Desktop Client Guide

Transcription

1 Desktp Client Guide December 22, Versin Fr the mst recent versin f this dcument, visit ur dcumentatin website.

2 Table f Cntents 1 Overview RDC menu bar Wrkspace flder ptins Starting the RDC Lgging n t the RDC 8 2 Using the RDC installer Sftware requirements Installing the RDC Changing, repairing, r remving RDC installatin 11 3 Imprting thrugh the RDC Imprting multiple lad files simultaneusly Handling errrs Saving imprt settings Saving a field map Viewing audit infrmatin fr an imprt Lad file specificatins Metadata, extracted text, and native files Image and extracted text files Prcessed data Imprting dcument metadata, files, and extracted text Imprting dcuments Imprting Yes/N fields n dcuments Imprting an image file Imprting a prductin file Imprt errrs fr Desktp Client 39 Relativity Desktp Client Guide - 2

3 4 Exprting with the RDC Technical cnsideratins fr.kwx files Exprting a prductin set Fields n the Destinatin Files tab Exprting a saved search Fields n the Destinatin Files tab Exprting a flder Fields n the Destinatin Files tab Exprting a flder and its subflders Fields n the Destinatin Files tab 71 5 Cnfiguring the RDC Batch handling Validatin and auditing Imprt and exprt 77 Relativity Desktp Client Guide - 3

4 1 Overview The Relativity Desktp Client (RDC) prvides the functinality fr imprting dcument lad, image, and prductin files, as well as fr exprting prductin sets, saved searches, and flders. Yu can als use this utility t imprt and exprt custm applicatins and bject data. Using the RDC As a litigatin supprt specialist, yu need t exprt a prductin f files fr the ppsing cunsel in the Salt vs. Pepper case. Yu created a prductin set named "Salt vs. Pepper - Prductin" and ran yur prductin, and nw yu need t exprt the prductin using the RDC. S, yu pen the RelativityDesktp Client and lg in t yur Relativity envirnment. Yu select and pen the Salt vs. Pepper case and then click Prductin Set... n the Exprt menu t pen the prductin exprt ptins. Since this prductin set cnsists nly f messages, yu include yur Bates numbering and metadata fields in the exprted metadata. Relativity Desktp Client Guide - 4

5 The case prductin frmat requirements yu need t cmply with include PDF images with an Opticn data file frmat and a.csv data file frmat with Unicde (UTF-8) encding. On the Destinatin Files tab, yu select the required frmat ptins and als select t cpy the files frm the repsitry t cpy the exprted s t yur exprt netwrk directry. Relativity Desktp Client Guide - 5

6 After selecting yur ptins, yu're ready t click Run n the File menu t cmplete the prductin exprt t be able t send the Salt vs. Pepper s as PDF images with the required data files t the ppsing cunsel. 1.1 RDC menu bar The RDC menu bar appears abve the wrkspace flder structure. It includes the fllwing menu ptins: File: Open - switches between different wrkspaces Exit - clses the RDC Refresh - updates the flder brwser Tls - Imprt: Image File - imprts images frm a page-level lad file Dcument Lad File - imprts native files, dcument metadata, and extracted text frm a dcumentlevel lad file Prductin Lad File - imprts prductins frm a page-level lad file Tls - Exprt: Prductin Set - exprts prductin sets Saved Search - exprts frm saved searches Relativity Desktp Client Guide - 6

7 Flder - exprts frm a specific flders Flder and Subflders - exprts frm a specific flder and its subflders Optins: Help: Settings - changes the default value fr Frce Flder Preview and enter a WebService URL Check Cnnectivity - assists with trubleshting netwrk and system cnfiguratin errrs that ccurred while imprting and exprting Abut - displays the versin f the RDC 1.2 Wrkspace flder ptins The RDC prvides right-click ptins n flders, which yu can use t build the wrkspace flder structure, r t imprt and/r exprt directly t and frm a flder. When yu right-click n a wrkspace r flder, the fllwing menu ptins are displayed: New Flder - create subflders. In the Add New Flder pp-up, enter a flder name and click OK. The maximum length fr the flder name is 255 characters. Since the flder name is a system field, nce yu create it, yu can't edit it. The new flder is added t the wrkspace thrugh the RDC. Imprt - imprt an image file, dcument lad file, r prductin file int a specific flder. Highlight the flder, pint t Imprt, and select a file type. If yu have metadata, natives and images t lad, run the lad file imprt first, then the image file imprt. See Imprting thrugh the RDC n page 11. Exprt - exprt a specific flder, r a flder and its subflders.. Relativity Desktp Client Guide - 7

8 1.3 Starting the RDC T pen the RDC: 1. Duble-click n the shrtcut installed n yur desktp. The Settings dialg bx appears when yu pen the applicatin fr first time. 2. Select r enter settings fr the fllwing ptins: Frce Flder Preview Default - ptins t enable r disable this feature. When enabled, the RDC checks the first 1000 recrds f the lad file after yu click Imprt. It then displays the number f flders sn t be created. Yu can use this infrmatin t ensure that the lad prcess is behaving as expected. If a large number f flders are listed, yu can stp the lad file, and verify that the Flder Inf field is set crrectly. By default, this feature is Enabled. See Imprting thrugh the RDC n page 11 WebService URL - enter the URL prvided by yur Relativity Administratr. This URL is used t establish a cnnectin between the RDC and yur server. If the URL path is entered incrrectly, yu are unable t cnnect the RDC t yur database. The WebService URL has the frmat http r When yu display a Relativity page, yu see the web service name listed in the address bar n the brwser. Fr example, if the address bar displayed then yur web service URL wuld be RelativityWebAPI/. In additin, yu can cnfirm this URL with yur Relativity admin. 3. Click OK. These settings are stred in yur machine registry and they are retained when yu upgrade the RDC. 1.4 Lgging n t the RDC T lg in, enter yur Lgin name and Passwrd. These are the same credentials yu use t lg in t Relativity. Relativity Desktp Client Guide - 8

9 After yu lg in, the RDC displays a list f wrkspaces where yu have access rights. Use the filter bar t narrw the list. Nte: By default, a wildcard is used t filter wrkspaces in the RDC. Fr example, enter ELA t find wrkspaces named ELAN and Relativity. Highlight yur wrkspace and click OK t pen it in the RDC. The flder structure f yur wrkspace displays. A new wrkspace cntains nly a rt flder, while an existing wrkspace may cntain subflders that yu can display by clicking the plus sign. Nte: In Relativity Desktp Client, Dcument is selected by default as the type f bject fr data imprt r exprt. Yu can als select ther bject types, including Relativity Dynamic Objects. 2 Using the RDC installer T use the RDC, yu must dwnlad a cpy f the RDC installer. T dwnlad the RDC installer: 1. Open yur wrkspace in Relativity. 2. Select the Administratin tab. 3. Click Wrkspace Details t display the Relativity Utilities Cnsle. 4. Under the Relativity Dwnlads selectin, click Relativity Desktp Client (32-bit) r Relativity Desktp Client (64-bit) depending n yur perating system cnfiguratin. Relativity Desktp Client Guide - 9

10 5. Cmplete the steps fr installing the RDC. See Installing the RDC belw fr mre infrmatin. 2.1 Sftware requirements The RDC 9.2 r higher requires that Micrsft.NET 4.5 and Micrsft Visual C SP1 Redistributable is installed n the wrkstatin. Fr additinal infrmatin, see the System Requirements guide. Yur perating system determines whether yu need t dwnlad the 64-bit r 32-bit versin f these applicatins: If yu're running a 32-bit machine, yu must install the RDC 32-bit and the Visual C SP1 x86 Redistributable. If yu're running a 64-bit machine, yu want t install the RDC 64-bit and the Visual C SP1 x64 Redistributable. Yu may ntice a significant imprvement in the speed f the RDC with the 64-bit versin. Hwever, a 64-bit machine can have bth the x86 and x64 redistributables installed at the same time, and it can run the 32-bit r 64-bit versin f the RDC. 2.2 Installing the RDC T install the RDC: 1. Click Run n the File Dwnlad dialg, and n any security messages. 2. Click Next n the RDC setup wizard t start the installatin. 3. Select n ne f the fllwing ptins n the Chse Setup Type dialg: Typical installs the mst cmmn prgram features. There is n difference between typical and cmplete setups. Custm prvides ptins t chse applicatin features and lcatin where they will be installed: Yu can click n the icns in the tree t select the features that yu want t install. Click Reset if yu want t redisplay the default settings. Yu can als use the Disk Usage buttn t display the amunt disk space available and required fr the installatin. After yu have selected yur custm settings, click Next t display the Ready t Install dialg. Cmplete installs all applicatin features. There is n difference between typical and cmplete setups. 4. Click Install n the Ready t Install dialg t run the installatin wizard. 5. Click Finish when the setup is cmplete. Yur desktp displays a shrtcut icn fr the RDC. Relativity Desktp Client Guide - 10

11 2.3 Changing, repairing, r remving RDC installatin Yu can als run the installer t mdify, repair, r remve an existing installatin f the RDC. Run the installer n a machine where the applicatin is installed. Select ne f the fllwing ptins: Change - mdify the features that are installed. Repair - attempts t fix errrs in the mst recent installatin. Remve - uninstalls the RDC frm yur machine. 3 Imprting thrugh the RDC Yu can imprt dcument lad files as well as image and prductin files thrugh the Relativity Desktp Client (RDC). Yu need t install the RDC n yur cmputer befre yu can perfrm an exprt. Yu can als use the Windws Cmmand Line t imprt dcuments int Relativity. This allws yu t autmate dcument imprting alng with ther parts f yur prcessing and integratin prcess. See the Cmmand Line Imprt guide. T imprt thrugh the RDC, yu must be part f a grup that has the Allw Imprt admin peratin enabled in wrkspace permissins. Nte: Yu must be lgged in t a Relativity envirnment in rder t successfully imprt files. 3.1 Imprting multiple lad files simultaneusly Yu can safely imprt multiple lad files int the same wrkspace simultaneusly. Fr best results, use multiple machines and ne active instance f the RDC per machine. We recmmend limiting this t fur cncurrent imprts at a time int ne wrkspace. 3.2 Handling errrs Relativity skips any recrds with errrs that it encunters during the lad prcess. It warns yu abut any errrs that were encuntered after all the crrect recrds have laded. Relativity Desktp Client Guide - 11

12 When yu click OK in the errr warning bx, Relativity creates a new dcument-level lad file with nly the errneus recrds. This file lists all the errrs that ccurred during the lad prcess. Yu are prmpted t save these recrds t prevent any lss f data. Chse a path t save yur errr file and click OK. After yu have saved yur errr file, yu can make any necessary crrectins t thse recrds, and then perfrm an Append Lad. A recrd f these errrs is als available in the Errrs tab, referencing the wrkspace name and Artifact ID. 3.3 Saving imprt settings Yu can save the settings used t imprt a lad file. This ptin is helpful if yu frequently wrk with yur wn internal prcessing tls r with the same prcessing vendr. T save yur imprt settings, pint t the File menu, and click Save Imprt Settings. Chse a lcatin fr the dcument lad file (.kwe). Nte:.kwe stands fr kcura Win Edds. The settings fr the selected destinatin path and fr cpying files t a repsitry aren't saved in the.kwe file. When yu have an identically frmatted lad file, yu can use yur saved.kwe. In the RDC, pen the.kwe file, and select the file being laded. Yu can als update the path in the.kwe file. The fllwing illustratin displays the text f a.kwe file. The furth line cntains an abslute path t the dcument-level lad file t be laded. Update this sectin t pint t yur new lad file. After yu have updated yur.kwe file, select File and Lad Imprt Settings. Test fr any errrs, and then lad the file. Relativity Desktp Client Guide - 12

13 3.3.1 Saving a field map Yu can save the field mapping used t imprt a lad file. The field map is exprted as a CSV file that saves the mapping f the Relativity fields t thse in the dat file being imprted. Yu can save r view yur field map frm the Field Map tab r frm the File menu in the Imprt Dcument Lad File windw. T save yur field map: 1. Frm the Imprt Dcument Lad File windw, click View/Save Field Map. The Selected Field Map windw pens. Relativity Desktp Client Guide - 13

14 Relativity Desktp Client Guide - 14

15 2. Click Exprt t CSV. 3.4 Viewing audit infrmatin fr an imprt After yu imprt yur file, the RDC recrds and audits this instance in the Histry tab. Click Imprt t display the settings used fr the imprt. T view the transfer rate f the lad file, add the Executin Time field t the view, if necessary. 3.5 Lad file specificatins Using lad files, Relativity can lad the fllwing types f files: Metadata, extracted text, and native files Image and extracted text files Prcessed data These sectins detail the lad file requirements fr the respective file types Metadata, extracted text, and native files Metadata, dcument level extracted text, and natives files are laded int Relativity using a flat, dcument-level lad file. Each line shuld represent ne dcument Encding The Relativity Desktp Client (RDC) attempts t determine the encding f a file by default when a lad file is first selected. T d this, the RDC checks the byte rder mark at the beginning f the file. If there is n byte rder mark, it cannt determine the encding type. The types f byte rder marks include: Relativity Desktp Client Guide - 15

