TYPES SN7406, SN7416, SN5406, SN5416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS

SN54ALS20A, SN54AS20, SN74ALS20A, SN74AS20 DUAL 4-INPUT POSITIVE-NAND GATES

Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs description These devices contain two independent -input positive-nand

SN54F38, SN74F38 QUADRUPLE 2-INPUT POSITIVE-NAND BUFFERS WITH OPEN-COLLECTOR OUTPUTS

SNF, SN7F SDFS0A MARCH 7 REVISED OCTOBER Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 00-mil DIPs description These devices contain four

SN54ALS04B, SN54AS04, SN74ALS04B, SN74AS04 HEX INVERTERS

SNLS0B, SNS0, SN7LS0B, SN7S0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain

SN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS

SNBCT0, SNBCT0 SCBS0B JULY REVISED NOVEMBER Open-Collector Version of BCT Open-Collector Outputs Drive Bus Lines or Buffer Memory Address Registers ESD Protection Exceeds 000 V Per MIL-STD-C Method 0 Packages

SN54ALS04B, SN54AS04, SN74ALS04B, SN74AS04 HEX INVERTERS

SNALS0B, SNAS0, SN7ALS0B, SN7AS0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain

SN54ALS32, SN54AS32, SN74ALS32, SN74AS32 QUADRUPLE 2-INPUT POSITIVE-OR GATES

Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent -input positive-or

MC1488, SN55188, SN75188 QUADRUPLE LINE DRIVERS

Meet or Exceed the Requirements of ANSI EIA/ TIA--E and ITU Recommendation V. Designed to Be Interchangeable With Motorola MC1 Current-Limited Output: ma Typical Power-Off Output Impedance: Ω Minimum Slew

CD4010C Hex Buffers (Non-Inverting)

Hex Buffers (Non-Inverting) General Description The CD4010C hex buffers are monolithic complementary MOS (CMOS) integrated circuits. The N- and P-channel enhancement mode transistors provide a symmetrical

SN54ALS645A, SN54AS645, SN74ALS645A, SN74AS645 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

Bidirectional Bus Traceivers in High-Deity 0-Pin Packages True Logic 3-State Outputs Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and

~ > TEXAS~ SN5427, SN54LS27, SN7427, SN74LS27 TRIPLE 3-INPUT POSITIVE-NOR GATES. Vee INSTRUMENTS POST OFOICE BOX OALLAS.

SDLS089 Package Options Include Plastic "Small Outline" Packages, Ceramic Chip Carriers and Flat Packages, and Plastic and Ceramic DIPs Dependable Texas Instruments Quality and Reliability description

SN54ALS880A, SN54AS880, SN74ALS880A, SN74AS880 DUAL 4-BIT D-TYPE LATCHES WITH 3-STATE OUTPUTS

N54AL880A, N54A880, N74AL880A, N74A880 DUAL 4-BIT D-TYPE LATCHE WITH 3-TATE OUTPUT DA079A D21, DECEMBER 1982 REVIED MAY 198 3-tate Buffer-Type Outputs Drive Bus Lines Directly Bus-tructured Pinout AL873B

SN54LVTH16240, SN74LVTH V ABT 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

Members of the Texas Instruments Widebus Family State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation Support Mixed-Mode Signal Operation (5-V Input

DS3668 Quad Fault Protected Peripheral Driver

Quad Fault Protected Peripheral Driver General Description The DS3668 quad peripheral driver is designed for those applications where low operating power, high breakdown voltage, high output current and

SN54ALS573C, SN54AS573A, SN74ALS573C, SN74AS573A OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS

-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout True Logic Outputs Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), Standard Plastic (N)

FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTERS

Integrated Device Technology, Inc. FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTERS IDT54/74FCT161/A/C IDT54/74FCT163/A/C FEATURES: IDT54/74FCT161/163 equivalent to FAST speed IDT54/74FCT161A/163A 35%

CD4023BC Buffered Triple 3-Input NAND Gate

CD4023BC Buffered Triple 3-Input NAND Gate General Description These triple gates are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P- channel enhancement mode transistors.

74AC11139 DUAL 2-LINE DECODER/DEMULTIPLEXER

Designed Specifically for High-Speed Memory Decoders and Data Tramission Systems Incorporates Two Enable Inputs to Simplify Cascading and/or Data Reception Center-Pin V CC and GND Configuratio Minimize

SN54ALS74A, SN54AS74, SN74ALS74A, SN74AS74 DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS WITH CLEAR AND PRESET

SNALS7A, SNAS7, SN7ALS7A, SN7AS7 SDASA D, APRIL 9 REVISED SEPTEMBER 97 Package Optio Include Plastic Small Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 00-mil DIPs Dependable

1-megabit (64K x 16) 5-volt Only Flash Memory AT49F1024A Features Description Pin Configurations

BDTIC www.bdtic.com/atmel Features Single-voltage Operation 5V Read 5V Reprogramming Fast Read Access Time 45 ns Internal Program Control and Timer 8K Word Boot Block with Lockout Fast Erase Cycle Time

TF10CP02 / TF10CP Gbps 2x2 LVDS Crosspoint Switches. Features. Description. Applications. Function Diagram. Ordering Information.

Features DC to 1.5 Gbps low jitter, low skew, low power operation Pin configurable, fully differential, non-blocking architecture eases system design and PCB layout On-chip 100W input termination minimizes

TF90LVDS047-6CG. Quad LVDS Line Driver with Flow-Through Pinout. Description. Features. Applications. Function Diagram. Ordering Information

Features Companion driver to Quad Extended Common Mode LVDS Receiver TF0LVDS048 DC to 400 Mbps / 200 MHz low noise, low skew, low power operation t 350 ps (max) channel-to-channel skew t 250 ps (max) pulse

74AC11240 OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS

Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and Configuratio Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS) -m Process 500-mA Typical Latch-Up Immunity

1-Megabit (128K x 8) Low Voltage Paged Parallel EEPROMs AT28LV010

BDTIC www.bdtic.com/atmel Features Single 3.3V ± 10% Supply Fast Read Access Time 200 ns Automatic Page Write Operation Internal Address and Data Latches for 128 Bytes Internal Control Timer Fast Write

SN74ALS533A, SN74AS533A OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS SDAS270 DECEMBER 1994

Eight Latches in a Single Package -State Bus-Driving Inverting Outputs Full Parallel Access for Loading Buffered Control Inputs pnp Inputs Reduce dc Loading on Data Lines Package Optio Include Plastic

1-Megabit (128K x 8) 5-volt Only Flash Memory AT29C010A. Features. Description. Pin Configurations

Features Fast Read Access Time - 70 ns 5-Volt Only Reprogramming Sector Program Operation Single Cycle Reprogram (Erase and Program) 1024 Sectors (128 bytes/sector) Internal Address and Data Latches for

74F00 Quad 2-Input NAND Gate

Quad 2-Input NAND Gate General Description This device contains four independent gates, each of which performs the logic NAND function. Ordering Code: December 1994 Revised September 2000 Order Number

IDT54/74FCT244/A/C FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES: OEA OEB DA1 OA1 DB1 OB1 DA2 OA2 OB2 DB2 DA3 OA3

FAST CMOS OCTAL BUFFER/LINE DRIVER IDT/7FCT/A/C FEATURES: IDT/7FCTA equivalent to FAST speed and drive IDT/7FCTA % faster than FAST IDT/7FCTC up to % faster than FAST IOL = ma (commercial) and 8mA (military)

IDT54/74FCT541/A/C FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM

FAST CMOS OCTAL BUFFER/LINE DRIVER IDT/7FCT/A/C FEATURES: IDT/7FCT equivalent to FAST speed and drive IDT/7FCTA % faster than FAST IDT/7FCTC up to % faster than FAST IOL = ma (commercial) and 8mA (military)

ICE27C Megabit(128KX8) OTP EPROM

1- Megabit(128KX8) OTP EPROM Description The is a low-power, high-performance 1M(1,048,576) bit one-time programmable read only memory (OTP EPROM) organized as 128K by 8 bits. It is single 5V power supply

74LVT244 74LVTH244 Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs

Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs General Description The LVT244 and LVTH244 are octal buffers and line drivers designed to be employed as memory address drivers, clock drivers

AT24C01A/02/04/08/16. 2-Wire Serial CMOS E 2 PROM. Features. Description. Pin Configurations. 1K (128 x 8) 2K (256 x 8) 4K (512 x 8) 8K (1024 x 8)

AT24C01A/02/04/08/16 Features Low Voltage and Standard Voltage Operation 5.0 (V CC = 4.5V to 5.5V) 2.7 (V CC = 2.7V to 5.5V) 2.5 (V CC = 2.5V to 5.5V) 1.8 (V CC = 1.8V to 5.5V) Internally Organized 128

PAL22V10 Family, AmPAL22V10/A

FINAL COM L: -7//5 PAL22V Family, AmPAL22V/A 24-Pin TTL Versatile PAL Device Advanced Micro Devices DISTINCTIVE CHARACTERISTICS As fast as 7.5-ns propagation delay and 9 MHz fmax (external) Macrocells

4-Megabit (512K x 8) 5-volt Only CMOS Flash Memory AT49F040 AT49F040T AT49F040/040T AT49F040/040T. Features. Description. Pin Configurations

Features Single Voltage Operation 5V Read 5V Reprogramming Fast Read Access Time - 70 ns Internal Program Control and Timer 16K bytes Boot Block With Lockout Fast Erase Cycle Time - 10 seconds Byte By

AT29C K (32K x 8) 5-volt Only CMOS Flash Memory. Features. Description. Pin Configurations

Features Fast Read Access Time - 70 ns 5-Volt-Only Reprogramming Page Program Operation Single Cycle Reprogram (Erase and Program) Internal Address and Data Latches for 64-Bytes Internal Program Control

UM3222E,UM3232E. High ESD-Protected, Low Power, 3.3V to 5.5V, True RS-232 Transceivers. General Description. Applications.

UM3222E,UM3232E High ESD-Protected, Low Power, 3.3V to 5.5V, True RS-232 Transceivers General Description The UM3222E/UM3232E are dual driver, dual receiver RS-232 transceiver solutions intended for portable

TIL311 HEXADECIMAL DISPLAY WITH LOGIC

SOLID-STATE HEXADECIMAL DISPLAY WITH INTEGRAL TTL CIRCUIT TO ACCEPT, STORE, AND DISPLAY -BIT BINARY DATA 7,6-mm (0.300-Inch) Character Height High Brightness Internal TTL MSI Chip With Latch, Decoder,

MM74HCU04 Hex Inverter

MM74HCU04 Hex Inverter Features Typical propagation delay: 7ns Fanout of 15 LS-TTL loads Quiescent power consumption: 10µA maximum at room temperature Low input current: 1µA maximum General Description

0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information

4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making

DatasheetArchive.com. Request For Quotation

atasheetarchive.com Request For uotation Order the parts you need from our real-time inventory database. Simply complete a request for quotation form with your part information and a sales representative

SRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information

Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally

±15kV ESD-Protected, Single/Dual/Octal, CMOS Switch Debouncers

19-477; Rev 1; 1/99 ±15k ESD-Protected, Single/Dual/Octal, General Description The are single, dual, and octal switch debouncers that provide clean interfacing of mechanical switches to digital systems.

74VCX00 Low Voltage Quad 2-Input NAND Gate with 3.6V Tolerant Inputs and Outputs

74CX00 Low oltage Quad 2-Input NAND Gate with 3.6 Tolerant Inputs and Outputs General Description The CX00 contains four 2-input NAND gates. This product is designed for low voltage (1.65 to 3.6) CC applications

IDTQS3257 QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD 2:1 MUX/DEMUX DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES: APPLICATIONS:

HIGH-SPEED CMOS QUICKSWITCH QUAD :1 MUX/DEMUX FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible with the 7F57, 7FCT57, and

AT28C16. 16K (2K x 8) CMOS E 2 PROM. Features. Description. Pin Configurations

Features Fast Read Access Time - 150 ns Fast Byte Write - 200 µs or 1 ms Self-Timed Byte Write Cycle Internal Address and Data Latches Internal Control Timer Automatic Clear Before Write Direct Microprocessor

Type Version Ordering Code Package PEB 2025-N V 1.5 Q67100-H6300 P-LCC-28-R (SMD) PEB 2025-P V 1.5 Q67100-H6241 P-DIP-22

ISDN Exchange Power Controller (IEPC) PEB 2025 CMOS IC Features Supplies power to up to four transmission lines CCITT recommendations compatible for power feed at the S interface Each line is individually

74VHC14 Hex Schmitt Inverter

74VHC14 Hex Schmitt Inverter General Description June 1993 Revised April 1999 The VHC14 is an advanced high speed CMOS Hex Schmitt Inverter fabricated with silicon gate CMOS technology. It achieves the

IDT74FST BIT 2:1 MUX/DEMUX SWITCH

16-BIT 2:1 MUX/DEMUX SWITCH IDT74FST163233 FEATURES: Bus switches provide zero delay paths Low switch on-resistance TTL-compatible input and output levels ESD > 200 per MIL-STD-883, Method 3015; > 20 using

PI3B3253. Description. Features. Pin Configuration (QSOP, TSSOP) Block Diagram. Pin Configuration (UQFN) Truth Table (1)

3.3V, Dual 4:1 Mux/DeMux NanoSwitch Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Fast Switching Speed: 5.2ns max. Ultra Low Quiescent Power (0.2µA typical) Ideally suited

Low Voltage 1.65 V to 3.6 V, Bidirectional Logic Level Translation, Bypass Switch ADG3233

Data Sheet Low Voltage. V to. V, Bidirectional Logic Level Translation, Bypass Switch ADG FEATURES Operates from. V to. V supply rails Bidirectional level translation, unidirectional signal path -lead

3.3V CMOS 1-TO-5 CLOCK DRIVER

3. CMOS 1-TO-5 CLOCK DRIVER 3. CMOS 1-TO-5 CLOCK DRIVER IDT74FCT38075 FEATURES: Advanced CMOS Technology Guaranteed low skew < 100ps (max.) Very low duty cycle distortion< 250ps (max.) High speed propagation

16-megabit 2.5-volt or 2.7-volt DataFlash AT45DB161D

Features Single 2.5V - 3.6V or 2.7V - 3.6V Supply RapidS Serial Interface: 66 MHz Maximum Clock Frequency SPI Compatible Modes 0 and 3 User Configurable Page Size 512 Bytes per Page 528 Bytes per Page

2-Megabit (256K x 8) 5-volt Only CMOS Flash Memory AT29C020. Features. Description. Pin Configurations

Features Fast Read Access Time - 90 ns 5-Volt-Only Reprogramming Sector Program Operation Single Cycle Reprogram (Erase and Program) 1024 Sectors (256 bytes/sector) Internal Address and Data Latches for

Applications +5V V CC V S EN SYNCH0, SYNCV0 SDA0, SCL0 RED SYNCH1, SYNCV1 SDA1, SCL1 MAX14895E BLU GND

19-5819; Rev ; 3/11 E V A L U A T I O N K I T A V A I L A B L E MAX14895E General Description The MAX14895E integrates level-translating buffers and features RED, GRN, and BLU (RGB) port protection for

3.3V ZERO DELAY CLOCK BUFFER

3.3V ZERO DELAY CLOCK BUFFER IDT2309A FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 133MHz operating frequency Distributes one clock input to one bank of five and one bank of four outputs Separate

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT IDTQS361 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs

3.3 Volt CMOS Bus Interface 8-Bit Latches

Q 3.3 Volt CMOS Bus Interface 8-Bit Latches QS74FCT3373 QS74FCT32373 FEATURES/BENEFITS Pin and function compatible to the 74F373 JEDEC spec compatible 74LVT373 and 74FCT373T IOL = 24 ma Com. Available

8-megabit 2.5-volt or 2.7-volt DataFlash AT45DB081D

Features Single 2.5V or 2.7V to 3.6V Supply RapidS Serial Interface: 66 MHz Maximum Clock Frequency SPI Compatible Modes 0 and 3 User Configurable Page Size 256 Bytes per Page 264 Bytes per Page Page Size

MC74C Digit BCD Display Controller/Driver. General Description. Ordering Code: Connection Diagram. Features. Version 1.0

6-Digit BCD Display Controller/Driver General Description The display controllers are interface elements, with memory, that drive a 6-digit, 8-segment LED display. The display controllers receive data

FAST CMOS OCTAL BUFFER/LINE DRIVER

FAST CMOS OCTAL BUFFER/LINE DRIVER IDT54/74FCT244T/AT/CT FEATURES: Std., A, and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.)

A23W8308. Document Title 262,144 X 8 BIT CMOS MASK ROM. Revision History. Rev. No. History Issue Date Remark

Preliminary 262,144 X 8 BIT CMOS MASK ROM Document Title 262,144 X 8 BIT CMOS MASK ROM Revision History Rev. No. History Issue Date Remark 0.0 Initial issue November 11, 1999 Preliminary PRELIMINARY (November,

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH IDTQS338 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Zero propagation delay,

IP4770/71/72CZ Applications. 4. Ordering information. Functional diagram. NXP Semiconductors. VGA/video interface with ESD protection

VGA/video interface with integrated buffers, ESD protection and integrated termination resistors Rev. 01 25 October 2006 Product data sheet 1. General description 2. Features The IP4770CZ16, IP4771CZ16,

VGA Port Companion Circuit

GA Port Companion Circuit Features Single chip solution for the GA port interface Includes ESD protection, level shifting, and RGB termination Seven channels of ESD protection for all GA port connector

Craft Port Tiny RS-232 Transceiver for Portable Applications ADM101E. Data Sheet FUNCTIONAL BLOCK DIAGRAM

Data Sheet FEATURES 460 kbit/s Transmission Rate Single 5 V Power Supply Compatible with RS-232 Input/Output Levels 0.1 μf Charge Pump Capacitors One Driver and One Receiver On-Board DC-DC Converter ±4.2

FAST CMOS OCTAL BUFFER/LINE DRIVER

FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT240A/C FEATURES: IDT74FCT240A 25% faster than FAST IDT74FCT240C up to 55% faster than FAST 64mA IOL CMOS power levels (1mW typ. static) Meets or exceeds JEDEC

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH IDTQS32X245 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Dual

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD 2:1 MUX/DEMUX

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD :1 MUX/DEMUX IDTQS357 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible

1000 Base-T, ±15kV ESD Protection LAN Switch

19-0841; Rev 0; 6/07 1000 Base-T, ±15kV ESD Protection LAN Switch General Description The meets the needs of high-speed differential switching, including that of Gigabit Ethernet (10/100/1000) Base-T switching

74VHC132 Quad 2-Input NAND Schmitt Trigger

74VHC132 Quad 2-Input NAND Schmitt Trigger General Description The VHC132 is an advanced high speed CMOS 2-input NAND Schmitt Trigger Gate fabricated with silicon gate CMOS technology. It achieves the

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH IDTQS32X2245 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Dual '245 function 25Ω resistor for low noise Low propagation

PESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information

4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES

QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES IDTQS315 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Pin compatible with the 74 15 function

CAT22C Bit Nonvolatile CMOS Static RAM

256-Bit Nonvolatile CMOS Static RAM FEATURES Single 5V Supply Fast RAM Access Times: 200ns 300ns Infinite E 2 PROM to RAM Recall CMOS and TTL Compatible I/O Power Up/Down Protection 100,000 Program/Erase

USB1T1102 Universal Serial Bus Peripheral Transceiver with Voltage Regulator

Universal Serial Bus Peripheral Transceiver with Voltage Regulator General Description This chip provides a USB Transceiver functionality with a voltage regulator that is compliant to USB Specification

PY291A DESCRIPTION. Windowed devices for reprogramming. EPROM Technology for reprogramming. Fully TTL Compatible Inputs and Outputs

2K x 8 reprogrammable prom FEATURES EPROM Technology for reprogramming High Speed 20/25/35/50 ns (Commercial) 25/35/50 ns (Industrial) 35/50 ns (Military) Low Power Operation: 660 mw Single 5±10% Power

Is Now Part of To learn more about ON Semiconductor, please visit our website at

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC

0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information

4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making

Distributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. SOLID-STATE HEXADECIMAL DISPLAY WITH INTEGRAL TTL CIRCUIT TO ACCEPT, STORE,

AT28C K (32K x 8) Paged CMOS E 2 PROM. Features. Description. Pin Configurations

AT28C256 Features Fast Read Access Time - 150 ns Automatic Page Write Operation Internal Address and Data Latches for 64-Bytes Internal Control Timer Fast Write Cycle Times Page Write Cycle Time: 3 ms

4-megabit (512K x 8) Single 2.7-volt Battery-Voltage Flash Memory AT49BV040 AT49BV040T AT49LV040 AT49LV040T

Features Single Voltage for Read and Write: 2.7V to 3.6V (BV), 3.0V to 3.6V (LV) Fast Read Access Time 70 ns Internal Program Control and Timer 16K Bytes Boot Block with Lockout Fast Chip Erase Cycle Time

Quad GTL/GTL+ to LVTTL/TTL bidirectional non-latched translator

Quad GTL/GTL+ to LVTTL/TTL bidirectional non-latched translator Rev. 07 3 February 2009 Product data sheet 1. General description The is a quad translating transceiver designed for 3.3 V system interface

SN54LVTH16374, SN74LVTH V ABT 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

Members of the Texas Instruments Widebus Family State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation Support Mixed-Mode Signal Operation (5-V Input

AT49BV004(T) TSOP Top View Type 1 1. AT49BV4096A(T) TSOP Top View Type 1 A16 BYTE GND I/O7 I/O14 I/O6 I/O13 I/O5 I/O12 I/O4 VCC I/O11 I/O3 I/O10 I/O2

Features 2.7V to 3.6V Read/Write Operation Fast Read Access Time - 120 ns Internal Erase/Program Control Sector Architecture One 8K Words (16K bytes) Boot Block with Programming Lockout Two 4K Words (8K

TD62382AP,TD62382AF TD62382AP/AF 8CH LOW INPUT ACTIVE SINK DRIVER FEATURES PIN CONNECTION (TOP VIEW) SCHEMATICS (EACH DRIVER)

TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62382AP,TD62382AF TD62382AP/AF 8CH LOW INPUT ACTIVE SINK DRIVER The TD62382AP / AF are non inverting transistor array which are comprised

Low Voltage 1.65 V to 3.6 V, Bidirectional Logic Level Translation, Bypass Switch ADG3233

Low Voltage. V to. V, Bidirectional Logic Level Translation, Bypass Switch FEATURES Operates from. V to. V supply rails Bidirectional level translation, unidirectional signal path -lead SOT- and MSOP packages

MX27C K-BIT [32K x 8] CMOS EPROM FEATURES GENERAL DESCRIPTION BLOCK DIAGRAM PIN CONFIGURATIONS PIN DESCRIPTION

FEATURES 32K x 8 organization Single +5V power supply +125V programming voltage Fast access time: 45/55/70/90/100/120/150 ns Totally static operation Completely TTL compatible 256K-BIT [32K x 8] CMOS EPROM

UNISONIC TECHNOLOGIES CO., LTD

UNINIC TECHNOLOGIES CO., LTD 20-BIT SERIAL TO PARALLEL CONVERTER DESCRIPTION The UTC LS3718 is a 20-bit serial to parallel converter utilizing CMOS Technology. It is incorporates control circuit, shift

3.3V CMOS BUFFER/CLOCK DRIVER

3. CMOS BUFFER/CLOCK DRIVER 3. CMOS BUFFER/CLOCK DRIVER IDT49FCT380/A FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 1.0ns (max.) Very low CMOS power

SP1050 Series for Power-over-Ethernet PSE Protection

SP1050 Series for Power-over-Ethernet PSE Protection RoHS Pb GREEN Description The SP1050-04BTG provides over-voltage protection for Power-over-Ethernet PSE equipment in a space saving SOIC-8 package.

MM74HC132 Quad 2-Input NAND Schmitt Trigger

MM74HC132 Quad 2-Input NAND Schmitt Trigger Features Typical propagation delay: 12ns Wide power supply range: 2V 6V Low quiescent current: 20µA maximum (74HC Series) Low input current: 1µA maximum Fanout

3.3V CMOS OCTAL BIDIRECTIONAL TRANSCEIVER

. CMOS OCTAL IDIRECTIONAL TRANSCEIVER. CMOS OCTAL IDIRECTIONAL TRANSCEIVER IDT7FCT/A FEATURES: 0. MICRON CMOS Technology ESD > 00 per MIL-STD-, Method 0; > 0 using machine model (C = 00pF, R = 0) VCC =.

ATF20V8B. High Performance Flash PLD. Features. Block Diagram. Pin Configurations

Features Industry Standard Architecture Emulates Many 24-Pin PALs Low Cost Easy-to-Use Software Tools High Speed Electrically Erasable Programmable Logic Devices 7.5 ns Maximum Pin-to-Pin Delay Several

FST3257 Quad 2:1 Multiplexer / Demultiplexer Bus Switch

FST3257 Quad 2:1 Multiplexer / Demultiplexer Bus Switch Features 4Ω Switch Connection Between Two Ports Minimal Propagation Delay Through the Switch Low I CC Zero Bounce in Flow-Through Node Control Inputs

HT Sound Generator

6-Sound Generator Features Single power supply: 2.4V~4.5V Low standby current: 1µA (Typ.) at V DD=3V Auto power-off function Six different sound sections K1 to K6 independently chosen or as a cascade control

description VCC 1PRE 1OC 1D1 1C 1Q1 1Q2 1Q3 1Q4 2Q1 2Q2 2Q3 2Q4 2C 2PRE 1D2 1D3 1D4 2D1 2D2 2D3 2D4 2OC GND 1PRE 1OC 1Q1 1D1 1Q2 1Q3 1Q4 1D2 1D3 1D4

3-tate Buffer-Type Outputs Drive Bus Lines Directly Bus-tructured Pinout AL873B is Alternative Version With Noninverting Outputs Package Optio Include Plastic mall Outline Packages, Both Plastic and Ceramic

1000 Base-T, ±15kV ESD Protection LAN Switches

19-0624; Rev 0; 8/06 1000 Base-T, ±15kV ESD Protection LAN Switches General Description The meet the needs of high-speed differential switching. The devices handle the needs of Gigabit Ethernet (10/100/1000)

REVISIONS LTR DESCRIPTION DATE APPROVED. A Correct terminal connections in figure 2. - PHN Thomas M. Hess

REVISIONS LTR DESCRIPTION DTE PPROVED Correct terminal connections in figure 2. - PHN 13-01-16 Thomas M. Hess CURRENT DESIGN CTIVITY CGE CODE HS CHNGED NMES TO: DL LND ND MRITIME 43218-3990 Prepared in

3.3V CMOS HEX BUFFER/DRIVER WITH OPEN-DRAIN OUTPUTS AND 5 VOLT TOLERANT I/O

3.3V CMOS HEX BUFFER/DRIVER WITH OPEN-DRAIN S AND 5 T TOLERANT I/O IDT74LVC07A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0) VCC

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SGU04FU IN A GND

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SGU04FU Inverter (Unbuffered) Features High output current : ±8 ma (min) at = 3 Super high speed operation : t pd = 1.9 ns (typ.) at = 3.3,

Rev. No. History Issue Date Remark

Preliminary 512K X 8 OTP CMOS EPROM Document Title 512K X 8 OTP CMOS EPROM Revision History Rev. No. History Issue Date Remark 0.0 Initial issue June 17, 1998 Preliminary 1.0 Change CE from VIL to VIH