Height Adjustable Backworking Holders
|
|
- Sharyl Snow
- 5 years ago
- Views:
Transcription
1 16 Insert Systems
2 Insert Systems 17 Technical Information Suitable for Swiss-Lathe back working. Smallest turning diameter possible as a result of height adjustment option. Exact height adjustment +/- 0.4 mm with scale. step = 0.1 mm System design Holders on shanks with deeper slots for the screws can be disassembled without unscrewing the shank.
3 18 Insert Systems Assembling Shank + standard holder HVWP-EXC-IK Shank Standard Holder Shank + Specer Plate + Standard Holder HVWP-ZYL..-IK HVWP-EXC-IK Shank Standard Holder Specer Plate HVD..S.. Length of bolt is dictated by size of the spacer plate HVWP-ZYL..-IK (HVD20S <===> HVWP-ZYL20-IK) Shank + Specer Plate + Holder without eccentric bolt HVWP-ZYL..-IK HVWP-IK-PIN Shank E.g. HVWP-ER16 Specer Plate HVD..S.. There is no difference in assembling a shank or spacer plate with or without coolant
4 Insert Systems 19 - Shanks Standard Shank Standard Shank with Inner Coolant (AK / IK) Pic. 1 Pic. 2 Pic. 3 Pic. 4 Part # D L Picture AK IK Machine Pic. 5 HVD HVD1960 3/ CITIZEN L20/C16/M16 HVD CITIZEN B12 HVD2060AK G1/8'' M12x1.5 HVD HVD TORNOS DECO HVD HVD2270AK * G1/8'' M12x1.5 HVD HVD STAR SA16/SB-16 - TORNOS Gamma 20 STAR SA16/SB-16 - TORNOS Gamma 20 CITIZEN L20 - HANWHA STL32/35H. STL33/35J HVD2560AK G1/8'' M12x1.5 CITIZEN L20 - HANWHA STL32/35H. STL33/35J HVD MANURHIN HVD TORNOS DECO HVD CITIZEN M32/C32/L32 HVD2836CT20-AK G1/8" -- TORNOS CT20 HVD TRAUB TNL 12/16 HVD2885AK G1/8'' M12x1.5 TRAUB TNL 12/16 HVD CITIZEN A32-VII HVD3225HA-AK M8x1 -- HANWHA STL38H HVD3337HA-AK M8x1 -- HANWHA XD20/32 H/J * Without AK AK / IK: With inner coolant. radial / axial More shanks with inner coolant are available on request
5 20 Insert Systems Shanks for STAR Pic. 1 Pic. 2 Pic. 3 Pic. 4 # Pic. 5 # Pic. 6 # ** Part # D L 1 L 2 Pic. AK Machine HVD1620SR-WD STAR SR-16, SST16 HVD2225SR-WD STAR SR-32 HVD2225SR-R HVD2225SR-RWD * HVD2225SR-R-AK M8x1 HVD2225SW-1-AK G1/8'' STAR SB-12 / 20R, SR-20R IV, HVD2225SW-2-AK M8x1 SV-20R, SR-38 Type A / B, SW-12R II, SW-20 HVD HVD HVD3419-AK G1/8" HVD HVD3444-AK G1/8" HVD3439SV HVD3439SV-38-AK G1/8" WD = With Flat STAR SV-38R, ECAS-32 MAIER STAR SV-38-R Pic. 7 Pic. 8 * For STAR-Machinen: SR-10J (Position T22 / T24), SB-16 / 20 Type C / Type E, SB-20 R Type E / Type G / Type N, SR-20J / JN, SR-20 R / II / III, SR-32J / JN, ECAS-12 / 20 SR-20R IV (T21 - T24. overlaps - T25 - T28) # Holder can be screwed or unscrewed without removing the head, see technical information at the beginning of the chapter ** Not height adjustable - 4mm out of center Height adjustable holder overlaps at the SR-20RIV. SW-20 and SB-20R the position below. This holder is out of center in upper direction to prevent this problem. Height adjustment only by Y-axis.
