Yard Tractor. Parts Manual. Models

Transcription

1 Yard Tractor Parts Manual Models D /0 Supercedes 000, A-C Printed in USA

2 THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. Hardware descriptions are given in decimals. Decimals to Fractions.0 /. /. /. /. /. /.0 /.0 /. /. /. /. /. /. /.00 /.00 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Unit Model and Serial numbers here: PRODUCT REGISTRATION A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps:. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two.. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. TO SPEED PARTS ORDERING:. Know the model and serial numbers of your unit.. Know the part number required.. Know the quantity required.. Know the part description. Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.

3 MODELS Model HP Briggs & Stratton Intek Twin with " pan Serial No and up Model 0.0 HP Briggs and Stratton Intek Twin with " pan Serial No and up Model 0.0 HP Briggs & Stratton Intek Single with " pan Serial No and up Model 0.0 HP Briggs & Stratton Intek Single with 0" pan Serial No and up Model 0.0 HP Briggs and Stratton Intek Single with " pan Serial No and up Model 0.0 HP Briggs & Stratton Intek Twin with " pan Serial No and up International Model 0.0 HP Briggs and Stratton Intek Twin with " pan Serial No and up TABLE OF CONTENTS DECALS Decals MAIN FRAME, SEAT & CONTROLS Frame and Rear Deck Rear Wheel and Hydro Drive Hydro Transaxle Clutch and Brake - Hydro Hood, Dash and Battery Steering Attachment Lift POWER PLANT Engine, Fuel Tank and Belt Drive Exhaust MOWER DECK 0" Mower Spindle " Mower Deck Deck Front Mount " Mower Spindle " Mower Brackets and Rollers " & " Hanger Arm " Mower Deck and Rollers " Mower Spindle ELECTRICAL Continuity Diagrams Wiring Diagrams Model 0.0 HP Briggs & Stratton Intek Single with " pan Serial No and up Copyright 000, 00 Ariens Company

4 0000 Model 0, 0, 0, 0, 0, 0, 0, 0 DECALS /" /" ( mm) After proper belt installation:.. Marks must align as shown.. Distance must be / (mm).. Distance must be /" / ( mm).. These three nuts must be tightened.. These three nuts must be tightened. Après la pose correcte de la courroie :. Les repères doivent être alignées (voir schéma).. La distance doit être de mm mm (/(/ / in.). in.).. Ces trois écrous doivent être serrés. DANGER / PELIGRO 0 Después de la instalación adecuada de la correa:. Las marcas deben alinearse como se muestra.. La distancia debe ser de mm mm (/(/ / pulg.). in.).. Estas tres tuercas deben apretarse. 000 POUR EVITER LES BLESSURES GRAVES OU LA MORT TO AVOID SERIOUS INJURY OR DEATH PARA EVITAR DAÑOS SERIOS O LA MUERTE Lire le manuel d'utilisation. Éloigner les enfants et toute autre personne pendant le fonctionnement de la machine. Regardez derriere et sur les cotes lorsque vous reculez. Ne transportez jamais dénfant. Ne jamais décharger directement en direction de quelqu un. Des particules projetées peuvent provoquer des blessures. Tondez toujours de haut en bas et inversement jamais le long des pentes. Si la machine sárrete en montee. Debrayez la lame et redescendez doucement. Evitez les virages brusques. Maintenez toujours en place tous les elements de securite (protecteurs, interupteurs, etc.). Controlez le bon fonctionnement des interrupteurs de securité avant utilisation tel q'uindiqué dans le manuel d'utilisation. Comprenez bien la fonction et la situation de chacun des leviers et boutons de commande. Read the operator's manual. Keep children and others away from unit while operating. Look down and behind before and while backing. Never carry children. Never direct discharge toward other people. Thrown objects can cause injury. Go up and down slopes, not across. If machine stops going uphill, stop blade and back down slowly. Avoid sudden turns. Keep safety devices (guards, shields, switches, etc.) in place and working. Check interlock system per manual before use. Understand location and function of all controls. Leer el manual del operador. Mantenga la unidad alejada de los niños u otras personas cuando esté en funcionamiento. Antes y durante retroceso mirar hacia abajo y detras. Nunca monten niños. Nunca dirija la descarga hacia otras personas, ya que los objetos lanzados pueden provocar lesiones. Suba y baje pendientes, no transversalmente. Si la maquina se detiene subiendo cuesta, desactive la cuchilla y baje lentamente. Evite viradas subitas. Mantenga artefactos de seguridad (defensas, protectores, interruptores, etc.) en su lugar y trabajando. Verifique en el manual el sistema de engranar antes de usar. Tenga conocimiento de funciones y localizaciones de todos los controles. PE0 000 Decal-Hot Surface 0000 Decal-Operating Instructions Yard Tractor 000 Decal, Belt Diagram (0, 0, 0, 0, 0) 000 Decal, Mower Pan Head Danger 000 Decal, Warning 000 Decal, Blade Alignment (0, 0, 0, 0, 0)

