N Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount Bulkhead In Series Adaptors...
|
|
|
- Andrea Willis
- 5 years ago
- Views:
Transcription
1 Section Index Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount Bulkhead In Series Adaptors Other Information Assembly Instructions Cable Assembly Cable Information umerical Index Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by 136 Tel: u Fax: info@rfconnector.com
2 Specifications series RF connectors are 50 ohm constant impedance connectors with a consistently low VSWR across its frequency range of 0 to 11GHz. They are high quality medium size connectors standardly used with coaxial cables from.350" to.450" OD, but designs can also accomodate.078" to.875" cables. connectors are threaded and gasketed for weatherproof operation. The threaded coupling incurs low noise and withstands shock and vibration. LTI connectors are designed to conform to MIL-C specifications. Lighthorse Technologies offers a few styles of 75 ohm impedance versions of connectors. They are not matable with the 50 ohm connectors. The connector is the most popular medium size connector. Applications include test and measurement, antennae, base stations, transmitters, etc. PLUG Interface Mating Dimensions Letter Minimum Maximum A B C D E F G H I J K DIMESIOS ARE I MILLIMETERS Letter Minimum Maximum A B C D E F G H I J DIMESIOS ARE I MILLIMETERS JACK 137
3 Specifications ELECTRICAL RATIGS Impedance 50 ohm 75 ohm Frequency Range 0-11 GHz GHz VSWR GHz Voltage Rating (in VRMS at sea level) 1000 max Dielectric Withstanding Voltage (in VRMS at sea level) 2500 min Insertion Loss.15 db 10 GHz Insulation Resistance 5000 MΩ min Contact Resistance Center Contact Outer Contact 1.0 mω max 1.0 mω max MECHAICAL RATIGS Mating 5/8-24UEF threaded coupling Durability 500 matings max Recommended Coupling ut Torque 6 to 10 in-lbs Coupling Proof Torque 15 in-lbs Coupling ut Retention Force lbs max Contact Captivation 15.3 lbs max Cable Retention RG-174,188, lbs min RG-58,141,142,223, lbs min RG-59,62, lbs min RG-8,11,213, lbs min EVIROMETAL RATIGS Temperature Range -65 C to C Thermal Shock MIL-STD-202, Method 1017G, Condition B Vibration MIL-STD-202, Method 204, Condition B Corrosion MIL-STD-202, Method 101, Condition B Mechanical Shock MIL-STD-202, Method 213, Condition A MATERIALS Material Plating Connector Body Brass per QQ-B-626 ickel Center Contact Male Brass per QQ-B-626 Gold Female Beryllium Copper per QQ-C-530 Gold Insulator Teflon, Delrin, Polypropylene one Gasket Silicone Rubber one Crimp Ferrule Annealed Copper per WW-T-799 Same as body 138
4 Flexible Cable Straight Crimp Plug LTI-SM11T- XXX RG-316,174,188;Q1,D316 LTI-7SM11T- 179 RG-179 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. Page 172, Line 33 Straight Crimp Plug Dimension LTI-SM11T- XXX RG-58,141,142,223,400 A: 3.1 B: 4.4 LTI-7SM11T- 59 RG-59 (75 ohm) A: 3.9 B: 5.6 Fill in where XXX is. See ing Chart on page 3 for more info. Page 172, Line 33 Straight Crimp Plug LTI-SM11T- XXX RG-8,213,214; Q LTI-7SM11T- 11 RG-11 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. Page 172, Line
5 Flexible Cable Right Angle Crimp Plug LTI-LM11T-XXX RG-316,174,188;Q1,D316 LTI-7LM11T-179 RG-179 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. ASSEMBLY IST.: Page 177 Page 172, Line 34 Right Angle Crimp Plug Dimension LTI-LM11T-XXX RG-58,141,142,223,400 A: 3.1 B: 4.4 LTI-7LM11T-59 RG-59 (75 ohm) A: 3.9 B: 5.6 Fill in where XXX is. See ing Chart on page 3 for more info. ASSEMBLY IST.: Page 177 Page 172, Line 34 Straight Crimp Jack LTI-SF11T-XXX RG-316,174,188;Q1,D316 LTI-7SF11T-179 RG-179 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. Page 172, Line
