Timers CT Range. Electronic timers. Electronic timers. Phone: Fax: Web: -

Transcription

1 Elecronic imers Timers Elecronic imers

2 General informaion Elecronic imers Overview CT-D range CT-E range CT-S range Timing funcion mulifuncional single-funcional mulifuncional single-funcional mulifuncional single-funcional A ON-delay CT-MFD CT-ERD CT-MFE, CT-MKE CT-ERE, CT-EKE CT-MVS, CT-MFS, CT-MBS, CT-WBS CT-ERS B OFF-delay CT-MFD CT-AHD CT-MFE CT-AHE, CT-ARE, CT-AKE CT-MVS, CT-MFS, CT-MBS AB ON- and OFF-delay CT-MVS, CT-MXS, CT-MFS, CT-MBS CA Impulse-ON CT-MFD CT-VWD CT-MFE, CT-MKE CT-VWE CT-MVS, CT-MFS, CT-MBS, CT-WBS CB Impulse-OFF CT-MFD CT-AWE CT-MVS, CT-MFS, CT-MBS CE Impulse-ON and OFF CT-MXS DA DB Flasher saring wih ON Flasher saring wih OFF CT-MFD CT-EBD CT-MFE, CT-MKE CT-MFS, CT-MBS, CT-WBS CT-MFD CT-MFE, CT-MKE CT-EBE CT-MFS, CT-MBS, CT-WBS CT-APS, CT-AHS, CT-ARS, CT-VBS DE Flasher CT-MVS saring wih ON or OFF ED Pulse generaor saring wih ON or OFF CT-TGD CT-MXS H Pulse former CT-MFD CT-MFE CT-MVS, CT-MFS, CT-MBS F Sar-dela change-over CT-SDD, CT-SAD CT-SDS FC Sar-dela change-over wih impulse FA Sar-dela change-over wice ON-delayed A+ AC BC G furher funcions (depending on device) CT-SDE CT-YDE CT-MVS.2x, CT-MFS, CT-MBS CT-MVS, CT-MXS, CT-MFS, CT-MBS, CT-WBS G Swiching relay CT-IRE CT-IRS Technical daa (exrac) Time ranges 7 (0.05 s h) CT-SDD, CT-SAD: 4 (0.05 s - 10 min) Mulifuncion devices: 8 (0.05 s h) Single-funcion devices: 5 single ranges ( s, s, s, s, min) Conrol supply volage Wide and muli ranges Wide ranges Single and dual ranges Type and number of conacs Conrol inpus 1 or 2 c/o conacs CT-SDD, CT-SAD: 2 n/o conacs volage-relaed riggering, polarized, capable of swiching a parallel load 1 c/ o conac CT-SDE: 1 n/o conac and 1 n/c conacs CT-MKE, CT-EKE, CT-AKE: 1 hyrisor volage-relaed riggering, polarized CT-MFE, CT-AHE, CT-AWE: wih auxiliary volage 10 (0.05 s h) CT-ARS, CT-SDS: 7 (0.05 s- 10 min) Wide, muli and single ranges 1 or 2 c/o conacs CT-MVS.21, CT-MFS, CT-MBS: 2nd c/o conac selecable as ins. conac CT-SDS: 2 n/o conacs volage-relaed riggering, non-polarized, capable of swiching a parallel load CT-MFS, CT-MBS, CT-AHS: vol-free riggering

3 General informaion Elecronic imers Approvals and marks Timers J exising j pending CT-D Approvals CT-MFD.12 CT-MFD.21 CT-ERD.12 CT-ERD.22 CT-AHD.12 CT-AHD.22 CT-VWD.12 CT-EBD.12 CT-TGD.12 CT-TGD.22 CT-SDD.22 CT-SAD.22 A UL 508, CAN/CSA C22.2 No.14 J J J J J J J J J J J J D GOST J J J J J J J J J J J J K CB scheme J J J J J J J J J J J J E CCC J J J J J J J J J J J J Marks a CE J J J J J J J J J J J J b C-Tick J j J j J j J J J j j j J exising j pending CT-E Approvals CT-MFE CT-ERE CT-AHE CT-ARE CT-VWE CT-AWE CT-EBE CT-YDE CT-SDE CT-IRE CT-MKE CT-EKE CT-AKE A UL 508, CAN/CSA C22.2 No.14 J J J J J J J J J J J J J C GL J J J J J J J J J J J J J D GOST J J J J J J J J J J J J J K CB scheme J J J J J J J J J J E CCC J J J J J J J J J J L RMRS J J J J J J J J J J J J J Marks a CE J J J J J J J J J J J J J b C-Tick J J J J J J J J J J J J J J exising j pending CT-S Approvals CT-MVS.12 CT-MVS.2x CT-MXS.22 CT-MFS.21 CT-MBS.22 CT-WBS.22 CT-ERS.12 CT-ERS.2x CT-APS.12 CT-APS.2x CT-AHS.22 CT-ARS.11 CT-ARS.21 CT-VBS.1x CT-SDS.2x CT-IRS.1x CT-IRS.2x CT-IRS.3x A UL 508, CAN/CSA C22.2 No.14 J J J J J J J J J J J J J J J C GL J J J J J J J J J J J j j J D GOST J J J J J J J J J J J J J J J J J J K CB scheme J J J J J J J J J J J J J J J J J J E CCC J J J J J J J J J J J J J J J J J J Marks a CE J J J J J J J J J J J J J J J J J J b C-Tick J J J J J J J J J J J J J J J J J J

4 CT-D Range Timers CT-D Range Elecronic imers

5 Characerisics Diversiy: 2 mulifuncion imers 10 single-funcion imers Conrol supply volages: Wide range: V AC/DC Muli range: V DC, 7 ime ranges from 0.05s o 100 h or 4 ime ranges from 0.05 s - 10 min Widh of only 17.5 mm Ligh-grey housing in RAL 7035 Devices wih: 1 c/o conac (250 V / A) or 2 c/o conacs (250 V / 5 A) Conrol inpu: volage-relaed riggering, polarized, capable of swiching a parallel load Approvals / Marks (parly depending) A, D, K, E / a, b Benefis Direc reading scales 1 Direc seing of he ime delay wihou any addiional calculaion provides accurae ime delay adjusmen. LEDs for saus indicaion 2 All acual operaional saes are displayed by fron-face LEDs, hus simplifying commissioning and roubleshooing. Swiching currens The CT-D range imers allow an oupu load of up o A on devices wih 1 c/o conac and up o 5 A on devices wih 2 c/o conacs. Connecion erminals 3 Wide erminal spacing allows connecion of wires: 2 x 1.5 mm² (2 x 1 AWG) wih wire end ferrules or - 2 x 2.5 mm² (2 x 14 AWG) wihou ferrules. Widh 17,5 mm 4 Wih heir widh of 17.5 mm only, he CT-D range imers are ideally suied for insallaion in disribuion panels. Operaing conrols 1 LEDs for saus indicaion U - : V conrol supply volage applied W iming R, R1, R2 - yellow LED: V oupu relay energized 2 Time range adjusmen 3 Fine adjusmen of he ime delay 4 Timing range selecor 2 4 muli-funcional single-funcional

