HygroPalm HP23-A / HP23-AW-A Hand-Held Indicator User Guide

Transcription

1 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 1 f 51 Instructin Manual Dcument Type HygrPalm HP23-A / HP23-AW-A Hand-Held Indicatr ; Rtrnic AG E-M-HP23-V2_14

2 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 2 f 51 Instructin Manual Dcument Type Table f cntents 1 Overview General descriptin Cnfiguratin sftware Pwer supply Prbe inputs Measured parameters Calculated parameters Alarm Indicatin n the display Real time clck Service cnnectr User cnfigurable settings and functins Factry default settings Interactin between the HP23 and HygrClip 2 prbe functins Basic peratin Display Display mdes Difference between Prbe 1 and Prbe 2 (Delta Prbe) User defined parameter Keypad ON/OFF key HOLD functin Internal menu Frequently used settings system Date and time Select the calculated parameter fr a prbe input Select which prbe and/r parameters are shwn n the display Set input 1 r 2 fr a digital r analg prbe Practical advice fr measuring humidity Preparatin f the prduct samples fr AW measurement Additinal guidelines Using the HP23 functins Data capture Capturing data Viewing the captured data Data lgging Lgging data Viewing the recrded data Calibratr functin Cnnecting a device t the HP Reading measurement data Abut the HP23 calibratin and adjustment prcedures Calibratin against a reference envirnment Calibratin against a reference HygrClip 2 prbe r ther device Adjustment f humidity and temperature Aw Mde (HP23-AW) Enabling the Aw Mde and selecting the measurement functin Prbe usage guidelines Using the AwQuick functin Using the AwE functin Water activity measurement with HW Water activity measurement mdes ; Rtrnic AG E-M-HP23-V2_14

3 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 3 f 51 Instructin Manual Dcument Type 6.2 Mde selectin and settings Wrking with individual prbes r with a grup f prbes Measurement prcedure (AwQuick r AwE Mde) Water activity measurement reprt Signing the reprt Maintenance Replacing the battery Cnnecting the HP23 t a PC Lcatin f the service cnnectr (mini USB type) Peridic calibratin check f the HygrClip 2 prbe Cleaning r replacing the prbe dust filter Firmware updates Technical data Specificatins Dew pint accuracy Accessries Supprting dcuments Dcument releases ; Rtrnic AG E-M-HP23-V2_14

4 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 4 f 51 Instructin Manual Dcument Type Applicability: This manual is valid fr the HP23 with firmware versin 2.x, where 2.x can be 2.0, 2.1 etc. Changes t the last digit f the versin number reflect minr firmware changes that d nt affect the manner in which the instrument shuld be perated. 1 Overview The HP23 is a multifunctin hand-held indicatr with data lgging capability. The HP23 can be used in many different applicatins such as the spt check measurement f HVAC installatins and manufacturing prcesses, the measurement f seeds, pharmaceutical pwders and ther materials in bulk, the measurement f paper stacks and rlls, etc. The HP23 is als a calibratr that can be used t read and adjust ther instruments frm ROTRONIC that are based n the AirChip 3000 technlgy. Each f the tw prbe inputs can be cnfigured t accept either a digital HygrClip 2 humidity-temperature prbes (factry default) r an analg prbe measuring any signal such as barmetric pressure, air velcity, etc (user cnfiguratin). The HP23 has a real time clck t keep track f the date and time when recrding data and is pwered with either a standard 9 V alkaline battery r with a rechargeable battery. The HP23 features tw distinct perating mdes: Standard Mde: in this mde the HP23 can be used as a general purpse indicatr, as a data lgger r as a calibratr fr verifying and adjusting ther instruments frm ROTRONIC. The standard mde ffers the fllwing functinality (availability f sme f the functins depends n the HP23 mdel): Display f Measured and Calculated Values Relative humidity and temperature data measured by up t tw HygrClip 2 digital prbes Calculated humidity parameter such as dew / frst pint r ther, fr up t tw HygrClip 2 prbes Difference between the values measured by tw prbes (the prbes must be f the same type: digital r analg) Up t tw user defined calculatins such as the difference between the temperature and the dew pint measured by a prbe, the average f the temperature measured by tw prbes, etc. Any parameter measured by up t tw analg prbes (user defined) Manual Data Capture T facilitate the spt checking f humidity and temperature cnditins, the HP23 features eight data bins (nn-vlatile memry) each capable f retaining up t 250 humidity temperature values measured by a HygrClip 2 prbe (analg prbe data is nt recrded). Each recrd is stamped fr date and time. The data bins can be given a user defined name. Prbe selectin, bin selectin, data capture and data viewing are dne frm the keypad. Data Lgging The HP23 can autmatically recrd up t 10,000 humidity-temperature value pairs measured by a single HygrClip 2 prbe r up t 10,000 values measured by a single 1-channel analg prbe. Each recrd is stamped fr date and time. The calculated parameter (HygrClip 2 prbe nly) cannt be recrded. When recrding data frm tw prbes at the same time, the recrding capacity per prbe is cut in half. The HP23 features tw data lgging mde: start-stp (recrding ends when the memry is full) and lp (when the memry is full, the ldest recrd is dumped t make rm fr a new recrd) Except fr the lg file frmat, all lg settings can be selected frm the keypad. Data lgging can be started and stpped frm the keypad ; Rtrnic AG E-M-HP23-V2_14

5 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 5 f 51 Instructin Manual Dcument Type The HW4 sftware is required t dwnlad and view the recrded data Calibratr functin: The HP23 can be used as a calibratr fr all f the ROTRONIC HygrClip 2 devices (prbe, transmitter r ther) and allws t d the fllwing: Display the measurement data frm the device n the HP23. 1-pint humidity and/r temperature adjustment f the device cnnected t ne f the HP23 prbe inputs against the HygrClip 2 prbe cnnected t secnd prbe input f the HP23 (reference prbe). 1-pint r multi-pint humidity adjustment as well as a 1-pint r 2-pint temperature adjustment: against a knwn reference envirnment. Aw Mde: this specialized mde is available nly with mdel HP23-AW and is used fr measuring the water activity (Aw) f prduct samples and materials in bulk such as pwders, seeds, etc. When set t perate in the water activity mde, the HP23 autmatically displays humidity as Aw (1.000 aw = 100 %RH). The Aw Mde ffers the fllwing ptins: Accelerated water activity measurement (AwQuick): permits measuring the water activity f mst prducts in typically 5 minutes. The measurement starts simultaneusly fr bth prbe inputs and is ended autmatically. Cnventinal water activity measurement (AwE): the measurement starts simultaneusly fr bth prbe inputs. The HP23 autmatically detects full equilibrium cnditins and ends the measurement at that time. Data lgging and prbe adjustment are available in the water activity mde, but when using these functins humidity is shwn as %RH as ppsed t aw. The ther standard mde functins are nt available. The HP23 is available with a wide assrtment f HygrClip 2 humidity-temperature prbes t meet almst any requirement. The HygrClip 2 prbes feature well prven, durable sensrs. Digital signal prcessing ensures cnsistent prduct perfrmance and als facilitates the task f field maintenance with features such as ptentimeter free digital calibratin. Depending n the prbe mdel, the HP23 can measure cnditins within the range f 0 t 100 %RH and -100 t 200 C (-148 t 392 F). The temperature perating range f the HP23 electrnics is limited t C. The ability fr the user t easily update bth the HP23 and HygrClip 2 prbe firmware means that the indicatr and prbes can be kept up-t-date regarding any future functinality imprvement ; Rtrnic AG E-M-HP23-V2_14

