TRD0359 REV A - Parts Manual 2015 DCN-1363, JAN 09, 2015 SWING-AWAY LATERALS

Transcription

1 SWING-AWAY LATERALS

2 Product/Device Description: Cane Mounted Laterals Device Master Record Document No. DMR-5 Document Rev. A Page of 5 Device No.: D-05. Purpose This record contains references to all top level drawings, instructions, and forms required for the manufacture, installation, inspection, and packaging of the above device. The following documents must be included, either in Section (Device Specific Documents) or Section (Standard Operating Documents): top level assembly drawings and instructions interface drawings outgoing inspection instructions and forms manuals packaging drawings and instructions. Device Specific Documents Device Configurator for D-05-Cxx-Axx Example System MAXX Style Swing Away Multi-Adjustable Laterals Mounting Hardware, ½ H x 5¼ W Right, ½ H x 5¼ W Left with Extensions for both sides Device (Right) = D-05-C0-A0 Device (Left) = D-05-C4-A0 Documents Required: TRC805, TRC806, TRC0-C0, TRC906 Device Configurator for D-05-Bxx Example System Replacement Lateral Pad, ½ H x 5¼ W Device = D-05-B0 Documents Required: TRC0-C0 DMR-0000, Rev B

3 Product/Device Description: Cane Mounted Laterals Device Master Record Document No. DMR-5 Document Rev. A Page of 5 Device No.: D-05 DMR-0000, Rev B

4 Product/Device Description: Cane Mounted Laterals Device Master Record Document No. DMR-5 Document Rev. A Page of 5 Device No.: D-05 ) A) Cxx Lateral Support Cxx # C0 C0 C0 C04 Lateral Support Fixed Mounting 0 Offset, UL MAXX & UL Classic Lateral/System Side Right OR Left Pad Size 8mm x 0mm (¼ H x 4¼ W) 90mm x 5mm (½ H x 5¼ W) 95mm x 46mm (¾ H x 5¾ W) 08mm x 65mm (4¼ H x 6½ W) Lateral Support Hardware Ass y TRC804-C0 Lateral Pad Ass y TRC0-C0 TRC0-C0 TRC0-C0 TRC0-C04 C05 C06 C07 C08 Fixed Mounting 6 Offset, UL MAXX & UL Classic Right OR Left 8mm x 0mm (¼ H x 4¼ W) 90mm x 5mm (½ H x 5¼ W) 95mm x 46mm (¾ H x 5¾ W) 08mm x 65mm (4¼ H x 6½ W) TRC804-C0 TRC0-C0 TRC0-C0 TRC0-C0 TRC0-C04 C09 8mm x 0mm (¼ H x 4¼ W) TRC0-C0 C0 C C C C4 C5 MAXX Style Swing Away Multi- Adjustable Mounting Hardware Right Left 90mm x 5mm (½ H x 5¼ W) 95mm x 46mm (¾ H x 5¾ W) 08mm x 65mm (4¼ H x 6½ W) 8mm x 0mm (¼ H x 4¼ W) 90mm x 5mm (½ H x 5¼ W) 95mm x 46mm (¾ H x 5¾ W) TRC805 TRC806 TRC0-C0 TRC0-C0 TRC0-C04 TRC0-C0 TRC0-C0 TRC0-C0 C6 08mm x 65mm (4¼ H x 6½ W) TRC0-C04 DMR-0000, Rev B

5 Product/Device Description: Cane Mounted Laterals Device Master Record Document No. DMR-5 Document Rev. A Page 4 of 5 Device No.: D-05 Cxx # Lateral Support Lateral/System Side Pad Size Lateral Support Hardware Ass y Lateral Pad Ass y C7 C8 C9 C0 Stealth Swing Away Multi- Adjustable Mounting Hardware UL MAXX Only Right Left 76mm x 7mm ( H x 5 W) 0mm x 5mm (4 H x 6 W) 76mm x 7mm ( H x 5 W) 0mm x 5mm (4 H x 6 W) TRC046 TRC047 TRM0545 TRM0544 TRM0545 TRM0544 C Stealth Hybrid Swing Away Multi- C Adjustable Mounting C Hardware UL Classic C4 Only Right Left 76mm x 7mm ( H x 5 W) 0mm x 5mm (4 H x 6 W) 76mm x 7mm ( H x 5 W) 0mm x 5mm (4 H x 6 W) TRC0879 TRC0880 TRM0545 TRM0544 TRM0545 TRM0544 ) B (Axx) - Select Lateral Hardware Extension Kit (per Lateral Support if applicable) Bxx # Lateral Support Mounting Kit A00 No Extension Required, Fixed, Stealth, Stealth Hybrid N/A A0 MAXX Style Swing Away Multi-Adjustable Mounting Hardware, Right OR Left TRC906 DMR-0000, Rev B