16 Unicde (UTF16) Big-Endian Unicde UTF8 Everything else will be cnsidered undetectable by the RDC and use the default encding chsen fr the lad file r stand-alne extracted text file. A variety f lad file encding ptins are supprted, including: Western Eurpean (Windws) Unicde Unicde (Big-Endian) Unicde (UTF-7) Unicde (UTF-8) Other ptins, based n yur SQL sever Header rw Relativity desn't require lad file header rws. Hwever, they are strngly recmmended t ensure accuracy. The field names in yur header dn't need t match the field names in yur wrkspace Fields Relativity desn't require any specific lad file field rder. Yu can create any number f wrkspace fields t stre metadata r cding. During the lad prcess, yu can match yur lad file fields t the fields in yur wrkspace. There is nly ne required field fr each lad the identifier. When lading new recrds, this is yur wrkspace identifier. When perfrming an verlay, yu can use the wrkspace identifier r select anther field as the identifier. This is useful when verlaying prductin data. Fr example, yu culd use the Bates number field rather than the dcument identifier in the wrkspace. All fields except Identifier are ptinal; hwever, yu may find sme f the fllwing system fields beneficial. 1. Identifier the unique identifier f the recrd 2. Grup Identifier the identifier f a dcument s family grup The grup identifier repeats fr all recrds in the grup. Usually, this is the dcument identifier f the grup s parent dcument. Fr example: If an with the dcument identifier f AS00001 has several attachments, the and its attachments have a grup identifier f AS If a grup identifier fr a recrd is nt set, the dcument identifier is used t ppulate the grup identifier field in the case. This effectively creates a grup f ne dcument. 3. MD5 Hash the duplicate hash value f the recrd Yu can enter any type f hash value (and rename the field in yur case). If dcuments share the same hash value, they are identified as a duplicate grup. Relativity Desktp Client Guide - 16

17 If a hash field fr a recrd is nt set, the dcument identifier is used t ppulate the hash field in the case. This effectively creates a grup f ne dcument. 4. Extracted Text The text f the dcument. Either the OCR r Full Text. The extracted text appears in the viewer and is added t search indexes. This field can cntain either: The actual OCR r Full Text The path t a dcument level text file cntaining the OCR r Full Text. 5. Native File Path the path t any native files yu d like t lad Bth relative and abslute paths are supprted. 6. Flder Inf builds the flder brwser structure fr the dcuments. This field is backslash \ delimited. If nt set, the dcuments are laded t the rt f the case. Each entry between backslashes is a flder in the Relativity flder brwser. Each backslash indicates a new subflder in the brwser. Nte: Fr example, if the lad file cntained the fllwing entry in the flder inf field: Slinger, Ryan\ \deleted_items Relativity wuld build the fllwing flder structure: Each dcument with the abve entry wuld be stred in the deleted_items flder. 7. Relativity Native Time Zne Offset - Relativity s native viewer technlgy displays all header dates and times in GMT. This numeric field ffsets hw header dates and times appear in the viewer. If the value in this field is blank, r 0, fr a dcument, then the header date and time appears in GMT. Yu can enter a whle number in this field psitive r negative t ffset the time frm GMT t the lcal time zne f the dcument. Fr example, if the dcument was cllected frm US CDT time, yu wuld enter -5 in the field, because the CDT ffset frm GMT is -5. Nte this ONLY applies when viewing header dates and times in the Relativity Native File Viewer. Yur metadata fields are displayed as imprted Accepted date frmats Relativity accepts date and time as ne field. Fr example, Date Sent and Time Sent shuld be ne field. If they are shipped separately, yu must create a new field fr time. Date fields can be frmatted t accept the date withut the time but nt the time withut the date. Dates can't have a zer value and shuld be frmatted in a standard date frmat such as 6/30/2017 1:23 PM r 6/30/ :23. Relativity Desktp Client Guide - 17

18 Nte: When yu imprt data using a lad file with a date frmat that differs frm the frmat used n yur lcal machine, Relativity adjusts the frmat in the lad file t match that set n yur machine. The table belw lists the date frmats recgnized by the Relativity Desktp Client and the Imprt API. It cntains bth valid and invalid date frmats: Entry in Lad File Object Type Definitin 12/31/ /31/9999 0:00 Mnday January /4/2010 0: :40 PM 6/30/ :08 The current year will be entered if the year is missing. 17:08:33 6/30/ :08 The current year will be entered if the year is missing. 17:08 6/30/ :08 The current year will be entered if the year is missing. 5:08 PM 6/30/ :08 The current year will be entered if the year is missing. 14-Apr 4/14/2009 0:00 The current year will be entered if the year is missing. 9-Apr 4/9/2009 0:00 The current year will be entered if the year is missing. 14-Mar 3/14/2009 0:00 The current year will be entered if the year is missing. 1-Mar 3/1/2009 0:00 The current year will be entered if the year is missing. 22-Feb 2/22/2009 0:00 The current year will be entered if the year is missing /20/2008 0: :22:00 AM 4/20/2008 0:00 4/9/ :13 4/9/ :13 4/9/2008 8:49 4/9/2008 8:49 9-Apr-08 4/9/2008 0:00 Apr. 9, 08 4/9/2008 0: /9/2008 0: /9/2008 0:00 4/9/2008 4/9/2008 0:00 4;9;2008 4/9/2008 0:00 Wednesday, 09 April /9/2008 0: /31/ :00 AM T17:45: :00 11/28/2014 0:00 4/9/08 13:30 PM Results in an errr Results in an errr Relativity Desktp Client Guide - 18

19 Entry in Lad File Object Type Definitin 4/9/ :22:00 a.m. Results in an errr 00/00/0000 Results in an errr unless the CreateErrrFrInvalidDate cnfiguratin value is set t False. In additin, Relativity takes int accunt the reginal settings f the SQL server where the database resides. Fr example, yu may have an SQL server residing in the UK that uses the date frmat DD/MM/YYYY, such as 4/9/2011. When yu access a wrkspace n a PC with UK reginal settings, the date appears as 4/9/2011. When yu access the same wrkspace n a PC with US reginal settings, the date appears as 9/4/ Delimiters During imprt, Relativity allws yu t designate which delimiters are used in yur lad file. Yu can select each delimiter frm the ASCII characters, The delimiter characters have the fllwing functins: Clumn separates lad file clumns Qute marks the beginning and end f each lad file field (als knwn as a text qualifier) Newline marks the end f a line in any extracted r lng text field Multi-value separates distinct values in a clumn. This delimiter is nly used when imprting int a Relativity multi-chice field. Nested-values dentes the hierarchy f a chice. This delimiter is nly used when imprting int a Relativity multi-chice field. Nte: Fr example, say a lad file cntained the fllwing entry, and was being imprted int a multi-chice field: Ht\Really Ht\Super Ht; Lk at Later With the multi-value delimiter set as ; and the nested value delimiter set as \", the chices wuld appear in Relativity as: Default delimiters If yu generate yur wn lad files, yu may chse t use Relativity s defaults: Clumn - ASCII 020 Qute - ASCII 254 Newline - ASCII 174 Relativity Desktp Client Guide - 19

20 Multi-Value - ASCII 059 Nested Values - ASCII Image and extracted text files Fr image imprts, Relativity requires Opticn lad files with ANSI/Western Eurpean encding. This.pt text file references the Cntrl ID n a page level. The first page shuld match up t any data yu intend t lad. Yu can use this same prcess fr imprting page-level extracted text. Relativity des nt supprt Unicde.pt files fr image imprts. When yu have a Unicde.pt file, yu must resave this file in ANSI/Western Eurpean encding. Yu must cnvert images in unsupprted frmats using a third-party cnversin tl befre Relativity can successfully uplad them Image file frmats Relativity accepts nly the fllwing file types fr image lads: Single page, Grup IV TIFs (1 bit, B&W) Single page JPGs Multi page TIFs and PDFs can be imprted int the system, but they must be laded as native files Lad file frmat The Opticn lad file is a page level lad file, with each line representing ne image. Belw is a sample: REL00001,REL01,D:\IMAGES\001\REL00001.TIF,Y,,,3 REL00002,REL01,D:\IMAGES\001\REL00002.TIF,,,, REL00003,REL01,D:\IMAGES\001\REL00003.TIF,,,, REL00004,REL01,D:\IMAGES\001\REL00004.TIF,Y,,,2 REL00005,REL01,D:\IMAGES\001\REL00005.TIF,,,, The fields are, frm left t right: Field One (REL00001) the page identifier Field Tw (REL01) the vlume identifier is nt required. Hwever, yu must include a space in each line f the lad file fr this field as illustrated belw: REL00001,,D:\IMAGES\001\REL00001.TIF,Y,,,3 REL00002,,D:\IMAGES\001\REL00002.TIF,,,, Field Three (D:\IMAGES\001\REL00001.TIF) a path t the image t be laded Field Fur (Y) Dcument marker a Y indicates the start f a unique dcument. Field Five (blank) can be used t indicate bx Field Six (blank) can be used t indicate flder Field Seven (3) ften used t stre page cunt, but unused in Relativity Relativity Desktp Client Guide - 20

21 Imprting extracted text during an image lad Yu can als imprt extracted text during the image imprt prcess by setting an ptin in the Relativity Desktp Client. Fr mre infrmatin abut imprting extracted text during an image lad, see the Relativity Administratr Guide. N changes are needed in the Opticn lad file. If the afrementined setting is active, Relativity lks fr page level txt files named identical t their crrespnding TIFs. Fr example: Prcessed data Sme data riginates frm client files and needs prcessing t extract the metadata. The fllwing table shws the delimiters that yur internal prcessing sftware must use t present data as fields. Value Character ASCII Number Clumn 020 Qute þ 254 Newline 174 Multi-Value ; 059 Nested Value \ 092 Yu can prvide this list t yur vendr t help cmmunicate the required delivery frmat fr lad files. The fielded data shuld be delivered as delimited files with clumn r field names lcated in the first line. Relativity Desktp Client Guide - 21

22 3.6 Imprting dcument metadata, files, and extracted text Yu can use a dcument-level lad file t imprt dcument metadata, native files, and extracted text. Fr large data sets, cnsider breaking the lad file int smaller dcument cunts and using multiple cmputers and instances t lad the individual lad files. It may be helpful t break up the types f infrmatin int distinct subgrups, such as lad metadata, natives, text, and images. Lading data in smaller amunts can assist with quality assurance. In additin, yu may see warning r errrs during an imprt under the fllwing cnditins: Native file with 0 KB - The RDC imprts nly metadata fr native files with the size f 0 KB. In the RDC, the Warnings tab displays a message indicating that the file is empty and nly metadata has been laded fr the recrd. In the viewer, users see extracted text when it exists fr the file. If the file has n extracted text, users see a blank placehlder, and n image r viewer ptins are available. See Cnfiguring the RDC n page 74. Lng file path names - If the lad file cntains a field used t set the flder path n the flders brwser, and the field is lnger than 255 characters fr a dcument, the RDC displays an errr message fr that dcument n the Errrs tab. The RDC als desn't imprt the dcument int Relativity. The RDC cntinues t imprt any ther dcuments in the lad file with fields shrter than 255 characters Imprting dcuments T imprt thrugh the RDC, yu must be part f a grup that has the Allw Imprt admin peratin enabled in wrkspace permissins. Use the fllwing steps t imprt dcuments: 1. Open the RDC and select a wrkspace. 2. On the Tls menu, pint t Imprt and click Dcument Lad File. (In the RDC brwser, yu can rightclick n a specific flder, pint t Imprt and click Lad File.) The Lad File tab in the Imprt Dcument Lad File windw appears. Relativity Desktp Client Guide - 22

23 3. (Optinal) T use settings in frm an existing imprt file, use these steps: a. On the Imprt Dcument Lad File dialg, click the File menu, and select Lad Imprt Settings. b. Brwse fr yur lad field map file (.kwe) in the Open Saved Field Map dialg, and click Open. c. Click OK n the kcura.edds.winfrm dialg. Click Open n Chse Lad File dialg. Settings frm the file are used t ppulate fields in the Lad File and Field Map tabs. (Yu can als mdify any settings n these tabs as necessary.) d. Cntinue with step On the Lad File tab, click t brwse fr a dcument lad file. Next, set the ther ptins as necessary. On the Lad File tab, set the fllwing ptins t indicate hw yur lad file is cnfigured: First line cntains clumn names select this ptin if yur lad file has a header. Relativity Desktp Client Guide - 23

24 Start Line - select the line number in the lad file where yu want the imprt prcess t begin. The default value is 0, which results in lading the entire file. File Encding - select an encding fr the dcument lad file. (Cnsult yur prcessing vendr r department t determine the crrect encding ptin, if necessary.) If yur file cntains a language ther than English, chse a Unicde ptin. Click fr additinal infrmatin abut encding. fr additinal ptins r click Review the fllwing infrmatin abut hw the encding f lad files is handled: Relativity uses aut-detectin t determine the encding f yur text files. If it finds a different file type in yur text files, it changes t the apprpriate methd. Relativity immediately applies any changes that yu make t the encding f a lad file, and displays these changes in the clumn header preview. Relativity prvides yu with the ability t audit the encding f a lad file. Relativity includes the functinality fr previewing the imprt file as well as the encding f the extracted text files. File Clumn Headers - Relativity autmatically updates this sectin f the Lad File tab when yu select the file encding. This sectin may display the fllwing message befre yu select an encding fr the lad file: After yu select the encding, this sectin displays the fields in the lad file. The clumn headers in the file shuld display as vertical list. The fields are displayed in alphanumeric rder. The numeric value in parentheses indicates the psitin f the field within the file. Fr example, the cntrl number is the first clumn in this illustratin, while the Applicatin Name is secnd. Relativity Desktp Client Guide - 24

25 Since the lad file is parsed based n the delimiter set, yu may need t check delimiters used in the lad file if the clumn headers are nt lined up crrectly. Determine the delimiters used in the file, and then select them in the Character sectin f this tab. Characters - select the delimiters used by yur lad file: Clumn delimiter - select the character used t separate clumns Qute - select the character used as the text qualifier Newline - select the character used t indicate the end f a line in any extracted text r lng text field Multi-value delimiter - select the character used t separate chices within a field Nested value - select the character used t separate the different levels f a multi-chice hierarchy Fr example, yu might imprt a field with fllwing values: Ht\Really Ht\Super Ht; Lk at Later. Using a semi-cln (;) as a multi-value delimiter, and a backslash (\) as a nested value delimiter, Relativity displays the chices as illustrated belw: 5. Select the Field Map tab. Use the fllwing infrmatin t set the ptins available n this tab: On the Field Map tab, yu select the fields in yur lad file that yu want added t the database, and yu map them t specific wrkspace fields. The clumns displayed n this tab include: Wrkspace Fields - displays all fields available in yur wrkspace Lad File Fields - displays all fields available in the lad file Relativity Desktp Client Guide - 25

26 Yu must match fields frm the Wrkspace Fields and Lad File Fields clumns by mving them int the center clumns. T mve fields between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the fields. Only fields matched in the center clumns are laded int the wrkspace. Other fields in the Wrkspace and Lad File Fields clumns are ignred. Yu must always match the Cntrl Number r identifier field fr each lad file. In the fllwing example, the center clumns display the Cntrl Number (Identifier) in the wrkspace mapped t the Cntrl Number in the lad file. The Date field in the wrkspace is mapped t the Date Sent field in the lad file. During imprt, the data in the fields frm the file will be laded t their mapped fields in the wrkspace. Review these additinal guidelines when yu map fields fr a wrkspace and lad file: Befre imprting relatinal fields, review the Imprt Behavir ptin n the New r Edit Field frm. Yu can use this ptin t determine hw blank values are handled in relatinal fields. If yu are imprting a field that cntains mre than 200 chices, yu will see these chices autmatically displayed in a Ppup Picker. Yu will see an errr if duplicate chices exist fr the field. Yu d nt need t be cncerned abut the rw clrs displayed in the clumns r the rder in which the fields are mapped such as mapping the cntrl number befre the date. Neither f these issues effect hw the fields are displayed in Relativity, r hw users interact with them. Overwrite and Overlay identifiers: Relativity Desktp Client Guide - 26

27 In the Overwrite sectin, select ne f these ptins t indicate the type f lad: Append Only - lads nly new recrds Overlay Only - updates existing recrds nly. Yu must include a wrkspace identifier in an verlay lad. This field acts as a link indicating t Relativity where t imprt the data. Append/Overlay - adds new recrds and verlays data n existing recrds If yu are perfrming an verlay r append/verlay, select an Overlay Identifier t specify the field that links yur verlay lad file t the wrkspace. Nte: The fields in the drp-dwn menu are fixed-length fields with a manually-applied SQL index. This is NOT the same as adding the field t the full-text index. Cntact yur SQL database administratr t apply an index t a field. Multi-Select Field Overlay Behavir: The fllwing fields are nly available if yu select the Append / Overlay r Overlay nly Overwrite ptin: Merge Values - merges all values fr multi-chice and multi-bject fields in the lad file with crrespnding multi-chice and multi-ptin fields in the wrkspace regardless f the verlay behavir settings in the envirnment. Replace Values - replaces all values fr multi-chice and multi-bject fields in the lad file with crrespnding multi-chice and multi-ptin fields in the wrkspace regardless f the verlay behavir settings in the envirnment. Use Field Settings - merges r replaces all values fr multi-chice and multi-bject fields in the lad file with crrespnding multi-chice and multi-ptin fields in the wrkspace accrding t the verlay behavir settings in the envirnment. Flder Inf: In the Flder Inf sectin, select Flder Infrmatin Clumn if yu want t use a metadata field t build the flder structure fr the wrkspace. In the drp-dwn bx, chse the field that yu want Relativity t use fr building the flder structure. This field is cmmnly a surce r flder path field. All flders are built under the Imprt Destinatin flder. When building the flder structure, Relativity lks fr backslashes t indicate a new sub-flder. The fllwing flder structure wuld result frm a field cntaining field with the value UB Impairment\Accunts\Bunk Accunts: Befre imprting, yu can use the Preview Chices and Flders ptin t check the number f chices and flders created by imprting the recrds t the wrkspace. Nte: The number f flders reprted during preview is inaccurate if the flder name cntains a backslash. Avid using backslashes in flder names. Relativity Desktp Client Guide - 27

28 Nte: D nt select Flder Infrmatin Clumn if yu d nt want t build a flder structure based n metadata. When this ptin is nt selected, Relativity lads all dcuments directly int the flder indicated by the imprt destinatin. Native File Behavir: In the Native File Behavir sectin, select Lad Native Files if yu want t lad native files alng with database recrds. (D nt select this ptin if yu d nt have any native files t lad.) Nte: Yu can ignre the Repsitry ptin if yur files are n yur desktp r laptp, r if yu are a cnsulting partner lading data int kcura's hsting envirnment. In the Native file paths cntained in clumn drp-dwn bx, select a field frm yur lad file that cntains a relative r abslute path t the native files. If the native files reside in a Relativity-accessible lcatin, click Repsitry, and select ne f these ptins: Cpy files frm current lcatin t selected dcument repsitry select this ptin t cpy files frm the lcatin in the selected lad file field t the selected dcument repsitry. Nte: Yu can use the Default ptin t cnfigure an envirnment level. See the CpyFilesTRepsitry cnfiguratin value. D nt cpy files t a Relativity dcument repsitry select this ptin if the native files have already been cpied t their final lcatin, which is accessible by Relativity. Extracted Text: In the Extracted Text sectin, set the fllwing ptins t cntrl hw the Full Text r OCR is laded int the database. These ptins are nly available fr selectin if yu've mapped the Extracted Text field: Cell cntains file lcatin select this ptin if yur extracted text is in dcument-level text files, and yur lad file cntains a path t thse text files. Yu dn't need t select this ptin if a field in yur lad file cntains extracted text. Encding fr undetectable files select an encding fr the text file. Click fr additinal language ptins r click fr additinal infrmatin abut encding. Western Eurpean (Windws) indicates the Windws standard encding fr English. Unicde utilizes mre than 107,000 characters cvering 90 scripts. Unicde (Big-Endian) is the same as Unicde, except that the byte rder is reversed. Relativity Desktp Client Guide - 28

29 Unicde (UTF-7) represents Unicde text using a stream f ASCII characters t guarantee that the high bit will always be zer. Unicde (UTF-8) represents all characters in the Unicde character set using 8-bit bytes. Nte: A warning message is displayed if yu are missing infrmatin required t run the imprt. Update the settings fr the required ptins, and click Imprt File again. 6. (Optinal) T preview infrmatin abut the cntent that will be imprted t the wrkspace, select Imprt, and click ne f these ptins: Preview File displays the first 1000 dcuments in the lad file. Only mapped fields are shwn. Make sure that matched fields displayed in the preview are crrect. Preview Errrs checks all dcuments fr ptential lading errrs, but displays nly the first 1000 errrs. If yur file des nt cntain errrs, a n errrs message appears. Nte: Yu can use the errr reprt t crrect any errrs, and then yu can re-add the file t the RDC. Relativity will lad nly valid recrds. Recrds with errrs will be skipped and can be exprted fr crrectin and relad. See Handling errrs n page 11. Preview Chices and Flders displays the number f chices created in the brwser and the number f chices created by imprting the recrds. 7. On the Imprt menu, click Imprt File. Nte: If Frce flder preview is selected, a cnfirmatin message is displayed, which cntains infrmatin abut the number f flders that will be create. Click OK t cntinue with the imprt. Relativity Desktp Client Guide - 29

30 8. Review the prgress f the imprt. Yu can view the prgress f an imprt r exprt thrugh the RDC. Select the fllwing tabs t display specific infrmatin: Summary - displays general infrmatin abut the number f recrds prcessing, warnings, and errrs. The fllwing screen sht displays file prgress fr an imprt jb, but yu als see a similar dialg when exprting cntent. Errrs - lists any errrs encuntered during the lad. The Errrs tab displays any errrs that ccur when yu imprt r exprt cntent with the RDC. Nte: When yu run an imprt jb, the RDC imprts nly recrds with n errrs int the wrkspace. Prgress - displays a detailed view f the lad prgress. Warnings - displays infrmatin abut lading r cnnectin issues. Reprt - includes the fllwing files that yu can exprt: Exprt Errr Reprt - click this buttn t exprt a.csv file with a summary f errrs. Exprt Errr File - click this buttn t exprt a.dat file, which is a dcument-level lad file cntaining nly recrds with errrs. File Transfer Mde - displays the fllwing infrmatin: Web mde - this mde uses the web server and it is the standard. Direct mde - this mde prvides faster perfrmance, but requires a cnnectin t the netwrk hsting the data, as well as specific Windws grup permissins t be used. Cntact yur administratr fr mre infrmatin. Relativity Desktp Client Guide - 30

31 Nte: Fr deplyments that have multi-tenancy enabled, dn't give tenants Direct Mde access in the Relativity Desktp Client, as ding s will result in mre than ne tenant having access t the same BCP path, which culd then lead t interferences with lad files during imprt. Nte: SQL Insert Mde always shws Bulk. 9. (Optinal) T save yur imprt settings, pint t the File menu, and click Save Imprt Settings. Chse a lcatin fr the dcument lad file (.kwe). See Saving imprt settings n page Imprting Yes/N fields n dcuments T ensure that yu get the crrect results when imprting int Yes/N fields, use these guidelines: N values Imprt Yes/N fields cntaining any values except thse specified fr Yes values. Yes values Imprt Yes/N fields cntaining nly "Yes", "Y", "True", "T", and any nn-zer integer. (Fr example, if yu imprt an "X", the RDC assigns a value f "N" t the dcuments.) Null values Leave the Yes/N field empty. Nte: Yu can change the display values n a Yes/N field, but yur mdificatin desn t affect hw the RDC handles these values during a dcument imprt. 3.7 Imprting an image file Yu can imprt image lad files that are Opticn-frmatted page-level files. Relativity nly accepts single page, Grup IV TIFs, r JPGs. T imprt thrugh the RDC, yu must be part f a grup that has the Allw Imprt admin peratin enabled in wrkspace permissins. T imprt an image lad file: 1. Open the RDC and select a wrkspace. 2. On the Tls menu, pint t Imprt and click Image Lad File. (In the RDC brwser, yu can right-click n a specific flder, pint t Imprt and click Image File.) The Imprt Prductin Lad File dialg appears. 3. (Optinal) T use settings in an existing imprt file, cmplete these steps: a. On the Imprt Image Lad File dialg, click the Imprt menu, and select Lad Settings. b. Brwse fr yur lad settings file (.kwi) in the Open dialg, and click Open. Relativity Desktp Client Guide - 31

32 Nte: The RDC dentes all image and prductin imprt settings with a.kwi file extensin. Hwever, when yu select these file types t filter n when yu're chsing t save r lad the settings file, the RDC dentes these settings with a.kwx file extensin. c. Click OK n the kcura.edds.winfrm dialg. Click Open n Chse Lad File dialg. Settings frm the file are used t ppulate fields in the Imprt Image Lad File dialg. (Yu can als mdify the settings n this dialg as necessary.) d. Cntinue with step On the Imprt Image Lad File dialg, set the ptins as necessary. Select the fllwing ptins: Lad File - click t brwse fr yur page-level lad file. Relativity accepts Opticn frmat image lad files. Start Line - select the line number in the lad file where yu want the imprt prcess t begin. The default value is 0, which results in lading the entire file. Numbering - select ne f the fllwing ptins: Use lad file page IDs - default setting. Aut-number pages - select this ptin if page IDs in the prductin are nt unique. Fr example, yu might imprt a set f TIFFs that share a page identifier fr each recrd. The page identifiers are shared per dcument and are nt unique. The Aut-number pages ptin appends the 01,.02, and s n t the page-level identifier, creating a unique number per page. Nte: Enable Aut-number pages if yu are imprting prductins that use dcument level numbering withut page numbers, and include dcuments that cntain multiple pages. Select Mde - select ne f the fllwing ptins: Append Only - lad nly new recrds. Overlay Only - update existing recrds nly. Yu must include a wrkspace identifier in an verlay lad. This field acts as a link indicating t Relativity where t imprt the data. Append/Overlay - adds new recrds and verlays data n existing recrds. Nte: Select Append t imprt the extracted text and natives frm a.dat file. Select verlay when verlaying prductin images nt the existing dcuments. (Available Only fr Prductin Lad Files) Prductin - select a Relativity prductin that yu want t uplad images t. Only new, empty prductin sets appear in this list. (Available Only fr Prductin Lad Files) Overlay Identifier - select a field that stres verlaid dcument-level Bates infrmatin n the dcument. Relativity Desktp Client Guide - 32