6 CT-D Range Ordering deails Timers Descripion The CT-D range wih a widh of only 17.5 mm fis ino all domesic insallaion and disribuion panels. For maximum flexibiliy in operaion, 10 single-funcion as well as 2 mulifuncion devices wih 7 iming funcions are available. The devices offer 4 or 7 ime ranges from 0.05 seconds up o 100 hours. Their wide inpu range allows he use in applicaions worldwide. Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol inpu Oupu Reference code Caalog number Weigh (1 pce) kg (lb) CT-MFD.12 A B CA CB DA DB H V DC 7 (0.05 s h) 1 c/o CT-MFD.12 1SVR500020R (0.132) A B CA CB DA DB H V AC/ DC 7 (0.05 s h) 2 c/o CT-MFD.21 1SVR500020R (0.143) A 1 c/o CT-ERD.12 1SVR500100R (0.132) A 2 c/o CT-ERD.22 1SVR500100R (0.143) B 7 (0.05 s h) 1 c/o CT-AHD.12 1SVR500110R (0.132) CT-ERD.22 B 2 c/o CT-AHD.22 1SVR500110R0100 CA V DC 1 c/o CT-VWD.12 1SVR500130R0000 DA 1 c/o CT-EBD.12 1SVR5000R (0.143) 0.00 (0.132) A B CA CB DA DB H ED F ON-delay OFF-delay Impulse-ON Impulse-OFF Flasher saring wih ON Flasher saring wih OFF Pulse former Pulse generaor Sar-dela change-over ED 1 c/o CT-TGD.12 1) 1SVR50010R (0.132) 2 x 7 (0.05 s h) ED 1 c/o CT-TGD.22 1) SVR50010R0100 (0.143) F 2 n/o CT-SDD.222) 1SVR500211R (0.05 s - 10 min) F 2 n/o CT-SAD.22 3) 1SVR500210R0100 (0.143) 1) ON and OFF imes adjusable independenly: 2 x 7 ime ranges 0.05 s h 2) Transiion ime 50 ms fixed 3) Transiion ime adjusable used expression alernaive expression(s) used expression alernaive expression(s) 1 c/o conac SPDT volage-relaed we / non-floaing 2 c/o conacs DPDT vol-free dry / floaing

7 Remarks Legend G Conrol supply volage no applied / Oupu conac open B Conrol supply volage applied / Oupu conac closed -Y1/B1 Conrol inpu wih volage-relaed riggering Terminal designaions on he device and in he diagrams The 1s c/o conac is always designaed -1/18. The 2nd c/o conac is designaed 25-2/28. The n/o conacs of he sar-dela imers are designaed wih and Conrol supply volage is always applied o erminals -. Funcion of he yellow LED The yellow LED R glows as soon as he oupu relay energizes and urns off when he oupu relay de-energizes. A ON-delay (Delay on make) CT-ERD, CT-MFD This funcion requires coninuous conrol supply volage for iming. Timing begins when conrol supply volage is applied. The flashes during iming. When he seleced ime delay is complee, he oupu relay energizes and he flashing urns seady. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y1/B1 of he CT-MFD is disabled when his funcion is seleced , , 25-2 = adjused ime delay < B OFF-delay wih auxiliary volage (Delay on break) CT-AHD, CT-MFD This funcion requires coninuous conrol supply volage for iming. If conrol inpu -Y1/B1 is closed, he oupu relay energizes immediaely. If conrol inpu -Y1/B1 is opened, he ime delay sars. The flashes during iming. When he seleced ime delay is complee, he oupu relay de- energizes and he flashing urns seady. If conrol inpu -Y1/B1 recloses before he ime delay is complee, he ime delay is rese and he oupu relay does no change sae. Timing sars again when conrol inpu -Y1/B1 re-opens. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y1/B1-18, , 25-2 < = adjused ime delay CA Impulse-ON (Inerval) CT-VWD, CT-MFD This funcion requires coninuous conrol supply volage for iming. The oupu relay energizes immediaely when conrol supply volage is applied and de-energizes afer he se pulse ime is complee. The flashes during iming. When he seleced pulse ime is complee, he flashing urns seady. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y1/B1 of he CT-MFD is disabled when his funcion is seleced. CB Impulse-OFF wih auxiliary volage (Trailing edge inerval) CT-MFD This funcion requires coninuous conrol supply volage for iming. If conrol supply volage is applied, opening conrol inpu -Y1/B1 energizes he oupu relay immediaely and sars iming. The flashes during iming. When he seleced pulse ime is complee, he oupu relay de-energizes and he flashing urns seady. Closing conrol inpu -Y1/B1, before he ime delay is complee, de-energizes he oupu relay and reses he ime delay. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese , , < -Y1/B1-18, , 25-2 < = adjused pulse ime = adjused pulse ime

8 Flasher, saring wih he ON ime (Recycling equal imes, ON firs) CT-EBD, CT-MFD Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an ON ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y1/B1 of he CT-MFD is disabled when his funcion is seleced. DB Flasher, saring wih he OFF ime (Recycling equal imes, OFF firs) CT-MFD Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an OFF ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y1/B1 of he CT-MFD is disabled when his funcion is seleced , , , , 25-2 = adjused flashing ime = adjused flashing ime H Pulse former (Single sho) CT-MFD This funcion requires coninuous conrol supply volage for iming. Closing conrol inpu -Y1/B1 energizes he oupu relay immediaely and sars iming. Operaing he conrol conac swich -Y1/B1 during he ime delay has no effec. The flashes during iming. When he seleced ON ime is complee, he oupu relay de-energizes and he flashing urns seady. Afer he ON ime is complee, i can be resared by closing conrol inpu -Y1/ B1. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. DE Pulse generaor, saring wih he ON or OFF ime (Recycling unequal imes, ON or OFF firs) CT-TGD This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage, wih open conrol inpu -Y1/B1, sars iming wih an ON ime firs. Applying conrol supply volage, wih closed conrol inpu - Y1/B1, sars iming wih an OFF ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. The ON & OFF imes are independenly adjusable. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y1/B1 - -Y1/B1-18, , , , = adjused pulse ime 1 = adjused OFF ime 2 = adjused ON ime

9 F Sar-dela change-over (Sar-dela saring) CT-SDD, CT-SAD This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage o erminals -, energizes he sar conacor conneced o erminals and begins he se saring ime 1. The flashes during iming. When he saring ime is complee, he firs oupu conac de-energizes he sar conacor. Now, he ransiion ime 2 sars. When he ransiion ime is complee, he second oupu conac energizes he dela conacor conneced o erminals The dela conacor remains energized as long as conrol supply volage is applied o he uni = adjused saring ime 2 = ransiion ime CT-SDD: 2 = 50 ms CT-SAD: 2 adjusable L1 F3 L1 L2 L3 F F S I S K1T K K K K K K K K F N K1T K1 K3 K2 Y i N W1 V1 U1 -M1 M 3 ~ W2 V2 U2 Conrol circui diagram Power circui diagram