5 DECALS Model 0, 0, 0, 0, 0, 0, 0, A 000A PE0 000 Decal, Dash with Lights 0000 Decal, Indicator Pos 000 Decal-Hood Yard Tractor 0 (0) 0000 Decal-Hood Yard Tractor (0) 0000 Decal-Hood Yard Tractor (0, 0, 0, 0) 0000 Decal-Hood Yard Tractor 0 (0 000 Decal-Hood Yard Tractor (0) 0000 Decal, Hood Yard Tractor 00 Decal, Set-Yard Tractor Controls 000 Decal, Ignition

6 Model 0, 0, 0, 0, 0, 0, 0, 0 FRAME AND REAR DECK PT Insert-Lift 000 Holder-Beverage 0000 Snap Bushing

7 FRAME AND REAR DECK Model 0, 0, 0, 0, 0, 0, 0, Bolt-Round Head Square Neck.- x. 0 Rear Deck 000 Nut-Locking-Top-Flange Nut-Self-Threading Fits. Stud 000 Seat-V00 Med Weltless (0, 0, 0, 0, 0, 0) 0000 Seat-V00 Hi Weltless (0, 0) 0000 Seat Pivot Plate Washer-Lock. x Bolt-Hex.- x. Grade 000 Tube Cap 0000 Nut-Locking-Top-Flange Spring-Compression. x. x. 000 Seat Box 0000 Bolt-Hex.- x. Grade 000 Bushing-Flange. x. x. x Seat Slides 000 Bolt-Round Head Square Neck.- x Screw-Cap Button Head.- x.0 Grade 0000 Washer-Lock External. x Pad-Battery 000 Bolt-Round Head Square Neck.- x. Grade 0000 Draw Bar 000 Screw-Tapping.- x. 000 Screw-Tapping.- x.0 0 Footrest-Left Hand 0 Footrest-Right Hand 0 Limiter, Mower Height Left Hand (0, 0, 0) 0 0 Limiter, Mower Height Right Hand (0, 0, 0) 0 Bracket, Deck Stop (0, 0, 0, 0, 0, 0) 000 Brace-Foot Rest Left Hand 000 Brace-Foot Rest Right Hand 000 Bushing-Flange. x.0 x. x.00 0 Main Frame 000 Bolt-Hex.- x. Grade Clip-Harness 000 Plate, Frame-Reinforcing 00 Weldment, Lift Link Mount Right Hand (0, 0, 0, 0, 0, 0) 00 Weldment, Lift Link Mount Left Hand (0, 0, 0, 0, 0, 0)

8 REAR WHEEL AND HYDRO DRIVE Model 0, 0, 0, 0, PT00 0 Mount-Transmission Left Hand 0 Mount-Transmission Right Hand 000 Nut-Locking-Top-Flange Pin-Hair.0 x. x. 000 Screw-Tapping.- x. 000 Nut-Jam.0-0 Grade 0000 Washer-Lock.0 x. Reg. 000 Sheave-Transaxle Fan-Black Nylon Screw-Tapping 0- x. 000 Transaxle - Hydro

9 REAR WHEEL AND HYDRO DRIVE 000 Rod-Transmission Disconnect 0000 Spacer.0 x. x Cap-Vent. Hydro-Gear 000 Hose-Vent.0 ID x.0 Long 0000 Fitting-Straight /" O-Ring Hydro-Gear 000 Bolt-Hex.- x.0 Grade 0000 Bolt-Hex.- x. Grade 000 Nut-Locking-Center Mount, Magnet 000 Washer-Flat-Steel. x. x Bushing-Sleeve.0 x. x.0 (0, 0, 0, 0) 000 Spacer, Wheel (0) 000 Assembly, Tire 0 x.00- (0, 0, 0, 0) 000 Assembly, Tire/Wheel (0) 000 Rim, 0 Tire (0, 0, 0, 0) 0000 Rim, Tire (0) 000 Tire 0 x.00- (0, 0, 0, 0) 000 Tire/Wheel Assembly x.0- (0) 000 Spindle Cup 0000 Ring-Retaining-External.0 x Hub Cap 000 Damper-Hydraulic 000 Stud-Ball 0000 Anchor-Spring-Top Spring-Tension.0 x.0 x Support - Shift Arm 000 Mount-Magnet 000 Magnet-HS 000 Strap-Torque Left Hand 000 Bolt-Hex.- x.0 Grade 000 Bolt-Hex.- x. Grade 000 Strap-Torque Right Hand 000 Screw-Tapping.- x Rod-Shift Arm-Shift 000 Washer-Flat-Steel.0 x. x Pivot-Reverse 0000 Bushing-Flange.0 x. x. x. 000 Anchor-Spring-Bottom 0000 Bolt-Hex.- x. Grade 0000 Yoke.- x Washer-Flat-Steel.0 x.0 x. 000 Pin-Clevis. x Pin-Cotter. x Washer-Flat-Steel.0 x. x Bushing-Flange. x.0 x. x Pin-Groove. x. 000 Arm & Hub 0000 Bushing-Flange.0 x x Shaft-Pedal (Single) 0 Pedal-Forward 0000 Cover-Pedal-Forward Model 0, 0, 0, 0, 0