6 Insert Systems 21 VDI-Shanks DIN Part # D B HVD-V HVD-V HVD-V25 25 Spacer Plate Part # D Picture HVD10S 10 1 HVD15S 15 1 HVD20S 20 1 HVD25S 25 1 HVD30S 30 1 With Inner Coolant Pic. 1 Pic. 2 HVD15S-AK HVD20S-AK HVD25S-AK HVD30S-AK Supplied with screws and cylindrical bolt Bolts / Eccentric bolts Part # L Picture Pic. 1 Pic. 2 Pic. 3 HVWP-EXC-IK HVWP-IK-PIN 20 2 HVWP-ZYL10-IK HVWP-ZYL15-IK HVWP-ZYL20-IK HVWP-ZYL25-IK HVWP-ZYL30-IK
7 22 Insert Systems Specer Plate Part # Picture HVD-XS2 1 HVD-X2 2 Pic. 1 Pic. 2 Samples of Applications Application possible right and left Overview: Holders for Inserts... BIMU-040 / BIMU-400 X 23 Threading Inserts - ER16-0 / 15 / 3 24 TC / CC / 32.5) 25 DC / VB / VC / VP / MICRO TURN Cutting Inserts 30 PICCO Cutting Inserts 30 HORN Cutting Inserts 31 APPLITEC TOP 73 / 74 X, TOP 75 / 76 X 32 APPLITEC ECO 25 / 26 X 32 APPLITEC 33 / 34 X 32 Page
8 Insert Systems 23 for BIMU Inserts Left Version Right Version Part # Type Inserts L HVWP-BI040R Right BIMU HVWP-BI040L Left BIMU for BIMU-400 X Inserts BIMU-400 X Insertssitz Part # Type Inserts L Left Version HVWP-BIX-R Right BIMU-400 X 25.6 HVWP-BIX-L Left BIMU-400 X 25.6 HVWPL-BIX-R Right BIMU-400 X 42.6 HVWPL-BIX-L Left BIMU-400 X 42.6
9 24 Insert Systems for Threading Inserts ER16 for Threading Inserts ER16 Part # Type Angle L Picture Pic. 1 Pic. 2 (Right Version) (Right Version Outside) Inserts ER16 ISO HVWP-ER16-0 Right HVWP-ER16-15 Right HVWP-ER16-3 Right HVWPL-ER16-0 Right HVWPL-ER16-15 Right HVWPL-ER16-3 Right HVWPA-ER16-0 Right HVWPA-ER16-15 Right HVWPA-ER16-3 Right HVWPLA-ER16-15 Right HVWPL-EL16-15 for left hand thread Left Pitch angle evaluation: pitch angle = 20 x pitch of thread diameter of thread Most common is 1.5 Type STJC Part # Type Inserts L Right Version HVWPL-STJCR1102 Right TC HVWPL-STJCL1102 Left TC HVWPL-STJCR1103 Right TC HVWPL-STJCL1103 Left TC
10 Insert Systems 25 Type SCLC SCLCL06 (Left Version) SCLCL09 (Left Version) Part # Type Inserts L HVWP-SCLCR06 Right CC HVWP-SCLCL06 Left CC HVWP-SCLCR09 Right CC HVWP-SCLCL09 Left CC Type SDNC SDNCN11 SDNCR11 (Right Version) Part # Type Inserts L HVWP-SDNCN11 centered DC HVWP-SDNCR11 Right DC HVWPL-SDNCR11 Right DC HVWPL-SDNCL11 Left DC
11 26 Insert Systems Type SDJC HVWPA-SDJCR11 (Right Version) SDJCL07 (Left Version) SDJCL11 (Left Version) Part # Type Inserts L HVWP-SDJCR06 Right DC HVWP-SDJCR07 Right DC HVWP-SDJCL07 Left DC HVWPL-SDJCR07 Right DC HVWPL-SDJCL07 Left DC HVWP-SDJCR11 Right DC HVWP-SDJCL11 Left DC HVWPL-SDJCR11 Right DC HVWPL-SDJCL11 Left DC HVWPA-SDJCR11 Right DC HVWPA-SDJCL11 Left DC Type SVNC SVNCR11 (Right Version) HVWPA-SVNCR11 (Right Version außen) Part # Type Inserts L HVWPL-SVNCR11 Right VC HVWPL-SVNCL11 Left VC HVWPA-SVNCR11 Right VC HVWPA-SVNCL11 Left VC
12 Insert Systems 27 Type SVVC, SVUC SVVCN11 SVUCR11 (Right Version) Part # Type Inserts L HVWP-SVVCN11 Centered VC HVWP-SVUCR11 Right VC HVWP-SVUCL11 Left VC Type SVQC Part # Type Inserts L Left Version HVWP-SVQCR11 Right VC HVWP-SVQCL11 Left VC HVWPL-SVQCR11 Right VC HVWPL-SVQCL11 Left VC
13 28 Insert Systems Type SVJB, SVJC, SVJP and SVZC Part # Picture Type Inserts L SVJCL11 SVZCR11 (Left Version) (Right Version) Pic. 1 Pic. 2 HVWP-SVJBR11 1 Right VB HVWP-SVJBL11 1 Left VB HVWPM-SVJBR Right VB HVWP-SVJCR11 1 Right VC HVWP-SVJCL11 1 Left VC HVWPM-SVJBR11 1 Right VC HVWPM-SVJBL11 1 Left VC HVWPL-SVJBR11 1 Right VC HVWPL-SVJBL11 1 Left VC HVWPL-SVJCR11 1 Right VC HVWPL-SVJCL11 1 Left VC HVWPL-SVJPR10 1 Right VP HVWPL-SVZCR11 2 Right VC Spare Parts Insert Type Wrench / Part # Screw / Part # CC T8 A CC T15 A DC T8 A DC T15 A VC T8 A TC T8 A BIMU-040 T8 A BIMU-400 X T9 A02-W3082 Inserts ER16 T9 A