6 Product/Device Description: Cane Mounted Laterals Device Master Record Document No. DMR-5 Document Rev. A Page 5 of 5 Device No.: D-05 ) C (Bxx) Off-Chair Replacement Pads Bxx # Pad Size Pad Kit B0 B0 B0 B04 B05 B06 8mm x 0mm (¼ H x 4¼ W) 90mm x 5mm (½ H x 5¼ W) 95mm x 46mm (¾ H x 5¾ W) 08mm x 65mm (¾ H x 5¾ W) 76mm x 7mm ( H x 5 W) Stealth 0mm x 5mm (4 H x 6 W) Stealth TRC0-C0 TRC0-C0 TRC0-C0 TRC0-C04 TRM0545 TRM0544 Manuals Adjustment Overview: TRD047 Lateral Trunk Support. Standard Operating Documents See DMR-00 Summary of Revision: Rev Author Description Change Order A D. Cross Initial Release N-65 DMR-0000, Rev B

7 EI-F- REV B 0P 00 TRC0 - EPAD - LATERAL PAD KIT NOTES:. CONFIGURATION PARTS ARE LISTED BEFORE COMMON PARTS. PAD SIZE, COVER SIZE PART NUMBER MODEL NUMBER ITEM ITEM 8mm x 0mm (¼" x 4¼") TRX848-8x0 TRS005-8x0 TRC0-C0 EPAD-XS 90mm x 5mm (½" x 5¼") TRX848-90x5 TRS005-90x5 TRC0-C0 EPAD-S 95mm x 46mm (¾" x 5¾") TRX848-95x46 TRS005-95x46 TRC0-C0 EPAD-M 08mm x 65mm (4¼" x 6½") TRX848-08x65 TRS005-08x65 TRC0-C04 EPAD-L 8mm x 0mm (¼" x 4¼") TRX848-8x0 TRS005-8x0 TRC0-C05 90mm x 5mm (½" x 5¼") TRX848-90x5 TRS005-90x5 TRC0-C06 N/A 95mm x 46mm (¾" x 5¾") TRX848-95x46 TRS005-95x46 TRC0-C07 08mm x 65mm (4¼" x 6½") TRX848-08x65 TRS005-08x65 TRC0-C08 TRC0-C0 EPAD-M w/ LATERAL HARDWARE 4¼ TRC0-C0 EPAD-XS STATUS 8 SEP 04 0 SEP 04 PAGE OF 00P-00 INITIAL DRAWING RELEASE RDF-0 0P-00 ADDED KNEE SUPPORT HARDWARE CONFIGURATIONS RDF- ¼ ITEM TRH M6x BUTTON CAP FOR LATERALS TRH M6x6 SOCKET CAP FOR KNEE SUPPORTS Production Release ECN-04, 045, 09 5¼ TRC0-C0 EPAD-S ½ 5¾ ¾ TRC0-C0 EPAD-M 0 6½ TRC0-C07 w/ KNEE SUPPORT HARDWARE TRC0-C04 EPAD-L 4¼ ITEM NO. QTY. PART NO. SEE TABLE METRIC LATERAL PAD SEE TABLE LATERAL PAD COVER, STAR-TEX SEE TABLE M6-.0 CAP SCREW, ALLOY STEEL, BZ TRD059 REV A - Parts Manual 05 N-6, JAN 09, 05

8 TRC804 - FIXED LATERAL SUPPORT HARDWARE ASS'Y, METRIC NOTES:. CONFIGURATION PARTS ARE LISTED BEFORE COMMON PARTS PAGE OF 00P-00 INITIAL DRAWING RELEASE RDF-46 EI-F- REV B 00P 00 STATUS OCT 04 PART NUMBER OFFSET ITEM TRC804-C0 0" - " TRX7 TRC804-C0 " - 6" TRX4 TRC804-C0 TRC804-C ITEM NO. QTY. PART NO. SEE TABLE ADAPTER BRKT, SLOTTED TRX99 4 INCH EXTENSION PLATE TRX74 ADAPTER BRKT, /4-0 4 TRX784 METRIC CLAMPING BAR 5 TRH049 ¼-0 x ½" BUTTON SOCKET CAP, ALLOY STEEL, BZ 6 TRH0457 ¼-0 x /8" BUTTON SOCKET CAP, ALLOY STEEL, BZ 7 TRH0806 M6-.0 x 0mm BUTTON SOCKET CAP, ALLOY STEEL, BZ

9 TRC805 - SWING AWAY HARDWARE ASS'Y, RIGHT, ADJUSTABLE LATERALS FIG. EI-F- REV B 0P 00 PAGE OF STATUS 00P-00 RDF-004 INITIAL DRAWING RELEASE DEC 0 0P-00 ADDED LUBRICATION NOTE; CHANGED ALL HARDWARE TO EP RDF-00 METRIC 8 MAR 04 4 DECAL APPLIED - ARROW POINTING UP 7 LUBRICATE PIN WITH SILICONE GREASE SEE FIG APPLY LOCTITE 4 (BLUE). WIPE OFF EXCESS. SEE FIG. 5 0 FIG. 0 WITH LATCH CLOSED, TIGHTEN SCREW UNTIL CONTACT AND THEN BACK-OFF /8 TURN (45 ) 0 LOWER HOLE NOT USED ITEM NO. QTY. PART NO. TRX786 OUTER LATCH PLATE TRX787 METRIC INNER LATCH PLATE TRX788 THREADED LINK 4 TRX789 ADJUSTABLE LINK 5 TRX7840 PAD PLATE 6 TRX784 METRIC CLAMPING BAR 7 TRX784 METRIC HINGE PIN 8 TRX869 SPRING, CONICAL, 0.00" WIRE ITEM NO. QTY. PART NO. 9 TRL006 DOMED DECAL 0 TRH0 ¼" x ½"OD x 0.07" TH FLAT WASHER, BZ TRH058 M6 NYLOC NUT, BZ TRH0700 M6-.0 x mm BUTTON SOCKET CAP, ALLOY STEEL, BZ TRH0749 M6-.0 x 50mm BUTTON SOCKET CAP, ALLOY STEEL, BZ 4 TRH0787 M5-0.8 x 8mm BUTTON SOCKET CAP, ALLOY STEEL, BZ 5 TRH0805 M6-.0 x 5mm FLAT SOCKET CAP, 0.9 ALLOY STEEL, BZ 6 TRH0806 M6-.0 x 0mm BUTTON SOCKET CAP, ALLOY STEEL, BZ

10 TRC806 - SWING AWAY HARDWARE ASS'Y, LEFT, ADJUSTABLE LATERALS 4 EI-F- REV B 0P 00 PAGE OF STATUS 00P-00 INITIAL DRAWING RELEASE RDF-004 DEC 0 0P-00 ADDED LUBRICATION NOTE; CHANGED ALL HARDWARE TO EP RDF-00 METRIC 8 MAR LUBRICATE PIN WITH SILICON GREASE SEE FIG. 9 0 FIG. 8 0 DECAL APPLIED - ARROW POINTING UP APPLY LOCTITE 4 (BLUE). WIPE OFF EXCESS. SEE FIG. 5 4 FIG WITH LATCH CLOSED, TIGHTEN SCREW UNTIL CONTACT AND THEN BACK-OFF /8 TURN (45 ) LOWER HOLE NOT USED 0 0 ITEM NO. QTY. PART NO. TRX786 OUTER LATCH PLATE TRX787 METRIC INNER LATCH PLATE TRX788 THREADED LINK 4 TRX789 ADJUSTABLE LINK 5 TRX7840 PAD PLATE 6 TRX784 METRIC CLAMPING BAR 7 TRX784 METRIC HINGE PIN 8 TRX869 SPRING, CONICAL, 0.00" WIRE ITEM NO. QTY. PART NO. 9 TRL006 DOMED DECAL 0 TRH0 ¼" x ½"OD x 0.07" TH FLAT WASHER, BZ TRH058 M6 NYLOC NUT, BZ TRH0700 M6-.0 x mm BUTTON SOCKET CAP, ALLOY STEEL, BZ TRH0749 M6-.0 x 50mm BUTTON SOCKET CAP, ALLOY STEEL, BZ 4 TRH0787 M5-0.8 x 8mm BUTTON SOCKET CAP, ALLOY STEEL, BZ 5 TRH0805 M6-.0 x 5mm FLAT SOCKET CAP, 0.9 ALLOY STEEL, BZ 6 TRH0806 M6-.0 x 0mm BUTTON SOCKET CAP, ALLOY STEEL, BZ