33 Nte: The fields in the drp-dwn menu are fixed-length fields with a manually-applied SQL index. Nte that this is NOT the same as adding the field t the full-text index. Cntact yur SQL database administratr t apply an index t a field. Repsitry - if the native files reside in a Relativity-accessible lcatin, click Repsitry, and select ne f the fllwing ptins. (Yu can ignre this ptin if yur files are n yur desktp r laptp, r if yu are a cnsulting partner lading data int ur hsting envirnment.) Cpy files frm current lcatin t selected dcument repsitry - select this ptin t cpy files frm the lcatin in the selected lad file field t the selected dcument repsitry. Nte: Yu can use the Default ptin t cnfigure an envirnment level. See the Cnfiguratin Table guide. D nt cpy files t a Relativity dcument repsitry - select this ptin if the native files have already been cpied t their final lcatin, which is accessible by Relativity. (Available Only fr Image Lad Files) Lad Extracted Text - select this ptin t lad new text fr Prductin dcuments that may be revised based n redactins. The text files must be meet these requirements: Have.txt extensins Stred in the same directry as TIFF files, Named in the same way as the TIFF files (Available Only fr Image Lad Files) Encding fr undetectable files - select an encding fr the text file. Click fr additinal language ptins r click fr additinal infrmatin abut encding. Western Eurpean (Windws) - indicates the Windws standard encding fr English. Unicde - utilizes mre than 107,000 characters cvering 90 scripts. Unicde (Big-Endian) - is the same as Unicde, except that the byte rder is reversed. Unicde (UTF-7) - represents Unicde text using a stream f ASCII characters t guarantee that the high bit will always be zer. Unicde (UTF-8) - represents all characters in the Unicde character set using 8-bit bytes. 5. (Optinal) T view any errrs, click Imprt, and then Check Errrs. The preview dialg lists several tabs that may cntain infrmatin abut any errrs in yur imprt. See Handling errrs n page On the Imprt menu, click Imprt File. Relativity Desktp Client Guide - 33

34 7. Review the prgress f the imprt. Yu can view the prgress f an imprt r exprt thrugh the RDC. Select the fllwing tabs t display specific infrmatin: Summary - displays general infrmatin abut the number f recrds prcessing, warnings, and errrs. The fllwing screen sht displays file prgress fr an imprt jb, but yu als see a similar dialg when exprting cntent. Errrs - lists any errrs encuntered during the lad. The Errrs tab displays any errrs that ccur when yu imprt r exprt cntent with the RDC. Nte: When yu run an imprt jb, the RDC imprts nly recrds with n errrs int the wrkspace. Prgress - displays a detailed view f the lad prgress. Warnings - displays infrmatin abut lading r cnnectin issues. Reprt - includes the fllwing files that yu can exprt: Exprt Errr Reprt - click this buttn t exprt a.csv file with a summary f errrs. Exprt Errr File - click this buttn t exprt a.dat file, which is a dcument-level lad file cntaining nly recrds with errrs. File Transfer Mde - displays the fllwing infrmatin: Web mde - this mde uses the web server and it is the standard. Direct mde - this mde prvides faster perfrmance, but requires a cnnectin t the netwrk hsting the data, as well as specific Windws grup permissins t be used. Cntact yur administratr fr mre infrmatin. Relativity Desktp Client Guide - 34

35 Nte: Fr deplyments that have multi-tenancy enabled, dn't give tenants Direct Mde access in the Relativity Desktp Client, as ding s will result in mre than ne tenant having access t the same BCP path, which culd then lead t interferences with lad files during imprt. Nte: SQL Insert Mde always shws Bulk. 8. (Optinal) T save yur imprt settings, pint t the File menu, and click Save Imprt Settings. Chse a lcatin fr the prductin lad file (.kwi). See Saving imprt settings n page Imprting a prductin file Yu can imprt prductins executed in an external tl t a Relativity wrkspace. Fllw these guidelines when yu want t wrk with externally executed prductin: Create a prductin set in Relativity. The numbering imprted with the Opticn file functins as Bates numbering. (The Bates label setting in the imprted prductin is nt used.) Run the prductin with the external tl t generate the fllwing files: Dcument level cntrl file - it shuld minimally cntain an identifier field that is als present in the wrkspace, and a new prductin r Bates number. Nte: When lading a prductin set int Relativity, yu may map a prductin numbering field t the identifier field, as lng as it is unique. Page level Opticn file - it shuld use the prductin r Bates numbering scheme. Overlay dcument level lad file in Relativity. T imprt thrugh the RDC, yu must be part f a grup that has the Allw Imprt admin peratin enabled in wrkspace permissins. T imprt a prductin, use these steps: 1. Open the RDC and select a wrkspace. 2. On the Tls menu, pint t Imprt and click Prductin Lad File. (In the RDC brwser, yu can rightclick n a specific flder, pint t Imprt and click Prductin File.) The Imprt Prductin Lad File dialg is displayed. 3. (Optinal) T use settings in an existing imprt file, cmplete these steps: a. On the Imprt Prductin Lad File dialg, click the Imprt menu, and select Lad Settings. b. Brwse fr yur lad settings file (.kwi) in the Open dialg, and click Open. Relativity Desktp Client Guide - 35

36 Nte: The RDC dentes all image and prductin imprt settings with a.kwi file extensin. Hwever, when yu select these file types t filter n when yu're chsing t save r lad the settings file, the RDC dentes these settings with a.kwx file extensin. c. Click OK n the kcura.edds.winfrm dialg. Click Open n Chse Lad File dialg. Settings frm the file are used t ppulate fields in the Imprt Prductin Lad File dialg. (Yu can als mdify the settings n this dialg as necessary.) d. Cntinue with step On the Imprt Prductin Lad File dialg, set the ptins as necessary. Lad File - click t brwse fr yur page-level lad file. Relativity accepts Opticn frmat image lad files. Start Line - select the line number in the lad file where yu want the imprt prcess t begin. The default value is 0, which results in lading the entire file. Numbering - select ne f the fllwing ptins: Use lad file page IDs - default setting. Aut-number pages - select this ptin if page IDs in the prductin are nt unique. Fr example, yu might imprt a set f TIFFs that share a page identifier fr each recrd. The page identifiers are shared per dcument and are nt unique. The Aut-number pages ptin appends the 01,.02, and s n t the page-level identifier, creating a unique number per page. Nte: Enable Aut-number pages if yu are imprting prductins that use dcument level numbering withut page numbers, and include dcuments that cntain multiple pages. Select Mde - select ne f the fllwing ptins: Append Only - lad nly new recrds. Overlay Only - update existing recrds nly. Yu must include a wrkspace identifier in an verlay lad. This field acts as a link indicating t Relativity where t imprt the data. Append/Overlay - adds new recrds and verlays data n existing recrds. Nte: Select Append t imprt the extracted text and natives frm a.dat file. Select verlay when verlaying prductin images nt the existing dcuments. (Available Only fr Prductin Lad Files) Prductin - select a Relativity prductin that yu want t uplad images t. Only new, empty prductin sets appear in this list. (Available Only fr Prductin Lad Files) Overlay Identifier - select a field that stres verlaid dcument-level Bates infrmatin n the dcument. Relativity Desktp Client Guide - 36

37 Nte: The fields in the drp-dwn menu are fixed-length fields with a manually-applied SQL index. Nte that this is NOT the same as adding the field t the full-text index. Cntact yur SQL database administratr t apply an index t a field. Repsitry - if the native files reside in a Relativity-accessible lcatin, click Repsitry, and select ne f the fllwing ptins. (Yu can ignre this ptin if yur files are n yur desktp r laptp, r if yu are a cnsulting partner lading data int ur hsting envirnment.) Cpy files frm current lcatin t selected dcument repsitry - select this ptin t cpy files frm the lcatin in the selected lad file field t the selected dcument repsitry. Nte: Yu can use the Default ptin t cnfigure an envirnment level. See the Cnfiguratin Table guide. D nt cpy files t a Relativity dcument repsitry - select this ptin if the native files have already been cpied t their final lcatin, which is accessible by Relativity. (Available Only fr Image Lad Files) Lad Extracted Text - select this ptin t lad new text fr Prductin dcuments that may be revised based n redactins. The text files must be meet these requirements: Have.txt extensins Stred in the same directry as TIFF files, Named in the same way as the TIFF files (Available Only fr Image Lad Files) Encding fr undetectable files - select an encding fr the text file. Click fr additinal language ptins r click fr additinal infrmatin abut encding. Western Eurpean (Windws) - indicates the Windws standard encding fr English. Unicde - utilizes mre than 107,000 characters cvering 90 scripts. Unicde (Big-Endian) - is the same as Unicde, except that the byte rder is reversed. Unicde (UTF-7) - represents Unicde text using a stream f ASCII characters t guarantee that the high bit will always be zer. Unicde (UTF-8) - represents all characters in the Unicde character set using 8-bit bytes. 5. (Optinal) T view any errrs, click Imprt, and then Check Errrs. The preview dialg lists several tabs that may cntain infrmatin abut any errrs in yur imprt. See Handling errrs n page On the Imprt menu, click Imprt File. Relativity Desktp Client Guide - 37

38 7. Review the prgress f the imprt. Yu can view the prgress f an imprt r exprt thrugh the RDC. Select the fllwing tabs t display specific infrmatin: Summary - displays general infrmatin abut the number f recrds prcessing, warnings, and errrs. The fllwing screen sht displays file prgress fr an imprt jb, but yu als see a similar dialg when exprting cntent. Errrs - lists any errrs encuntered during the lad. The Errrs tab displays any errrs that ccur when yu imprt r exprt cntent with the RDC. Nte: When yu run an imprt jb, the RDC imprts nly recrds with n errrs int the wrkspace. Prgress - displays a detailed view f the lad prgress. Warnings - displays infrmatin abut lading r cnnectin issues. Reprt - includes the fllwing files that yu can exprt: Exprt Errr Reprt - click this buttn t exprt a.csv file with a summary f errrs. Exprt Errr File - click this buttn t exprt a.dat file, which is a dcument-level lad file cntaining nly recrds with errrs. File Transfer Mde - displays the fllwing infrmatin: Web mde - this mde uses the web server and it is the standard. Direct mde - this mde prvides faster perfrmance, but requires a cnnectin t the netwrk hsting the data, as well as specific Windws grup permissins t be used. Cntact yur administratr fr mre infrmatin. Relativity Desktp Client Guide - 38

39 Nte: Fr deplyments that have multi-tenancy enabled, dn't give tenants Direct Mde access in the Relativity Desktp Client, as ding s will result in mre than ne tenant having access t the same BCP path, which culd then lead t interferences with lad files during imprt. Nte: SQL Insert Mde always shws Bulk. 8. (Optinal) T save yur imprt settings, pint t the File menu, and click Save Imprt Settings. Chse a lcatin fr the prductin lad file (.kwi). See Saving imprt settings n page Imprt errrs fr Desktp Client The fllwing table lists the mst cmmn imprt errrs fund in the Relativity Desktp Client, including their messages and fixes. Message Invalid date. Invalid blean. Invalid decimal. Invalid integer. Input length exceeds maximum set length f <max length> fr this VarChar field. Input length exceeds maximum set length f <max length> fr the assciated bject field <name>. Errr uplading file. Skipping line. File uplad failed. Either the access t the path is denied r there is n disk space available. File '<file name>' nt fund. File '<file name>' cntains 0 bytes. Identity Value nt set. Chice name specified twice fr this recrd. Prpsed chice name exceeds 200 characters. User des nt exist in the system r is nt available fr assignment. Dcument has been previusly prcessed in this file Errr: full text file specified des nt exist. There are an invalid number f cells in this rw - expecting:<expected>, actual:<actual>. Fix Change date infrmatin t ne f standard date frmats Change data t YES r NO frmat Change data t valid number Change data t integer Increase character restrictin n field Increase character size f assciated bject Verify and crrect line infrmatin Verify disk space is available and check permissins n data server Verify file is available in path prvided N data exists in file The identity field has nt been mapped. Map the identity field. Tw chice name fields are titled identically. Each chice name shuld be unique frm all thers in the lad file. Rename the specified chice t smething less than 200 characters. used in the custdian file is nt assciated with any custdian in the system. Same ID trying t lad twice Verify path f extracted text file Remve extra clumn delimiter frm lad file - This dcument identifier des nt exist in the sys- Overlay unavailable. Yu must append the data. Relativity Desktp Client Guide - 39

40 Message tem - n dcument t verwrite A dcument with identifier <dcument identifier> already exists in the system This file identifier exists attached t anther dcument with selected key field {0} This file identifier exists attached t anther dcument with selected ArtifactID {0} This file identifier exists attached t anther dcument Dcument is already in the selected prductin Fix The identifier field already exists in the system. Yu need t d an verlay t verwrite the existing data. Same ID trying t lad twice Same ID trying t lad twice Duplicate page ID in different dcument Bates number is already laded This dcument cntains redactins r highlights that can't be verwritten There is n image specified n this line One f the files specified fr this dcument des nt exist The image file specified is nt a supprted frmat in Relativity The file being upladed is empty The identifier field fr this rw is either empty r unmapped The identifier specified n this line has been previusly specified in the file The dcument specified has been secured fr editing. Yur accunt des nt have rights t add a dcument r bject t this case A nn-unique assciated bject is specified fr this new bject. Yur accunt des nt have rights t add an assciated bject t the current bject. An bject field references a child bject which des nt exist. This recrd's Overlay Identifier is shared by multiple dcuments in the case, and cannt be imprted. Because yu can't verlay int an existing prductin, yu must create a new prductin r replace the images manually n the back end. Delete the markups Make sure image id is present in lad file Make sure image files are present fr represented path This can't be laded withut cnversin t an apprved frmat N data exists in file s it can't be laded Verify that an identifier exists Make sure the identifier field is unique r verlay data Change security permissins t allw dcument edit rights Change security permissins t allw dcument add rights Tw bjects with the same name exist in the wrkspace. Identify the duplicates and change ne f their names. Change security permissins t allw updates t bject Add child bject Use a unique ID t verlay the data Relativity Desktp Client Guide - 40

41 4 Exprting with the RDC Yu can use the Relativity Desktp Client (RDC) t exprt prductin sets, search results, and flders. When yu perfrm an exprt, the RDC autmatically creates tp-level flders fr images, text, and natives as illustrated belw. The RDC exprts all dcuments included in the prductin set, search result, r flder. T exprt thrugh the RDC, yu must be part f a grup that has the Allw Exprt admin peratin enabled in wrkspace permissins. Nte: Yu need t install the RDC n yur cmputer befre yu can perfrm an exprt. 4.1 Technical cnsideratins fr.kwx files Nte the fllwing:.kwx stands fr kcura Win edds exprt. The.kwx file yu call n when yu lad exprt settings is a SOAP-serialized file that is used t run the exprt. SOAP is a prtcl based n XML, designed specifically t transprt r stre prcedure calls using XML by cnverting fields and prperties f an bject int the serial frmat f an XML stream. When yu run an exprt, the RDC cllects all the inputs frm the frm int an bject in memry, and passes the bject n t the exprt prcess. When yu save an exprt settings bject, Relativity passes that bject in memry t a SOAP serializer, which writes that bject s settings t XML. When yu lad exprt settings, Relativity takes a serialized bjects, deserializes it t an in-memry settings bject, and lps ver all the prperties and sets the actual frm values t reflect thse settings. 4.2 Exprting a prductin set Yu can exprt the cntents f a prductin set created in Relativity thrugh the RDC. T exprt thrugh the RDC, yu must be part f a grup that has the Allw Exprt admin peratin enabled in wrkspace permissins. Relativity Desktp Client Guide - 41

42 T exprt a prductin set: 1. Open the RDC and select a wrkspace. 2. On the Tls menu, pint t Exprt and click Prductin Set. The Data Surce tab in the Exprt Prductin windw appears. 3. (Optinal) T use settings in an existing exprt file, use these steps: a. Click the File menu, and select Lad Exprt Settings. b. Brwse fr yur exprt settings file (.kwx) in the Open dialg. c. Select a prductin set, and click OK. Yur prductin set is listed n the Data Surce tab, and the settings frm the file are used t ppulate the Destinatin Files tab. (Yu can als mdify any settings n the Data Surce and Destinatin Files tab as necessary.) Nte: On the Destinatin Files tab, yu may want t select Overwrite Files if yu're re-exprting the same grup f files t the previusly used lcatin. d. Cntinue with step On the Data Surce, select a prductin set in the Prductins bx. Update the remaining ptins as necessary. Relativity Desktp Client Guide - 42

43 The Data Surce tab appears when yu select the ptin t exprt prductin sets, saved searches, flders, and subflders. Yu will see similar ptins n the tab fr each f these actins, but yu may want t select different settings fr them. The fllwing screensht uses a prductin set as an example, but the settings are the same when exprting prductin sets, saved searches, flders, and subflders. On the Data Surce tab, yu can set the fllwing ptins fr the data that yu want t exprt. Depending n the type f data yu want t exprt, the drpdwn updates accrdingly. Select frm the fllwing: Views - Flders and subflders - select a view fr the data that yu want t exprt. Searches - Saved Search - select a saved search yu want t exprt. Prductins - Prductin set - select a prductin set yu want t exprt Views - select a view fr the data that yu want t exprt. Selected Clumns - chse the fields that yu want t exprt by mving them t the Selected Clumns bx. The bx n the right displays all available fields, but nly thse mved t the Selected Clumns bx are exprted. Start Exprt at Recrd # select a recrd number that identifies the initial dcument fr exprt. The RDC will begin by exprting the dcument with this recrd number and cntinue by exprting dcuments with subsequent recrd numbers. (Available nly fr Saved Searches, Flders, and Subflders) Prductin Precedence - click t display the Pick Prductin Precedence dialg where yu can select a grup f prduced dcuments fr exprt instead f the riginal images. Relativity Desktp Client Guide - 43

44 Select the images that yu want t exprt: Original Images - nly the riginal, nn-prduced images are exprted. Prduced Images - a prduced versin f the images is exprted. Include riginal images - riginal images fr the dcuments that are nt in a specified prductin are exprted. Mve the prductins that yu want t exprted t the Selected Prductins bx. T mve prductins between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the precedence f the fields. 5. Select the Destinatin Files tab. Nte: Only ne versin f each dcument will be prduced. If the dcument is in the tpmst prductin, that versin is exprted. If nt, Relativity checks fr the dcument in the secnd prductin and s n. If the dcument is nt a part f any f the selected prductins, and Include riginal images... is enabled, then the riginal dcument is prduced. On the Destinatin tab, yu can set ptins that cntrl hw the files in flders, searches, and prductin sets are exprted. The Exprt dialg displays this tab when yu select an Exprt ptin frm the Tls menu, r when yu right-click n a flder r wrkspace in the RDC. The Destinatin tab displays the same ptins when yu exprt files in flders, searches, r prductin sets. Relativity Desktp Client Guide - 44

45 Nte: In the Text and Native File Name sectin, the Named after ptin is available nly fr Prductin Sets. 6. Cmplete the fields n the Destinatin Files tab. See Fields n the Destinatin Files tab n page After yu have selected yur exprt settings, select File and click Run. Nte: A warning message is displayed if yu are missing infrmatin required t run the exprt. Update the settings fr the required ptins, and click Run again. 8. Review the prgress f the exprt. Yu can view the prgress f an imprt r exprt thrugh the RDC. Select the fllwing tabs t display specific infrmatin: Summary - displays general infrmatin abut the number f recrds prcessing, warnings, and errrs. The fllwing screen sht displays file prgress fr an imprt jb, but yu als see a similar dialg when exprting cntent. Relativity Desktp Client Guide - 45

46 Errrs - lists any errrs encuntered during the lad. The Errrs tab displays any errrs that ccur when yu imprt r exprt cntent with the RDC. Nte: When yu run an imprt jb, the RDC imprts nly recrds with n errrs int the wrkspace. Prgress - displays a detailed view f the lad prgress. Warnings - displays infrmatin abut lading r cnnectin issues. Reprt - includes the fllwing files that yu can exprt: Exprt Errr Reprt - click this buttn t exprt a.csv file with a summary f errrs. Exprt Errr File - click this buttn t exprt a.dat file, which is a dcument-level lad file cntaining nly recrds with errrs. File Transfer Mde - displays the fllwing infrmatin: Web mde - this mde uses the web server and it is the standard. Direct mde - this mde prvides faster perfrmance, but requires a cnnectin t the netwrk hsting the data, as well as specific Windws grup permissins t be used. Cntact yur administratr fr mre infrmatin. Nte: Fr deplyments that have multi-tenancy enabled, dn't give tenants Direct Mde access in the Relativity Desktp Client, as ding s will result in mre than ne tenant having access t the same BCP path, which culd then lead t interferences with lad files during imprt. Nte: SQL Insert Mde always shws Bulk. Relativity Desktp Client Guide - 46

47 9. (Optinal) T save yur exprt settings, pint t the File menu, and click Save Exprt Settings. Chse a lcatin fr the exprt settings file (.kwx) Fields n the Destinatin Files tab The Destinatin Files tab cntains the fllwing sectins with their respective fields: Exprt Lcatin - select a target directry fr exprting flders, searches, and prductin sets. Click t brwse fr a lcatin. Select Overwrite Files t verwrite any existing files f the same name in the target exprt directry. Physical File Exprt - can select Cpy Files Frm Repsitry ptin. By default, this ptin is selected, s files will be cpied frm the file server t the specified exprt lcatin. When the Cpy Files Frm Repsitry ptin is cleared, the files are nt be cpied t the exprt lcatin. Instead, the exprted lad files reference the repsitry lcatin f the files. Vlume Infrmatin - cntrls the naming and size f the vlume identifier. Set the fllwing ptins in this sectin: Prefix - enter the alpha prefix fr the vlume identifier. Start # - select the first number used fr the numeric sectin f the vlume identifier. If multiple vlumes are created during the exprt, the number will increment, creating unique vlume identifiers. # f Digits - select the number f digits attached t the prefix. (Fr example, if yu selected 2, the utput wuld be VOL001, VOL002, and s n.) Max size - select the maximum size allwed fr each vlume in MBs. Subdirectry Infrmatin - cntrls the naming and size f vlume subflders. Set the fllwing ptins in this sectin: Image Prefix - enter the alpha prefix fr the subdirectry used t stre exprted images. Native Prefix - enter the alpha prefix fr the subdirectry used t stre exprted native files. Text Prefix - enter the alpha prefix fr the subdirectry used t stre exprted extracted text files. Start # - select the starting number fr the subdirectries. # f Digits - select the number f digits attached t the subdirectry prefix (Fr example, if yu selected 3, the utput wuld be IMG001, IMG002, and s n.) Max Files - select the number f files that will be stred in each subdirectry. File Path - cntrls hw the exprt path fr the files is referenced. Select ne f the fllwing ptins: Use abslute paths - paths t exprted files are represented as abslute paths. C:\ Desktp\VOL001\NATIVE001\AS msg Use relative paths - paths t exprted files are represented as relative paths..\vol001\native001\as msg Use prefix - a prefix is added t the relative path, such as a CD drive letter. D:\VOL001\NATIVE001\AS msg Lad File Characters - select the delimiters that are used in a dcument-level lad file when Data File Frmat in the Metadata sectin is set t Custm. Select the fllwing ptins as necessary: Relativity Desktp Client Guide - 47

48 Clumn - this delimiter separates clumns in the lad file. Qute - this delimiter qualifies the text in each field f the lad file. Newline - this delimiter signifies the end f any extracted text r lng text field in the lad file. Multi-Value - this delimiter separates different chices within a chice field. Nested Value - this delimiter indicates the hierarchy f chices within a chice field. Text and Native File Names - select the fllwing ptins fr naming exprted native and extracted text files: (Available Only fr Prductin Sets) Named after - select ne f the fllwing naming cnventin fr exprted files: Identifier - select this ptin t name the files after identifier fr yur wrkspace. Beginning prductin number - select this ptin t name the files after the prductin number. (This number may be the Bates number fr a prductin.) Append riginal file - select this ptin t append the riginal name f the file t the end f the exprted file name. Image - determines whether t include images in an exprt and set the frmat f the lad file. Set the fllwing ptins: Check Exprt Images - select this ptin t included images in the exprt. (Yu must set the Data File Frmat and the File Type when images are exprted.) Data File Frmat - select ne f these frmats fr image-level lad file: Opticn IPRO File Type - select ne f these file types: Single-page TIF/JPG Multi-page TIF PDF Native - select Exprt Native Files if yu want native files exprted. Metadata - use the fllwing ptins t cntrl hw the dcument-level lad file and extracted text are exprted: Data File Frmat - select a the frmat fr the dcument-level lad file that is exprted: Cmma separated (.csv) Cncrdance (.dat) - lad file is exprted with the standard Cncrdance delimiters. Custm (.txt) - lad file is exprted with the custm delimiters that yu select in the Lad File Characters sectin. See Lad File Characters. HTML (.html) - lad file is in HTML and cntains hyperlinks used t launch any exprted files. Data File Encding - select an encding fr the dcument-level lad file frm the drp-dwn bx. Click fr additinal ptins. Exprt Text Field as Files - determines hw the extracted text r OCR will be exprted. Select this ptin if yu want the files exprted as individual dcument-level text files, with ne file per dcument. When this ptin is cleared, the text is included as part f yur lad file. Text File Encding - select the encding fr the dcument-level text files. Click fr additinal ptins. Relativity Desktp Client Guide - 48

49 Text Precedence - select and assign an rder t lng text fields that Relativity will check fr text when perfrming an exprt. Yu must select ne r mre lng text fields t use this functinality. Click t display the Pick Text Precedence pp-up. T mve fields between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the precedence f the fields. If yu added mre than ne field t the Selected Lng Text Fields clumn, Relativity will add the Text Precedence clumn as the last clumn in the lad file. During an exprt, Relativity checks the tpmst field in the Selected Lng Text Fields clumn fr text, and if the field is null, it checks the next field in rder f precedence fr text. When it finds a field that cntains text, Relativity adds the cntents f that field t the Text Precedence clumn in the dcument lad file, and then cntinues checking the fields fr the next dcument. Fr example, yu want the Text Precedence clumn in the lad file t cntain the cntents f the OCR Text field when it is available fr a dcument and the cntents f the Extracted Text field when the OCR Text fr a dcument is null. In the Pick Text Precedence pp-up, yu will need t add the OCR Text as the first field in the Selected Lng Text Fields clumn fllwed by the Extracted Text field. If yu select nly ne field in the Selected Lng Text Fields clumn, Relativity adds the text t a clumn with the same name as the field, and des nt create the Text Precedence clumn. Nte: If yu want t imprve exprt perfrmance, yu d nt need t add all f the lng text fields that yu selected in the Pick Text Precedence pp-up t the Selected Clumns ptin n the Data Surce tab. When yu d nt select these fields n the Data Surce tab, but yu d add them t Selected Lng Text Fields clumn, the cntent f these fields is added t the Text Precedence clumn as described abve. When yu add the lng text fields n the Data Surce tab, Relativity will als add these clumns t the dcument level lad file. Relativity Desktp Client Guide - 49

50 The Precedence Text clumn will display the file path t the exprted files if yu selected the Exprt Text Field as Files checkbx. Exprt Multiple-Chice Fields as Nested - select this ptin t maintain the hierarchy f Relativity multiple-chice lists, when applicable. Child chices are separated by the nested value delimiter, which is a backslash by default. 4.3 Exprting a saved search Yu can exprt the current results f a saved search thrugh the RDC. T exprt thrugh the RDC, yu must be part f a grup that has the Allw Exprt admin peratin enabled in wrkspace permissins. T exprt a saved search: 1. Open the RDC and select a wrkspace. 2. On the Tls menu, pint t Exprt and click Saved Search. The Data Surce tab in the Exprt Prductin windw appears. 3. (Optinal) T use settings in an existing exprt file cmplete these steps: a. Click thefile menu, and select Lad Exprt Settings. b. Brwse fr yur exprt settings file (.kwx) in the Open dialg. c. Select a saved search, and click OK. Yur saved search is listed n the Data Surce tab, and the settings frm the file are used t ppulate the Destinatin Files tab. (Yu can als mdify any settings n the Data Surce and Destinatin Files tab as necessary.) Nte: On the Destinatin Files tab, yu may want t select Overwrite Files if yu are re-exprting the same grup f files t the previusly used lcatin. Relativity Desktp Client Guide - 50

51 d. Cntinue with step On the Data Surce, select a saved search in the Searches bx. Update the remaining ptins as necessary. The Data Surce tab appears when yu select the ptin t exprt prductin sets, saved searches, flders, and subflders. Yu will see similar ptins n the tab fr each f these actins, but yu may want t select different settings fr them. The fllwing screensht uses a prductin set as an example, but the settings are the same when exprting prductin sets, saved searches, flders, and subflders. Relativity Desktp Client Guide - 51

52 On the Data Surce tab, yu can set the fllwing ptins fr the data that yu want t exprt. Depending n the type f data yu want t exprt, the drpdwn updates accrdingly. Select frm the fllwing: Views - Flders and subflders - select a view fr the data that yu want t exprt. Searches - Saved Search - select a saved search yu want t exprt. Prductins - Prductin set - select a prductin set yu want t exprt Views - select a view fr the data that yu want t exprt. Selected Clumns - chse the fields that yu want t exprt by mving them t the Selected Clumns bx. The bx n the right displays all available fields, but nly thse mved t the Selected Clumns bx are exprted. Start Exprt at Recrd # select a recrd number that identifies the initial dcument fr exprt. The RDC will begin by exprting the dcument with this recrd number and cntinue by exprting dcuments with subsequent recrd numbers. (Available nly fr Saved Searches, Flders, and Subflders) Prductin Precedence - click t display the Pick Prductin Precedence dialg where yu can select a grup f prduced dcuments fr exprt instead f the riginal images. Select the images that yu want t exprt: Original Images - nly the riginal, nn-prduced images are exprted. Prduced Images - a prduced versin f the images is exprted. Include riginal images - riginal images fr the dcuments that are nt in a specified prductin are exprted. Mve the prductins that yu want t exprted t the Selected Prductins bx. T mve prductins between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the precedence f the fields. Relativity Desktp Client Guide - 52

53 5. Select the Destinatin Files tab. Nte: Only ne versin f each dcument will be prduced. If the dcument is in the tpmst prductin, that versin is exprted. If nt, Relativity checks fr the dcument in the secnd prductin and s n. If the dcument is nt a part f any f the selected prductins, and Include riginal images... is enabled, then the riginal dcument is prduced. On the Destinatin tab, yu can set ptins that cntrl hw the files in flders, searches, and prductin sets are exprted. The Exprt dialg displays this tab when yu select an Exprt ptin frm the Tls menu, r when yu right-click n a flder r wrkspace in the RDC. The Destinatin tab displays the same ptins when yu exprt files in flders, searches, r prductin sets. Nte: In the Text and Native File Name sectin, the Named after ptin is available nly fr Prductin Sets. 6. Cmplete the fields n the Destinatin Files tab. See Fields n the Destinatin Files tab n page After yu have selected yur exprt settings, select File and click Run. Nte: A warning message is displayed if yu are missing infrmatin required t run the exprt. Update the settings fr the required ptins, and run the exprt again. 8. Review the prgress f the exprt. Yu can view the prgress f an imprt r exprt thrugh the RDC. Select the fllwing tabs t display specific infrmatin: Summary - displays general infrmatin abut the number f recrds prcessing, warnings, and errrs. The fllwing screen sht displays file prgress fr an imprt jb, but yu als see a Relativity Desktp Client Guide - 53

54 similar dialg when exprting cntent. Errrs - lists any errrs encuntered during the lad. The Errrs tab displays any errrs that ccur when yu imprt r exprt cntent with the RDC. Nte: When yu run an imprt jb, the RDC imprts nly recrds with n errrs int the wrkspace. Prgress - displays a detailed view f the lad prgress. Warnings - displays infrmatin abut lading r cnnectin issues. Reprt - includes the fllwing files that yu can exprt: Exprt Errr Reprt - click this buttn t exprt a.csv file with a summary f errrs. Exprt Errr File - click this buttn t exprt a.dat file, which is a dcument-level lad file cntaining nly recrds with errrs. File Transfer Mde - displays the fllwing infrmatin: Web mde - this mde uses the web server and it is the standard. Direct mde - this mde prvides faster perfrmance, but requires a cnnectin t the netwrk hsting the data, as well as specific Windws grup permissins t be used. Cntact yur administratr fr mre infrmatin. Nte: Fr deplyments that have multi-tenancy enabled, dn't give tenants Direct Mde access in the Relativity Desktp Client, as ding s will result in mre than ne tenant having access t the same BCP path, which culd then lead t interferences with lad files during imprt. Nte: SQL Insert Mde always shws Bulk. Relativity Desktp Client Guide - 54

55 9. (Optinal) T save yur exprt settings fr reuse, pint t the File menu, and click Save Exprt Settings. Chse a lcatin fr the exprt settings file (.kwx) Fields n the Destinatin Files tab The Destinatin Files tab cntains the fllwing sectins with their respective fields: Exprt Lcatin - select a target directry fr exprting flders, searches, and prductin sets. Click t brwse fr a lcatin. Select Overwrite Files t verwrite any existing files f the same name in the target exprt directry. Physical File Exprt - can select Cpy Files Frm Repsitry ptin. By default, this ptin is selected, s files will be cpied frm the file server t the specified exprt lcatin. When the Cpy Files Frm Repsitry ptin is cleared, the files are nt be cpied t the exprt lcatin. Instead, the exprted lad files reference the repsitry lcatin f the files. Vlume Infrmatin - cntrls the naming and size f the vlume identifier. Set the fllwing ptins in this sectin: Prefix - enter the alpha prefix fr the vlume identifier. Start # - select the first number used fr the numeric sectin f the vlume identifier. If multiple vlumes are created during the exprt, the number will increment, creating unique vlume identifiers. # f Digits - select the number f digits attached t the prefix. (Fr example, if yu selected 2, the utput wuld be VOL001, VOL002, and s n.) Max size - select the maximum size allwed fr each vlume in MBs. Subdirectry Infrmatin - cntrls the naming and size f vlume subflders. Set the fllwing ptins in this sectin: Image Prefix - enter the alpha prefix fr the subdirectry used t stre exprted images. Native Prefix - enter the alpha prefix fr the subdirectry used t stre exprted native files. Text Prefix - enter the alpha prefix fr the subdirectry used t stre exprted extracted text files. Start # - select the starting number fr the subdirectries. # f Digits - select the number f digits attached t the subdirectry prefix (Fr example, if yu selected 3, the utput wuld be IMG001, IMG002, and s n.) Max Files - select the number f files that will be stred in each subdirectry. File Path - cntrls hw the exprt path fr the files is referenced. Select ne f the fllwing ptins: Use abslute paths - paths t exprted files are represented as abslute paths. C:\ Desktp\VOL001\NATIVE001\AS msg Use relative paths - paths t exprted files are represented as relative paths..\vol001\native001\as msg Use prefix - a prefix is added t the relative path, such as a CD drive letter. D:\VOL001\NATIVE001\AS msg Lad File Characters - select the delimiters that are used in a dcument-level lad file when Data File Frmat in the Metadata sectin is set t Custm. Select the fllwing ptins as necessary: Relativity Desktp Client Guide - 55

56 Clumn - this delimiter separates clumns in the lad file. Qute - this delimiter qualifies the text in each field f the lad file. Newline - this delimiter signifies the end f any extracted text r lng text field in the lad file. Multi-Value - this delimiter separates different chices within a chice field. Nested Value - this delimiter indicates the hierarchy f chices within a chice field. Text and Native File Names - select the fllwing ptins fr naming exprted native and extracted text files: (Available Only fr Prductin Sets) Named after - select ne f the fllwing naming cnventin fr exprted files: Identifier - select this ptin t name the files after identifier fr yur wrkspace. Beginning prductin number - select this ptin t name the files after the prductin number. (This number may be the Bates number fr a prductin.) Append riginal file - select this ptin t append the riginal name f the file t the end f the exprted file name. Image - determines whether t include images in an exprt and set the frmat f the lad file. Set the fllwing ptins: Check Exprt Images - select this ptin t included images in the exprt. (Yu must set the Data File Frmat and the File Type when images are exprted.) Data File Frmat - select ne f these frmats fr image-level lad file: Opticn IPRO File Type - select ne f these file types: Single-page TIF/JPG Multi-page TIF PDF Native - select Exprt Native Files if yu want native files exprted. Metadata - use the fllwing ptins t cntrl hw the dcument-level lad file and extracted text are exprted: Data File Frmat - select a the frmat fr the dcument-level lad file that is exprted: Cmma separated (.csv) Cncrdance (.dat) - lad file is exprted with the standard Cncrdance delimiters. Custm (.txt) - lad file is exprted with the custm delimiters that yu select in the Lad File Characters sectin. See Lad File Characters. HTML (.html) - lad file is in HTML and cntains hyperlinks used t launch any exprted files. Data File Encding - select an encding fr the dcument-level lad file frm the drp-dwn bx. Click fr additinal ptins. Exprt Text Field as Files - determines hw the extracted text r OCR will be exprted. Select this ptin if yu want the files exprted as individual dcument-level text files, with ne file per dcument. When this ptin is cleared, the text is included as part f yur lad file. Text File Encding - select the encding fr the dcument-level text files. Click fr additinal ptins. Relativity Desktp Client Guide - 56

57 Text Precedence - select and assign an rder t lng text fields that Relativity will check fr text when perfrming an exprt. Yu must select ne r mre lng text fields t use this functinality. Click t display the Pick Text Precedence pp-up. T mve fields between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the precedence f the fields. If yu added mre than ne field t the Selected Lng Text Fields clumn, Relativity will add the Text Precedence clumn as the last clumn in the lad file. During an exprt, Relativity checks the tpmst field in the Selected Lng Text Fields clumn fr text, and if the field is null, it checks the next field in rder f precedence fr text. When it finds a field that cntains text, Relativity adds the cntents f that field t the Text Precedence clumn in the dcument lad file, and then cntinues checking the fields fr the next dcument. Fr example, yu want the Text Precedence clumn in the lad file t cntain the cntents f the OCR Text field when it is available fr a dcument and the cntents f the Extracted Text field when the OCR Text fr a dcument is null. In the Pick Text Precedence pp-up, yu will need t add the OCR Text as the first field in the Selected Lng Text Fields clumn fllwed by the Extracted Text field. If yu select nly ne field in the Selected Lng Text Fields clumn, Relativity adds the text t a clumn with the same name as the field, and des nt create the Text Precedence clumn. Nte: If yu want t imprve exprt perfrmance, yu d nt need t add all f the lng text fields that yu selected in the Pick Text Precedence pp-up t the Selected Clumns ptin n the Data Surce tab. When yu d nt select these fields n the Data Surce tab, but yu d add them t Selected Lng Text Fields clumn, the cntent f these fields is added t the Text Precedence clumn as described abve. When yu add the lng text fields n the Data Surce tab, Relativity will als add these clumns t the dcument level lad file. Relativity Desktp Client Guide - 57

