Thin-Film Directional Couplers
|
|
- Deirdre Cameron
- 6 years ago
- Views:
Transcription
1 CP6 High Directivity LGA Termination GENERAL DESCRIPTION ITF (Integrated Thin-Film) TECHNOLOGY The ITF LGA Coupler is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and rugged construction for reliable automatic assembly. The ITF Coupler is offered in a variety of frequency bands compatible with various types of high frequency wireless systems. DIMENSIONS: (Bottom View) A B millimeters (inches) S APPLICATIONS Mobile Communications Satellite TV Receivers GPS Vehicle Location Systems Wireless LAN s HOW TO ORDER CP 6 FEATURES Inherent Low Profile Self Alignment during Reflow Excellent Solderability Low Parasitics Better Heat Dissipation Operating/Storage Temp C to +85 C Power Rating W RF Cont X **** T L W T X W 1.6±.1 (.6±.4).84±.1 (.±.4).6±.1 (.24±.4) N A B S L.25±.5 (.1±.2).2±.5 (.8±.2).5±.5 (.2±.2) TR Style Directional Coupler Size 6 Type Frequency (MHz) Sub Type Termination Code L = LGA Sn9, Pb1 **N = LGA Sn1 Packaging Code TR = Tape and Reel **RoHS compliant QUALITY INSPECTION Finished parts are 1% tested for electrical parameters and visual characteristics. Each production lot is evaluated on a sample basis for: Static Humidity: 85 C, 85% RH, 16 hours Endurance: 125 C, I R, 4 hours TERMINATION Sn9Pb1 or Lead-Free Sn1 Nickel/Solder coating compatible with automatic soldering technologies: reflow, wave soldering, vapor phase and manual. ORIENTATION IN TAPE TERMINALS (Top View) OUT IN 5 OHM COUPLING Recommended Pad Layout Dimensions Not RoHS Compliant LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. mm (inches) OUT IN 5 OHM CP OUT IN 5 OHM CP 1.75 (.69).5 (.2).4 (.16) 1.1 (.4) *The recommended distance to the PCB Ground Plane is.254mm (.1") 5
2 CP6 High Directivity LGA Termination CP6 - TYPE SELECTION CHART vs. Frequency -5-1 CP6AxxxxCN CP6AxxxxHN CP6AxxxxKN CP6AxxxxAN CP6AxxxxDN CP6AxxxxBN CP6AxxxxMN CP6AxxxxEN CP6AxxxxLN -15 CP6AxxxxFN db -2 CP6AxxxxGN Intermediate coupling factors are readily available. Please contact factory. 54
3 CP6 High Directivity LGA Type Coupler CP6AxxxxAN CP6A86AN CP6A881AN CP6A92AN CP6A947AN CP6A897AN CP6A942AN PDC CP6A1441AN CP6A1747AN CP6A1842AN CP6A188AN CP6A196AN PHP CP6A197AN DECT CP6A189AN Wireless LAN CP6A2442AN CP6A5AN CP6A5AN CP6A55AN CP6A6AN CP6AxxxxANTR Coupler CP6AxxxxBN CP6A86BN CP6A881BN CP6A92BN CP6A947BN CP6A897BN CP6A942BN PDC CP6A1441BN CP6A1747BN CP6A1842BN CP6A188BN CP6A196BN PHP CP6A197BN DECT CP6A189BN Wireless LAN CP6A2442BN CP6A5BN CP6A5BN CP6A55BN CP6A6BN CP6AxxxxBNTR Coupler CP6AxxxxCN CP6A86CN CP6A881CN CP6A92CN CP6A947CN CP6A897CN CP6A942CN PDC CP6A1441CN CP6A1747CN CP6A1842CN CP6A188CN CP6A196CN PHP CP6A197CN DECT CP6A189CN Wireless LAN CP6A2442CN CP6A5CN CP6A5CN CP6A55CN CP6A6CN CP6AxxxxCNTR
4 CP6 High Directivity LGA Type Coupler CP6AxxxxDN CP6A86DN CP6A881DN CP6A92DN CP6A947DN CP6A897DN CP6A942DN PDC CP6A1441DN CP6A1747DN CP6A1842DN CP6A188DN CP6A196DN PHP CP6A197DN DECT CP6A189DN Wireless LAN CP6A2442DN CP6A5DN CP6A5DN CP6A55DN CP6A6DN CP6AxxxxDNTR Coupler CP6AxxxxEN CP6A86EN CP6A881EN CP6A92EN CP6A947EN CP6A897EN CP6A942EN PDC CP6A1441EN CP6A1747EN CP6A1842EN CP6A188EN CP6A196EN PHP CP6A197EN DECT CP6A189EN Wireless LAN CP6A2442EN CP6A5EN CP6A5EN CP6A55EN CP6A6EN CP6AxxxxENTR Coupler CP6AxxxxFN CP6A86FN CP6A881FN CP6A92FN CP6A947FN CP6A897FN CP6A942FN PDC CP6A1441FN CP6A1747FN CP6A1842FN CP6A188FN CP6A196FN PHP CP6A197FN DECT CP6A189FN Wireless LAN CP6A2442FN CP6A5FN CP6A5FN CP6A55FN CP6A6FN CP6AxxxxFNTR
5 CP6 High Directivity LGA Type Coupler CP6AxxxxGN CP6A86GN CP6A881GN CP6A92GN CP6A947GN CP6A897GN CP6A942GN PDC CP6A1441GN CP6A1747GN CP6A1842GN CP6A188GN CP6A196GN PHP CP6A197GN DECT CP6A189GN Wireless LAN CP6A2442GN CP6A5GN CP6A5GN CP6A55GN CP6A6GN CP6AxxxxGNTR Coupler CP6AxxxxHN CP6A86HN CP6A881HN CP6A92HN CP6A947HN CP6A897HN CP6A942HN PDC CP6A1441HN CP6A1747HN CP6A1842HN CP6A188HN CP6A196HN PHP CP6A197HN DECT CP6A189HN Wireless LAN CP6A2442HN CP6A5HN CP6A5HN CP6A55HN CP6A6HN CP6AxxxxHNTR Coupler CP6AxxxxMN CP6A86MN CP6A881MN CP6A92MN CP6A947MN CP6A897MN CP6A942MN PDC CP6A1441MN CP6A1747MN CP6A1842MN CP6A188MN CP6A196MN PHP CP6A197MN DECT CP6A189MN Wireless LAN CP6A2442MN CP6A5MN CP6A5MN CP6A55MN CP6A6MN CP6AxxxxMNTR
6 CP6 High Directivity LGA Type Coupler CP6AxxxxLN CP6A86LN CP6A881LN CP6A92LN CP6A947LN CP6A897LN CP6A942LN PDC CP6A1441LN CP6A1747LN CP6A1842LN CP6A188LN CP6A196LN PHP CP6A197LN DECT CP6A189LN Wireless LAN CP6A2442LN CP6A5LN CP6A5LN CP6A55LN CP6A6LN CP6AxxxxLNTR Coupler CP6AxxxxKN CP6A86KN CP6A881KN CP6A92KN CP6A947KN CP6A897KN CP6A942KN PDC CP6A1441KN CP6A1747KN CP6A1842KN CP6A188KN CP6A196KN PHP CP6A197KN DECT CP6A189KN Wireless LAN CP6A2442KN CP6A5KN CP6A5KN CP6A55KN CP6A6KN CP6AxxxxKNTR
7 CP42 / CP6 High Directivity Couplers Test Jigs GENERAL DESCRIPTION These jigs are designed for testing the CP42 and CP6 High Directivity Couplers using a Vector Network Analyzer. They consist of a dielectric substrate, having 5Ω microstrips as conducting lines and a bottom ground plane located at a distance of.254mm (.1") from the microstrips. The substrate used is Neltec s NH98ST254C1BC. The connectors are SMA type (female), Johnson Components Inc. Product : Both a measurement jig and a calibration jig are provided. The calibration jig is designed for a full 2-port calibration, and consists of an open line, short line and through line. LOAD calibration can be done by a 5Ω SMA termination. MEASUREMENT PROCEDURE When measuring a component, it can be either soldered or pressed using a non-metallic stick until all four ports touch the appropriate pads. Set the VNA to the relevant frequency band. Connect the VNA using a 1dB attenuator on the jig terminal connected to port 2. Follow the VNA s instruction manual and use the calibration jig to perform a full 2-Port calibration in the required bandwidths. Place the coupler on the measurement jig as follows: Input (Coupler) Connector 1 (Jig) Termination (Coupler) Connector (Jig) Output (Coupler) Connector 2 (Jig) (Coupler) Connector 4 (Jig) To measure connect: Connector 1 (Jig) Port 1 (VNA) Connector (Jig) 5Ω Connector 2 (Jig) Port 2 (VNA) Connector 4 (Jig) 5Ω To measure and connect: Connector 1 (Jig) Port 1 (VNA) Connector (Jig) 5Ω Connector 2 (Jig) 5Ω Connector 4 (Jig) Port 2 (VNA) To measure connect: Connector 1 (Jig) 5Ω Connector (Jig) 5Ω Connector 2 (Jig) Port 1 (VNA) Connector 4 (Jig) Port 2 (VNA) Measurement Jig Calibration Jig Connector 4 Connector 1 Connector 2 Open Line Short Line to GND. OPEN HS TH Connector Johnson Load & Through Connector Load & Through 59
Thin-Film Directional Couplers
42 High Directivity LGA Termination GENERAL DESCRIPTION ITF (Integrated Thin-Film) TECHNOLOGY The ITF High Directivity LGA Coupler is based on thin-film multilayer technology. The technology provides a
More informationThin-Film Low Pass Filter
LP63 Lead-Free LG Type GENERL DESCRIPTION The LP63 ITF (Integrated Thin Film) Lead-Free LG Low Pass Filter is based on thin-film multilayer technology. The technology provides a miniature part with excellent
More informationHybrid Couplers 3dB, 90º Type PC2025A2100AT00
GENERAL DESCRIPTION The PC2025A2100AT00 is a RoHS compliant low profile wideband 3dB hybrid coupler which can support mobile applications, including PCS and DCS applications. The power coupler series of
More information"High Frequency Ceramic Solutions"
Page 1 of 5 This filter is associated with Intel Reference Desing Platform: IRE220 General Specifications Part Number 5697CR45A0360 Operating Passband Freq. 5490-5850 MHz Top View Insertion loss (5490-5670MHz)
More informationELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3
Pico Xinger 20dB Directional Coupler Description The 1P620 Pico Xinger is a low profile, miniature 20dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications.
More informationGHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3
` Model 1P603S Hybrid Coupler 3 db, 90 Features: 2.3 2.7 GHz. W-LAN and MMDS Low Loss High Isolation 90 o Quadrature Surface Mountable Tape And Reel Available in Lead-Free (as illustrated) or Tin- Lead
More informationELECTRICAL SPECIFICATIONS**
ico Xinger 1dB Directional Coupler Description The 161 ico Xinger is a low profile, miniature 1dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications. The
More informationELECTRICAL SPECIFICATIONS**
REV A Hybrid Couplers 3 db, 90 Description The 1P503AS Pico Xinger is a low profile, high performance 3dB hybrid coupler in an easy to use manufacturing friendly surface mount package. It is designed for
More informationMLVS 0402 Series Engineering Specification
MLVS 0402 Series 1. Scope This specification is applicable to Chip Metal Oxide Varistor in multilayer technology.the customer designed part number drawing take precedence over this specification. For RoHS
More informationModel XDL S Rev A
Delay Line DESCRIPTION The XDL15-3-030S can be used in amplifier linearization applications from 135 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading to obtain longer delay. The Xinger
More informationPAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 X3X 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE 13-08-18 SERIES Micro-SPDT PART NUMBER R516 X3X 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationQPQ MHz Band 41 BAW Filter Product Overview Key Features Functional Block Diagram Applications Pin Configuration Pin No.
1 MHz Product Overview The is an ultrahigh performance Bulk Acoustic Wave (BAW) filter that provides 1 MHz bandwidth for uplink / downlink applications in Band 41. With low passband insertion loss and
More informationCP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
More informationR R : R packaged in reel of 2000 couplers SMT HYBRID COUPLER GHZ Series : Coupler TECHNICAL DATA SHEET 1 / 5
TECHNICAL DATA SHEET 1 / 5 R41.211.502 R41.211.502 : R41.211.500 packaged in reel of 2000 couplers All dimensions are in mm. TECHNICAL DATA SHEET 2 / 5 R41.211.502 ELECTRICAL CHARACTERISTICS Specified
More informationTransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
More informationSLVU WATT ULTRA LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT ULTRA LOW CAPACITANCE TVS ARRAY Description The is a low voltage, low leakage current and ultra low capacitance TVS device designed for EOS and ESD protection of low voltage circuits commonly
More informationFilm Chip Capacitors. PPS DIELECTRIC CB Series GENERAL DESCRIPTION ADVANTAGES APPLICATIONS PERFORMANCE CHARACTERISTICS
APPLICATIONS General purpose function in low voltage applications: Filtering, coupling, decoupling Time-constant Oscillation timing circuit Typical applications would be: Automotive (navigation system...)
More informationGain Equalizers EQY-SERIES. Microwave. The Big Deal
Microwave Gain Equalizers 50Ω DC to 6 GHz EQY-SERIES The Big Deal Excellent Return Loss, 20dB typ. Wide bandwidth, DC - 6 GHz Small Size, 2 mm x 2 mm CASE STYLE: MC1631-1 Product Overview EQY series of
More informationSFC ChipClamp ΤΜ Flip Chip TVS Diode with T-Filter PRELIMINARY Features
Description The SFC2282-50 is a low pass T-filter with integrated TVS diodes. It is designed to provide bidirectional filtering of EMI/RFI signals and electrostatic discharge (ESD) protection in portable
More informationTQQ MHz LTE Band 3 Uplink BAW Filter
Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss
More informationACA-5036-A2-CC-S Specification
1. APPLICATION: WLAN, 802.11b/g, Bluetooth, etc ACA-5036-A2-CC-S Specification 2. Explanation of part number : AC A _ 5036 _ A2 _ CC _ S (1) (2) (3) (4) (5) (6) (7) (1) Product Type:Chip Antenna (2) Center
More informationVertical Launch Connectors
Microwave Farm s Vertical Launch Connectors are specially designed for solderless vertical PCB launch on test & measurement board. These connectors have excellent electrical transition performance up to
More informationPower Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz
MMIC Surface Mount Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz The Big Deal Wideband (5-11 GHz) Good Isolation and Return Loss Highly repeatable performance (GaAs based design) No external termination
More informationSFC05-4 ChipClamp ΤΜ Flip Chip TVS Diode Array PRELIMINARY Features
Description The SFC05-4 is a quad flip chip TVS array. They are state-of-the-art devices that utilize solid-state siliconavalanche technology for superior clamping performance and DC electrical characteristics.
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More informationPSOT03LC - PSOT36LC 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection
More informationVertical Launch Connectors
Microwave Farm s are specially designed for solderless vertical PCB launch on test & measurement board. These connectors have excellent electrical transition performance up to 26.5 GHz, 40 GHz,50 GHz &
More informationTQQ0041T. Band 41 Tx/Rx Filter. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information.
Product Overview The TQQ0041T is a high-performance Bulk Acoustic Wave (BAW) Tx / Rx filter designed to meet the strict LTE rejection requirements for use in B41. TQQ0041T is specifically designed to meet
More informationPLCDA03C-6 thru PLCDA24C-6 LOW CAPACITANCE TVS ARRAY
51-6 -6 LOW APAITANE TVS ARRAY APPLIATIONS Ethernet - 1/1 Base T FireWire SSI Bluetooth & RF IE OMPATIBILITY (EN61-) 61-- (ESD): Air - 15kV, ontact - kv 61-- (EFT): A - 5/5ns 61--5 (Surge): A, /µs - Level
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationLTCC Hybrid Coupler
1 / 11 1. Description 1-1. Part number: 1-. Features - Hybrid Coupler 3dB, 90 - Surface mount type - Suitable for operation frequency 1150 ~ 1650MHz - RoHS compliance - High stability in temperature and
More informationMonolithic Amplifier CMA-252LN+ Ultra Low Noise, High IP to 2.5 GHz. The Big Deal
Ultra Low, High IP3 Monolithic Amplifier 50Ω The Big Deal 1.5 to 2.5 GHz Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high Ultra Low High Gain, High IP3 Class 1B HBM ESD (500V) CASE
More informationMLVG0402 Series Engineering Specification
RoHS Pb MLVG0402 Series Engineering 1. Scope (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating termination
More informationPLCDA03C-6 - PLCDA15C-6
5 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The PLCDAxxC-6 Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and
More informationLCD05C - LCD24C HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION 16 PIN DIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION The LCD Series are high powered multi-line TVS arrays available in a 16 pin DIP package. This series is designed to protect high-speed applications from the
More informationSouthwest Microwave, Inc. Tempe, Arizona, USA +1 (480) mm (V) Series DC to 67.
The Performance Leader in Microwave Connectors 1.85 mm (V) Series DC to 67.0 GHz Connectors Supplement to Catalog Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480) 78-0201 infompd@southwestmicrowave.com
More informationImpedance (Ω) at DC Resistance
Type BMB-A Series Key Features Effective EMI Protection Wide Frequency Characteristics High soldering Heat Resistance Various Package Sizes Available Suited to a Variety of Applications Terminal finish
More informationAOZ8204. Four-line TVS Diode Array. Features. General Description. Applications
AOZ80 Four-line TS Diode Array General Description The AOZ80 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and SD. This state-of-the-art device
More informationRClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
More information2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
More informationAOZ8102. Ultra-Low Capacitance TVS Diode Array. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from SD and lightning. This device incorporates eight surge
More informationMAX2009/MAX2010 Evaluation Kits
19-2972; Rev 0; 9/03 MAX2009/MAX2010 Evaluation Kits General Description The MAX2009/MAX2010 evaluation kits (EV kits) simplify the evaluation of the MAX2009 and MAX2010. These kits are fully assembled
More informationSP5001 Series 4 Channel Common Mode Filter with ESD Protection
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel Common Mode Filter with ESD Protection RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF) providing
More informationfor Bluetooth/Wimax Application
ANTENNA PRODUCTS Sept., 2008 V8 Tommy Chen Page 1 sheet 190-1 A4 for Bluetooth/Wimax Application Quick Reference Data Centre Frequency Bandwidth VSWR Polarization Azimuth Beamwidth Peak Gain Impedance
More informationDATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier.
MMIC Silicon Bipolar Broadband Amplifier NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN621 Rev 0.00
More informationDSL03-24T ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The 24V thyristor array, steering diode combination device meets
More informationRClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
More informationFX5767 FX GHz DPDT Switch Module. Features. Description. Block Diagram. Application. Broadband support GHz. Compatible with 3G/LTE
FX5767 0.7-3.0GHz DPDT Switch Module Description The FX5767 is a DPDT (Double-pole double-throw) switch module, designed for multimode broadband 3G/LTE cellular applications, supporting from 700MHz to
More informationINPAQ Global RF/Component Solutions
TVN 0201 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVN 0201 01 SP0 Size EIA 0201 TVN 0201 01 SP0 Engineering Specification 1. Scope TVN 0201 01 SP0 is a TVS
More informationEnables prolonged battery life. Saves DC power consumption when it is not reguired.
Ultra Low Noise, Low Current, Shutdown Monolithic Amplifier 50Ω 10 to 13 GHz The Big Deal Ultra-low noise figure, 1.3 db Low Current, 13 ma at 3V and 29mA at 5V Excellent ESD protection, Class 1C Small
More informationWirewound Chip Inductors
FEATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) HIGH CURRENT AND LOW DCR *See Part Number System for Details REFLOW SOLDERING APPLICABLE TAPE & REEL PACKAGING FOR AUTOMATIC PICK-PLACE Specifications
More informationRClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
More informationDATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier
MMIC Silicon Bipolar Broadband Amplifier NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PARTS ISL5512, ISL5515 DATASHEET FN6199 Rev. The ISL555, ISL557, ISL558 and ISL559, ISL551, ISL5511 constitute
More informationTypical Performance 1. 2 OIP3 _ measured with two tones at an output of 0 dbm per tone separated by 1 MHz. RFout
Device Features 3 ~ 3.3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-343 package Product Description BeRex s BGS6 is a high SiGe HBT MMIC amplifier,
More informationSP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
More informationLCD and Camera EMI Filter Array with ESD Protection
LCD and Camera EMI Filter Array with ESD Protection Features Six and eight channels of EMI filtering with integrated ESD protection 0.4mm pitch, 15-bump, 2.360mm x 1.053mm footprint Chip Scale Package
More information6 Channel EMI Filter Array with ESD Protection
6 Channel EMI Filter Array with ESD Protection Features Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network Greater than 32dB attenuation
More informationAOZ8204DI. Four-line TVS Diode Array. Features. General Description. Applications
AOZ80DI Four-line TS Diode Array General Description The AOZ80 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and SD. This state-of-the-art
More informationSpecification For LTCC 3dB Hybrid Coupler
Specification For LTCC 3dB Hybrid Coupler Model Name : Customer : Title: Name : APPROVED By Date : Signature : RN2 Technologies co., Ltd. RN2 Technologies co., Ltd. 284-2, Galgot-ri, Jinwe-myeon, Pyeongtaek-si,
More informationTQM4M9073 Through Line
Applications General Purpose Wireless RF bypass paths Microwave Radio Test & Measurement Scientific Instruments 16-pin 3x3mm leadless SMT package Product Features Functional Block Diagram DC 6 GHz 50 ohm
More informationSP5001 Series 4 Channel TVS Common Mode Filter
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel TVS Common Mode Filter RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF providing both ESD protection
More informationML Varistor Series. Surface Mount Varistors
Pb The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
More informationRF Probing With Rohde & Schwarz ZNB VNA. PacketMicro, Inc Wyatt Drive, Suite 9, Santa Clara, CA
RF Probing With Rohde & Schwarz ZNB VNA PacketMicro, Inc. 1900 Wyatt Drive, Suite 9, Santa Clara, CA 95054 www.packetmicro.com Outline Why RF Probing Page 3 4 S-Probe Overview Page 5-8 RF Probing Tips
More informationINPAQ. Specification TEA10402V15A0. Product Name. ESD Guard TM TEA Series (Thin Film Air Gap) Size EIA Global RF/Component Solutions
TEA10402V15A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10402V15A0 Size EIA 0402 TEA10402V15A0 Engineering Specification 1. Scope TEA series is designed to
More informationBaluns and 90 Degree Hybrid Couplers. Directional Couplers. Attenuators, Resistors and Terminations. Combiners/Dividers
Baluns and 90 Degree Hybrid Couplers Directional Couplers Combiners/Dividers Attenuators, Resistors and Terminations RF and Microwave Passive Components for Military, Medical, Industrial and Wireless Applications
More informationTVU1240R1A Engineering Specification
Part : TVU1240R1A Version : A6 Page : 1 / 10 SCOPE TVU1240R1A Engineering Specification This specification is applied to protect sensitive electronic circuits from the threat of electrostatic discharge
More informationX2Y - series Surface-mount ceramic EMI filter
DISCRETE CERAMICS X2Y series Surface mount component June 2002 Rev 6 X2Y - series 2002 July 26 v1.07 www.yageo.com X2Y Series Table of Contents 1. Introduction, Benefits, Applications 2. Available Capacitances
More informationTGL2206-SM GHz 100 Watt VPIN Limiter
Applications Receive Chain Protection Commercial and Military Radar 5 mm x 5 mm QFN Package Product Features Functional Block Diagram Frequency Range: 2.0 to 5.5 GHz Insertion Loss: < 1.0 db Peak Power
More informationRClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
More informationINPAQ Global RF/Component Solutions
TEA10201V05A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10201V05A0 Size EIA 0201 TEA10201V05A0 Engineering Specification 1. Scope This specification is applied
More informationModel XEC24E3-03G. Hybrid Coupler 3 db, 90
Hybrid Coupler 3 db, 90 Description The XEC24E3-03G is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for IMS band,
More informationSP2555NUTG 2.5V 45A Diode Array
SP2555NUTG 2.5V 45A Diode Array RoHS Pb GREEN Description The SP2555NUTG is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge), CDE (cable discharge
More informationINPAQ Global RF/Component Solutions
TEA10402V15A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10402V15A0 Size EIA 0402 TEA10402V15A0 Engineering Specification 1. Scope This specification is applied
More informationControl Devices Surface Mount Input-Limiting Diode Element
GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
More informationINPAQ. Specification TVN AB0. Product Name Transient Voltage Suppressor Series TVS Series Part No TVN AB0 Size EIA 0201
TVN 0201 01 AB0 Specification Product Name Transient Voltage Suppressor Series TVS Series Part No TVN 020101 AB0 Size EIA 0201 TVN 0201 01 AB0 Engineering Specification 1. Scope TVN 0201 01 AB0 is a TVS
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
More informationINPAQ Global RF/Component Solutions
TVU1240R1A Specification Product Name Series Part No ESD Guard TM Array TVU Series TVU1240R1A Size EIA 1004 TVU1240R1A Product Engineering Specification 1. Scope This specification is applied to protect
More informationHeadset/Speaker EMI Filter with ESD Protection CM1416/D. Features. Product Description. Applications. ±30kV ESD protection on each channel per
Headset/Speaker EMI Filter with ESD Protection CM1416 Features Functionally and pin compatible with the CSPEMI201A and CM1411 OptiGuard coated for improved reliability at assembly Two channels of EMI filtering
More informationTVU1240R1A Product Engineering Specification
TVU1240R1A Product Engineering Specification 1. Scope This specification is applied to protect sensitive electronic circuits from the threat of electrostatic discharge (ESD). The function meets with the
More informationAQ1003 Series - 30pF 30kV Unidirectional Discrete TVS
General Purpose ESD Protection - SP003 AQ003 Series AQ003 Series - 30pF 30kV Unidirectional Discrete TVS RoHS Pb GREEN Description This diode is fabricated in a proprietary silicon avalanche technology
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION DESCRIPTION DRAWN Y DESIGNED Y CHECKED Y APPROVED Y TVL 0201 01 SP0 Sandy Aaron Aaron YuChiaChang TVL 0201 01 SP0 Engineering 1. Scope TVL 0201 01 SP0 is a TVS diode designed to protect
More informationTVL AB0 Product Engineering Specification
1. Scope TVL 0201 01 A0 Product TVL 0201 01 A0 is a TVS diode designed to protect one power/control line or one low speed signal line from overvoltage hazard of Electrostatic Discharge (ESD). These interfaces
More informationPLC WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
00 WATT ULTRA LOW CAPACITAE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides two lines of protection. This device protects high-frequency applications such as voice and data
More informationSCT500D Twin SMD Ceramic PTC Thermistor
Desciption The component consists of two high-performance ceramic PTCs mounted in a lead-frame for (SMD) direct soldering onto a printed-circuit board (PCB) or substrate. The ceramic PTCs are soldered
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationModel X4C20F1-30S Rev D
Directional Coupler 30dB Description The X4C20F1-30S is a low profile, high performance 30dB directional coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for DCS,
More information"High Frequency Ceramic Solutions"
Designed for: BAN, Bluetooth, 802.11, WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 1 of 9 General Specifications Part Number Operating Frequency (MHz) Impedance Operating Temperature
More information(LRC) Metal Strip Chip Current Sense Resistor. Token Electronics Industry Co., Ltd. Version: January 12, Web:
Version: January 12, 2017 (LRC) Metal Strip Chip Current Sense Resistor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationSkill Development Centre by AN ISO CERTIFIED COMPANY
Skill Development Centre by AN ISO CERTIFIED COMPANY Industrial Automation Training Embedded/ VLSI system design Electrical control panel Design Product Development Fiber optics Technician Electrician
More informationMHz SAW Filter
Applications For ISM applications Bluetooth Product Features Functional Block Diagram Top view Usable bandwidth 83.5 MHz High Attenuation Singleended operation Ceramic Surface Mount Package (SMP) No Impedance
More informationAOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device
More informationAQ1026 Series 15pF 30kV Bidirectional Discrete TVS
General Purpose ESD Protection - AQ126 SP126 Series AQ126 Series 15pF 3kV Bidirectional Discrete TVS RoHS Pb GREEN Description Avalanche breakdown diodes fabricated in a proprietary silicon avalanche technology
More informationAOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
More informationMulti-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ORDERING CODE... 1 External Dimensions... 2 Beads For Signal Lines(BF series)... 3 Beads For Power Lines (BP series)... 8 Beads For High Speed Signal Lines (BH series)...
More information2 Channel Headset EMI Filter with ESD Protection
2 Channel Headset EMI Filter with ESD Protection Features Two channels of EMI filtering, one for a microphone and one for an earpiece speaker Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C)
More informationSP pF 30kV Bidirectional Discrete TVS
SP1326 15pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1326 back-to-back diodes are fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationTypical Performance 1. WCDMA 4FA_ACLR dbm LTE20M ACLR dbm
Device Features OIP3 = 48.5dBm @ 700 MHz Gain = 22.0 db @ 700 MHz Output P1 db = 33dBm @ 700 MHz 50 Ω Cascadable Highly Reliable InGaP/GaAs HBT Technology Lead-free/RoHS-compliant 24L QFN 4X4 SMT package
More informationSFI Electronics Technology. Super High Network (SHN) Series. Approval Sheet. Customer Information. Part No. : Model No. : Company Purchase R&D
Approval Sheet Customer Information Customer : Part Name : Part No. : Model No. : Company Purchase R&D Vendor Information Name: Part Name Part No. INC. Chip Surge Protection Device (CSPD) Series Lot No.
More information