10 REAR WHEEL AND HYDRO DRIVE Model 0, 0, PT00 0 Mount-Transmission Left Hand 0 Mount-Transmission Right Hand 000 Nut-Locking-Center Washer-Flat-Steel. x. x Screw-Tapping.- x. 000 Nut-Jam.0-0 Grade 0000 Washer-Lock.0 x. Reg. 000 Sheave-Transaxle 000 Fan, Transmission Screw-Tapping 0- x. 0

11 REAR WHEEL AND HYDRO DRIVE Model 0, 0, Transaxle, Hydro 000 Rod-Transmission Disconnect 000 Pin-Hair.0 x. x Bolt-Hex.- x. Grade 0000 Key-Square. x.0 x. 000 Washer-Flat-Steel. x. x Spacer, Wheel 000 Tire/Wheel Assembly 0 x.00- Ply 000 Rim-Sierra 000 Tire 0 x Spindle Cup Ring-Retaining-External.0 x Hub Cap 000 Mount-Magnet 000 Magnet-HS 000 Washer-Flat-Steel. x. x Rod-Shift 0000 Bracket, Shiftrod 000 Washer-Flat-Steel.0 x. x Yoke.- x Washer-Flat-Steel.0 x.0 x Pin-Clevis. x Pin-Cotter. x Washer-Flat-Steel.0 x. x Bushing-Flange. x.0 x. x Pin-Groove. x. 000 Arm & Hub 0000 Bushing-Flange.0 x x Shaft-Pedal (Single) 0 Pedal-Forward 0000 Cover-Pedal-Forward Screw-Tapping.- x.0 Hex Washer Head 000 Screw-Tapping.- x. Hex Washer Head 000 Bracket, Transmission Support

12 HYDRO TRANSAXLE Model 0, 0, 0 PT00

13 HYDRO TRANSAXLE 0 Main Housing, Assembly 0 Side Housing, Assembly 0 Center Section, Assembly 0 Swashplate, trunnion Machined 0 Block, Assembly 0 0. oz Sealant 0 Hex Flange Screw.-0 x. 0 Shaft, Input Ring, Retaining 0 Spacer 0 Ring, Retaining Seal, Lip. x. x. 0 Ball Bearing MM I.D. x 0MM O.D. MM 0 Hex Flange Head Screw.- x. 0 Lip Seal. x. x 0 Arm Control 0 Bearing, Thrust.0 x. x. 0 Washer, Check Plug Assembly 0 Shaft, Motor 0 Gear, Pinnion T 0T/T Gear 0 Gear, 0T Jackshaft 0 0 0T Bull Gear 0 Sleeve Bearing. x. x. 0 Sleave Bearing (Outboard). x. x. Washer. x.0 THK 0 Lip Seal Axle Seal Shaft, Axle. x. (Key Right Hand) Shaft, Axle. x. (Key Left Hand) 0 Miter Gear (Splined) 0 Miter Gear T 0 Shaft 0 Ring, Spiral Retaining 0 Pin, Jackshaft 00 Magnet, Ring Spring, Bypass 00 Hydro Mounting Screw.- x. Ling Filter Base, Filter 0 Actuator, Bypass 0 Rod, Bypass Actuator 0 Arm, Bypass 0 Retaing Ring. External 0 Seal, Lip. x. x. TC Washer, Flat. I.D. x.00 O.D. x.0 THK Retaining Ring 0 Bearing, Center Block 000 Spring, Helical Compression 000 Washer. oz 0W-0 Oil 0 Brake Yoke 0 Rotor, Brake 0 Brake Puck Puck Plate Brake Actuating Pin HFHCS.-0 x with Patch, Special Flange Model 0, 0, 0

14 Model 0, 0, 0 HYDRO TRANSAXLE Spacer 0 Spring, Brake Arm Bias Square Head Bolt.- Ribbed Arm Brake Slotted Hex Nut Cotter Pin.0 x. 0 Compression Spring Brake Anti-Drag 0 Washer, HT.0 I.D. x.00 O.D. x.0 0 Washer, Flat. I.D. x. O.D. Oil Seal. x.00 x. 0 Check Plug Assembly,.0 Washer Pin, Standard Headless Fitting,. SAE. Tube Hose, Expansion Tank Cap, Vent 0 Bolt, Self tapping 0- x.0 Spring Clip, Housing Thrust Bearing, Ball. x I.D. x. x. 0 Screw Socket Head Cap.- x.0 00 Spacer, Location 00 Screw SFHCS.- x.00 Arm, Return 0 Puck, Adjusting 00 Washer. I.D. x.0 O.D. x. 0 Spring, Extension 0 Spacer. I.D.. O.D. x. 0 Bracket, Torque 0 Deflector 0 0 Washer, Motor Shaft. I.D. x. O.D. x Plug SAE # 0 0 Screw, Torx Head.- O-Ring.0 x. I.D. Bracket, Support Expansion Tank Spring Guid Pin, Spring 0 Fan, inch 0 Pulley Hex Lock Nut.0-0 (Nylon Insert) Washer, O.D. Slotted. x. x.0 Bracket, Belt Keeper 0 Center Section, Filter, Bypass Assembly 0 Filter Assembly 00 Kit, Fan/Pulley (Includes - ) 0 Seal, O-Ring Kit 00 Kit, Expansion Tank Cap, Expansion tank Shipping 0 Stud, Ball Bracket, Crusie Damper 0 Hex Nut.- Damper 0 Washer, Helical Spring Lock., Regular

