1. Create a map of the layer and attribute that needs to be queried
|
|
- Leslie Robbins
- 5 years ago
- Views:
Transcription
1 Single Layer Query 1. Create a map of the layer and attribute that needs to be queried 2. Choose the desired Select Type. This can be changed from the Map menu at the far top or from the Select Type Icon in the Map Toolbar. (see page for select type definitions) 3. Now choose a selection tool from the Map menu or by clicking on the Select Tools Icon on the Map toolbar. (see page for definitions of the select tools) 4. Now make a selection on your map using the Select Type and Tool that was picked in the previous steps. 5. After the selection is made go to the Map menu and select Query Tools and then click Query Current Layer or click on the Query Current Layer icon on the Map Tool Bar. 6. The query result will appear in a window that is inside the Map window, labeled Query Results. To clear out the results window select the Clear Query Results icon from the Query Results window. Related Tutorial: oht6aqu7nkof2xi0xcug9fgegiyv2d 1
2 Multiple Layer Query 1. Click on one map from you tree and create a new map. Select a second layer and click add to current map. An example would be if you wanted to query yield by variety. Select the grain harvest layer and create a map of it and then add the planting to it by using add to current map. Make sure to change the attributes on the maps. From the example you would use Yield Dry and Product Name. 2. Choose the desired select type. This can be changed from the Map menu at the far top or from the select type icon in map tool bar. (see page for select type definitions) 3. Now choose a selection tool from the Map menu or by clicking on the select tools icon on the map toolbar. (see page for definitions of the select tools) 4. After the selection is made go to the Map menu and select Query tools and then click on Query Multiple Layers or click on the Query Multiple Layers icon from the Map Tool Bar. If you do not want to include all of the layers in the query then unselect them in the Selected Query Layers box before running the Multiple Layer Query. 5. The query result will appear in a window that is inside the Map window, labeled Query Results. To clear out the results window select the Clear Query Results icon from the Query Results window. Related Tutorial: Select Type 2
3 The selection type determines how any shape (point, line, or polygon) in a layer is selected. The selection types can be found in the Map menu or on the Map screen in the mapping toolbar. Select Objects When this option is used, entire objects will be selected by any of the Selection Tools. For example if the Select Rectangle tool is selected and a selection box that crosses the edge of a polygon in a layer is drawn, the whole polygon will be selected not just the intersected area. 3
4 Select Intersection When this option is used, only the intersected area of an object is selected. For example, if the Select Rectangle polygon is selected and a region is drawn across a quarter of a line segment, then only that length of the line that fell in the selection area will be selected. Select Tools 4
5 The Select Tools are used to select objects from a layer. The selection tools can be found in the Map menu or on the Map screen in the mapping toolbar. The Select Tools are used to select objects from a layer. The selection tools can be found in the Map menu or on the Map screen in mapping toolbar. Select Point - Click this button to use the cursor to select an individual object in a layer. By holding the Ctrl key, multiple objects can be selected within the displayed layer. Select Rectangle - Click this button to draw a rectangular region and select all of the objects that fall within the selection rectangle. By holding the Ctrl key, multiple objects can be selected within the displayed layer. Select Polygon - Click this button to draw a polygon region and select all of the objects that fall within the selection polygon. A left-click on the mouse will insert a vertex for the selection polygon, while a right-click will finalize the polygon. By holding the Ctrl key, multiple objects can be selected within the displayed layer. Select Circle - Click this button to draw a circular region and select all of the objects that fall within the selection circle. By holding the Ctrl key, multiple objects can be selected within the displayed layer. Select Ellipse - Click this button to draw an elliptical region and select all of the objects that fall within the selection ellipse. By holding the Ctrl key, multiple objects can be selected within the displayed layer. Select Pass - Click this button to select a pass. This tool will only work correctly for point or smart rectangle map types where a header sensor or implement switch was used while collecting the data. By holding the Ctrl key, multiple passes can be selected within the displayed layer 5
6 6
Drawing Tools. Drawing a Rectangle
Chapter Microsoft Word provides extensive DRAWING TOOLS that allow you to enhance the appearance of your documents. You can use these tools to assist in the creation of detailed publications, newsletters,
More informationGenerating Vectors Overview
Generating Vectors Overview Vectors are mathematically defined shapes consisting of a series of points (nodes), which are connected by lines, arcs or curves (spans) to form the overall shape. Vectors can
More informationPaint Tutorial (Project #14a)
Paint Tutorial (Project #14a) In order to learn all there is to know about this drawing program, go through the Microsoft Tutorial (below). (Do not save this to your folder.) Practice using the different
More informationWAIPA DISTRICT COUNCIL. Maps Online 9. Updated January This document contains an overview of IntraMaps/Maps Online version 9.
