VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

Transcription

1 V-7000 Series Selection Guide Schneider Electric V-7000 Series 1/2 to 2 Globe Vlves with Schneider Electric NSR Fort M400 (V), M800 (V), nd M1500 (V) Series ctutors pplictions Schneider Electric NSR Fort M400-V, M800-V, nd M1500-V Screw Mount series liner ctutors mount directly onto 1/2 to 2 V-7xxx series two-wy nd three-wy globe vlve bodies. Schneider Electric NSR Fort M400, M800 nd M1500 U-olt series liner ctutors mount to vlve with dditionl linkge. pplictions include chilled or hot wter nd stem. Field selectble input signls include reverse nd direct cting, floting or proportionl 0-10 Vdc, 2-10 Vdc, or 4-20 mdc, nd proportionl sequencing input signl rnges 1. pplicble Literture Schneider Electric Fort M400 (V) Series, M800 (V) Series, nd M1500 (V) Series Instlltion Instructions, (F-27599) V-821 Instlltion Instructions (U-olt style only), F Schneider Electric Vlves tlog, F ontrol Vlve Sizing, F Selection Guide ontents pplictions...pge 1 Vlve nd ctutor Selection Procedure...pge 2 Schneider Electric V-72xx Series Two-Wy Vlve odies...pge 3 Schneider Electric V-73xx Series Three-Wy Vlve odies.pge 4 Schneider Electric NSR Fort ctutor Model hrt...pge 5 mbient Temperture Restrictions...pge 5 Vlve/ctutor lose-off Pressures...pge 5 Fctory Vlve nd ctutor ssemblies...pge 6 NSR Fort ctutor Dimensions...pge 7 Two-Wy Vlve/ctutor ssembly Dimensions...pge 8 Three-Wy Vlve/ctutor ssembly Dimensions...pge Vdc, 5-10 Vdc, 2-6 Vdc, nd 6-10 Vdc lso vilble Printed in U.S opyright 2011 Schneider Electric ll Rights Reserved. F

2 Vlve nd ctutor Selection Procedure 1. Determine the required flow coefficient (v/kvs). Using the required flow nd pressure drop for the ppliction (consult 28, F if necessry), determine the required flow coefficient. 2. Determine vlve body prt number. Select two-wy vlve body from Tble-1 or three-wy mixing or diverting vlve body from Tble-2 hving the required flow coefficient, size, body pttern, end connection, nd temperture/pressure rtings pproprite for the ppliction. 3. Select the Fort ctutor Using the required close-off pressure for the ppliction, consult Tble-5 nd select Fort ctutor hving sufficient close-off pressure on the vlve body selected in Step 2. dditionl Fort ctutor specifictions my be found in Tble-3 or in the Fort Instlltion Instructions sheets shown in pplicble Literture. 4. Determine ssembly Prt Number If complete vlve nd ctutor ssembly is required, consult Tble-3 for the ctutor code of the Fort ctutor selected in Step 3. For the complete ssembly prt number: hnge the vlve body prt number prefix from V to VU. Insert the ctutor code in the third field of the prt number. onfirm the vilbility of the fctory ssembly by consulting Tble-6 (two-wy vlves), Tble-7 (three-wy mixing vlves), or Tble-8 (three-wy diverting vlves). Exmple: Vlve body: V ctutor: M400-V (ctutor code 674 from tble 3) omplete ssembly: VU Fort ctutors re field configured for the desired control signl type nd rnge plus the desired ction. onsult the pproprite Fort Instlltion Instructions for further informtion (see pplicble Literture, F-27599). 2 opyright 2011 Schneider Electric ll Rights Reserved. F