6 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 6 f 51 Instructin Manual Dcument Type 2 General descriptin 2.1 Cnfiguratin sftware Mst f the HP23 settings can be cnfigured directly frm the keypad. Hwever, sme f the settings and access t sme f the functins requires cnnecting the HP23 t the USB prt f a PC running the HW4 sftware versin 3.0 r higher. Fr instructins see the fllwing HW4 manual: E-M-HW4v3-F Pwer supply The HP23 uses either a standard 9V alkaline battery (factry default) r a 9V rechargeable Ni-MH battery (user cnfiguratin). The rechargeable battery is charged either by cnnecting the service cnnectr t a USB prt r by plugging a battery charger (part number AC1212) t the service cnnectr. The typical charge current is 17 ma. Imprtant: the HP23 is shipped with a regular 9V battery and is factry preset with the battery charge functin turned ff. If yu plan n using a rechargeable battery, yu shuld turn n the battery charge functin (see Functin Menu Settings). Befre using a regular battery again, be sure t turn ff the battery charge functin. Trying t charge a regular battery may cause the battery t burst and may damage the instrument. With the default display refresh rate is 1 secnd the prbes are permanently pwered. T cnserve battery pwer, the display refresh rate can be set frm the HP23 keypad t ne f the fllwing: 10 sec, 1 min r 10 min. (MENU > Device Settings > DataUpdate). The autnmy f the HP23 with a fully charged battery depends n factrs such as the display backlight, the number f prbes, the display refresh rate, the functins being used, etc. As an indicatin, the typical current cnsumptin is as fllws: 6.5mA with 1 prbe and 20mA with 1 prbe + backlight. WARNING: the display refresh rate setting can affect the data lgging functin f bth the HP23 and prbe 2.3 Prbe inputs The HP23 has tw prbe inputs. Using the HW4 sftware (Device Manager), each prbe input can be cnfigured t accept ne f the fllwing: HygrClip 2 humidity-temperature digital prbe. Any input cnfigured t accept a HygrClip 2 digital prbe can als be used t read and adjust an instrument r device that is based n the AirChip 3000 technlgy (use service cable AC2001). 1-channel analg prbe (general): T be cmpatible with the HP23 the analg prbe must meet the fllwing requirements: supply vltage: max. 5 VDC, current cnsumptin: max. 10 ma, utput signal: 0 t max. 3.3 VDC. The HP23 uses a 12-bit A/D cnverter t digitize the prbe analg signal and can be cnfigured t measure practically any parameter. Analg pressure prbe: this is a special case f analg prbe and is subject t the same cmpatibility requirements. When analg pressure prbe is selected, the HP23 autmatically uses the signal frm the prbe t calculate any humidity parameter that requires barmetric pressure as an input value (example: mixing rati) ; Rtrnic AG E-M-HP23-V2_14

7 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 7 f 51 Instructin Manual Dcument Type Pin-Out Diagram 1: RXD (UART- digital prbe) 2: GND (digital and pwer) 3: V+: digital pbe: 3.3 VDC nminal, analg pbe: maximum 5.0 VDC, 10 ma 4: AGND (analg grund) 5: Nt used 6: 1-channel analg prbe signal : t 3.3 VDC 7: TXD (UART digital prbe) 2.4 Measured parameters Depending n the cnfiguratin f the prbe inputs, the HP23 can measure the fllwing: HygrClip 2 prbe: humidity and temperature. The HC2 prbes measure relative humidity with a ROTRONIC Hygrmer IN1 capacitive sensr and temperature with a Pt100 RTD. Analg prbe (general): any parameter measured by the prbe. The parameter unit must be specified with the HW4 sftware (Device Manager). Analg pressure prbe: the unit used fr barmetric pressure is set with the HW4 sftware > Device Manager > System. 2.5 Calculated parameters When a prbe input is cnfigured t accept a HygrClip 2 digital prbe, the HP23 can calculate any f the fllwing parameters based n the humidity and temperature values measured by the prbe (t select the calculated parameter, use either the keypad r the HW4 sftware > Device Manager): Dew pint (Dp) abve and belw freezing Frst pint (Fp) belw freezing and dew pint abve freezing Wet bulb temperature (Tw) Enthalpy (H) Vapr cncentratin (Dv) Specific humidity (Q) Mixing rati by weight (R) Vapr cncentratin at saturatin (Dvs) Vapr partial pressure (E) Vapr saturatin pressure (Ew) Nte: calculating sme f the abve parameters requires barmetric pressure as an input parameter. When n pressure prbe is cnnected t the HP23, a fixed barmetric pressure value can be specified using either the keypad r the ROTRONIC HW4 sftware. In additin, the HP23 can display the difference between tw prbes r up t tw user defined calculatins such as the difference between the temperature and the dew pint measured by a prbe, the average f the temperature measured by tw prbes, etc. (see Display in this manual) ; Rtrnic AG E-M-HP23-V2_14

8 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 8 f 51 Instructin Manual Dcument Type 2.6 Alarm Indicatin n the display Depending n the type f alarm, the display shws either a symbl r a text when the HP23 detects an alarm cnditin: Out-f-limits value (defined with the HW4 sftware fr each prbe input, includes measured values and calculated parameter). N cmmunicatin with the prbe. Display f fixed values when n prbe is cnnected the input. Easily identified humidity and temperature values can be specified with the HW4 sftware fr each prbe input. Bad RH sensr r majr sensr failure (pen r shrted sensr humidity and temperature) Lw battery charge 2.7 Real time clck The HP23 clck keeps track f the date and time and can be adjusted frm the keypad. Using the HW4 sftware, the clck can be synchrnized with the PC date and time. The clck des nt autmatically adjust fr daylight saving time (DST). 2.8 Service cnnectr The service cnnectr f the HP23 is a USB prt. Any standard cable equipped with a mini-usb type cnnectr at ne end can be used t cnnect the HP23 t a PC running the ROTRONIC HW4 sftware. See Maintenance fr the lcatin f the service cnnectr. The service cnnectr is used fr the fllwing: Cnfiguratin f the HP23 Dwnlading data recrded n the HP23 Access t the HygrClip 2 prbe functins Firmware updates 3 User cnfigurable settings and functins The HP23 can be used just as any cnventinal humidity and temperature indicatr. Making use f the HP23 cnfigurable settings and functins is entirely up t the user and the apprpriate settings depend n the user applicatin. We have prvided belw a shrt descriptin f the HP23 functins and als indicated the factry default settings. 3.1 Factry default settings Ntes: Cnfiguratin f the HP23 and prbe by the user and access t its functins requires a PC with the ROTRONIC HW4 sftware (versin r higher) installed. A standard USB cable with a mini-usb cnnectr at ne end is used t cnnect the HP23 service cnnectr t a USB prt f the PC. Settings and functins that can als be accessed frm the keypad are marked with the letter K (see als Operatin > Internal Menu). HP23 Cnfigurable Settings Factry default Device write prtectin Disabled RS-485 address 0 Device name Instrument mdel Fixed barmetric pressure value K hpa (29.92 In Hg r PSI) ; Rtrnic AG E-M-HP23-V2_14

9 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 9 f 51 Instructin Manual Dcument Type HP23 Cnfigurable Settings Factry default Display refresh rate K 1 sec. Battery type / Battery charge K Standard (nn rechargeable) Aut Pwer Off K OFF (disabled) Date and time K Time zne dependent system (Metric r English) K Metric, except USA: English Date and time frmat, date separatr K Eurpean frmat (except Nrth America) Input cnfiguratin HygrClip 2 digital prbe Input name Prbe 1 r Prbe 2 Psychrmetric calculatin fr the input K N calculatin Display backlight K On Key Press Displayed parameters / display mde K %RH and temperature + date and time Display reslutin K 1 decimal Trend indicatr (display) K Enabled Menu access frm keypad Enabled Delta Prbe / User Defined Parameter K Disabled Humidity / temperature calibratin K Enabled Humidity / temperature adjustment K Enabled Manual data capture K Enabled Data Lgging K Disabled Aw Mde (water activity measurement) K Disabled Device write prtectin Disabled Out-f-limit values alarm Disabled Mnitr sensr alarms Enabled (this functin cannt be disabled) Lss f cmmunicatin with prbe alarm Disabled Simulatr mde (fixed values) Disabled Fr a detailed descriptin f all HygrClip 2 prbe (AirChip 3000) functins see dcument E-T-AC3000-DF-V1 Instructins regarding the cnfiguratin f the HP23 and prbes as well as access t the functins are prvided in the fllwing manuals: E-M-HW4v3-F2-012 E-M-HW4v3-F2-001 E-M-HW4v3-Main ( 6.5) E-M-HW4v3-DR-001 E-M-HW4v3-A2-001 E-M-AC3000-CP 3.2 Interactin between the HP23 and HygrClip 2 prbe functins It is imprtant t nte that when used tgether, the HP23 indicatr and HC2 prbe (HygrClip 2) cnstitute a 2-cmpnent system. Each system cmpnent has its wn micrprcessr, firmware and functins. Sme f these functins are unique t each system cmpnent. Other functins are fund in bth cmpnents ; Rtrnic AG E-M-HP23-V2_14