10 A CT-ERD Y1/B1 25 Y1/ B1 25 Y1/ B Y1/B Supply: V AC/DC -1/18 1. c/o conac 25-2/28 2. c/o conac -Y1/B1 Conrol inpu Supply: V DC or -1/18 1. c/o conac -Y1/B1 Conrol inpu Supply: V DC or -1/18 1. c/o conac 25-2/28 2. c/o conac Supply: V DC or -1/18 1. c/o conac B CT-AHD.12 CA CT-VWD.12 DA CT-EBD Y1/B1 Y1/ B1 25 Y1/ B Y1/B Supply: V DC or -1/18 1. c/o conac 25-2/28 2. c/o conac -Y1/B1 Conrol inpu - Supply: V DC or -1/18 1. c/o conac -Y1/B1 Conrol inpu - Supply: V DC or -1/18 1. c/o conac - Supply: V DC or -1/18 1. c/o conac ED CT-TGD.22 ED CT-TGD.12 F CT-SDD.22 F CT-SAD Y1/B Y1/ B1 25 Y1/ B Y1/B Supply: V DC or -1/18 1. c/o conac 25-2/28 2. c/o conac -Y1/B1 Conrol inpu - Supply: V DC or -1/18 1. c/o conac -Y1/B1 Conrol inpu - Supply: V DC or n/o conac (sar conacor) n/o conac (dela conacor) - Supply: V DC or n/o conac (sar conacor) n/o conac (dela conacor)

11 Inpu circui - Supply circui CT-D wih 1 c/o conac CT-D wih 2 c/o conacs CT-MFD.21 Raed conrol supply volage U s / V DC V AC/DC Raed conrol supply volage U S olerance % Raed frequency AC/DC versions DC or 50/0 Hz AC versions 50/0 Hz Frequency range DC or 47-3 Hz Typical curren / power consumpion see daa shee Power failure buffering ime min. 20 ms min. 30 ms Inpu circui - Conrol circui Kind of riggering volage-relaed riggering Conrol inpu, Conrol funcion -Y1/B1 sar iming exernal Parallel load / polarized yes / yes Raed operaional volage U e 250 V Minimum swiching volage / minimum swiching curren 12 V / 100 ma Maximum swiching volage / maximum swiching curren see load limi curves Minimum conrol pulse lengh 30 ms Conrol volage poenial see raed conrol supply volage Curren consumpion of he conrol inpu max. 4 ma see daa shee Timing circui 1.) s 2.) s 3.) s 4.) min 7 ime ranges 0.05 s h Time ranges 5.) min.) h 7.) h 4 ime ranges 0.05 s - 10 min (CT-SDD, CT-SAD) 1.) s 2.) s 3.) s 4.) min Recovery ime < 50 ms Accuracy wihin he raed conrol supply volage olerance i < % / V Accuracy wihin he emperaure range i < 0.0 % / C Repea accuracy (consan parameers) i < ± 0.5 % Sar-dela ransiion ime CT-SDD / CT-SAD fixed 50 ms / adjusable: ms in seps of 10 ms Sar-dela ransiion ime olerance CT-SDD / CT-SAD ±3 ms Indicaion of operaional saes Conrol supply volage / iming U: V: conrol supply volage applied W: iming Relay saus R: yellow LED V: oupu relay energized Oupu circui -1/18 Relay, 1 c/o conac - Kind of oupu -1/18; 25-2/28 - Relay, 2 c/o conacs 17-18; relay, 2 n/o conacs (CT-SDD, CT-SAD) Conac maerial Cd-free, see daa shee Raed operaional volage U e IEC/EN V Minimum swiching volage / minimum swiching curren 12 V / 100 ma Maximum swiching volage / maximum swiching curren see load limi curves AC12 (resisive) a 230 V A 5 A 0.75 A Raed operaional curren I e AC (inducive) a 230 V 3 A 3 A (IEC/EN ) (AC n/c conac) AC (inducive) a 230 V A 5 A DC13 (inducive) a 24 V 2 A 2 A 1) 1 A Uilizaion caegory Raing Code) B 300 C 300 max. raed operaional volage 300 V AC AC raing (UL 508) Maximum coninuous hermal curren a B300 5 A 2.5 A Mechanical lifeime Elecrical lifeime Max. fuse raing o achieve shor-circui proecion (IEC/EN ) max. making/breaking apparen power a B300 n/c conac n/o conac 300 VA / 30 VA 1800 VA / 180 VA 30 x 10 swiching cycles 0.1 x 10 swiching cycles A fas-acing 10 A fas-acing

12 CT-D wih 1 c/o conac CT-D wih 2 c/o conacs General daa Duy ime 100% Dimensions (W x H x D) 17.5 x 70 x 58 mm (0.9 x 2.7 x 2.28 in) 17.5 x 80 x 58 mm (0.9 x 3. x 2.28 in) CT-MFD.21 Weigh see ordering deails Mouning DIN rail (IEC/EN 07), snap-mouning wihou any ool Mouning posiion any Minimum disance o oher unis horizonal / verical no / no Degree of proecion housing / erminals IP50 / IP20 Elecrical connecion 2 x mm 2 (2 x 20-1 AWG) fine-srand wih(ou) wire end ferrule 1 x mm2 (1 x AWG) Wire size 2 x mm2 (2 x 20-1 AWG) rigid 1 x mm2 (1 x AWG) Sripping lengh 7 mm (0,28 in) Tighening orque Nm Environmenal daa Ambien emperaure range operaion / sorage C / C Damp hea (cyclic) IEC/EN x 24 h cycles, 55 C, 95 % RH Vibraion (sinusoidal) IEC/EN m/s 2, 20 cycles, Hz Shock (half-sine) IEC/EN m/s 2, 11 ms Isolaion daa Raed impulse wihsand volage U imp beween all isolaed circuis VDE 0110, IEC/EN kv; 1.2/50 µs Polluion caegory IEC/EN 04-1, VDE Overvolage caegory IEC/EN 04-1, VDE 0110 III inpu circui / oupu circui 300 V Raed insulaion volage U i oupu circui 1 / oupu circui V Basic insulaion (IEC/EN 1140) inpu circui / oupu circui 300 V Proecive separaion (VDE 010 par 101 and par 101/; IEC/EN 1140) inpu circui / oupu circui 250 V Power-frequency wihsand volage es (es volage, rouine es) beween all isolaed circuis 2.5 kv, 50 Hz, 1 s Sandards Produc sandard IEC , EN , DIN VDE 0435 par 2021 Low Volage Direcive 200/95/EC EMC Direcive 2004/108/EC RoHS Direcive 2002/95/EC Elecromagneic compaibiliy Inerference immuniy o IEC/EN , IEC/EN elecronic discharge IEC/EN Level 3 ( kv / 8 kv) radiaed, radio-frequency. elecromagneic filed IEC/EN Level 3 (10 V / m) elecrical fas ransien/burs IEC/EN Level 3 (2 kv / 5 khz) surge IEC/EN Level 4 conduced disurbances, induced by radio-frequency fi elds IEC/EN Level 3 (10 V) Inerference emissions IEC/EN , IEC/EN high-frequency radiaed IEC/CISPR 22, EN Class B high-frequency conduced IEC/CISPR 22, EN Class

13 Technical diagrams Load limi curves AC load (resisive) DC load (resisive) AC volage [V] DC volage [V] resisive load resisive load CT-D.1x AC curren [A] CT-D.1x DC curren [A] AC volage [V] DC volage [V] resisive load resisive load AC curren [A] DC curren [A] Deraing facor F Swiching cycles V resisive load cos j Swiching curren [A]

14 Wiring noes for devices wih conrol inpu A parallel load o he conrol inpu is possible L(+) Y1/B1 N(-) Dimensional drawings ,5 5 43, , , dimensions in mm CT-D devices wih 1 c/o conac or 2 n/o conacs CT-D devices wih 2 c/o conacs

15 CT-E range Timers CT-E Range Elecronic Timers

16 CT-E range Benefis and advanages Benefis Direc reading scales 1 Direc seing of he ime delay wihou any addiional calculaion provides accurae ime delay adjusmen. LEDs for saus indicaion 2 All acual operaional saes are displayed by fron-face LEDs, hus simplifying commissioning and roubleshooing. Connecion screws in M3 (Pozidrive 1) 3 Easy and fas ighening and release of he connecion screws wih pozidrive, pan- or crosshead screwdriver. Solid-sae oupu 4 Devices wih solid-sae oupu are he perfec soluion for high operaion cycles. Operaing conrols 1 LEDs for saus indicaion U - : V conrol supply volage applied R2: red LED: V oupu relay energized 2 Time range adjusmen (only mulifuncional devices) 3 Fine adjusmen of he ime delay 4 Preselecion of he iming funcion (only mulifuncional devices) AL AL

17 Descripion The CT-E range wih is excellen price/performance raio offers an ideal soluion for serial applicaions. 5 single funcion devices wih 5 differen ime ranges as well as 2 mulifuncion imers wih funcions and 8 ime ranges offer he highes possible flexibiliy for almos every applicaion. For high operaing cycles, conac-free CT-E imers wih solid-sae oupu are available. CT-MFE Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol Inpu Oupu Reference code Caalog number Weigh (1 pce) kg (lb) A B CA CB DA DB H CT-AHE ON-delay OFF-delay Impulse-ON Impulse-OFF Flasher saring wih ON Flasher saring wih OFF Pulse former A B CA DB DA H A B B 1) CA CB 1) V AC/DC 8 (0.05 s h) 1 c/o CT-MFE 1SVR550029R (0.18) s 1SVR550107R V AC/DC, V AC s s 1SVR550107R4100 1SVR550107R min 1SVR550107R c/o CT-ERE s 1SVR550100R s 1SVR550100R4100 V AC s 1SVR550100R min 1SVR550100R s 1SVR550118R V AC/DC s 1SVR550118R s 1SVR550118R s 1SVR550110R V AC s 1 c/o CT-AHE 2) 1SVR550110R s 1SVR550110R s 1SVR550111R V AC s 1SVR550111R s 1SVR550111R V AC/DC, s 1SVR550127R V AC s 1SVR550127R c/o CT-ARE s 1SVR550120R1100 V AC s 1SVR550120R s 1SVR550137R V AC/DC, V AC s 1SVR550137R s 1SVR550137R c/o CT-VWE s 1SVR550130R V AC s 1SVR550130R s 1SVR550130R V AC/DC 1SVR5508R V AC s 1 c/o CT-AWE 1SVR5500R V AC 1SVR5501R3100 1) wihou auxiliary volage, True Off-delay imer 2) wih conrol inpu 0.08 (0.18) 0.08 (0.18) 0.08 (0.18) 0.08 (0.18) 0.08 (0.18) Synonyms used expression alernaive expression(s) used expression alernaive expression(s) 1 c/o conac SPDT volage-relaed we / non-floaing 2 c/o conacs DPDT vol-free dry / floaing

18 Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol Inpu Oupu Reference code Caalog number Weigh (1 pce) kg (lb) CT-AWE CB 24 V AC/DC V AC V AC s 1SVR550148R s 1SVR550148R s 1SVR550148R s 1SVR550140R s CT-AWE 1 c/o 2) 1SVR550140R s 1SVR550140R s 1SVR550141R s 1SVR550141R s 1SVR550141R (0.18) DB FA 24 V AC/DC, V AC s 1 c/o CT-EBE 7) 1SVR55017R (0.18) V AC 1SVR55010R s 1SVR550207R V AC/DC, V AC s 1SVR550207R s CT-YDE 1SVR550207R c/o 1) s 1SVR550200R V AC s 1SVR550200R s 1SVR550200R (0.18) CT-IRE FC 24 V AC/DC, 1SVR550217R V AC 1 n/o + 1 CT-SDE s n/c 3) 8) V AC 1SVR550210R (0.18) V AC 1SVR550212R4100 A CA DA DB V AC/DC s, s CT-MKE ) 9) 1SVR550019R (0.18) A B CA CB DA DB H G FA FC DE ON-delay OFF-delay Impulse-ON Impulse-OFF Flasher saring wih ON Flasher saring wih OFF Pulse former Swiching relay Sar-dela change-over wice ON-delayed Sar-dela change-over wih impulse Pulse generaor saring wih ON or OFF A B G G V AC/DC 24 V AC/DC V AC/ DC 24 V AC/DC V AC/DC s solid-sae 1SVR550509R s CT-EKE 1SVR550509R s 1SVR550509R s 1SVR550519R s CT-AKE 1SVR550519R s 1SVR550519R2000 1SVR550228R c/o CT-IRE 4) 1SVR550221R c/o CT-IRE 5) 1SVR550238R9100 1SVR550231R (0.18) 0.08 (0.18) 0.08 (0.18) 0.08 (0.18) 1) wihou auxiliary volage 2) wih conrol inpu 3) wih fixed ransiion ime 4) / diagonally 5) / on op ) solid-sae oupu, funcions and ime range selecion via exernal jumpers 7) symeric ON & OFF imes 8) common conac 9) Funcions: ON-delay (AC/DC), Impuls-ON (AC only), Flasher saring wih OFF (AC only) Noice CT-...KE are solid-sae imers wih hyrisor oupu for 2-wire applicaions. They are conneced direcly in series wih he conrol coil of conacors or relays. Volage should no be applied wihou a load conneced, because here is no curren limiing in he uni.

19 Remarks Legend G B -Y1/B1 Conrol supply volage no applied / Oupu conac open Conrol supply volage applied / Oupu conac closed Conrol inpu wih volage-relaed riggering Terminal designaions on he device and in he diagrams The c/o conac is always designaed -1/18. The n/o conacs are designaed wih -1 and -18. Conrol supply volage is always applied o erminals -/B1. Funcion of he red LED The red LED R glows as soon as he oupu relay energizes and urns off when he oupu relay de-energizes. ON-delay (Delay on make) CT-ERE, CT-MFE Timing begins when conrol supply volage is applied. When he seleced ime delay is complee, he oupu relay energizes. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Inerruping conrol supply volage before he ime delay is complee, reses he ime delay. The oupu relay does no energize. Conrol inpu -Y1 of he CT-MFE is disabled when his funcion is seleced. B OFF-delay, wih auxiliary volage (Delay on break) CT-AHE, CT-MFE This funcion requires coninuous conrol supply volage for iming. Timing is conrolled by a conrol inpu, conneced o erminals -Y1. If he conrol conac is closed, he oupu relay energizes. If conrol inpu -Y1 is opened, he seleced ime delay sars. When he ime delay is complee, he oupu relay deenergizes. If conrol inpu -Y1 closes before he ime delay is complee, he ime delay is rese. Timing sars again when he conrol inpu re-opens. -/B red LED = adjused ime delay < - -Y red LED = adjused ime delay Minimum conrol pulse lengh: 20 ms

