Nickel Plated BSP & Hose Fittings

Transcription

1 Nicke Pated SP & Hose ittings M3, M5, 1 8" 1 1 2" SP Suitabe for use in most genera industria appications right nicke pated brass ompact design Reiabe and corrosion resistant Washers incuded where necessary Technica ata Medium: ompressed air or any fuids compatibe with the materias isted beow Operating Pressure and Temperature: eneray imited by tubing specification except where pastic seaing washers are used (anjo bots M3 & M5 units). In these cases temperature imited to +70, pressure imited to 18 bar. Suitabe for vacuum appications. ow reguating banjos are imited to 1-10 bar operating range Ordering Information To order, quote appropriate product number from the tabes on the foowing pages. M3, M5, 1 8", 1 4", 3 8", 1 2", 3 4", 1", 1 1 4", 1 1 2" SP s Materias ar parts brass to S 2874: 1986 (Z121), bright nicke pated. Stamped parts brass to S 2872: 1969 (Z122), bright nicke pated. opper seaing washers (nyon for M3 & M5 units and banjo 08/97 N/L

2 Nicke Pated SP & Hose ittings Straight daptors and onnectors ULKH ONNTOR SLV PTOR femae SPP NIPPL PTOR mae SPP NIPPL PTOR mae SPT SP ONNTOR reducer mae x femae SP ONNTOR expander mae x femae PTOR femae NPT to mae SPT U PTOR femae SPP to mae NPT HXON NIPPL mae NPT to mae SPT SP ONNTOR reducer - mae SPT x femae SPP SP ONNTOR expander - mae SPT x femae SPP PLU mae SPP PLU mae SPT HOS PTOR metric I/ hose bore x mae SPT Page HOS PTOR imperia I/ hose bore x mae SPT HOS PTOR metric I/ hose bore x mae SPP SWIVL HOS PTOR imperia I/ x femae SPP HOS ONNTOR imperia Page Page Page bow onnectors and daptors LOW 2 x femae SPP LOW mae SPT x femae SPP LOW 2 x mae SPT LOW NO SSMLY non reguating bot LOW NO SSMLY reguating out K51 Tee onnectors and daptors T 3 x femae SPP T 3 x mae SPT T 2 x femae SPT x mae SPP eg ROSS 4 x femae SPP anjo odies and ots LOW NO OY NO OLT non reguating singe stacking 2000 NO OLT non reguating doube stacking 2000 NO OLT reguating singe stacking SP parae 20K00 MNIOL singe sided LOKNUT metric LOKNUT inch LT UNION TPR PLU with interna hexagon N/L /97

3 Nicke Pated SP & Hose ittings ukhead onnector Seeve - emae SPP Product SPP metric number femae mae / max M5x0,8 M10x1,0 14,0 14 3,5 7, " M16x1,5 18,0 22 4,0 10, " M20x1,5 25,0 27 4,0 16, " M26x1,5 26,0 32 5,0 15, " M28x1,5 33,0 36 6,0 21, " M33x1,5 36,5 41 6,0 22, " M42x1,5 41,5 46 8,0 24, " M48x1,5 50,0 55 8,0 29,5 Suppied compete with ocknut Product SPP SPP number femae femae / M5x0,8 M5x0,8 11, " M5x0,8 13,0 14 7, " 1 8" 15, " 1 8" 19,0 17 9, " 1 4" 22, " 1 8" 20, , " 1 4" 23, , " 3 8" 24, " 1 8" 24, , " 1 4" 25, , " 3 8" 27, , " 1 2" 30, " 1 2" 30, , " 3 4" 32, " 3 4" 41, " 1" 45, Nippe Mae SPP Nippe Mae SPT 1 Product SPP SPP 1 S number mae mae / M5x0,8 M5x0,8 11,5 8 4,0 4,0 2, " M5x0,8 14,5 14 6,0 4,0 2, " 1 8" 16,5 14 6,0 6,0 5, " 1 8" 19,0 17 8,0 6,0 5, " 1 4" 21,0 17 8,0 8,0 8, " 1 4" 22,0 19 9,0 8,0 8, " 3 8" 23,0 19 9,0 9,0 11, " 1 4" 23, ,0 8,0 8, " 3 8" 24, ,0 9,0 11, " 1 2" 25, ,0 10,0 15, " 1 2" 27, ,0 10,0 15, " 3 4" 53, ,7 14,7 18, " 1 2" 56, ,5 13,4 14, " 3 4" 58, ,5 14,7 18, " 1" 60, ,5 17,5 25,0 Suppied with seaing washers 1 Product SPT SPT 1 S number mae mae / min " 1 8" 19,5 12 7,5 7,5 5, " 1 8" 23, ,0 7,5 5, " 1 4" 27, ,0 11,0 6, " 1 8" 24, ,5 7,5 5, " 1 4" 27, ,5 11,0 8, " 3 8" 28, ,5 11,5 11, " 1 8" 27, ,0 7,5 5, " 1 4" 30, ,0 11,0 8, " 3 8" 31, ,0 11,5 11, " 1 2" 33, ,0 14,0 15, " 1 4" 37, ,0 11,1 6, " 3 8" 38, ,0 12,7 9, " 1 2" 37, ,0 14,0 15, " 3 4" 40, ,5 16,5 19, " 3 8" 42, ,1 12,7 9, " 1 2" 46, ,1 15,9 12, " 3 4" 43, ,0 16,5 19, " 1" 45, ,0 19,0 23,0 SP onnector Reducer Mae SPP x emae SPP Product SPP SPP number mae femae / max " M5x0,8 10,5 14 6, " M5x0,8 13,3 17 7, " 1 8" 13,0 17 8, " 1 8" 14,0 19 9, " 1 4" 14,0 19 9, " 1 8" 15, , " 1 4" 15, , " 3 8" 15, , " 1 4" 23, , " 3 8" 17, , " 1 2" 17, ,0 Suppied with seaing washers xpander Mae SPP x emae SPP 1 Product SPP SPP 1 S number mae femae / min M5x0,8 1 8" 14,5 14 4,0 2,0 7, " 1 4" 19,5 17 6,0 5,5 9, " 3 8" 21,0 22 6,0 5,5 10, " 3 8" 22,5 22 8,0 8,0 10, " 1 2" 26,0 26 8,0 8,0 13, " 3 4" 32,8 32 7,3 6,5 16, " 1 2" 27,0 26 9, , " 3 4" 34,2 32 8,7 9,5 16, " 3 4" 37, ,75 13,6 16,3 Suppied with seaing washers 08/97 N/L

4 Nicke Pated SP & Hose ittings daptor- emae NPT to Mae SPT auge daptor emae SPP to Mae NPT H Product SPT H number NPT / " 1 8" 27,5 4,75 9,50 2,0 10,7 15, " 1 4" 36,0 7,60 11,10 2,0 13,7 19, " 3 8" 38,0 9,60 12,70 2,0 16,7 22, " 1 2" 47,0 12,70 15,90 2,0 21,7 27, " 3 4" 50,0 17,45 19,05 2,0 26,7 36,0 H Product NPT H number SPP / " 1 4" 33,5 7,60 14,3 2,0 17,7 19,O " 3 8" 33,5 9,60 14,3 2,0 16,7 24, " 1 2" 44,0 12,70 19,0 2,0 21,7 27,0 Hexagon Nippe - Mae NPT to Mae SPT H Product SPT H number NPT " 1 8" 27,0 4,75 9,5 9,50 10,7 2,0 11, " 1 4" 3,50 7,60 14,3 11,10 13,7 2,0 14, " 3 8" 37,0 9,60 14,3 12,70 16,7 2,0 17, " 1 2" 46,5 12,70 19,0 15,90 21,7 2,0 22, " 3 4" 47,5 17,45 19,0 19,05 26,7 2,0 27,0 daptor ittings - ow connection between components and system using SP or NPT s SP onnector Reducer Mae SPT x emae SPP xpander Mae SPT x emae SPP 1 Product SPT SPP 1 S number mae femae / min. min " 1 8" 20,0 14 7,5 5,5 7, " 1 8" 16, ,0 5,5 7, " 1 4" 26, ,0 8,0 9, " 1 8" 16, ,5 5,5 7, " 1 4" 16, ,5 8,0 9, " 3 8" 27, ,5 11,0 10, " 1 8" 19, ,0 5,5 7, " 1 4" 19, ,0 8,0 9, " 3 8" 19, ,0 11,0 10, " 1 2" 33, ,0 15,0 13, " 1 4" 29, ,05 11,5 11, " 3 8" 23, ,5 11,0 10, " 1 2" 23, ,5 15,0 13, " 3 8" 34, ,1 15,0 11, " 1 2" 26, ,0 15,0 13, " 3 4" 26, ,0 19,0 16,5 1 Product SPT SPP 1 S number mae femae / min. min " 1 4" 22,0 17 7,5 5 9, " 3 8" 22,5 22 7,5 5 10, " 1 2" 31,0 27 8,6 5 15, " 3 8" 27, ,0 8 10, " 1 2" 30, ,0 8 13, " 3 4" 37, ,1 7 16, " 1 2" 30, , , " 3 4" 38, , , " 3 4" 35, , , " 1" 47, , ,0 bow 2 x emae SPP bow Mae SPT x emae SPP Product SPP S number femae / min " 12 7,0 21 5, " 13 9,5 25, " 16 11, " 20 15, " 27 14,5 36, Product SPT SPP 1 1 S number mae femae / min " 1 8" , ,5 5, " 1 4" ,5 25, " 3 8" 16 11,5 11, " 1 2" , , " 3 4" 27 14,5 14,5 36, N/L /97

5 Nicke Pated SP & Hose ittings bow 2 x Mae SPT Tee 3 x emae SPP Product SPT S number mae / " 12 7,5 18, " " " ,5 15 Product SPP S number femae / min " ,4 19, " ,5 24, " , " , " ,5 36,5 19 Tee 3 x Mae SPT Tee 2 x emae SPP x Mae SPT Leg Product SPT S number mae / " Product SPP SPT 1 1 S number femae mae / min " 1 8" ,5 17,5 19, " 1 4" , " 3 8" , , " 1 2" " 3 4" ,5 16, ,5 19 ross 4 x emae SPP Product SPP S number femae " 39 8,5 19, " " " Pug Mae SPP Product SPP number mae / Ø ,0 4,5 M ,0 6,5 1 8" 14 13, , " 17 17, ,5 9,5 3 8" 19 20, , " 24 26, " 30 32, " 40 38,9 Suppied with seaing washer Pug Mae SPT Product SPT number mae / " 14,5 10 9, " 16, , " , " 22, , " , " ,1 08/97 N/L

6 Nicke Pated SP & Hose ittings Hose daptor Metric I/ Hose ore x Mae SPT Hose daptor Imperia I/ Hose ore x Mae SPT L Ø Product SPT L S number hose mae / min. bore " 32,0 12 7,5 19,5 3, " 32,0 12 7,5 19,5 3, " 35, ,0 19,5 3, " 42, ,3 22,5 5, " 32,0 12 7,5 19,5 5, " 35, ,0 19,5 6, " 36, ,5 19,5 6, " 35, ,0 19,5 7, " 36, ,5 19,5 7, " 36,0 13 8,3 22,5 5, " 41, ,3 22,5 7, " 42, ,25 22,5 7, " 45, ,8 22,5 7, " 36,0 13 8,3 22,5 8, " 35, ,0 19,5 7, " 36, ,5 19,5 7, " 36, ,5 19,5 9, " 48, ,3 29,5 7, " 49, ,25 29,5 11, " 52, ,8 29,5 11, " 55, ,5 29,5 11, " 36, ,5 19, " 39, ,0 19,5 12, " 43, ,5 19,5 14, " 58, ,25 38,0 11, " 61, ,8 38,0 14, " 63, ,5 38,0 17, " 63, ,5 38,0 18, " 67, ,4 38,0 22, " 72, ,4 43,0 24,0 L Ø Product SPT L S number hose mae / min. bore " 1 8" ,3 22,5 4, " 1 4" ,3 22,5 4, " 1 8" ,3 22,5 5, " 1 4" ,3 22,5 5, " 3 8" 42, ,25 22,5 5, " 1 2" 45, ,8 22,5 5, " 1 8" ,3 22, " 1 4" ,3 22, " 1 8" ,3 22, " 1 4" ,3 22, " 3 8" 42, ,25 22,5 8, " 1 2" 45, ,8 22,5 8, " 1 4" 48, ,3 29, " 3 8" 49, ,25 29,5 10, " 1 2" 52, ,8 29,5 10, " 3 4" 55, ,5 29,5 10, " 1 2" 61, ,8 38,0 14, " 3 4" 63, ,5 38,0 14, " 1 2" 61, ,8 38,0 14, " 3 4" 63, ,5 38,0 17, " 1" 67, ,4 38,0 17, " 1" 67, ,4 38,0 22, " 1 1 4" 80, ,7 43,0 29, " 1 1 2" 80, ,7 43,0 36,0 Hose daptor Metric I/ Hose ore x Mae SPP Swive Hose daptor Imperia I/ x emae SPP L Ø Product SPP L S number hose mae / min. bore ,5 M3 14,0 5 3,5 7,5 1, M5x0,8* 15,6 8 3,5 7,5 2, " 21,0 14 7,4 7,5 2, " 36,5 14 7,4 22,5 3, " 40, ,0 22,5 3, " 36,5 14 7,4 22,5 4, " 36,5 14 7,4 22,5 5, " 40, ,0 22,5 5, " 43, ,4 22,5 5, " 36,5 14 7,4 22,5 7, " 40, ,0 22,5 7, " 43, ,4 22,5 7, " 47, ,0 22,5 7, " 47, ,0 29,5 11, " 49, ,4 29,5 11, " 54, ,0 29,5 11, " 59, ,3 29,5 11, " 67, ,3 38,0 17,5 L Ø Product SPP L S number hose femae / min. bore " 1 8" 32,3 13 4,6 22,5 4, " 1 4" 34,8 17 6,0 22,5 5, " 3 8" 35,8 22 6,0 22,5 5, " 1 4" 34,8 17 6,0 22,5 6, " 3 8" 35,8 22 6,0 22,5 8, " 1 2" 37,9 27 7,4 22,5 8, " 1 2" 44,9 27 7,4 29,5 10, " 3 4" 49, ,9 29,5 10, " 3 4" 58, ,9 38,0 16,5 Suppied with seaing washer N/L /97

7 Nicke Pated SP & Hose ittings Hose onnector Imperia bow anjo ssemby Non Reguating ot Ø Ø Product S number hose bore " ,5 4, " ,5 5, " ,5 7, " ,5 8, " ,5 10, " ,0 14, " ,0 17, " ,0 22,4 1 S Ø Product 1 number / SP SP /8" 1/8" , /4" 1/4" , /8" 3/8" ,5 9, /2" 1/2" ,6 emae parae SP to mae parae SP oth ends identica. bow anjo ssemby Reguating Out bow anjo ody 1 S Ø Product 1 S number / SP SP 16K /8" 1 /8" ,0 6,0 16K /4" 1 /4" ,0 7,6 16K /8" 3 /8" ,5 9,6 16K /2" 1 /2" ,0 9,6 rrow on bot hexagon indicates free fow direction. Pressure range 1-10 bar. S Ø Product number for Ø SP SP bot /8" 1/8" 14,0 28,0 13,0 21 6, /4" 1/4" 16,0 37,0 16,0 28 7, /8" 3/8" 20,5 42,0 20,5 31 9, /2" 1/2" ,7 47 9,6 emae parae SP anjo ot Non Reguating Singe Stacking anjo ot Non Reguating oube Stacking 1 Product 1 number / SP /8" , /4" , /8" , /2" ,5 Mae parae SP. banjo bots suppied compete with seaing washers. 1 Product 1 number / SP /8" , /4" , /8" 62,5 22 9, /2" ,5 Mae parae SP anjo ot Reguating Singe stacking SP parae i-irectiona ow 1 Reguating Out Product 1 number / 20K " 34, K " 36, K " 51, K " 57,0 27 Product 1 number / 20M " 34, M " 36, M " 51, M " 57,0 27 banjo bots suppied compete with seaing washers. rrow on bot hexagon indicates free fow direction. Pressure range 1-10 bar. Reguating In Product 1 number / 20L " 34, L " 36, L " 51, L " 57, /97 N/L

8 Nicke Pated SP & Hose ittings at Union ssemby Nom / / part number size O/ Length Length Hex SPT Hex Length Thro /8" 33,3 15,0 10,0 5 6,0 1/8" /4" 42,0 18,5 13,0 8 9,5 1/4" /8" 43,0 19,0 13, ,0 3/8" /2" 52,0 23,0 17, ,0 1/2" /4" 56,5 25,0 19, ,0 3/4" " 68,0 29,0 23, ,0 1" 46 Singe Sided Manifod ØL U 2 1 Product No. 1 2 L U number of outets SP /8" ,0 25,0 15 5, /4" ,0 31,0 20 5, /8" ,4 34,9 23 6, /8" ,0 25,0 15 5, /4" ,0 31,0 20 5, /8" ,4 34,9 23 6,5 27 Product is unpated brass Locknut - Metric Locknut - Inch Product number / SP " 4, " 6, " 6, " 6, " 7, " 7, " 8, " 8, " 9,5 55 Product number / SP " 0,19 0, " 0,25 0, " 0,25 0, " 0,25 1, " 0,28 1, " 0,31 1, " 0,34 1,67 Product is unpated brass Product is unpated brass Taper pug rass - unpated Taper pug Stee - zinc pated Product number / SPT " " " " " " Product number / SPT Z 1 8" Z 1 4" Z 3 8" Z 1 2" Z 3 4" Z 1" N/L /97

9 Nicke Pated SP & Hose ittings Warning These products are intended for use in industria compressed air systems ony. o not use these products where pressures and temperatures can exceed those isted under Technica ata. efore using these products with fuids other than those specified, for non-industria appications, ife-support systems, or other appications not within pubished specifications, consut Norgren. Through misuse, age, or mafunction, components used in fuid power systems can fai in various modes. The system designer is warned to consider the faiure modes of a component parts used in fuid power systems and to provide adequate safeguards to prevent persona injury or damage to equipment in the event of such faiure. System designers must provide a warning to end users in the system instructiona manua if protection against a faiure mode cannot be adequatey provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where appicabe. 08/97 N/L