3 Vlve ody nd ctutor Selection Tble-1 Schneider Electric V-72xx Series Two-Wy Vlve odies Two-Wy Vlves Stem Up Open or Stem Up losed 1/2 to 1/1/4 Union ngle nd strightwy 5/8 OD SE Flred 1/2 to 2 Union Swet 1/2 to 2 NPT or Rp Threded Union ngle Union Strightwy ppliction: hilled or Hot Wter SE Flred Union Swet NPT Threded Rp Threded ppliction: Hot Wter or Stem NPT Threded 1/2 to 1-1/4 1/2 to 1-1/4 5/8 OD 1/2 to 2 1/2 to 2 15 to 50 mm 1/2 to 2 Vlve ody Prt Number, Stem Up Open V P V P V P V P V P V P V P V P Vlve ody Prt Number, Stem Up losed V P V P V P V P V P V P V P Flow Type Equl % Modified Liner ody ronze ronze Set ronze Stinless Steel Mteril Stem Stinless Steel Stinless Steel Plug rss Stinless Steel Pcking Spring Loded TFE/EPDM Spring Loded TFE Disc EPDM Teflon None Pressure lss NSI 250 Up to 400 F (204 ) below 150 F (65 ) ISO PN16 Mximum Inlet Pressure, Stem 35 PSIG (241 kp) 100 PSIG (690 kp) 150 PSIG (1034 kp) llowble ontrol Medi Temperture 20 F to 281 F (-7 to 138 ) 20 to 340 F (-7 to 171 ) 20 to 400 F (-7 to 205 llowble Differentil Pressure, Wter b 35 PSI (241 kp) for Norml Life 35 PSIG (241 kp) 35 PSIG (241 kp) llowble Differentil Pressure, Stem b 20 PSI (138 kp) 35 PSI (241 kp) 50 PSI (345 kp) To Select Port ode (P) P ode Vlve v (kvs) Rting (0.34) 0.4 (0.34) 0.4 (0.34) 0.4 (0.34) 0.4 (0.34) 0.4 (0.34) 0.4 (0.34) 02 1/2 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 03 (15 mm) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) (4.3) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) (4.7) 5.5 (4.7) 5.5 (4.7) 5.5 (4.7) 5.5 (4.7) 5.5 (4.7) 3/4 (20 mm) (7.4) 7.5 (6.5) 7.5 (6.5) 7.5 (6.5) 7.5 (6.5) 7.5 (6.5) (12) 10 (8.6) 10 (8.6) 10 (8.6) 10 (8.6) 10 (8.6) 1 (25 mm) (14) 14 (12) 14 (12) 14 (12) 12 (10.4) 12 (10.4) /4 (32 mm) 22 (19) 20 (17.3) 20 (17.3) 20 (17.3) 20 (17.3) 20 (17.3) /2 (40 mm) 28 (21.2) 28 (21.2) 28 (21.2) 28 (21.2) 11 2 (50 mm) 40 (34.6) 40 (34.6) 40 (34.6) 40 (34.6) 15 to 50 mm vlves with metric thred Rp 1/2 to Rp 2 b Mximum recommended differentil in full open position. Do not exceed recommended differentil pressure (pressure drop) or integrity of prts my be ffected. F opyright 2011 Schneider Electric ll Rights Reserved. 3

4 Tble-2 Schneider Electric V-73xx Series Three-Wy Vlve odies Three-Wy Vlves ppliction: hilled or Hot Wter Mixing or Diverting 5/8 OD SE Flred 1/2 to 2 NPT or Rp Threded 1/2 to 2 Union Swet SE Flred NPT Threded Rp Threded Union Swet NPT Threded 5/8 OD 1/2 to 2 15 to 50 mm 1/2 to 2 1/2 to 2 Vlve ody Prt Number, Mixing V P V P V P b V P Vlve ody, Prt Number Diverting c V P Flow Type Equl % Mteril ody Set Stem Plug Pcking Disc ronze ronze Stinless Steel rss Spring Loded TFE/EPDM None Pressure lss NSI 250 Up to 400 F (204 ) below 150 F (65 ) ISO PN16 llowble ontrol Medi Temperture llowble Differentil Pressure, Wter d 20 F to 281 F (-7 to 138 ) 20 F to 300 F (-7 to 149 ) 35 PSI (241 kp) for Norml Life To Select Port ode (P) P ode Vlve v (kvs) Rting 02 1/2 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 04 (15 mm) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) (6.5) 7.5 (6.5) 7.5 (6.5) 1 (25 mm (12) 14 (12) 15 (13) /4 (32 mm) 20 (17.3) 20 ( (17.3) /2 (40 mm) 28 (21.2) 28 (21.2) 28 (21.2) 11 2 (50 mm) 41 (36) 41 (36) 40 (34.6) On V-7313 nd V-7315 mixing vlves, port is the common port (locted on the side) nd ports nd re inlets. Flow is from to when the vlve stem is in up position (port closed). Flow is from to when vlve stem is in down position (port closed). b 15 to 50 mm vlves with metric thred Rp 1/2 to Rp 2 c On V-7323 diverting vlves, inlet port is the common port (locted on the bottom) nd ports nd re outlets. When the vlve stem is in the up position, flow is from to (port closed). When the vlve stem is in the down position, flow is from port to (port closed). d Mximum recommended differentil in full open position. Do not exceed recommended differentil pressure (pressure drop) or integrity of prts my be ffected. 4 opyright 2011 Schneider Electric ll Rights Reserved. F