58 The Precedence Text clumn will display the file path t the exprted files if yu selected the Exprt Text Field as Files checkbx. Exprt Multiple-Chice Fields as Nested - select this ptin t maintain the hierarchy f Relativity multiple-chice lists, when applicable. Child chices are separated by the nested value delimiter, which is a backslash by default. 4.4 Exprting a flder Yu can exprt the cntents f a specific wrkspace flder thrugh the RDC. Nte: T preserve yur current flder structure, yu have the ptin f running the Set Relativity flder path field script when yu're exprting a flder thrugh the RDC. T exprt thrugh the RDC, yu must be part f a grup that has the Allw Exprt admin peratin enabled in wrkspace permissins. Nte: When yu select the Flder ptin, nly the cntents f the current flder are exprted. Use Flder and Subflders ptin t exprt the cntents f bth the flder and its subflders, r the cntents f an entire wrkspace. See Exprting a flder and its subflders n page 66. T exprt a flder: 1. Open the RDC and select a wrkspace. 2. In the RDC brwser, right-click n a specific flder, pint t Exprt and click Flder. (Yu can als highlight a flder in the RDC brwser. On the Tls menu, pint t Exprt and click Flder.) The Data Surce tab in the Exprt Prductin windw appears. 3. (Optinal) T use settings in an existing exprt file, cmplete these steps: a. Click thefile menu, and select Lad Exprt Settings. b. Brwse fr yur exprt settings file (.kwx) in the Open dialg. c. Select a view, and click OK. Yur view is listed n the Data Surce tab, and determines the fields displayed in the Selected Clumns bx. Other settings frm the file are used t ppulate the Destinatin Files tab. (Yu can als mdify any settings n the Data Surce and Destinatin Files tab as necessary.) Nte: On the Destinatin Files tab, yu may want t select Overwrite Files if yu are re-exprting the same grup f files t the previusly used lcatin. Relativity Desktp Client Guide - 58

59 d. Cntinue with step On the Data Surce tab, select a view in the Views bx. Update the remaining ptins as necessary. The Data Surce tab appears when yu select the ptin t exprt prductin sets, saved searches, flders, and subflders. Yu will see similar ptins n the tab fr each f these actins, but yu may want t select different settings fr them. The fllwing screensht uses a prductin set as an example, but the settings are the same when exprting prductin sets, saved searches, flders, and subflders. On the Data Surce tab, yu can set the fllwing ptins fr the data that yu want t exprt. Depending n the type f data yu want t exprt, the drpdwn updates accrdingly. Select frm the fllwing: Views - Flders and subflders - select a view fr the data that yu want t exprt. Searches - Saved Search - select a saved search yu want t exprt. Relativity Desktp Client Guide - 59

60 Prductins - Prductin set - select a prductin set yu want t exprt Views - select a view fr the data that yu want t exprt. Selected Clumns - chse the fields that yu want t exprt by mving them t the Selected Clumns bx. The bx n the right displays all available fields, but nly thse mved t the Selected Clumns bx are exprted. Start Exprt at Recrd # select a recrd number that identifies the initial dcument fr exprt. The RDC will begin by exprting the dcument with this recrd number and cntinue by exprting dcuments with subsequent recrd numbers. (Available nly fr Saved Searches, Flders, and Subflders) Prductin Precedence - click t display the Pick Prductin Precedence dialg where yu can select a grup f prduced dcuments fr exprt instead f the riginal images. Select the images that yu want t exprt: Original Images - nly the riginal, nn-prduced images are exprted. Prduced Images - a prduced versin f the images is exprted. Include riginal images - riginal images fr the dcuments that are nt in a specified prductin are exprted. Mve the prductins that yu want t exprted t the Selected Prductins bx. T mve prductins between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the precedence f the fields. Nte: Only ne versin f each dcument will be prduced. If the dcument is in the tpmst prductin, that versin is exprted. If nt, Relativity checks fr the dcument in the secnd prductin and s n. If the dcument is nt a part f any f the selected prductins, and Include riginal images... is enabled, then the riginal dcument is prduced. Relativity Desktp Client Guide - 60

61 3. Select the Destinatin Files tab. On the Destinatin tab, yu can set ptins that cntrl hw the files in flders, searches, and prductin sets are exprted. The Exprt dialg displays this tab when yu select an Exprt ptin frm the Tls menu, r when yu right-click n a flder r wrkspace in the RDC. The Destinatin tab displays the same ptins when yu exprt files in flders, searches, r prductin sets. Nte: In the Text and Native File Name sectin, the Named after ptin is available nly fr Prductin Sets. 4. Cmplete the fields n the Destinatin Files tab. See Fields n the Destinatin Files tab n page After yu have selected yur exprt settings, select File and click Run. Nte: A warning message is displayed if yu are missing infrmatin required t run the exprt. Update the settings fr the required ptins, and run the exprt again. 6. Review the prgress f the exprt. Yu can view the prgress f an imprt r exprt thrugh the RDC. Select the fllwing tabs t display specific infrmatin: Summary - displays general infrmatin abut the number f recrds prcessing, warnings, and errrs. The fllwing screen sht displays file prgress fr an imprt jb, but yu als see a similar dialg when exprting cntent. Relativity Desktp Client Guide - 61

62 Errrs - lists any errrs encuntered during the lad. The Errrs tab displays any errrs that ccur when yu imprt r exprt cntent with the RDC. Nte: When yu run an imprt jb, the RDC imprts nly recrds with n errrs int the wrkspace. Prgress - displays a detailed view f the lad prgress. Warnings - displays infrmatin abut lading r cnnectin issues. Reprt - includes the fllwing files that yu can exprt: Exprt Errr Reprt - click this buttn t exprt a.csv file with a summary f errrs. Exprt Errr File - click this buttn t exprt a.dat file, which is a dcument-level lad file cntaining nly recrds with errrs. File Transfer Mde - displays the fllwing infrmatin: Web mde - this mde uses the web server and it is the standard. Direct mde - this mde prvides faster perfrmance, but requires a cnnectin t the netwrk hsting the data, as well as specific Windws grup permissins t be used. Cntact yur administratr fr mre infrmatin. Nte: Fr deplyments that have multi-tenancy enabled, dn't give tenants Direct Mde access in the Relativity Desktp Client, as ding s will result in mre than ne tenant having access t the same BCP path, which culd then lead t interferences with lad files during imprt. Nte: SQL Insert Mde always shws Bulk. Relativity Desktp Client Guide - 62

63 7. (Optinal) T save yur exprt settings, pint t the File menu, and click Save Exprt Settings. Chse a lcatin fr the exprt settings file (.kwx) Fields n the Destinatin Files tab The Destinatin Files tab cntains the fllwing sectins with their respective fields: Exprt Lcatin - select a target directry fr exprting flders, searches, and prductin sets. Click t brwse fr a lcatin. Select Overwrite Files t verwrite any existing files f the same name in the target exprt directry. Physical File Exprt - can select Cpy Files Frm Repsitry ptin. By default, this ptin is selected, s files will be cpied frm the file server t the specified exprt lcatin. When the Cpy Files Frm Repsitry ptin is cleared, the files are nt be cpied t the exprt lcatin. Instead, the exprted lad files reference the repsitry lcatin f the files. Vlume Infrmatin - cntrls the naming and size f the vlume identifier. Set the fllwing ptins in this sectin: Prefix - enter the alpha prefix fr the vlume identifier. Start # - select the first number used fr the numeric sectin f the vlume identifier. If multiple vlumes are created during the exprt, the number will increment, creating unique vlume identifiers. # f Digits - select the number f digits attached t the prefix. (Fr example, if yu selected 2, the utput wuld be VOL001, VOL002, and s n.) Max size - select the maximum size allwed fr each vlume in MBs. Subdirectry Infrmatin - cntrls the naming and size f vlume subflders. Set the fllwing ptins in this sectin: Image Prefix - enter the alpha prefix fr the subdirectry used t stre exprted images. Native Prefix - enter the alpha prefix fr the subdirectry used t stre exprted native files. Text Prefix - enter the alpha prefix fr the subdirectry used t stre exprted extracted text files. Start # - select the starting number fr the subdirectries. # f Digits - select the number f digits attached t the subdirectry prefix (Fr example, if yu selected 3, the utput wuld be IMG001, IMG002, and s n.) Max Files - select the number f files that will be stred in each subdirectry. File Path - cntrls hw the exprt path fr the files is referenced. Select ne f the fllwing ptins: Use abslute paths - paths t exprted files are represented as abslute paths. C:\ Desktp\VOL001\NATIVE001\AS msg Use relative paths - paths t exprted files are represented as relative paths..\vol001\native001\as msg Use prefix - a prefix is added t the relative path, such as a CD drive letter. D:\VOL001\NATIVE001\AS msg Lad File Characters - select the delimiters that are used in a dcument-level lad file when Data File Frmat in the Metadata sectin is set t Custm. Select the fllwing ptins as necessary: Relativity Desktp Client Guide - 63

64 Clumn - this delimiter separates clumns in the lad file. Qute - this delimiter qualifies the text in each field f the lad file. Newline - this delimiter signifies the end f any extracted text r lng text field in the lad file. Multi-Value - this delimiter separates different chices within a chice field. Nested Value - this delimiter indicates the hierarchy f chices within a chice field. Text and Native File Names - select the fllwing ptins fr naming exprted native and extracted text files: (Available Only fr Prductin Sets) Named after - select ne f the fllwing naming cnventin fr exprted files: Identifier - select this ptin t name the files after identifier fr yur wrkspace. Beginning prductin number - select this ptin t name the files after the prductin number. (This number may be the Bates number fr a prductin.) Append riginal file - select this ptin t append the riginal name f the file t the end f the exprted file name. Image - determines whether t include images in an exprt and set the frmat f the lad file. Set the fllwing ptins: Check Exprt Images - select this ptin t included images in the exprt. (Yu must set the Data File Frmat and the File Type when images are exprted.) Data File Frmat - select ne f these frmats fr image-level lad file: Opticn IPRO File Type - select ne f these file types: Single-page TIF/JPG Multi-page TIF PDF Native - select Exprt Native Files if yu want native files exprted. Metadata - use the fllwing ptins t cntrl hw the dcument-level lad file and extracted text are exprted: Data File Frmat - select a the frmat fr the dcument-level lad file that is exprted: Cmma separated (.csv) Cncrdance (.dat) - lad file is exprted with the standard Cncrdance delimiters. Custm (.txt) - lad file is exprted with the custm delimiters that yu select in the Lad File Characters sectin. See Lad File Characters. HTML (.html) - lad file is in HTML and cntains hyperlinks used t launch any exprted files. Data File Encding - select an encding fr the dcument-level lad file frm the drp-dwn bx. Click fr additinal ptins. Exprt Text Field as Files - determines hw the extracted text r OCR will be exprted. Select this ptin if yu want the files exprted as individual dcument-level text files, with ne file per dcument. When this ptin is cleared, the text is included as part f yur lad file. Text File Encding - select the encding fr the dcument-level text files. Click fr additinal ptins. Relativity Desktp Client Guide - 64

65 Text Precedence - select and assign an rder t lng text fields that Relativity will check fr text when perfrming an exprt. Yu must select ne r mre lng text fields t use this functinality. Click t display the Pick Text Precedence pp-up. T mve fields between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the precedence f the fields. If yu added mre than ne field t the Selected Lng Text Fields clumn, Relativity will add the Text Precedence clumn as the last clumn in the lad file. During an exprt, Relativity checks the tpmst field in the Selected Lng Text Fields clumn fr text, and if the field is null, it checks the next field in rder f precedence fr text. When it finds a field that cntains text, Relativity adds the cntents f that field t the Text Precedence clumn in the dcument lad file, and then cntinues checking the fields fr the next dcument. Fr example, yu want the Text Precedence clumn in the lad file t cntain the cntents f the OCR Text field when it is available fr a dcument and the cntents f the Extracted Text field when the OCR Text fr a dcument is null. In the Pick Text Precedence pp-up, yu will need t add the OCR Text as the first field in the Selected Lng Text Fields clumn fllwed by the Extracted Text field. If yu select nly ne field in the Selected Lng Text Fields clumn, Relativity adds the text t a clumn with the same name as the field, and des nt create the Text Precedence clumn. Nte: If yu want t imprve exprt perfrmance, yu d nt need t add all f the lng text fields that yu selected in the Pick Text Precedence pp-up t the Selected Clumns ptin n the Data Surce tab. When yu d nt select these fields n the Data Surce tab, but yu d add them t Selected Lng Text Fields clumn, the cntent f these fields is added t the Text Precedence clumn as described abve. When yu add the lng text fields n the Data Surce tab, Relativity will als add these clumns t the dcument level lad file. Relativity Desktp Client Guide - 65

