Parts Manual SS0300. Sub-Soiler Inline Ripper. Copyright 2017 Printed 01/18/ P

Size: px

Start display at page:

Sabina Chandler
6 years ago
Views:

When you see this symbol, the subsequent instructions and warnings are serious - follow without

1 Table of Contents Part Number Index Parts Manual Sub-Soiler Inline Ripper SS0300 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 01/18/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Center Frame Assembly...6 Lights (S/N 1932YY+)...8 Lights (S/N 1931YY-)...10 Section 3: Transport...12 Gauge Wheel Assembly...12 Hub & Tire Assembly...14 Section 4: Shanks & Coulter...16 Auto Reset Shank Mount Assembly (S/N 1741YY-)...16 Rigid Shank Mount Assembly (S/N 1931YY-)...18 Rigid Shank Mount Assembly ( K) /4" Shanks & Tips Assembly /4" Shanks & Tips Assembly ( A) /4" No-Till Shank & Tip Assembly /4" No-Till Shank & Tip Assembly ( A)...28 Coulter Assembly...30 Coulter Assembly ( L)...32 Section 5: Decals...34 Decals...34 Section 6: Optional...36 Berm Conditioner (S/N 1932YY+)...36 Part Number Index...38 Copyright 2017 All rights reserved Printed 01/18/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /18/17

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 1 1 1/4" Shanks & Tips Assembly /4" Shanks & Tips Assembly ( A) /4" No-Till Shank & Tip Assembly /4" No-Till Shank & Tip Assembly ( A)...28 A Auto Reset Shank Mount Assembly (S/N 1741YY-)...16 B Berm Conditioner (S/N 1932YY+)...36 C Center Frame Assembly...6 Coulter Assembly...30 Coulter Assembly ( L)...32 D Decals...34 G Gauge Wheel Assembly...12 H Hub & Tire Assembly...14 L Lights (S/N 1931YY-)...10 Lights (S/N 1932YY+)...8 R Rigid Shank Mount Assembly ( K)...20 Rigid Shank Mount Assembly (S/N 1931YY-) /18/ P

4 Table of Contents P Part Number Index -4-01/18/17

5 Table of Contents Part Number Index 01/18/ P

6 Table of Contents Center Frame Assembly Part Number Index P /18/17

7 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly Ref. Part No. Part Description Comments Revision dwg H H C C D C C D C C C C C D C C C H H D C C C D H C D C A Image No. 3PT RIPPER 118" FRAME STAND WELDMENT PIN WIRE SNAP LOCK 1/2 X 3 1/2 PIN HITCH 1 1/4 X 4 1/2 BUSHING - CAT 4 UPPER PIN HAIR COTTER.243 WIRE PLT PIN HITCH 1 7/16 X 8 3/8 PLT 20P CAT3 HITCH PIN BUSHING MANUAL PAK 1 W/GASKET" SCREW PAN HD 1/4-20 X 3/4 MINI END WHEEL PRESS WHEEL WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT BRACKET SPEED LIMIT U-BOLT 1/2-13 X 4 1/32 X 7 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SS EU REAR LIGHT BRACKET LH SS EU REAR LIGHT BRACKET RH 4 - HOLE PLATE HHCS 1/2-13X3 1/2 GR5 BUSHING CYL 1 1/4 X 1 X 1 PIN HTCH 1X4 1/2 USLB W/KEEPER 20P LOWER HITCH BUSHING HITCH PIN SUPPORT INSERT PIN HITCH 1 1/8 X 8 1/2 SP HD PIN 1 1/2 X 7 1/2 USEABLE, PLT PIN COTTER 7/32 X 2 RIPPER CAT 2 HITCH PIN KIT Includes items /18/ P