WAIPA DISTRICT COUNCIL Maps Online 9 Updated January 2018 This document contains an overview of IntraMaps/Maps Online version 9.0 Contents Starting Maps Online... 3 Menu Bar... 4 Tools... 5 View Tab...
More informationUndo Button Clicking this tool will undo the last action. Clicking on this tool multiple times will undo all subsequent changes that were made.
SMS Featured Icons: Editor Window This document includes a brief description of the tools in the SMS Desktop Software Editor windows, as well as showing you the toolbar shortcuts to easily access these
More informationDC2 File Format. 1. Header line 2. Entity line 3. Point line 4. String line
DC2 File Format The DesignCAD DC2 drawing file is an ASCII file, with the data present in character format. Each "record" in the file is actually a line in a text file. There are four types of records,
More informationMinimal AutoCAD 2011
PDHonline Course G371 (2 PDH) Minimal AutoCAD 2011 Instructor: Thomas Mason, P.E. 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.pdhonline.org
More informationHow to access other maps when viewing or editing a map
How to access other maps when viewing or editing a map When you're viewing a map, you can also view and access other maps by clicking the Map Views in the upper right corner: The drop-down list in the
More informationMosaic Tutorial: Advanced Workflow
Mosaic Tutorial: Advanced Workflow This tutorial demonstrates how to mosaic two scenes with different color variations. You will learn how to: Reorder the display of the input scenes Achieve a consistent
More informationUsing Graphing Questions in WileyPLUS
Using Graphing Questions in WileyPLUS Introduction The Graphing question type in WileyPLUS uses Flash-based tools enabling students to draw and manipulate graphing objects, in order to answer a particular
More informationGRIPS EDITING. Centrally-located grips tend to move the entity. Peripherally-located grips tend to stretch the entity.
52 GRIPS EDITING Grips editing is the kind of editing you may be familiar with from other drawing programs. It starts when no command is active, and you select one or more entities by picking them with
More informationMET 107 Drawing Tool (Shapes) Notes Day 3
MET 107 Drawing Tool (Shapes) Notes Day 3 Shapes: (Insert Tab Shapes) Example: Select on the rounded rectangle Then use the mouse to position the upper left corner and produce the size by dragging out
More informationTechnique or Feature Where Introduced
Part 6: Keypad 4 Mirrored features Patterned features First extrusion Rounded corners In the earpiece part, you defined a radial pattern, one that created new instances of a feature at intervals around
More informationDesignWorks- CrystalWork Skillbuilder
DesignWorks- CrystalWork Skillbuilder Crystal Shapes & Fills The following exercise will cover the basics of filling and editing a Crystal shape. For detailed CrystalWork software instructions, review
More informationSolidWorks 2013 and Engineering Graphics
SolidWorks 2013 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following
More informationTower Drawing. Learning how to combine shapes and lines
Tower Drawing Learning how to combine shapes and lines 1) Go to Layout > Page Background. In the Options menu choose Solid and Ghost Green for a background color. This changes your workspace background
More informationADOBE TRAINING CS6 PHOTOSHOP BASICS: EDITING PHOTOS & WORKING WITH TEXT - 1
ADOBE TRAINING CS6 PHOTOSHOP BASICS: EDITING PHOTOS & WORKING WITH TEXT Photoshop is the leading professional software for editing and adjusting photos, images and other graphic projects. It is a very
More informationDigitizing and Editing Polygons in the STS Gypsy Moth Project. M. Dodd 2/10/04
Digitizing and Editing Polygons in the STS Gypsy Moth Project M. Dodd 2/10/04 Digitizing and Editing Polygons in the STS Gypsy Moth Project OVERVIEW OF DIGITIZING IN STS 3 THE DIGITIZING WINDOW 4 DIGITIZING
More informationHow to do a Property Search
How to do a Property Search A Self-Tutorial GIS Services 1401 Marina Way South Richmond, CA 94804 Tel: (510) 621-1298 Fax: (510) 307-8116 1. Navigate to the GIS Mapping Services page. 2. The mapping services
More informationMn/DOT MnCMAT Crash Analysis Application Help
Mn/DOT MnCMAT Crash Analysis Application Contents Login... 5 User Login Dialog... 5 Login... 5 Request Access Dialog... 5 Forgotten Password Dialog... 6 Create/Open Project... 7 Create/Open Project Dialog...