10 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 10 f 51 Instructin Manual Dcument Type The functins and settings f the HP23 indicatr and HygrClip 2 prbe (HC2) perate tgether as indicated belw: Functin / Setting HP23 HC2 Ntes Device prtectin X X Individual t the HP23 and HC2 prbe RS-485 address X X Individual t the HP23 and HC2 prbe Device Name X X User defined descriptin The device name f the HC2 prbe is nt displayed by HW4 and is replaced with the HP23 Input Name Calculatin X X Psychrmetric calculatin HP23 setting verrides HC2 prbe setting Data refresh rate X Refresh interval fr the LC display. When set abve 1 s, this setting causes the HC2 prbe nt t be pwered in between display refreshes s as t cnserve battery pwer. Nte: when the HP23 is recrding data, the prbe is pwered as required by the lg interval, regardless f the display refresh interval. Simulatr functin X X Generates fixed humidity and / r temperature value When enabled, the HP23 settings verride the HC2 prbe settings system X X The HP23 setting verrides HC2 prbe setting. The HC2 prbe settings still apply when the prbe is used alne Make sure t use the same humidity symbl and the same temperature unit fr bth the HP23 and prbe. The HP23 settings are independent frm the HC2 prbe settings. Out-f-limits value alarm RH sensr test Analg utputs X X X X The HC2 prbe settings have n effect n the HP23 and ut-flimits values defined at the prbe level d nt generate a HP23 alarm. The RH sensr is nt tested when the refresh interval fr the LC display is set abve 1 sec. Parameter and scale The HC2 prbe settings have n effect n the HP ; Rtrnic AG E-M-HP23-V2_14

11 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 11 f 51 Instructin Manual Dcument Type 4 Basic peratin 4.1 Display Display mdes The LC display has a backlight which can be set t be n all the time r whenever a key is pressed. The backlight can als be disabled. Using the HP23 Menu > Device Settings > Display Settings > Mde, the display mde can be changed as shwn belw: Standard: 3-line display: Large: %RH Temperature Date and time %RH Temperature Calculated parameter N date and time Bth the parameter and prbe can be changed with the UP arrw key r the DOWN arrw key The display can als be cnfigured t shw a trend indicatr n each line: : increasing value : decreasing value In the event f an alarm the symbl [! ] appears t the right f the value. The bttm f the display shws the date and time as well as which prbe is currently selected: The battery charge is shwn with a 7-bar icn. A diskette icn appears when the prbe data is being lgged. The humidity and temperature frm prbe 1 are being recrded Battery charge indicatr ; Rtrnic AG E-M-HP23-V2_14

12 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 12 f 51 Instructin Manual Dcument Type Difference between Prbe 1 and Prbe 2 (Delta Prbe) The difference between the humidity, temperature and calculated parameter f tw prbes cnnected t the HP23 (Prbe 1 value minus Prbe 2 value) can be shwn n the display by turning n the DPbe/UCalc ptin (HP23 internal menu - accessed frm the keypad). The Delta Prbe functin is similar t a third prbe that can be selected frm the keypad with the UP key r with the DOWN key. Nte: This functin wrks nly when tw prbes are cnnected t the HP23. Delta Prbe is als nt available when the HP23 has been cnfigured with the HW4 sftware t calculate a user defined parameter (see belw) User defined parameter Using the HW4 sftware, the HP23 can be enabled t calculate up t tw user defined parameters such as the difference between the temperature and the dew pint measured by a prbe, the average f the temperature measured by tw prbes, etc. The user defined parameters can be shwn n the display by turning n the DPbe/UCalc ptin (HP23 internal menu - accessed frm the keypad). Fr additinal explanatins and instructins see the fllwing HW4 manual: E-M-HW4v3-F Keypad ON/OFF: Turns the instrument n r ff. Activates / de-activates HOLD functin MENU: Activates the internal menu. Press this key again t g back t the previus submenu r t exit the menu UP / DOWN: Changes the prbe being displayed (including delta prbe r user defined parameter, when enabled) Changes the data-bin used t capture data When the menu is active, use t navigate the menu, make a selectin r change a value ENTER: When the menu is active, use t cnfirm the selectin f a menu item, effect a change f settings and cnfirm any change In the HP23 Standard Mde, use t capture the current %RH and temperature data t ne f the 8 data bins In the HP23 AW Mde, use t start, hld r stp the water activity measurement functin ; Rtrnic AG E-M-HP23-V2_14

13 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 13 f 51 Instructin Manual Dcument Type 4.3 ON/OFF key The ON/OFF key is used as fllws: T turn the instrument n: press the ON/OFF key T turn the instrument ff: press the ON/OFF key fr mre than 1 secnd T activate the HOLD functin: press the ON/OFF key briefly (less than 1 secnd) T deactivate the HOLD functin: press the ON/OFF key briefly (less than 1 secnd) 4.4 HOLD functin When the HOLD functin is active, the wrd HOLD appears at the bttm f the LC display n the line where the date and time are nrmally displayed. The display is frzen and shws the values that were either last measured r last calculated at the time the ON/OFF key was pressed. All functins such as data lgging, data capture, prbe adjustment, etc. are als frzen. Likewise, cmmunicatin with the ROTRONIC HW4 sftware is frzen. The HP23 menu can still be used t change the display mde, but the values are nt updated. The HOLD functin is autmatically ended whenever the instrument is turned ff. The values that were displayed while the HOLD functin was active are nt memrized and are lst. The HOLD functin is nt available when the Aw Mde is enabled. Enabling the Aw Mde autmatically ends the HOLD functin. WARNING: when the HOLD functin is active, functins such as data lgging and prbe adjustment frm the keypad shuld nt be used because bth the measured and calculated values are n lnger updated. 4.5 Internal menu Nte: Unauthrized access t the menu can be prevented by disabling display menu (use the HW4 sftware > Device Manager > Display) Main Menu Menu Items Submenu Items Selectins r Infrmatin Device Inf Serial Nbr Serial number Ntes Versin Type Firmware versin Device type Name Device name User defined Battery Battery charge status Device Settings Display Settings Trend ON / OFF Trend indicatin n the display Decimals 1 r 2 Display reslutin Cntrast LC display cntrast adjustment Back Light Key Press/ON/OFF Display backlight mde Mde Standard H+T+Calc See Large DPbe/UCalc ON / OFF See / ; Rtrnic AG E-M-HP23-V2_14

14 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 14 f 51 Instructin Manual Dcument Type Main Menu Prbe 1 Nte: this sectin applies nly when input 1 is cnnected t ne f the fllwing: HygrClip 2 prbe Menu Items Submenu Items Selectins r Infrmatin Ntes Lcal Settings Date Fmt dd mm yyyy Date frmat mm dd yyyy yyyy mm dd Separatr. r / Date separatr Time Fmt 24h / 12 h Time frmat Sys Metric / English system Input 1 Pbe Type HygrClip Prbe type Analg Pressure Calc Calculatin HygrClip prbe nly U min (mv) Analg prbe vltage utput range U max (mv) Analg prbe vltage utput range Range Min Analg prbe measuring range Range Max Analg prbe measuring range Input 2 See Input 1 See Input 1 Fixed barmetric pressure Pressure value used as an input fr sme psychrmetric calculatins DataUpdate 1s/10s/1min/10 min Display refresh interval BattCharge ON / OFF Enable r disable battery charge functin AutPwerOff Date Time Inf Serial Nbr Versin Name OFF 1 min 5 min 15 min 30 min 45 min 60 min Firmware versin Humi Adjust Acquired Pints Lists the cal. pints present in the prbe memry (a max. f 10 pints are shwn) Acquire Ref The HP23 pwers itself dwn after a user specified time perid Manual date setting Manual time setting User defined (HW4) Additinal Optins: Clear all cal. pints Clear the last pint Saves value measured by prbe 2 as a cal. pint ; Rtrnic AG E-M-HP23-V2_14