15 CLUTCH AND BRAKE-HYDRO Model 0, 0, 0, 0, 0, 0, 0, PT Nut-Locking-Jam Washer-Flat-Steel.0 x. x Spring-Compression.0 x. x Spring-Compression. x. x Nut-Jam Rod-Brake (0, 0, 0, 0, 0) 000 Rod, Brake (0, 0, 0) 000 Trunnion (0, 0, 0) 0 Knob-Park Brake Rod Pin-Cotter.0 x Spring-Tension.0 x.0 x. 000 Ring-Retaining-External.0 x Bellcrank-Parking Brake 000 Screw-Tapping - x Switch, Interlock 000 Pin-Hair Internal.0 x. x. 000 Rod-Parking Brake 000 Cover-Pedal-Brake Pedal-Brake 0000 Pin-Groove. x Lever-Brake Switch 000 Weldment, Brake Arm 000 Lever-Parking Brake 000 Nut-Locking-Center Shoulder Spacer 000 Bolt-Round Head Square Neck.- x. 000 Grip.0 x. x Spring-Tension.0 x. x Washer-Plastic.0 x. x.0

16 Model 0, 0, 0, 0, 0, 0, 0, 0 HOOD, DASH AND BATTERY PT Dash Screw-Set 0- x. 0 Knob-Throttle 000 Throttle Control-Tec/B & S 000 Washer-Flat-Steel. x. x Nut-Locking-Center Ignition Switch Key 000 Cap- Ignition Switch 000 Nut-Panel Washer-Lock Internal. x PTO Knob/Switch Assembly 000 Choke Cable (0, 0, 0, 0) 0000 Screw-Tapping 0- x. 000 Bolt-Round Head Square Neck.- x. 000 Holddown-Battery 000 Support-Dash-Top

17 HOOD, DASH AND BATTERY 000 Washer-Flat-Steel. x. x Nut-Locking-Nylon Rod-Hood Prop Screw-Tapping.0-0 x. 000 Mount-Prop Rod 0000 Wave Washer 000 Washer-Flat-Steel. x. x Nut-Locking-Center Cover- Switch 000 Switch-Light 000 Switch-Cruise 000 Battery w/tube 0000 Rubber Pad Support-Dash-Base 000 Screw-Tapping.- x Nut-Hex Washer-Lock. x Brace 000 Spring-Tension.0 x. x. 0 Side Panel-Right Hand 0 Side Panel-Left Hand 000 Screw-Tapping - x.00 0 Hood, Ariens with Slots (0, 0, 0, 0) 0 Hood, Ariens no Slots (0, 0, 0, 0) Headlight-Left Hand (Includes, 0 & ) 000 Headlight-Right Hand (Includes, 0 & ) 000 Nut-Hex Washer-Lock. x Washer. x.0 x Washer-Flat-Nylon. x.000 x Bolt-Hex.- x.00 Grade 000 Grill 0000 Clevis Pin./. x Screw-Tapping - x Hood Latch 000 Grip.0 x. x Washer-Flat-Steel. x.0 x Screw-Tapping.- x Baffle-Hood (0, 0, 0, 0) 000 Baffle-Hood (0, 0, 0) 0000 Baffle-Hood (0) 000 Brace-Throttle Control 0000 Pin-Cotter.0 x. 000 Locator-Hood 0000 Screw-Tapping 0- x Screw-Tapping 0- x Lamp Socket 0000 Headlight Bulb Clip-Harness 0000 Insulator 000 Bolt-Hex. - 0 x. Grade Washer-Locking.0 x.0 Heavy 000 Nut-Hex Washer-Flat-Steel. x.00 x.0 0 Bracket-Steering Assembly 0000 Nut-Lock-Jam-Center Washer-Flat-Steel. x. x Bracket-Steering Assembly Model 0, 0, 0, 0, 0, 0, 0, 0

18 Model 0, 0, 0, 0, 0, 0, 0, 0 STEERING PT Steering Wheel 0000 Pin-Roll.0 x Bolt-Hex.- x. Grade 000 Washer-Flat-Steel. x. x Bearing-Flange. x Holes x Washer-Lock. x.0