20 B OFF-delay, wihou auxiliary volage (rue delay on break) CT-ARE The OFF-delay funcion wihou auxiliary volage does no require conrol supply volage for iming. Applying conrol supply volage, energizes he oupu relay. If conrol supply volage is inerruped, he OFF-delay sars. When iming is complee, he oupu relay de-energizes. If conrol supply volage is re-applied, before he ime delay is complee, he ime delay is rese and he oupu relay remains energized. Conrol supply volage mus be applied for he minimum energizing ime (200 ms), for proper operaion. -/B = adjused ime delay Impulse-ON (Inerval) CT-VWE, CT-MFE The oupu relay energizes immediaely when conrol supply volage is applied and de-energizes when he seleced ime delay is complee. If conrol supply volage is inerruped before he ime delay is complee, he oupu relay de-energizes and he ime delay is rese. The conrol inpu -Y1 of he CT-MFE has o be jumpered if his iming funcion is configured. CT-VWE: -/B LED grün LED ro < CT-MFE: = adjused pulse ime - -Y LED grün LED ro = adjused pulse ime < CB Impulse-OFF, wihou auxiliary volage (True railing edge inerval) CT-AWE The Impulse-OFF funcion wihou auxiliary volage does no require conrol supply volage for iming. If conrol supply volage is inerruped, he oupu relay energizes and he OFF ime sars. When iming is complee, he oupu relay de-energizes. If conrol supply volage is re-applied, before he ime delay is complee, he ime delay is rese and he oupu relay de-energizes. Conrol supply volage mus be applied for he minimum energizing ime (200 ms), for proper operaion. CB Impulse-OFF, wih auxiliary volage (Trailing edge inerval) CT-AWE This funcion requires coninuous conrol supply volage. Opening conrol inpu -Y1, energizes he oupu relay immediaely and iming begins. When he seleced ime delay is complee, he oupu relay deenergizes. Inerruping conrol supply volage or closing conrol inpu -Y1, before he ime delay is complee, de-energizes he oupu relay and reses he ime delay red LED = adjused pulse ime - -Y red LED = adjused pulse ime

21 Flasher saring wih ON (Recycling equal imes, ON firs) CT-MFE Applying conrol supply volage, sars iming wih symmerical ON & OFF imes. The cycle sars wih an ON ime firs. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y1 of he CT-MFE has o be open when his funcion is seleced. DB Flasher saring wih OFF (Recycling equal imes, OFF firs) CT-EBE, CT-MFE Applying conrol supply volage, sars iming wih symmerical ON & OFF imes. The cycle sars wih an OFF ime firs. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y1 of he CT-MFE has o be jumpered when his funcion is seleced. - -Y LED grün LED ro CT-EBE: -/B LED grün = adjused flashing ime LED ro CT-MFE: = adjused flashing ime - -Y LED grün LED ro = adjused flashing ime H Pulse former (Single sho) CT-MFE Closing he conrol inpu conneced o erminals -Y1, wih conrol supply volage applied, energizes he oupu relay for he seleced ON ime. When he ON ime is complee, he oupu relay de-energizes. Operaing he conrol inpu swich -Y1 during he ime delay has no effec. Afer he ime delay is complee, i can be resared by closing conrol inpu -Y1. If conrol supply volage is inerruped during iming, he oupu relay de-energizes and he ON ime is rese. G Swiching relay CT-IRE The swiching relay may be used o increase he number of available conacs or o reinforce conacs, or as a coupling/decoupling inerface. Applying conrol supply volage, energizes he oupu relay. The oupu relay deenergizes if supply volage is inerruped Y red LED = adjused pulse ime

22 FA Sar-dela change-over CT-YDE Applying conrol supply volage, energizes he sar conacor (K1) and he line conacor (K2) and begins he se saring ime. When he saring ime is complee, conac -1 de-energizes he sar conacor (K1) Now, he fixed ransiion ime sars. When he ransiion ime is complee, conac -1 energizes he dela conacor (K3). -/B red LED Sar conacor Dela conacor = adjusable saring ime 2 = fixed ransiion ime of 50 ms Conrol circui diagram L1 L2 L3 -F K K K FC Sar-dela change-over CT-SDE Applying conrol supply volage, energizes he sar conacor (K1) and he line conacor (K2) and begins he se saring ime. When he saring ime is complee, conac -1 de-energizes he sar conacor (K1). Now, he fixed ransiion ime sars. When he ransiion ime is complee, conac -18 energizes he dela conacor (K3). -F W1 V1 U M M 3 ~ W2 V2 U2 -/B red LED Sar conacor Dela conacor 1 2 Power circui diagram 1 = adjusable saring ime 2 = fixed ransiion ime of 30 ms Conrol circui diagram

23 Mulifuncion imer CT-MKE Funcions and ime ranges are programmed by simply plugging in exernal wire jumpers. A ON-delay (Delay on Make) Wihou exernal connecion. Timing begins when conrol supply volage is applied o erminal and he load conneced in series wih. When he seleced ime delay is complee, he load conneced o - energizes. If conrol supply volage is inerruped, he load de-energizes and he ime delay is rese. Inerruping conrol supply volage before he ime delay is complee, reses he ime delay. The load does no energize. CA Impulse-ON (Inerval) Exernal connecion X1-X4 required. The load energizes and iming sars when conrol supply volage is applied o erminal and he load conneced in series wih. When he seleced ime delay is complee, he load de-energizes. Inerruping conrol supply volage before he ime delay is complee, de-energizes he load and reses he ime delay. DA Flasher, saring wih ON Exernal connecion X1-X4 and X2-X4 required. When conrol supply volage is applied o erminal and he load conneced in series wih, he load energizes and de-energizes wih he seleced ON & OFF imes. The ON & OFF imes are equal. The cycle sars wih an ON ime firs (load energized). If conrol supply volage is inerruped, he load de-energizes and he ime delay is rese. DB Flasher, saring wih OFF Exernal connecion X2-X4 required. When conrol supply volage is applied o erminal and he load conneced in series wih, he load energizes and deenergizes wih he seleced ON & OFF imes. The ON & OFF imes are equal. The cycle sars wih an OFF ime firs (load de-energized). If conrol supply volage is inerruped, he load de-energizes and he ime delay is rese. - Thyrisor - red LED - Thyrisor - red LED - Thyrisor - red LED - Thyrisor - red LED = adjused ime delay = adjused pulse ime = adjused flashing ime = adjused flashing ime Programming he ime ranges X 3 -X 4 jumpered: 0,1-10 s X 3 -X 4 open: s < < A ON-delay (Delay on make) CT-EKE Timing begins when conrol supply volage is applied o erminal and he load conneced in series wih AL. When he seleced ime delay is complee, he load energizes. The glows as long as he load is energized. If conrol supply volage is inerruped, he load de-energizes and he ime delay is rese. Inerruping conrol supply volage before he ime delay is complee, reses he ime delay. The load does no energize. B OFF-delay, wih auxiliary volage (Delay on break) CT-AKE The OFF-delay funcion wih auxiliary volage requires coninuous conrol supply volage a erminal and he load conneced in series wih AL, for iming. Timing is conrolled by a conrol inpu, conneced o erminals Y2-. When he conrol inpu closes, he load energizes. If he conrol inpu opens, he seleced ime delay sars (minimum conrol pulse lengh is 20 ms). The glows as long as he load is energized. When he seleced ime delay is complee, he load de-energizes. If conrol inpu Y2- closes before he ime delay is complee, he ime delay is rese and he load remains energized. Timing sars again when he conrol inpu re-opens. Inerruping conrol supply volage reses he ime delay and de-energizes he load. -AL -AL Thyrisor -AL Y1-Y2 Thyrisor -AL = adjused ime delay < = adjused ime delay Noice: CT-...KE are solid-sae imers wih hyrisor oupu for 2-wire applicaions. They are conneced direcly in series wih he conrol coil of conacors or relays. Volage should no be applied wihou a load conneced, because here is no curren limiing in he uni.