5 Tble-3 Schneider Electric NSR Fort ctutor Model hrt Model ctutor ode Linkge Kit Force, lbf (N) Power Running V Trnsformer Sizing V Floting ontrol Proportionl ontrol Feedbck (2) SPDT uxiliry Switches M400 c b V-821 c M400-V 674 M400-S2 c b V-821 c M400-S2-V b 90 (400) 6 30 e No 24 Vc 4 res M800 c b V-821 c No M800-V Vdc, Vc ±10% 2-10 Vdc, (800) 50/60 Hz, or M800-S2 c b V-821 c Yes 2-10 Vdc or 4-20 mdc 24 Vc M800-S2-V b 20 to 29 Vdc with 500 ohm resistor 4 res M1500 cd b V-821 c M1500-V d (1500) e M1500-S2 cd b V-821 c 24 Vc 4 res No M1500-S2-V d b 24 Vc 4 res DIP switch selectble. b No ctutor code. No fctory ssemblies offered. c V-821 linkge (order seprtely) required for mounting ctutors to V-7xxx globe vlve bodies using U-olt style Fort. d Do not use M1500 ctutors on V-7323 three wy diverting vlves. e M400/800 D Power 20W, M1500 Dc Power 30W. Tble-4 Restrictions on mbient Temperture for Fort Vlve ctutors Fluid Temperture in Vlve ody hilled Wter Mximum llowble mbient Temperture 122 F (50 ) 281 F (138 ) 113 F (45 ) Note: When instlling vlve nd ctutor ssemblies, observe the minimum nd mximum fluid nd mbient temperture limits shown in Tble-1, Tble-2, nd Tble F (149 ) 107 F (42 ) 340 F (171 ) 100 F (38 ) 366 F (186 ) 90 F (32 ) Minimum llowble mbient operting temperture 14 F (-10 ) F opyright 2011 Schneider Electric ll Rights Reserved. 5

6 Tble-5 Select Vlve/ctutor ombintion Hving Sufficient lose-off for ppliction Vlve ody lose-off Rtings, psi (kp) Two-Wy Vlves P ode M400- (V) M800- (V) M1500- (V) V P V P V P V P V P V P V P V P V P V P V P V P V P V P V P -01, -02, -03, -04 1/2 (15 mm) 250 (1712) 250 (1712) -05, -06 3/4 (20 mm) 198 (1356) 250 (1712) -07, (25 mm) 92 (630) ) /4 (32 mm) 56 (384) 130 (890) /2 (40 mm) 37 (253) 88 (603) 177 (1212) (50 mm) 19 (130) 48 (329) 98 (671) Three-Wy Vlves P ode M400 (V) M800 (V) M1500 (V) -02, -04 1/2 (15 mm) 250 (1712) 250 (1712) -06 3/4 (20 mm) 198 (1356) 250 (1712) V P V P V P V P (25 mm) 92 (630) ) /4 (32 mm 56 (384) 130 (890) /2 (40 mm) 37 (253) 88 (603) (50 mm) 19 (130) 48 (329) V P -04, -06, -08, -09, -10, -11 1/2 to (1712) Do Not Use Do not use M1500 on V-7323 three-wy vlves. 6 opyright 2011 Schneider Electric ll Rights Reserved. F

