Benefits. Control. KeyCreator V11.3 features
|
|
- Jerome Sharp
- 6 years ago
- Views:
Transcription
1 1
2 Benefits KeyCreator 2012 V11.3 is an important update addressing performance issues with drawing view creation. The release also provides interoperability updates, a dozen small enhancements in KeyCreator and the Analysis and Compare extensions, and corrects over 150 issues since the service pack. Users of V11.0 are strongly encouraged to install this update. KeyCreator V11.3 features - Fresh install with default settings - Installs to new folder, does not interfere with V11.0 installs - CKD files are 100% compatible between 11.0 and 11.3 Control Greater control supports time savings by allowing users to accomplish their desired results with fewer steps. KeyCreator V11.3 includes several minor improvements to existing functions to increase user control. - View Instance properties now offer a third Hidden Line Rendering method to provide users more control over the performance vs. quality when generating and updating drawing views. Three Hidden Line Rendering options are available when creating or editing drawing views 2
3 Hidden Line Rendering This facet-based option was formerly called HOOPS Hidden Line Rendering and provides a good result with most parts but in some cases does not handle overlapping edges and line attributes properly. Precise Hidden Line Rendering [default] This face-based option was formerly called Advanced Precise Hidden Line Rendering and in most cases provides an improved result over the base Hidden Line Rendering option. This option is recommended for best performance and overall quality. Advanced Precise Hidden Line Rendering This new face-based option was introduced in KeyCreator 2012 and provides an improved result over the Precise Hidden Line Rendering option for complex overlapping spline faces at the expense of longer processing times on most parts. - Dynamic Array Function Improvements Added option to Position method for continuous selection of DynaHandle positions at which to locate copies. 3
4 New Add and Remove options in Position Array menu support changing the set of DynaHandles defined for the operation. New Conversation Bar menu for the Position (Pos) option of Transform>Dynamic Array Added chain selection menu (Curve or Circuit) for Along/AlongN Array methods to automate the selection of a valid chain of entities or edges to define the path. Chain Selection Menu added to the Along/AlongN options of Transform>Dynamic Array - The View icons/hotkeys include new options for C-Plane synchronization. The one option provides the ability to switch the active construction plane to match the view when switching to an orthometric view (1 Top, 2 Front, 5 Right, etc.). This is a helpful shortcut when the intent is to create a planar sketch in the new view. A separate option sets the active construction plane to 1 (top/world view) when switching the view to an axonometric view (7 Isometric or 8 Axonometric). - The View icons/hotkeys include new options for changing the line width setting. When switching the view to an orthometric view the user has the option to set line width to 3. Thickening the line width for improved visibility is a helpful shortcut when the intent is to create a planar sketch in the new view. A separate option sets the line width to 1 when switching the view to an axonometric view. Interoperability The leading direct modeling capabilities of KeyCreator support dramatic time savings when working with models created by others. To facilitate the re-use of models created in other CAD software; Kubotek is constantly updating the extensive import capabilities of KeyCreator. The 2012 release V11.3 of KeyCreator features several significant interoperability improvements. - ACIS SAT/SAB Import and Export enhanced to support R23 version files - Parasolid X_T/X_B Import and Export enhanced to support version 25 files - PTC (Pro/E) part and assembly import support extended to Creo 2.0* *requires KeyCreator license extended beyond base (B level) 4
5 - IGES import has a new option Merge Redundant Faces and Edges. This option is on by default to help clean up imported geometry and reduce model size but can be disabled if the split faces are useful for working with the imported geometry. - Cleaning options in the Clean Entities function have been expanded to correct errors in four additional entity types; Crosshatch, View Instances, Centerlines, and Base Linear Dimensions. Cleanable entity errors most offer occur during translation between file formats (DWG, etc.) and involve wildly incorrect numbers in the entities data structure. The Clean Entities dialog (Tools>Maintenance>Clean Entities) 5