6 Flexible Cable Straight Crimp Jack Dimension LTI-SF11T-XXX RG-58,141,142,223,400 A: 3.1 B: 4.4 LTI-7SF11T-59 RG-59 (75 ohm) A: 3.9 B: 5.6 Fill in where XXX is. See ing Chart on page 3 for more info. Page 172, Line 35 Panel Mount Crimp Jack M.H. LTI-SF12T-XXX RG-316,174,188;Q1,D LTI-7SF12T-179 RG-179 (75 ohm) 42 Fill in where XXX is. See ing Chart on page 3 for more info. MOUTIG HOLE (M.H.): Page 175 Page 172, Line 35 Panel Mount Crimp Jack M.H. Dimension LTI-SF12T-XXX RG-58,141,142,223, A: 3.1 B: 4.4 LTI-7SF12T-59 RG-59 (75 ohm) 42 A: 3.9 B: 5.6 Fill in where XXX is. See Part umbering Chart on page 3 for more inf o. MOUTIG HOLE (M.H.): Page 175 Page 172, Line
7 Flexible Cable Front Mount Bulkhead Crimp Jack M.H. LTI-SF13FT-XXX RG-316,174,188;Q1,D LTI-7SF13FT-179 RG-179 (75 ohm) 12 Fill in where XXX is. See ing Chart on page 3 for more info. MOUTIG HOLE (M.H.): Page 174 Page 172, Line 37 Front Mount Bulkhead Crimp Jack, Long Version M.H. LTI-SF13FLT-XXX RG-58,141,142,223, LTI-SF13FLT-XXX RG-316,174,188;Q1,D Fill in where XXX is. See ing Chart on page 3 for more info. MOUTIG HOLE (M.H.): Page 174 Page 172, Line 38 Rear Mount Bulkhead Crimp Jack M.H. LTI-SF13RT- XXX RG-316,174,188;Q1,D LTI-7SF13RT-179 RG-179 (75 ohm) 16 Fill in where XXX is. See ing Chart on page 3 for more info. MOUTIG HOLE (M.H.): Page 174 Page 172, Line
8 Flexible Cable Rear Mount Bulkhead Crimp Jack M.H. Dimension LTI-SF13RT-XXX RG-58,141,142,223, A: 3.1 B: 4.4 LTI-7SF13RT-59 RG-59 (75 ohm) 16 A: 3.9 B: 5.6 Fill in where XXX is. See Part umbering Chart on page 3 for more info. MOUTIG HOLE (M.H.): Page 174 Page 172, Line 36 Straight Clamp Plug LTI-SM21T- XXX RG-58,141,142,223,400 LTI-7SM21T- 59 RG-59 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. ASSEMBLY IST.: Page 178 Page 172, Line 39 Straight Clamp Plug LTI-SM21T- XXX RG-8,213,214; Q LTI-7SM21T- 11 RG-11 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. ASSEMBLY IST.: Page 178 Page 172, Line
9 Flexible Cable Right Angle Clamp Plug LTI-LM21T-XXX RG-58,141,142,223,400 LTI-7LM21T-59 RG-59 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. ASSEMBLY IST.: Page 179 Page 172, Line 40 Right Angle Clamp Plug LTI-LM21T-XXX RG-8,213,214; Q LTI-7LM21T-11 RG-11 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. ASSEMBLY IST.: Page 179 Page 172, Line 40 Straight Clamp Jack LTI-SF21T-XXX RG-58,141,142,223,400 LTI-7SF21T-59 RG-59 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. ASSEMBLY IST.: Page 178 Page 172, Line
10 Flexible Cable Straight Clamp Jack LTI-SF21T-XXX RG-8,213,214; Q LTI-7SF21T-11 RG-11 (75 ohm) Fill in where XXX is. See ing Chart on page 3 for more info. ASSEMBLY IST.: Page 178 Page 172, Line 40 Solder Plug for Semi-Rigid Cable Dimension LTI-SM31GT-086 Semi-Rigid.086 A: 2.3 B: 3.2 LTI-SM31GT-141 Semi-Rigid.141 A: 3.65 B: 4.8 ASSEMBLY IST.: Page 180 Page 173, Line 7 Right Angle Solder Plug for Semi-Rigid Cable Dimension LTI-LM31GT-086 Semi-Rigid.086 A: 2.3 B: 3.2 LTI-LM31GT-141 Semi-Rigid.141 A: 3.65 B: 4.8 ASSEMBLY IST.: Page 181 Page 173, Line 6 145
