Apparel ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

Transcription

1 Apparel Lanyard, AiM logo, white/black Lanyard, AiM logo, red/black Hat, AiM logo, fitted, black $ Note: sizes available are small, medium, large, & extra large T-shirt, MyChron Mafia, black $ Note: sizes available are small, medium, large, extra large, & 2X-large T-shirt, MyChron Mike, white $ Note: sizes available are small, medium, large, extra large, & 2X-large T-shirt, MyChron Mike & Chad, white $ Note: sizes available are small, medium, large, extra large, & 2X-large

2 Care Products Cleaner, performance polish, 14oz $ 10.00

3 Stickers Item AiM logo, large oval, red/white AiM logo, small oval, red/white/sparkle MyChron 3 logo, red/white/blue MyChron 3 logo, red/white/grey MyChron 4 logo, black/grey/yellow MyChron logo, black/chrome/green, flame outline MyChron logo, black/grey, flame outline Top Gun Junior Drag Series, round, red/blue/tan EVO3 logo, large, red/white/blue

4 Software & Manuals Item Software RaceStudio 1 v RaceStudio 2 v SmartyManager v SportsAgenda v Qman v Drag Analyzer v Light Analyzer v GPS Manager v beta Lambda Configurator v MyChron 4 Picture Manager v MyChron Light TG Picture Manager v Firmware SmartyCam Firmware v MyTach Firmware v MyChron 4/2T Firmware v MyChron Firmware v MyChron Firmware v MyChron 3 Basic/2T Firmware v. 2.35/3.11 MyChron 3 Plus/Gold/Extreme Kart Firmware v. 2.09/2.15 MyChron 3 Plus/Gold/XG/Visor Auto/Moto Firmware v. 3.16/5.12 MyChron 3 XG-Log Firmware v MyChron 3 Dash (EVO3) Firmware v /3.14 MyChron 3 Dash (EVO4) Firmware v MyChron Light TG/TG Log Firmware v /19.16 EVO3 Pista/Pro Firmware v EVO3 Pista/Pro QM Firmware v MemoryKey Firmware v EVO3 2/4/8/13 Channel Firmware v EVO4 Firmware v MXL/DaVid Slave Firmware v MXL QM Firmware v DaVid Standalone Firmware v Dash ST1 Firmware v. 1.26

5 Sensors Speed sensor, M8 (0.75mm), pin/m magneto-resistive $ Speed sensor, M8 (0.75mm), pin/m magneto-resistive $ Speed sensor nut, M8 (0.75mm) $ 1.00 Speed sensor magnet, M4 (0.70mm) $ 8.00 Speed sensor, M8 (1.00mm), pin/m proximity $ Speed sensor, M8 (1.00mm), pin/m proximity $ Speed sensor nut, M8 (1.00mm) $ 1.00 Speed sensor, ABS, pin/m $ Infrared lap beacon receiver, 0.25m Hirose 4-pin $ Infrared lap beacon receiver, 2m Hirose 4-pin $ Infrared lap beacon receiver, 3m Hirose 4-pin $ Infrared lap beacon receiver, 1m pin/m $ Infrared lap beacon receiver, 3m pin/m $ Infrared lap beacon receiver, 1m pin/m $ Infrared lap beacon receiver, 3m pin/m $ Infrared lap beacon transmitter $ High-powered infrared beacon transmitter $ Infrared split beacon transmitter $ Power adaptor, IR beacon transmitter 12V, spade-clip/m, 1.5m $ RPM, signal to inductive converter $ RPM, 12V squarewave signal conditioner $ RPM, 12V power w/ coil pickup, 1.5m pin/m to spade/m $ RPM, inductive pickup kit, 1.5m wire $ Steering position sensor kit* $ *Note: kit item Rotary sensor, 0.25m, pin/m Steering shaft cog (21.95mm) Steering sensor cog (6.30mm) Steering belt 3-point L-mounting bracket 4-point base bracket 2-pc. concaved mounting collar Mounting bolt, 66mm, M6 (1mm) Allen wrench Belt for steering position sensor $ 5.50 Throttle position sensor, rotary $ Throttle position sensor, rotary replacement arm $ 5.00 Throttle/brake position sensor, push w/ mounting bracket $ Throttle/brake position sensor mounting bracket $ 3.00 Airbox pressure transducer, pin/m (0-70 bar) $ MSI 0-150psi pressure transducer, 1/8" NPT $

