Ordering Guide of the Tray Patching & Splicing Shelf (FIST-GPS2)

Transcription

1 FISTGPS2 (& FISTGPST12) Page 1 of Ordering Guide of the Tray Patching & Splicing Shelf (FISTGPS2) This document provides assistance with the selection of shelves for use in FIST cable termination applications. It includes the following sections: 1 Product description 2 2 Ordering information FISTGPS2 shelf FISTGPST12 trays Accessories Accessories for the 125 mm high version Accessories for the 88 mm high version Accessories for the 44 mm high version Ribbon cable termination accessories Tools & miscellaneous 6 3 Product guide Shelf description Chassis versions Tray layout Connector adapter with retainer (and pigtail if prefibered) Number of trays and content Shelf capacity Shelf dimensions Tray description Tray capacity Tray configuration Accessories Accessories for the 125 mm high version Accessories for the 88 mm high version Accessories for the 44 mm high version Ribbon cable termination accessories Tools & miscellaneous 22

2 FISTGPS2 (& FISTGPST12) Page 2 of Product description The generic tray patching & splicing shelf FISTGPS2 is the mechanical assembly for the fiber management system that provides the function of cable splicing and patchcord patching and connecting in a rack environment. This shelf can be used with Tyco racks as well as with other metric (ETSI) or 19 racks. Multiple configurations are possible: patching 1. between patchcords 2. preconnectorized breakout cable to patchcords 3. preconnectorized intrafacility cable to patchcords 4. ribbon pigtail (with micro fanout to single pigtails) to patchcords GPS23HU.JPG splicing 125 MM HIGH VERSION 1. loose tube cable to pigtails 2. non preconnectorized intrafacility cable to pigtails 3. non preconnectorized breakout cable to pigtails 4. ribbon fiber (ribbon splice and micro fanout) 5. and patching these pigtails to patchcords The Generic Splice/Patch Shelf Trays FISTGPST12 are the organizer trays that house the connector adapters (typical for 12 connectors per tray, or 24 small form factor connectors), fibers and patchcords. It allows for Single Element splicing on the tray itself. An optional basket can be installed for integrated jumper overlength storage. Refer to section 3.2 for limitations with respect to patchcord characteristics. 7N3K6471.JPG 88 MM HIGH VERSION Three different chassis types are available: 125 mm high version Maximum 6 trays (or 4 trays when the storage option is selected) can be installed 88 mm high version Maximum 4 trays (or 2 trays when the storage option is selected) can be installed 44 mm high version Maximum 2 trays (or 1 tray when the storage option is selected) can be installed All generic patching shelves consist of a metal chassis with drawer. A bracket is installed at the rear of the drawer on which the trays can be hinged. The connector adapters can be preinstalled in the organizer trays. Pigtails can be preinstalled in the splice unit area of the tray (prefibered options see section 2). Positive fiber management of the pigtails is guaranteed by bend controls on the trays and pigtail belts in the shelf. GPS21HU.JPG 44 MM HIGH VERSION