8 Table of Contents Lights (S/N 1932YY+) Part Number Index P /18/17

9 Table of Contents Part Number Index Section 2: Frames Lights (S/N 1932YY+) Ref. Part No. Part Description Comments Revision dwg C H H C H C C C C C C C C D C C C ImageNo. HARNESS LIGHT EU SS - LED SS EU REAR LIGHT BRACKET LH SS EU REAR LIGHT BRACKET RH HHCS 5/8-11 PLT SIGN MOUNT WLMT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT FLUORESCENT PANEL SQ RED/WHITE HHCS 3/8-16X3/4 GR5 LIGHT, RED LAMP LED SING. EURO LIGHT, YELLOW LAMP LED EURO V300 REAR LED LIGHT BRACKET RED TRIANGLE REFLECTOR CABLE TIE 28 LONG CABLE TIE.19X DIA 50LB 01/18/ P

10 Table of Contents Lights (S/N 1931YY-) Part Number Index P /18/17

11 Table of Contents Part Number Index Section 2: Frames Lights (S/N 1931YY-) Ref. Part No. Part Description Comments Revision dwg H C C C C C C C D C C C C C Image No. SIGN MOUNT WLMT HHCS 5/8-11X1 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT FLUORESCENT PANEL SQ RED/WHITE HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT REAR LIGHT BRKT RED TRIANGLE REFLECTOR LH 4 1/2 ROUND LIGHT RED/AMBER HARNESS LIGHT EU SS CABLE TIE 28 LONG CABLE TIE.19X DIA 50LB 01/18/ P

12 Table of Contents Gauge Wheel Assembly Part Number Index P /18/17

13 Table of Contents Part Number Index Section 3: Transport Gauge Wheel Assembly Ref. Part No. Part Description Comments Revision dwg H C C C C C C H C C C C C S K K C C C C C C Image No. RIPPER GUAGE WHEEL MOUNT U-BOLT 5/8-11 X 6 1/32 X 5 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT SCREW JACK 2000# TP-WND A-FRAM HHCS 7/16-14X1 1/4 GR5 PLT NUT HEX FLANGE LOC 7/16-14 PLT RIPPER GUAGE WHEEL ARM PIN ROLL 1/2 X 3 LG. PLT HHCS 3/8-16X2 3/4 GR5 HHCS 7/16-14X2 3/4 GR5 NUT LOCK 3/8-16 PLT NUT HEX LOCK 7/16-14 PLT RIPPER GUAGE WHEEL HUB ASY TIRE 20.5 X 8 10 PLY 6BLT BKSN TIRE 20.5 X 8 10 PLY 6 BOLT HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT PIN BENT 1 X 4 3/4 W/HAIRPIN 20.5 X LRE WHEEL 10X6 6/6 4.62PH18INSET BK WHEEL 10X6 6/ PH. 18INSET Replaced by C Replaced by C Includes items 17 & 18 (S/N 2127YY+) Rev. 2 (S/N 2126YY-) Rev. 1 (S/N 2127YY+) Rev. 2 (S/N 2126YY-) Rev. 1 01/18/ P

14 Table of Contents Hub & Tire Assembly Part Number Index P /18/17

15 Table of Contents Part Number Index Section 3: Transport Hub & Tire Assembly Ref. Part No. Part Description Comments Revision dwg H C C C C C D C S C C C C K K Image No. RIPPER HUB SPINDLE WELDMENT BRG CONE 1.50ID 13600LA90028 BRG CUP GREASE ZERK 1/4-28 X 45-DEG BOLT WHL 9/16-18X1 1/8 GR5 HUB ASSY 6 BOLT 4 5/8 PILOT SPINDLE SLEEVE NUT HEX JAM 1 1/2-12 PLT RIPPER GUAGE WHEEL HUB ASY TIRE 20.5 X LRE WHEEL 10X6 6/6 4.62PH18INSET BK WHEEL 10X6 6/ PH.18INSET VALVE STEM METAL TR-575 TUBLES TIRE 20.5 X 8 10 PLY 6BLT BK TIRE 20.5 X 8 10 PLY 6 BOLT Includes Items 3-5 Includes Items 1-8 (S/N 2127YY+) (S/N 2126YY-) Includes Items (S/N 2127YY+) (S/N 2126YY-) Rev. 2 Rev. 1 Rev. 2 Rev. 1 01/18/ P