11 TRC906 - EXTENSION HARDWARE ASS'Y, ADJUSTABLE LATERALS 00P-00 RDF-46 PAGE OF INITIAL DRAWING RELEASE EI-F- REV B 00P 00 STATUS OCT ITEM NO. QTY. PART NO. TRX788 THREADED LINK TRX789 ADJUSTABLE LINK TRH0 ¼" x ½"OD x 0.07" TH FLAT WASHER, BZ 4 TRH058 M6 NYLOC NUT, BZ 5 TRH0700 M6-.0 x mm BUTTON SOCKET CAP, ALLOY STEEL, BZ 6 TRH0749 M6-.0 x 50mm BUTTON SOCKET CAP, ALLOY STEEL, BZ

12 TRC046 - STEALTH SWING AWAY HARDWARE ASS'Y, RIGHT, UL MAXX PAGE OF 00P-00 INITIAL DRAWING RELEASE RDF-46 EI-F- REV B 00P 00 STATUS OCT 04 INCLUDED WITH TRM0944 REPLACES SCREWS FROM TRM0944 ITEM NO. QTY. PART NO. TRX878 STEALTH LATERAL SHIM TRM0944 LATERAL HARDWARE ASS'Y, RIGHT, STEALTH TRH040 ¼-0 x ¾" SOCKET HEAD CAP, ALLOY STEEL, BZ

13 TRC047 - STEALTH SWING AWAY HARDWARE ASS'Y, LEFT, UL MAXX PAGE OF 00P-00 INITIAL DRAWING RELEASE RDF-46 EI-F- REV B 00P 00 STATUS OCT 04 INCLUDED WITH TRM094 REPLACES SCREWS FROM TRM094 ITEM NO. QTY. PART NO. TRX878 STEALTH LATERAL SHIM TRM094 LATERAL HARDWARE ASS'Y, LEFT, STEALTH TRH040 ¼-0 x ¾" SOCKET HEAD CAP, ALLOY STEEL, BZ

14 TRC STEALTH HYBRID SWING AWAY HARDWARE ASS'Y, RIGHT, UL CLASSIC PAGE OF 00P-00 REVISION CONVERTED FROM - 07 FEB 0 RDF-46 EI-F- REV B 00P 00 STATUS OCT N 4 8 N 6 7 N 0 9 N 7 N NOTES:. N/S = NOT SHOWN. HARDWARE INDICATED TO BE FINISHED BLACK ZINC - SEE SPECIFICATION REFERENCE (ITEM 4) ITEM NO. QTY. PART NO. TRX4547 LONG CLAMP MOUNT, RIGHT TRX455 BUTTON LOCK PEG TRX485 LONG MOUNT ARM, RIGHT 4 TRX486 MOUNT ARM CAP, RIGHT 5 TRX50 COMPRESSION SPRING 6 TRH0089 DOWEL PIN, /6" DIA. X 7/8" 7 TRH06 ¼-0 x ¼" HEX SOCKET SET, ALLOY STEEL, BZ 8 TRH094 ¼-0 x " FLAT SOCKET CAP, ALLOY STEEL, BZ 9 TRH0459 ¼-0 x ½" SOCKET HEAD CAP, ALLOY STEEL, BZ 0 STEALTH MOUNT ARM STEALTH MOUNT ARM CAP STEALTH PAD MOUNT STEALTH CLAMPING BAR 4 N/S REF TRF000 SPECIFICATION REFERENCE, BLACK ZINC

15 TRC STEALTH HYBRID SWING AWAY HARDWARE ASS'Y, LEFT, UL CLASSIC PAGE OF 00P-00 REVISION CONVERTED FROM - 07 FEB 0 RDF-46 EI-F- REV B 00P 00 STATUS OCT N 8 N N 7 N 9 N NOTES:. N/S = NOT SHOWN. HARDWARE INDICATED TO BE FINISHED BLACK ZINC - SEE SPECIFICATION REFERENCE (ITEM 4) ITEM NO. QTY. PART NO. TRX4544 LONG MOUNT ARM, LEFT TRX4545 MOUNT ARM CAP, LEFT TRX4546 LONG CLAMP MOUNT, LEFT 4 TRX455 BUTTON LOCK PEG 5 TRX50 COMPRESSION SPRING 6 TRH0089 DOWEL PIN, /6" DIA. X 7/8" 7 TRH06 ¼-0 x ¼" HEX SOCKET SET, ALLOY STEEL, BZ 8 TRH094 ¼-0 x " FLAT SOCKET CAP, ALLOY STEEL, BZ 9 TRH0459 ¼-0 x ½" SOCKET HEAD CAP, ALLOY STEEL, BZ 0 STEALTH MOUNT ARM STEALTH MOUNT ARM CAP STEALTH PAD MOUNT STEALTH CLAMPING BAR 4 N/S REF TRF000 SPECIFICATION REFERENCE, BLACK ZINC