6 Setup Added settings options allow users to configure function output to match their styles and preferences. - View icons/hotkeys options for autoscaling, and C-Plane synchronization and managing line width for sketching/modeling can be set to match user preference and saved in template (CKT) or CKD seed files. The View Change Settings dialog is accessed using the Alt+= hotkey in the standard keyboard. - The View Button Set dialog is also available from Tools>Customize>Commands>Immed KXL 1. 6
7 Bonus Tools KeyCreator includes numerous extra utility CDEs and KXL programs improve productivity for special cases or provide alternatives to existing functions. For the V11.3 release several new KXL programs, with full source code, have been provided. - RenderBodies.KXL and UnrenderBodies.KXL These utilities provide users who typically use wireframe mode the capability to quickly select solids to render and one-click revert them back to wireframe display. They provide similar capability as Edit>Entities>Set Entity Rendering and UnSet Entity Rendering functions with fewer mouse clicks. These two new KXL programs are registered with KeyCreator upon install and include icons for placement in custom toolbars. The icons can be found under Tools>Customize>Commands>Immed KXL 1. - Recycle.KXL The Recycle utility provides an alternative to deletion of entities. Each Recycle operation moves entities to a unique new non-displayed sublevel under a Recycle base level. These entities can be restored by simply moving them back to a normal level. This KXL program is a replacement for the former Recycler.KXL (KeyCreator 5-9), is registered with KeyCreator upon install, and includes an icon for placement in custom toolbars. The icon can be found under Tools>Customize>Commands>Root KXL 1. - SetNameToID.KXL The SetNameToID utility program changes the name of all displayed faces and bodies to their corresponding ID number. The name will appear in the selection ToolTip making locating specific faces easier. This new KXL program includes an icon for placement in custom toolbars. It is not registered during install but can be loaded from the KXL\ Utility folder. 7
8 - MoveIDtoALev.KXL The MoveIDtoALev utility quickly isolates entities based on a user typed ID number and moves it to the active level. This is especially useful for finding entities reported as bad by an error checking function. MoveIDtoALev.KXL can be loaded from the KXL\Utility folder. - UpdateFields.KXL The UpdateFields utility forces an update to display the current value of each field in all KeyCreator note entities which include Field codes. UpdateFields.KXL can be loaded from the KXL\Utility folder. The Field Codes menu - OneClickPrint.KXL The OneClickPrint utility function sends the active viewport to the default printer using all printing default settings configured in KeyCreator. OneClickPrint.KXL can be loaded from the KXL\Utility folder. - NewBackgroundColors.KXL and NewPaletteColors.KXL These two utility programs allow users to change the color properties of the active KeyCreator part to match the settings of the default template file. This is helpful for updating older CKD files to match with new files. The NewBackgroundColors program specifically sets all 19 color settings on the File>Properties>Display Colors page. The NewPaletteColors program sets the 64 colors in the palette on the File>Properties>Entity Attributes page. NewBackgroundColors.KXL and NewPaletteColors.KXL can be loaded from the KXL\Utility folder. 8
9 Analysis KeyCreator Analysis was introduced in KeyCreator 2012 V11.0 providing a fully embedded FEA setup and solving option. For the 11.3 release, all levels of KeyCreator Analysis have been extended with 2D mesh options for more efficient handling of models whose symmetry allows simplification to a 2D case. - 2D Plane Strain handles cross-sections of long parts with no axial deflection (bridge, pipe, etc.) - 2D Plane Stress handles uniform thickness models with loads limited to a single plane - 2D Axisymmetric handles cross-sections rotated around a single axis (o-ring, grommet, pint glass, etc.) Compare The KeyCreator Compare module accurately tests the equivalence of two CAD models to user specified tolerances. - The Examine View Window function has been redesigned to synchronize the display of the model between the Examine View Window and both part viewports for improved visualization of model differences and simplified function interface. All standard KeyCreator 3D navigation functions simply work in any of these three windows and update the other two. Kubotek USA, Inc. 2 Mount Royal Ave. Suite 500, Marlborough, MA Phone: sales@kubotekusa.com 9
Benefits. Interoperability. Control
1 Benefits KeyCreator 2012 V11.5 is a minor release providing interoperability updates, a half-dozen new functions, a dozen enhancements, and correction of over 90 issues since the 11.3.1 service pack.