16 Table of Contents Part Number Index Auto Reset Shank Mount Assembly (S/N 1741YY-) P /18/17

17 Table of Contents Part Number Index Section 4: Shanks & Coulter Auto Reset Shank Mount Assembly (S/N 1741YY-) Ref. Part No. Part Description Comments Revision dwg S C C C C H A C C C H C C C C H C C H C Image No. SPRING RESET SPRING SUBASY WASHER FLAT 3/4 HARD ASTMF436 GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X4 GR5 HHCS 3/4-10X4 GR5 SHANK HOLDER 1 1/4 SHANK HOLDER 3/4 SUB ASY NUT LOCK 3/4-10 PLT NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT SPRING RESET SHANK PIVOT ARM HHCS 5/8-11X8 1/2 GR5 HHCS 3/4-10X6 GR8 BUSHING 1.25ODX1.00IDX2.00 NUT LOCK 5/8-11 PLT SHANK MOUNT SPRING RESET NUT HEX TOP LOCK 1-8 PLT HHCS 1-8X8 5/8 GR5 SPTHD PLT MOUNT CLAMP HHCS 3/4-10X3 GR8 DO NOT DISASSEMBLE SPRING PACK. For 1 1/4" Straight & Parabloic Shanks. For 3/4" No-Till Shanks. 01/18/ P

18 Table of Contents Part Number Index Rigid Shank Mount Assembly (S/N 1931YY-) P /18/17

19 Table of Contents Part Number Index Section 4: Shanks & Coulter Rigid Shank Mount Assembly (S/N 1931YY-) Ref. Part No. Part Description Comments Revision dwg H H H A C C C C C C C C C Image No. MOUNT CLAMP SHANK MOUNT, RIGID SHANK HOLDER 1 1/4 SHANK HOLDER 3/4 SUB ASY NUT LOCK 5/8-11 PLT HHCS 3/4-10X4 GR5 HHCS 3/4-10X6 GR8 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT WASHER FLAT 3/4 HARD ASTMF436 HHCS 3/4-10X3 GR8 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 For 1 1/4" Straigh & Parabolic Shanks. For 3/4" No-Till Shanks. 01/18/ P

20 Table of Contents Part Number Index Rigid Shank Mount Assembly ( K) P /18/17

21 Table of Contents Part Number Index Section 4: Shanks & Coulter Rigid Shank Mount Assembly ( K) Ref. Part No. Part Description Comments Revision dwg H H C C C C C Image No. SHANK MOUNT, RIGID MOUNT CLAMP HHCS 3/4-10X3 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X6 GR8 01/18/ P

22 Table of Contents 1 1/4" Shanks & Tips Assembly Part Number Index P /18/17

23 Table of Contents Part Number Index Section 4: Shanks & Coulter 1 1/4" Shanks & Tips Assembly Ref. Part No. Part Description Comments Revision dwg C H C C C C H C C C C C Image No. SHANK PARABOLIC 1 1/4 WEAR SHIN RETAINER 1 1/4 PARAB HHCS 1/2-13X2 1/2 GR5 NUT LOCK 1/2-13 PLT WEAR SHIN 1 1/4" PARABOLIC SHANK STRAIGHT 1 1/4 WEAR SHIN RETAINER 1 1/4 STRT WEAR SHIN 1 1/4" STRAIGHT TIP 1 1/4" X 2" WITH FIN TIP 1 1/4" X 7" WITH FIN TIP 1 1/4" X 2" RAISED CENTER TIP 1 1/4" X 7" RAISED CENTER 01/18/ P