66 The Precedence Text clumn will display the file path t the exprted files if yu selected the Exprt Text Field as Files checkbx. Exprt Multiple-Chice Fields as Nested - select this ptin t maintain the hierarchy f Relativity multiple-chice lists, when applicable. Child chices are separated by the nested value delimiter, which is a backslash by default. 4.5 Exprting a flder and its subflders Yu can exprt the cntents f a flder and its subflders as well as an entire wrkspace thrugh the RDC. Nte: T preserve yur current flder structure, yu have the ptin f running the Set Relativity flder path field script when yu're exprting a flder thrugh the RDC. T exprt thrugh the RDC, yu must be part f a grup that has the Allw Exprt admin peratin enabled in wrkspace permissins. Nte: Yu can als exprt nly the cntent f the current flder using the Flder ptin. See Exprting a flder n page 58. T exprt a flder and its subflders: 1. Open the RDC and select a wrkspace. 2. In the RDC brwser, right-click n a specific flder, pint t Exprt and click Flder and Subflders. (Yu can als highlight a flder in the RDC brwser. On the Tls menu, pint t Exprt and click Flder and Subflders.) The Data Surce tab in the Exprt Prductin windw appears. Nte: T exprt an entire wrkspace, highlight the rt flder. 3. (Optinal) T use settings in an existing exprt file, cmplete these steps: a. Click File and select Lad Exprt Settings. b. Brwse fr yur exprt settings file (.kwx) in the Open dialg. c. Select a view, and click OK. Yur view is listed n the Data Surce tab, and determines the fields listed in the Selected Clumns bx. Other settings frm the file are used t ppulate the Destinatin Files tab. (Yu can als mdify any settings n the Data Surce and Destinatin Files tab as necessary.) Nte: On the Destinatin Files tab, yu may want t select Overwrite Files if yu are re-exprting the same grup f files t the previusly used lcatin. Relativity Desktp Client Guide - 66

67 d. Cntinue with step On the Data Surce, select a view in the Views bx. Update the remaining ptins as necessary. The Data Surce tab appears when yu select the ptin t exprt prductin sets, saved searches, flders, and subflders. Yu will see similar ptins n the tab fr each f these actins, but yu may want t select different settings fr them. The fllwing screensht uses a prductin set as an example, but the settings are the same when exprting prductin sets, saved searches, flders, and subflders. On the Data Surce tab, yu can set the fllwing ptins fr the data that yu want t exprt. Depending n the type f data yu want t exprt, the drpdwn updates accrdingly. Select frm the fllwing: Views - Flders and subflders - select a view fr the data that yu want t exprt. Searches - Saved Search - select a saved search yu want t exprt. Relativity Desktp Client Guide - 67

68 Prductins - Prductin set - select a prductin set yu want t exprt Views - select a view fr the data that yu want t exprt. Selected Clumns - chse the fields that yu want t exprt by mving them t the Selected Clumns bx. The bx n the right displays all available fields, but nly thse mved t the Selected Clumns bx are exprted. Start Exprt at Recrd # select a recrd number that identifies the initial dcument fr exprt. The RDC will begin by exprting the dcument with this recrd number and cntinue by exprting dcuments with subsequent recrd numbers. (Available nly fr Saved Searches, Flders, and Subflders) Prductin Precedence - click t display the Pick Prductin Precedence dialg where yu can select a grup f prduced dcuments fr exprt instead f the riginal images. Select the images that yu want t exprt: Original Images - nly the riginal, nn-prduced images are exprted. Prduced Images - a prduced versin f the images is exprted. Include riginal images - riginal images fr the dcuments that are nt in a specified prductin are exprted. Mve the prductins that yu want t exprted t the Selected Prductins bx. T mve prductins between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the precedence f the fields. Nte: Only ne versin f each dcument will be prduced. If the dcument is in the tpmst prductin, that versin is exprted. If nt, Relativity checks fr the dcument in the secnd prductin and s n. If the dcument is nt a part f any f the selected prductins, and Include riginal images... is enabled, then the riginal dcument is prduced. Relativity Desktp Client Guide - 68

69 5. Select the Destinatin Files tab. On the Destinatin tab, yu can set ptins that cntrl hw the files in flders, searches, and prductin sets are exprted. The Exprt dialg displays this tab when yu select an Exprt ptin frm the Tls menu, r when yu right-click n a flder r wrkspace in the RDC. The Destinatin tab displays the same ptins when yu exprt files in flders, searches, r prductin sets. Nte: In the Text and Native File Name sectin, the Named after ptin is available nly fr Prductin Sets. 6. Cmplete the fields n the Destinatin Files tab. See Fields n the Destinatin Files tab n page After yu have selected yur exprt settings, select File and click Run. Nte: A warning message is displayed if yu are missing infrmatin required t run the exprt. Update the settings fr the required ptins, and run the exprt again. 8. Review the prgress f the exprt. Yu can view the prgress f an imprt r exprt thrugh the RDC. Select the fllwing tabs t display specific infrmatin: Summary - displays general infrmatin abut the number f recrds prcessing, warnings, and errrs. The fllwing screen sht displays file prgress fr an imprt jb, but yu als see a similar dialg when exprting cntent. Relativity Desktp Client Guide - 69

70 Errrs - lists any errrs encuntered during the lad. The Errrs tab displays any errrs that ccur when yu imprt r exprt cntent with the RDC. Nte: When yu run an imprt jb, the RDC imprts nly recrds with n errrs int the wrkspace. Prgress - displays a detailed view f the lad prgress. Warnings - displays infrmatin abut lading r cnnectin issues. Reprt - includes the fllwing files that yu can exprt: Exprt Errr Reprt - click this buttn t exprt a.csv file with a summary f errrs. Exprt Errr File - click this buttn t exprt a.dat file, which is a dcument-level lad file cntaining nly recrds with errrs. File Transfer Mde - displays the fllwing infrmatin: Web mde - this mde uses the web server and it is the standard. Direct mde - this mde prvides faster perfrmance, but requires a cnnectin t the netwrk hsting the data, as well as specific Windws grup permissins t be used. Cntact yur administratr fr mre infrmatin. Nte: Fr deplyments that have multi-tenancy enabled, dn't give tenants Direct Mde access in the Relativity Desktp Client, as ding s will result in mre than ne tenant having access t the same BCP path, which culd then lead t interferences with lad files during imprt. Nte: SQL Insert Mde always shws Bulk. Relativity Desktp Client Guide - 70

71 9. (Optinal) T save yur exprt settings, pint t the File menu, and click Save Exprt Settings. Chse a lcatin fr the exprt settings file (.kwx) Fields n the Destinatin Files tab The Destinatin Files tab cntains the fllwing sectins with their respective fields: Exprt Lcatin - select a target directry fr exprting flders, searches, and prductin sets. Click t brwse fr a lcatin. Select Overwrite Files t verwrite any existing files f the same name in the target exprt directry. Physical File Exprt - can select Cpy Files Frm Repsitry ptin. By default, this ptin is selected, s files will be cpied frm the file server t the specified exprt lcatin. When the Cpy Files Frm Repsitry ptin is cleared, the files are nt be cpied t the exprt lcatin. Instead, the exprted lad files reference the repsitry lcatin f the files. Vlume Infrmatin - cntrls the naming and size f the vlume identifier. Set the fllwing ptins in this sectin: Prefix - enter the alpha prefix fr the vlume identifier. Start # - select the first number used fr the numeric sectin f the vlume identifier. If multiple vlumes are created during the exprt, the number will increment, creating unique vlume identifiers. # f Digits - select the number f digits attached t the prefix. (Fr example, if yu selected 2, the utput wuld be VOL001, VOL002, and s n.) Max size - select the maximum size allwed fr each vlume in MBs. Subdirectry Infrmatin - cntrls the naming and size f vlume subflders. Set the fllwing ptins in this sectin: Image Prefix - enter the alpha prefix fr the subdirectry used t stre exprted images. Native Prefix - enter the alpha prefix fr the subdirectry used t stre exprted native files. Text Prefix - enter the alpha prefix fr the subdirectry used t stre exprted extracted text files. Start # - select the starting number fr the subdirectries. # f Digits - select the number f digits attached t the subdirectry prefix (Fr example, if yu selected 3, the utput wuld be IMG001, IMG002, and s n.) Max Files - select the number f files that will be stred in each subdirectry. File Path - cntrls hw the exprt path fr the files is referenced. Select ne f the fllwing ptins: Use abslute paths - paths t exprted files are represented as abslute paths. C:\ Desktp\VOL001\NATIVE001\AS msg Use relative paths - paths t exprted files are represented as relative paths..\vol001\native001\as msg Use prefix - a prefix is added t the relative path, such as a CD drive letter. D:\VOL001\NATIVE001\AS msg Lad File Characters - select the delimiters that are used in a dcument-level lad file when Data File Frmat in the Metadata sectin is set t Custm. Select the fllwing ptins as necessary: Clumn - this delimiter separates clumns in the lad file. Qute - this delimiter qualifies the text in each field f the lad file. Relativity Desktp Client Guide - 71

72 Newline - this delimiter signifies the end f any extracted text r lng text field in the lad file. Multi-Value - this delimiter separates different chices within a chice field. Nested Value - this delimiter indicates the hierarchy f chices within a chice field. Text and Native File Names - select the fllwing ptins fr naming exprted native and extracted text files: (Available Only fr Prductin Sets) Named after - select ne f the fllwing naming cnventin fr exprted files: Identifier - select this ptin t name the files after identifier fr yur wrkspace. Beginning prductin number - select this ptin t name the files after the prductin number. (This number may be the Bates number fr a prductin.) Append riginal file - select this ptin t append the riginal name f the file t the end f the exprted file name. Image - determines whether t include images in an exprt and set the frmat f the lad file. Set the fllwing ptins: Check Exprt Images - select this ptin t included images in the exprt. (Yu must set the Data File Frmat and the File Type when images are exprted.) Data File Frmat - select ne f these frmats fr image-level lad file: Opticn IPRO File Type - select ne f these file types: Single-page TIF/JPG Multi-page TIF PDF Native - select Exprt Native Files if yu want native files exprted. Metadata - use the fllwing ptins t cntrl hw the dcument-level lad file and extracted text are exprted: Data File Frmat - select a the frmat fr the dcument-level lad file that is exprted: Cmma separated (.csv) Cncrdance (.dat) - lad file is exprted with the standard Cncrdance delimiters. Custm (.txt) - lad file is exprted with the custm delimiters that yu select in the Lad File Characters sectin. See Lad File Characters. HTML (.html) - lad file is in HTML and cntains hyperlinks used t launch any exprted files. Data File Encding - select an encding fr the dcument-level lad file frm the drp-dwn bx. Click fr additinal ptins. Exprt Text Field as Files - determines hw the extracted text r OCR will be exprted. Select this ptin if yu want the files exprted as individual dcument-level text files, with ne file per dcument. When this ptin is cleared, the text is included as part f yur lad file. Text File Encding - select the encding fr the dcument-level text files. Click fr additinal ptins. Text Precedence - select and assign an rder t lng text fields that Relativity will check fr text when perfrming an exprt. Yu must select ne r mre lng text fields t use this functinality. Click t display the Pick Text Precedence pp-up. T mve fields between clumns, highlight them and click the Right r Left single r duble arrws. Use the Up and Dwn arrws t rder the precedence f the fields. Relativity Desktp Client Guide - 72

73 If yu added mre than ne field t the Selected Lng Text Fields clumn, Relativity will add the Text Precedence clumn as the last clumn in the lad file. During an exprt, Relativity checks the tpmst field in the Selected Lng Text Fields clumn fr text, and if the field is null, it checks the next field in rder f precedence fr text. When it finds a field that cntains text, Relativity adds the cntents f that field t the Text Precedence clumn in the dcument lad file, and then cntinues checking the fields fr the next dcument. Fr example, yu want the Text Precedence clumn in the lad file t cntain the cntents f the OCR Text field when it is available fr a dcument and the cntents f the Extracted Text field when the OCR Text fr a dcument is null. In the Pick Text Precedence pp-up, yu will need t add the OCR Text as the first field in the Selected Lng Text Fields clumn fllwed by the Extracted Text field. If yu select nly ne field in the Selected Lng Text Fields clumn, Relativity adds the text t a clumn with the same name as the field, and des nt create the Text Precedence clumn. Nte: If yu want t imprve exprt perfrmance, yu d nt need t add all f the lng text fields that yu selected in the Pick Text Precedence pp-up t the Selected Clumns ptin n the Data Surce tab. When yu d nt select these fields n the Data Surce tab, but yu d add them t Selected Lng Text Fields clumn, the cntent f these fields is added t the Text Precedence clumn as described abve. When yu add the lng text fields n the Data Surce tab, Relativity will als add these clumns t the dcument level lad file. The Precedence Text clumn will display the file path t the exprted files if yu selected the Exprt Text Field as Files checkbx. Exprt Multiple-Chice Fields as Nested - select this ptin t maintain the hierarchy f Relativity multiple-chice lists, when applicable. Child chices are separated by the nested value delimiter, which is a backslash by default. Relativity Desktp Client Guide - 73