15 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 15 f 51 Instructin Manual Dcument Type Main Menu Service cnnectr f a device with integral prbe (HF3, HF4, etc.) Menu Items Submenu Items Acquire Selectins r Infrmatin Manual entry: knwn reference envirnment Ntes Saves value entered manually as a cal. pint Adjust Adjusts the prbe Effect depends n number f calibratin pints in prbe memry Reset t Factry Returns the prbe t the initial factry adjustment Prbe 1 Nte: this sectin applies when input 1 is cnnected by means f cable AC2001 t the service cnnectr f a HF5 r HF8 transmitter Temp Adjust Acquired Pints Lists the cal. pints present in the prbe memry (a max. f 2 pints are shwn) Prbe Sel Applies t selected prbe cnnected t HF5 r HF8 Acquire Ref Acquire Manual entry: knwn reference envirnment Additinal Optins: Clear all cal. pints Clear the last pint Saves value measured by prbe 2 as a cal. pint Saves value entered manually as a cal. pint Adjust Adjusts the prbe Effect depends n number f calibratin pints in prbe memry Reset t Factry HF5: be sure t select prbe 1 Returns the prbe t the riginal factry adjustment HF5: ne prbe nly HF8: up t 2 prbes HF8: select prbe 1 r prbe 2 Device Inf Serial Nbr Infrmatin read frm the Versin Firmware versin HF5 r HF8 Name User defined (HW4) Prbe Inf Serial Nbr Infrmatin read frm the Versin Firmware versin selected prbe cnnected t the HF5 r HF8 Name User defined (HW4) Humi Adjust Acquired Pints Lists the cal. pints Additinal Optins: present in the prbe memry (a max. f Clear all cal. pints 10 pints are Clear the last pint shwn) Acquire Ref Acquire Manual entry: knwn reference envirnment Saves value measured by prbe 2 (HP23) as a cal. pint Saves value entered manually as a cal. pint Adjust Adjusts the prbe Effect depends n number f calibratin pints in ; Rtrnic AG E-M-HP23-V2_14

16 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 16 f 51 Instructin Manual Dcument Type Main Menu Menu Items Submenu Items Reset t Factry Selectins r Infrmatin Ntes prbe memry Returns the prbe t the initial factry adjustment Prbe 2 Temp Adjust Applies t selected prbe cnnected t HF5 r HF8 Acquired Pints Acquire Ref Acquire Lists the cal. pints present in the prbe memry (a max. f 2 pints are shwn) Manual entry: knwn reference envirnment Additinal Optins: Clear all cal. pints Clear the last pint Saves value measured by prbe 2 (HP23) as a cal. pint Saves value entered manually as a cal. pint Adjust Adjusts the prbe Effect depends n number f calibratin pints in prbe memry Reset t Factry See Prbe 1 Returns the prbe t the riginal factry adjustment Nte: this sectin applies nly when input 2 is cnnected t ne f the fllwing: HygrClip 2 prbe See Prbe 1 See Prbe 1 Input 2 is nt designed fr cnnectin t the service cnnectr f a HF5 r HF8 transmitter Service cnnectr f a device with integral prbe (HF3, HF4, etc.) Data Capture Displays the names f the 8 data bins Press n ENTER t select the highlighted data bin Shws the individual data recrds View Data Use the up and dwn keys t navigate the recrds Shws the minimum, Summary maximum and average values fr the data bin Clear Data Clears the data bin ; Rtrnic AG E-M-HP23-V2_14

17 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 17 f 51 Instructin Manual Dcument Type Main Menu Menu Items Submenu Items Selectins r Infrmatin Ntes Data Lgging Recrding (ON / OFF) Nbr f recrds Lg Interval Mde: Start Stp / Lp Start Recrding Recrding Data lgging by the HP23 Stp Recrding Samples (max. 10,000 H+T recrds) Interval Mde Settings Interval Lg interval: 5 sec t 1 h Cannt be changed while the HP23 is recrding data Mde StartStp / Lp Start Stp: the recrding stps when the memry is full Lp: when the memry is full the ldest recrd is dumped t make rm fr the new recrd Prbe 1 ON / OFF Prbe 2 ON / OFF Aw Mde Enable ON / OFF Enable = ON changes the display as fllws: Humidity unit changes t aw N calculated parameter Large display mde is disabled Mde AwQuick / AwE AwQuick: accelerated water activity measurement AwE: cnventinal water activity measurement Dwell Time minutes Dwell time (AwQuick) AwQ Temp C / minute Temperature stability definitin (AwQuick) AwE Temp C / minute Temperature stability definitin (AwE) AwE Humi aw / minute Humidity stability definitin (AwE) SaveResult ON / OFF When Aw measurement is ended, the result is saved in the fllwing data bins: Prbe 1: always t Bin 1 Prbe 2: always t Bin ; Rtrnic AG E-M-HP23-V2_14

18 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 18 f 51 Instructin Manual Dcument Type NOTE: use the MENU key t g back ne step frm any sub-menu r t exit the entire menu (this may require several key presses). 4.6 Frequently used settings system Press the MENU key and select Device Settings > Lcal Settings > Sys. Press ENTER t activate the Sys menu item, use the UP r DOWN arrw key t change the unit system. Press ENTER t cnfirm and press MENU t exit. The HW4 sftware can als be used t change the unit system Date and time Press the MENU key and select Device Settings > Date r Time. Press ENTER t activate either the Date r the Time menu item, use the UP r DOWN arrw key t change the Date r the Time. After each change, the cursr mves t the right. When dne, press ENTER t cnfirm and press MENU t exit. T change either the date r the time frmat, Press the MENU key and select Device Settings > Lcal Settings > Date Fmt r Time Fmt. Press ENTER t activate either the Date Fmt r the Time Fmt menu item, use the UP r DOWN arrw key t change the Date r the Time frmat. When dne, press ENTER t cnfirm and press MENU t exit. The HW4 sftware can als be used t set the clck f the HP23 t the PC date and time Select the calculated parameter fr a prbe input The calculated parameter is available nly when the input is set fr a digital HygrClip 2 prbe. Press the MENU key and select Device Settings > Input 1 r Input 2 > Calc. Press ENTER t activate the Calc submenu, use the UP r DOWN arrw key t select the calculated parameter. Press ENTER t cnfirm and press MENU t exit Select which prbe and/r parameters are shwn n the display Press the MENU key and select Device Settings > Display Settings > Mde. Press ENTER t activate the Mde menu item, use the UP r DOWN arrw key t select the display mde. Press ENTER t cnfirm and press MENU t exit. Depending n the display mde, use the UP r DOWN arrw key t change the prbe and/r parameter being displayed. NOTE: The calculated parameter (HygrClip 2 prbe nly) is shwn nly if enabled fr the prbe input that is selected (MENU > Input 1 r Input 2 > Calc) ; Rtrnic AG E-M-HP23-V2_14