3 FISTGPS2 (& FISTGPST12) Page 3 of Ordering information 2.1 FISTGPS2 shelf Refer to section 3 for full product descriptions. Chassis type (Section 3.1.1) 125 mm high 88 mm high 44 mm high M I Metric 19 J 19 K 19 FISTGPS2XXX XX Tray options (Section 3.1.2) NN Without trays Other options contain GPST12 trays with following configuration: Cable type Patchcord or preconnectorized BOC Loose tube cable or IFC (connectorized or not) Non preconnectorized BOC Ribbon pigtail (patching only) Ribbon fiber (splicing & patching) R4 R8 R12 R4 R8 R12 Prefibered no (2) no no Splice holder or micro fanout SMOUV12 (1) ANT SMOUV12 (1) ANT SMOUV12 (1) ANT SMOUV12 (1) ANT micro fanout SMOUVR212 (3) & micro fanout Patchcords leave shelf side Left Right Left Right Std. Connectors AA IA JA EA FA KA LA GA HA R4A R8A R12A S4A S8A S12A AA AI AJ AE AF AK AL AG AH AR4 AR8 AR12 AS4 AS8 AS12 SFF Connectors AA MA NA PA QA T12A U12A BOC: Breakout cable (diameter of individual pigtails inside the BOC is max. 2.8 mm.) IFC: Intra facility cable (1) Only for SMOUV (45 mm long heatshrinkable splice protector) which is supplied with the kit. (2) Contact your local sales engineer for shelves with prefibered preconnectorized IFC. (3) Ribbon SMOUV included in the kit. AA AM AN AP AQ AT12 AU12 Connector adapter with retainer (and pigtails if prefibered) (Section 3.1.3) Connector type SC FC E2000 DIN ST MU LC None Single mode UPC A C K Q U1 L1 N APC B D F (*) Multimode 50/900µ S5D F5D E5D T5D 62.5/900µ S5E (**) F5E (**) E5E (**) T5E (**) Notes * E2000 pigtails are with E2000 connectors, centered ferrule tuning method, 0.1 db insertion loss ** In case of adapters only (not prefibered), use S5D, F5D, E5D or T5D) Number of trays & content (Section 3.1.4) Trays only Storage & Trays 0 No trays R Storage basket, no trays (chassis type M, I and J only) 2 2 trays S Storage basket + 1 tray (chassis type K only) 4 4 trays T Storage basket + 2 trays (chassis type M, I, J only) 6 6 trays U Storage basket + 4 trays (chassis type M and I only)

4 FISTGPS2 (& FISTGPST12) Page 4 of FISTGPST12 trays FISTGPST12 trays are asymmetrical, the patching area is not located in the center of the tray but slightly moved to one side. The patching areas of 2 consecutive trays should not fall on each other but alter. In general, all the patchcords of the trays within one shelf are leaving the shelf at the same side. Therefore trays are supplied per set of 2 complementary pieces. Example tray exit patchcords patching area } set } set shelf exit patchcords of 2 complementary trays of 2 complementary trays Patchcord unit Splice unit The following combinations are available (Refer to section 3 for more details): FISTGPST12XX X2 Tray layout (Section 3.1.2) Trays are ordered per set of 2 complementary pieces (each set can hold 24 std. connectors or 48 SFF connectors) with the following configuration: Cable type Patchcord or preconnectorized BOC Loose tube cable or IFC (connectorized or not) Non preconnectorized BOC Ribbon pigtail (patching only) R4 R8 R12 Prefibered no (2) no no Splice holder or micro fanout SMOUV12 (1) ANT SMOUV12 (1) ANT SMOUV12 (1) ANT SMOUV12 (1) ANT micro fanout Patchcords leave shelf side Left Right Left Right Std. Connectors AA IA JA EA FA KA LA GA HA R4A R8A R12A AA AI AJ AE AF AK AL AG AH AR4 AR8 AR12 SFF Connectors AA MA NA PA QA T12A AA AM AN AP AQ AT12 Ribbon fiber (splicing & patching) R4 R8 R12 SMOUVR212 (3) & micro fanout S4A S8A S12A AS4 AS8 AS12 BOC: Breakout cable (diameter of individual pigtails inside the BOC is max. 2.8 mm.) IFC: Intra facility cable (1) Only for SMOUV (45 mm long heatshrinkable splice protector) which is supplied with the kit. (2) Contact your local sales engineer for shelves with prefibered preconnectorized IFC. (3) Ribbon SMOUV included in the kit. Connector adapter with retainer (and pigtails if prefibered) (Section 3.1.3) U12A AU12 Connector type SC FC E2000 DIN ST MU LC None Single mode UPC A C K Q U1 L1 N APC B D F (*) Multimode 50/900µ S5D F5D E5D T5D 62.5/900µ S5E (**) F5E (**) E5E (**) T5E (**) Notes * E2000 pigtails are with E2000 connectors, centered ferrule tuning method, 0.1 db insertion loss ** In case of adapters only (not prefibered), use S5D, F5D, E5D or T5D)

5 FISTGPS2 (& FISTGPST12) Page 5 of Accessories Accessories for the 125 mm high version Name Qty/Pk Description FISTCTS2 1 pc Side cable termination unit for GPS2 (for max. 2 cables) FISTCTB2 1 pc Back cable termination unit for GPS2 (for max. 2 cables) FISTMB2M 1 pc ETSI mounting brackets for 19 shelf FISTMB2MAS 1 pc ETSI mounting brackets for 19 shelf (asymmetrical mounting) FISTGSFLEX1750S m Flexible tubing, internal 17 mm FISTGPS2ID10 10 pc Identification cards and card holders Accessories for the 88 mm high version Name Qty/Pk Description FISTCT2HUS2 1 pc Side cable termination unit for GPS2 (for max. 2 cables) FISTCT2HUB2 1 pc Back cable termination unit for GPS2 (for max. 2 cables) FISTMB22HUM 1 pc ETSI mounting bracket for 19 shelf FISTMB22HUMAS 1 pc ETSI mounting bracket for 19 shelf (asymmetrical mounting) FISTGSFLEX m Flexible tubing, internal 12 mm FISTGPS22HUID10 10 pc Identification cards and card holders Accessories for the 44 mm high version Name Qty/Pk Description FISTCT1HUB1 1 pc Back cable termination unit for GPS2 (for 1 cable) FISTMB21HUM 1 pc ETSI mounting bracket for 19 shelf FISTGSFLEX1050S m Flexible tubing, internal 10 mm FISTGPS21HUID10 10 pc Identification cards and card holders Ribbon cable termination accessories Name Qty/Pk Description FISTGRCTB100 1 pc Cable termination kit for max. 2 loose tube/ribbon cables FISTGRCTB100CC 1 pc Cable termination kit for max. 2 central core cables (single fiber or ribbon) FISTGRTD5MM 1 pc Tube divider 6 in 6 out (for GR) FISTGPS2TD5MM 1 pc Tube divider 6 in 6 out (for GPS2 chassis types) FISTTUBE5MM30 30 m 5 mm tubing

6 FISTGPS2 (& FISTGPST12) Page 6 of Tools & miscellaneous Name Qty/Pk Description FISTGTU2 18 pc Group termination units FISTVE m Velcro roll FACCCAGENUTTOOL 1 pc Cage nut installation tool FACCALLENKEY pc Allen key, diameter 5 mm, length 350 mm for back mounting of shelf in rack

7 FISTGPS2 (& FISTGPST12) Page 7 of Product guide 3.1 Shelf description Chassis versions 125 mm high version Two chassis versions are available: metric and 19 width. They both are painted like the cover. The shelf has fieldmountable brackets to accommodate for: front mounting of the shelf mounting with brackets 240 mm from the back of the shelf mounting specifically for Raychem s FIST racks back mounting For ease of access to the connectors, the drawer can be pulled out and held in position with a releasable spring. The drawer is equipped with the bracket necessary for mounting the trays and Velcro to secure them. It contains a metal hingeable cover with one central latch. Cards are provided at the inside of the cover for a clear identification. Cable attachment: In general cables are attached either to brackets on specific locations inside the rack (see ordering guides FISTWR, FISTGR2) or to the side or back of the shelf. Kits for side or back attachment to shelves should be ordered separately (see section 3.5). Other elements are fitted according to the options selected. Identification cards (2) and two card holders are provided at the back side of the front cover. (Cards will be visible when the cover is open). 88 mm high version One chassis version is available: 19. However mounting between ETSI mounting profiles (like for example in the FISTGR2 or WR) is possible using the adaptation brackets. The shelf has fieldmountable brackets to accommodate for: front mounting of the shelf mounting with brackets 240 mm from the back of the shelf mounting specifically for Raychem s FIST racks (in combination with the 19 ETSI adaptation brackets to be ordered separately) back mounting For ease of access to the connectors, the drawer can be pulled out and held in position with a releasable spring. The drawer is equipped with the bracket necessary for mounting the trays and Velcro to secure them. The metal front cover is part of the drawer and contains 2 screws to close the drawer. Cable attachment: In general cables are attached either to brackets on specific locations inside the rack (see ordering guides FISTWR, FISTGR2) or to the side or back of the shelf. Kits for side or back attachment to shelves should be ordered separately (see section 3.5). Other elements are fitted according to the options selected. Identification cards (2) and two card holders are provided on the front side of the drawer.

8 FISTGPS2 (& FISTGPST12) Page 8 of mm high version One chassis version is available: 19. However mounting between ETSI mounting profiles is possible using the adaptation brackets. The shelf has fieldmountable brackets to accommodate for: front mounting of the shelf mounting with brackets 240 mm from the back of the shelf mounting specifically for Raychem s FIST racks (in combination with the 19 ETSI adaptation brackets to be ordered separately) back mounting The drawer is equipped with the bracket necessary for mounting the trays. The metal front cover is part of the drawer. Cable attachment: In general cables are attached either to brackets on specific locations inside the rack (see ordering guides FISTWR, FISTGR2) or to the side or back of the shelf. Kits for back attachment to shelves should be ordered separately (see section 3.5). An identification label is provided on the front side of the drawer.

9 FISTGPS2 (& FISTGPST12) Page 9 of Tray layout FISTGPS2 can be ordered: without trays, option NN should be selected in that case. with trays including connector adapters with retainers and with pigtails if a prefibered tray layout is selected (see following paragraphs). The tray has a modular design: it consists of a base plate, on which 2 units can be clicked. The tray layout parameter will differ depending on the type of units installed and on which side the patchcords will leave the shelf. patchcord unit patching area splice unit splice holder FGPS2002.JPG Example: Note that patchcords which enter the shelf at the RIGHT side, are routed to the patchcord unit located at the LEFT side of the tray. Type AI cable attachment plate A I GPS2015.JPG In case the patchcords would enter the shelf from the left side; the pigtail unit (A) has to be at the right and the splice unit (I) at the left; this setup would require a type IA. The splice unit will get a different parameter depending on the splice holder type and whether the unit has to be prefibered or not. The different tray layout options are described in the following paragraphs.

10 FISTGPS2 (& FISTGPST12) Page 10 of Patching between patchcords In this layout, two identical patch units are installed on the baseplate. This layout could also be used for patching preconnectorized breakout cable. Tray layout: AA GPS2 Splicing & patching loose tube cable to pigtails The loose tube is terminated on the tray and the fibers are spliced to the secondary coated pigtails coming from the patchpanel. The pigtail which is spliced in the splice unit should be 0.58 to 1.5 m long (and can be respliced 0 up to 6 times, depending on its length). We recommend a pigtail length of 1 meter, which allows 5 resplices. GPS2013.JPG Prefibered trays contain the selected adapters with retainers and the pigtails between the patching area and splice holder. Pigtails are 900 µm, semitight and 1.5 m long (for the connector type of the pigtail, see section 3.1.3)..7N3K4422 Tray layout Splice protector Standard connectors SFF connectors (small form factor) Prefibered * SMOUV AI IA MA AM ANT AJ JA NA AN Not prefibered SMOUV AE EA PA AP ANT AF FA QA AQ

11 FISTGPS2 (& FISTGPST12) Page 11 of Splicing and patching breakout cable to pigtails A breakout cable contains individual 900 µm fibers with kevlar and outer jacket (up to 2.8 mm) and a strength member which are bundled in an outer jacket. A breakout cable can be preconnectorized or non preconnectorized. When preconnectorized, the patch units (AA) have to be used. GTU BOC.JPG Three GTU's (group termination units) are used to attach the pigtail kevlar per group of 4 pigtails when the breakout cable is notpreconnectorized The pigtail which is spliced in the splice unit should be 0.58 to 1.5 m long (and can be respliced 0 up to 6 times, depending on its length). We recommend a pigtail length of 1 meter, which allows 5 resplices. * Prefibered trays contain the selected adapters with retainers and the pigtails between the patching area and splice holder. Pigtails are 900 µm, semitight and 1.5 m long (for the connector type of the pigtail, see section 3.1.3). GPS2014.JPG Tray layout Splice protector Standard connectors Prefibered * SMOUV AK KA ANT AL LA Not prefibered SMOUV AG GA ANT AH HA SFF connectors (small form factor) Not applicable

12 FISTGPS2 (& FISTGPST12) Page 12 of Splicing and patching IFC cable to pigtails An IFC is an amount (e.g. 8 or 12) of 900 µm pigtails bundled in an outer jacket with kevlar and can be preconnectorized or non preconnectorized. An IFC has the great advantage of giving less congestion than 12 individual pigtails with outer jacket and kevlar. Intrafacility cable is routed on the splice unit, whether it is preconnectorized or not. In case one connector fails or a fiber breaks, the complete IFC should not be replaced since the splice holder can be used to splice a new pigtail to the broken fiber. 7N3K1584.JPG * Prefibered trays contain the selected adapters with retainers and the pigtails between the patching area and splice holder. Pigtails are 900 µm, semitight and 1.5 m long (for the connector type of the pigtail, see section 3.1.3). GPS2015.JPG Tray layout Splice protector Standard connectors SFF connectors (small form factor) Prefibered * SMOUV AI IA MA AM ANT AJ JA NA AN Not prefibered SMOUV AE EA PA AP ANT AF FA QA AQ

13 FISTGPS2 (& FISTGPST12) Page 13 of Patching Ribbon pigtails Ribbon pigtail Single fiber pigtails Micro fanout GPS2 Patchcord Ribbonized fibers are primary coated fibers placed next to each other in one plane. An acrylate coating or polter tape keeps the fibers together. Most common are 4, 8 and 12fiber ribbon cable. * The ribbon pigtail (part up to the micro fanout) is 5 m long. The single fiber pigtails are 900 µm and semitight, for the connector type of the pigtail, see section A connector adapter with retainer should always be selected in the case of ribbon pigtail. GPS2016.JPG Tray layout Ribbon type # fanouts per tray Std conn. SFF conn. Standard connectors SFF connectors (small form factor) Prefibered * R4 3 AR4 R4A R8 1 AR8 R8A Contact PM R AR12 R12A AT12 T12A Not prefibered Not applicable Not applicable

14 FISTGPS2 (& FISTGPST12) Page 14 of Patching & splicing ribbon fiber Ribbon fiber Single fiber pigtails Micro fanout Patchcord Ribbonized fibers are primary coated fibers placed next to each other in one plane. An acrylate coating or polter tape keeps the fibers together. Most common are 4, 8 and 12fiber ribbon cable. GPS2 The ribbon of the incoming cable is being spliced to the fanout. The single fiber pigtails are 900 µm and semitight, for the connector type of the pigtail, see section A connector adapter with retainer should always be selected in the case of ribbon pigtail. Ribbon SMOUVs are included in the kit. A 864 fiber ribbon cable can be terminated as follows: 6 tubes, each containing 1 ribbon 12 Tray 1 Tray Ribbon Fanout GPS2 Single fiber GPS2 GPS2 FISTTUBE5MM30 7N3K1588.JPG FISTGPS2TD5MM GPS2 12 tubes, each containing 6 ribbon 12 s, each going to 1 GPS2 shelf FISTGRCTB fiber ribbon cable Tray layout Ribbon type # fanouts per tray Std conn. SFF conn. Standard connectors SFF connectors (small form factor) Prefibered * R4 3 AS4 S4A R8 1 AS8 S8A Contact PM R AS12 S12A AU12 U12A Not prefibered Not applicable Not applicable

15 FISTGPS2 (& FISTGPST12) Page 15 of Connector adapter with retainer (and pigtail if prefibered) Unprefibered shelves can be ordered with trays including preinstalled adapters and retainers. Select the appropriate adapter from the name string table page 3, or N for none. The trays of prefibered shelves always include preinstalled adapters with retainers and pigtails. Pigtails are 900 µm, semitight and 1.5 m long (ribbon pigtails are shorter). Select the appropriate connector type from the table below: Connector type Single mode connectors Multimode connectors UPC APC 8 UPC 50 db 60 db 50 db 60 db SC A B S5D S5E FC C D F5D F5E E2000 F (1) E5D E5E DIN K ST Q (2) T5D T5E MU U1 LC L1 (1) Centered ferrule tuning method (2) ST/PC, 45 db (not 50 db)

16 FISTGPS2 (& FISTGPST12) Page 16 of Number of trays and content The number of trays can be selected. Furthermore, the GPS2 offers the possibility to store a random overlength of jumpers underneath the trays. The storage basket s height equals 2 trays in the 3HU and 2HU shelf and equals 1 tray in the 1HU shelf. Example of storage in 44 mm high version GPS21HU.JPG Legend: FISTGPST12 tray Options Chassis height 125 mm 88 mm 44 mm Storage basket for 3HU and 2HU chassis 0 Storage basket for 1HU chassis 2 4 NA 6 NA NA R NA S NA NA T NA U NA NA

17 FISTGPS2 (& FISTGPST12) Page 17 of Shelf capacity Capacity Chassis type M, I J K # trays per shelf without storage basket with storage basket # connectors per shelf without storage basket with storage basket Std SFF Std SFF Std Compatible tray (set of 2 trays) FISTGPST12XXX2 # connectors per tray 12 (std. connectors) / 24 (SFF connectors) Splicing capacity 12 or 24 splices when splice unit is used Jumper length inside shelf 0.9 m SFF Limitations with respect to patchcord characteristics The shelf for standard connectors is designed for patchcords with 2.4 mm. The shelf for SFF connectors is designed for patchcords with 1.7 mm and the length of the connector inclusive boot shall be max. 40 mm for the pigtails located at the splicing side of the tray. Contact the product manager for applications not covered by this document. 3.3 Shelf dimensions Dimensions in mm Width (with/without mounting brackets) Height HU Height units Chassis type M I J K 531 / / / metric HU 3 19 HU 2 19 HU 1 19 HU Depth Note: A HU is a height unit. Refer to rack documentation for more details. 3.4 Tray description Tray capacity Tray FISTGPST12XXX2 # connectors per tray 12 or 24 Splicing capacity 12 or 24 splices when splice unit is used Tray configuration Please refer to the tray layouts in section

18 FISTGPS2 (& FISTGPST12) Page 18 of Accessories Accessories for the 125 mm high version Cable termination side FISTCTS2 Cable termination unit side, to terminate max. 2 cables at the side of the shelf. This kit contains: bracket flextube 1 flextube clamp 2 strength member fixation devices mounting screws tiewraps DSC00055.JPG DSC00007.JPG Cable termination back FISTCTB2 Cable termination unit back, to terminate max. 2 cables at the back of the shelf. This kit contains: bracket flextube 1 flextube clamp 2 strength member fixation devices mounting screws tie wraps ETSI mounting brackets for 19 shelf FISTMB2M ETSI mounting brackets to mount a 19 shelf (125 mm high) between ETSI mounting profiles. 7N3K4322.JPG Asymmetrical ETSI mounting brackets for 19 shelf FISTMB2MAS ETSI mounting brackets to mount a 19 shelf (125 mm high) asymmetrically between ETSI mounting profiles (to gain space at one side of the shelf). A modified trumpet is provided in the kit in case a trumpet has to be mounted at the narrow side. 7N3K4323.JPG Flexible tubing FISTGSFLEX1750S m of flextube (internal 17 mm) to route and group tubes from a cable attachment plate to the shelves when no side or back termination plate is used. RA11.JPG

19 FISTGPS2 (& FISTGPST12) Page 19 of Identification cards and card holders FISTGPS2ID10 10 identification cards and card holders. For detailed layout, see Addendum 1. 7N3K5401.JPG Accessories for the 88 mm high version Cable termination side FISTCT2HUS2 Cable termination unit side, to terminate max. 2 cables at the side of the shelf. This kit contains: bracket flextube 1 flextube clamp 2 strength member fixation devices mounting screws tiewraps DSC00002.JPG DSC00005.JPG Cable termination back FISTCT2HUB2 Cable termination unit back, to terminate max. 2 cables at the back of the shelf. This kit contains: bracket flextube 1 flextube clamp 2 strength member fixation devices mounting screws tie wraps ETSI mounting brackets for 19 (88 mm) shelf FISTMB22HUM ETSI mounting bracket to mount a 19 shelf between ETSI mounting profiles. DCP03891.JPG Asymmetrical ETSI mounting brackets for 19 (88 mm) shelf FISTMB22HUMAS ETSI mounting brackets to mount a 19 shelf (88 mm high) asymmetrically between ETSI mounting profiles (to gain space at one side of the shelf).

20 FISTGPS2 (& FISTGPST12) Page 20 of Flexible tubing FISTGSFLEX m of flextube (internal 12 mm) to route and group tubes from a cable attachment plate to the shelves when no side or back termination plate is used. RA11.JPG Identification cards and card holders FISTGPS22HUID10 10 identification cards and card holders. For detailed layout, see Addendum 2. 7N3K6461.JPG Accessories for the 44 mm high version Cable termination back FISTCT1HUB1 Cable termination unit back, to terminate 1 cable at the back of the shelf. This kit contains: flextube 1 strength member fixation device tie wraps DSC00006.JPG ETSI mounting brackets for 19 (44 mm) shelf FISTMB21HUM ETSI mounting bracket to mount a 19 shelf between ETSI mounting profiles. Flexible tubing FISTGSFLEX1050S m of flextube (internal 10 mm) to route and group tubes from a cable attachment plate to the shelves when no side or back termination plate is used. RA11.JPG Identification cards and card holders FISTGPS21HUID10 10 identification cards. For detailed layout, see Addendum 3. 7N3K6460.JPG

21 FISTGPS2 (& FISTGPST12) Page 21 of Ribbon cable termination accessories Ribbon loose tube cable termination kit FISTGRCTB100 Cable termination kit for max. 2 ribbon loose tube cable. Can be mounted next to the shelf. Up to 6 tubes of R12. Strength member fixation compatible with most types of strength members (1.55 mm Ø). GCO2OG14.JPG Central core cable termination kit FISTGRCTB100CC Cable termination kit for max. 2 central core cables. Can be mounted next to the shelf. Strength member fixation (till 2.5 mm Ø). GCO2OG15.JPG Tube divider to mount in rack side duct FISTGRTD5MM Tube divider to be placed in the side duct of a rack. 5 tubes 5mm in 5 tubes 5 mm out can be used to spread (ribbon) fibers over several tubes. 7N3K1585.JPG Tube divider to mount in shelf FISTGPS2TD5MM Tube divider to be placed behind the hinge of a GPS2 shelf. Typical application: 1 tube in (6 R12) 6 tubes out (each 1 R12). A bend control on the cover protects the jumpers leaving the shelf. Can be placed in GPS2 chassis types M, I (3 HU) and J (2 HU) only. 7N3K1586.JPG 5 mm tubing FISTTUBE5MM30 30 m of 5 mm tubing to route ribbon fibers between the tube dividers and the trays. I&C003.JPG

22 FISTGPS2 (& FISTGPST12) Page 22 of Tools & miscellaneous Group termination unit FISTGTU2 This kit contains 18 group termination units. In case not preconnectorized breakout cable has to be spliced to pigtails, a GTU is used to attach the pigtail kevlar per group of 4 pigtails at the entrance of the splicing area of the tray. DSC00099.JPG Velcro roll FISTVE Velcro to segment or secure pigtails. Supplied on a roll 25 m long (width 25 mm) to be cut to length as required. FRWR044.JPG Allen key FACCALLENKEY5350 Allen key, diameter 5 mm, length 350 mm for backmounting of shelves in rack. TO04.JPG Cage nut tool FACCCAGENUTTOOL Tool to install cage nuts in the rack. TO23.JPG

23 FISTGPS2 (& FISTGPST12) Page 23 of Addendum 1: identification card layout for the 125 mm high shelf

24 FISTGPS2 (& FISTGPST12) Page 24 of Addendum 2: identification card layout for the 88 mm high shelf Addendum 3: identification card layout for the 44 mm high shelf Tyco Electronics Raychem NV Telecom Outside Plant Diestsesteenweg 692 B3010 KesselLo, Belgium All of this information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. Tyco and FIST are trademarks. Copyright Tyco Electronics 1999