Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480) mm (V) Series DC to 67.

Size: px

Start display at page:

Download "Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480) mm (V) Series DC to 67."

Emmeline Gibson
6 years ago
Views:

1 The Performance Leader in Microwave Connectors 1.85 mm (V) Series DC to 67.0 GHz Connectors Supplement to Catalog Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480)

2 1.85 mm (V) Series DC to 67.0 GHz Specifications Electrical: _< - Temperature: º º Materials / Construction: Interface Standards Note 1 Notes: 1. Meets VSWR when mated with.0196 /.0206 (0.498 mm / 0.52 mm) Diameter Pin. 2. Interface per IEC 169 Grade 1 1 Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480)

3 1.85 mm (V) Series DC to 67.0 GHz Data 1.85 mm 9 mil Connector Data Data shown represents two connectors tested back-to-back. To extract VSWR data for a single connector, take the square root of the VSWR data point and divide the insertion loss data point by two SF Back-to-Back Test Data Diameter Pin S11 (VSWR) VSWR = 1.26 = 1.12:1 max. for each connector S21 (db) Diameter Pin VSWR = 1.26 = 1.12:1 maximum for each connector, as shown. Contact Southwest Microwave for performance specifications for 1.85mm and all other connectors Frequency (GHz) Interface Compatibility Interface Compatibility with 2.40 mm Connectors (V) 1.85 mm Plug 2.40 mm Jack 1.85 mm Plug/Male Connector 2.40 mm Jack/Female Connector Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480)

4 1.85 mm (V) Series DC to 67.0 GHz Jack (Female) Connectors 4 HOLE SQUARE TYP SQ 4 HOLE.75 SQUARE SF SF SF SF SF SF SF SF SF SF X TYP SQ 4X HOLE.625 x HOLE.550 x HOLE x THREAD-IN JACK (FEMALE) STANDARD M6x.75 REAR THD SF SF THREAD-IN JACK (FEMALE) OPTIONAL 1/4-6 REAR THD -REAR THREAD SF SF Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480)

5 1.85 mm (V) Series DC to 67.0 GHz Plug (Male) Connectors FLANGE PLUG (MALE) 4 HOLE SQUARE TYP SQ FLANGE PLUG (MALE) 4 HOLE.75 SQUARE SF SF SF SF SF SF SF SF X.12 [7.9] HEX TYP SQ 4X [7.9] HEX FLANGE PLUG (MALE) 2 HOLE.625 x [7.9] HEX FLANGE PLUG (MALE) 2 HOLE.550 x [7.9] HEX THREAD-IN PLUG (MALE) 0.1 STANDARD M6x.75 REAR THD REAR THREAD Contact Factory For Availability.12 [7.9] HEX THREAD-IN PLUG (MALE) OPTIONAL 1/4-6 REAR THD -REAR THREAD Contact Factory For Availability.12 [7.9] HEX Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480)

1.85 mm (V) Series Adapters Specifications: 1.85 mm to 1.85 mm Adapter (Model # 182-00SF) Test Data Low VSWR DC to 18.0 GHz...1.10:1 max 18.0 to 40.0 GHz...1.15:1 max 40.0 to 50.0 GHz...1.18:1 max 50.

85 mm (f) to (m) 180-00SF 1.85 mm (m) to (m) 181-00SF 1.85 mm (f) to (f) 182-00SF 1.85 mm (V) Series Direct Solder Cable Connectors Cable Center Conductor Dia..011 Cable.047 Cable Conn. No.

101 [2.56] 1.85 mm Size-16 SSBP Socket Size-16 SSBP Pin 1.85 mm.07 [ 7.790 ] IW 1251 Cable IW 1251 Cable 1.

0 2.5 Detailed information on Direct Solder and on other Cable Connectors, including 0.

6 1.85 mm (V) Series Adapters Specifications: 1.85 mm to 1.85 mm Adapter (Model # SF) Test Data Low VSWR DC to 18.0 GHz :1 max 18.0 to 40.0 GHz :1 max 40.0 to 50.0 GHz :1 max 50.0 to 67.0 GHz :1 max S21 (db) Low Insertion Loss Leakage: <-100dB Temperature Rating: -55ºC to + 165ºC S11 (VSWR) Frequency (GHz) mm (f) to (m) SF 1.85 mm (m) to (m) SF 1.85 mm (f) to (f) SF 1.85 mm (V) Series Direct Solder Cable Connectors Cable Center Conductor Dia..011 Cable.047 Cable Conn. No G 1.85 mm connectors and IW1251 cable mated (Baseline Cable Assembly) 6 in LL G G 1.85 mm connectors and IW1251 cable mated with Size-16 SSBP 6 in..50 [ ].101 [2.56] 1.85 mm Size-16 SSBP Socket Size-16 SSBP Pin 1.85 mm.07 [ ] IW 1251 Cable IW 1251 Cable 1.85 mm Identification Groove MIL-DTL-8999 Plug MIL-DTL-8999 Receptacle Assembly with two G and 6 IW-1251 cables S11 (VSWR) Baseline Cable Assembly Cable Assembly with SSBP Detailed information on Direct Solder and on other Cable Connectors, including 0.9mm/SSBT and SSBP for use in multicontact D-Subminiature and MIL-DTL-8999 connectors, is shown in other catalogs and Southwest Microwave website. Users are cautioned that performance is dependent upon the specific cable selected and third-party cable preparation, which is beyond the control of Southwest Microwave Frequency (GHz) S21 (IL db) 5 Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480)

81 A Test Data, Microstrip Ground Plane Center Pin.29 8.4 1.85 JACK (FEMALE).167 4.24.250 6.

7 1.85 mm (V) Series End Launch Connectors Pin Diameter Dielectric Dia. Low Profile Dim A Board Pin Dim B Internal Dim C Female Male A A A A-6 Circuit Board SHCS X 5/16"L. (.062 [1.57] HEX SOCKET) LOCK WASHER A A B A Test Data, Microstrip Ground Plane Center Pin JACK (FEMALE) Showing test results to 67 GHz for two A-5 End Launch Connectors on a RO400 microstrip board with top ground launch. This shows both VSWR and Insertion Loss for the test board and the two connectors. This is not an optimized test board and is used to illustrate typical assembly. Contact Southwest Microwave for suggested board-launch geometries based upon frequency and board material, for Grounded Coplanar/ GCPWG and Microstrip applications. VNA DEVICE UNDER TEST VNA S11 (VSWR) End Launch Connectors on a Microstrip Board ( A-5) Frequency (GHz) is the maximum for two A-5 End Launch Connectors on a SMI microstrip test board using.008 Rogers RO400 microstrip board S21 (db) 1.0 IN. Note: End Launch Connectors with numbers ending in -6 are Low Silhouette as shown. Similar End Launch connectors ending in -5 are Regular/Higher Silhouette versions. Launch geometry and connector/electrical data and performance are the same. Refer to the End Launch Connectors data in full-line catalog or Southwest Microwave website for dimensions. Contact Southwest Microwave for other End Launch connectors ranging from SMA to miniature 0.9mm versions and for select Non-Magnetic models. Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480)

8 Rev. 2.0 The Performance Leader in Microwave Connectors 1.85 mm (V) Series DC to 67.0 GHz Connectors Supplement to Catalog Southwest Microwave, Inc. is the leader in hi-performance interconnect products for millimeter wave and microwave applications. Providing the best value through performance as well as: Low VSWR Low Insertion Loss Low RF Leakage High Temperature Higher Power Handling Excellent Repeatability Rugged & Durable Southwest Microwave, Inc S. McKemy St., Tempe, AZ USA Phone: +1 (480)

Index. End Launch Connector Series. End Launch Connectors (67 GHz)... Page. Installation Procedure End Launch Connector Dimensions...

Index. End Launch Connector Series. End Launch Connectors (67 GHz)... Page. Installation Procedure End Launch Connector Dimensions... Connector Series Index (67 GHz).... Page Specifications... 51 Introduction... 52 Procedure... 53 Connector Dimensions... 54 Connector Numbers... 55 Typical Test Data... 56 50 Specifications Applications