PAR EverServ 6000 Installation Guide

Transcription

1 One Blue Hill Plaza, 16th Floor, PO Box 1546 Pearl River, NY PC-AMERICA, (Voice) (Fax) PAR EverServ 6000 Installation Guide This document provides step-by-step instructions for setting up your PAR system, which contains the following components: the EverServ 6000 Terminal, integrated Pole Display and an integrated MSR. 1 P a g e

2 Hardware Ports 12V Accessory: Connect optional Virtual Pole Display power cable here. USB Ports: Connect a supported USB device here. Audio IN: Connect audio cable from external device here. Cash Drawer Ports (CD1 & CD2): Open Audio OUT: Connect audio cable here to speakers. LPT Port: Connect a supported LPT device here. Audio MIC: Connect audio cable here from microphone. DVI-D Port: Connect optional Virtual Pole Display video cable here. Serial Ports (1 & 2): Connect DB9 to RJ45 Serial cables, for connecting supported serial devices. PS2 Port: Connect optional PS2 keyboard or mouse here. Ethernet Port: Connect a network cable here from your modem or router. Unit Power: Connect Power cable here. 2 P a g e

3 Connecting the Power Cable to the PAR EverServ 6000 Terminal In order to use the PAR EverServ 6000 Terminal, you must first connect the power with the following cables: Follow these steps: Insert end 1 of cable 1 into end 2 of cable 2. Insert end 2 of cable 1 into a power outlet. Insert end 1 of cable 2 into the computer. 3 P a g e

4 Turning on the KS6600 Fan Free Terminal To turn on the KS6600, follow these steps. Locate the panel at the bottom of the screen, next to the hardware ports and press the power button. 4 P a g e

5 Installing Microsoft POS for.net The installer for Microsoft POS for.net can be downloaded at: Double-click the installer and follow these steps: Select Yes. Select Browse and select a folder to unzip all files to. Select Unzip. Navigate to the folder containing the unzipped files. Double-click on Setup.exe. Select Install. 5 P a g e

6 Provide a user name and organization. Select Next. Select Accept. 6 P a g e

7 Select Next. Select Install. 7 P a g e

8 Select Finish. 8 P a g e

9 Installing the PAR POS Device Drivers V The installer for the PAR POS Device Drivers can be downloaded at: Run Setup.exe. Select Next. Select Install all PAR Device Drivers. Select Next. 9 P a g e

10 Select Next when asked to select a program folder. Select Other then select Next to start copying files. Select Yes to view the readme file. 10 P a g e

11 Select Yes, I want to restart my computer now. Select OK. 11 P a g e

12 Installing the PAR OPOS Device Drivers V The installer for the PAR OPOS Device Drivers can be downloaded at: Open the Disk 1 folder and run Setup.exe, then follow these steps: Select Next. Select Install all PAR OPOS Modules. Select Next. 12 P a g e

13 Select Next when asked to select a program folder. Select Yes to view the readme file. Select OK. 13 P a g e

14 Installing OPOS Common Control Objects The driver for the OPOS Common Control Objects can be downloaded from: Select Next to begin the installation. Select Next when asked to select a program folder. 14 P a g e

15 Select Complete then select Next. Select Install to install the files. Select Finish to complete the installation. 15 P a g e

16 Configuring CRE or RPE to communicate with all devices To configure CRE or RPE to communicate with all devices, open CRE or RPE, select Manager, provide the requested credentials, and follow these steps. Select Setup then select Setup Screen. Select the Hardware tab. Select Page 1. Under Pole Display Type select OPOS. Under OPOS Pole Display select PARLineDisplay. 16 P a g e

17 Select Page 3. Under OPOS MSR (Card swipe) select PARMagCard. Select Update to save your changes. 17 P a g e