19 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 19 f 51 Instructin Manual Dcument Type Set input 1 r 2 fr a digital r analg prbe Press the MENU key and select Device Settings > Input 1 r Input 2 > Pbe Type. Press ENTER t activate the Pbe Type menu item, use the UP r DOWN arrw key t change the prbe type. Press ENTER t cnfirm and press MENU t exit. When using an analg prbe, be sure t define bth the vltage signal range and the measuring range f the prbe. HW4 is required t define the unit f measurement f an analg prbe. The HW4 sftware can als be used t change the prbe type fr each input. 4.7 Practical advice fr measuring humidity The mst cmmn surce f errr when measuring relative humidity is a difference between the temperature f the prbe and the temperature f the envirnment. At a humidity cnditin f 50 %RH, a temperature difference f 1 C (1.8 F) typically results in an errr f 3 %RH n relative humidity. When using the HP22 hand-held indicatr, it is gd practice t mnitr the display fr temperature stability. The prbe shuld be given sufficient time t equilibrate with the envirnment t be measured. The larger the initial temperature difference between the prbe and the envirnment t be measured, the mre time temperature equilibratin requires. This time can be shrtened, and errrs avided, by using the prbe cnfiguratin that fits best fr yur applicatin. In extreme situatins, cndensatin may ccur n the sensrs when the prbe is clder than the envirnment. As lng as the humidity / temperature limits f the humidity sensr are nt exceeded, cndensatin des nt alter the calibratin f the sensr. Hwever, the sensr has t dry ut befre it can prvide a valid measurement. Nn-mving air is an excellent insulatr. When there is n air mvement, surprising differences in temperature and humidity can nted ver shrt distances. Air mvement at the prbe generally results in measurements that are bth faster and mre accurate. 4.8 Preparatin f the prduct samples fr AW measurement The HC2-AW prbe is designed fr use with the WP-40S sample hlder with remvable depth reductin insert ; Rtrnic AG E-M-HP23-V2_14

20 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 20 f 51 Instructin Manual Dcument Type The WP-40S sample hlder can be used with tw different sizes f dispsable sample cups (PS-14: shallw / PS-40: deep). Use the shallw sample cups (PS-14) tgether with the depth reductin insert. The PS-14 cups are suitable fr calibrating the prbe with the Rtrnic certified humidity standards r with saturated salt slutins. In general, use the shallw cups fr a liquid, a paste r a pwder. Use the PS-40 deep sample cups fr prducts in bulk (large chunks). The dispsable sample cups serve tw purpses: (a) Prvide a means string prduct samples prir t measurements s that they can cme t the same temperature as the prbe. (b) Prevent cntaminatin acrss samples. Prir t measurements, fill a number f dispsable sample cup with the prducts t be measured. Usually, filling up t 1/3 f the cup is sufficient. T avid siling the prbe, d nt fill the cup abve the fill line (see belw) ; Rtrnic AG E-M-HP23-V2_14

21 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 21 f 51 Instructin Manual Dcument Type Additinal guidelines a) Measure water activity nly in a temperature stable area. This is an essential requirement! D nt measure n a bench that is lcated near a heater, an AC vent r an pen windw. Avid direct expsure f the prbe and/r prduct samples t sun light (heating effect). Fr best accuracy, temperature shuld nt change by mre than 0.01 C / minute ( C / minute in the case f prduct with a water activity > 0.80 aw) b) Prir t measurements, place each prduct sample in a dispsable sample cup with the cver n. Place the cups in the same general area as the prbe. Allw fr sufficient time fr the samples t cme t the temperature f the prbe (usually rm temperature). A frequent mistake is t measure prduct samples which have been kept vernight in a refrigeratr withut first allwing them t cme t rm temperature. Anther mistake is t measure samples cming straight frm a ht manufacturing prcess. T measure water activity at a temperature ther than rm temperature, place bth the prbe and the prduct samples in an incubatr set at the desired temperature. c) Prir t using the prbe, verify the integrity and cleanliness f the sealing O-ring lcated under the prbe d) Avid warming up the prbe, the sample hlder r the prduct sample by tuching r hlding fr t lng in yur hand ; Rtrnic AG E-M-HP23-V2_14

22 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 22 f 51 Instructin Manual Dcument Type 5 Using the HP23 functins 5.1 Data capture Manual data capture is available nly in the HP23 standard perating mde. Data cannt be manually captured when the HP23 is in the AW mde. Up t 250 relative humidity and temperature recrds can be manually captured t each f the 8 data-bins. The captured data is autmatically date and time stamped. The calculated parameter cannt be captured. A descriptive name can be given t each data-bin with the HW4 sftware (labratry, warehuse, etc.) Nte: a descriptive name (labratry, warehuse, etc.) can be given t each data-bin with the HW4 sftware Capturing data Use the UP r DOWN arrw key t select the prbe Select the data-bin with the UP r DOWN arrw key Press the ENTER key t activate the Data Capture functin Data capture is cnfirmed n the HP23 display Wait a few secnds r press MENU t EXIT the Data Capture functin Viewing the captured data Press the MENU key and select Data Capture. Press ENTER t activate the Data Capture menu item. Use the UP r DOWN arrw key t select the data-bin t be viewed. Press ENTER t cnfirm and pen the data-bin sub-menu. Use the UP r DOWN arrw key t select a menu item and press ENTER t cnfirm: View Data: view individual data recrds Summary: view the maximum, minimum and average values ; Rtrnic AG E-M-HP23-V2_14

23 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 23 f 51 Instructin Manual Dcument Type Clear Data: erase the cntents f the data-bin Press MENU t exit. 5.2 Data lgging Data lgging can be started r stpped bth in the HP23 standard perating mde and in the AW mde. The HP23 can lg up t10,000 relative humidity and temperature value pairs prvided by a single HygrClip 2 prbe r up t 10,000 data values prvided by a single 1-channel analg prbe. Bth prbe inputs can be lgged at the same time and in that case the recrding capacity per prbe is cut in half. Each recrd is autmatically date and time stamped. The calculated parameter cannt be directly recrded by the HP23 but it can be added t the humidity and temperature data after dwnlading the recrded data t a PC with the HW4 sftware. See the fllwing HW4 manual: E-M-HW4v3-F Lgging data The data lgging settings apply t bth prbe inputs Data lgging starts and ends simultaneusly fr bth prbe inputs The lg data functin settings cannt be changed as lng as data lgging is active Cnfigure the data lgging functin and start recrding data: Press the MENU key and select Data Lgging. Press ENTER t activate the Data Lgging menu. Use the UP r DOWN arrw key t select Settings. Press ENTER t cnfirm and pen the Settings sub-menu. Use the UP r DOWN arrw key t select a menu item and press ENTER t cnfirm: Select Interval (lg interval). Press ENTER t activate the Interval menu item and use the UP r DOWN arrw key t change the lg interval. Press ENTER after each change t cnfirm and mve the cursr t the right. When dne, press ENTER t cnfirm and exit. Use the UP r DOWN arrw key t select the Mde menu item. Press ENTER t activate the Mde menu item and use the UP r DOWN arrw key t change the lgging mde: - Start-Stp. the recrding will stp when the memry is full - Lp: when the memry is full the ldest recrd will be dumped t make rm fr the next recrd When dne, press ENTER t cnfirm and exit. Use the UP r DOWN arrw key t select each prbe t be lgged. Press ENTER t activate the Prbe 1 r Prbe 2 menu item and use the UP r DOWN arrw key t enable data lgging. Press ENTER t cnfirm and exit. Press the MENU key and t use the UP arrw key t select Start Recrding Press the MENU key and use the UP arrw key t select Start Recrding Press the ENTER key twice t start recrding data ; Rtrnic AG E-M-HP23-V2_14

24 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 24 f 51 Instructin Manual Dcument Type The HP23 autmatically exits the data lgging functin and a diskette symbl appears at the bttm left f the display fr each prbe being recrded Stp recrding data: Press the MENU key and select Data Lgging. Press ENTER t activate the Data Lgging menu item. Use the UP r DOWN arrw key t select Stp Recrding. Press ENTER twice t cnfirm. The HP23 autmatically exits the data lgging functin Viewing the recrded data Data recrded with the HP23 data lgging functin can be viewed nly after cnnecting the HP23 t a PC with the HW4 sftware. Fr instructins see the fllwing HW4 manual: E-M-HW4v3-F Calibratr functin The HP23 can be used t d the fllwing: Read the measurement data frm a prbe, transmitter r ther device Perfrm a 1-pint r multi-pint calibratin f the prbe, transmitter r ther device (humidity and / r temperature) against a reference HygrClip 2 prbe that is als cnnected t the HP23. The calibratin pints are retained in the prbe, transmitter r ther device memry. Perfrm a 1-pint r a multi-pint calibratin f the prbe, transmitter r ther device (humidity and / r temperature) against a knwn reference envirnment. The calibratin pints are retained in the prbe, transmitter r ther device memry. Adjust the prbe, transmitter r ther device using the temperature and / r humidity calibratin pints already present in the prbe, transmitter r ther device memry ; Rtrnic AG E-M-HP23-V2_14

