M-Series General Specifications

Transcription

1 arling Series General Specifications The low cost Series utilizes the hydraulic magnetic principle which provides accurate and reliable circuit protection even when exposed to extremely hot and/or cold application environments. Available in a choice of rocker actuator styles and colors, push button, pushpull, paddle, and baton style handle actuators, the VisiRocker twocolor actuators as well as nonilluminated or illuminated rocker versions with LED or neon bulbs. The exclusive Rockerguard bezel helps prevent inadvertent actuation. "Wiping" contact design insures long term reliability. Various styling options allow design flexibility. Typical applications would include power supplies, medical equipment, and telecommunications equipment. Agency ertifications UL Recognized UL Standard 077 omponent Recognition Program as Protectors, Supplementary (/Guide QVU, File E75596) SA ertified omponent Supplementary Protector under lass 35 30, FIle SA Standard. o. 35 UL Listed UL Standard 489A ircuit Breakers, ommunications Equipment (/Guide DITT, File E8995) VDE ertified TUV ertified E60934, VDE 064 under File o E60934 under License o. E Electrical Table A: Lists UL Recognized & SA ertified configurations & performance capabilities as a omponent Supplementary Protector. SERIES TABLE A: OPOET SUPPLEETARY PROTET VOLTAGE URRET RATIG ITERRUPTIG APAITY (APS) FULL GEERAL UL / SA IRUIT AX PURPOSE POLES WITH WITHOUT OFIGURATIO RATIG FREQUEY PHASE APS APS BREAKIG BAKUP FUSE BAKUP FUSE 3 D D D ,3 D SERIES 80 D / / / / otes for Tables A : Requires Branch ircuit backup with a UL Listed type K5 or Type RK5 Fuse rated 60 Amps maximum. Polarity Sensitive. 3 Available only with special catalog number. onsult factory. 8

2 arling Series General Specifications Electrical Table B: Lists UL Recognized and SA, VDE & TUV ertified configurations & performance capabilities as a omponent Supplementary Protector. SERIES TABLE B: OPOET SUPPLEETARY PROTET VOLTAGE URRET RATIG ITERRUPTIG APAITY (APS) FULL GEERAL UL / SA VDE / TUV IRUIT AX PURPOSE POLES WITH WITHOUT WITH WITHOUT OFIGURATIO RATIG FREQUEY PHASE APS APS BREAKIG BAKUP FUSE BAKUP FUSE BAKUP FUSE BAKUP FUSE 3 D D D SERIES 3 80 D / / / otes for Table B: Requires Branch ircuit backup with a UL Listed type K5 or Type RK5 Fuse rated 60 Amps maximum. Requires backup protection with a thermal magnetic circuit breaker rated 6 Amps and having a Type trip characteristic per E60898/DIVDE 064 (6A). 3 Polarity Sensitive. 4 Available only with special catalog number. onsult factory. 5 TUV only. Table : Lists UL489A Listed & TUV ertified configurations & performance capabilities for use in ommunications Equipment. SERIES TABLE : UL489A (OUIATIOS EQUIPET POLARITY SESITIVE) VOLTAGE URRET RATIG GEERAL ITERRUPTIG APAITY (APS) WITHOUT IRUIT AX PURPOSE POLES BAKUP FUSE OFIGURATIO RATIG FREQUEY APS BREAKIG UL489A TUV 80 D SERIES 65 D D otes for Table : Available only with Special atalog umber. 9