14 Insert Systems 29 Mounting for Insert Tool Holders, 10 x 10 and 12 x 12 Pic. 1 R + L + and Overhead Pic. 2: R + L + and Overhead Part # For Shank Picture HVWP x 10 1 HVWP x 12 2 Backworking Collet Holders ER 11. ER16 Pic. 1 Pic. 2 Part # Type / Range Picture HVWP-ER11 ER11 / 0.5-7mm 1 HVWP-ER16 ER16 / 1-10mm 2
15 30 Insert Systems Backworking MICRO TURN- Holder System Ifanger Sample of application Part # HVWP-IF4 HVWP-IF6 For Shank Ifanger 4mm Ifanger 6mm Backworking For ISCAR PICCO CUT Inserts Holder - Picture 1 Part # HVWP-PIC Pic. 2: Sleeves with bore-ø d = 3-10 mm Pic. 1: Holder Part # Sleeves - Picture 2 RB-PIC RB-PIC RB-PIC RB-PIC d PICCO sleeves are also used for boring bar sleeves - see catalog "reduction sleeves"
16 Insert Systems 31 Backworking Holders for HORN Inserts Type with Extended Clamping Shank Sample of Application Pic. 1 Pic. 2 Part # For insert type HVWP-H HVWP-H105L 105 verlängert Type 110 Type 110 Sample of applications Part # For insert type HVWP-H
17 32 Insert Systems for APPLITEC - Inserts TOP - Line Part # L For insert series HVWP-APL- TOP740-R 26 TOP 74X HVWP-APL- TOP730-L 26 TOP 73X HVWPL-APL- TOP740-R 43 TOP 74X HVWPL-APL- TOP730-L 43 TOP 73X HVWP-APL- TOP760-R 27 TOP 76X HVWP-APL- TOP750-L 27 TOP 75X HVWP-APL- TOP740-R HVWP-APL- TOP760-R HVWPL-APL- TOP760-R 44 TOP 76X HVWPL-APL- TOP750-R 44 TOP 75X ECO - Line HVWP-APL-ECO260-R Part # L For insert series HVWP-APL-ECO260-R 26 ECO 26X HVWP-APL-ECO250-L 26 ECO 25X HVWPL-APL-ECO260- R 43 ECO 26X HVWPL-APL-ECO250-L 43 ECO 25X Line Part # L For insert series HVWP-APL-340-R 26 34X HVWP-APL-330-L 26 33X HVWP-APL-340 HVWPL-APL-340-R 43 34X HVWPL-APL-330-L 43 33X
18 Insert Systems 33 Backworking Double and Triple Holders for Collet Holders ER 11. ER16 Pic. 1 Pic. 2 Pic. 3 Part # For collet holders Picture HVWP-ER2 EM EM HVWP-ER3 EM EM HVWP-ER3-17 EM Sample of Application HVWP - ER2 with 2 Collet holders EM HVWP - ER3 with 3 Collet holders EM HVWP - ER3-17 with 3 Collet holders EM also for EM RB16... also for EM RB16... also for RB16...
Заказ инструмента: 8 (343) Start-up tool kits for new machines
Start-up tool kits for new machines Table of content Introduction... 4 Turning centres Kit contents... 5 External turning shank... 6 External turning shank with high precision coolant... 7 Internal boring
More informationStart-up tool kits for new machines
Start-up tool kits for new machines Get your machine tooled up! A new machine is a major investment, so a short payback time is always welcomed. To make it easy to get started with your new machine, we
More informationSide block mm Combination element to extend or to combine two stoppers
Clamping tools 45 5D workpiece stopper Side block 10-18 mm Combination element to extend or to combine two stoppers Application: One of the various application of the workpiece stopper is as a versatile
More informationJCT Series. Coolant-Through Holders for Small Parts Machining. Excellent Chip Control and Long Tool Life with High Pressure Coolant
JC Series Coolant-hrough Holders for Small Parts Machining Excellent Chip Control and Long ool Life with High Pressure Coolant Capable of Pressure up to 2,900 psi Large Holder Lineup for urning, External
More informationFeatures Benefits. Collets. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and size (reduced collet selection errors).
