2.0 Connector System IEC Definition of Terms Contact length of the rear and front mating area Connector according to IEC

Size: px

Start display at page:

Download "2.0 Connector System IEC Definition of Terms Contact length of the rear and front mating area Connector according to IEC"

Donald Floyd
5 years ago
Views:

2 Definition of Terms Connector according to The hardmetric connector system ept-hm 2.0 was developed according to the international standard. As a result, a worldwide standard for the combination of PCBs is safeguarded by multicontact plug-and-socket connectors for customers. PCBs can be exchanged without problems from system to system. Important parameters like fixing, shielding and coding remain compatible to all applications. The spacing Contact length of the rear and front mating area ept offers 3 different lengths for the front mating area and 4 lengths for the rear mating area for the hm 2.0 male connectors. Different contact lengths are required for signal and ground contacts to establish first make and last break features. The long contacts with 11,25 mm are predominantly used for the shielding rows z and f. Thru hole specification of the PCB Throughplated holes for signal contacts and shieldings in press-fit techniques. The ept-hm 2.0 connectors have been developed with a spacing of 2 mm between contacts. These connectors are modular and therefore can be stacked together without interrupting the continuity of the 2 mm design. No space is wasted within a row of connectors. Hole Ø Drillhole Cu 0,6 mm 0,68-0,72 mm min. 25 µ m Module stacking To improve stacking and to avoid accidental reversal of connectors the end of the housings engage the adjacent connector to insure exact positioning onto the PCB board and give the modules the necessary support. Sn Plated through hole Derating Diagram 5-15 µ m 0,55-0,65 mm Coding A In order to avoid accidental plug in among PC boards the IEC standard provides protection through coding. Coding keys are easily hand inserted into the multifunction block of the connector module A, L and M. The pins are color coded for fast visual recognition. Multifunction block The modules A, L, M and compact PCI are equipped with a multifunction block. The coding devices, according to the IEC standard, can be added to the multifunction block. The guides guaranty the correct mating and prohibit accidental reversal of the male and fermale connectors. That coding devices may be assembled by a single plug and pulling tool and/or again removed. Operating Current [A] 3,5 3 2,5 2 1,5 1 0,5 loaded like a chess board every 2nd row loaded fully loaded C Ambient Temperature [ C] 2.2 ept GmbH & Co. KG Phone / Fax / sales@ept.de

3 Technical Notes Electrical and mechanical data Spacing Temperature range Mechanical durability 2 mm - 55 C bis +125 C > 250 Mating Cycles Housing Polyester Glass filled acc. UL 94V-0 Contact resistance acc. to IEC Contact material Male and female contact surface Insulation resistance acc. IEC Insertion force per pin Extraction force per pin Male contact Female contact max. 20mΩ Bronze Bronze Au over PdNi over Ni Contact/Contact min MΩ Contact/Shield min MΩ Contact Shield Contact Shield max. 0,75 N max. 1 N min. 0,15 N min. 0,15 N Test voltage fully loaded every 2nd position Chessboard Row a, c, e Row b, d Row a, b, c Row a, b, c, d Row a, b, c, d, e within row between rows within row between rows 750 Ve f 1500 Ve f 750 Ve f 750 Ve f 1500 V f 1500 V f 1500 Ve f 750 Ve f -- e -- e 1500 Vef f 1200 Vef f Creepage- and air gaps Row a, c, e Row b, d Row a, b, c Row a, b, c, d Row a, b, c, d, e within row between rows within row between rows Male connector fully loaded Modules Female connector every 2nd positon Backplane Male connector Modules Female connector Backplane Male connector Chessboard Modules Female connector 0,8 mm 0,6 mm 2,5 mm 2,5 mm ,5 mm 2,5 mm 2,5 mm 2,5 mm ,8 mm 0,6 mm 2,5 mm 2,5 mm 2,5 mm 2,5 mm 0,8 mm 0,6 mm 0,8 mm 0,6 mm 1,5 mm 1,2 mm ept GmbH & Co. KG Phone / Fax / sales@ept.de 2.3

4 Electrical Characteristics The connector system ept hm 2.0 was specially designed for high data rates. Below are a few examples of the HF characteristics. A spice model is available for simulations during system design. The simulation model was verified with TDR measurements. Z [Ohm] Change of impedance along the pin of row d of the ept connector hm2.0 Impedance after the elimination of multiple reflections, after impedance peeling Female part male part Solder joint Solder joint Connector (Pin length of Row d = 22.5 mm) Time [psec] Ureflect_max is the maximum voltage reflected from the connector in percent. Ureflect_max is plotted as a function of the signal rise time. The connector is the only electrical discontinuity in a chosen 50Ohm System. 15% 10% 14% 13% 9% U reflect_max = f(trise) U reflect_max [%] 5% 1% 0% 0% trise [psec] 2.4 ept GmbH & Co. KG Phone / Fax / sales@ept.de

5 Coupling (Cross talk) The near end and far end coupling was measured and simulated for different arrangements. A 200 mv signal with a rise time of 25 psec was used. Crosstalk of a row d pin into an adjacent row d pin (from C to G) Measured Ucoupling, near end coupling Measured Ucoupling, far end coupling Basic signal noise Simulated Ucoupling, near end coupling Simulated Ucoupling, far end coupling Ucoupling [V] Near End Coupling Far End Coupling Time [psec] Crosstalk of a pin in row d pin to an adjacent row e pin. (FromCtoAorE) Measured Ucoupling, near end coupling Measured Ucoupling, far end coupling Basic signal noise Simulated Ucoupling, near end coupling Simulated Ucoupling, far end coupling Ucoupling [V] Near End Coupling Far End Coupling Time [psec] b c d e 0 D B C A D E G ept GmbH & Co. KG Phone / Fax / sales@ept.de 2.5

6 0 A A A M A L A A C * A A B A B B 75 ** 100 N A A A A B A B B C * L A A ** System modularity * total length for Europa cards **total length for ETSI PCB`s B B 275 ept-hm 2.0 modules offer a great versatility to optimize large contact densities. Especially the combination with coaxial or fiberoptic connections. 300 Stacking can be arranged from 50 mm using type A module, increasing in 25 mm steps to required lengths. A A 325 Connectors with multifunction block (type A, M, L) are preferably used at the top of any column. Type B is only used between other modules. The modules type C and N (25 mm) are polarized and are used at the bottom end of the columns. 350 Correct mating is assured by use of coding keys within the multifunction block and by use of type C and N modules. A ept GmbH & Co. KG Phone / Fax / sales@ept.de

7 2.0 C onne c tor Sy ste m IEC Dimensions of C onta c ts C onta c t Options Front ma ting Used for A 8,25±0,1 signa l c onta c t B without ma ting a rea 9,75±0,1 signa l c onta c t C 11,25±0,1 shielding K 8,25±0,1 signa l c onta c t L with ma ting a rea 13 mm 9,75±0,1 signa l c onta c t M 11,25±0,1 shielding N 8,25±0,1 signa l c onta c t P with ma ting a rea 14,5 mm 9,75±0,1 signa l c onta c t Q 11,25±0,1 shielding R 8,25±0,1 signa l c onta c t S with ma ting a rea 16 mm 9,75±0,1 signa l c onta c t T 11,25±0,1 shielding

8 2.0 C onne c tor Sy ste m IEC Ma le C onne c tors Ty pe A Dime nsions in mm Printe d C irc uit La y out 2.8 e p t G mb H & C o. KG Pho ne / Fa x /55 07 E-M a il sa le s@ e p t.d e http :// p t.d e

9 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z - -/- a A 8,25/3,7 b A 8,25/3,7 110 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f - -/- z - -/- a B 9,75/3,7 b B 9,75/3,7 110 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f - -/- z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 154 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 154 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f C 11,25/3,7 cpci Hot Swap z C 11,25/3,7 a B 9,75/3,7 b * * 154 c * * d * * e B 9,75/3,7 f C 11,25/3,7 cpci Telephony Spec. z a * * b * * 100 c * * d * * e * * f * * z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 154 c P 9,75/14, d P 9,75/14,5 e P 9,75/14,5 f T 11,25/16,0 z T 11,25/16,0 a N 8,25/14,5 b N 8,25/14,5 154 c N 8,25/14, d N 8,25/14,5 e N 8,25/14,5 f T 11,25/16,0 * Attention: Please consider the different pin length in the assembly drawing. Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part No W25 ept GmbH & Co. KG Phone / Fax / sales@ept.de 2.9

10 Female Connectors Type A Type No. of Positions Quality Class Part Numbers connector without shielding 110 I II connector with shielding 110 I II connector with shielding 90 I cpci Telephony Spec. II lower shield ept Guglhör Peiting GmbH&Co. Phone / Fax / sales@ept.de

11 Engineering Notes ept GmbH & Co. KG Phone / Fax / sales@ept.de

12 Male Connectors Type B Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part No W25 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z / a A 8,25/3,7 b A 8,25/3,7 125 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f / z / a B 9,75/3,7 b B 9,75/3,7 125 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f / z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 175 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 175 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f C 11,25/3, ept GmbH & Co. KG Phone / Fax / sales@ept.de

13 Female Connectors Type B Type No. of Positions Part Numbers without shielding with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

14 Male Connectors Type B-22 (Compact PCI P2/P5) Printd Circuit Layout Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part No W22 Assembly Drawing No. of Positions Row Type Pin lenght Part Numbers z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 154 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 cpci Telephony Spec. z C 11,25/3,7 a * * b * * 154 c * * d * * e * * f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 154 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 154 c P 9,75/14, d P 9,75/14,5 e P 9,75/14,5 f T 11,25/16, ept GmbH & Co. KG Phone / Fax / sales@ept.de

15 Female Connectors Type B-22 (Compact PCI J2/J5) Type No. of Positions Part Numbers without shielding with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

16 Male Connectors Type B-19 (VME J0 and C-PCI P3) Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part No W19 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z / a A 8,25/3,7 b A 8,25/3,7 95 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f / z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 133 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 133 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 133 c P 9,75/14, d P 9,75/14,5 e P 9,75/14,5 f T 11,25/16, ept GmbH & Co. KG Phone / Fax / sales@ept.de

17 Female Connectors Type B-19 (VME P0 and C-PCI J3) Type No. of Positions Part Numbers without shielding with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

18 Male Connectors Type C Printed Circuit Layout Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part No W11 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z / a A 8,25/3,7 b A 8,25/3,7 55 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f / z / a B 9,75/3,7 b B 9,75/3,7 55 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f / z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 77 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 77 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f C 11,25/3, ept GmbH & Co. KG Phone / Fax / sales@ept.de

19 Female Connectors Type C Printed Circuit Layout Type No. of Positions Part Numbers without shielding with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

20 Male Connectors Type AB-25 Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part No W25 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z / a A 8,25/3,7 b A 8,25/3,7 125 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f / z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 169 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 169 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 169 c P 9,75/14, d P 9,75/14,5 e P 9,75/14,5 f T 11,25/16, ept GmbH & Co. KG Phone / Fax / sales@ept.de

21 Female Connectors Type AB-25 Type No. of Positions Part Numbers connectors without shielding connectors with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

22 Male Connectors Type AB-22 Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part No W22 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z / a A 8,25/3,7 b A 8,25/3,7 110 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f / z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 146 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 146 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 146 c P 9,75/14, d P 9,75/14,5 e P 9,75/14,5 f T 11,25/16, ept GmbH & Co. KG Phone / Fax / sales@ept.de

23 Female Connectors Type AB-22 Type No. of Positions Part Numbers connectors without shielding connectors with shielding ept GmbH & Co. KG Phone / Fax / sales@ept.de

24 Male Connectors Type AB-19 Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part No W19 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z / a A 8,25/3,7 b A 8,25/3,7 95 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f / z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 127 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 127 c B 9,75/3, d B 9,75/3,7 e B 9,75/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 127 c P 9,75/14, d P 9,75/14,5 e P 9,75/14,5 f T 11,25/16, ept GmbH & Co. KG Phone / Fax / sales@ept.de

25 Female Connectors Type AB-19 Type No. of Positions Part Numbers connectors without shielding connectors with shielding ept GmbH & Co. KG Phone / Fax / sales@ept.de

Male Connectors Type Compact PCI (P1+P2/P4+P5) Assembly Drawing No. of Pos. Row Type Pin length Part Numbers * Attention: Please consider the different pin length in the assembly drawing.

26 Male Connectors Type Compact PCI (P1+P2/P4+P5) Assembly Drawing No. of Pos. Row Type Pin length Part Numbers * Attention: Please consider the different pin length in the assembly drawing. Is used for Compact PCI Insertion Tool: Part No W47 On Request: Telephony Spec./Hot Swap Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 z C 11,25/3,7 a B 9,75/3,7 b * * /3,7 308 c * * /3, d * * /3,7 e B 9,75/3,7 f C 11,25/3,7 z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 308 c A 8,25/3, d A 8,25/3,7 e A 8,25/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 308 c P 9,75/14, d P 9,75/14,5 e P 9,75/14,5 f T 11,25/16, ept GmbH & Co. KG Phone / Fax / sales@ept.de

27 Engineering Notes ept GmbH & Co. KG Phone / Fax / sales@ept.de

28 Male Connectors Type D Assembly Drawing No. of Positions Row Type Pin length Part Numbers Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part Number W25 z / a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 176 d A 8,25/3,7 e A 8,25/3, f A 8,25/3,7 g A 8,25/3,7 h A 8,25/3,7 y / z C 11,25/3,7 a A 8,75/3,7 b A 8,75/3,7 c A 8,75/3,7 220 d A 8,75/3,7 e A 8,75/3, f A 8,75/3,7 g A 8,75/3,7 h A 8,75/3,7 y C 11,25/3, ept GmbH & Co. KG Phone / Fax / sales@ept.de

29 Female Connectors Type D Printed Circuit Layout Type No. of Positions Part Numbers connector without shielding connector with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

30 Male Connectors Type E Assembly Drawing No. of Positions Row Type Pin length Part Numbers Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part Number W25 z / a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 200 d A 8,25/3,7 e A 8,25/3, f A 8,25/3,7 g A 8,25/3,7 h A 8,25/3,7 y / z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 250 d A 8,25/3,7 e A 8,25/3, f A 8,25/3,7 g A 8,25/3,7 h A 8,25/3,7 y C 11,25/3, ept GmbH & Co. KG Phone / Fax / sales@ept.de

31 Female Connectors Type E Printed Circuit Layout Type No. of Positions Part Numbers connector without shielding connector with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

32 Male Connectors Type F Assembly Drawing No. of Positions Row Type Pin length Part Numbers Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part Number W11 z / a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 88 d A 8,25/3,7 e A 8,25/3, f A 8,25/3,7 g A 8,25/3,7 h A 8,25/3,7 y / z C 11,25/3,7 a A 8,75/3,7 b A 8,75/3,7 c A 8,75/3,7 110 d A 8,75/3,7 e A 8,75/3, f A 8,75/3,7 g A 8,75/3,7 h A 8,75/3,7 y C 11,25/3, ept GmbH & Co. KG Phone / Fax / sales@ept.de

33 Female Connectors Type F Printed Circuit Layout Type No. of Positions Part Numbers connector without shielding connector with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

34 Male Connectors Type DE Assembly Drawing No. of Positions Row Type Pin length Part Numbers Note: PCB thickness 1,6-2,8 mm Part No. XXX-XXXXX-05 Insertion Tool: Part Number W25 z / a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 200 d A 8,25/3,7 e A 8,25/3, f A 8,25/3,7 g A 8,25/3,7 h A 8,25/3,7 y / z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 244 d A 8,25/3,7 e A 8,25/3, f A 8,25/3,7 g A 8,25/3,7 h A 8,25/3,7 y C 11,25/3, ept GmbH & Co. KG Phone / Fax / sales@ept.de

35 Female Connectors Type DE Type No. of Positions Part Numbers connector without shielding connector with shielding lower shield Insertion tool: Part Number ept GmbH & Co. KG Phone / Fax / sales@ept.de

36 Male Connectors Type L Assembly Drawing No. of Positions Row special contact Part Number 6 power / cable contacts pressfit coax Insertion Tool: Part Number W ept GmbH & Co. KG Phone / Fax / sales@ept.de

37 Female Connectors Type L Type No. of Positions Part Number connector without shielding ept GmbH & Co. KG Phone / Fax / sales@ept.de

38 Male Connectors Type M Assembly Drawing No. of Positions Row Type Pin length special contacts Part Numbers z / a A 8,25/3,7 power / b A 8,25/3,7 cable contacts 55+3 c A 8,25/3,7 d A 8,25/3,7 e A 8,25/3,7 pressfit coax f / z C 11,25/3,7 a A 8,25/3,7 power / b A 8,25/3,7 cable contacts 77+3 c A 8,25/3,7 d A 8,25/3,7 e A 8,25/3,7 pressfit coax f C 11,25/3,7 Insertion Tool: Part Number W ept GmbH & Co. KG Phone / Fax / sales@ept.de

39 Female Connectors Type M Type No. of Positions Part Numbers connector without shielding connector with shielding lower shield ept GmbH & Co. KG Phone / Fax / sales@ept.de

40 Male Connectors Type N Assembly Drawing No. of Positions Row special contact Part Number 3 power / cable contacts pressfit coax Insertion Tool: Part Number W ept GmbH & Co. KG Phone / Fax / sales@ept.de

41 Female Connectors Type N Type No. of Positions Part Number connector without shielding ept GmbH & Co. KG Phone / Fax / sales@ept.de

High Current Contacts for use with Type L, M and N Solder Contact Press-fit Contact Press-fit Contact Silicon Rubber Mating Area Au over Ni 3.57 6.07 17.17 4.75 5.21 Pressfit Area Au over Ni 3.76 min.

42 High Current Contacts for use with Type L, M and N Solder Contact Press-fit Contact Press-fit Contact Silicon Rubber Mating Area Au over Ni Pressfit Area Au over Ni 3.76 min min m Cu 5-12 m Sn Termination Methods Operating Current Part Numbers Solder Female Contact 30 A Press-fit Female Contact 40 A Press-fit Male Contact 40 A ept GmbH & Co. KG Phone / Fax / sales@ept.de

43 Coaxial Contacts for use with Type L, M and N for female connectors for male connectors Termination Methods Impedance Part Numbers for male connectors / / for female connectors ept GmbH & Co. KG Phone / Fax / sales@ept.de

Shrouds for Male Connectors Type A, B, B-22, B-19 and C PCB thickness < <3,2 mm 3,2-4 mm 4,0-4,8 mm > 4,8 mm X 6,3 mm 4,9 mm 4,5 mm 3,7 mm 2,9 mm Shroud 16,75 mm 15,35 mm 14,95 mm 14,15 mm 13,35 mm

44 Shrouds for Male Connectors Type A, B, B-22, B-19 and C PCB thickness < <3,2 mm 3,2-4 mm 4,0-4,8 mm > 4,8 mm X 6,3 mm 4,9 mm 4,5 mm 3,7 mm 2,9 mm Shroud 16,75 mm 15,35 mm 14,95 mm 14,15 mm 13,35 mm Connector Type Part Numbers A B B B C On request: other hights and special shrouds 2.44 ept GmbH & Co. KG Phone / Fax / sales@ept.de

45 Shrouds for Male Connectors Type AB PCB thickness < < 3,2 mm 3,2-4 mm 4,0-4,8 mm > 4,8 mm X 6,3 mm 4,9 mm 4,5 mm 3,7 mm 2,9 mm Shroud hight 16,75 mm 15,35 mm 14,95 mm 14,15 mm 13,35 mm Connector Type Part Numbers AB AB AB On request: other hights and special shrouds ept GmbH & Co. KG Phone / Fax / sales@ept.de

46 Overview compactpci Connectors Female connector for daughter card Location Shielding ept Part Number Type A J1 / rj1 / J4 / rj4 With upper shield Type B22 J2 / J5 With upper shield Type AB22* rj2 / rj5 With upper shield Type B19 J3 With upper shield Type AB19* rj3 With upper shield Type A for telephony J4 With split shield Type A for telephony (mirrored) rj4 With split shield * AB connector are used for rear transition cards if AB shrouds are used all connectors are also available without upper shield Male connector for Backplane Location Contact loading * ept Part Number Type A Hot Swap P1 CB***BC Type A Hot Swap for Midplane P1 TP***PT Type monoblock Hot Swap P1+P2 TP***PT Type B22 P2 CBBBBBC Type B22 AB compatible P2 / P5 *PPPPP* Type B22 AB compatible P2 / P5 *NNNNN* Type B22 AB compatible P2 / P5 *SSSSS* Type B19 P3 CBBBBBC Type B19 AB compatible P3 *PPPPP* Type B19 AB compatible P3 *NNNNN* Type B19 AB compatible P3 *SSSSS* Type A for telephony P4 -****** Type A for telephony Midplane P4 -****** Type A P4 TPPPPPT Type A P4 TNNNNNT Type A P4 TSSSSST Type B22 for telephony P5 C*****C Type B22 for telephony, Z row not loaded P5 -*****C Type B22 for telephony, Z row not loaded P5 -****** *different pins in that row / - not loaded all connectors are also without Z row loaded available / for other pin arrangements consult ept 2.46 ept GmbH & Co. KG Phone / Fax / sales@ept.de

47 Coding keys Color application ept Part Number Male Backplane Brilliant Blue 5V P Male Backplane Cadmium Yellow 3,3V P Male Backplane Strawberry red Telephony P Female Daughtercard Brilliant Blue 5V J Female Daughtercard Cadmium Yellow 3,3V J Female Daughtercard Strawberry red Telephony J Shrouds Location height Base thickness ept Part Number Type A P1 / P4 16,75 mm 6,3 mm Type A P1 / P4 15,35 mm 4,9 mm Type A P1 / P4 14,95 mm 4,5 mm Type A P1 / P4 14,15 mm 3,7 mm Type A P1 / P4 13,35 mm 2,9 mm Type AB22 P2 / P5 16,75 mm 6,3 mm Type AB22 P2 / P5 15,35 mm 4,9 mm Type AB22 P2 / P5 14,95 mm 4,5 mm Type AB22 P2 / P5 14,15 mm 3,7 mm Type AB22 P2 / P5 13,35 mm 2,9 mm Type AB19 P3 16,75 mm 6,3 mm Type AB19 P3 15,35 mm 4,9 mm Type AB19 P3 14,95 mm 4,5 mm Type AB19 P3 14,15 mm 3,7 mm Type AB19 P3 13,35 mm 2,9 mm The height / base thickness of the shrouds depend on the thickness of the Backplane ept GmbH & Co. KG Phone / Fax / sales@ept.de

48 Coding Devices Male connectors Female connectors C oding key Code No. Colour Part Numbers C oding key Code No. Colour Part Numbers 1236 Nut brown RAL Nut brown RAL Strawberry red RAL 3018 Telephony Spec Strawberry red RAL 3018 Telephony Spec Blue lilac RAL Blue lilac RAL Brillant blue RAL ,0 V C-PCI Brilliant blue RAL ,0 V C-PCI Reseda green RAL Reseda green RAL Cadmium yellow RAL ,3 V C-PCI Cadmium yellow RAL ,3 V C-PCI Slate grey RAL Slate grey RAL Steel blue RAL Steel blue RAL Pastel orange RAL Pastel orange RAL Ocher yellow RAL Ocher yellow RAL ept GmbH & Co. KG Phone / Fax / sales@ept.de

49 Fax request (5+2) Company Phone Number First Name Last Name Fax Number Adress Adress Signature Please quote me for pieces. Please send me sample pieces. Assembly reference: In order to be able to load the connectors economically we recommend a serial determination of the contact length. If only position 1 of a line is indicated, the entire line is loaded with this contact length. Exceptions can be registered at the respective position. Male-Type B A C K M L P N Q S R T Surface: Quality level 2 acc. to. Au over PdNi over Ni. ept GmbH & Co. KG Phone / Fax / sales@ept.de

50 Fax request (8+2) Company Phone Number First Name Last Name Fax Number Adress Adress Signature Please quote me for pieces. Please send me sample pieces. Male-Type B A C K M L P N Q S R T Assembly reference: In order to be able to load the connectors economically we recommend a serial determination of the contact length. If only position 1 of a line is indicated, the entire line is loaded with this contact length. Exceptions can be registered at the respective position. Surface: Quality level 2 acc. to. Au over PdNi over Ni ept GmbH & Co. KG Phone / Fax / sales@ept.de

51 Fax request AB Company Phone Number First Name Last Name Fax Number Adress Adress Signature Please quote me for pieces. Please send me sample pieces. Male-Type B A C K M L P N Q S R T Assembly reference: In order to be able to load the connectors economically we recommend a serial determination of the contact length. If only position 1 of a line is indicated, the entire line is loaded with this contact length. Exceptions can be registered at the respective position. Surface: Quality level 2 acc. to. Au over PdNi over Ni. ept GmbH & Co. KG Phone / Fax / sales@ept.de

hm connectors ept GmbH & Co. KG I Phone +49 (0) 88 61/ I Fax +49 (0) 88 61/55 07 I I

hm connectors ept GmbH & Co. KG I Phone +49 (0) 88 61/ I Fax +49 (0) 88 61/55 07 I I 26 Definitions 28 Technical specifications 29 Electrical properties 30 Cross talk 31 Hole specifications 32 System modularity 33 Pin lengths 34 Notes 35 hm 2.0 type A 36 hm 2.0 type B25 38 hm 2.0 type