11 Flexible Cable/Semi-Rigid Cable Solder Jack for Semi-Rigid Cable Dimension LTI-SF31GT-086 Semi-Rigid.086 A: 2.3 B: 3.2 LTI-SF31GT-141 Semi-Rigid.141 A: 3.65 B: 4.8 ASSEMBLY IST.: Page 180 Page 173, Line 7 Bulkhead Rear Mount Jack for Semi-Rigid Cable M.H. Dimensions LTI-SF33RGT-086 Semi-Rigid A: 2.3 B: 3.2 LTI-SF33RGT-141 Semi-Rigid A: 3.65 B: 4.8 ASSEMBLY IST.: Page 180 Page 173, Line 7 Panel Mount Plug with Solder Cup Termination M.H. LTI-SM42T 41 LTI-7SM42T (75 ohm) 41 MOUTIG HOLE (M.H.): Page
12 Semi-Rigid Cable/Panel Mount Panel Mount Jack with Solder Cup Termination M.H. LTI-SF42T 41 LTI-7SF42T (75 ohm) 41 MOUTIG HOLE (M.H.): Page 175 Right Angle Panel Mount Jack with Solder Cup Termination M.H. LTI-LF42T 41 LTI-7LF42T (75 ohm) 41 Panel Mount Jack with Solder Post, Extended Dielectric, and O-Ring MOUTIG HOLE (M.H.): Page 175 M.H. LTI-SF92oDT 38 LTI-7SF92oDT (75 ohm) 38 MOUTIG HOLE (M.H.): Page
13 Panel Mount/Bulkhead Reverse Thread Panel Mount Jack with Solder Post, Extended Dielectric, and O-Ring M.H. LTI-SF92oDT-RT 38 LTI-7SF92oDT-RT (75 ohm) 38 MOUTIG HOLE (M.H.): Page 175 Bulkhead Jack with Solder Cup Termination M.H. LTI-SF43T 17 LTI-7SF43T (75 ohm) 17 MOUTIG HOLE (M.H.): Page
14 In Series Adapters Straight Plug to Plug Adapter LTI-A2SMMT LTI-7A2SMMT (75 ohm) Straight Jack to Jack Adapter LTI-A2SFFT LTI-7A2SFFT (75 ohm) Bulkhead Jack to Jack Adapter M.H. LTI- A2SFF3T 16 LTI-7A2SFF3T (75 ohm) 16 MOUTIG HOLE (M.H.): Page
15 In Series Adapters Right Angle Jack to Plug Adapter LTI-A2LFMT LTI-7A2LFMT (75 ohm) T Adapter, Jack to Jack to Jack LTI-A3TFFFT LTI-7A3TFFFT (75 ohm) T Adapter, Jack to Plug to Jack LTI-A3TF MFT LTI-7A3TFMFT (75 ohm) 150
Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
SMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
SMA - 50 Ohm Connectors
Alphabetical Index 142-0701-201 4 142-0701-206 4 142-0701-231 4 142-0701-235* 4 142-0701-236 4 142-0701-301 5 142-0701-306 5 142-0701-335* 6 142-0701-421 5 142-0701-426 5 142-0701-491 5 142-0701-496 5
TNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
MCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
Cannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
SMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
Corona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
The Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
SMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
SMP / SMP-COM / SMP-MAX series R222
3 SMP / SMP-COM / SMP-MAX series R222 SMP-MAX INTRODUCTION BOARD TO BOARD SOLUTIONS The Best Systems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment
SMA Connectors Series
SMA Connectors Series Content Page Description.. 2 Interface Dimensions.. 2 Interface Dimensions in mm/inches.. 2 Characteristics. 3 Cable Connectors 4 PCB Connectors 11 Panel Receptacles.. 13 Adapter
The Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
SMA. Precision 26.5GHz Connectors
SMA Precision 26.5GHz Connectors SMA Precision Connectors SMA subminiature connectors are 50 ohm precision connectors initially designed for performance through 18GHz, however the standard interface is
SMP. Description. Compatibility. Content. Interface dimensions (mm/inches) SMP female. Interface dimensions conformable to the following standards:
Description Compatibility HUBER+SUHNER Astrolab connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. HUBER+SUHNER Astrolab connectors have been MIL-SPEC
OSMP Microminiature Push-On Coaxial Connectors
Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For OSMP etween Series dapters, see Page 438. OSMP microminiature push-on
ndl-q & ndl-t SerieS CONNECTORS