19 STEERING 000 Nut-Hex Tube 0000 Pin-Roll.0 x Column, Steering 000 Cone-Steering Column 0 Bracket, Steering Gear 000 Bolt-Hex.- x.0 Grade Bushing-Flange.0 x.0 x. x. 000 Gear, Steering 0000 Ring-Retaining-External.0 x Washer-Flat-Steel. x. x Bolt-Hex.-0 x. 000 Nut-Locking-Center Nut-Locking-Top-Flange Arm, Steering Rod 0000 Nut-Locking.--Grade 000 Rod End,. Right Hand Bolt-Button Head.- x. Grade 000 Nut -Jam Pin.. x. x Pinion Gear-Steering 000 Bolt-Hex.- x. Grade 000 Bushing-Sleeve. x. x Bushing-. x.00 Self-Lubricating 000 Link-Drag (Includes & ) 000 Arm-Steering Spindle 000 Washer-Flat-Steel. x. x Bushing-Sleeve.0 x. x Spindle Left Hand 000 Spindle Right Hand 0000 Fitting-Lube.- x. 000 Axle, Front 000 Nut-Locking-Center Tire/Wheel Assembly x Wheel-with Bearings 0000 Bushing-/ Bore Fitting-Lube.- x Tire-Turf Saver x.00- Ply 000 Bearing-Ball Spindle Cup 0000 Hub Cap 000 Bushing-Sleeve. x. x Bushing-Sleeve. x.000 x. 000 Bolt-Hex.- x. Grade 000 Washer-Flat-Steel.0 x.00 x Pin-Roll. x. 000 Nut-Jam.-, Left Hand 000 Rod End,. Left Hand 000 Rod, Tie (Includes & ) Model 0, 0, 0, 0, 0, 0, 0, 0

20 Model 0, 0, 0, 0, 0, 0, 0, 0 ATTACHMENT LIFT PT0 0

21 ATTACHMENT LIFT 000 Cover-Lift Right Hand 000 Screw-Tapping - x. 000 Screw-Machine.0- x. 0 Lift Lever 000 Quadrant-Lift 000 Bushing-Flange.0 x. 000 Arm-Lift 000 Bolt-Round Head Square Neck.- x. Grade 000 Nut-Locking-Top-Flange Cover-Lift Left Hand 000 Nut-Locking-Center Washer-Flat-Steel.0 x. x Pin-Cotter. x Pivot-Pin 000 Bolt-Hex.-0 x.0 Grade 0000 Pin-Lift 0000 Spring-Tension.0 x. x Lever-Detent 0000 Decal-Indicator Position Indicator-Deck Height Screw-Set.-0 x. 000 Bolt-Round Head Square Neck.- x. 000 Bracket, Center Lift 0000 J-Clamp 000 Nut-Flange Lever, Center Lift 000 Washer, Flat-Steel.0 x.00 x Pin, Hair External. x. x. 000 Ring-Retaining-External.0 x Nut,0- Low Crown, Acorn 000 Spring, Gas (0, 0, 0, 0, 0, 0) 000 Spring, Gas (0) 000 Washer-Flat-Steel. x. x Pin-Hair Internal.0 x. x Washer-Flat-Steel. x.0 x. 000 Link, Lift Model 0, 0, 0, 0, 0, 0, 0, 0

22 Model 0, 0, 0, 0, 0, 0, 0, 0 ENGINE, FUEL TANK AND BELT DRIVE PT00

23 ENGINE, FUEL TANK AND BELT DRIVE 000 Engine, Briggs & Stratton Intek 0HP V Twin (0) 0000 Engine, Briggs & Stratton Intek HP Single (0, 0) 0000 Engine, Briggs & Stratton Intek Single HP (0) 000 Engine, Intek ci Vertical No Muffler (0, 0, 0) 000 Engine, Intek HP OHV Twin (0) 0000 Washer-Lock External. x. x Screw-Tapping.- x. (0, 0, 0, 0, 0, 0) 000 Nut-Locking-Top-Flange.- (0, 0) 000 Washer-Flat-Steel. x. x.0 (0, 0) 000 Bolt-Hex.- x.0 Grade (0, 0) 000 Pin-Clevis. x. 000 Nipple (0, 0, 0, 0, 0, 0) 0000 Elbow Screw-Tapping.- x Tank Fitting 000 Hose Clamp 000 Hose-Fuel Line " (0, 0, 0, 0) 000 Hose-Fuel Line " (0, 0, 0, 0) 000 Bushing-Flange. x.0 x. 000 Fuel Cap 000 Fuel Tank 000 Nut-Hex Nut-Locking-Top-Flange Belt Finger (0, 0, 0, 0, 0) Washer-Flat-Steel. x.0 x Belt Finger 000 Washer-Flat-Steel. x. x Adapter, Oil Drain 000 V-Belt (0, 0, 0, 0, 0, 0) 000 V-Belt (0, 0, 0) 000 Spring, Extension 000 Washer-Flat-Steel. x.00 x. 000 Shoulder Stud 000 Arm, Idler Pivot 000 Pin-Cotter. x Fitting-Lube.- x. 000 Washer-Flat-Steel.0 x. x Idler Flat. x. 000 Bolt-Hex.- x. Grade (0, 0, 0, 0, 0, 0) 0000 Bolt-Hex.- x.0 Grade (0, 0) 000 Idler Pivot Arm 0000 Idler-V x. 000 Bolt-Hex.- x. Grade (0, 0, 0, 0, 0, 0) 000 Bolt-Hex.- x. Grade (0) 0000 Bolt-Shoulder.- x. Model 0, 0, 0, 0, 0, 0, 0, 0