25 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 25 f 51 Instructin Manual Dcument Type Cnnecting a device t the HP23 The HP23 is cmpatible with all f the ROTRONIC HygrClip 2 devices (prbe, transmitter r ther). The table belw explains hw t cnnect the HP23 and the device t be read, calibrated r adjusted. Device t be read / calibrated Cnnectin t the HP23 Ntes HygrClip 2 plug-in prbe Transmitter r ther device with an integral nn remvable prbe. Examples: HF3, HF4 transmitters, etc. HygrClip 2 plug-in prbe cnnected t a device such as the HF5 (except 2-wire mdels such as HF520) r HF8 transmitter In principle, the prbe, transmitter r ther device can be cnnected t any f the tw HP23 prbe inputs. T avid cnfusin, we recmmend t systematically use prbe input 1 The transmitter (r ther device) must be cnnected t prbe input 1 f the HP23. D nt cnnect the device t input 2 Use cable AC2001 t cnnect a device with a UART interface (e.g. service cnnectr) t the HP23 The prbe, transmitter r ther device can be calibrated against a knwn reference envirnment r against a reference prbe cnnected t the ther input f the HP23 Use cable AC2001 t cnnect the service cnnectr (UART interface) f the device t the HP23 The prbe r prbes cnnected t the device can be calibrated against a knwn reference envirnment r against a reference prbe cnnected t input 2 f the HP Reading measurement data Cnnect the device t be read t the HP23 as explained under Press the MENU key and select the prbe input t which the device is cnnected (Prbe 1 r Prbe 2). Press ENTER t activate the Prbe 1 r Prbe 2 menu When the device is a HygrClip 2 prbe cnnected t a HF5 r HF8 transmitter (r similar device), select Prbe Sel frm the menu and press ENTER. Use the UP r DOWN arrw t select the prbe t be read (HF5 transmitter: be sure t select prbe 1) Press MENU tw times t exit the menu When mre than ne device is cnnected t the HP23, use the UP r DOWN arrw key t display the measurements frm prbe input 1 r prbe input 2 If s desired, measurement data can be either captured r lgged Abut the HP23 calibratin and adjustment prcedures The HP23 perfrms tw distinct and separate prcedures: 1) Acquisitin and capture f calibratin pints t the memry f a prbe r device 2) Adjustment f the prbe r device based n the calibratin pints present in the prbe r device memry ; Rtrnic AG E-M-HP23-V2_14

26 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 26 f 51 Instructin Manual Dcument Type When the purpse is just t calibrate the prbe r device, use nly prcedure 1. Up t 2 temperature calibratin pints and up t100 humidity calibratin pints can be held indefinitely in the prbe r device memry. N calibratin pint is saved within the HP23 itself. A calibratin prtcl can be printed with the HW4 sftware. Either the HW4 sftware r the HP23 can be used at any time t delete unwanted calibratin pints frm the prbe r device memry. Adjustment can be carried ut at any time after calibratin, even several days later. Adjustment is a purely electrnic prcess based n memrized data and the prbe r device des nt need t be expsed t any specific envirnment. Nte: Instructins fr using the ROTRONIC calibratin devices and humidity standards are prvided in dcument E-M-CalBasics Calibratin against a reference envirnment Cnnect the device t be calibrated t the HP23 as explained under Expse the device t a knwn envirnment and wait fr full equilibrium with the envirnment. Whenever pssible, prvide sme ventilatin. Press the MENU key and select the prbe input t which the device is cnnected ( Prbe 1 r Prbe 2 ). Press ENTER t activate the Prbe 1 r Prbe 2 menu. When the device is a HygrClip 2 prbe cnnected t a HF5 r HF8 transmitter (r similar device), select Prbe 1 and Prbe Sel frm the menu and press ENTER. Use the UP r DOWN arrw t select the prbe t be calibrated (HF5 transmitter: be sure t select prbe 1) Use the DOWN arrw key t select either Humi Adjust r Temp Adjust (this can be dne in any rder). Press ENTER t cnfirm and pen the next sub-menu. Use the DOWN arrw key t select the Acquire (Enter Ref) menu item and press ENTER t cnfirm. Humi Adjust: the HP23 displays bth the current humidity read by the device t be calibrated and the reference humidity (knwn envirnment). Press ENTER t activate the reference value menu item and use the UP r DOWN arrw key t change each digit. Press ENTER t mve the cursr t the right. When dne, press ENTER t save the value. Use the DOWN arrw key t select <Acquire>. Press ENTER t activate the Acquire functin. Press ENTER t cnfirm and save the calibratin pint t the device memry. The HP23 autmatically exits the menu. Temp Adjust: the HP23 displays bth the current temperature read by the device t be calibrated and the reference temperature (knwn envirnment). Press ENTER t activate the reference value menu item and use the UP r DOWN arrw key t change each digit. Press ENTER t mve the cursr t the right. When dne, press ENTER t save the value. Use the DOWN arrw key t select <Acquire>. Press ENTER t activate the Acquire functin. Press ENTER t cnfirm and save the calibratin pint t the device memry. The HP23 autmatically exits the menu. Nte: the prcedure can be repeated with different reference envirnments s as t accumulate several calibratin pints (temperature: maximum 2 pints, humidity: maximum 100 pints) Calibratin against a reference HygrClip 2 prbe r ther device Cnnect the device t be calibrated t the HP23 as explained under Cnnect the reference HygrClip 2 prbe t the unused prbe input f the HP23. Expse bth the device and the reference prbe t the same stable envirnment and wait fr full equilibrium with the envirnment. Whenever pssible, prvide sme ventilatin. Press the MENU key and select either Prbe 1 r Prbe 2. The reference prbe is assumed t be cnnected t the nn-selected input. Press ENTER t activate the Prbe 1 r Prbe 2 menu item. When the device is a HygrClip 2 prbe cnnected t a HF5 r HF8 transmitter (r similar device), select Prbe 1 and Prbe Sel frm the menu and press ENTER. Use the UP r DOWN arrw t select the prbe t be calibrated (HF5 transmitter: be sure t select prbe 1) ; Rtrnic AG E-M-HP23-V2_14

27 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 27 f 51 Instructin Manual Dcument Type Use the DOWN arrw key t select either Humi Adjust r Temp Adjust (this can be dne in any rder). Press ENTER t cnfirm and pen the next sub-menu. Use the DOWN arrw key t select the Acquire (Ref = Prbe) menu item and press ENTER t cnfirm. Humi Adjust: the HP23 displays bth the current humidity read by the device t be calibrated and the value prvided by the reference prbe. Press ENTER t accept the calibratin pint. Press ENTER t cnfirm and save the calibratin pint t the device memry. The HP23 autmatically exits the menu. Temp Adjust: the HP23 displays bth the current temperature read by the device t be calibrated and the value prvided by the reference prbe. Press ENTER t accept the calibratin pint. Press ENTER t cnfirm and save the calibratin pint t the device memry. The HP23 autmatically exits the menu. Nte: the prcedure can be repeated under different cnditins s as t accumulate several calibratin pints (temperature: maximum 2 pints, humidity: maximum 100 pints) Adjustment f humidity and temperature After saving calibratin pints t the memry f a prbe r device, the HP23 can be used t d a humidity and temperature adjustment f up t tw prbes, transmitters r ther devices. Humidity and temperature adjustment are tw separate prcesses. Press the MENU key and select either Prbe 1 r Prbe 2. Press ENTER t activate the Prbe 1 r Prbe 2 menu item. When the device is a HygrClip 2 prbe cnnected t a HF5 r HF8 transmitter (r similar device), select Prbe 1 and Prbe Sel frm the menu and press ENTER. Use the UP r DOWN arrw t select the prbe t be calibrated (HF5 transmitter: be sure t select prbe 1) Use the DOWN arrw key t select either Temp Adjust r Humi Adjust (we recmmend selecting Temp Adjust first). The fllwing steps are the same fr a temperature r a humidity adjustment. Press ENTER t cnfirm and pen the next sub-menu. Optinal: with the Acquired Pints menu item selected press ENTER and review the calibratin pints present in memry. This submenu allws yu t delete unwanted calibratin pints. Press MENU when dne. Use the DOWN arrw key t select the Adjust menu item and press ENTER t cnfirm. Press ENTER t activate the Adjust functin. This functin autmatically erases the calibratin pints in memry. When dne adjusting, the HP23 autmatically exits the menu. 5.4 Aw Mde (HP23-AW) This specialized mde is available nly with mdel HP23-AW and is used fr measuring the water activity (Aw) f prduct samples and materials in bulk such as pwders, seeds, etc. See technical nte E-T-AW (Measuring Water Activity) fr basic infrmatin n water activity and its applicatins. When set t perate in the Aw Mde, the HP23 autmatically displays humidity as Aw (1.000 aw = 100 %RH) and ffers the fllwing ptins: AwE measurement ptin: the HP23 waits fr the full equilibratin f the measured prduct and prbe. Fr mst prducts, this takes frm 30 t 60 minutes. The HP23 autmatically detects equilibrium cnditins (humidity and temperature) and ends the measurement at that time by freezing the display. AwQuick measurement ptin: the HP23 uses an algrithm t accelerate the water activity measurement and prvides a result in typically 5 minutes. The measurement ends autmatically and the ; Rtrnic AG E-M-HP23-V2_14

28 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 28 f 51 Instructin Manual Dcument Type display is frzen. When temperature cnditins are stable (bth at the prduct and prbe), the value measured with the AwQuick mde is generally within ± aw f the value that wuld be btained by waiting fr full equilibratin f the prduct and prbe Enabling the Aw Mde and selecting the measurement functin T set the HP23 t the water activity mde: Press the MENU key and select Aw Mde. Press ENTER t activate the Aw Mde menu. With the Enable menu item highlighted, press ENTER and use the UP r DOWN arrw key t select ON. Press ENTER t cnfirm the selectin. Use the DOWN arrw key t select the Mde menu item and press ENTER. Use the UP r DOWN arrw key t select either AwQuick r AWE. Press ENTER t cnfirm the selectin. The settings fr either the AwQuick r AWE functin can be changed after using the UP r DOWN arrw key t highlight the setting and by pressing n ENTER. Use the UP r DOWN arrw key t change each digit. Press ENTER t mve the cursr t the right. When dne, press ENTER t save the value. Press MENU twice t fully exit the menu. Water activity mde settings: Setting Applies t Ntes Dwell Time AwQuick The HP23 waits the specified amunt f time befre prcessing the humidity data with the AwQuick algrithm. Recmmended value: 3 r 4 minutes. AWQ-Temp AwQuick The HP23 cnsiders temperature t be stable when the rate f change f the temperature signal is less than the specified value. Recmmended value: 0.01 C / min AWE-Temp AwE The HP23 cnsiders temperature t be at equilibrium when the rate f change f the temperature signal is less than the specified value. Recmmended value: 0.01 C / min AWE-Humi AwE The HP23 cnsiders humidity t be at equilibrium when the rate f change f the humidity signal is less than the specified value. SaveResult AwQuick AwE Recmmended value: Aw / min When the Aw measurement is ended, the result is saved in the fllwing data bins: Prbe 1: Bin 1 Prbe 2: Bin ; Rtrnic AG E-M-HP23-V2_14

29 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 29 f 51 Instructin Manual Dcument Type Prbe usage guidelines 1) HC2-AW prbe: check that the red LED n tp f the prbe is lit. This indicates that the prbe is being pwered. If necessary, pwer the prbe by pressing nce n the red buttn lcated n tp f the prbe. When the red LED is nt lit, the HC2-AW prbe is nt pwered and the instrument is nt receiving a signal frm the prbe. 2) Measuring with nly ne prbe at a time: bth the AwQuick and AwE functins run simultaneusly fr bth HP23 prbe inputs. We strngly recmmend t either discnnect r t pwer dwn any unused prbe. IMPORTANT: The measurement starts simultaneusly fr bth prbe inputs (discnnect r pwer ff any unused prbe) Usually, the measurement ends at a different time fr each prbe Each prbe can be displayed by using the UP r the DOWN key D nt press n ENTER until the measurement has ended fr bth prbes Using the AwQuick functin The HP23 uses an algrithm t prject the full equilibrium value (water activity) f the prduct sample: 1) The value f the humidity signal is cnstantly mnitred 2) The stability f the temperature signal is cnstantly mnitred 3) After an initial perid f time (dwell time), the humidity data is used t prject the end value f the equilibratin prcess (water activity). The measurement ends autmatically as sn as the prjected Aw value is stable. At that time, the HP23 freezes the display. The measurement is autmatically ended and typically requires abut 5 t 6 minutes. With the default dwell time f 4 minutes, the difference between the AwQuick functin and the cnventinal measurement methd is typically aw r less. The value f the dwell time can be set by the user (see SETTINGS) and is a tradeff between speed f measurement and accuracy. Generally, a lnger dwell time prduces mre accurate results but causes measurements t take lnger. The value f temperature shwn at the end f the measurement is the average temperature during the measurement. The HP23 displays a trend indicatr t the left f the temperature value. This is used t verify that temperature was stable during the measurement ; Rtrnic AG E-M-HP23-V2_14

30 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 30 f 51 Instructin Manual Dcument Type 1. AWQ Reset: the HP23 is ready t start measuring all cnnected prbes When ready t measure, press n the ENTER key. 2. AWQ Dwell: the measurement is in the dwell phase Current humidity value Current temperature value Elapsed time hh:mm:ss AwQuick mde is in the dwell phase Prbe 1 is being displayed ; Rtrnic AG E-M-HP23-V2_14

31 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 31 f 51 Instructin Manual Dcument Type 3. AWQ Running: at the end f the dwell phase the HP23 starts prjecting the end result Current Aw prjectin Average temperature 4. AWQ Ended: when the prjectin is stable fr a prbe being displayed, the HP23 autmatically ends the measurement and freezes the display fr that prbe. A check mark appears t the left f the water activity value. In additin the HP23 can be set with the HW4 sftware t emit an acustic signal (Beep) lasting 5 secnds. The acustic signal can be stpped by pushing a key (d nt press the ENTER key). When tw prbes are cnnected t the HP23, use the UP r DOWN key t verify the status f each prbe. IMPORTANT: d nt press the ENTER key until the measurement is ended fr bth prbes. Final Aw prjectin Measurement ended ; Rtrnic AG E-M-HP23-V2_14

32 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 32 f 51 Instructin Manual Dcument Type 5. AWQ Reset: write dwn the measurement fr each prbe r use the autmatic data capture functin. This functin can be enabled frm the keypad: MENU > Aw Mde > SaveResult > ON. The Aw value measured by prbe 1 is saved t Data Bin 1. Prbe 2 is saved t Data Bin 2 (see 5.1 Data Capture). Press ENTER. The HP23 is ready t start a new measurement Using the AwE functin The HP23 mnitrs the water activity and temperature values measured by the prbe. When bth values are at equilibrium during a few minutes, the measurement is autmatically ended. Depending bth n the prduct being measured and n the stability f temperature, measurements typically require 30 t 60 minutes. 1. AWE Reset: the HP23 is ready t start a measurement using ne r tw prbes When ready t measure, press n the ENTER key ; Rtrnic AG E-M-HP23-V2_14