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 9001/ISO 14001. 1 1 Marking Type and size (reduced collet selection errors). Traceability Lot number marking on all products
More informationCOLLETS. DESCRIPTION DIN 6388 COLLETS Form A For plain straight shank tools QUICK CHANGE TAPPING. ADAPTERS Bilz type. Positive drive adapters
COETS ESCRIPTION Page ESCRIPTION Page IN 88 COETS Form A For plain straight shank tools 5 QUICK CHANGE TAPPING AAPTERS Bilz type Positive drive adapters 2 IN 88 COETS Form E For threaded straight shank
More informationCONVERSION SYSTEMS AND ADAPTERS TO HSK-T
132 133 CONVERSION SYSTEMS AND ADAPTERS TO HSK-T Introduction Designation key 134 Conversion systems, adapters and blanks KS flange adapters 136 137 Extensions and reducers 152 Blanks 153 HSK-T conversion
More informationMultiSwiss 6x16. Machine options. We keep you turning
MultiSwiss 6x16 Machine options We keep you turning Machine options Description Integrated X-Y numerical axes, position 3 Travel ± 15 mm. TB-DECO program is supplied (Not compatible with xxxx) 273-0053
More informationSwissNano. Machine options
SwissNano Machine options Machine options Description Adaptation for F8 collet 216-1010 216-4110 Kit to work without a guide bushing 216-1510 Rotating guide bush, pont length 28 mm 216-1520 Plate for 4
More informationAlberti System LIVE TOOLS
LIVE TOOLS 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com S MARTC HANGE New from, a complete range of live tools with interchangeable
More informationWorkholding. Workholding CHUCKS CENTRES 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS STEEL CENTRES 60º PLAINBACK FITTING CARBIDE CENTRES 60º
CENTRES CHUCKS STEEL CENTRES 60º 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS CARBIDE CENTRES 60º Taper Stock Code MT1 014-101 0.25kg MT2 014-102 0.25kg MT3 014-103 0.5kg MT4 014-104 1kg MT5 014-105 2.5kg
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationPRESSES. Rack and pinion presses. Toggle presses. Impact presses. Pneumatic presses. Rotary indexing table
PRESSES Rack and pinion presses Toggle presses Impact presses Pneumatic presses Rotary indexing table PRESSES Rack and pinion presses HP 40 HP 150 HP 150 T Type HP 40 HP 150 HP 150 T HP 225 T HP 200 Z
More information7 Collet chucks. 7.3 Cylindrical collet chucks 7.13 Rego-Fix nuts 7.19 Rego-Fix Sealing disks 7.23 Rego-fix equipment 7.35 Quick change tool systems
.3 Cylindrical collet chucks.13 Rego-Fix nuts.19 Rego-Fix Sealing disks.23 Rego-fix equipment.35 Quick change tool systems Notes Tél.: +41 32 436 10 50 Fax: +41 32 436 10 55 info@wibemo.ch www.wibemo.ch
More informationINTRODUCES "MINI-TURN" FOR SMALL PART MACHINING.
JANUAY 7 / NEW73 / PAGE 1 OF 7 INTODUCES "MINITUN" FO SMALL PAT MACHINING. Ingerso s new MINITUN amiy as een speciicay esigne or sma par macining appicaions. Te concep is o comine a ig accuracy, groun
More informationmicrun Switzerland TIR of 3 µm ( ) at 3 Diameters assembled Made in Swiss Precision Tools
micrun TIR of 3 µm (0.0001 ) at 3 Diameters assemble Mae in Switzerlan Swiss Swiss MR What is micrun The micrun system is a new prouct esigne for high spee an high accuracy machining applications. A specially
More informationOptical Kit Encoder Page 1 of 7. Description. Features
Description Page 1 of 7 The E2 optical encoder is designed as a direct replacement for the Avago HEDS / HEDM 5500-5600 series. The E2 is a rotary encoder with a rugged glass-filled polymer enclosure, which
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationOptical Kit Encoder Page 1 of 11. Description. Features
Description Page 1 of 11 The E6 Series rotary encoder has a molded polycarbonate which utilizes either a 5-pin or 10-pin latching connector. This optical incremental encoder is designed to easily mount
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationMASTER CATALOG KCPM45.
MASTER CATALOG KCPM45 KSEM Modular Drills KCPM45 Your New Grade for Tough Jobs in Low-Carbon Steel KCPM45 combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating.