24 Model 0, 0, 0, 0, 0, 0, 0, 0 ENGINE, FUEL TANK AND BELT DRIVE 0000 Pin-Cotter.0 x. 000 Finger-Belt (0, 0, 0, 0, 0) Yoke.- x. 000 Link 0000 Key-Square. x. x. 000 Sheave Extension Shaft-Hydro (0, 0, 0, 0, 0, 0) 000 Sheave Extension Shaft-Hydro (0, 0) 000 Electric Clutch/Brake (0, 0, 0, 0, 0, 0) 000 Electric Clutch/Brake (0, 0) 000 Anchor-Clutch (0, 0, 0, 0, 0, 0) 000 Anchor- Clutch (0, 0) 0000 Washer-Lock. x. 000 Bolt, Hex.-0 x.00 Grade (0, 0, 0, 0, 0, 0) 000 Bolt-Hex.-0 x.00 Grade (0, 0) 000 Belt Finger 000 Pin-Hair-Internal.0 x. x Washer-Flat-Steel.0 x. x. (0, 0, 0, 0, 0, 0) 000 Washer-Flat-Steel. x. x. 000 Bolt-Round Head Square Neck.- x Nut-Locking-Top-Flange Spring-Tension.0 x. x Bushing-Flange. x. x. Nylon 000 Washer-Flat-Steel.0 x.0 x Wave Washer 000 Bolt-Round Head Square Neck.- x. Grade 000 Washer-Flat-Steel. x. x Washer-Locking. x.0 Heavy 000 Nut-Hex Adapter-Oil Drain 000 Cock-Oil Drain 000 Tube-Oil Drain 0000 Nut-Nylock Bolt-Hex.- x.00 Grade 000 Washer-Flat-Steel. x.0 x Washer-Flat-Nylon. x.000 x Nut-Hex Bolt-Round Head Square Neck.- x. Grade

25 EXHAUST Model 0, 0, 0, 0, 0, 0, 0, 0 0 PS0 000 Screw-Cap.- x. (0, 0, 0, 0, 0, 0) 000 Washer-Flat-Steel.0 x. x Pipe-Exhaust Twin B & S (0, 0, 0, 0) 000 Gasket B & S (0, 0, 0) 000 Pipe Exhaust (0, 0, 0) 000 Muffler with Deflector (0, 0, Deflector-Exhaust (0, 0, 0, 0) 000 Screw-Tapping - x. (0, 0, 0, 0) 000 Muffler-Exhaust (0, 0, 0, 0) Screw-Tapping.- x Screw-Tapping - x. (0, 0, 0, 0, 0, 0) 000 Screw-Tapping - x. (0, 0) 000 Bracket-Muffler 0 Shield-Heat (0, 0) 000 Heat Shield-Fabric x 0.

26 0 MOWER DECK, BELTS AND BLADES Model PT V-Belt 0000 Nut-Hex Cover 000 Left Spindle Sheave 000 Right Spindle Sheave 000 0" Mower Deck with Decals 000 0" Mower Deck Assembly Complete 0 Mower Adjustment Tab 0000 Nut-Locking-Flange.- 0 Roller Clevis 000 Bolt-Round Head Square Neck.- x.

27 0 MOWER DECK, BELTS AND BLADES Roller 000 Pin-Hair-Internal.0 x. x Bushing-Flange. x.00 x. x. 000 Clevis Pin./. x. 00 Washer-Flat-Steel. x.0 x Bearing Slinger 0000 Bearing-Ball.0 x. x Spindle Housing 000 Spacer. x.000 x. 000 Bolt-Round Head Square Neck.- x.0 Grade Retainer Hub 000 Blade Tray 000 Blade 0000 Washer-Lock.0 x. 000 Nut-Jam Bolt-Hex.- x.00 Grade 0000 Nut-Locking-Flange Pin 0000 Spring-Torsion.0 x.0 x Bushing Ring-Retaining-External. x Bolt-Round Head Square Neck.-0 x.0 00 Hinge Plate In Deflector 0000 Nut-Locking-Flange Mount Plate Bearing-Ball. x. x Jackshaft Pulley 000 Spacer.0 x.0 x. 000 Washer-Flat-Steel.0 x.00 x Nut-Locking-Nylon Ring-Retaining-External.0 x Washer-Flat-Steel.0 x.0 x Bolt-Hex.- x.0 Grade 0000 Bushing-Flange.00 x. x. x. 0 Idler Arm 0000 Idler-Flat.00 x Key-Woodruff. x. x. 000 Nut-Locking-Center Spring-Tension. x. x Bolt-Round Head Square Neck.- x. Grade 000 Washer-Plastic.0 x. x.0 Model 0

28 MOWER DECK Model 0, 0, 0, 0, PT0 000 Mower- " Yard Tractor with Decals 000 Mower- " Yard Tractor Assembly Complete 0 Reinforcement-Deck 000 Cover-Deck Reinforcement Right Hand 0000 Cover-Deck Reinforcement Left Hand 000 Bolt-Hex.- x. Grade 0000 Nut-Locking-Top-Flange Screw-Tapping Hex Washer Head Thread Rolling.- x Bolt-Hex.- x. 0 Weldment-Baffle Upper Left Hand 0 0 Weldment-Baffle Upper Right Hand 000 Deflector-Chute 00 Hinge-Plate 000 Bolt-Round Head Square Neck.-0 x Nut-Locking-Flange Ring-Retainig-External. x Spring-Torsion.0 x.0 x Bushing 000 Pin 0 Deflector-Baffle Bolt-Round Head Square Shank.-X. Grade 000 Bolt-Round Head Square Neck.- x.