24 CT-MFE A CT-ERE B CT-AHE 1) B CT-ARE Y1 B1 Y1 B1 B1 B Supply: /DC -Y1 Conrol inpu -1/18 c/o conac - Supply: V AC or V AC -B1 Supply: 24 V AC/DC -1/18 c/o conac (+)-(-) Supply: 24 V AC/DC or V AC or V AC -Y1 Conrol inpu -1/18 c/o conac - Supply: V AC or V AC -B1 Supply: 24 V AC/DC -1/18 c/o conac CA CT-VWE CB CT-AWE CB CT-AWE 1) DB CT-EBE B1 Y1 B1 B1 B Supply: V AC or V AC -B1 Supply: 24 V AC/DC -1/18 c/o conac Device wihou aux. volage (+)-(-) Supply: 24 V AC/DC or V AC or V AC -1/18 c/o conac Device wih aux. volage - Supply: 24 V AC/DC or V AC or V AC -Y1 Conrol inpu -1/18 c/o conac - Supply: V AC or V AC -B1 Supply: 24 V AC/DC -1/18 c/o conac FAI CT-YDE FC CT-SDE FC CT-SDE G CT-IRE B1 B B B Supply: V AC or V AC -B1 Supply: 24 V AC/DC -1/18 c/o conac Device: 1SVR R Supply: V AC -B1 Supply: 24 V AC/DC -1/18 c/o conac Devices: 1SVR R4100, 1SVR R Supply: V AC or V AC -1/18 c/o conac Supply erminals diagonally posiioned - Supply: 24 V AC/DC or V AC/DC 11-12/14 c/o conac G CT-IRE CT-MKE A CT-EKE B CT-AKE X1 X2 AL AL 11 Y U AL AL X3 X4 Y2 Supply erminals on one side of he device - Supply: 24 V AC/DC or V AC/DC 11-12/14 c/o conac - Supply: /DC - Thyrisor X1-X4 Timing funcion adjusmen X2-X4 Timing funcion adjusmen X3-X4 Time range adjusmen (Deails see funcion diagrams) -AL -AL Supply: /DC Thyrisor -AL -AL Y2- Supply: Thyrisor Conrol inpu

25 CT-E (relays) CT-E (solid-sae) Inpu circui - Supply circui -, -AL /DC -, -AL Raed conrol supply volage U s V AC V AC V AC - -B1 24 V AC/DC - Raed conrol supply volage U S olerance % Raed frequency AC/DC versions DC or 50/0 Hz AC versions 50/0 Hz /DC, approx VA/W Typical curren / power consumpion V AC, V AC approx. 2.0 VA V AC approx. 3.0 VA - 24 V AC/DC approx. 1.0 VA/W - 2 ma (24-0 V AC/DC) Curren consumpion while iming - 8 ma (0-240 V AC/DC) Inpu circui - Conrol circui Kind of riggering volage-relaed riggering - Conrol inpu, Conrol funcion -Y1 sar iming exernal - Parallel load / polarized no / yes 1) - Minimum conrol pulse lengh 20 ms - Conrol volage poenial see raed conrol supply volage - Timing circui 1 of 5 ime ranges per single funcion device s / s / s / s / min 1.) s 2.) s 3.) s 4.) s 8 ime ranges 0.05 s h (CT-MFE) 5.) min.) min Time ranges - 7.) h 8.) h 2 ime ranges s (CT-MKE) - 1.) s 2.) s <50 ms Recovery ime CT-ARE: <200 ms CT-MKE: <100 ms CT-AWE, CT-SDE: <400 ms CT-AKE: <300 ms CT-YDE: <500 ms Accuracy wihin he raed conrol supply volage olerance i < 0.5 % / V Accuracy wihin he emperaure range i < 0.1 % / C CT-MFE: i <0.0 % / C - Repea accuracy (consan parameers) i < 1 % Sar-dela ransiion ime CT-YDE / CT-SDE 50 ms / 30 ms - Minimum energizing ime CT-ARE 200 ms - Oupu circui Kind of oupu -1/18 Relay, 1 c/o conac AL - Thyrisor Conac maerial AgCdO - Raed operaional volage U e VDE 0110, IEC/EN V Maximum swiching volage 250 V AC, 250 V DC AC12 (resisive) a 230 V 4 A - Raed operaional curren I e AC (inducive) a 230 V 3 A - (IEC/EN ) AC (inducive) a 230 V 4 A - DC13 (inducive) a 24 V 2 A - 1) CT-MFE: yes / no

26 AC raing (UL 508) CT-E (relays) CT-E (solid-sae) Uilizaion caegory (Conrol Circui Raing Code) B max. raed operaional volage 300 V AC - Maximum coninuous hermal curren a B300 5 A - max. making/breaking apparen power a B VA / 30 VA - Mechanical lifeime 30 x 10 swiching cycles - Elecrical lifeime a AC12, 230 V, 4 A 0.1 x 10 swiching cycles - Max. fuse raing o achieve shor-circui n/c conac 10 A fas-acing, CT-ARE: 5 A - proecion (IEC/EN ) n/o conac 10 A fas-acing, CT-ARE: 5 A - Minimum load curren - Maximum load curren - CT-MKE: 20 ma CT-EKE, CT-AKE: 10 ma CT-MKE: 0.8 A a Ta = 20 C CT-EKE, CT-AKE: 0.7 A Load curren reducion / Deraing - 10 ma/ C Maximum surge curren - CT-MKE: 20 A for 20 ms CT-EKE, CT-AKE: A Volage drop in conneced sae - 3 V a 24 V AC m / 22 nf Cable lengh beween solid-sae imer and a 42 V AC m / 10 nf conneced load a 50 Hz and a cable capaciy of a 0 V AC - 5 m /.5 nf 100 pf/m : a 110 V AC - 50 m / 5 nf a 240 V AC - 22 m / 2.2 nf General daa Duy ime 100% Dimensions (W x H x D) 22.5 x 78.5 x 78 mm (0.88 x 3.09 x 3.07 in) Weigh approx. 80 g (0.17 lb) Mouning DIN rail (IEC/EN 07) Mouning posiion any Minimum disance o oher unis horizonal / verical no / no Degree of proecion housing / erminals IP50 / IP20 Elecrical connecion fine-srand wih wire end ferrule 2 x mm2 (2 x 18-1 AWG) Wire size fine-srand wihou wire end ferrule 2 x mm2 (2 x 18-1 AWG) rigid 2 x mm2 (2 x 18-1 AWG) Sripping lengh 10 mm (0.39 in) Tighening orque Nm Environmenal daa Ambien emperaure ranges operaion / sorage C / C Damp hea IEC h cycles, 55 C, 93 % rel., 9 h Operaional reliabiliy IEC 8-2- g Mechanical resisance IEC g Isolaion daa Raed impulse wihsand volage U imp beween all isolaed circuis VDE 0110, IEC/EN 4 4 kv; 1.2/50 µs Polluion caegory VDE 0110, IEC 4, IEC III/C Overvolage caegory VDE 0110, IEC 4, IEC III/C Raed insulaion volage U i beween supply 300 V (supply up o 240 V) circui, conrol circui and oupu circui inpu circui / oupu circui 500 V (supply up o 440 V) Tes volage beween all isolaed circuis ype es 2.5 kv, 50 Hz, 1 s Sandards Produc sandard IEC , EN , DIN VDE 0435 Teil 2021 Low Volage Direcive 200/95/EC EMC Direcive 2004/108/EC Elecromagneic compaibiliy Inerference immuniy o IEC/EN elecronic discharge IEC/EN Level 3 ( kv / 8 kv) radiaed, radio-frequency elecromagneic field IEC/EN Level 3 (10 V/m) elecrical fas ransien/burs IEC/EN Level 3 (2 kv / 5 khz) surge IEC/EN Level 3 (2 kv L-L) conduced disurbances, induced by radio-frequency fields IEC/EN Level 3 (10 V) Inerference emissions IEC/EN