More informationHoltest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
More informationBurs Toolholders Toolholders. CAT40 ER20 Collet Chucks, Straight Shank. Collet Extension and Parts. CAT40 ER25 Collet Chucks, Straight Shank
Table of Contents Burs 386 394 408 Cylindrical End Cut SB, Uncoated CAT40 ER20 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Jacobs Taper Holders and Parts 387 395 409 Cylindrical Ball
More informationFor MEGA MICRO CHUCK Available in 0.1mm diameter increments to suit all the cutting tool shank sizes with maximum accuracy. Despite their compact size
MICRO COLLET NEW BABY COLLET NBC ENDMILL COLLET COLLET EJECTOR MEGA E COLLET STRAIGHT COLLET for MILLING CHUCK PERFECT SEAL (MPS / BPS / EPS) PULL STUD BOLT POINT MASTER PRO PMP POINT MASTER PMC POINT
More informationSTORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
More informationTouch Probes for Machine Tools
Touch Probes for Machine Tools October 2010 Touch Probe Systems for Machine Tools Touch probes from HEIDENHAIN were conceived for use on machine tools in particular milling machines and machining centers.
More informationPage 3. Page Page 4. Page 5. Page 6. Page 2. Page 7
Parts manual Verti-Drain 416 Page 01 Code 1640 TM Page 3 Page -10 Page 4 Page Page 6 Page 2 Page Page 8 Page : PTO Page : Tines, adapters and turf hold down kits Page 13: Optional core collector Page
More informationACS LP Series Mechanical-Bearing Rotary Stage
ACS LP Series Rotary Stages ACS LP Series Mechanical-Bearing Rotary Stage Integral pneumatic ER collet chuck Clear aperture for product feed-through Low inertia shaft for maximum acceleration Integral
More informationThis is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
More informationFORMTRACER SV-C3100/4100 Series
Form Measurement Surface Roughness/Contour Measuring System FORMTRACER SV-C3100/4100 Series Catalog No. E4304-525 Dual-purpose measurement and powerful analysis of surface roughness and contours combined
More informationCNC HIGH PRECISION TOOL HOLDER EXTENSIONS
d 1 1 CNC HIGH PRECISION TOO HOER EXTENSIONS With Spring Collet Heat Treated Alloy Steel ER collet chucks used for different projects and applications, save money by not purchasing extra-long tools! Choose
More informationCable Connector Housings for D-Subminiature connectors, Series TMC. Catalog E /04 Edition 1
Cable Connector Housings for D-Subminiature connectors, Series TMC www.erni.com Catalog E 023975 08/04 Edition 1 www.erni.com Catalog E 023975 08/04 Edition 1 Table Of Contents Housing versions KSG 200,
More informationKD-NL. Specialized Machine. Quick Change Stub Tapper. Finger collet assembly P Tap Adapter P. 458
KD-NL Quick Change Stub Tapper Designed for use on KD spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KD-NL in a condition where the tension feature always works
More informationOptical Kit Encoder Page 1 of 9. Description. Features
Description Page 1 of 9 The E5 Series rotary encoder has a rugged glass-filled polymer enclosure with either a 5-pin or 10-pin latching connector. This optical incremental encoder is designed to easily
More informationPELCO SEM Specimen Holders
PELCO SEM Specimen Holders The Modular Concept Hitachi JEOL FEI/Philips ZEISS/LEO TED PELLA, INC. Microscopy Products for Science and Industry The PELCO modular SEM specimen holder system offers the most
More informationFixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe MSY Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA42MSY is able to handle complex machining, with short cycle times
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationGeneral Catalog Unlocking the full potential of your machines
General Catalog Unlocking the full potential of your machines 182 EROWA ITS Compact Combi Three in one Seamless integration into the existing ITS system. The ITS Compact CombiChucks have the same mounting
More informationOur revolving ends for Barfeeders are all assembled with ball bearings providing tight guidence free of any play.
28 Our revolving ends for Barfeeders are all assembled with ball bearings providing tight guidence free of any play. 29 for Manual Barfeeders Part # D M L ESB0450 4.5 M3.5 35 ESB0550 5.5 M4 46 ESB0700
More informationClamps with RUBBER BUSHING
Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example
More informationOptical Kit Encoder Page 1 of 14. Description. Features
Description Page 1 of 14 The E5 Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin finger-latching connector. This optical incremental encoder is designed to easily
More informationToolholders & Accessories
Toolholders & Accessories Contact us for a fast quote. USA Headquarters 364 email: sales@napgladu.com (800) 457-7468 Canada, Montreal (800) 363-9117 Canada, Toronto (888) 251-2236 Table of Contents Toolholders
More informationCAPTO. Switzerland. Made in. Swiss Precision Tools
CAPTO Made in Switzerland Swiss Precision Tools REGO-FIX CAPTO Toolholders As a Certified Sandvik CAPTO manufacturer, REGO-FIX uses new state of the art measuring and grinding systems to create the most
More informationMACHINE TOOL ACCESSORIES
MACHINE TOOL ACCESSORIES ISO TOOLHOLDERS FOR CNC ROUTERS 33-70 Note: Measure the A dimension with the collet in the nut. Dimensions in Millimeters COLLET PULL STUD DESCRIPTION D A F N NUT WRENCH PROVIDED
More informationManual Clamps for Automotive Prototype Production
Manual Clamp interchangeable with 82M-6 This newest version provides more clamp arm variations and in addition two hold open devices. Opening angle can be reduced now. Page 15.2 New products 15.0 Notes
More informationTL Laser Systems for Tool Measurement
TL Laser Systems for Tool Measurement Tool monitoring with a TL laser system is a very flexible solution. The contact-free optical measurement enables you to check even the smallest tools rapidly, reliably
More informationOptical Kit Encoder Page 1 of 14. Description. Features
Page 1 of 14 Description The E5 Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin finger-latching connector. This optical incremental encoder is designed to easily
More informationNEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping
NEW CAPTIS CLAMPING SYSTEM The modular and flexible system for internal and external clamping CAPTIS CLAMPING SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationTSX SCA 64 connection box
connection box General presentation The connection box is used for making connections to a MODBUS, JBUS or JNET bus in 2-wire or 4-wire mode. In 2-wire mode, the following can be connected to the box :
More informationSpiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting operation at a high feed rate and reduced machining time. The tools suit a wide range of applications,
More informationContents EPB Tooling Systems
Contents EPB Tooling Systems Catalogue presentation.............................................. 2-3 Product overview Monobloc and Graflex holders...................... 4-6 Combimaster holders.............................
More informationSpiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Contents: Contents: ISO UN Whitworth BSPT NPT NPTF Spiral Finishing Toolholders Special Tools Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting
More informationTechnical. Scan this QR Code Featured Video
Scan this QR Code Featured Video 223 Lyndex-Nikken Product Warranty Standard Product Lyndex-Nikken Inc., the seller, warrants to the user, who purchases and uses (the User ) the Standard Product, as hereinafter
More informationTouch Probes for Machine Tools
Touch Probes for Machine Tools 09/2018 Touch probes for machine tools Touch probes from HEIDENHAIN are designed for use on machine tools particularly milling machines and machining centers. Touch probes
More informationBoring Bars. SEC-Mini Boring Tool Solid Carbide Bar SUMIDIA Small Hole Boring Bars. SUMIBORON Small Hole Boring Bars.
1 to 77 SC-Boring Tool Series Boring Tools Identification Table Boring Bar Selection Guide 5 Multi-functional Autolathe Tool, Twin ead older 1 Minimal Boring Stop Boring SC-Mini Boring Tool Solid Bar SUMIDIA
More informationServo Auto Collet Spindle SP00AC-SR12000
Servo Auto Collet Spindle SP00AC-SR12000 Applications Deburring Cutting Grinding Surface finish Brushing Polishing Low power buff Drilling Tapping SP00AC-SR12000 - closed loop servo driven pneumatically
More informationExpansible Tapping Holder
Expansible Tapping Holder Floating and expansion design will reducte the differential of motor rotary speed and feeding speed so will extend the life of tap. Use ER High Spring Collet, you don t need to
More informationKF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
More informationSets: Adjustable Mounts
Pedestal Mounts Sets: Adjustable Mounts Square mounting surface Combine complete sets with loose parts and create your own unique design as needed. The angle between the pedestal mount parts can be changed
More informationCLIMB2 DUAL MONITOR SIT/STAND WORKSTATION
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 Rev A 3/17 Model CLIMB2-SLV ASSEMBLY AND ADJUSTMENT CLIMB2 PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationOptical Kit Encoder Page 1 of 17. Description. Features
Description Page 1 of 17 The E6 Series rotary encoder has a molded polycarbonate which utilizes either a 5-pin or 10-pin finger-latching connector. This optical incremental encoder is designed to easily
More informationJCT Series. Coolant-Through Holders. Excellent Chip Control and Long Tool Life with High Pressure Coolant
JCT Series Coolant-Through Holders Excellent Chip Control and Long Tool Life with High Pressure Coolant Large Holder Lineup for Turning, External Grooving, Cut-off and Threading Easy Connection with High
More informationService Parts Diagrams. For Model: 2000i-DVX with the the NEC VT595 MT1060 Projector
Service Parts Diagrams For Model: 000i-DVX with the the NEC VT595 MT060 Projector 000i-DVX Serial numbers with 000i-DVX-R-5000 the NEC VT560 Projector and higher 000i-DVX Serial numbers with 000i-DVX-R-0000
More informationETS / ETA Collets and Nuts
ETS / ETA Collets and Nuts CH 6805 MEZZOVICO Zona Industriale 3 Tel. ++41 (0)91 946 40 70 Fax ++41 (0)91 946 40 47 E-MAIL info@tecnopinz.com WEBSITE www.tecnopinz.com k 1.1.1 Catalogue_ETS_ETA_2018 (V.01.01.2018)
More informationCNC Machining Center. X.mill 640. with Touch-Screen Technology. Travel distances X axis 640 mm Y axis 400 mm Z axis 500 mm. X.
CNC Machining Center with Touch-Screen Technology Travel distances X axis 640 mm Y axis 400 mm Z axis 500 mm The Power Package = compact, powerful, precise and very cost-effective! state-of-the-art GPlus
More informationDrilling Machine. Presenter: G. Tulloch
Drilling Machine Presenter: G. Tulloch Drilling machine A power operated machine tool which holds the drill in its spindle rotating at high speeds and when actuated move linearly against the work piece
More information4-component Dynamometer (RCD)
Force 4-component Dynamometer (RCD) Type 9171A... Rotating for measuring cutting forces in heavy machining The rotating 4-component dynamometer (RCD) Type 9171A... permits the measurement of the forces
More informationTool Holding For improved thread quality - CNC Rigid Tapping TOOL HOLDING
Tool Holding For improved thread quality - CNC Rigid Tapping TOOL HOLDING SynchroFlex Tapping Attachment with unique Double Flexure Unlike other synchronous tap drivers that use soft plastic components
More informationroller shutters ALUMINIUM ROLLER SHUTTERS FOR SPECIAL VEHICLES
roller shutters ALUMINIUM ROLLER SHUTTERS FOR SPECIAL VEHICLES ROLLER SHUTTERS INTRODUCTION The main target of company SRS is to offer competence and reliability to the customers in the production of aluminium
More informationTool Clamping. No > Pressure generators. > Clamping bars. > Pressure-generator accessories. No ** > Clamping heads
Tool Clamping No. 6906P > Pressure generators No. 6906PB** > Pressure-generator accessories No. 6945-22-20 > Clamping bars No. 6945-22 > Spacer bars No. 6945-11-** > Clamping heads No. 6946 > Wedge clamp
More informationUser Manual CARFIT Modular System Series CMB
User Manual CARFIT Modular System Series CMB Table of contents Contents CARFIT Modular System CMB 3 Installation Instructions Example Multimedia Unit Cover 6 1 Mounting support 1 and support 2 7 2 Mounting
More informationPARTS CATALOG 0CR10-M85900EN
PARTS CATALOG 0CR10-M85900EN Last update Jul., 2013 Contents Fig. No. Fig. Name Fig. No. Fig. Name SD60 1. DRIVE(SD60) 2. UPPER HOUSING 3. INPUT SHAFT 4. SHIFT LEVER 5. SUPPORT(REMOTE CONTROL) 6. LOWER
More informationTouch Probes For Machine Tools
Touch Probes For Machine Tools 09/2017 Touch probes for machine tools Touch probes from HEIDENHAIN were conceived for use on machine tools in particular milling machines and machining centers. Touch probes
More information35016 Spare scriber, carbide-equipped.
35010 Surface Gauges Measuring and laying-out tools, gauges Without graduation, round base with smooth bottom, scriber with universal joint adjustable independent of the bar 35010 Scribing height Beam
More informationROVI EXPANDING COLLETS
ROVI EXPANDING COLLETS For 5C, 16C and 3J Spindles and Fixtures Diameters of.065" through 6" 800-423-5145 Expanding Collet Accessories Rovi Reworking Tools Plus Mini Collet Turning Ring Reworking Sleeve
More informationTDQ K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit
TDQ612075-K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit Ex GST Inc GST $3,290.00 $3,619.00 ORDER CODE: MODEL: Type: W07705 TDQ612075-K1 Rhino Cart
More information«АВТОП» Latch RH1 Locks. Plate Control. Static Fmax newton Dynamic Fmax newton. Latch locks
Latch locks KL Static Fmax. 40000 newton Dynamic Fmax. 16000 newton REF L La Lb l1 Includes Does not include KL 1-2-90 90 117 137 172 KF/KK/KV KU KL 1-2-170 170 197 217 252 KF/KK/KV KU KL 1-2-220 220 247
More informationTechnical Data Sheet Screw Clamps and Universal Clamps
Technical Data Sheet Screw Clamps and Universal Clamps Stepless Screw Clamps PG 178 2 PG 178 for small diameters PG 178 for big diameters Bridge Tongue-in-groove design Interlock with multiple diameter
More informationHigh Productivity with Newly Designed Wiper Edge Geometry
Positive Wiper Insert High Productivity with Newly Designed Wiper Edge Geometry Excellent Surface Roughness and Smooth Chip Control During High Feed Machining High Quality Surface Finish with No Galling
More informationLinear Positioning Torque Arm User Manual
15700 S. Waterloo Road Cleveland, OH 44110-3898 Phone: (888) 486-6163 Fax: (216) 481-4519 2015 Jergens, Inc. All Rights Reserved Revision Date: 3/30/2016 Email: asginfo@asg-jergens.com Web: www.asg-jergens.com
More informationPERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
More informationMulti-axial miniature joystick based on Hall Effect technology