6 MSI psi pressure transducer, 1/8" NPT $ Inline brake pressure T-fitting, M10 $ Fuel pressure VDO 0-2 bar (0-29 psi), 1/8" NPT* $ Oil pressure VDO 0-5 bar ( psi), 1/8" NPT* $ Oil pressure VDO 0-10 bar (0-145 psi), 1/8" NPT* $ *Note: includes pressure splitter, 0.5m pin/m to spade/m Fuel pressure VDO 0-2 bar (0-29 psi), 1/8" NPT w/o harness* $ Oil pressure VDO 0-5 bar ( psi), 1/8" NPT w/o harness* $ Oil pressure VDO 0-10 bar (0-145 psi), 1/8" NPT w/o harness* $ *Note: does not include pressure splitter, 0.5m pin/m to spade/m "Y" pressure splitter, 0.5m pin/m to spade/m $ "Y" pressure splitter, 0.5m pin/m to spade/m $ String potentiometer, 11" stroke, 4-pin 719/m* $ *Note: available in a variety of lengths for special order Linear potentiometer, 50mm, 4-pin 719/m* $ Linear potentiometer, 75mm, 4-pin 719/m* $ Linear potentiometer, 100mm, 4-pin 719/m* $ Linear potentiometer, 150mm, 4-pin 719/m* $ Linear potentiometer, 200mm, 4-pin 719/m* $ *Note: available in a variety of lengths for special order Ball joint rod end, aluminum, M4 $ Ball joint rod end, plastic, M4 $ 4.50 External accelerometer, 4-pin 719/m $ External gyro, 4-pin 719/m $ Infrared tire pyrometer 20mm-50mm, pin/m $ TR oil/water temp., M5 (0.8mm) pin/m w/ 2K resistor $ TC oil/water temp., M5 (0.8mm) K-style/m $ TR oil/water temp., 1/8 NPT (27) pin/m w/ 2K resistor $ TC oil/water temp., M10 (1mm) K-style/m $ EGT TC, closed tip, M5 (0.8mm), K-style/m $ EGT nut, closed tip, M5 (0.8mm) $ 0.25 EGT, open tip, w/ bung kit $ 59.00

7 Patch Cables IR cable, 1.5m Hirose 4-pin/f to pin/m $ IR cable, 2m Hirose 4-pin/f to pin/m $ IR cable, 1.5m Hirose 4-pin/f to pin/m $ IR cable, 2m Hirose 4-pin/f to pin/m $ IR cable, 1.5m Hirose 4-pin/f to Hirose 4-pin/f $ IR cable, 2m Hirose 4-pin/f to Hirose 4-pin/f $ IR cable, 3m Hirose 4-pin/f to Hirose 4-pin/f $ Patch cable, 0.5m pin/m to pin/f $ Patch cable, 1m pin/m to pin/f $ Patch cable, 1.5m pin/m to pin/f $ Patch cable, 2m pin/m to pin/f $ Patch cable, 2.5m pin/m to pin/f $ Patch cable, 3m pin/m to pin/f $ Patch cable, 3.5m pin/m to pin/f $ Patch cable, 4m pin/m to pin/f $ Patch cable, 5m pin/m to pin/f $ Patch cable, 6m pin/m to pin/f $ Patch cable, 1.5m pin/m to 719, 4-pin/f $ Patch cable, 1m pin/m to pin/f $ Patch cable, 1.5m pin/m to pin/f $ Patch cable, 2m pin/m to pin/f $ Patch cable, 2.5m pin/m to pin/f $ Patch cable, 3m pin/m to pin/f $ Patch cable, 3.5m pin/m to pin/f $ Patch cable, 4m pin/m to pin/f $ Patch cable, 1m pin/m to pin/f $ Patch cable, 1.5m pin/m to pin/f $ Patch cable, 2m pin/m to pin/f $ Patch cable, 2.5m pin/m to pin/f $ Patch cable, 3m pin/m to pin/f $ Patch cable, 3.5m pin/m to pin/f $ Patch cable, 4m pin/m to pin/f $ Patch cable, 1m pin/m to 712, 5-pin/f CAN $ Patch cable, 2m pin/m to 712, 5-pin/f CAN $ Patch cable, 1m pin/f to 719, 4-pin/m CAN $ Patch cable, 2m pin/f to 719, 4-pin/m CAN $ Patch cable, 2m pin/m to 712, 7-pin/m* $ Patch cable, 4m pin/m to 712, 7-pin/m* $ Patch cable, 2m pin/m to 712, 7-pin/f* $ *Note: for use with SmartyCam only Patch cable, 1m DTM 6-pin to pin/m (GPS to DaVid) $ Patch cable, 2m DTM 6-pin to pin/m (GPS to DaVid) $ 40.00

8 Patch cable, 1m DTM 6-pin socket to pin/m $ Patch cable, 2m DTM 6-pin socket to pin/m $ Patch cable, 1m DTM 4-pin socket to pin/m $ Patch cable, 1m DTM 4-pin socket to pin/m $ Patch cable, 2m DTM 4-pin socket to pin/m $ Patch cable, thermocouple, 1.5m pin/m to K-style/f $ Patch cable, thermocouple, 1.5m K-style/m to K-style/f $ "Y" speed splitter, pin/m to pin/f* $ *Note: for use with EVO3 Pista/Pro only "Y" speed splitter, pin/m to pin/f* $ *Note: for use with EVO4 only "Y" OBDII splitter cable $ DaVid Cables DaVid Slave/SA power cable, pin/m $ DaVid camera power cable, 3.6mm, pin/m $ DaVid Slave CAN cable, pin/m to pin/m* $ *Note: sold as a pair; must be used in conjunction RCA extension cable, male to female* $ *Note: sold as a pair RCA cable, male to male* $ *Note: sold as a pair RCA video/audio to Mini-DIN w/ inline mic. $ LANC auto record, 2.5mm, pin/m $ DaVid SA ECU CAN/RS232 harness, pin/m $ DaVid SA ECU custom CAN/RS232 harness, pin/m* $ *Note: special order only