More informationKEYCREATOR 3D Direct Modeling Software
KeyCreator Lesson KC9203 BOM Creation with Part References In this exercise, we ll create a Bill of Material (BOM) and balloons for the simple assembly illustrated to the right. This is an assembly using
More informationKubotek KeyCreator V8.5 What s New Page 1 of 12. Kubotek KeyCreator V8.5 What s New
Page 1 of 12 Kubotek KeyCreator V8.5 What s New Page 2 of 12 Table of Contents File Management 3 General Interface 4 Detailing/Drawing 5 Modeling 10 Display and Graphics 12 Page 3 of 12 File Management
More information2D Drafting Redefined
Scan QR Code to Redirect to Product Page IRONCAD DRAFT XG is a powerful 2D design environment for creating, detailing, and editing production designs. This environment offers unrivaled compatibility with
More informationSolidWorks Implementation Guides. User Interface
SolidWorks Implementation Guides User Interface Since most 2D CAD and SolidWorks are applications in the Microsoft Windows environment, tool buttons, toolbars, and the general appearance of the windows
More informationGetting Started Guide
Getting Started Guide Design and Create 3D PDF Documents Tetra4D Converter - Add in for Adobe Acrobat Pro 1 of 10 After the installation of Tetra4D Converter, start Acrobat 2 of 10 Click on Tools in the
More information3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
More informationParametric Modeling Design and Modeling 2011 Project Lead The Way, Inc.
Parametric Modeling Design and Modeling 2011 Project Lead The Way, Inc. 3D Modeling Steps - Sketch Step 1 Sketch Geometry Sketch Geometry Line Sketch Tool 3D Modeling Steps - Constrain Step 1 Sketch Geometry
More informationFinite Element Analysis Using Creo Simulate 4.0
Introduction to Finite Element Analysis Using Creo Simulate 4.0 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationAutodesk Fusion 360 Training: The Future of Making Things Attendee Guide
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to
More information1 - Introduction Training Guide Objectives WorkXplore Environment Importing and Opening CAD Files 5
Table Of Contents 1.1 - Training Guide Objectives Table Of Contents 1 - Introduction 3 1.1 - Training Guide Objectives... 3 1.2 - WorkXplore Environment... 3 2 - Importing and Opening CAD Files 5 2.1 -
More informationAutoCAD 2009 Tutorial
AutoCAD 2009 Tutorial Second Level: 3D Modeling Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD 2009
More informationTraining Guide Getting Started with WorkXplore 3D
Training Guide Getting Started with WorkXplore 3D Table of Contents Table of Contents 1 Training Guide Objectives 1-1 2 WorkXplore 3D Environment 2-1 3 Importing and Opening CAD Files 3-1 3.1 Importing
More informationKEYCREATOR 3D Direct Modeling Software
KeyCreator Lesson KC5107 Graft The Graft Function is a powerful partner to the Prune Function that we used earlier. You will typically use the Graft Function immediately after performing a pruning operation
More informationAutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP02
AutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP02 AutoCAD Import Limitations The following is a list of AutoCAD features that will not give an expected viewable when using SAP 3D Visual
More informationAutodesk Revit MEP 2013
Autodesk Revit MEP 2013 This document was last updated on March 22th, 2012. The following are Known Issues with this release: Assemblies When an assembly view is rotated, the crop region does not rotate
More informationSpaceClaim Professional The Natural 3D Design System. Advanced Technology
SpaceClaim Professional The Natural 3D Design System SpaceClaim Professional is the 3D productivity tool for engineers who contribute to the design and manufacture of mechanical products across a broad
More informationLAB # 2 3D Modeling, Properties Commands & Attributes
COMSATS Institute of Information Technology Electrical Engineering Department (Islamabad Campus) LAB # 2 3D Modeling, Properties Commands & Attributes Designed by Syed Muzahir Abbas 1 1. Overview of the
More informationExercise 2: Bike Frame Analysis
Exercise 2: Bike Frame Analysis This exercise will analyze a new, innovative mountain bike frame design under structural loads. The objective is to determine the maximum stresses in the frame due to the
More informationExercise 2: Bike Frame Analysis
Exercise 2: Bike Frame Analysis This exercise will analyze a new, innovative mountain bike frame design under structural loads. The objective is to determine the maximum stresses in the frame due to the
More informationPublication Number spse01695
XpresRoute (tubing) Publication Number spse01695 XpresRoute (tubing) Publication Number spse01695 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
More informationWILDFIRE 3.0. Sheetmetal Assembly of a Bucket. Yves Gagnon, M.A.Sc. SDC
INTRODUCTION TO PRO/SHEETMETAL WILDFIRE 3.0 Sheetmetal Assembly of a Bucket Yves Gagnon, M.A.Sc. SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Estimated time:
More informationWhat s new in Femap 9.3
What s new in Femap 9.3 fact sheet www.ugs.com/femap Summary Femap version 9.3 is the latest release of UGS robust pre and post processor for engineering finite element analysis (FEA). Femap software is
More informationCreating T-Spline Forms
1 / 28 Goals 1. Create a T-Spline Primitive Form 2. Create a T-Spline Revolve Form 3. Create a T-Spline Sweep Form 4. Create a T-Spline Loft Form 2 / 28 Instructions Step 1: Go to the Sculpt workspace
More informationAutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP03
AutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP03 AutoCAD Import Limitations The following is a list of AutoCAD features that will not give an expected viewable when using SAP 3D Visual
More informationWILDFIRE 4.0. Sheetmetal Assembly of a Bucket. Yves Gagnon, M.A.Sc. SDC
INTRODUCTION TO PRO/SHEETMETAL WILDFIRE 4.0 Sheetmetal Assembly of a Bucket Yves Gagnon, M.A.Sc. SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Estimated time:
More informationWhat's New in Autodesk Inventor 2020
What's New in Autodesk Inventor 2020 This year we celebrate Inventor's 20-year anniversary with the release of Inventor 2020. This release delivers a host of enhancements to help you solve complex product
More informationLesson 1: Creating T- Spline Forms. In Samples section of your Data Panel, browse to: Fusion 101 Training > 03 Sculpt > 03_Sculpting_Introduction.
3.1: Sculpting Sculpting in Fusion 360 allows for the intuitive freeform creation of organic solid bodies and surfaces by leveraging the T- Splines technology. In the Sculpt Workspace, you can rapidly
More informationEquipment Support Structures
Equipment Support Structures Overview Conventions What's New? Getting Started Setting Up Your Session Creating a Simple Structural Frame Creating Non-uniform Columns Creating Plates with Openings Bracing
More informationChanges from SolidWorks 2003 to SolidWorks 2004
Changes from SolidWorks 2003 to SolidWorks 2004 The changes from SolidWorks 2003 to SolidWorks 2004 are primarily cosmetic. Consequently, it is quite easy to use the current edition of Learning SolidWorks
More informationWeek 2 Lecture 3D Part Design. ME Introduction to CAD/CAE Tools
Week 2 Lecture 3D Part Design Lecture Topics Product Lifecycle Process Review Detailed Product Engineering Challenges and Purpose Evolution of CAD General 3D Design Concepts Case Study Examples Product
More informationEquipment Support Structures
Page 1 Equipment Support Structures Preface Using This Guide Where to Find More Information Conventions What's New? Getting Started Setting Up Your Session Creating a Simple Structural Frame Creating Non-uniform
More informationGetting Started with ShowcaseChapter1:
Chapter 1 Getting Started with ShowcaseChapter1: In this chapter, you learn the purpose of Autodesk Showcase, about its interface, and how to import geometry and adjust imported geometry. Objectives After
More informationMechanical Design V5R19 Update
CATIA V5 Training Foils Mechanical Design V5R19 Update Version 5 Release 19 August 2008 EDU_CAT_EN_MD2_UF_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able
More informationPublication Number spse01695
XpresRoute (tubing) Publication Number spse01695 XpresRoute (tubing) Publication Number spse01695 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
More informationTRAINING SESSION Q3 2016
There are 6 main topics in this training session which is focusing on 3D Import and 2D Drawing Tips and Tricks in IRONCAD. Content 3D modeling kernels... 2 3D Import... 3 Direct Face Modeling... 5 Unfold
More informationversion 8.5 release notes
version 8.5 release notes build #9647 form Z pro v8.5 introduces a new suite of creative design tools to enhance form generation. These tools offer a variety of ways to create new and interesting forms
More informationCOMPUTER AIDED ARCHITECTURAL GRAPHICS FFD 201/Fall 2013 HAND OUT 1 : INTRODUCTION TO 3D
COMPUTER AIDED ARCHITECTURAL GRAPHICS FFD 201/Fall 2013 INSTRUCTORS E-MAIL ADDRESS OFFICE HOURS Özgür Genca ozgurgenca@gmail.com part time Tuba Doğu tubadogu@gmail.com part time Şebnem Yanç Demirkan sebnem.demirkan@gmail.com
More informationCreate the Through Curves surface
Create the Through Curves surface 1. Open ffm4_mc_fender. 2. Select all three strings, and then on the Analyze Shape toolbar, click Show End Points. Notice there are two curves in the strings on the left
More informationVerisurf X Verisurf Tools
Verisurf X Verisurf Tools Verisurf Software, Inc. Verisurf X Tools User Manual Preface This Reference Manual contains information protected by copyright and subject to change without notice. No part of
More informationImporting Geometry from an IGES file
WORKSHOP 2 Importing Geometry from an IGES file Objectives: Import geometry from an IGES file. Create a solid from curves and surfaces. Tet mesh the solid. MSC.Patran 301 Exercise Workbook 2-1 2-2 MSC.Patran
More informationModeling a Scanned Object with RapidWorks
Modeling a Scanned Object with RapidWorks RapidWorks allows you to use a scanned point cloud of an object from the NextEngine Desktop 3D Scanner to create a CAD representation of an object. This guide
More informationImporting Geometry from an IGES file
LESSON 2 Importing Geometry from an IGES file Objectives: Import geometry from an IGES file. Create a solid from curves and surfaces. Tet mesh the solid. PATRAN 301 Exercise Workbook - Release 7.5 2-1
More informationMSC.visualNastran Desktop FEA Exercise Workbook. Pin and Bracket Assembly: Vibration Simulation in 4D
MSC.visualNastran Desktop FEA Exercise Workbook Pin and Bracket Assembly: Vibration Simulation in 4D WS24-2 Objectives This exercise is design to introduce vibration analysis in visualnastran Desktop.
More informationUser Interface & Usability
User Interface & Usability 1: Ribbon Interface: TurboCAD 2018 (All versions) New Interface "Ribbon" is embedded now in TC 2018. Ribbon interface will be optional not default. There will be a Popup on startup
More informationAutoCAD. Professional Tips and Techniques. Lynn A l l e n Scott Onstott JICENTENNIAL BICENTENNIAL
AutoCAD Professional Tips and Techniques Lynn A l l e n Scott Onstott JICENTENNIAL BICENTENNIAL WILEY PUBLISHING, INC. Introduction xvii Chapter 1 Arranging the AutoCAD User Interface 1 Tweaking Windows
More informationGeomagic Design. Release Notes. Get to Market Faster with Better Products at a Lower Cost V17
Geomagic Design Get to Market Faster with Better Products at a Lower Cost Release Notes V17 TABLE OF CONTENTS 1 INTRODUCTION 1 COPYRIGHT 1 WARRANTY 1 2 INSTALLATION GUIDE 2 SOFTWARE IDENTIFICATION 2 UPGRADING
More informationUpdate to Creo Parametric 4.0 from Creo Parametric 2.0
Update to Creo from Creo Parametric 2.0 Overview Course Code Course Length TRN-5125-T 16 Hours In this course, you will learn how to utilize the variety of functionality enhancements in Creo. You will
More informationAUTODESK FUSION 360 Designing a RC Car Body
AUTODESK FUSION 360 Designing a RC Car Body Abstract This project explores how to use the sculpting tools available in Autodesk Fusion 360 Ultimate to design the body of a RC car. John Helfen john.helfen@autodesk.com
More informationONYX 12 Finishing Tools
WHITE PAPER ONYX 12 ONYX 12 Finishing Tools ONYX 12 provides the ability to add bleed and grommets to any job. They are a part of the new Finishing tools. This document explains how to use bleed and grommets.
More informationSOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users
SOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users The premium provider of learning products and solutions www.cadartifex.com Table of Contents Dedication... 3 Preface... 15 Part 1. Introducing
More information2: Static analysis of a plate
2: Static analysis of a plate Topics covered Project description Using SolidWorks Simulation interface Linear static analysis with solid elements Finding reaction forces Controlling discretization errors
More informationChapter 2 Parametric Modeling Fundamentals
2-1 Chapter 2 Parametric Modeling Fundamentals Create Simple Extruded Solid Models Understand the Basic Parametric Modeling Procedure Create 2-D Sketches Understand the Shape before Size Approach Use the
More informationSimLab 14.2 Release Notes
SimLab 14.2 Release Notes Highlights SimLab 14.2 comes with various changes that improve performance and graphics rendering. In addition to java scripting, python scripting is introduced. The enhancements,
More informationDFTG 1309 Instructor I. Zhebrak. Class Single line text - Creating text styles - Justification - Insert symbols
DFTG 1309 Instructor I. Zhebrak Class 17 LECTURE: - Single line text - Creating text styles - Justification - Insert symbols GRADED EXERCISES: - Draw Surveyor Plan using Spline and Line commands. Calculate
More informationTutorial - Steering Wheel
Tutorial - Steering Wheel (written by Jacob Tremmel, Student at Altair) This tutorial is about modeling (CAD) and rendering of a Steering Wheel with Altair s solidthinking Evolve 9.0. 1 Modeling 1. At
More information3D AUTOCAD. The view we ve been working in is a top or plan view. From this view even a 3D drawing will appear 2D.
3D AUTOCAD Thus far, we ve looked at tools and operations in 2D with work completed on only the X- and Y- axes. The axes symbol has been present on our screen but we haven t had much use for it. The view
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationAdvance Design. Tutorial
TUTORIAL 2018 Advance Design Tutorial Table of Contents About this tutorial... 1 How to use this guide... 3 Lesson 1: Preparing and organizing your model... 4 Step 1: Start Advance Design... 5 Step 2:
More informationWhat's New in Autodesk Inventor 2016
What's New in Autodesk Inventor 2016 Inventor 2016 enables you to break through boundaries typically associated with 3D modeling, delivering an invaluable connected design experience between you, the data,
More informationECE 480: Design Team #9 Application Note Designing Box with AutoCAD
ECE 480: Design Team #9 Application Note Designing Box with AutoCAD By: Radhika Somayya Due Date: Friday, March 28, 2014 1 S o m a y y a Table of Contents Executive Summary... 3 Keywords... 3 Introduction...
More informationGstarCAD Complete Features Guide
GstarCAD 2017 Complete Features Guide Table of Contents Core Performance Improvement... 3 Block Data Sharing Process... 3 Hatch Boundary Search Improvement... 4 New and Enhanced Functionalities... 5 Table...
More informationCECOS University Department of Electrical Engineering. Wave Propagation and Antennas LAB # 1
CECOS University Department of Electrical Engineering Wave Propagation and Antennas LAB # 1 Introduction to HFSS 3D Modeling, Properties, Commands & Attributes Lab Instructor: Amjad Iqbal 1. What is HFSS?
More informationMULTICAx IGES Plug-in
MULTICAx IGES Plug-in Overview What's New User Tasks Requirements Methodologies and Advice Initializing the Environment Importing IGES Data Importing Part Files Interactively Translating Files from the
More information1 - Introduction Training Guide Objectives WorkXplore Environment Importing and Opening CAD Files 5
Table Of Contents 1.1 - Training Guide Objectives Table Of Contents 1 - Introduction 3 1.1 - Training Guide Objectives... 3 1.2 - WorkXplore Environment... 3 2 - Importing and Opening CAD Files 5 2.1 -
More information3D ModelingChapter1: Chapter. Objectives
Chapter 1 3D ModelingChapter1: The lessons covered in this chapter familiarize you with 3D modeling and how you view your designs as you create them. You also learn the coordinate system and how you can
More informationWhat s New Topics in 3.5.1: 1. User Interface 5. Reference Geometry 2. Display 6. Sketch 3. livetransfer 7. Surface / Solid 4. Scan Tools 8.
]^ New Release Turning Measured Points into Solid Models What s New Topics in 3.5.1: 1. User Interface 5. Reference Geometry 2. Display 6. Sketch 3. livetransfer 7. Surface / Solid 4. Scan Tools 8. Measure
More informationElectrical Harness Flattening
Electrical Harness Flattening Overview Conventions What's New? Getting Started Accessing the Electrical Harness Flattening Workbench Defining the Harness Flattening Parameters Extracting Data Flattening
More informationLesson: Static Stress Analysis of a Connecting Rod Assembly
Lesson: Static Stress Analysis of a Connecting Rod Assembly In this tutorial we determine the effects of a 2,000 pound tensile load acting on a connecting rod assembly (consisting of the rod and two pins).
More informationEducation Curriculum Surface Design Specialist
Education Curriculum Surface Design Specialist Invest your time in imagining next generation designs. Here s what we will teach you to give shape to your imagination. CATIA Surface Design Specialist CATIA
More informationWorking Environment. Environment Part 13,0600,1489,1598(SP6)
Working Environment Environment Part 13,0600,1489,1598(SP6) In this document, we will learn the Environment Part file. The part environment is the basic 3D cad environment for design and managing 3D CAD
More informationAutodesk Inventor Tips & Tricks Placing Features On
1 Autodesk Inventor Tips & Tricks Placing Features On Cylindrical Shapes The adoption of parametric, feature based solid modeling will present many challenges to the new user as they are confronted for
More informationTetra4D Reviewer. Version 2018 User Guide. Document version: V3.0. Tetra4D Reviewer 2018 Users Guide V3.0 1
Tetra4D Reviewer Version 2018 User Guide Document version: V3.0 Tetra4D Reviewer 2018 Users Guide V3.0 1 Table of Contents Chapter 1: Tetra4D Reviewer overview... 4 Tetra4D Reviewer application... 4 Tetra4D
More informationAssembly Modeling with SolidWorks For the Intermediate SolidWorks User. David C. Planchard & Marie P. Planchard SDC PUBLICATIONS
Supplemental Files on CD Assembly Modeling with SolidWorks 2006 For the Intermediate SolidWorks User David C. Planchard & Marie P. Planchard SDC PUBLICATIONS Schroff Development Corporation www.schroff.com
More informationKEYCREATOR 3D Direct Modeling Software
KeyCreator Lesson KC8192 Engraving Text on a Cylindrical Surface In this exercise we ll create a tool path to engrave text on a cylindrical surface. Start with a new file in view 2. (The Front View.) Click
More informationModule 4A: Creating the 3D Model of Right and Oblique Pyramids
Inventor (5) Module 4A: 4A- 1 Module 4A: Creating the 3D Model of Right and Oblique Pyramids In Module 4A, we will learn how to create 3D solid models of right-axis and oblique-axis pyramid (regular or
More informationSolidWorks 2015 User Interface
SolidWorks 2015 User Interface SolidWorks a Dassault Systèmes Product Starting SolidWorks 1) On the desktop, double-click or from the start menu select: All Programs SOLIDWORKS 2015 SOLIDWORKS 2015. 2)
More informationSWITCHING FROM SKETCHUP TO VECTORWORKS
SWITCHING FROM SKETCHUP TO VECTORWORKS INTRODUCTION There are a lot of 3D modeling software programs to choose from and each has its own strengths and weaknesses. For architects, flexibility and ease of
More informationCATIA Surface Design
CATIA V5 Training Exercises CATIA Surface Design Version 5 Release 19 September 2008 EDU_CAT_EN_GS1_FX_V5R19 Table of Contents (1/2) Creating Wireframe Geometry: Recap Exercises 4 Creating Wireframe Geometry:
More informationAutodesk Revit Structure Autodesk
Autodesk Revit Structure 2011 What s New Top Features Autodesk Revit Structure 2011 Software Enhanced Design Features Fit and Finish Slanted columns Beam systems and trusses Concrete clean-up Concrete
More informationTable of Contents Introduction... 1 Tutorial... 2
AppNote MG589468 A P P N O T E S SM FloTHERM V10.1 Upgrade Tutorial By: Akbar Sahrapour, Mechanical Division Analysis Last Modified: February 10, 2015 Table of Contents Introduction... 1 Tutorial... 2
More information128 - FEA Model Preparation using Solid Edge's Synchronous Technology
4 th Generation VLC courtesy of Edison2 128 - FEA Model Preparation using Solid Edge's Synchronous Technology Kevin Baxter, Consultant Page 1 #SEU13 Agenda: 128 - FEA Model Preparation using Solid Edge's
More informationBobCAD CAM V25 4 Axis Standard Posted by Al /09/20 22:03
BobCAD CAM V25 4 Axis Standard Posted by Al - 2012/09/20 22:03 Many BobCAD CAM clients that run a 4 axis have requested to work directly with Solids or STL files. In the past we only offered 4 axis indexing
More informationDesign smarter with powerful, easy-to-use 3D CAD solutions
Creo Parametric Essentials Packages Design smarter with powerful, easy-to-use 3D CAD solutions PTC s 3D CAD product design solution, Creo Parametric, gives you the right tools to achieve the highest quality
More informationProject 3. Top Down Design In Context. Below are the desired outcomes and usage competencies based upon the completion of this Project.