Joystick with grip Multi-axial miniature joystick based on Hall Effect technology J... + space-saving design + highly reliable and long lifetime due to contactless Hall Effect technology + integrated third
More informationMeasuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
More informationSPARE PARTS LIST. v.3
SPARE PARTS LIST v. Parts list chassis Hose connection /8 0 2 Sliding valve Sliding valve Sliding valve 5 Quick coupling female 27 Quick coupling male 7 Barrel nipple /8 29 8 Handle complete see page 9
More informationModular Structural Parts
Even complicated residual limb positions are easy to supply, moreover there are manifold options to do so. We offer a wide variety of elaborate modular structural parts that enable you to align functional
More informationEnglish English English English English. HEXACON Pag. 1
English English English English English HEXACON Pag. 1 Precision Measuring Instruments HEXACON Pag. 2 0,001mm Contents Page Pre cision Measuring Heads PMK - 2 point heads - 3 point heads - multi - point
More informationService Parts Diagrams. For Model: 2000i-DVS with the NEC VT465 Projector 2000i-DVS with the NEC VT470 Projector
Service Parts Diagrams For Model: 000i-DVS with the NEC VT65 Projector 000i-DVS with the NEC VT70 Projector Service Parts Diagrams for the Rear Projection SMART Board 000i-DVS Interactive Whiteboard Identifying
More informationProducts Catalogue I. Mounting runners and components:
I. Mounting runners and components: 110111-R Mounting runner 40*40 mm M8 slot nut / M10 bolt length: 6.100 mm span width as per statics 110111-N 110112-R Mounting runner 40*40 mm with sideward screw channel
More informationInstallation Guide GE Healthcare Solar 8000M Keypad Mounting Kit for 15'' and 18'' Flat Panel Displays
Installation Guide GE Healthcare Solar 8000M Keypad Mounting Kit for 15'' and 18'' Flat Panel Displays The purpose of this guide is to: 1. Describe attachment of Keypad to Keypad Mounting Bracket (page
More informationPRODUCT DIVISION: CNC-Education Concept TURN 60 DATE: March 29, 2018 page 1 of 16 TECHNICAL SPECIFICATION. Concept TURN 60
DATE: March 29, 2018 page 1 of 16 TECHNICAL SPECIFICATION Concept TURN 60 PC-controlled slant-bed lathe for the universal CNC education Control software SINUMERIK OPERATE 840D sl / 828 GE FANUC Series
More informationService Parts Diagrams
Service Parts Diagrams For Model: 000i-DVX with the NEC MT00 Projector 000i-DVX with the NEC VT0 Projector 000i-DVX with the NEC VT70 Projector Service Parts Diagrams for the Rear Projection SMART Board
More informationSHRINK FIT TOOLHOLDER TECHNOLOGY CV40 SHRINK FIT HOLDERS - INCH & METRIC 36 CV50 SHRINK FIT HOLDERS - INCH & METRIC 37-38
SHRINK FIT TOOLHOLDER TECHNOLOGY 34-35 CV4 SHRINK FIT HOLDERS - INCH & METRIC 36 CV5 SHRINK FIT HOLDERS - INCH & METRIC 37-38 BT4 SHRINK FIT HOLDERS - INCH & METRIC 39 HSK63A SHRINK FIT HOLDERS - INCH
More informationBG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c
BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents
More informationTouch Probes for Machine Tools
Touch Probes for Machine Tools September 2015 Touch probes for machine tools Touch probes from HEIDENHAIN were conceived for use on machine tools in particular milling machines and machining centers. Touch
More informationA2K. Absolute Optical Encoder: Kit Version Page 1 of 7. Description. Features
Description Page 1 of 7 The A2K optical encoder is a 12 bit absolute rotary kit style encoder which reports a shaft angle within a single 360 degree rotation of a shaft. The kit style A2K allows the encoder
More informationSAFETY EQUIPMENT EARTHING AND SHORT-CIRCUITING DEVICES angled, ball Ø20 or 25 mm EN/IEC (DIN VDE 0683 Part 100) and DIN Part 1
Points Installation Storage Phase and Earthing Points ball points, straight and angled, ball Ø20 or 25 mm EN/IEC 61230 (DIN VDE 0683 Part 100) and DIN 48088 Part 1 Suitable for fixing cable lugs or connecting
More informationSCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL
SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL Page INTRODUCTION Thank you for purchasing the Schneider Optics DiStar+HD projector lens. With the Schneider DiStar focus mount,
More informationMK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
More informationMarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
More informationMarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
More information