9 Brackets, Fittings, & Screws DaVid Slave/Standalone mounting tray $ Lipstick camera mount, universal roll bar-style $ 9.00 Lipstick camera mount, universal roll dash-style $ mm MCL TG fork bracket* $ *Note: available in black only; limited quantities available MyChron 3 P-N-P bracket, Suzuki GSX-R 600/750/ $ MyChron 3 P-N-P bracket, Honda CBR-R /04 $ MyChron 3 P-N-P bracket, Yamaha R1/R $ MyChron 3 P-N-P bracket, Kawasaki ZX-6R/RR/10R $ MXL P-N-P bracket, Suzuki GSX-R 600/750/ $ MXL P-N-P bracket, Suzuki Yoshimura GSX-R $ MXL P-N-P bracket, Suzuki Yoshimura Zero $ MXL P-N-P bracket, Yamaha R $ MXL P-N-P bracket, Yamaha R $ MXL P-N-P bracket, Kawasaki ZX-6R/ZX-6RR $ MXL P-N-P bracket, Kawasaki ZX-10R $ L-speed sensor mounting bracket, M8 $ " M5 inline water fitting (red) $ /8" or 3/4" M10 inline water fitting (silver) $ /8" & 3/4 M5 inline water fitting (black) $ /4" M5 inline water fitting (blue) $ M5 inline water fitting gasket $ " hose clamp $ 0.75 EGT bung, closed tip, M5 (0.8mm) $ 4.75 EGT hose clamp, closed tip, M8 (0.8mm) $ 6.00 EGT bung, open tip, M9 (1.5mm) $ EGT hose clamp & bung, open tip, M9 (1.5mm) $ LCU-One bung, 24.7mm (1.5mm)* $ 6.00 *Note: special order only LCU-One controller U-mounting bracket, 64mm* $ 6.25 *Note: special order only Rubber mount, brass/silver, 16.65mm x 3.6mm x 0.70mm $ 1.00 Screw, black, Philips, mm x mm x mm $ 0.15 Screw, silver, Philips, 11.7mm x 1.6mm x 32 $ 0.15 Screw, silver, Philips, 10.4mm x 2.3mm x 20 $ 0.15 Screw, black, Philips, 10.3mm x 2.9mm x 0.50mm $ 0.15 Screw, black, Philips, 9.55mm x 1.73mm x 1.00mm $ 0.15 Screw, black, Philips, 14.05mm x 2.6mm x 0.50mm $ 0.15

10 Screw, black, Philips, 13.8mm x 1.95mm x 24 $ 0.15 Screw, black, Philips, 10mm x 2.3mm x 20 $ 0.15 Screw, black, Philips, 16.25mm x 2.3mm x 18 $ 0.15 Screw, black, Allen, 14.85mm x 2.75mm x 0.50mm $ 0.15

11 Batteries CR2032, 3V Lithium* $ 3.00 *Note: used for Multichron stopwatch CR2430, 3V Lithium* $ 3.00 *Note: used for MyChron Light 6V/12V Note: all battery prices are quoted per battery

12 ECU & Logger Connectivity Subaru P-N-P kit ( ), $ Autronic ECU interface $ Porsche 996/997 ECU interface $ Pectel T2/T6 ECU harness $ DTA RS232 ECU interface (Scheda ASE-01) $ DTA P8 RS232 ECU interface $ Hondata K-Pro ECU interface $ EFI USA 2.1 ECU interface (EFI-01, Rev. 1) $ Mercury Marine ECU interface $ OBD II to DTM 4-pin/m (analog), 0.5m $ OBD II to DTM 6-pin/m (CAN), 0.5m $ MyChron 3 Visor ECU comm. switch box* $ *Note: special order only; limited availibility MyChron 3 P/G Auto 4-channel analog harness, Autosport $ MyChron 3 P/G Auto 4-channel analog w/ K-style, Autosport $ MyChron 3 P/G Moto 4-channel analog harness, Autosport $ MyChron 3 P/G Moto 4-channel analog w/ K-style, Autosport $ MyChron 3 P Moto P-N-P, Suzuki GSX-R 600/750/ $ MyChron 3 G Moto P-N-P, Suzuki GSX-R 600/750/ $ MyChron 3 P Moto P-N-P, Honda CBR-R /04 $ MyChron 3 G Moto P-N-P, Honda CBR-R /04 $ MyChron 3 P Moto P-N-P, Yamaha R1/R $ MyChron 3 G Moto P-N-P, Yamaha R1/R $ MyChron 3 P Moto P-N-P, Kawasaki ZX-6R/RR/10R $ MyChron 3 G Moto P-N-P, Kawasaki ZX-6R/RR/10R $ MXL Strada P-N-P, Suzuki GSX-R 600/750/ $ MXL Pista P-N-P, Suzuki GSX-R 600/750/ $ MXL Pro P-N-P, Suzuki GSX-R 600/750/ $ MXL Strada P-N-P, Suzuki Yoshimura GSX-R $ MXL Pista P-N-P, Suzuki Yoshimura GSX-R $ MXL Pro P-N-P, Suzuki Yoshimura GSX-R $ MXL Strada P-N-P, Suzuki Yoshimura Zero $ MXL Pista P-N-P, Suzuki Yoshimura Zero $ MXL Pro P-N-P, Suzuki Yoshimura Zero $ MXL Strada P-N-P, Yamaha R $ MXL Pista P-N-P, Yamaha R $ MXL Pro P-N-P, Yamaha R $ MXL Strada P-N-P, Yamaha R $ MXL Pista P-N-P, Yamaha R $ MXL Pro P-N-P, Yamaha R $ MXL Strada P-N-P, Kawasaki ZX-6R/ZX-6RR $ MXL Pista P-N-P, Kawasaki ZX-6R/ZX-6RR $

13 MXL Pro P-N-P, Kawasaki ZX-6R/ZX-6RR $ MXL Strada P-N-P, Kawasaki ZX-10R $ MXL Pista P-N-P, Kawasaki ZX-10R $ MXL Pro P-N-P, Kawasaki ZX-10R 03-05* $ *Note: All P-N-P harnesses are special order only MyChron 3 XG-Log CAN ECU harness, pin/m $ MyChron 3 XG-Log RS232 ECU harness, pin/m $ MyChron 3 XG-Log RPM/powr harness, pin/m $ MXL Strada/Pista CAN/RS232 harness, AMP 12-pin/f $ MXL Strada/Pista 8-channel analog harness, AMP 12/16-pin/f $ MXL Pro 8-channel analog harness, Autosport 37-pin/m* $ *Note: special order only; limited availibility MXL Pro expansion harness, Autosport 22-pin/m* $ *Note: special order only; limited availibility MXL Pro channel analog harness, Autosport 37-pin/m $ MXL Pro 05 expansion harness, Autosport 22-pin/m $ MXL/EVO3 Pista/Pro QM logging initializtion switch $ EVO3 Pista CAN/RS232 harness, AMP 12-pin/f $ EVO3 Pista 8-channel analog harness, AMP 12/16-pin/f $ EVO3 Pro 12-channel analog harness, Autosport 37-pin/m $ EVO3 Pro expansion harness, Autosport 22-pin/m $ EVO3 Drack external power/usb switch box $ EVO4 CAN/RS232 ECU harness, pin/m $ EVO4 K-Line ECU harness, pin/m $ 44.00

14 Wiring & Connectors Inductive RPM 1-wire loom, copper core (per meter) $ 2.75 Thermocouple 2-wire loom (per meter) $ 2.10 Data wire, 4-wire loom (per meter) $ 1.75 RPM plug wire clip, nylon $ 1.50 DTM 4-pin/m boot $ 0.48 DTM 4-pin/f boot $ 0.48 DTM 6-pin/m boot $ 0.48 DTM 6-pin/f boot $ 0.48 DTM 4-pin/m (connector/wedgelock/pins), kit $ 3.14 DTM 4-pin/f (connector/wedgelock/sockets), kit $ 2.70 DTM 6-pin/m (connector/wedgelock/pins), kit $ 4.64 DTM 6-pin/f (connector/wedgelock/sockets), kit $ 3.98 DTM 4-pin, pin wedgelock $ 0.10 DTM 4-pin, socket wedgelock $ 0.10 DTM 6-pin, pin wedgelock $ 0.18 DTM 6-pin, socket wedgelock $ 0.18 DTM size 20 pin $ 0.27 DTM size 20 socket $ 0.36 AMP MXL Strada/Pista harness boot $ AMP 12-pin/m $ 3.00 AMP 12-pin/f $ 3.00 AMP 16-pin/m $ 3.00 AMP 16-pin/f $ 3.00 AMP 12/16-pin/m/m (combined) $ Binder 712 barrel, 15.95mm x 8.35mm x 0.50mm $ 2.00 Binder pin/m $ Binder pin/m $ Binder pin/m $ Binder pin/m $ Binder pin/m* $ *Note: special order only Binder pin/f $ Binder pin/f $ Binder pin/f $ Binder pin/f $ Binder pin/f * $ *Note: special order only Binder pin/f socket $ Binder pin/f socket $ Binder pin/f socket $ Binder pin/f socket $ Binder pin/f socket* $ 13.00

15 *Note: special order only Binder 712 tethered socket cover $ 4.00 Binder 712 untethered socket cover $ 4.00 Binder pin/m $ Binder pin/m $ Binder pin/f $ Binder pin/f $ Binder pin/m USB socket $ Binder pin/f USB socket $ Autosport 37-pin/m $ Autosport 37-pin/f $ Autosport 35-pin/m $ Autosport 35-pin/f $ Autosport 22-pin/m $ Autosport 22-pin/f $ OBDII plug 16-pin/m* $ *Note: kit item K-style Mignon thermocouple/m $ 9.00 K-style Mignon thermocouple/f $ 9.00 HRS GPS antenna receptacle/m* $ *Note: special order only HRS GPS antenna receptacle/f* $ *Note: special order only

16 USB & Download Solutions MyChron Light TG/TG-Log, 2.5mm, USB cable $ MyChron 3 Plus/Gold/Dash/XG-Log/EVO3 Pro, 4-pin/m, USB cable $ MXL Strada/Pista/Pro/DaVid SA, 2.5mm, USB cable $ MXL Strada/Pista/Pro/DaVid SA, 3mm, USB cable $ EVO 3 Drack/Pista, pin/m, USB cable $ EVO 4/ECUBridge, pin/m, USB cable $ MyTach USB cable $ MyTach Micro USB-B docking station $ SmartyCam USB cable $ LCU-One analog, DTM 4-pin/s to 9-pin/f, serial cable $ MemoryKey, USB, 32MB $

17 CAN Accessories External power "Y", pin/m to 2-port hub/spade/m $ External power cable, pin/m to spade/m $ CAN relocation hub, pin/m to pin/f $ CAN external power lead, pin/m to spade/m $ CAN line terminator, DTM 6-pin/m $ DataHub $ TCHub $ Channel Expansion Hub $ MyChron 3 Dash* $ *Note: special order only Coiled cord for CAN interface MyChron Light TG Dash* $ *Note: special order only Coiled cord for CAN interface LCU-One LCU-One CAN/analog output $ LCU-One module LCU-One AMP 18-pin CAN/analog harness CAN to analog DTM patch cable CAN terminator plug Lambda/O2 sensor (LSU 4.9) Lambda/O2 sensor bung LCU-One CAN only $ LCU-One module LCU-One mounting bracket Lambda/O2 sensor (LSU 4.9) Lambda/O2 sensor bung LCU-One analog only $ LCU-One module LCU-One mounting bracket Analog patch cable Serial programming cable Lambda/O2 sensor (LSU 4.9) Lambda/O2 sensor bung LCU-One AMP 18-pin CAN harness $ LCU-One AMP 18-pin analog harness $ LCU-One AMP 18-pin CAN/analog harness $ 99.00

18 Lambda/O2 sensor (LSU 4.9) $ GPS Module GPS Module, MXL Pista/Pro $ GPS antenna (4m) GPS antenna, 1.5m (HRS-style) $ GPS antenna, 4m (HRS-style) $ GPS antenna, 1.5m (BNC-style) $ GPS antenna, 4m (BNC-style) $ Formula Steering Wheel Formula Steering Wheel* $ 1, *Note: compatible with EV03 Pista/Pro & EVO4 only

19 Multichron Stopwatch Initial Purchase Multichron Stopwatch* $ *Note: available in black only AiM logo lanyard CR2032 batteries (x2) Repair & Replacement Parts Display board $ Faceplate* $ 5.00 Backplate* $ 5.00 Battery cover* $ 0.25 Face buttons w/ spring* $ 0.10 Top buttons w/ spring* $ 0.10 *Note: replacement plastics/buttons are available in yellow, black, translucent blue, & translucent red Button, short shaft, 4 -prong solder feet $ 2.00 Lens $ 2.00 AiM logo lanyard LCD $ LCD frame $ 0.10 LCD contact strip* $ 1.00 *Note: sold as a pair

20 MyTach Initial Purchase MyTach GPS watch* $ *Note: only available in matte black Docking station USB cable Wall charger Wall charger adapter Roll bar mount

21 MyChron Light Initial Purchase MyChron Light TG 6V, 128KB $ MyChron Light TG 6V (w/o beacon)* $ *Note: lap/split beacon & 12V power adaptor is optional Infrared lap receiver Infrared lap beacon (lap or split) IR beacon 12V power adaptor MyChron Light TG 12V, 128KB $ MyChron Light TG 12V (w/o beacon)* $ *Note: lap/split beacon & 12V power adaptor is optional Infrared lap receiver Infrared lap beacon (lap or split) IR beacon 12V power adaptor MyChron LightTG Log, 8MB $ USB download cable Infrared lap receiver Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Inductive RPM pickup M5 water sensor Patch cable Infrared lap beacon (lap or split) IR beacon 12V power adaptor Repair & Replacement Parts MyChron Light TG 6V, 128KB MCLTG 6V/12V/Log display LCD $ Hirose 2-pin/m 9V battery connector $ 3.00 MCLTG 6V display board $ mm USB receptacle/f $ Rubber USB stopper $ 0.25 MCLTG 6V faceplate $ MCLTG 6V backplate $ IR 6v battery board* $ *Note: for use with MCL TG 6V/12V Infrared plastic case, upper $ 3.00 Infrared plastic case, lower $ 3.00 IR cable, 1.5m Hirose 4-pin/f to Hirose 4-pin/f $ 33.00

22 MyChron Light TG 12V, 128KB MCLTG 6V/12V/Log display LCD $ MCLTG 12V display board $ Hirose 2-pin/m 9V battery connector* $ 3.00 *Note: for use with MCL TG 12V 2.5mm USB receptacle/f $ Rubber USB stopper $ 0.25 MCLTG 12V/Log faceplate $ MCLTG 12V/Log backplate $ IR 6V battery board* $ *Note: for use with MCL TG 6V/12V Infrared plastic case, upper $ 3.00 Infrared plastic case, lower $ 3.00 IR cable, 1.5m Hirose 4-pin/f to Hirose 4-pin/f $ V external power lead, 4-pin/f Hirose, 1.5m $ Digi-Key 12V car power adapter (MCL TG 12V)* $ *Note: optional feature for external power MyChron LightTG Log, 8MB MCLTG 6V/12V/Log display LCD $ MCLTG Log display board $ mm USB receptacle/f $ Rubber USB stopper $ 0.25 MCLTG Log display harness $ MCLTG 12V/Log faceplate (includes button interface) $ MCLTG 12V/Log backplate (includes mounting fittings) $ MCLTG Log junction box case w/ lid/battery door $ MCLTG Log PJB board, 712 5/4/3/4-pin/f sockets $ MCLTG Log MJB board (accepts x1, 9V battery) $ Hirose 2-pin/m 9V battery connector $ 3.00 Hirose 2-pin/f 9V battery connector w/ lead $ 3.00 IR receiver board, Hirose 4-pin/m $ Infrared plastic case, upper $ 3.00 Infrared plastic case, lower $ 3.00 IR cable, 1.5m Hirose 4-pin/f to Hirose 4-pin/f $ 33.00

23 MyChron 3 Initial Purchase MyChron 3 Plus Auto, 8MB, 4-CH $ Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 1/8" NPT TR oil/water temperature sensor (x2) USB download cable 4-channel analog harness Wheel speed input MyChron 3 Plus Moto, 8MB, 4-CH $ Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 1/8" NPT TR oil/water temperature sensor (x2) USB download cable 4-channel analog harness Wheel speed input MyChron 3 Plus P-N-P, 8MB, 4-CH* $ *Note: all P-N-P kits are special order only Available applications: Suzuki GSX-R 600/750/ Honda CBR-R /04 Yamaha R1/R Kawasaki ZX-6R/RR/10R Items included in P-N-P kits- Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor 4-pin, USB download cable MyChron 3 to factory interface harness Throttle position "Y" harness Mounting bracket *Note: items contained with each P-N-P kit vary based on model, year, etc. MyChron 3 Gold Auto, 8MB, 4-CH* $

24 Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 1/8" NPT TR oil/water temperature sensor (x2) USB download cable 4-channel analog harness Wheel speed input Internal lateral accelerometer *Note: internal lateral accelerometer only featured on Auto unit MyChron 3 Gold Moto, 8MB, 4-CH* $ Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 1/8" NPT TR oil/water temperature sensor (x2) USB download cable 4-channel analog harness Wheel speed input Internal lateral accelerometer *Note: internal lateral accelerometer only featured on Auto unit MyChron 3 Gold P-N-P, 8MB, 4-CH* $ *Note: all P-N-P kits are special order only Available applications: Suzuki GSX-R 600/750/ Honda CBR-R /04 Yamaha R1/R Kawasaki ZX-6R/RR/10R Items included in P-N-P kits- Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor 4-pin, USB download cable MyChron 3 to factory interface harness Throttle position "Y" harness Mounting bracket *Note: items contained with each P-N-P kit vary based on model, year, etc. MyChron 3 XG-Log, 8MB, 5-CH* $ 1,079.00

25 Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 1/8" NPT TR oil/water temperature sensor (x2) USB download cable Internal lateral & longitudinal accelerometers Wheel speed input *Note: optional secondary wheel speed input; requires speed signal splitter, sold separately MyChron 3 Visor, 512KB, ECU only* $ *Note: special order only Power/Comm. switch box Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts USB download cable Wheel speed input ECU CAN/RS232 harness Repair & Replacement Parts MyChron 3 Plus Auto/Moto Faceplate $ Backplate w/ connector* $ *Note: includes Autosport connector Backplate w/o connector* $ *Note: plastic back plate only USB strap, 4-pin/f (M3B/P/G/XG-Log/660) $ 1.00 Button, long shaft, 4 -prong solder feet $ 2.00 LCD $ LCD pressure plate, copper $ LCD contact strip $ 1.00 Backlight $ LED* $ 3.00 *Note: price is per LED; colors available include red, yellow, green, & blue MyChron 3 Gold Auto/Moto Faceplate $ Backplate w/ connector* $ *Note: includes Autosport connector Backplate w/o connector* $ *Note: plastic back plate only

26 USB strap, 4-pin/f (M3B/P/G/XG-Log/660) $ 1.00 Button, long shaft, 4 -prong solder feet $ 2.00 LCD $ LCD pressure plate, copper $ LCD contact strip $ 1.00 Backlight $ LED* $ 3.00 *Note: price is per LED; colors available include red, yellow, green, & blue MyChron 3 XG-Log Display board $ MJB board $ PJB board $ Display harness (coiled) $ Faceplate $ Backplate $ USB strap, 4-pin/f (M3B/P/G/XG-Log/660) $ 1.00 Button, long shaft, 4 -prong solder feet $ 2.00 Junction box case (lower) $ 5.50 Junction box case (upper) $ 5.50 LCD $ LCD pressure plate, copper $ LCD contact strip $ 1.00 Backlight $ LED* $ 3.00 *Note: price is per LED; colors available include red, yellow, green, & blue MyChron 3 Dash Display harness (coiled), pin/m $ Faceplate $ Backplate $ USB strap, 4-pin/f (M3B/P/G/XG-Log/660) $ 1.00 Button, long shaft, 4 -prong solder feet $ 2.00 LCD $ LCD pressure plate, copper $ LCD contact strip $ 1.00 Backlight $ LED* $ 3.00 *Note: price is per LED; colors available include red, yellow, green, & blue MyChron 3 Visor Display harness (coiled), pin/m $ Faceplate $ Backplate $ USB strap, 4-pin/f (M3B/P/G/XG-Log/660) $ 1.00 Button, long shaft, 4 -prong solder feet $ 2.00

27 LCD $ LCD pressure plate, copper $ LCD contact strip $ 1.00 Backlight $ LED* $ 3.00 *Note: price is per LED; colors available include red, yellow, green, & blue

28 MXL Initial Purchase MXL Strada, 128KB, 8-CH $ 1, Power/CAN/RS232 harness 16-pin AMP connector w/ pins 3mm USB download cable MXL Strada P-N-P, 128KB, 8-CH* $ 1, *Note: all P-N-P kits are special order only Available applications: Suzuki GSX-R 600/750/ Suzuki Yoshimura GSX-R Suzuki Yoshimura Zero Yamaha R Yamaha R Kawasaki ZX-6R/ZX-6RR Kawasaki ZX-10R Items included in P-N-P kits- MXL to factory interface harness Mounting bracket 3mm USB download cable *Note: items contained with each P-N-P kit vary based on model, year, etc. MXL Strada Icon, 128KB, 8-CH $ 1, Power/CAN/RS232 harness 16-pin AMP connector w/ pins 3mm USB download cable MXL Strada Icon P-N-P, 128KB, 8-CH* $ 1, *Note: all P-N-P kits are special order only Available applications: Suzuki GSX-R 600/750/ Suzuki Yoshimura GSX-R Suzuki Yoshimura Zero Yamaha R Yamaha R Kawasaki ZX-6R/ZX-6RR Kawasaki ZX-10R Items included in P-N-P kits- MXL to factory interface harness Mounting bracket 3mm USB download cable *Note: items contained with each P-N-P kit vary based on model, year, etc. MXL Pista, 8MB, 8-CH $ 1, Infrared lap beacon receiver Infrared lap beacon transmitter

29 IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 3mm USB download cable 12/16-pin, 8-channel analog harness Wheel speed input Internal lateral accelerometer 1/8" NPT TR oil/water temperature sensor (x2) MXL Pista P-N-P, 8MB, 8-CH* $ 1, *Note: all P-N-P kits are special order only Available applications: Suzuki GSX-R 600/750/ Suzuki Yoshimura GSX-R Suzuki Yoshimura Zero Yamaha R Yamaha R Kawasaki ZX-6R/ZX-6RR Kawasaki ZX-10R Items included in P-N-P kits- Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor 3mm USB download cable 8-channel analog harness MXL to factory interface harness Throttle position "Y" harness Mounting bracket Internal lateral accelerometer *Note: items contained with each P-N-P kit vary based on model, year, etc. MXL Pista QM, 8MB, 8-CH $ 1, Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 3mm USB download cable 12/16-pin, 8-channel analog harness MXL QM logging initializtion switch Wheel speed input Internal lateral accelerometer 1/8" NPT TR oil/water temperature sensor (x2) MXL Pro, 16MB, 12-CH $ 2, Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts

30 Patch cable (x2) 3mm USB download cable 37-pin, 12-channel analog harness 22-pin, auxilliary harness Wheel speed input (x4) Internal lateral accelerometer 1/8" NPT TR oil/water temperature sensor (x2) MXL Pro QM, 16MB, 12-CH $ 2, Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 3mm USB download cable 37-pin, 12-channel analog harness 22-pin, auxilliary harness MXL QM logging initializtion switch Wheel speed input (x4) Internal lateral accelerometer 1/8" NPT TR oil/water temperature sensor (x2) Repair & Replacement Parts Faceplate $ Backplate $ Exterior lens $ 5.50 LCD $ LCD pressure plate, copper $ LCD contact strip $ 1.00 Backlight $ LED* $ 3.00 *Note: price is per LED; colors available include red, yellow, green, & blue Button, short shaft, 4 -prong solder feet (MXL) $ 2.00 Rubber button shroud $ mm USB receptacle/f $ mm USB receptacle/f $ 12.00

31 EVO3 Initial Purchase EVO3 Pista, 8MB, 8-CH $ 1, Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 4-pin, USB download cable 12/16-pin, 8-channel analog harness Wheel speed input Internal lateral accelerometer 1/8" NPT TR oil/water temperature sensor (x2) EVO3 Pista QM, 8MB, 8-CH $ 1, Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 4-pin, USB download cable 12/16-pin, 8-channel analog harness MXL QM logging initializtion switch Wheel speed input Internal lateral accelerometer 1/8" NPT TR oil/water temperature sensor (x2) EVO3 Pro, 16MB, 12-CH $ 2, Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 4-pin USB download cable 37-pin, 12-channel analog harness 22-pin, auxilliary harness Wheel speed input (x4) Internal lateral accelerometer 1/8" NPT TR oil/water temperature sensor (x2) EVO3 Pro QM, 16MB, 12-CH $ 2, Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2)

32 3mm USB download cable 37-pin, 12-channel analog harness 22-pin, auxilliary harness MXL QM logging initializtion switch Wheel speed input (x4) Internal lateral accelerometer 1/8" NPT TR oil/water temperature sensor (x2) Repair & Replacement Parts EVO3 Pista, 8MB, 8-CH Logger case (lower), plastic $ 5.50 Logger case (upper), plastic $ 5.50 EVO3 Pro, 16MB, 12-CH Logger case (lower), aluminum Call for price Logger case (upper), aluminum Call for price EVO3 2/4/8/13-CH Rechargable battery* $ *Note: limited quantities available

33 EVO4 Initial Purchase EVO4, 8MB, 5-CH* $ 1, *Note: EVO4 has an optional second wheel speed input w/ addition of "Y" speed splitter GPS antenna (4m) USB download cable CAN/RS232 hanrness RPM/digital out harness EVO4 w/ MyChron 3 Dash, 8MB, 5-CH $ 1, MyChron 3 Dash GPS antenna (4m) USB download cable CAN/RS232 hanrness RPM/digital out harness EVO4 w/ MyChron Light, 8MB, 5-CH $ 1, MyChron Light Dash GPS antenna (4m) USB download cable CAN/RS232 hanrness RPM/digital out harness

34 DaVid Initial Purchase Standard lipstick camera* $ *Note: 20% maximum applied discount on all cameras DaVid Standalone system, 8MB, 5-CH* $ 3, *Note: limited quantities available Video-in cable (x2) Video-out cable Infrared lap beacon receiver Infrared lap beacon transmitter IR lap beacon transmitter 12V power adaptor Speed sensor, magneto-resistive Speed magnet w/ mounting nuts Patch cable (x2) 1/8" NPT TR oil/water temperature sensor (x2) USB download cable Internal lateral & longitudinal accelerometers Single wheel speed input DaVid Slave/SA power cable DaVid camera power cable RCA extension cable (x2) RCA cable (x2) RCA video/audio to Mini-DIN w/ inline mic. LANC auto record DaVid SA ECU CAN/RS232 harness *Note: DaVid system does not include cameras, recording device, or camera mounting options DaVid Slave system* $ 1, *Note: limited quantities available Video-in cable (x2) Video-out cable DaVid Slave/SA power cable DaVid camera power cable DaVid Slave CAN cable (x2; used in paralell) RCA extension cable (x2) RCA cable (x2) RCA video/audio to Mini-DIN w/ inline mic. LANC auto record *Note: DaVid system does not include cameras, recording device, or camera mounting options

35 SmartyCam Initial Purchase SmartyCam (standard) Standalone* $ USB download cable 4GB MicroSD card w/ SD card reader Wall charger Wall charger adapter SmartyCam (wide-angle) Standalone* $ USB download cable 4GB MicroSD card w/ SD card reader Wall charger Wall charger adapter SmartyCam (standard) Slave* $ USB download cable 4GB MicroSD card w/ SD card reader Wall charger Wall charger adapter CAN patch cable (2m or 4m) SmartyCam (wide-angle) Slave* $ USB download cable 4GB MicroSD card w/ SD card reader Wall charger Wall charger adapter CAN patch cable (2m or 4m) *Note: SmartyCam does not include mounting hardware Repair & Replacement Parts Standard replacement lens kit $ Lens Lens gasket Retainer ring Retainer ring screws Wide-angle replacement lens kit $ Lens Lens gasket Retainer ring Retainer ring screws Standard replacement lens $ 8.00

36 Wide-angle replacement lens $ 8.00 Body, plastic $ Backplate w/ 712 socket $ Nose, rubber $ 8.00

37 SmartyCam Accessories Anti-vibration cot-style mount* $ P/N- X90KSSMCC *Note: standard kart mount Cot-style mount w/ 1" ball Trammel band (pair) Anti-vibration cot-style mount kit* $ P/N- X90KSSMC0C *Note: standard kart mount; kit item Cot-style mount w/ 1" ball Trammel band (pair) "V" base w/ integrated mounting ball 60mm receiver arm 33-57mm hose clamp 19-44mm hose clamp Rubber hose clamp sleave Nord-Lock washer set Nord-Lock washer set* $ 1.50 *Note: fits all 1" mounting ball studs "V" bracket roll bar mount* $ P/N- RAM-B-108B *Note: standard automotive mount; kit item "V" base w/ integrated mounting ball 1" mounting ball 60mm receiver arm 33-57mm hose clamp 19-44mm hose clamp Rubber hose clamp sleave Nord-Lock washer set "U" bracket roll bar mount* $ P/N- RAM-B-231ZU *Note: standard kart mount; kit item "U" base w/ integrated mounting ball 1" "U" bolt 1-1/4" "U" bolt 7/16" Nylock nut (x2) Rubber caps (x2) "U" bolt sizing insert Yoke-style mounting clamp w/ mounting ball $ 22.99

38 P/N- RAM-B-121BU 3.3" Diameter suction cup mount w/ mounting ball $ 9.18 P/N- RAM-B-224-1U 6" Double socket arm $ P/N- RAM-B-201U-C 3-3/4" Double socket arm $ P/N- RAM-B-201U 2-1/2" Double socket arm $ P/N- RAM-B-201U-A 1" mounting ball w/ 1/4" -20 alum. stud $ 8.29 P/N- RAM-B-237U 1" mounting ball w/ base- 1/4" -20 alum. stud $ 7.83 P/N- RAM-B-202U

39 ECU Bridge ECU Bridge CAN/RS232 $ USB download cable ECU Bridge CAN/K-Line $ USB download cable ECU Bridge Porsche P-N-P Kit* $ *Note: ECU connections are made via 5-pin, male Autosport connector USB download cable