33 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 33 f 51 Instructin Manual Dcument Type 2. AWE Running: the HP23 starts mnitring the humidity and temperature signals fr equilibrium Current humidity value Current temperature value Elapsed time hh:mm:ss AwE mde is running Prbe 1 is being displayed 3. AWE Ended: when bth the humidity and temperature signals measured by a prbe are stable, the HP23 autmatically ends the measurement and freezes the display fr that prbe. A check mark appears t the left f the water activity value. In additin the HP23 can be set with the HW4 sftware t emit an acustic signal (Beep) every 5 secnds. The acustic signal can be stpped by pushing a key (d nt press the ENTER key). When tw prbes are cnnected t the HP23, use the UP r DOWN key t verify the status f each prbe. IMPORTANT: d nt press the ENTER key until the measurement is ended fr bth prbes. Final Aw measurement Measurement ended ; Rtrnic AG E-M-HP23-V2_14

34 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 34 f 51 Instructin Manual Dcument Type 4. AWE Reset: write dwn the measurement fr each prbe r use the autmatic data capture functin. This functin can be enabled frm the keypad: MENU > Aw Mde > SaveResult > ON. The Aw value measured by prbe 1 is saved t Data Bin 1. Prbe 2 is saved t Data Bin 2 (see 5.1 Data Capture). Press ENTER. The HP23 is ready t start a new measurement ; Rtrnic AG E-M-HP23-V2_14

35 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 35 f 51 Instructin Manual Dcument Type 6 Water activity measurement with HW4 6.1 Water activity measurement mdes The AwE / AwQuick tab is available nly with HW4 Prfessinal with AwQuick. HW4 features tw mdes fr measuring water activity and the name f the tab depends n which mde has been selected. AwE mde In this mde HW4 mnitrs the stability f bth temperature and humidity. The measurement is autmatically ended as sn as bth humidity and temperature reach equilibrium. The natural (r static) equilibratin f mst prducts typically requires frm 45 t 60 minutes and can take as lng as a cuple f hurs. AwQuick mde: In the AwQuick mde, HW4 uses an algrithm t prject the full equilibrium value (water activity) f the measured prduct. The measurement is autmatically ended and typically requires abut 5 minutes. HW4 perfrms the fllwing tasks: 1) The value f the humidity signal is cnstantly mnitred 2) The stability f the temperature signal is cnstantly mnitred 3) After an initial perid f time (dwell time), HW4 uses the humidity data t prject the end value f the equilibratin prcess (water activity). The measurement ends autmatically as sn as the prjected Aw value is stable. With the dwell time set t 4 minutes, measurements typically require abut 5 minutes. When temperature cnditins are stable (bth at the prduct and prbe), the measurement btained with the AwQuick mde is generally within ± aw f the measurement that wuld be btained by waiting fr full equilibratin (AwE mde) ; Rtrnic AG E-M-HP23-V2_14

36 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 36 f 51 Instructin Manual Dcument Type 6.2 Mde selectin and settings T select the mde and t enter r mdify the settings t be used in each mde, select Settings and Tls in the HW4 main menu bar. Under Settings and Tls select HW4 Glbal Settings and select the AwQuick Mde / AwE Mde tab (the name f this tab changes depending n the mde that is currently selected). Nte: the values shwn abve are the mst frequently used. IMPORTANT: Bth the selected mde and its settings apply glbally t all instruments and prbes. T select the mde and t enter r mdify the settings t be used in each mde, click n the Settings buttn lcated n the AwE / AwQuick tab ; Rtrnic AG E-M-HP23-V2_14

37 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 37 f 51 Instructin Manual Dcument Type 6.3 Wrking with individual prbes r with a grup f prbes Wrking with individual prbes Prbes just discvered by HW4 (HW4 Main Menu Bar > Devices and Grups > Search fr Master Devices > USB Masters) are shwn individually in the Device Tree. At any time nly ne prbe can be selected in the Device Tree. After selecting a prbe, the user can start measuring water activity with that prbe. HW4 can run several water activity measurements cncurrently. Select any prbe and start measuring water activity with that prbe. Select anther prbe and start measuring water activity with that ther prbe. The water activity measurement prcess (AwQuick r AwE mde) runs independently fr each prbe. When measuring water activity with several individual prbes simultaneusly, it is incumbent t the user t change frm time t time the prbe selected in the Device Tree s as t find ut when the measurement is ended. Nte: the bttm f the frm has 3 text fields labeled Batch Number, Prduct Name and Cmments. The cntents f these fields will appear n the water activity measurement reprt, assuming that the user decides t generate such a reprt. T custmize the cntents f these fields fr each prbe, wait until ne f the prbes is dne and enter a text in each field just befre clicking n the Generate reprt buttn. Select anther prbe and prceed in the same manner. Wrking with a grup f prbes Prbes that have been discvered by HW4 can be put int a grup created by the user as illustrated belw: Wrking with a grup f prbes ffers the cnvenience f mnitring all prbes at the same time. Hwever, the cntents text fields labeled Batch Number, Prduct Name and Cmments are shared by all prbes within the grup and cannt be custmized fr each individual prbe ; Rtrnic AG E-M-HP23-V2_14

38 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 38 f 51 Instructin Manual Dcument Type 6.4 Measurement prcedure (AwQuick r AwE Mde) 1) Select an individual prbe r a grup f prbes in the Device Tree (left pane f the HW4 main screen) 2) In the right pane f the HW4 main screen, select the AwE / AwQuick tab (the label f this tab changes depending n which mde is currently selected in the HW4 Glbal Settings). Nte that the right pane is slightly different depending n whether an individual prbe r a grup f prbe has been selected in the Device Tree. 3) Select the prbe r prbes t be used fr the measurement by clicking n the bx lcated t the left f the prbe (a check mark appears when the prbe is selected). 4) T start the measurement, click n the Start buttn lcated at the bttm f the frm. A small blue symbl appears t the left f the prbe t indicate that the measurement is in prgress. After a while trend indicatrs als appear next t the water activity and temperature readings ; Rtrnic AG E-M-HP23-V2_14

39 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 39 f 51 Instructin Manual Dcument Type 5) When HW4 detects equilibrium cnditin, the measurement ends autmatically and the symbl t the left f the prbe changes t green. The result appears in the Water Activity clumn. 6) Optinal: at this time yu may want t enter a Batch Number, a Prduct Name and Cmments in the fields lcated at the bttm f the frm. This infrmatin will appear in the water activity measurement reprt shuld yu chse t generate such a reprt. 7) Optinal: click n the buttn labeled Generate reprt t generate a water activity reprt. 8) The prcess is ended by clicking n the Stp buttn lcated at the bttm f the frm. At this time a new measurement can be started ; Rtrnic AG E-M-HP23-V2_14

40 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 40 f 51 Instructin Manual Dcument Type 6.5 Water activity measurement reprt NOTE: Generate and save Prtcls must be enabled in HW4 Glbal Settings > Events tab Prir t clicking n the Stp buttn, click n the Generate reprt buttn t generate a measurement reprt. HW4 pens a dialg bx that allws the user t specify a file name and a lcatin. The reprt is saved as a text file (extensin txt) ; Rtrnic AG E-M-HP23-V2_14

41 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 41 f 51 Instructin Manual Dcument Type Use the reprt menu bar t sign and / r print the reprt. 6.6 Signing the reprt Select Sign dcument frm the file menu t add yur HW4 user name and a cmment text t the reprt. Fr authenticatin purpses yu will need t enter yur passwrd ; Rtrnic AG E-M-HP23-V2_14

42 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 42 f 51 Instructin Manual Dcument Type A new sectin is inserted at the bttm f the reprt: ; Rtrnic AG E-M-HP23-V2_14

43 Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 43 f 51 Instructin Manual Dcument Type 7 Maintenance 7.1 Replacing the battery T replace the battery, turn the latching buttn cunter-clckwise and pull ut the battery hlder. 7.2 Cnnecting the HP23 t a PC Any USB cable (mini-usb cnnectr at ne end) can be used t cnnect the HP23 t a USB prt f a PC running the ROTRONIC HW4 sftware. Prir t cnnecting the HP23, the ROTRONIC USB driver must be installed n the PC. Bth the driver and the installatin instructins (dcument E-M-HW4v3-Main) are lcated n the HW4 CD. 7.3 Lcatin f the service cnnectr (mini USB type) The service cnnectr is a USB prt and can be accessed withut pening the enclsure after remving the prtective red rund cver ; Rtrnic AG E-M-HP23-V2_14