7 Fctory ssemblies Tble-6 Fctory Vlve nd ctutor ssemblies Two-Wy Vlves ctutor Model (ctutor ode b ) Vlve ssembly Prt Number b P ode b M400-V (674) M800-V (680) M1500-V (686) -01, -02, -03, -04 1/2 X X -05, -06 3/4 X X VU-7213-xxx-4-P VU-7253-xxx-4-P VU-7273-xxx-4-P -07, X X /4 X X /2 X X X 11 2 X X X b See Tble-5 for close-off pressures Insert ctutor ode in third field of ssembly prt number. Insert P ode in lst field of ssembly prt number. Tble-7 Fctory Vlve nd ctutor ssemblies Three-Wy Mixing Vlves ctutor Model (ctutor ode b ) Vlve ssembly Prt Number b P ode b M400-V (674) M800-V (680) -02, -04 1/2 X X -06 3/4 X X VU-7313-xxx-4-P X X /4 X X /2 X X 11 2 X X b See Tble-5 for close-off pressures Insert ctutor ode in third field of ssembly prt number. Insert P ode in lst field of ssembly prt number. Tble-8 Fctory Vlve nd ctutor ssemblies Diverting Vlves ctutor Model (ctutor ode ) Vlve ssembly Prt Number b P ode b M400-V (674) M800-V (680) -04 1/2 X X -06 3/4 X X VU P X X /4 X X /2 X X 11 2 X X b See Tble-5 for close-off pressures Insert P ode in lst field of ssembly prt number. F opyright 2011 Schneider Electric ll Rights Reserved. 7

8 Dimensions (82 mm) 4.60 (117 mm) 9.53 (242 mm) 6.31 (173 mm) 3 (78 mm) 6.38 (132 mm) D M400, M800, nd M1500 U-olt Style M400-V, M800-V, nd M1500-V Screw Mount Style See Tbles 9 nd 10 Figure-1 Fort ctutor Dimensions V P Union ngle V P NPT Threded V P Rp Threded V P NPT Threded V P NPT Threded V P SE Flred V P Union Strightwy V P Union Swet V P NPT Threded V P Rp Threded V P NPT Threded V P NPT Threded V P 5/8 OD SE Flred V P Union Strightwy V P Union Swet See Tbles 9 nd 10 Figure-2 Two Wy V-7xxx Vlve ody Dimensions 8 opyright 2011 Schneider Electric ll Rights Reserved. F

9 Tble-9 Dimensions Two-Wy Vlves (see Figure-1 nd Figure-2) Dimensions in Inches (mm) Vlve ody Prt Number U-olt Style -D Screw Mount Style -D 1/2 3-1/8 (79) 1-5/8 (41) 3/4 (19) 10-9/32 (261) 7-13/32 (188) V P 3/4 3-5/8 (92) 1-11/16 (43) 15/16 (24) 10-15/32 (266) 7-19/32 (193) 1 4-1/16 (103) 1-15/16 (49) 1-1/4 (32) 10-25/32 (274) 7-29/32 (201) 1-1/4 4-5/16 (110) 2-3/16 (56) 1-11/16 (43) 11-7/32 (285) 8-11/32 (212) 1/2 ' 4-3/16 (106) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P 3/4 4-15/16 (125) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 1 6 (152) 1-1/8 (29) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4 6-1/4 (159) 1-3/8 (35) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) V P 5/8 O.D. 4 (102) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 1/2 (15 mm) 3 (76) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 3/4 (20 mm) 3-5/8 (92) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P V P V P V P 1 (25 mm) 4-5/8 (117) 1-1/8 (29) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4 (32 mm) 4-5/8 (117) 1-3/8 (35) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) 1-1/2 (40 mm) 5-3/8 (137) 1-1/2 (38) 1-7/8 (48) 11-13/32 (290) 8-17/32 (217) 2 (50 mm) 6-1/8 (156) 1-9/16 (40) 2-1/854) 11-21/32 (296) 8-25/32 (223) 1/2 4-3/16 (106) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 3/4 5-7/16 (138) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P 1 6-5/8 (168) 1-1/8 (29) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4 6-13/16 (173) 1-3/8 (35) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) 1-1/2 8-5/16 (211) 1-1/2 (38) 1-7/8 (48) 11-13/32 (290) 8-17/32 (217) 2 9-3/16 (233) 1-9/16 (40) 2-1/854) 11-21/32 (296) 8-25/32 (223) 1/2 4-3/16 (106) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P 3/4" 4-15/16 (125) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 1" 6 (152) 1-3/4 (45) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4" 6-1/4 (159) 1-3/4 (45) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) V P 5/8 OD 4 (102) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 1/2 (15 mm) 3-1/16 (78) 1-3/16 (30) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 3/4 (20 mm) 3-5/8 (92) 1-3/16 (30) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P V P V P V P 1 (25 mm) 4-5/8 (117) 1-3/4 (44) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4 (32 mm) 4-5/8 (117) 1-3/4 (44) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) 1-1/2 (40 mm) 5-3/8 (137) 1-13/16 (46) 1-9/16 (40) 11-3/32(282) 8-7/32 (209) 2 (50 mm) 6-1/8 (156) 2-1/4 (57) 1-5/8 (42) 11-5/32 (283) 8-9/32 (210) 1/2 4-3/16 (106) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 3/4" 5-7/16 (138) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P 1" 6-5/8 (168) 1-3/4 (45) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4" 6-13/16 (173) 1-3/4 (45) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) 1-1/2" 8-5/16 (211) 1-13/16 (45) 1-9/16 (40) 11-3/32(282) 8-7/32 (209) 2" 9-3/16 (233) 2-1/16 (53) 1-5/8 (42) 11-5/32 (283) 8-9/32 (210) ssembly height, centerline of vlve body to top of ctutor (see Figure-1). Leve n dditionl 3 (76 mm) clernce for cover removl. F opyright 2011 Schneider Electric ll Rights Reserved. 9