3 arling Series General Specifications Electrical echanical aximum Voltage 5/50 VA 50/60 Hz, 80 VD (See Rating Tables.) urrent Ratings Standard current coils: 0.00, 0.50, 0.500, 0.750,.00 thru 5.0 in amp increments, 8.0, 0.0, 5.0, Other ratings available see Ordering Scheme. Auxiliary Switch Rating SPDT; 7A 50VA, 7A (Res) 8VD, 4A (Ind.) 8VD, 0.5A 80VD (Res) (silver contacts), 0.A 5VA (gold contacts). Insulation Resistance inimum of 00 egohms at 500 VD. Dielectric Strength UL, SA 500V, 50/60 Hz for one minute between all electrically isolated terminals. Series ircuit Breakers comply with the 8mm spacing and 3750 V 50/60Hz dielectric requirements from hazardous voltage to operator accessible surfaces, per Publications IE 380, 435, 950, E and VDE Resistance, Impedance Values from Line to Load Terminal based on Series Trip ircuit Breaker. RESISTAE, IPEDAE VALUES from Line to Load Terminals (Values Based on Series Trip ircuit Breaker) O H S APERE RATIG Pulse Tolerance urves ultiple of Rated urrent 8x x I r 60 Hz / ycle Inrush Pulse Tolerance Time Delay urves 6, 64, 9 & 94 Time Delay urves, 4, 3 & 34 t 6.67 Time in illiseconds ultiple of Rated urrent 6x 0x I r URRET (APS) Hz / ycle Inrush Pulse Tolerance TOLERAE (%) ± 5% ± 35% Time Delay urves 6, 64, 9 & 94 Time Delay urves, 4, 3 & Time in illiseconds t Endurance Trip Free Trip Indication Physical 0,000 OOFF 6 per minute with rated urrent and Voltage. All Series ircuit Breakers will trip on overload, even when actuator is forcibly held in the O position. The actuator moves positively to the OFF position when an overload causes the circuit breaker to trip. umber of Poles or Internal ircuit onfigurations Series with or without Auxiliary Switch. Switch Only with or without Auxiliary Switch. Weight Approximately 30 grams/pole (Approximately.07 ounces/pole) Standard olors See Ordering Scheme. Environmental Designed and tested in accordance with requirements of specification ILPRF5569 & ILSTD0 as follows: Shock Withstands 00 Gs, 6ms, sawtooth while carrying rated current per ethod 3, ond. I. Instantaneous curves tested at 80% of rated current. Vibration Withstands 0.060" excursion from 0 55 Hz, and 0 Gs Hz, at rated current per ethod 04, Test ondition A. Instantaneous curves tested at 80% of rated current. oisture Resistance ethod 06D, i.e., ten 4hour + 5 to +65, 8098% RH. Salt Spray ethod 0, ondition A (9095% 5% al Solution, 96 hrs). Thermal Shock ethod 07D, ondition A (Five 55 to +5 to +85 to +5 ). Operating Temperature 40 to +85 hemical Resistance Only the outside surfaces of the case and the handles may be cleaned with detergents or alcohol. Organic (hydrocarbon based) solvents are not recommended because they attack plastics. aution should be taken when solvents are used to clean and remove flux from terminals. Lubricants should not be introduced into the handle/bushing openings. 0

4 arling Series Handle/Push Button UL Recognized Ordering Scheme Series B B B 3 Poles 4 ircuit 5 Frequency & Delay 6 urrent Rating 7 Terminal 8 olor 9 0 Front Panel Legend Hardware Plate B Bushing olor Agency Approval SERIES ATUAT Handle Paddle Baton AP Push Button ATUAT T PushPull U Push To Reset Push Button w/ SnapIn ounting V PushPull W Push To Reset 3 POLES One Two 6 URRET RATIG (APERES) IRUIT without Auxiliary Switch A Switch Only (o oil), aintained ontacts B Series Trip (urrent) with Auxiliary Switch, Silver ontacts Terminal Type: P 3 Switch Only, aintained ontacts.060 Dia, Round Solder Turret Q 3, 4 Switch Only, aintained ontacts.058 Dia, Round Q.. S 3 Series Trip (urrent).060 Dia, Round Solder Turret T 3, 4 Series Trip (urrent).058 Dia, Round Q.. with Auxiliary Switch, Gold ontacts 3, 4 Switch Only, aintained ontacts.058 Dia, Round Q Series Trip (urrent).058 Dia, Round Solder Turret 7 TERIAL 8 PushOn 0.50 Tab (Q..) 0 Screw 83 w/upturned lugs 3 0 Screw 83 (Bus Type) 8 ATUAT OL 5 Handle PushButton olor A White B Black 3 Red 4 D Green 5 E Blue 6 F Yellow 8 H Orange 4 0 Screw 83 (Backconnected) A PushIn Stud 5 FREQUEY & DELAY 03 D 50/60Hz, Switch Only 0 D Instantaneous D Short 4 D edium 0 50/60Hz Instantaneous 50/60Hz Short 4 50/60Hz edium 30 D, 50/60Hz Instantaneous 3 D, 50/60Hz Short 34 D, 50/60Hz edium 6 50/60Hz Short, HiInrush 64 50/60Hz edium, HiInrush 7 D, Short,HiInrush 74 D, edium, HiInrush 9 D, 50/60Hz Short, HiInrush 94 D, 50/60Hz, edium, HiInrush 9 FROT PAEL HARDWARE 6 Handle PushButton o outer Panel Hardware A Knurled ut Bright nickel B Bright nickel w/ locking ring Black D Black w/ locking ring E Panel Dress ut Bright nickel F Bright nickel w/ locking ring G Black H Black w/ locking ring J One actuator is located in the center of each multipole breaker. Switch Only circuits are not available with PushToReset actuators. For Switch Only circuits, select urrent oil Rating from the following chart: VOLTAGE AX. RATIG FREQUEY PHASE FULL AP RATIG AX. APS HOOSE URRET OIL RATIG ODE: GEERAL PURPOSE AP RATIG AX. APS HOOSE URRET OIL RATIG ODE: 65 onsult Factory 65 TUGSTE LAP RATIG 3 One Auxiliary Switch is supplied per breaker. On twopole breakers, standard Auxiliary Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits. ot available with back connect screw or pushin stud terminals. 4 ates with AP.058" diameter pin receptacles including (gold plated) and (tin plated). 5 color is only visible in the OFF position on PushPull actuators. 6 All units have one hex nut installed on bushing for use behind the panel. 7 Other colors available. onsult factory. 8 TUV and VDE ertification above 5 amps is for pole only and is limited to a max. of 5 amps. Screw Terminal or PushIn Stud recommended above 0 amps amp rating not available with delay s 30, 3, 34, 9 or Screw Terminals are VDE certified only with use of ring terminal attached to wire. AX. APS HOOSE URRET OIL RATIG ODE: POLES BREAKIG 3 D D D /60HZ /60HZ /60HZ LEGED PLATE / BUTTO ARKIG Handle Legend Plate ( Styles & ) A o Legend Plate B O OFF Vertical O OFF Horizontal D I O Vertical E I O Horizontal PushPull Button ap ( Styles T & V) o arking Rated Amps Horizontal 3 Rated Amps Line Side Down 4 Rated Amps Line Side Up PushtoReset Button ( Styles U& V) o arking BUSHIG OL 7 B Black AGEY APPROVAL 8 UL Recognized & SAertified D VDE ertified, UL Recognized & SAertified E TUV ertified, UL Recognized & SAertified

5 arling Series Handle/Push Button UL489A/UL Recognized Ordering Scheme Series B 4 60 B B 3 Poles 4 ircuit 5 Frequency & Delay 6 urrent Rating 7 Terminal 8 olor 9 Front Panel Hardware 0 Legend Plate B Bushing olor J Agency Approval SERIES ATUAT 7 TERIAL 4 PushOn 0.50 Tab (Q..) Screw 83 w/upturned lugs 3 Screw 83 (Bus Type) 4 Screw 83 (Backconnected) A PushIn Stud Handle Paddle Baton Push Button T PushPull Push Button w/ SnapIn ounting V PushPull 3 POLES One 4 IRUIT without Auxiliary Switch B Series Trip (urrent) with Auxiliary Switch, Silver ontacts Terminal Type: S Series Trip (urrent).060 Dia, Round Solder Turret T,3 Series Trip (urrent).058 Dia, Round Q.. with Auxiliary Switch, Gold ontacts 4 Series Trip (urrent).058 Dia, Round Solder Turret 5 FREQUEY & DELAY D Short 4 D edium AP ATUAT 6 URRET RATIG (APERES) D, Short,HiInrush 74 D,edium, HiInrush ATUAT OL & LEGED 5 Gloss Handle PushButton olor A White B Black 3 Red 4 D Green 5 E Blue 6 F Yellow 8 H Orange 9 FROT PAEL HARDWARE 6 Handle PushButton o outer Panel Hardware A Knurled ut bright nickel B bright nickel w/ locking ring black D black w/ locking ring E Panel Dress ut bright nickel F bright nickel w/ locking ring G black H black w/ locking ring J 0 LEGED PLATE / BUTTO ARKIG Handle Legend Plate (for Paddle and Baton s) A o Legend Plate B O OFF Vertical O OFF Horizontal D I O Vertical E I O Horizontal PushPull Button ap 8 o arking Rated Amps Horizontal 3 Rated Amps Line Side Down 4 Rated Amps Line Side Up BUSHIG OL 7 B Black AGEY APPROVAL 9 J UL489A LISTED, TUV ERTIFIED UL REOGIZED UL REOGIZED, TUV ERTIFIED T UL489A LISTED One actuator is located in the center of each multipole breaker. One Auxiliary Switch is supplied per breaker. On twopole breakers, standard Auxiliary Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits. ot available with Back onnected Screw or Pushin Stud terminals. 3 ates with AP.058" diameter pin receptacles including (gold plated) and (tin plated). 4 Screw terminals or Pushin Stud recommended above 0 amps. 5 color is only visible in the OFF position on PushPull actuators. 6 All units have one hex nut installed on bushing for use behind the panel. 7 Other colors available. onsult factory. 8 ot available with UL489A Listed breakers. 9 TUV certified to 5 amps. UL Recognized, SA certified and UL Listed to 30 amps.

6 arling Series Rocker UL Recognized Ordering Scheme Series G B H 6 3 Poles 4 ircuit 5 Frequency & Delay 6 urrent Rating 7 Terminal 8 Illumination 9 olor 0 Legend 7 Bezel olor Agency Approval SERIES ATUAT onilluminated single color A Angled B Flat Two olor VisiRocker D Indicate O E Indicate OFF llluminated single color F Angled G Flat STYLE VERTIAL HIZOTAL IDIATE "O" ROKER STYLE DESRIPTIO (DUAL LEGED SHOW) IDIATE "OFF" FLAT AGLED 6 URRET RATIG (APERES) POLES One Two 7 TERIAL 0 PushOn 0.50 Tab (Q..) 3 Screw 83 w/upturned lugs 3 3 Screw 83 (Bus Type) 4 3 Screw 83 (Backconnected) A PushIn Stud 4 IRUIT without Auxiliary Switch A Switch Only (o oil), aintained ontacts B Series Trip (urrent) with Auxiliary Switch, Silver ontacts Terminal Type: P 3 Switch Only, aintained ontacts.060 Dia, Round Solder Turret Q 3, 4 Switch Only, aintained ontacts.058 Dia, Round Q.. S 3 Series Trip (urrent).060 Dia, Round Solder Turret T 3, 4 Series Trip (urrent).058 Dia, Round Q.. with Auxiliary Switch, Gold ontacts 3 Switch Only, aintained ontacts.058 Dia, Round Q.. 4 3, 4 Series Trip (urrent).058 Dia, Round Solder Turret 5 FREQUEY & DELAY 03 D 50/60Hz, Switch Only 0 D Instantaneous D Short 4 D edium 0 50/60Hz Instantaneous 50/60Hz Short 4 50/60Hz edium 30 D, 50/60Hz Instantaneous 3 D, 50/60Hz Short 34 D, 50/60Hz edium 6 50/60Hz Short, HiInrush 64 50/60Hz edium, HiInrush 7 D, Short,HiInrush 74 D,edium, HiInrush 9 D, 50/60Hz Short, HiInrush 94 D, 50/60Hz, edium, HiInrush One actuator is located in the center of each multipole breaker. For Switch Only circuits, select urrent oil Rating from the following chart: VOLTAGE AX. RATIG FREQUEY PHASE FULL AP RATIG AX. APS HOOSE URRET OIL RATIG ODE: GEERAL PURPOSE AP RATIG AX. APS HOOSE URRET OIL RATIG ODE: TUGSTE LAP RATIG 3 D D 7.5 onsult Factory 65 D /60HZ /60HZ /60HZ One Auxiliary Switch is supplied per breaker. On twopole breakers, standard Auxiliary Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip & Switch Only circuits, and is not available in single pole illuminated breakers, or Back onnected Screw or Pushin Stud terminals. 4 ates with AP.058" diameter pin receptacles: (gold plated) & (tin plated). 5 For neon bulb applications at 47K, /4 WATT and for 50VA 50K, /4 WATT, external resistors must be supplied by customer. 6 On VisiRocker breakers, Visi portion of rocker cannot be the same color as the bezel. 7 For LED (D or rectified A) applications, LED is mounted in the center of the rocker actuator with electrical characteristics as follows: 00 millicandela at 0mA; aximum power dissipation = 75mW at 5 ; aximum forward current = 5mA; Typical forward voltage =.V at 0mA; Typical reverse current = 00uA at 3V. ustomer supplies the proper external resistor limiting current to these values. 8 Rocker color for LED s and green neon lamp must be clear, smoke gray, white translucent or match color of LED or neon lamp. 9 Other colors available. onsult factory. 0 TUV and VDE ertified to 5 amps. UL Recognized and SA ertified to 30 amps. Screw Terminals or Pushin Stud recommended above 0 amps. TUV or VDE ertified must have IO or Dual Legends. Legend required on VisiRocker breakers. 30 amp rating not available with delay s 30, 3, 34, 9 or Screw Terminals are VDE certified only with use of ring terminal attached to wire. AX. APS HOOSE URRET OIL RATIG ODE: POLES BREAKIG 8 ROKER ILLUIATIO onilluminated A eon 5 eon Green Glow 8 without resistor, 0VA/50VA B LED 7, 8 Red Green Amber without resistor D G K with resistor, 48 VD E H L with resistor, 96 VD F J 9 ATUAT & LEGED OL Solid olor Legend White Black Black White 3 Red White 4 Green White 5 Blue White 6 Yellow Black 7 Gray Black 8 Orange Black VisiRocker 6 Visi & Legend (remainder of rocker same color as bezel) White Black 3 Red 4 Green 5 Blue 6 Yellow 7 Gray 8 Orange Illuminated 8 Legend A lear Black B Red Transparent White Green Transparent White D Amber Transparent White E Smoke Gray Transparent Black F White Translucent Black 0 LEGED o Legend O OFF Vertical 3 O OFF Horizontal 4 I O Vertical 5 I O Horizontal 6 Dual Vertical 7 Dual Horizontal BEZEL OL / STYLE 9 olor without Rockerguard with Rockerguard White A Black B Gray G 7 AGEY APPROVAL 0 UL Recognized & SAertified D VDE ertified, UL Recognized & SAertified E TUV ertified, UL Recognized & SAertified 3

7 arling Series Rocker UL489A/UL Recognized Ordering Scheme Series A B 4 60 A 6 3 Poles 4 ircuit 5 Frequency & Delay 6 urrent Rating 7 Terminal 8 Illumination 9 olor 0 Legend J Bezel olor Agency Approval SERIES ATUAT onilluminated single color A Angled B Flat Two olor VisiRocker D Indicate O E Indicate OFF llluminated single color F Angled G Flat STYLE VERTIAL HIZOTAL IDIATE "O" 3 POLES One ROKER STYLE DESRIPTIO (DUAL LEGED SHOW) IDIATE "OFF" FLAT AGLED 4 IRUIT without Auxiliary Switch B Series Trip (urrent) with Auxiliary Switch, Silver ontacts Terminal Type S Series Trip (urrent).080 x.00 Flat Q../Solder T 3 Series Trip (urrent).058 Dia, Round Q.. with Auxiliary Switch, Gold ontacts 4 3 Series Trip (urrent).058 Dia, Round Q.. 9 ATUAT & LEGED OL Solid olor Legend White Black Black White 3 Red White 4 Green White 5 Blue White 6 Yellow Black 7 Gray Black 8 Orange Black VisiRocker 6 Visi & Legend (remainder of rocker same color as bezel) White Black 3 Red 4 Green 5 Blue 6 Yellow 7 Gray 8 Orange Illuminated 3 Legend A lear Black B Red Transparent White Green Transparent White D Amber Transparent White E Smoke Gray Transparent Black F White Translucent Black 0 LEGED 0 o Legend (Single olor or Illuminated Rocker Options Only) O OFF Vertical 3 O OFF Horizontal 4 I O Vertical 5 I O Horizontal 6 Dual Vertical 7 Dual Horizontal 5 FREQUEY & DELAY 0 D Instantaneous D Short 6 URRET RATIG (APERES) TERIAL 9 PushOn 0.50 Tab (Q..) Screw 83 w/upturned lugs 3 Screw 83 (Bus Type) 4 D edium 7 D, Short,HiInrush 74 D,edium, HiInrush ILLUIATIO onilluminated A eon 4 eon Green Glow 7 without resistor, 0VA/50VA B LED Red Green Amber without resistor 5, 7 D G K with resistor, 48 VD E H L with resistor, 96 VD F J Screw 83 (Backconnected) A PushIn Stud BEZEL OL / STYLE 8 olor without Rockerguard with Rockerguard White A Black B Gray G 7 AGEY APPROVAL 9 J UL489AListed & TUV ertified UL Recognized & SAertified TUV ertified, UL Recognized & SAertified T UL489A Listed One actuator is located in the center of each multipole breaker. One Auxiliary Switch is supplied per breaker. Auxiliary Switch option limited to Series Trip & Switch Only circuits, and is not available in single pole illuminated breakers, or with Back onnected Screw or Pushin Stud terminals. 3 ates with AP.058" diameter pin receptacles: (gold plated) & (tin plated). 4 For neon bulb applications at 47K, /4 WATT and for 50VA 50K, /4 WATT, external resistors must be supplied by customer. 5 For LED (D or rectified A) applications, LED is mounted in the center of the rocker actuator with electrical characteristics as follows: 00 millicandela at 0mA; aximum power dissipation = 75mW at 5 ; aximum forward current = 5mA; Typical forward voltage =.V at 0mA; Typical reverse current = 00uA at 3V. ustomer supplies the proper external resistor limiting current to these values. 6 On VisiRocker breakers, Visi portion of rocker cannot be the same color as the bezel. 7 Rocker color for LED s and green neon lamp must be clear, smoke gray, white translucent or match color of LED or neon lamp. 8 Other colors available. onsult factory. 9 TUV ertified to 5 amps. UL Recognized, SA ertified and UL489A Listed to 30 amps. Screw Terminals recommended above 0 amps. 0 UL489A Listed must have OOFF or Dual legends. TUV ertified approvals must have I O or Dual legends. 4

8 arling Series Handle ircuit & Terminal Diagrams TERIAL DIESIOAL DETAIL TAB (Q..) TERIAL SREW TERIAL #83 WITH UPTURED LUGS SREW TERIAL #83 BUS PUSHI STUD TERIAL AI TER'S. (SEE TABLE A).95 [3.] SWITH OLY.50 [6.35].375 [9.53].375 [9.53].000 [5.4].393 [9.97]*.370 [9.40].40 [0.4].40 [0.4].54 [3.9].00 [.54].750 [9.05] *ETER OF PUSHI STUD OTAT AREA W/ AUXILIARY SWITH AUXILIARY SWITH TERIALS.65 [4.9].55 [3.94] O AUX. SWITH TER'S..060 DIA [Ø.5].058 DIA [Ø.47].350 [8.89] DOUBLE SOLDER TURRET TYPE ROUD QUIKOET TYPE ULTIPOLE IDETIFIATIO SHEE SEE TABLE A DEPTH BEHID PAEL FAE +.00 [+.05].000 [.00].6 DIA [Ø 4.0] O.5 [8.58] PUSHI STUD POLE FIG. A.03 [.8] TYP.5 [3.8] TYP ATIG HOLE TABLE A TERIAL DESRIPTIO DEPTH BEHID * PAEL FAE AI AUX. ** SWITH TAB (Q.) SREW (#83)*** PUSHI STUD DOUBLE SOLDER TURRET TYPE ROUD Q. TYPE.890 [48.00].930 [49.03].50 [64.00].035 [5.69].05 [5.44] *DEPTH ILUDES BEHID PAEL HEX UT AS SUPPLIED O ALL UITS. **WHE ALLED F O ULTIPOLE UITS, OLY OE AUX. SWITH IS ALLY SUPPLIED, OUTED AS SHOW I FIG. A ***REOEDED TIGHTEIG TQUE 5 ILBS [.4.7 ] All dimensions are in inches [millimeters]. Tolerance ±.05 [.38] unless otherwise specified. 5

9 arling Series Handle Form & Fit Drawings PADDLE ATUAT STYLE SIGLE POLE /3 THD..395 [35.43].5 [3.8].680 [7.7] O.375 [34.93] OFF.5 [8.58] FLAT.500 [.70].470 [.94] ±.05 ± [9.40] TAB (Q..) TERIALS SHOW. F TERIAL DETAILS.765[44.83] SEE IRUIT AD TERIAL DIAGRAS. DOUBLE POLE /3 THD..545 [39.4].5 [3.8]].304 [33.] O.375 [34.93] OFF.5 [8.58] FLAT.500 [.70].470 [.94].765 [44.83] ±.05 ± [9.40].65 [5.88] BATO ATUAT STYLE.65 [5.88].500 DIA [Ø.70] OUTIG DETAILS DIA [Ø.70] ±.005 [±.3].355 [9.0] DIA [Ø3.8] ±.00 [±.050]. [5.64].80 DIA [Ø4.57] WITH LOKIG RIG WITHOUT LOKIG RIG LEGED PLATES.05 [.64].340 [8.64].63 DIA [Ø6.05] 0.05 [6.04] O O F F 0FF LEGED ODE: B D E PAEL HARDWARE.65 [5.88].5 [3.8].680 DIA [Ø7.7].80 [4.57].680 DIA [Ø7.7].5 [3.8].05 [.67].34 [8.69].683 DIA [Ø7.7].03 [.79] HEX UT PAEL DRESS UT KURLED UT LOKIG RIG OTES:. TOLERAES ±.00 [.5] ULESS OTHERWISE SPEIFIED.. ALL DIESIOS SHOW ARE I IHES [mm] All dimensions are in inches [millimeters]. Tolerance ±.00 [.5] unless otherwise specified. 6

10 arling Series Pushbutton ircuit & Terminal Diagrams TERIAL DIESIOAL DETAIL AI TER'S. (SEE TABLE A) TAB (Q..) TERIAL SREW TERIAL #83 WITH UPTURED LUGS SREW TERIAL #83 BUS PUSHI STUD TERIAL.95 [3.] SWITH OLY (PUSHPULL OLY).50 [6.35].375 [9.53].375 [9.53].000 [5.4].393 [9.97]*.370 [9.40].40 [0.4].40 [0.4].00 [.54].750 [9.05].54 [3.9] W/ AUXILIARY SWITH.65 [4.9] AUXILIARY SWITH TERIALS.55 [3.94] *ETER OF PUSHI STUD OTAT AREA O.060 DIA [Ø.5].058 DIA [Ø.47].350 [8.89] AUX. SWITH TER'S. DOUBLE SOLDER TURRET TYPE ROUD QUIKOET TYPE ULTIPOLE IDETIFIATIO SHEE SEE TABLE A DEPTH BEHID PAEL FAE +.00 [+.05].000 [.00].6 DIA [Ø 4.0] O.5 [8.58] PUSHI STUD POLE ATIG HOLE FIG. A.03 [.8] TYP.5 [3.8] TYP AI AUX. ** SWITH TAB (Q.) SREW (#83) PUSHI STUD ROUD Q. TYPE TABLE A TERIAL DESRIPTIO DOUBLE SOLDER TURRET TYPE DEPTH BEHID * PAEL FAE.95 [49.57].99 [50.60].530 [64.6].097 [53.6].087 [53.0] *DEPTH ILUDES BEHID PAEL HEX UT AS SUPPLIED O ALL UITS. **WHE ALLED F O ULTIPOLE UITS, OLY OE AUX. SWITH IS ALLY SUPPLIED, OUTED AS SHOW I FIG. A All dimensions are in inches [millimeters]. Tolerance ±.05 [.38] unless otherwise specified. 7

11 arling Series Pushbutton Form & Fit Drawings PUSHPULL ATUAT STYLE SIGLE POLE.484 [37.69].5 [3.8].375 [34.93].680 [7.7] 3/8" 83 THD. FLAT ATUAT OL VISIBLE I OFF POSITIO OLY.500 [.70] OFF ( SHOW).80 [7.] O.400 [0.6].854 [47.09].5 [8.58] ±.05 ± [9.40] TAB (Q..) TERIALS SHOW F TERIAL DETAILS SEE IRUIT AD TERIAL DIAGRAS. DOUBLE POLE 3/8" 83 THD..5 [3.8].644 [39.4].375 [34.93].304 [33.] FLAT ATUAT OL VISIBLE I OFF POSITIO OLY.500 [.70] OFF (SHOW).80 [7.] O.5 [8.58] ±.05 ± [0.6].370 [9.40].854 [47.09] TAB (Q..) TERIALS SHOW F TERIAL DETAILS SEE IRUIT AD TERIAL DIAGRAS..65 [5.88] PUSHTESET ATUAT STYLE.00 [5.59] OFF FLUSH O OUTIG DETAILS ±.00 ±.05.6 [4.] [9.53] DIA PUSHPULL, PUSH TO RESET SAPI BUSHIG ATUAT STYLE SEE OTE 3.65 [5.87] DIA.544[3.8].00 [5.59] OFF FLUSH O SAPI BUSHIG PAEL HARDWARE.400 [0.6].494 [.55].098 [.49] BUTTO ARKIG IETATIO (PUSHPULL OLY) HEX UT [3.56].534 [3.56].078 [.98] ARKIG ODE: [.05] DIA PAEL DRESS UT All dimensions are in inches [millimeters]. Tolerance ±.00 [.5] unless otherwise specified. 3 Available with PushPull or PushtoReset s. 8

12 arling Series Rocker ircuit & Terminal Diagrams W/ ILLUIATED ROKER TERIAL DIESIOAL DETAIL TAB (Q..) TERIAL SREW TERIAL #83 WITH UPTURED LUGS AI TER'S. (SEE TABLE A) ±.5 [.7] 7.00 [77.8] LOG RED(+), BLAK() LEADS.50 [6.35].375 [9.53] SWITH OLY SWITH OLY W/ ILLUIATED ROKER.370 [9.40].069 [.75] DIA.40 [0.4] SREW TERIAL #83 BUS PUSHI STUD TERIAL.350[8.89] W/ AUXILIARY SWITH +.00 [+.05].000 [.00].6 DIA [Ø 4.0].375 [9.53].000 [5.4].95 [3.].39 [9.97]* O AUX SWITH TER'S PUSHI STUD ATIG HOLE.40 [0.4].00 [.54].54 [3.9].350[8.89] SEE TABLE A DEPTH BEHID PAEL FAE.750 [9.05] AUXILIARY SWITH TERIALS *ETER OF PUSHI STUD OTAT AREA.530 [38.86] REF..65 [4.9].55 [3.94].5 [8.58] TYP..03 [.8] TYP..5 [3.8] TYP..060 DIA [Ø.5] DOUBLE SOLDER TURRET TYPE ROUD QUIKOET TYPE.058 DIA [Ø.47] AI * AUX. SWITH TABLE A TERIAL DESRIPTIO TAB (Q..) SREW (#83)** PUSHI STUD DOUBLE SOLDER TURRET TYPE ROUD Q.. TYPE DEPTH BEHID PAEL FAE.900 [48.6].940 [49.8].530 [64.6].045 [5.94].035 [5.69] * AUX. SWITH IS OT AVAILABLE O SIGLE POLE ILLUIATED UITS. WHE ALLED F O ULTIPOLE UITS, OLY OE AUX. SWITH IS ALLY SUPPLIED, OUTED AS SHOW I FIG. A FIG. B. **REOEDED TIGHTEIG TQUE 5 I LBS [.4.7 ] All dimensions are in inches [millimeters]. Tolerance ±.05 [.38] unless otherwise specified. 3 Schematic shown represents current trip circuit. POLE FIG. A ULTIPOLE IDETIFIATIO SHEE VISIOFF, SIGLE OL & ILLUIATED OPTIOS OLY O VISIO OPTIO OLY POLE O FIG. B 9

13 arling Series Rocker Form & Fit Drawings IDIATE "O" (VISIO).770 [9.56] SIGLE POLE.370 [9.40] AX. ±.00 [±.508].530 [38.86].5 [3.8] ±.00 [±.508].680 [7.7] SEE OTE [4.64] OFF O.560 [39.6] ±.030 [±.76].5 [8.58].375 [34.93].400 [0.6] SEE OTE # 4.00 [.54] ±.030 [±.76].900 [48.6] ±.05 [±.38].370 [9.40] TAB (Q..) TERIALS SHOW. F TERIAL DETAILS SEE IRUIT AD TERIAL DIAGRAS DOUBLE POLE.370 [9.40] AX..394 [35.4] ±.00 [±.508].530 [38.86].5 [3.8] ±.00 [±.508].304 [33.].970 [4.64] OFF O.560 [39.6] ±.030 [±.76].5 [8.58].375 [34.93].400 [0.6].00 [.54].370 [9.40].65 [5.88] ±.00 [±.508].680 [4.67] ±.030 [±.76].900 [48.6] IDIATE "OFF" (VISIOFF) AD SIGLE OL SIGLE POLE DOUBLE POLE O O OFF OFF SEE OTE 5 AGLED ROKER STYLE SIGLE OL FLAT ROKER STYLE ROKERGUARD OFIGURATIO DIESIOS ALSO APPLY TO DOUBLE POLE.360 [9.4].360 [9.4].675 [7.4].305 [7.75] O.050 [6.67] OFF SEE OTE #4 SIGLE POLE PAEL UT OUT DETAIL DOUBLE POLE PAEL THIKESS DI. A DI. A DI. A.06 [.57].385 [35.8].093 [.36].40 [36.07] ±.005 ±.3 ±.005 ±.3.5 [3.8].460 [37.08].7 [8.03].39 [33.76] Dimensions apply to all variations shown. otice that circuit breaker line & load terminal orientation on indicate OFF is opposite of indicate O. IO, OOFF or dual legends available for vertical or horizontal mounting. For pole orientation with horizontal legend, rotate front view clockwise All dimensions are in inches [millimeters]. 4 Tolerance ±.00 [.5] unless otherwise specified. 30

14 arling Series Rocker Supplementary Diagrams OE POLE ROKER AD AUXILIARY SWITH OPTIOS FIGA OILLUIATED (SIGLE OL AD VISIOFF) ROKER OPTIOS WITH AUXILIARY SWITH FIGB O ILLUIATED (VISIO) OPTIO OLY WITH AUXILIARY SWITH FIG ALLROKER OPTIOS WITHOUT AUXILIARY SWITH (VISIO) (VISIOFF) AD SIGLE OL O O (VISIO) (VISIOFF) AD SIGLE OL AVAILABLE IRUIT OPTIOS: "SWITH OLY" "SWITH OLY" "SWITH OLY" TWO POLE ROKER AD AUXILIARY SWITH OPTIOS FIGD ILLUIATED AD OILLUIATED (SIGLE OL AD VISIOFF) ROKER OPTIOS WITH () AUXILIARY SWITH FIGE OILLUIATED (VISIO) OPTIO OLY WITH () AUXILIARY SWITH FIGF ALLROKER OPTIOS WITHOUT AUXILIARY SWITH (VISIO) (VISIOFF) AD SIGLE OL O O (VISIO) (VISIOFF) AD SIGLE OL AVAILABLE IRUIT OPTIOS: POLE "SWITH OLY" "SWITH OLY" POLE "SWITH OLY" "SWITH OLY" POLE "SWITH OLY" "SWITH OLY" ULTIPOLE BREAKERS ARE AVAILABLE WITH A AXIU OF AUXILLIARY SWITH OUTED AS SHOW ABOVE POLE DESIGATIOS F HIZOTAL OUTIG/LEGED ALL ROKER STYLES (VISIO) (VISIO) POLE (VISIOFF AD SIGLE OL) (VISIOFF AD SIGLE OL) 3