29 DECK FRONT MOUNT Model 0, 0, 0, 0, 0 0 PS00 0 Brace, Front Mount 0000 Mount, " Deck Front 000 Bolt, x.- UNC Button Head 000 Nut-Locking-Center Screw-Tapping.- x.0 Hex Washer Head 000 Screw, Socket Head Cap. x Bolt-Hex.-0 x. Grade 000 Spring-Compression.0 x. x. 000 Retainer, Brace Rod, Link 000 Washer-Flat-Steel. x. x Nut-Locking-Nylon Nut-Locking-Center Washer-Flat-Steel. x.0 x Bushing-Sleeve.0 x. x Nut-Locking-Nylon.0-

30 0 MOWER SPINDLE Model 0, 0, 0, 0, 0 PT

31 MOWER SPINDLE Model 0, 0, 0, 0, Nut-Locking-Nylon Washer-Flat-Steel.0 x.00 x Spacer,.0 x. x. 000 Bearing. x. x. 000 Bolt-Round Head Square Neck.- x. Grade 000 Jackshaft " Sierra 000 Nut-Locking-Top-Flange Sprocket-Drive 0 Weldment, Plate Mount Assembly-Idler Pulley 000 Washer-Flat-Steel. x. x. 000 Arm-Idler 000 Bolt Round Head Square Neck.- x. Grade 0000 Spacer, Sprocket 0000 Nut-Locking-Top-Flange Bolt-Round-Head Square Neck.- x. Grade 000 Bolt-Round-Head Square Neck.- x. Grade 0000 Spring-Compression. x. x. 000 Bracket-Belt Adjustment Bolt-Eye.- x Bolt-Hex.- x..00 Grade Bolt-Serrated Hex Flange Washer Head.- x. 000 Nut-Locking-Nylon Belt-Cog 0000 V-Belt A-Section. x. 000 Bolt-Round Head Square Neck.- x. Grade 000 Nut-Locking-Jam-Center Nut-Locking-Top-Flange Assembly-Spindle Housing Weldment-Spindle Shaft 000 Bolt-Round-Head Square Neck.- x.00 Grade 000 Support, Lift Bracket 0000 Key Woodruff. x. x Bearing-Slinger 000 Washer-Flat-Steel. x. x. 000 Hub-Retainer 000 Tray-Blade 000 Blade Washer-Locking. x Nut-Jam Washer-Flat-Steel. x. x Screw-Tapping.-0 x. Hex Washer Head 000 Retainer, Belt

32 Model 0, 0, 0, 0, 0 MOWER BRACKETS AND ROLLERS 0 PT0 000 Nut-Locking-Center Washer-Flat-Steel. x. x Bolt-Hex.- x Nut-Locking-Top-Flange Washer-Flat-Steel.0 x. x Clip-Spring 000 Pin-Hair-External. x. x. 0 Link-Lift 0 Bracket-Lift Weldment, Adjustment Link 000 Trunnion 000 Wheel x 0000 Bolt-Shoulder.- x.0 Hex Washer Head Grade 000 Pin-Clevis.0 x.00

33 0 & HANGER ARM Model 0, 0, 0 0 PT0 000 Pin-Hair-External. x. x. 0 Adjuster Link (0, 0) 000 Adjuster Link (0) 0 Rear Hanger, Left Hand 0 Left Hand Lift Arm 000 Clip, Spring 000 Washer-Flat-Steel. x. x Pin 0 Rear Hanger, Right Hand (0, 0) 0 Hanger, Rear Right Hand (0) 000 Hanger (0, 0) Hanger (0) Nut-Jam.- 0 Right Hand Lift Arm 000 Nut-Locking-Center Washer-Flat-Steel. x. x Bolt-Hex.- x. Grade 0000 Nut-Locking-Top-Flange.- 0 Hanger Bracket

34 MOWER DECK AND ROLLERS Model 0, PT0 000 Mower Pan Head w/decals " 0 Front Hanger 0 Bracket-Roller 000 Roller 000 Roller Shaft 000 Bolt-Round Head Square Neck.- x. Grade 000 Nut-Locking-Center.-