Assembly Modeling with SolidWorks Project 3 Below are the desired outcomes and usage competencies based upon the completion of this Project. Project Desired Outcomes: 2AXIS-TRANSFER Assembly. PLATE-B Part.
More informationWorking with Neutral Format Surface and Solid Models in Autodesk Inventor
Working with Neutral Format Surface and Solid Models in Autodesk Inventor JD Mather Pennsylvania College of Technology Session ID ML205-1P In this class we will learn how to utilize neutral format data
More informationProblem description. It is desired to analyze the cracked body shown using a 3D finite element mesh: Top view. 50 radius. Material properties:
Problem description It is desired to analyze the cracked body shown using a 3D finite element mesh: Top view 30 50 radius 30 Material properties: 5 2 E = 2.07 10 N/mm = 0.29 All dimensions in mm Crack
More informationAutoCAD 2009 User InterfaceChapter1:
AutoCAD 2009 User InterfaceChapter1: Chapter 1 The AutoCAD 2009 interface has been enhanced to make AutoCAD even easier to use, while making as much screen space available as possible. In this chapter,
More information1. WELDMANAGEMENT PRODUCT
Table of Contents WeldManagement Product.................................. 3 Workflow Overview........................................ 4 Weld Types.............................................. 5 Weld
More informationAutoCAD for Engineers and Designers, 21st Edition. (3D and Advanced)
AutoCAD 2015 for Engineers and Designers, 21st Edition (3D and Advanced) CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor
More informationTop 10 Productivity Tips in Fusion 360
CP11251 Top 10 Productivity Tips in Fusion 360 Taylor Stein Autodesk Inc. Learning Objectives Learn how to speed up Fusion 360 workflows Learn how to make your selections even easier Learn important best
More informationChapter 2 Parametric Modeling Fundamentals
2-1 Chapter 2 Parametric Modeling Fundamentals Create Simple Extruded Solid Models Understand the Basic Parametric Modeling Procedure Create 2-D Sketches Understand the "Shape before Size" Approach Use
More informationWorking with Plan Production ObjectsChapter1:
Chapter 1 Working with Plan Production ObjectsChapter1: The lessons in this chapter guide you through the processes of creating and working with plan production objects. Plan production objects include
More informationModule 4B: Creating Sheet Metal Parts Enclosing The 3D Space of Right and Oblique Pyramids With The Work Surface of Derived Parts
Inventor (5) Module 4B: 4B- 1 Module 4B: Creating Sheet Metal Parts Enclosing The 3D Space of Right and Oblique Pyramids With The Work Surface of Derived Parts In Module 4B, we will learn how to create
More informationTechnical Education Services
Autodesk Fusion 360: Introduction to Parametric Modeling Course Length: 3 days Official Training Guide The Autodesk Fusion 360 Introduction to Parametric Modeling training course provides you with an understanding
More informationDWG/DXF Export. Some attribute values in blocks weren't exporting correctly.
DesignCAD 3D Max 20.1 Release Notes Nov. 9, 2010 DesignCAD 3D Max 20.1 introduces the following fixes and changes: DWG/DXF Export. Sometimes arcs and elliptical arcs, when exported to dwg or dxf format,
More informationReaping the Benefits of Migrating to Autodesk Building Systems
Intro. 1 BD23-3 Reaping the Benefits of Migrating to Autodesk Building Systems Presenter(s) Daryl Bookout & Mike Kotanian Standards Annotation Existing Symbology Content Creation Labels Display Configurations
More informationAutodesk Inventor 2016
Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationModule 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
More informationTRAINING GUIDE SOLIDS-LESSON-3
TRAINING GUIDE SOLIDS-LESSON-3 Mastercam Training Guide Objectives You will generate the solid model from the existing 2-dimensional geometry. This Lesson covers the following topics: Open an existing
More information