24 Table of Contents Part Number Index 1 1/4" Shanks & Tips Assembly ( A) P /18/17

25 Table of Contents Part Number Index Section 4: Shanks & Coulter 1 1/4" Shanks & Tips Assembly ( A) Ref. Part No. Part Description Comments Revision dwg H C C C C C D C C C C H C C C C A C C C C Image No. SHANK HOLDER 1 1/4 HHCS 3/4-10X6 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT LOCK 3/8-16 PLT SHANK STRAIGHT 1 1/4 SPACER BUSHING HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 NUT LOCK 5/8-11 PLT WEAR SHIN RETAINER 1 1/4 STRT HHCS 1/2-13X2 1/2 GR5 WASHER FLAT 1/2 USS HARD PLT NUT HEX FLG LOCK 1/2-13 PLT WEAR SHIN 1 1/4" STRAIGHT SHANK AND SHIN 1 1/4 STRAIGHT TIP 1 1/4" X 2" WITH FIN TIP 1 1/4" X 7" WITH FIN TIP 1 1/4" X 2" RAISED CENTER TIP 1 1/4" X 7" RAISED CENTER Includes items /18/ P

26 Table of Contents 3/4" No-Till Shank & Tip Assembly Part Number Index P /18/17

27 Table of Contents Part Number Index Section 4: Shanks & Coulter 3/4" No-Till Shank & Tip Assembly Ref. Part No. Part Description Comments Revision dwg C D C C C CP D C Image No. SHANK NO-TILL 3/4 RETAINER CLIP 3/4" NT HHCS 1/2-13X1 3/4 GR5 NUT LOCK 1/2-13 PLT WEAR SHIN 3/4" NO TILL TIP 3/4" NO TILL LOW WING PIN SPIROL 3/4 X 1.7 LONG HVY PIN SPIROL 1/2 X 1 3/4 01/18/ P

28 Table of Contents Part Number Index 3/4" No-Till Shank & Tip Assembly ( A) P /18/17

29 Table of Contents Part Number Index Section 4: Shanks & Coulter 3/4" No-Till Shank & Tip Assembly ( A) Ref. Part No. Part Description Comments Revision dwg H C C C C C D C C C C D C C C D C A D CP Image No. SHANK HOLDER 3/4 HHCS 3/4-10X6 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SHANK NO-TILL 3/4 SPACER BUSHING HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 NUT LOCK 5/8-11 PLT RETAINER CLIP 3/4" NT HHCS 1/2-13X1 3/4 GR5 NUT LOCK 1/2-13 PLT WEAR SHIN 3/4" NO TILL PIN SPIROL 3/4 X 1.7 LONG HVY PIN SPIROL 1/2 X 1 3/4 SHANK AND SHIN 3/4" NO TILL TIP 3/4" NO TILL LOW WING HF RPBY D Includes items Rev. 2 Rev. 1 01/18/ P

30 Coulter Assembly Table of Contents Part Number Index P /18/17

31 Table of Contents Part Number Index Section 4: Shanks & Coulter Coulter Assembly Ref. Part No. Part Description Comments Revision dwg D C C C D C C D C D C C H C S C C C H C D D D C C E C C C C C C C V C C D S C C C C C C L L C Image No. COULTER CLAMP 6H X 4W U-BOLT 5/8-11 X 6 1/32 X 5 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CLAMP PLT 6 BAR WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X6 GR5 CLAMP SHANK 1 1/2 DIA SCREW SET SQ HD. 1/2-13X1 GR5 SHANK 1 1/2D X 26 FERT COULT HHCS 5/16-18X2 GR5 NUT LOCK 5/16-18 PLT COULTER STOP WELDMENT SCREW SQ HD 5/8-11 X 1 CUP PT SWIVEL COULTR CASTING ASSY, R GREASE ZERK STRAIGHT 1/4-28 NUT HEX JAM 5/8-11 PLT SCREW SET 5/8-11X1 1/2 GR8 CUP COULTER SPRING ROD WLDMT BUSHING COULTER CASTING SPRING 2.25 O.D. X.5 COIL SPRING ROD SLEEVE 1 1/8 OD COULTER SPRING WASHER NUT HEX JAM 3/4-10 PLT BUSHING 1.50ODX1.25IDX2.94 FERT COULTER SWING ARM WASHER FLAT 1 1/4 SAE PLT PIN COTTER 1/4 X 2 PLT DECAL GP PLANTING COMPONENTS SWING ARM BUSHING NUT HEX FLANGE LOCK 3/4-10 PLT NUT HEX JAM 3/4-10 PLT BRG CUP LM COULTER HUB & CUP ASSY BRG CONE 1.25ID LM OIL SEAL DOUBLE LIP HUB GREASE CAP COULTER HUB PACKAGE WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 3/4 PLT RHSNB 1/2-13X1 1/4 GR5 COULTER BLADE 20 FLUTED NUT HEX FLANGE 1/2-13 GR G PLT VAN I 20" RH COULTER ASSY SUBSOILER RH COULTER ASSY PIN SPIROL 3/8X2 1/2 PLAIN Includes items 16 & 33 Includes items Includes items & 44 Includes items /18/ P