ndl-q & ndl-t SerieS CONNECTORS TRIAXIAL CONNECTORS Interface Dimensions Mechanical & Environmental Specifications (Ø.168) Temperature Rating Corrosion -65 C to + 165 C MIL-STD-202 Method 101, Test Condition
Ganged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
In-Series and Between-Series Adapters SMA
Adapters SMA In-Series and Between-Series Adapters SMA If your choice of SMA Adapter is not shown in this section, please refer to the Table below to determine other possible locations. Should you not
2.92mm (SMK) Connectors
2.92mm (SMK) Connectors Catalog belfuse.com/cinch The Johnson 2.92mm Connector provides an excellent solution for demanding applications requiring high frequency transmission. Although similar to the SMA
SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
Board-to-Board connections
Board-to-Board connections MBX/MFBX/MMBX connectors Edition 2014/08 Innovative connections Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems
Applications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
SECTION 7 SMA/SMA-COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 7 /COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BMA Introduction... 74 Characteristics... 75 Plugs... 76 Jacks... 77 to 78 Receptacles...78
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
Series 3402 lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz
lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz Description HUBER+SUHNER gas discharge tube protectors make the best of the traditional spark gap protection principle for general
SMP connectors. the easy connection. Products overview. Applications
Products overview PCB mount SMD mount plug and Centre pin in SMD, BGA or throughhole configurations Surface mount technology plug and Centre pin in SMD, BGA or throughhole configurations Bulkhead mount
N Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
CONTENTS. Center Contact Configuration. Specifications, Materials etc Receptacles. Plug Receptacles Adapters. Convertible Adapters
CONTENTS Center Contact Configuration Specifications, Materials etc. Receptacles Plug Receptacles Adapters Convertible Adapters Connectors for Semi-Rigid Cable Connectors for Flexible Cable 3 4 5-9 10-11
GMS Interconnect Series Product Information
GMS Interconnect Series Product Information Microwave Products Product Features: Frequency range: DC up to 23 GHz, Force to engage/disengage: 10 ounces min./2.5 pounds max., Male connectors have full self-centering
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
TXC ULTRA-MINIATURE COAXIAL CONNECTORS. Ultra-Miniature Coaxial Connectors. Features. Materials/Finish. Specifications
ULTRA-MINIATURE COAXIAL CONNECTORS TXC Ultra-Miniature Coaxial Connectors Features 1: Ultraminiaturization provided by using hermetic beads. 2: The low profile and narrow flange leads to high density mounting.
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
BMA. 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 3. Adapters to BMA
CONTENT BMA INTRODUCTION to CONNECTORS & ADAPTERS Page 9 7/16 Page 15 N BMA Page 45 SBX SBY Page 61 Page 85 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 37
N-50 N-50. Technical Data. Microminiature Coaxial Connector. Material Data. Interface Dimensions. Plug (Male) Jack (Female) Material Female.
N0 N0 Microminiature Coaxial Connector Technical Data Description KJCOMTECH N connectors are available in both 7 and 0 impedance. The highest possible frequency is 8GHz accord ing to the connector type.