More informationCreating or enlarging a hole in the center of a kaleidoscope (Paint Shop Pro)
TM Kaleidoscope Kreator Tutorial Series Creating or enlarging a hole in the center of a kaleidoscope (Paint Shop Pro) There may be times when you want to create (or enlarge) a hole in the center of a kaleidoscope:
More informationLesson 2 Constructive Solid Geometry Concept. Parametric Modeling with I-DEAS 2-1
Lesson 2 Constructive Solid Geometry Concept Parametric Modeling with I-DEAS 2-1 2-2 Parametric Modeling with I-DEAS Introduction In the 1980s, one of the main advancements in Solid Modeling was the development
More informationSolar Car. Chassis. in the Feature Manager and click Sketch from the Content toolbar, Fig. 2. Origin. on the Command Manager toolbar. Fig.
Chapter 1 A. New Part. Step 1. Click File Menu > New. Solar Car Chassis Step 2. Click Part from the list and click OK, Fig. 1. B. Sketch Chassis. Step 1. Click Right Plane in the Feature Manager and click
More informationFuselage and Sharks Tooth
Chapter 4 Glider Fuselage and Sharks Tooth A. Save as "FUSELAGE". Step 1. Open your FUSELAGE BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in FUSELAGE for the filename and press ENTER. B.
More informationA Study of Angles & Curves
A Study of Angles & Curves Method 1: Cutting Quilt Shapes/Using the Shapes Tools Open BERNINA CutWork Software. Make sure that Create New is selected. Click Next. Place a dot in front of New Graphic. Select
More informationVarioAnalyze. User Manual. JENOPTIK Group.
VarioAnalyze User Manual JENOPTIK Group. Dear User Dear User You should carefully read these instructions before you start operating the VarioAnalyze Software. Editorial deadline: October 2005 Document
More informationLayers (Just the Basics) By Jerry Koons
and their applications are always a topic of concern and confusion, especially to those that are new to the Photoshop and Elements programs. will become one of your best tools after you understand their
More informationPhotocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
SketchUp Level of Difficulty Time Approximately 15 20 minutes Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
More informationLesson 6 Adding Graphics
Lesson 6 Adding Graphics Inserting Graphics Images Graphics files (pictures, drawings, and other images) can be inserted into documents, or into frames within documents. They can either be embedded or
More informationFull Search Map Tab. This map is the result of selecting the Map tab within Full Search.
Full Search Map Tab This map is the result of selecting the Map tab within Full Search. This map can be used when defining your parameters starting from a Full Search. Once you have entered your desired
More informationRHINO SURFACE MAKING PART 1
TUTORIAL 04: RHINO SURFACE MAKING PART 1 By Jeremy L Roh, Professor of Digital Methods I UNC Charlotte s School of Architecture Surfaces are a key component in shaping 3D objects within Rhinoceros. All
More informationReset Cursor Tool Clicking on the Reset Cursor tool will clear all map and tool selections and allow tooltips to be displayed.
SMS Featured Icons: Mapping Toolbar This document includes a brief description of some of the most commonly used tools in the SMS Desktop Software map window toolbar as well as shows you the toolbar shortcuts
More informationFixed Perimeter Rectangles Geometry Creating a Document
Activity Overview: This activity provides the steps to create a TI-Nspire document that will be used to investigate side length and area in a rectangle with a fixed perimeter. An algebraic approach is
More informationObjectives This tutorial demonstrates how to use feature objects points, arcs and polygons to make grid independent conceptual models.
v. 9.0 GMS 9.0 Tutorial Use points, arcs and polygons to make grid independent conceptual models Objectives This tutorial demonstrates how to use feature objects points, arcs and polygons to make grid
More informationSOLIDWORKS 2016 and Engineering Graphics
SOLIDWORKS 2016 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationFILE MENU New Starts a New Blank Canvas Open- Allows you to import designs into the program. Close- Closes the current Design
1 Quick Start Guide This guide is intended to give you an overview of the function of the program. The guide is arranged by section, Each section corresponds to the different pulldown menus in the program.