35 MOWER DECK AND ROLLERS Model 0, Nut-Locking-Top-Flange.0-0 Bracket-Left Front Wheel x 000 Bolt-Hex.0- x.00 Grade 000 Washer-Flat-Steel.0 x. x Nut-Locking-Center-Jam.0-0 Bracket-Left Rear 00 Cover-Right Hand Belt 00 Belt Cover Left Hand " 000 Nut-Hex Washer-Locking. x Bolt-Round Head Square Neck.- x. 0 Left Hand Rear Hanger Left Hand Rear Hanger Support 000 Right Hand Rear Hanger Support 0 Right Hand Rear Hanger 000 Bolt-Hex.0- x Grade 0000 Hinge Pin 0000 Bolt-Hex.- x. Grade 000 Washer-Flat-Steel.0 x. x Pin-Cotter.0 x. 00 Chute Extension 00 Flat Spring Nut-Locking-Center Bolt-Round Head Square Neck.-0 x.0 Grade 0 Mount-Roller 000 Bolt-Round Head Square Neck.- x.0 Grade 0000 Washer-Locking. x. 000 Nut-Hex.- 0 Baffle 0 Baffle Tab 000 Washer-Flat-Steel. x.0 x.0 0 Mower Adjustment Tab Bolt-Round Head Square Neck.0- x.00 Grade 000 Nut-Locking-Top-Flange Nut-Locking-Center Bolt-Round Head Square Neck.- x.00 Grade

36 MOWER SPINDLES Model 0, 0 PT

37 MOWER SPINDLES Model 0, Jackshaft - " Deck 0000 Nut-Locking-Nylon Washer-Flat-Steel.0 x.00 x Bearing-Ball. x. x. 000 Spacer.0 x.0 x. 0 Plate-Mount 000 Bolt-Round Head Square Neck.- x Nut-Locking-Flange.- 0 Arm-Idler Fitting-Lube.- x. 000 Bolt-Hex.00- x. Grade 000 Washer-Flat-Steel.0 x.0 x Spacer-Pivot 000 Nut-Locking-Center Idler-Flat.00 x. 000 Bolt-Hex.- x.0 Grade 000 Spring-Tension 000 V-Belt -" Deck 0 Housing Spindle Sheave 000 Nut-Jam Washer-Lock.0 x Bearing-Ball.0 x. x. 00 Spindle Shaft w/zerk 0000 Key-Woodruff. x. x. 000 Washer-Flat-Steel. x.000 x Bearing Slinger 0000 Retainer Hub 000 Blade Tray Blade 000 Spacer-Flanged 000 Nut-Locking-Center Washer-Flat-Steel. x. x Washer-Flat-Steel.0 x.0 x. 000 Bolt-Round Head Square Neck.- x. Grade 000 Spindle Housing 000 Bolt-Round Head Square Neck.- x. Grade 000 Spacer, Spindle 0000 Nut-Locking-Top-Flange.-

38 Model 0, 0, 0, 0, 0, 0, 0, 0 CONTINUITY DIAGRAM The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Key Switch (000) Seat Switch (000) B A S S B A S S B A S S M G M G M G OFF RUN START OPERATOR OFF SEAT OPERATOR ON SEAT Light Switch (000) Relay (0000) A A OFF ON 0 NOT ENERGIZED 0 ENERGIZED Solenoid (0000) Safety Switch (000) NOT ENERGIZED ENERGIZED ENGAGED (button out) DISENGAGED (button in) PTO Switch (000) Cruise Control Switch (000) DISENGAGED ENGAGED OFF CRUISE ON SET PT0

39 WIRING DIAGRAM ENGINE HEADLIGHTS PURPLE BLACK OIL PRESSURE REGULATOR FUEL SOLENIOD BLACK BLUE/ WHITE HOUR METER - + FUSE. AMP B A 0 OIL PRESSURE LIGHT PURPLE PURPLE Model 0, 0, 0, 0, 0, 0, 0, 0 SEAT / PTO RELAY SWITCH SEAT CRUISE RELAY 0 a YELLOW/RED 0 YELLOW/RED PINK CRUISE SWITCH 0 OFF ON MOM. BLACK START RELAY PTO SWITCH YELLOW PURPLE/ WHITE BLACK GREEN/WHITE PTO LIGHT PTO CLUTCH BLACK a SAFETY SWITCH 0 BLUE CRUISE MAGNET BLACK BLACK BLACK STARTER COIL COIL STARTER SOLENOID MAGNETO KILL RED BATTERY RED BLACK BROWN A WHITE / BLACK B FUSE 0 AMP BLACK A G S B M S G B KEY SWITCH a RED/VIOLET BLACK START LIGHT BLACK 0 BROWN/YELLOW RED/VIOLET PT Headlight Bulb 000 Switch-Light 0000 Molded Diode Plug 000 Battery with Tube 000 Ground Cable 000 PTO Knob/Switch Assembly 000 Key Switch 000 Switch-Safety Interlock 000 Bulb, # Wire Harness (0, 0, 0, 0) 000 Wire Harness (0, 0, 0, 0) 0000 Solenoid 000 Electric Clutch/Brake (0, 0, 0, 0, 0, 0) 000 Electric Clutch/Brake (0, 0) 0000 Hour Meter Kit-Sierra (Optional) 000 Starter Cable " 0000 Starter Cable." 000 Switch-Seat 000 Switch-Cruise 000 Magnet 0000 Relay AMP Fuse AMP Fuse

40 Ariens Company West Ryan Street P.O. Box Brillion, WI Fax