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
Accessories. SMA Terminator Plug. SMA Terminator Jack. BNC Terminator Plug. BNC Terminator Jack
Terminators SMA Terminator Plug Gold Plated Brass Nickel Plated Brass LTI-TRM-SAMGT (50 ohm) LTI-TRM-SAMNT (50 ohm) SMA Terminator Jack Gold Plated Brass Nickel Plated Brass LTI-TRM-SAFGT (50 ohm) LTI-TRM-SAFNT
Type SMP Connectors Product Catalog
Type SMP Connectors Product Catalog Connectivity for SMP Connectors Table of Content Connectivity for Table of Contents PAGE Introduction....................................3-4 Specifications...................................5-8
Electrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
Series 3400 lightning EMP protectors Quarter-wave stub technology
Series 3400 lightning EMP protectors Quarter-wave stub technology Description HUBER+SUHNER quarter-wave lightning EMP protectors offer the best lightning protection available in the market, as they form
REFERENCE PLANE Referenzebene
1Series RPC- 2.92 Interface Dimensions Series RPC-2.92 (code 02) D REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene D A E B C F F C B E A MALE Stecker FEMALE Kuppler Series RPC-2.92 Male Stecker
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
RF Connectors Technical Data Sheet. Gold over Nickel Plated Brass Contact. Size 0.5 in [12.7 mm] . Weight lbs [2.27 g].
![RF Connectors Technical Data Sheet. Gold over Nickel Plated Brass Contact. Size 0.5 in [12.7 mm] . Weight lbs [2.27 g].](/thumbs/76/74366494.jpg "RF Connectors Technical Data Sheet. Gold over Nickel Plated Brass Contact. Size 0.5 in [12.7 mm] . Weight lbs [2.27 g].")
RP SMA Female Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44723 Configuration SMA Female Reverse
Microwave Gilbert Push-on Interconnects
Microwave Gilbert Push-on Interconnects Table of Contents Table of Contents Connect to Precision and Performance 4 Custom Designs 5 Corning Optical Communications RF LLC 6 Reference Guide 8 GPO Products
PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE, JAM NUT MOUNTED, HERMETIC SEAL, CLASS 2)
INCH-POUND MIL-PRF-39012/14C 10 August 2016 SUPERSEDING MIL-PRF-39012/14B 18 September 1977 PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE,
PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH POUND MIL-PRF-55339/48B w/amendment 1 15 June 2017 SUPERSEDING MIL-PRF-55339/48B 30 April 2015 PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES
VITA 67 Series. Ideal For Blind Mate Applications. Electrical, Mechanical & Environmental Specifications
VITA 67 Series Delta Electronics Manufacturing Corp. introduces 4 position (VITA 67.1) and 8 position (VITA 67.2) RF connector housings designed for 3U and 6U formats within the OpenVPX architecture. Ideal
0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY
![0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY](/thumbs/83/88977257.jpg "0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY")
ONLINE CATALOG SWITCHCRAFT, INC. N. Elston Ave. Chicago, IL 00 77 79-700 FAX: 77 79-19 www.switchcraft.com EN MINI WEATHERTIGHT CONNECTOR SERIES EN CORD CONNECTOR 1.8 [9.8] 0. REF 0.70 dia. [17.8] PIN
AXOMACH E-16. High data rate links for faster data transmission. Microwave coaxial cables. Panel mount connector QUASI-FLEX. Cable mount connector 2
AXOMACH High data rate links for faster data transmission AXON proposes AXOMACH, a range of high data rate links composed of low loss microwave coaxial cables and different connector types: AXOMACH Micro-D
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
Product Performance Specifications QuadraPaddle Connector
Product Performance Specifications QuadraPaddle Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the QuadraPaddle Connector and connector system.
PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES N (CABLED), PIN CONTACT, CLASS 2)
INCH-POUND MIL-PRF-39012/1J 21 November 2016 SUPERSEDING MIL-PRF-39012/1J 26 February 2016 PERFORMNCE SPECIFICTION SHEET CONNECTORS, PLUG, ELECTRICL, COXIL, RDIO FREQUENCY, (SERIES N (CLED), PIN CONTCT,
M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
triaxial CONtaCts Overview Features
triaxal CONtaCts triaxial CONtaCts Overview Smiths Connectors concentric twinax/triax contacts provide flexibility in the design of high speed data systems. The contacts, including the unique sizes 10
RF & MW Connectors RF & MW Adapters RF Connectivity. RF & MW Connectors
RF & MW Connectors - 2.4 mm Connectors - 2.92 mm(k) Connectors - Hermetic Seal (0.02 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
Product Specification
MCX Jack, Straight Orientation, Through-hole MCX Plug, Straight Orientation, Through-hole Other configurations available for: Vertical and right angle cable-to-board applications Through-hole, surface
SPEC SHEET. ProAx Triaxial Camera Connectors. Gender-Reversible. Field Repairable. Format Reversible
For years, the industry has been locked into connector designs that are difficult to terminate, and even more difficult to field repair. ADC s line of ProAx Triaxial Camera Connectors will change the way
SSMC Connectors. Microminiature, screw-on mating High performance to 12.4 GHz. General Description
SSMC Connectors Microminiature, screw-on mating High performance to 12.4 GHz General Description Delta SSMC connectors are microminiature, 50Ω impedance connectors with 6-40 threaded coupling. SSMC connectors
Space Connectors. Your Connection to the Future
Space Connectors Your Connection to the Future SPACE CONNECTORS OVERVIEW Space Approved Connectors DTL-38999 twinax, and blindmate twinax connectors. Our space level triax connectors feature Sabritec's
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years. MIL-DTL audio connectors
Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years MIL-DTL-55116 audio connectors MIL-DTL-55116 solutions Eaton s MIL--DTL--55116 connectors and cable
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
HS-Lok Connector. Range Overview IP 68. Receptacle to Overmolded with Cable. In Line. HS-Lok Connector I Range Overview. Mated. Overmolded with Cable
HS-Lok Connector I Range Overview HS-Lok Connector IP 68 Mated Range Overview Receptacle to Receptacle In Line - Amphenol LTW Technology Co., Ltd. HS-Lok Connector I Specification Specification Identifications
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
RTX series EN
RTX series EN3716 10 CONTENTS RTX series Page RTX series Introduction... 10-4 Applications... 10-4 Product overview... 10-5 Technical characteristics... 10-6 & 10-7 How to order connectors... 10-8 Dimensions
Advance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
Amphenol. SCE Series Interconnect Solutions. the ultimate connection. For more information call Amphenol PCD
Amphenol the ultimate connection SCE Series Interconnect Solutions For more information call 210 372 0631 Amphenol PCD mhands@amphenolpcd.com SCE Snatch Connector Electrical Series The Ultimate Connector
8D Series MIL-DTL Series III
Description High contact density Screw coupling Contact protection: 100% Scoop proof Shell size from 9 to 25 Accessories available (protective caps, backshells, etc ) RFI - EMI shielding and shell to shell
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
Amphenol High Density HDB 3 /HSB 3 Connectors
Amphenol HDB 3 /HSB 3 Connectors TABLE OF CONTENTS Amphenol HDB 3 and HSB Connectors 3 Table of Contents..............................45 Introduction - Features, Options, Performance...............................
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
spinner Getting started with
spinner Getting started with 4.3-10 Edition A/2014 High Frequency Performance Worldwide www.spinner-group.com Three different coupling mechanisms: screw hand screw push-pull SPINNER sets Standards in RF
SSMP Interconnect Series
SSMP Interconnect Series INTRODUCTION Carlisle Interconnect Technologies (CarlisleIT) designed the SSMP connector product line to further improve package density of RF/Microwave systems. The SSMP interface
Cable Connectors SUHNER MCX 50 Ω. Straight Cable Plugs (male)
Cable Connectors Straight Cable Plugs (male) > for semi-rigid cables, SUCOFORM and MULTIFLEX cables > cable entry soldered Assembly Instruction 11 MCX-50-1-14 / 111 NE 23032081 Y2 (EZ 47) single SUCOPRO
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
QSL RF Connector System
QSL RF Connector System DESCRIPTION Coaxial Cable Insulation Displacement Interface Low profile Highly reliable ruggedized interface Surface mount technology Excellent price-to-performance ratio APPLICATIONS
Labs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
Labs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction