star Post Length [20.83] [21.08] [21.34] [21.9] [21.84] [22.10] [22.3] [22.61] [22.86] [23.11] [23.37] [23.62] [23.88] [24.13] [24.38] [24.64] [24.89] [2.1] [2.40] 16

82 MPMODU.04 [1.14] Square ontinuous Posts Features of.04 [1.14] Square ontinuous Posts rass drawn wire for posts.400 to [10.16 to 2.40] overall pin length (.010 [0.2] increments) Plating Options: Tin 1µ in. gold 30µ in. gold Star feature also available enefits Less expensive than bandolier style posts an be placed on printed circuit boards at any desired centerline Less scrap material (no carrier strip).04 Square ontinuous Posts Technical Documents page 276 pplication Specification Tyco Electronics now offers MPMODU.04 [1.14] Square ontinuous Posts. These posts can be used instead of the original posts that come on a bandolier style carrier strip. These posts are on a reel, but the posts are notched at the desired length (no carrier strip is needed). This feature allows more versatility by providing post lengths from.400 to [10.16 to 2.40], available in increments of.010 [0.2]. The posts are brass drawn wire and are inserted into a printed circuit board via application tooling at any centerline configuration. They can be used for wire wrap applications or mated to a receptacle. Potential industries include: building systems, commercial/home equipment, household appliances, home power tools and equipment. The current rating is 7 amps. The posts are available plated with tin, 1µ in. gold, or 30µ in. gold. Other platings are available upon request. Tyco Electronics application tooling is a modular head (Part Number ) placed on the Modular Insertion System ench Machine (Part Number ) 166

83 MPMODU.04 [1.14] Square ontinuous Posts (ontinued) Pre-Plated Tin Part Number Description Square Square with Star Post Length [10.16] [10.41] [10.67] [10.92] [11.18] [11.43] [11.68] [11.94] [12.19] [12.4] [12.70] [12.9] [13.21] [13.46] [13.72] [13.97] [14.22] [14.48] [14.73] [14.99] [1.24] Part Number Description Square Square with Star Post Length [1.49] [1.7] [16.00] [16.26] [16.1] [16.76] [17.02] [17.27] [17.3] [17.78] [18.03] [18.29] [18.4] [18.80] [19.0] [19.30] [19.6] [19.81] [20.07] [20.32] [20.7] Part Number Description Square Square with Star Post Length [20.83] [21.08] [21.34] [21.9] [21.84] [22.10] [22.3] [22.61] [22.86] [23.11] [23.37] [23.62] [23.88] [24.13] [24.38] [24.64] [24.89] [2.1] [2.40] Pre-Plated 1µ in. Gold Part Number Description Square Square with Star Post Length [10.16] [10.41] [10.67] [10.92] [11.18] [11.43] [11.68] [11.94] [12.19] [12.4] [12.70] [12.9] [13.21] [13.46] [13.72] [13.97] [14.22] [14.48] [14.73] [14.99] [1.24] Part Number Description Square Square with Star Post Length [1.49] [1.7] [16.00] [16.26] [16.1] [16.76] [17.02] [17.27] [17.3] [17.78] [18.03] [18.29] [18.4] [18.80] [19.0] [19.30] [19.6] [19.81] [20.07] [20.32] [20.7] Part Number Description Square Square with Star Post Length [20.83] [21.08] [21.34] [21.9] [21.84] [22.10] [22.3] [22.61] [22.86] [23.11] [23.37] [23.62] [23.88] [24.13] [24.38] [24.64] [24.89] [2.1] [2.40].04 Square ontinuous Posts Pre-Plated 30µ in. Gold Part Number Description Square Square with Star Post Length [10.16] [10.41] [10.67] [10.92] [11.18] [11.43] [11.68] [11.94] [12.19] [12.4] [12.70] [12.9] [13.21] [13.46] [13.72] [13.97] [14.22] [14.48] [14.73] [14.99] [1.24] Part Number Description Square Square with Star Post Length [1.49] [1.7] [16.00] [16.26] [16.1] [16.76] [17.02] [17.27] [17.3] [17.78] [18.03] [18.29] [18.4] [18.80] [19.0] [19.30] [19.6] [19.81] [20.07] [20.32] [20.7] Part Number Description Square Square with Star Post Length [20.83] [21.08] [21.34] [21.9] [21.84] [22.10] [22.3] [22.61] [22.86] [23.11] [23.37] [23.62] [23.88] [24.13] [24.38] [24.64] [24.89] [2.1] [2.40] 167

84 Receptacle ssemblies, Horizontal Mount Horizontal Mount, Receptacle ssemblies Product Facts ll receptacle assemblies are end stackable ontact design employs dual cantilever beams with built-in anti-overstress feature losed entry housings help prevent post stubbing Wide range of sizes available Other versions available upon request Housings made of high temperature, surface mount compatible thermoplastic material, 94V-O rated Duplex gold and matte tin plated contacts have full nickel underplate Housings feature P board standoffs Solder tails accommodate a P board thickness of.062 [1.7] Recognized under the omponent Program of Underwriters Laboratories Inc., R File No. E28476 ertified by anadian Standards R ssociation, File No. LR 7189 Horizontal Mount receptacle assemblies are designed to reliably and economically meet the packaging and interconnection requirements of today s electronics industry, generally for applications using the mother/daughter board arrangement. This product line is offered in both single and double row configurations. The centerline assemblies are available in a wide range of position sizes. They have end stacking capability which gives the added advantage of flexibility. The housings are made of high temperature, surface mount compatible thermoplastic material that is 94V-0 rated. ontacts are phosphor bronze, fully underplated with nickel to help prevent corrosion and are available in three plating options. The receptacle contact is an established proven design with a fully enclosed, one-piece box to protect the contact area. In addition, the receptacle contact has dual cantilever beams with a built-in anti-overstress feature. Standard solder tails accommodate a board thickness of.062 [1.7]. Performance haracteristics 168 Mechanical haracteristics Mating Force 6.0 oz. [1.67N] per contact (max.) Unmating Force.7 oz. [0.21N] per contact (min.) during third mating cycle Durability 200 cycles Environmental haracteristics Operating Temperature -6 to +12 Electrical haracteristics urrent Rating 3.0 amperes (max.) for single contact; 2.0 amperes (max.) per contact when connector is fully energized ontact Resistance 12 milliohms (max.) Insulation Resistance 000 megohms (min.) between adjacent contacts Dielectric Withstanding Voltage (at sea level) 70 V rms

85 Mod II Receptacle ssemblies, Single-Row, enterline losed Entry, End Stackable, Short Point-of-ontact, with Standoffs.320 [8.13].00 [1.27] (2 Plc.).174 Max. [4.42] (Point-of-ontact) Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 168 Technical Documents page 276 Product Specification pplication Specification dditional receptacle assembly sizes are available; minimum order quantities may apply. onsult Tyco Electronics. Keying Plug Part No (Plugs into receptacle contact) Material Natural color nylon.137 [3.48] 1 2 Pos. Ref. P oard (Ref.).03 ±.003 [0.89 ±0.08 ] Dia. *.069 [1.7] Recommended P oard Hole Layout (for.062 [1.7] thick P board) Post Entry.11 [2.92].12 [3.18] (Localized Gold Plate rea) L.310 [7.87] *±.003 [±0.08] tolerances not to accumulate within one connector pattern [ ] L.310 [7.87] No. of Dimensions ontact Plating/Part Nos. Pos. Plating Plating Plating [.08] [7.62].200 [.08] [10.16].300 [7.62] [12.70].400 [10.16] [1.24].00 [12.70] [17.78].600 [1.24] [20.32].700 [17.78] [22.86].800 [20.32] [2.40].900 [22.86] [27.94] [2.40] [30.48] 1 [27.94] [33.02] [30.48] [3.6] [33.02] [38.10] [3.6] [40.64] 1.00 [38.10] [43.18] [40.64] [4.72] [43.18] [48.26] [4.72] [0.80] [48.26] [76.20] [73.66] [101.60] [99.06] Note: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 169 Horizontal Mount, Receptacle ssemblies

86 Mod II Receptacle ssemblies, Double-Row, x [2.4 x 2.4] enterlines losed Entry, End Stackable, Short Point-of-ontact, with Standoffs.320 [8.13].00 [1.27] (2 Plc.).174 Max. [4.42] (Point-of-ontact) Post Entry.238 [6.0].118 [3.00] (Localized Gold Plate rea) Horizontal Mount, Receptacle ssemblies Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 168 Technical Documents page 276 Product Specification pplication Specification dditional receptacle assembly sizes are available; minimum order quantities may apply. onsult Tyco Electronics. 1 2 Pos. Ref. P oard (Ref.).03 ±.003 [0.89 ±0.08 ] Dia..069 [1.7] *.11 [2.92].12 [3.18] (Localized Gold Plate rea).310 [7.87] Recommended P oard Hole Layout (for.062 [1.7] thick P board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. L [7.87] No. of Dimensions ontact Plating/Part Nos. Pos. Plating Plating Plating [.08] [7.62].200 [.08] [10.16].300 [7.62] [12.70].400 [10.16] [1.24].00 [12.70] [17.78].600 [1.24] [20.32].700 [17.78] [22.86].800 [20.32] [2.40].900 [22.86] [27.94] [2.40] [30.48] 1 [27.94] [33.02] [30.48] [3.6] [33.02] [38.10] [3.6] [40.64] 1.00 [38.10] [43.18] [40.64] [4.72] [43.18] [48.26] [4.72] [0.80] [48.26] [63.0] [60.96] [76.20] [73.66] Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies [6.0] minimum positive pin stop to prevent shorting between row. [ ] L 170

87 Mod II Surface Mount Horizontal Receptacle ssemblies, x [2.4 x 2.4] enterline Product Facts Surface mount leads ll receptacle assemblies are end stackable ontact design employs dual cantilever beams with built-in anti-overstress feature losed entry housings help prevent post stubbing Housings made of high temperature, surface mount compatible thermoplastic material, 94 V-0 rated Duplex gold and matte tin plated contacts have full nickel underplate Housings feature P board standoffs Recognized under the omponent Program of Underwriters Laboratories Inc., R File No. E28476 ertified by anadian Standards R ssociation, File No. LR 7189 Horizontal surface mount receptacle assemblies are designed to reliably and economically meet the packaging and interconnection requirements of today s electronics industry as process technologies evolve from wave soldering to surface mount processing. This broad product line is offered in both single and double row configurations. The centerline assemblies are available in 2-40 (single row) positions and 4-80 (double row) positions. Housings are end stackable, which gives the advantage of added flexibility. The housings are made of high temperature material that is 94V-0 rated. ontacts are phosphor bronze, fully underplated with nickel to help prevent corrosion and are available in three plating options. The receptacle contact is an established proven design, with a fully enclosed one-piece "box" to protect the contact beams with built-in anti-overstress feature. Horizontal Mount, Receptacle ssemblies Performance haracteristics Mechanical haracteristics Mating Force 6.0 oz. [1.67N] per contact (max.) Unmating Force.7 oz. [0.21N] per contact (min.) during third mating cycle Durability 200 cycles Environmental haracteristics Operating Temperature -6 to +12 Electrical haracteristics urrent Rating 3.0 amperes (max.) for single contact; 2.0 amperes (max.) per contact when connector is fully energized ontact Resistance 12 milliohms (max.) Insulation Resistance 000 megohms (min.) between adjacent contacts Dielectric Withstanding Voltage (at sea level) 70 V rms 171

88 Mod II Receptacle ssemblies, Single-Row, Surface Mount enterline losed Entry, End Stackable, Short Point-of-ontact, with Standoffs.320 [8.13] Horizontal Mount, Receptacle ssemblies Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel.137 [3.48] [0.20] [0.13].36 [9.04] Pos. No. Ref. X X.060 [1.2].069 [1.7].00 [1.27].388±.010 [9.8±0.2] Section X X.174 Max. [4.42] (Point-of-ontact).12 [3.18] (Localized Gold Plate rea) Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 171 Technical Documents page 276 Product Specification pplication Specification dditional receptacle assembly sizes are available; minimum order quantities may apply. onsult Tyco Electronics. Keying Plug Part No (Plugs into receptacle contact).090 [2.29] Recommended Etched ircuit Layout (for.040 [1.02] min. thick P oard;.008 [0.20] thick stencil) No. of Dimension ontact Plating/Part Nos. Pos. Plating Plating Plating [.08] [7.62] [10.16] [12.70] [1.24] [17.78] [20.32] [22.86] [2.40] [27.94] [30.48] [33.02] [3.6] [38.10] [40.64] [43.18] [4.72] [48.26] [0.80] [76.20] [101.60] Material Natural color nylon

89 Mod II Receptacle ssemblies, Double-Row, Surface Mount enterline losed Entry, End Stackable, Short Point-of-ontact, with Standoffs.320 [8.13] Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 171 Technical Documents page 276 Product Specification pplication Specification dditional receptacle assembly sizes are available; minimum order quantities may apply. onsult Tyco Electronics. Note: ll part numbers are RoHS compliant [0.20] [0.13].36 [9.04] No. of Dimension ontact Plating/Part Nos. Pos. Plating Plating Plating [.08] [7.62] [10.16] [12.70] [1.24] [17.78] [20.32] [22.86] [2.40] [27.94] [30.48] [33.02] [3.6] [38.10] [40.64] [43.18] [4.72] [48.26] [0.80] [63.0] [76.20] [1.7].00 [1.27] Ref..238 [6.0].060 [1.2].090 [2.29] Recommended Etched ircuit Layout (for.040 [1.02] min thick P oard;.008 [0.20] thick stencil).26 [6.1] Post Stop.388±.010 [9.8±0.2].174 [4.42] Max. (Point-of-ontact).118 [3.00] (Localized Gold Plate rea).12 [3.18] (Localized Gold Plate rea) 173 Horizontal Mount, Receptacle ssemblies

90 Receptacle ssemblies, Vertical Mount Vertical Mount, Receptacle ssemblies Product Facts Dual-cantilever beam contact with box design Single-row assemblies have centerline contact spacing; double-row assemblies have x [2.4 x 2.4] centerline contact spacing 3 through 40 positions in single-row assemblies; 2 through 80 positions in double-row assemblies Mod II Standard.340 [8.64] and Mod IV low.26 [6.73] profiles Mod II and Mod IV profiles available in dual entry Duplex gold and matte tin plated contacts have full nickel underplate Thermoplastic housings, 94V-0 rated Standoffs for easy flux cleaning ll throughhole assemblies are end stackable Recognized under the omponent Program of Underwriters Laboratories Inc., R File No. E28476 ertified by anadian Standards R ssociation, File No. LR 7189 Vertical receptacle assemblies are designed to reliably and economically meet the packaging and interconnection requirements of today s electronics industry. This broad product line offers a wide variety of assembly styles and features. They are available in dual entry style, in both single and double row configurations. The centerline assemblies are available in 3-40 (single row) positions and 2-80 (double row) positions. Standard and low profile housings which are end stackable also enhance the product line giving the advantage of added flexibility. The housings are made of flame retardant material that is 94 V-0 rated. ontacts are phosphor bronze, fully underplated with nickel to help prevent corrosion and are available in three plating options. The receptacle contact is an established proven design, with a fully enclosed one-piece box to protect the contact beams. These assemblies are offered in.26 [6.73] (Mod IV) and.340[8.64] (Mod II) high profiles. Standard solder tails accommodate board thickness of.062 [1.7]. Product styles include single and dual tine variations. Outrigger tine styles are also available for bottom entry parallel board stacking applications. 174 Performance haracteristics Mechanical haracteristics Mating Force 9.0 oz. [2.N] per contact (max.) Unmating Force 1. oz. [0.42N] per contact (min.) Durability (Tested to) 200 cycles Environmental haracteristics Operating Temperature -6 to +12 Electrical haracteristics urrent Rating 3.0 amperes (max.) for single contact; 2.0 amperes (max.) per contact when connector is fully energized ontact Resistance 12 milliohms (max.) Insulation Resistance 000 megohms (min.) between adjacent contacts Dielectric Withstanding Voltage (at sea level) 70 V rms

91 Mod II Receptacle ssemblies, Single-Row, enterline losed Top Entry, End Stackable, with Single Tine ontacts X.020 [0.1] (Standoffs).340 [8.64] X Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel.140 [3.6] ±.003 [2.4±0.08].00 [1.27] Max..148 [3.76].107 [2.72] (Localized Gold Plate rea) Recommended P oard Hole Layout.03±.003 [0.89±0.08] Point of ontact Dia..11 [2.92] Ref. Vertical Mount, Receptacle ssemblies Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 174 Technical Documents page 276 Product Specification pplication Specification dditional receptacle assembly sizes are available; minimum order quantities may apply. onsult Tyco Electronics. Keying Plug Part No (Plugs into receptacle contact) Material Natural color nylon No. of Dimensions ontact Plating/Part Nos. Pos. Plating Plating Plating [7.62].200 [.08] [10.16].300 [7.62] [12.70].400 [10.16] [1.24].00 [12.70] [17.78].600 [1.24] [20.32].700 [17.78] [22.86].800 [20.32] [2.40].900 [22.86] [27.94] [2.40] [30.48] 1 [27.94] [33.02] [30.48] [3.6] [33.02] [38.10] [3.6] [40.64] 1.00 [38.10] [43.18] [40.64] [4.72] [43.18] [48.26] [4.72] [0.80] [48.26] [76.20] [73.66] [101.60] [99.06] Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add.020 [0.1] (not including the post lead in chamfer) to the maximum point-of-contact dimension. 17

92 Mod II Receptacle ssemblies, Double-Row, x [2.4 x 2.4] enterline losed Top Entry, Side and End Stackable x [2.4 x 2.4] enterline, Tine Spacing.020 [0.1] (Standoffs) Vertical Mount, Receptacle ssemblies No. 176 Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 174 Technical Documents page 276 Product Specification pplication Specification dditional receptacle assembly sizes are available; minimum order quantities may apply. onsult Tyco Electronics. Keying Plug Part No (Plugs into receptacle contact) Material Natural color nylon.00 [1.27] Max..198 [.03] of Dimensions ontact Plating/Part Nos. Pos. Plating Plating Plating [.08] [7.62].200 [.08] [10.16].300 [7.62] [12.70].400 [10.16] [1.24].00 [12.70] [17.78].600 [1.24] [20.32].700 [17.78] [22.86].800 [20.32] [2.40].900 [22.86] [27.94] [2.40] [30.48] 1 [27.94] [33.02] [30.48] [3.6] [33.02] [38.10] [3.6] [40.64] 1.00 [38.10] [43.18] [40.64] [4.72] [43.18] [48.26] [4.72] [0.80] [48.26] Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add.020 [0.1] (not including the post lead in chamfer) to the maximum point-of-contact dimension..03±.003 Dia. [0.89±0.08].340 [8.64] ±.003 [2.4±0.08] Recommended P oard Hole Layout (for.062 [1.7] thick P board).148 [3.77].107 [2.72] (Localized Gold Plate rea).11±.010 [2.92±0.2] Ref. Point of ontact

93 Mod IV Receptacle ssemblies, Single-Row, enterline ottom Entry, End Stackable, Low Profile with Dual Tine ontacts ontact.020 [0.1].268 [6.79].247 Ref. [6.29] Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 174 Technical Documents page 276 Product Specification pplication Specification dditional receptacle assembly sizes are available; minimum order quantities may apply. onsult Tyco Electronics. Keying Plug Part No (Plugs into receptacle contact).140 [3.6].00 [1.27] 2 Plcs. Recommended P oard Hole Layout.148 [3.76].108 [2.74] Ø [ ] Section -.11 [2.92] No. of Dimensions ontact Plating/Part Nos. Pos. Plating Plating Plating [7.62].200 [.08] [10.16].300 [7.62] [12.70].400 [10.16] [1.24].00 [12.70] [17.78].600 [1.24] [20.32].700 [17.78] [22.86].800 [20.32] [2.40].900 [22.86] [27.94] [2.40] [30.48] 1 [27.94] [33.02] [30.48] [3.6] [33.02] [38.10] [3.6] [40.64] 1.00 [38.10] [43.18] [40.64] [4.72] [43.18] [48.26] [4.72] [0.80] [48.26] [76.20] [73.66] [101.60] [99.06] Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add.020 [0.1] (not including the post lead in chamfer) to the maximum point-of-contact dimension and.062 for recommended board thickness. Vertical Mount, Receptacle ssemblies Material Natural color nylon 177

94 Mod IV Receptacle ssemblies, Single-Row, enterline losed Top Entry, End Stackable, Low Profile with Single Tine ontacts X.020 [0.1] (Standoffs).24 [6.22] X Vertical Mount, Receptacle ssemblies Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 174 Technical Documents page 276 Product Specification pplication Specification dditional receptacle assembly sizes are available; minimum order quantities may apply. onsult Tyco Electronics..140 [3.6] ±.003 [2.4±0.08].00 [1.27] Max. Recommended P oard Hole Layout (for.062 [1.7] thick P board).148 [3.76].107 [2.72] (Localized Gold Plate rea).03±.003 Dia. [0.88±0.08] Point of ontact Section XX No. of Dimensions ontact Plating/Part Nos. Pos. Plating Plating Plating [7.62].200 [.08] [10.16].300 [7.62] [12.70].400 [10.16] [1.24].00 [12.70] [17.78].600 [1.24] [20.32].700 [17.78] [22.86].800 [20.32] [2.40].900 [22.86] [27.94] [2.40] [30.48] 1 [27.94] [33.02] [30.48] [3.6] [33.02] [38.10] [3.6] [40.64] 1.00 [38.10] [43.18] [40.64] [4.72] [43.18] [48.26] [4.72] [0.80] [48.26] [76.20] [73.66] [101.60] [99.06] Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with select gold plated receptacle assemblies. 2. To obtain the minimum mating post length, add.020 [0.1] (not including the post lead in chamfer) to the maximum point-of-contact dimension..12 [3.18] Ref. 178

95 Mod IV Receptacle ssemblies, Double-Row, x [2.4 x 2.4] enterline losed Top Entry, End and Side Stackable, Low Profile, x [2.4 x 2.4] enterline, Tine Spacing.020 [0.1] (Standoffs) Housing Glass-filled thermoplastic, black, 94V-0 rated ontacts Phosphor bronze, plated as follows: Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating Duplex [ ] gold on contact area, [ ] matte tin on solder area all over [ ] nickel Plating [ ] matte tin on solder leads, all over [ ] nickel Related Product Data Mateable Headers Refer to the Mating Post Selection Guide page 90 Performance haracteristics page 174 Technical Documents page 276 Product Specification pplication Specification [1.27] Max..198 [.03].03±.003 [0.89±0.08] Dia..24 [6.22] ±.003 [ ] Recommended P oard Hole Layout No. of Dimensions ontact Plating/Part Nos. Pos. Plating Plating Plating [.08] [7.62].200 [.08] [10.16].300 [7.62] [12.70].400 [10.16] [1.24].00 [12.70] [17.78].600 [1.24] [20.32].700 [17.78] [22.86].800 [20.32] [2.40].900 [22.86] [27.94] [2.40] [30.48] 1 [27.94] [33.02] [30.48] [3.6] [33.02] [38.10] [3.6] [40.64] 1.00 [38.10] [43.18] [40.64] [4.72] [43.18] [48.26] [4.72] [0.80] [48.26] Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add.020 [0.1] (not including the post lead in chamfer) to the maximum point-of-contact dimension..148 [3.77].107 [2.72] (Localized Gold Plate rea).12±.010 [3.18±0.2] Point of ontact Vertical Mount, Receptacle ssemblies 179