27 Technical diagrams Load limi curves AC load (resisive) DC load (resisive) U V U V ,1 0,2 0, I A 10 0,1 0,2 0, I A Deraing facor F for inducive AC load Conac lifeime F 1,0 0,9 0,8 0,7 0, N ,5 0,1 0,2 0,3 0,4 0,5 0, 0,7 0,8 0,9 1,0 cos ϕ I A

28 Wiring noes for single-funcion devices wih conrol conac (CT-AHE, CT-AWE wih auxiliary volage) I I U I Y1 U Y1 I Y1 I I U U Y1 Dimensional drawing 88, Dimensions in mm 22, ,5 3.09

29 CT-S Range Timers CT-S Range Elecronic imers

30 Characerisics J Diversiy: J 8 mulifuncion imers J 13 single-funcion imers J 8 swiching relays J Conrol supply volages: J Muli range: V DC, J Wide range: /DC J Single range: V AC J Innovaive connecion echnology J Double-chamber cage connecion erminals J Easy Connec Technology J Devices wih: J 1 or 2 c/o conacs Synonyms J J J J 2nd c/o conac can be seleced as insananeous conac 1) J Remoe poeniomeer connecion 1) J Conrol inpu wih vol-free or volage-relaed riggering e.g. o sar iming, pause iming J Exended operaing emperaure range down o -40 C 1) Sealable ransparen cover for proecion agains unauhorized changes of ime values Inegraed marker label Approvals / Marks (parly pending) A, C, D, E, K / a, b 1) seleced devices used expression alernaive expression(s) used expression alernaive expression(s) 1 c/o conac SPDT volage-relaed we / non-floaing 2 c/o conacs DPDT vol-free dry / floaing Benefis Easy Connec Technology 1 Tool-free wiring and excellen vibraion resisance. Push-in erminals provide connecion of wires up o 2 x 0,5-1,5 mm² (2 x 20-1 AWG), rigid or fine-srand wih or wihou wire end ferrules. Double-chamber cage connecion erminals 2 Double-chamber cage connecion erminals provide connecion of wires up o 2 x 0,5-2,5 mm² (2 x AWG) rigid or fine-srand, wih or wihou wire end ferrules. Poenial disribuion does no require addiional erminals. Snap-On housing Tool-free DIN rail insallaion and deinsallaion of he Elecronic Timer wih Snap-On housing. Time range preselecion and fine adjusmen 3 Direc assignmen of he preseleced ime range o he fine adjusmen poeniomeer scale by mulicolor scales. LEDs for saus indicaion 4 All acual operaional saes are displayed by fron-face LED s, hus simplifying commissioning and roubleshooing. Inegraed marker label 5 Inegraed marker labels allow he produc o be marked quickly and simply. No addiional marker labels are required. Sealable ransparen cover Proecion agains unauhorized changes of ime and hreshold values. Available as an accessory

31 Previous Generaion New Generaion Double-chamber cage connecion erminals Easy Connec Technology 1SVR30010R0200 CT-MFS.21 1SVR730010R0200 CT-MFS.21S 1SVR740010R0200 CT-MFS.21P 1SVR30010R3200 CT-MBS.22 1SVR730010R3200 CT-MBS.22S 1SVR740010R3200 CT-MBS.22P 1SVR30020R0200 CT-MVS.21 1SVR730020R0200 CT-MVS.21S 1SVR740020R0200 CT-MVS.21P 1SVR30020R3100 CT-MVS.12 1SVR730020R3100 CT-MVS.12S 1SVR740020R3100 CT-MVS.12P 1SVR30020R3300 CT-MVS.22 1SVR730020R3300 CT-MVS.22S 1SVR740020R3300 CT-MVS.22P 1SVR30021R2300 CT-MVS.23 1SVR730021R2300 CT-MVS.23S 1SVR740021R2300 CT-MVS.23P 1SVR30030R3300 CT-MXS.22 1SVR730030R3300 CT-MXS.22S 1SVR740030R3300 CT-MXS.22P 1SVR30040R3300 CT-WBS.22 1SVR730040R3300 CT-WBS.22S 1SVR740040R3300 CT-WBS.22P 1SVR30100R0300 CT-ERS.21 1SVR730100R0300 CT-ERS.21S 1SVR740100R0300 CT-ERS.21P 1SVR30100R3100 CT-ERS.12 1SVR730100R3100 CT-ERS.12S 1SVR740100R3100 CT-ERS.12P 1SVR30100R3300 CT-ERS.22 1SVR730100R3300 CT-ERS.22S 1SVR740100R3300 CT-ERS.22P 1SVR30110R3300 CT-AHS.22 1SVR730110R3300 CT-AHS.22S 1SVR740110R3300 CT-AHS.22P 1SVR30120R3100 CT-ARS.11 1SVR730120R3100 CT-ARS.11S 1SVR740120R3100 CT-ARS.11P 1SVR30120R3300 CT-ARS.21 1SVR730120R3300 CT-ARS.21S 1SVR740120R3300 CT-ARS.21P 1SVR30180R0300 CT-APS.21 1SVR730180R0300 CT-APS.21S 1SVR740180R0300 CT-APS.21P 1SVR30180R3100 CT-APS.12 1SVR730180R3100 CT-APS.12S 1SVR740180R3100 CT-APS.12P 1SVR30180R3300 CT-APS.22 1SVR730180R3300 CT-APS.22S 1SVR740180R3300 CT-APS.22P 1SVR30210R3300 CT-SDS.22 1SVR730210R3300 CT-SDS.22S 1SVR740210R3300 CT-SDS.22P 1SVR30211R2300 CT-SDS.23 1SVR730211R2300 CT-SDS.23S 1SVR740211R2300 CT-SDS.23P