10 V P SE Flred V P NPT Threded V P Rp Threded V P NPT Threded V P Union Swet Figure-3 Three-Wy V-73xx Vlve ody Dimensions Tble-10 Dimensions Three-Wy Vlves (see Figure-1 nd Figure-3) Vlve ody Prt Number Dimensions in Inches (mm) U-olt Style -D Screw Mount Style -D V P 5/8 OD 4 ( /4 (57) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 1/2 (15 mm) 3-1/16 (76) 1-3/4 (44) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 3/4 " (20 mm) 3-5/8 (92) 1-13/16 (46) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P V P 1" (25 mm) 4-5/8 (118) 1-3/4 (44) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4" (32 mm) 4-5/8 (118) 1-3/4 (44) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) 1-1/2" (40 mm) 5-3/8 (137) 1-13/16 (46) 1-9/16 (40) 11-3/32(282) 8-7/32 (209) 2" (50 mm) 6-1/8 (156) 2-1/4 (57) 1-5/8 (42) 11-5/32 (283) 8-9/32 (210) 1/2" 4-3/16 (106) 2-5/16 (59) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 3/4" 5-7/16 (138) 2-5/8 (67) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P 1" 6-5/8 (168) 3-3/16 (81) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4" 6-13/16 (173) 3-7/16 (87) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) 1-1/2" 8-5/16 (211) 3-3/4 (95) 1-9/16 (40) 11-3/32(282) 8-7/32 (209) 2" 9-3/16 (233) 4-3/16 (106) 1-5/8 (42) 11-5/32 (283) 8-9/32 (210) 1/2" 3-1/16 (76) 1-3/8 (35) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) 3/4" 3-5/8 (92) 1-11/16 (43) 1-1/8 (29) 10-21/32 (271) 7-25/32 (198) V P 1" 4-5/8 (118) 1-9/16 (40) 1-3/16 (30) 10-23/32 (272) 7-27/32 (199) 1-1/4" 4-5/8 (118) 1-5/8 (41) 1-7/16 (37) 10-31/32 (279) 8-3/32 (206) 1-1/2" 5-3/8 (137) 1-11/16 (43) 1-9/16 (40) 11-3/32(282) 8-7/32 (209) 2" 6-1/8 (156) 1-7/8 (48) 1-5/8 (42) 11-5/32 (283) 8-9/32 (210) opyright 2011, Schneider Electric ll brnd nmes, trdemrks nd registered trdemrks re the property of their respective owners. Informtion contined within this document is subject to chnge without notice. F Schneider Electric 1354 lifford venue P.O. ox 2940 Loves Prk, IL