More informationCreate Geomark in Google Earth Tutorial
Create Geomark in Google Earth Tutorial General business example a potential applicant / user wants to create an area of interest that can be shared electronically to another party eg: another agency,
More informationCOGCC GIS Online Map Instructions - Internet Site April 10, 2018
COGCC GIS Online Map Instructions - Internet Site April 10, 2018 Table of Contents Page Section Page Section 1 Introduction 8 Clear Selection 2 Double Click 8 Buffer 3 Arrow Tip Information 9 Select within
More informationThis is the opening view of blender.
This is the opening view of blender. Note that interacting with Blender is a little different from other programs that you may be used to. For example, left clicking won t select objects on the scene,
More informationSkateboard. Hanger. in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. Fig. 2
Chapter 3 Skateboard Hanger A. Sketch1 Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Right Plane in the Feature Manager and click Sketch on the Context toolbar, Fig. 1.
More informationGraphWorX64 Productivity Tips
Description: Overview of the most important productivity tools in GraphWorX64 General Requirement: Basic knowledge of GraphWorX64. Introduction GraphWorX64 has a very powerful development environment in
More information4.G.1. Name Date. Geometry. Use the figure below to answer questions Draw an intersecting line through the line below. E H
Name Date ssessment 1 4.G.1 questions 1-3. 5. Draw an intersecting line through the line below. E H B C D G F 6. Draw a perpendicular line through the set of lines below. 1. Name a pair of parallel lines.
More informationWAITOMO DISTRICT COUNCIL ONLINE MAPS. Updated June This document contains an overview of Waitomo District Council Online Maps
WAITOMO DISTRICT COUNCIL ONLINE MAPS V8 Updated June2017 - This document contains an overview of Waitomo District Council Online Maps Table of Contents Starting Online Maps... 3 Main Screen... 4 Menu Bar...
More information3D FeatureXtract Simple Building Extraction
3D FeatureXtract Simple Building Extraction 3D FeatureXtract is an all-in-one complex feature extraction and 3D modeling software system developed with the defined objective of improving the process workflow
More informationUsing Syracuse Community Geography s MapSyracuse
Using Syracuse Community Geography s MapSyracuse MapSyracuse allows the user to create custom maps with the data provided by Syracuse Community Geography. Starting with the basic template provided, you
More informationInsight: Measurement Tool. User Guide
OMERO Beta v2.2: Measurement Tool User Guide - 1 - October 2007 Insight: Measurement Tool User Guide Open Microscopy Environment: http://www.openmicroscopy.org OMERO Beta v2.2: Measurement Tool User Guide
More informationGeoWeb Portal. User Manual
GeoWeb Portal User Manual Purpose The GeoWeb Portal (GWP) is a map viewing and publishing site. It is designed to allow people to build their own maps and review the data that is attached to the elements
More informationVizit Pro User Manual
Vizit Pro User Manual 1 Table of Contents Vizit Pro User Manual... 1 Using Vizit Pro... 3 The Vizit Pro User Interface... 3 Toolbars... 4 File Tab Toolbar... 4 Edit Tab Toolbar... 5 Annotations Tab Toolbar...
More informationHelp Guide Rev
Help Guide Rev. 1.0 07152014 Home Page The home page displays your vehicle(s) on a satellite map. The information box, showing vehicle information will already be opened. The information box displays your
More informationVHSE - COMPUTERISED OFFICE MANAGEMENT MODULE III - Communication and Publishing Art - PageMaker
INTRODUCTION : It is one Adobe PageMaker 7.0 software is the ideal page layout program for business, education, and small- and home-office professionals who want to create high-quality publications such
More informationCUSTOMISE FIELDS AND LAYOUTS 2010
CUSTOMISE FIELDS AND LAYOUTS 2010 CUSTOMIZE YOUR FIELDS AND LAYOUTS Step 1 Define your fields Step 2 Customize your layouts Note: Changing the name of a field in the Define Fields box does not change the
More informationAGENDA: Using Gizmos to Modify 3D Models. AutoCAD 3 LECTURE NOTES: CLASS 08. Using Gizmos to Modify 3D Models
AGENDA: Using Gizmos to Modify 3D Models Using Gizmos to Modify 3D Sub-Objects and Faces 3DArray, Mirror3D, and Align Using Gizmos to Modify 3D Models Gizmos allow us to move, rotate, and scale a set of
More informationMotic Images Plus 3.0 ML Software. Windows OS User Manual
Motic Images Plus 3.0 ML Software Windows OS User Manual Motic Images Plus 3.0 ML Software Windows OS User Manual CONTENTS (Linked) Introduction 05 Menus and tools 05 File 06 New 06 Open 07 Save 07 Save
More informationLearning Photoshop Elements Step-by-step Lesson Two
Learning Photoshop Elements Step-by-step Lesson Two Layers and Shapes Overview The power and flexibility of Photoshop lies in its layers. Before students get started using Elements in integrated projects,
More informationAutodesk Inventor 2019 and Engineering Graphics
Autodesk Inventor 2019 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
More informationXPEL DAP SUPPORT. DAP Tool List & Overview DESCRIPTION ICON/TOOL (SHORTCUT)
Pointer (S) Left-click on individual entities to add them to the current selection (selected entities will turn red). If the entity selected is a member of a group, the entire group will be added to the
More informationDraw Guide. Chapter 2 Drawing Basic Shapes
Draw Guide Chapter 2 Drawing Basic Shapes Copyright This document is Copyright 2005 2011 by its contributors as listed below. You may distribute it and/or modify it under the terms of either the GNU General
More informationModule 7 Creating a Mesh in AutoCAD and Importing it into Plate n Sheet
Module 7 Creating a Mesh in AutoCAD and Importing it into Plate n Sheet Page 1 Imported Surface Mesh A surface mesh can be imported from AutoCAD. It may be selected directly from the AutoCAD screen (full
More informationMEMS Pro V3 Layout Tutorial
MEMS Pro V3 Layout Tutorial MEMSCAP Yiching Liang March 6, 2002 Launching MEMS Pro V3 Double click on the MEMS Pro V3 icon on your desktop to launch MEMS Pro Menu bar Standard toolbar Drawing toolbar SPR/BPR
More informationGETTING STARTED TABLE OF CONTENTS
Sketchup Tutorial GETTING STARTED Sketchup is a 3D modeling program that can be used to create 3D objects in a 2D environment. Whether you plan to model for 3D printing or for other purposes, Sketchup
More informationTYPE EDIT V12. Tutorial 03. Multicopy to create a set of medals COPYRIGHT 2014 GRAVOTECH MARKING SAS ALL RIGHTS RESERVED
TYPE EDIT V12 Multicopy to create a set of medals COPYRIGHT 2014 GRAVOTECH MARKING SAS ALL RIGHTS RESERVED Multicopy to create a set of medals Creation Time : 45 minutes Level : Intermediate Module : TypeEdit
More informationCode Finix Label Designer V 1.0 User Guide
Code Finix Label Designer V 1.0 User Guide Introduction Welcome, Code Finix Label Designer is a family of professional labeling software products that brings a complete barcode printing solution for desktop
More informationDraw Guide. Chapter 2 Drawing Basic Shapes
Draw Guide Chapter 2 Drawing Basic Shapes Copyright This document is Copyright 2005 2012 by its contributors as listed below. You may distribute it and/or modify it under the terms of either the GNU General
More informationAutodesk Inventor - Basics Tutorial Exercise 1
Autodesk Inventor - Basics Tutorial Exercise 1 Launch Inventor Professional 2015 1. Start a New part. Depending on how Inventor was installed, using this icon may get you an Inch or Metric file. To be
More informationAdobe Photoshop How to Use the Marquee Selection Tools
Adobe Photoshop How to Use the Marquee Selection Tools In Photoshop there are various ways to make a selection and also various reasons why you'd want to make a selection. You may want to remove something
More informationUniversity of Bahrain College of Applied Studies
University of Bahrain College of Applied Studies CSA 212: Human Interface and Design Activity 5: Front page 2003 Name : Student ID No : Section Instructor : : Demonstrator : Date : Total Marks : 10 Marks
More informationHow to Annotate Documents in BDM. Banner Document Management (BDM)
(BDM) How to Annotate Documents in BDM 1 Table of Contents 1. Overview 3 2. Adding Annotations 4 3. Adding Redactions 6 2 1. Overview An Annotation is a note or a shape added to a page by a BDM user, typically
More informationModule 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
More informationArea of Interest (AOI) to KML
Area of Interest (AOI) to KML The Integrated Land & Resource Registry (ILRR) offers a bit more functionality for Keyhole Markup Language (KML) creation and usage than Mineral Titles Online (MTO). Both
More informationPropeller. Chapter 13. Airplane. A. Base for Blade. Step 1. Click File Menu > New, click Part and OK.
Chapter 13 Airplane Propeller A. Base for Blade. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch toolbar, Fig. 1. from the Content Step
More informationCity of La Crosse Online Mapping Website Help Document
City of La Crosse Online Mapping Website Help Document This document was created to assist in using the new City of La Crosse online mapping sites. When the website is first opened, a map showing the City
More informationGlider. Wing. Top face click Sketch. on the Standard Views. (S) on the Sketch toolbar.
Chapter 5 Glider Wing 4 Panel Tip A. Open and Save As "WING 4 PANEL". Step 1. Open your WING BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in WING 4 PANEL for the filename and press ENTER.
More informationTutorial 3: Constructive Editing (2D-CAD)
(2D-CAD) The editing done up to now is not much different from the normal drawing board techniques. This section deals with commands to copy items we have already drawn, to move them and to make multiple
More information5Using Drawings, Pictures. and Graphs. Drawing in ReportSmith. Chapter
5Chapter 5Using Drawings, Pictures Chapter and Graphs Besides system and custom report styles, ReportSmith offers you several means of achieving variety and impact in your reports, by: Drawing objects
More informationME009 Engineering Graphics and Design CAD 1. 1 Create a new part. Click. New Bar. 2 Click the Tutorial tab. 3 Select the Part icon. 4 Click OK.
PART A Reference: SolidWorks CAD Student Guide 2014 2 Lesson 2: Basic Functionality Active Learning Exercises Creating a Basic Part Use SolidWorks to create the box shown at the right. The step-by-step
More informationConstraint Based Modeling Geometric and Dimensional. ENGR 1182 SolidWorks 03
Constraint Based Modeling Geometric and Dimensional ENGR 1182 SolidWorks 03 Today s Objectives Using two different type of constraints in SolidWorks: Geometric Dimensional SW03 In-Class Activity List Geometric
More informationFrontCounter BC Discovery Tool Instructions. NOTE: You must have Google Earth installed to use this tool.
NOTE: You must have Google Earth installed to use this tool. These instructions are written for use with a Microsoft Windows Work Station. This tutorial will step you through navigating to and viewing
More information2. MODELING A MIXING ELBOW (2-D)
MODELING A MIXING ELBOW (2-D) 2. MODELING A MIXING ELBOW (2-D) In this tutorial, you will use GAMBIT to create the geometry for a mixing elbow and then generate a mesh. The mixing elbow configuration is
More informationGstarCAD Complete Features Guide
GstarCAD 2017 Complete Features Guide Table of Contents Core Performance Improvement... 3 Block Data Sharing Process... 3 Hatch Boundary Search Improvement... 4 New and Enhanced Functionalities... 5 Table...
More informationCADAM Drafting Hints and Tips
CADAM Drafting Hints and Tips Editing Associative Dimensions: Circles: You can globally associate all dimensions with their referenced geometry. That means you can import an unintelligent drawing using
More informationThe Rectangular Problem
C h a p t e r 2 The Rectangular Problem In this chapter, you will cover the following to World Class standards: The tools for simple 2D Computer Aided Drafting (CAD) The Command Line and the Tray The Line
More informationSOLIDWORKS: Lesson III Patterns & Mirrors. UCF Engineering
SOLIDWORKS: Lesson III Patterns & Mirrors UCF Engineering Solidworks Review Last lesson we discussed several more features that can be added to models in order to increase their complexity. We are now
More information3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
More informationChapter 10 Test Review
Name: Class: Date: Chapter 10 Test Review Short Answer 1. Write an equation of a parabola with a vertex at the origin and a focus at ( 2, 0). 2. Write an equation of a parabola with a vertex at the origin
More informationSelecting by Attributes and Location in ArcGIS Pro
Chapter 7 Selecting by Attributes and Location in ArcGIS Pro Skills you will learn: This tutorial covers selecting features in ArcGIS Pro. If you are unfamiliar with the basics of the ArcGIS Pro user interface,
More informationUsing Object Snap to Draw a Rug Design
Using Object Snap to Draw a Rug Design The objective of the rest of this tutorial is to learn the use of object snap and hatch. Because AutoCAD is based on vectors and coordinate geometry, it can easily
More informationFlexMLS Maps Quick Reference Guide
FlexMLS Maps Quick Reference Guide Full Search Map Tab Features Define Search Areas box Map tab in Full Search Radius Search tool from an address Show/Hide Property List, Locate Address, and Define Search
More informationChapter 12: Pull Toy - Solids and Transforms
This tutorial demonstrates using solid primitives and simple transforms. You will learn how to: Enter coordinates to place points exactly. Draw a free-form curve and polygon. Create a pipe along a curve.
More informationAdobe PageMaker Tutorial
Tutorial Introduction This tutorial is designed to give you a basic understanding of Adobe PageMaker. The handout is designed for first-time users and will cover a few important basics. PageMaker is a
More informationBC Spatial Member Map Viewer. Version 2.0. User Guide. May 2015
BC Spatial Member Map Viewer Version 2.0 User Guide May 2015 1 P a g e Revised: 16 June 2015 Contents Contents... 2 Introduction... 4 System Requirements... 5 BC Spatial Map Viewer... 6 I. Navigation Tools...
More informationTrace Bitmap. Chapter 7. A. Page Size. Step 1. Click File Menu > New (Ctrl-N).
Chapter 7 Trace Bitmap Riverview Rams Sarasota High Booker High A. Page Size. Step 1. Click File Menu > New (Ctrl-N). Step 2. Set page size in the Property bar: Width to 3.2 Fig. 1 Height to 2 Step 3.
More informationCreating a Text Frame. Create a Table and Type Text. Pointer Tool Text Tool Table Tool Word Art Tool
Pointer Tool Text Tool Table Tool Word Art Tool Picture Tool Clipart Tool Creating a Text Frame Select the Text Tool with the Pointer Tool. Position the mouse pointer where you want one corner of the text
More informationcreate 2 new grid lines
STEP 1: open your class-01 Project file _ go to Level 1 _ select grid line 1 _ type CO (copy) _ repeat for grid line 3 as shown in image 1 Architectural Column STEP 2: from the Ribbon under the Home tab
More informationLesson 5 Solid Modeling - Constructive Solid Geometry
AutoCAD 2000i Tutorial 5-1 Lesson 5 Solid Modeling - Constructive Solid Geometry Understand the Constructive Solid Geometry Concept. Create a Binary Tree. Understand the basic Boolean Operations. Create
More informationPress the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.
Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also
More informationDraw Guide. Chapter 3 Working with Objects and Object Points
Draw Guide Chapter 3 Working with Objects and Object Points Copyright This document is Copyright 2005 2011 by its contributors as listed below. You may distribute it and/or modify it under the terms of
More informationCreating and editing vector maps
Software PHOTOMOD Module PHOTOMOD VectOr Creating and editing vector maps Racurs, Moscow, 2009 PHOTOMOD CONTENTS 1. GENERAL PURPOSE OF VECTOR MAP EDITOR... 3 2. VECTOR MAP EDITOR MANAGING.... 3 3. ADDING
More informationNose Cone. Chapter 4. Rocket 3D Print. A. Revolve. Step 1. Click File Menu > New, click Part and OK. SOLIDWORKS 16 Nose Cone ROCKET 3D PRINT Page 4-1
Chapter 4 Rocket 3D Print Nose Cone A. Revolve. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the content toolbar, Fig. 1. Step
More informationCustom Shapes As Text Frames In Photoshop
Custom Shapes As Text Frames In Photoshop I used a background for this activity. Save it and open in Photoshop: Select Photoshop's Custom Shape Tool from the Tools panel. In the custom shapes options panel
More informationTo Select a Tool: Persistence of Tools. Tools. New Graphic Tool. Do one of the following: Click a tool icon on the palette.
Visualization and Graphics 119 To Select a Tool: Do one of the following: Click a tool icon on the palette. With a graphic selected, type one of these letters: o, p, f, l, s, a, g, c, q, m, t Persistence
More information