32 Table of Contents Coulter Assembly ( L) Part Number Index P /18/17

33 Table of Contents Part Number Index Section 4: Shanks & Coulter Coulter Assembly ( L) Ref. Part No. Part Description Comments Revision dwg D C C C D C C D C D C C D S C C C C C D D C C C H C C C C C V C C D S C C C C C C C L Image No. COULTER CLAMP 6H X 4W U-BOLT 5/8-11 X 6 1/32 X 5 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CLAMP PLT 6 BAR WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X6 GR5 CLAMP SHANK 1 1/2 DIA SCREW SET SQ HD. 1/2-13X1 GR5 SHANK 1 1/2D X 26 FERT COULT HHCS 5/16-18X2 GR5 NUT LOCK 5/16-18 PLT COULTER STOP PVT CLTR CASTING MOUNT ASY RH GREASE ZERK STRAIGHT 1/4-28 SCREW SET 5/8-11X1 1/2 GR8 CUP NUT HEX JAM 5/8-11 PLT EYE BOLT 3/4-10X14 3/4 LG SP COULTER SPRING GUIDE TUBE SPRING 2.25 O.D. X.5 COIL COULTER SPRING WASHER NUT HEX JAM 3/4-10 PLT BUSHING 1X3/4X1 1/8 FLG HD BUSHING 1.50ODX1.25IDX2.94 VAN I 20" SWING ARM WLMT WASHER MACH 1 7/8X1 1/4X 14GA SNAP RING EXT 1 1/4 HEAVY WASHER MACH 1 1/4X3/4X14GA SNAP RING 3/4 EXTERNAL HEAVY BRG CUP LM COULTER HUB & CUP ASSY BRG CONE 1.25ID LM OIL SEAL DOUBLE LIP HUB GREASE CAP COULTER HUB PACKAGE WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 3/4 PLT RHSNB 1/2-13X1 1/4 GR5 COULTER BLADE 20 FLUTED NUT HEX 1/2-13 PLT PIN SPIROL 3/8X2 1/2 PLAIN SUBSOILER RH COULTER ASSY Includes items 15 & 30 Includes items Includes items 6, /18/ P

34 Decals Table of Contents Part Number Index P /18/17

35 Decals Table of Contents Part Number Index Section 5: Decals Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C Image No. DECAL PIC READ MANUAL DECAL PIC--READ MANUAL DECAL PIC EYE PROTECTION DECAL PIC--WEAR EYE PROTECTION DECAL PIC DO NOT RIDE DECAL PIC--DO NOT RIDE DECAL PIC FINGER PINCH POINT DECAL PIC--PINCH POINT DECAL SUB-SOILER 300 DECAL GP PLANTING COMPONENTS DECAL RIPPER CLAMP BOLT TORQUE DECAL RIPPER CLAMP BOLT TORQUE DECAL 30KM PER HR DECAL PIC TIRE NOT A STEP DECAL PIC--TIRE IS NOT A STEP DECAL SUB-SOILER SHANK DEPTH DECAL CAUTION TIRE 90 PSI/120 DECAL REFLECTOR AMBER 2X9 DECAL FLAG Replaced by C Replaced by C Replaced by C Replaced by C Replaced by C Replaced by C Rev. 2 Rev. 1 Rev. 2 Rev. 1 Rev. 2 Rev. 1 Rev. 2 Rev. 1 Rev. 2 Rev. 1 Rev. 2 Rev. 1 01/18/ P