32 CT-MVS.21P Descripion The highly sophisicaed CT-S range in ABB s new S-range housing offers wo differen ypes of connecion erminals and is ideally suied for universal use. Two differen connecion echnologies are available: Double-chamber cage connecion erminals: Easy Connec Technology: Accessories: The CT-S range offers he possibiliy of using accessories such as a remoe poeniomeer o adjus he ime delay or a sealable, ransparen cover o proec agains unauhorized changes. of ime and hreshold values. Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol inpu Oupu Reference code Caalog number Weigh (1 pce) kg (lb) A(+) B CA CB AB DA DB DE FC H G FA ED EC CE DA DB AC BC CT-MBS.22P ON-delay (accumulaive) OFF-delay wihou aux. volage Impulse-ON Impulse-OFF Symmerical ON-delay and OFF-delay Flasher saring wih ON Flasher saring wih OFF Pulse generaor saring Sar-dela change-over wih impulse Pulse former ON/OFF-funcion Sar-dela change-over wice ON-delayed wih ON or OFF Pulse generaor saring wih ON or OFF Single-pulse generaor Impulse-ON/OFF Flasher saring wih ON Flasher saring wih OFF fixed impulse wih adjusable ime delay Adjusable impulse wih fixed ime delay A B AB CA CB DE FC H A+ G A B AB CA CB DE H A+ G AB 1) CE ED A+ AC BC G A B AB CA CB DA DB FC H G V AC/DC 2) 3) 4) V DC, V AC V DC, V DC, 5) V AC/DC 2) 3) 4) V DC, 3) 4) 10 (0.05 s- 300 h) 10 (0.05 s- 300 h) 2 x 10 (0.05 s- 300 h) 10 (0.05 s- 300 h) 10 (0.05 s- 300 h) 1) Asymmerical ON- and OFF-delay 2) Exended emperaure range -40 C 3) Remoe poeniomeer connecion 4) 2nd c/o conac selecable as insananeous conac 5) 2 remoe poeniomeer connecions 2 c/o 1 c/o 2 c/o / 2 c/o 2 c/o CT-MVS.21S CT-MVS.21P CT-MVS.22S CT-MVS.22P CT-MVS.23S CT-MVS.23P CT-MVS.12S CT-MVS.12P CT-MXS.22S CT-MXS.22P CT-MFS.21S CT-MFS.21P CT-MBS.22S CT-MBS.22P 1SVR730020R0200 1SVR740020R0200 1SVR730020R3300 1SVR740020R3300 1SVR730021R2300 1SVR740021R2300 1SVR730020R3100 1SVR740020R3100 1SVR730030R3300 1SVR740030R3300 1SVR730010R0200 1SVR740010R0200 1SVR730010R3200 1SVR740010R3200 Conrol inpu wih volage-relaed riggering Conrol inpu wih vol-free riggering (0.32) 0.13 (0.300) (0.313) (0.289) (0.317) (0.293) (0.23) (0.225) (0.313) (0.289) (0.320) (0.293) (0.309) (0.284)

33 CT-S range Ordering deails Timers Time funcion Raed conrol supply volage Time ranges Conrol inpu Oupu Reference code Caalog number Weigh (1 pce) kg (lb) A(+) B CA DA DB G CE DA DB AC BC F CT-ERS.21P CT-AHS.22P CT-SDS.23P ON-delay (accumulaive) OFF-delay wihou aux. volage Impulse-ON Flasher saring wih ON Flasher saring wih OFF ON/OFF-funcion Impulse-ON/OFF Flasher saring wih ON Flasher saring wih OFF fixed impulse wih adjusable ime delay Adjusable impulse wih fixed ime delay Sar-dela change-over A CA DA DB G AC BC A B B ) B ) F7) V DC, / DC 2) V DC, V DC, / DC 2) V DC, V DC, V AC/DC 10 (0.05 s- 300 h) 10 (0.05 s- 300 h) 10 (0.05 s- 300 h) 10 (0.05 s- 300 h) 7 (0.05 s- 10 min) 2 c/o 2 c/o 1 c/o 2 c/o 1 c/o 2 c/o 1 c/o 2 c/o CT-WBS.22S CT-WBS.22P CT-ERS.21S CT-ERS.21P CT-ERS.22S CT-ERS.22P CT-ERS.12S CT-ERS.12P CT-APS.21S CT-APS.21P CT-APS.22S CT-APS.22P CT-APS.12S CT-APS.12P CT-AHS.22S CT-AHS.22P CT-ARS.11S CT-ARS.11P CT-ARS.21S CT-ARS.21P 1SVR730040R3300 1SVR740040R3300 1SVR730100R0300 1SVR740100R0300 1SVR730100R3300 1SVR740100R3300 1SVR730100R3100 1SVR740100R3100 1SVR730180R0300 1SVR740180R0300 1SVR730180R3300 1SVR740180R3300 1SVR730180R3100 1SVR740180R3100 1SVR730110R3300 1SVR740110R3300 1SVR730120R3100 1SVR740120R3100 1SVR730120R3300 1SVR740120R V AC or 110 V DC 8) CT-VBS.17 1SVR43021R V AC/DC 8) CT-VBS.18 1SVR43021R V DC, V AC 7 (0.05 s- 10 min) 2 n/o CT-SDS.22S CT-SDS.22P CT-SDS.23S CT-SDS.23P 1SVR730210R3300 1SVR740210R3300 1SVR730211R2300 1SVR740211R (0.271) 0.1 (0.254) (0.287) (0.27) (0.27) (0.249) 0.10 (0.234) (0.222) 0.14 (0.322) (0.27) (0.304) (0.280) (0.240) (0.227) 0.13 (0.300) (0.27) 0.10 (0.234) (0.220) (0.273) 0.1 (0.254) (0.271) (0.20) (0.251) (0.238) (0.20) (0.247) 1) Asymmerical ON- and OFF-delay 2) Exended emperaure range -40 C 3) Remoe poeniomeer connecion 4) 2nd c/o conac selecable as insananeously conac 5) 2 remoe poeniomeer connecions ) Wihou auxiliary volage 7) 50 ms ransiion ime 8) For DC conacor coils Conrol inpu wih volage-relaed riggering Conrol inpu wih vol-free riggering

34 Time funcion Raed conrol supply volage Time ranges Conrol inpu Oupu Reference code Caalog number Weigh (1 pce) kg (lb) G CT-IRS.35 ON/OFF-funcion G 24 V AC/DC CT-IRS.1 1SVR430220R V AC CT-IRS.14 1SVR430221R c/o 24 V AC/DC CT-IRS.2 1SVR430220R V AC CT-IRS.24 1SVR430221R V AC/DC CT-IRS.2G9) 1SVR430230R c/o V AC CT-IRS.24G 9) 1SVR430231R V AC/DC CT-IRS.3 1SVR430220R c/o V AC CT-IRS.35 1SVR430221R (0.27) 0.12 (0.278) (0.298) (0.311) (0.324) 0.0 (0.331) 0.9 (0.351) 0.11 (0.355) 9) Conacs wih gold-plaed conacs

35 Remoe poeniomeer 50 kq ±20 % - 0,2 q, degree of proecion IP MT-x50B Diameer Pack.- Weigh Maerial Reference Caalog uni 1 piece code number in mm pieces g / oz Plasic, black 22.5 MT-0B 1SFA11410R Plasic, chrome 22.5 MT-250B 1SFA11410R Meal, chrome 22.5 MT-350B 1SFA11410R CT-S ime relay Poeniomeers 30 mm adapers Z1 Z3 Z2 Noe: The connecions of he poeniomeer are no marked. 30 mm adaper for aaching he poeniomeer 22 mm in 30 mm mouning hole Maerial Reference code Caalog number Pack.- uni pieces Plasic, black K SFA1920R Meal, chrome K SFA1920R Weigh 1 piece g / oz Marker label Capion Reference code Caalog number Pack.- uni Weigh 1 piece pieces g / oz Symbol (see illusraion) SK GJD520R Scale 0-10 SK GJD520R Scale 0-30 M-100 1SFA11940R