36 Table of Contents Berm Conditioner (S/N 1932YY+) Part Number Index P /18/17

37 Table of Contents Part Number Index Section 6: Optional Berm Conditioner (S/N 1932YY+) Ref. Part No. Part Description Comments Revision dwg H C D C D C C H C C C V H H C C C C C C C C H C C C H C C C C D D C H C Image No. BERM CONDITIONER FRAME HHCS 3/4-10X7 GR8 WASHER 3/4X3 PLATED PLASTIC SLEEVE PIVOT BUSHING WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SPRING MOUNT HHCS 1/2-13X2 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SPRING/PLUG (SHORT) SUB ASSY ADJUSTER LINK ADJUSTER LINK HHCS 1/2-13X3 1/2 GR5 NUT LOCK 1/2-13 PLT HHCS 1/2-13X6 GR5 WASHER FLAT 1/2 USS PLT CASTING - STAINLESS T-HANDLE SPRING COMP 5/8 OD X 1 3/4 LG WASHER FLAT 3/8 SAE PLT PIN COTTER 1/8 X 1 REEL BEARING HANGER SC U-BOLT 5/8-11X3 1/32X4 1/2 SPT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT BERM CONDITIONER BASKET RHSNB 1/2-13X1 1/2 GR5 BEARING FLG 1 1/2ID 5 IN SQ NUT HEX TOP LOCK 1/2-13PLT HHCS 1-8X4 GR5 1 HARDENED SPINDLE WASHER TUBE RND - 1 1/2 OD NUT HEX 1-8 NYLON INSERT PLT SPRING MOUNT STRAIGHT LEG HHCS 1/2-13X3 1/2 GR5 Used on No-Till Shanks Used on Straight Shanks 01/18/ P

38 Table of Contents Part Number Index Part Number Index The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page H D D H D H...9, D H E D...31, D...31, D...31, D D...31, V...31, D...31, D...31, D...31, H D S...31, S H L D S D H D V A K...13, H S...13, H H D H H...7, H...7, D K...13, D D H H H...17, 19, H...19, H...17, H H...23, A A S H A...17, D...27, D...27, L...31, H H H H H H H D D D D D C...17, 31, C...9, C C...9, C C C C C...31, C...31, C...9, C...7, C...31, C...9, C...17, 19, 25, C C...17, 19, 25, C C...27, C C...31, C...23, 25, C...31, C C C C C...17, 19, 21, 25, C...17, 19, C C C C C C C...31, C...13, C...9, C...23, 27, 29, C...7, 33, C... 9, 11, 13, 31, 33, C...31, C...17, 19, 25, C...17, 19, 25, C...17, 19, 21, 29, C...31, C C...31, C C C C C C C C C C C...9, C...7, 31, 33, C C... 9, 11, 13, 31, 33, C... 13, 17, 19, 21, 25, 29, C C...31, C...17, 19, 21, 25, C C C C...31, C C...31, C C C C C C C C C C C...27, C C...13, 31, C C C C C...27, CP...27, C C...13, C...13, C...13, C C...31, C C C C C C C C...31, C C...23, C...27, C...23, C...23, C...23, C...23, C...23, C C...31, C...31, C C C C C...9, C...9, C C C C C C C C C C...31, C C C C C C C C C C C C C C...31, C C...13 dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg P /18/17

39 Table of Contents Part Number Index This Page Intentionally Left Blank 01/18/ P

40 Great Plains Mfg., Inc E. North Street Salina, Kansas USA

Parts Manual. Sub-Soiler Inline Ripper SS1300 & SS1700. Copyright 2017 Printed 06/28/ P

Parts Manual. Sub-Soiler Inline Ripper SS1300 & SS1700. Copyright 2017 Printed 06/28/ P Table of Contents Part Number Index Parts Manual SS1300 & SS1700 Sub-Soiler Inline Ripper Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious