Parts Manual 2015P & 2515P. 3-Point Precision Bean Machine. Copyright 2016 Printed 11/08/ P

Transcription

1 Table of Contents Parts Manual 3-Point Precision Bean Machine 2015P & 2515P Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2016 Printed 11/08/ P

2 Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Box Assembly...6 Box To Frame...6 Box Components...8 Lid To Box...10 Seed Level Indicator...12 Parking Stand...14 Rear Parking Stands...16 Walkboard And Ladder...18 Metering System...20 Singulating Meter...20 Seed Tray With Telescoping Tubes...24 Gauge Wheels...26 Single Gauge Wheel (20' Option)...26 Dual Gauge Wheel...28 Gauge Wheel Drive...30 Gauge Wheel Transmission...32 Row Units...34 Parallel Arms...34 Disc And Seed Tube...36 Side Gauge Wheel...38 Meter To Row Unit...40 Conservation Coulter (Option)...42 Seed Lok (Option)...44 Press Wheels " x 12" Double "V" Press Wheel /2" Press Wheel Closing Disk /2" Press Wheel Closing Disk Mount...50 Decals...52 Decal Placement (Part 1)...52 Markers P Flat Fold Marker P Flat Fold Marker P Marker Carrier...58 Marker Disc Assembly ( S)...60 Flat Fold Dual Marker Hydraulics...62 Marker Sequence Valve Hydraulics...64 Sequence Valve ( C)...66 Marker Hydraulic Cylinder 20' BM( C)...68 Marker Hydraulic Cylinder 25' BM ( C)...70 Lift Assist...72 Lift Assist...72 Caster Wheels...74 Hydraulics...76 Lift Assist Hydraulic Cylinder ( C)...78 Decal Placement (Part 2)...80 Monitor...82 Monitor ( C 15") Copyright 2016 All rights reserved Printed 11/08/16 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /08/16

3 Table of Contents Alphabetized Table of Contents Selected Models 1 1" x 12" Double "V" Press Wheel P Flat Fold Marker P Marker Carrier P Flat Fold Marker /2" Press Wheel Closing Disk /2" Press Wheel Closing Disk Mount...50 B Box Components...8 Box To Frame...6 R Rear Parking Stands...16 S Seed Level Indicator...12 Seed Lok (Option)...44 Seed Tray With Telescoping Tubes...24 Sequence Valve ( C)...66 Side Gauge Wheel...38 Single Gauge Wheel (20' Option)...26 Singulating Meter...20 W Walkboard And Ladder...18 C Caster Wheels...74 Conservation Coulter (Option)...42 D Decal Placement (Part 1)...52 Decal Placement (Part 2)...80 Disc And Seed Tube...36 Dual Gauge Wheel...28 F Flat Fold Dual Marker Hydraulics...62 G Gauge Wheel Drive...30 Gauge Wheel Transmission...32 H Hydraulics...76 L Lid To Box...10 Lift Assist...72 Lift Assist Hydraulic Cylinder ( C)...78 M Marker Disc Assembly ( S)...60 Marker Hydraulic Cylinder 20' BM( C)...68 Marker Hydraulic Cylinder 25' BM ( C)...70 Marker Sequence Valve Hydraulics...64 Meter To Row Unit...40 Monitor ( C 15")...82 P Parallel Arms...34 Parking Stand /08/ P

4 Table of Contents P /08/16

5 Table of Contents 11/08/ P

6 Box To Frame Table of Contents P /08/16

7 Box To Frame Table of Contents Box Assembly Ref. Part No. Part Description Comments Revision dwg L L L L C C C C C C H H C C C C C C D H C A C C D D C A Image No. 20' BOX & LID ASSY LH LH 24' BOX AND LID ASSY 20' BOX & LID ASSY RH RH 24' BOX AND LID ASSY HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 5/8-11X3 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT 25' 3PT BM MAIN FRAME WELDMENT 20' 3PT BM MAIN FRAME WELDMENT PIN HITCH 1 7/16 X 8 3/8 PLT PIN HAIR COTTER.243 WIRE PLT PIN HITCH 1 1/4 X 4 1/2 LIGHT HARNESS, 10' WISHBONE LIGHT HARNESS, 5' LEAD CABLE TIE.19X DIA 50LB 3-PT SIDE PLAY BUSHING CAT IV LOWER PIN SPACER PIN CLEVIS 1 3/4 X 4 3/8 USABL BM CAT IV-N 3PT HITCH PIN KIT PIN HTCH 1X4 1/2 USLB W/KEEPER BUSHING CYL 1 1/4 X 1 X 1 CAT II LOWER PIN BUSHING LONG CAT II LOWER PIN BUSHING SHORT PIN 1 1/8 X 7 1/2 USABLE BM CAT II 3PT HITCH PIN KIT Shown. Used on 25'. Shown. Used on 25'. Shown. 11/08/ P

8 Box Components Table of Contents P /08/16

9 Table of Contents Box Assembly Box Components Ref. Part No. Part Description Comments Revision dwg D D D D D C C C C C C C C C C C C C D C H H H C C H Image No. SEED BOX PARTITION BEARING CUTOUT COVER, 47 MST SEED BOX IDLER COVER RH SEED BOX IDLER COVER LH HANDLE DUAL AG LIGHTS RH DUAL AG LIGHTS LH HHCS 3/8-16X1 1/4 GR5 RHSNB 5/16-18X3/4 GR5 NUT HEX 1/2-10 ACME PLT HFS 5/16-18X3/4 GR5 HFS 3/8-16X1 GR5 NUT LOCK 5/16-18 PLT NUT HEX FLG. LOCK 1/2-13 PLT. NUT HEX FLANGE 5/16-18 PLT NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT 12' EWNT LIGHT BRACKET SCR HEX SELF TAP 1/4-20X1TYPEF 20' SEED BOX LH 20' SEED BOX RH 12' SEED BOX TALC LUBRICANT-5 GAL CONTAINER EZEE-GLIDE PLUS LUBRICANT-5GAL BOX PARTITION UPPER PAD Shown Shown, RH side LH side 25' uses two 11/08/ P

10 Lid To Box Table of Contents P /08/16

11 Lid To Box Table of Contents Box Assembly Ref. Part No. Part Description Comments Revision dwg D D H H S C C C C C C C C C D D C Image No. LATCH CASTING MACHINED LID HANDLE LID 106 SEED LID /16 SEED LID HINGE ASSEMBLY PS25120 HHCS 3/8-16X1 GR5 HHCS 5/16-18X1 1/4 NYL NUT LOCK 5/16-18 PLT NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT WASHER FLAT 5/16 SAE PLT SPRING.540 O.D.X 1 1/4 X.054W X 90 LB GAS SPRING BALL STUD 10MM X 5/16-18 X 1/2 LID HINGE PIVOT LID HINGE BASE PLATE RHSNB 3/8-16X2 GR5 20' BM. 25' BM. 11/08/ P

12 Table of Contents Seed Level Indicator P /08/16

13 Table of Contents Box Assembly Seed Level Indicator Ref. Part No. Part Description Comments Revision dwg H D D D C C C C C C C C C C C C Image No. SEED LEVEL ARM, 6 3/4R. TAB SEED FLOAT DOWN FLOAT STOP FOAM FLOAT FOAM FLOAT WASHER HFS X 1 1/8 PLTD SCR HEX HD SHT MET #8 X 1/2 NUT HEX PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 USS PLT PIN COTTER 1/8 X 3/4 SEED LEVEL BUSHING SEED LEVEL ARM MOUNT SEED LEVEL INDICATOR DECAL SEED LEVEL LH CABLE 3/64 X 11 5/8 W/ EYELETS WASHER INTERNAL STAR #10 PLT 11/08/ P

14 Parking Stand Table of Contents P /08/16

15 Parking Stand Table of Contents Box Assembly Ref. Part No. Part Description Comments Revision dwg C C H H C C C H Image No. U-BOLT 5/8-11 X 7 1/32 X 6 1/2 PIN SPIROL 3/8X2 1/2 PLAIN FRAME STAND WELD FRAME STAND MOUNT PIN HITCH 1/2 X 3 USABLE LG NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT FRAME STAND HANDLE 11/08/ P

16 Table of Contents Rear Parking Stands P /08/16

17 Table of Contents Box Assembly Rear Parking Stands Ref. Part No. Part Description Comments Revision dwg H H C C C C C Image No. PARKING STAND WLMT PARKING STAND MNT WLMT RHSNB 1/2-13X1 1/2 GR5 HHCS 3/4-10X4 1/4 SPTHD GR 8 NUT HEX 1/2-13 PLT NUT HEX FLANGE LOCK 3/4-10 PLT WASHER LOCK SPRING 1/2 PLT 11/08/ P

18 Table of Contents Walkboard And Ladder P /08/16

19 Table of Contents Box Assembly Walkboard And Ladder Ref. Part No. Part Description Comments Revision dwg C C D C C D C C D D C H H C C C C C C H D Image No. U-BOLT 1/2-13 X 2 X 3 GR 5 HHCS 3/8-16X1 1/4 GR5 3-PT STEP RETAINER WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT WALKBOARD SUPPORT BRACKET WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WALKBOARD 3PT 20' WALKBOARD 3PT 12' WASHER FLAT 3/8 USS PLT BM WALKBOARD END BRACKET RH BM WALKBOARD END BRACKET LH WASHER FLAT 1/2 USS PLT HHCS 3/8-16X1 GR5 NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 SAE PLT HHCS 3/8-16X1 1/2 GR5 NUT LOCK 3/8-16 NYLON INSERT 3PT BM LADDER WELDMENT 3PT BM LADDER MOUNT BRACKET Used on 25'. Shown. 11/08/ P

20 Singulating Meter Table of Contents P /08/16

21 Table of Contents Metering System Singulating Meter Ref. Part No. Part Description Comments Revision dwg C D C H C C C C C C C D C C D D C C D D D D D D D D D D D D D D D D D D D D D C D D C C C C C D C D C C C C C C C Image No. NUT HEX FLANGE LOC 7/16-14 PLT PSS IDLER INNER PIVOT TUBE PRESS WHEEL ARM PIVOT BUSHING PSS METER IDLER BRACKET WLDMT IDLER 1 PC 2.38X1.01X1.062 SNAP RING EXT 1 HEAVY HHCS 7/16-14X2 3/4 GR5 NUT HEX JAM NYLOCK 5/8-18 PLT WOODRUFF KEY #606 SPKT 41B19 X 5/8 BORE W/KYWAY BRG.63ID PRESS WHL ASY PSS METER HUB WASHER MACH 1.00 X.625 X 14GA WASHER MACH 1.19 X.63 X 18GA PSS METER WHEEL SUPPORT PLATE BM PSS METER SHAFT PIN ROLL 1/4 X 2 LG PL PIN ROLL 1/8 X 1LG. PLT. PSS SOYBEAN WHEEL PSS SOYBEAN WHEEL PSS SOYBEAN WHEEL PSS SOYBEAN WHEEL PSS SOYBEAN WHEEL PSS CORN RNDS CELL PSS CORN RNDS CELL PSS CORN RNDS CELL PSS CORN RNDS CELL PSS CORN RNDS CELL CORN WHL FLAT&RND -OBSOLETE- PSS CORN FLAT CELL PSS CORN FLAT CELL PSS MILO WHEEL 51 POCKETS RPBY D PSS MILO WHEEL 102 POCKETS RPBY D PSS MILO WHEEL 135 POCKETS PSS MILO WHEEL 270 POCKETS PSS MILO WHEEL 135 POCKETS PSS MILO WHEEL 270 POCKETS SPRING COMP 1.46ODX1.5X.112W RPBY C PSS METER MOUNT PLATE FORMED METER FRONT CAP METER REAR CAP SPRING COMP.39ODX.75LGX.047W METER SEED CUTOFF SLIDE METER CLEANOUT DOOR PSS METER COVER PLATE SPRING EX 1ODX3.5LX.105 OFFSET PSS METER TOP CAP FORMED LOWER SEED TUBE GROMMET METER SPACER.5X.141X1.062 HWHSTS #10-24X1/2 TYPE F SCREW PIN CLEVIS 1/4 X 2 7/64 USBL PIN CLEVIS 1/4 X 2 ADJUSTABLE PIN CLEVIS 1/4X1 31/64 USBL PIN HAIR COTTER.059W 15/16LG Shown. 3rd rev. 3rd rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 11/08/ P

22 Table of Contents Singulating Meter (continued) Ref Part No C C C C D C D Part Description PIN COTTER 5/64 X 1/2 WASHER FLAT 1/4 SAE PLT HHCS 5/16-18X1 GR5 WASHER LOCK SPRING 5/16 PLT BM METER SHAFT SPACER NUT HEX 5/16-18 PLT BM METER IDLER MOUNT PLATE Comments Revision P /08/16

23 Table of Contents Metering System Singulating Meter (continued) This Page Intentionally Left Blank 11/08/ P

24 Table of Contents Seed Tray With Telescoping Tubes P /08/16

25 Table of Contents Metering System Seed Tray With Telescoping Tubes Ref. Part No. Part Description Comments Revision dwg H H C C D C C Image No. SEED TRAY WELDM 20-P X 15 SEED TRAY WELDM 25-BM X 15 UPPER SEED TUBE GROMMET RPBY C BM OUTER SEED SLIDE TUBE BM INNER SEED SLIDE TUBE RPBY C 11/08/ P

26 Table of Contents Single Gauge Wheel (20' Option) (Applies to 2015P Precision Bean Machine only) P /08/16

27 Table of Contents Gauge Wheels Single Gauge Wheel (20' Option) (Applies to 2015P Precision Bean Machine only) Ref. Part No. Part Description Comments Revision dwg D D D H H D D C C C C C C C C C C C C C C C C C C C C C C K C Image No. HUB 6-BOLT 2 BORE 4.62 PILOT GAUGE WHEEL ARM CHAIN GUARD AXLE SPACER TUBE GAUGE WHEEL ARM TWO PIN IDLER WELDMENT RPBY A G.W. ARM EXTENDED CHAIN GUARD GREASE ZERK STRAIGHT 1/4-28 SCREW SQ HD 5/8-11X3 1/2 GR5 HHCS 1/4-20X5/8 GR5 BOLT WHEEL 1/2-20X1 90-DEG HHCS 1/2-13X1 GR5 NUT LOCK 1/2-13 PLT NUT HEX JAM 5/8-11 PLT NUT BRG LOCK, TN-10 WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT WASHER BRG LOCK, TW110 PIN SPIROL 1/2X2 1/2 PLAIN PIN COTTER 1/8 X 3/4 PIN ROLL 5/16 X 2 1/2 PLT SPKT 40B27X2B W/5/16 HOLE SEAL X 2.0 X.438 CR20125 SEAL DBL LIP 2.5 ID X OD NO T IDLER SPKT. BRG CONE 2.00ID TIM33889 VALVE STEM TR415X.625X1 1/4 LG WHEEL 8 X 15 X 6 BOLT TIRE TITAN 11L-15 X 8 PLY TITAN TIRE 11L-15 8 PLY 6 BLT BRG CUP 3.75OD TIM ' BM Includes 27,28, & /08/ P

28 Table of Contents Dual Gauge Wheel P /08/16

29 Table of Contents Gauge Wheels Dual Gauge Wheel Ref. Part No. Part Description Comments Revision dwg D D D D H H D C C C C C C C C C C C C C C C C C C C C K C C C C Image No. RPBY A HUB 6-BOLT 2 BORE 4.62 PILOT GAUGE WHEEL ARM CHAIN GUARD AXLE SPACER TUBE GAUGE WHEEL ARM TWO PIN IDLER WELDMENT G.W. ARM EXTENDED CHAIN GUARD GREASE ZERK STRAIGHT 1/4-28 SCREW SQ HD 5/8-11X3 1/2 GR5 HHCS 1/4-20X5/8 GR5 BOLT WHEEL 1/2-20X1 90-DEG HHCS 1/2-13X1 GR5 NUT LOCK 1/2-13 PLT NUT HEX JAM 5/8-11 PLT NUT BRG LOCK, TN-10 WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT WASHER BRG LOCK, TW110 PIN SPIROL 1/2X2 1/2 PLAIN PIN COTTER 1/8 X 3/4 PIN ROLL 5/16 X 2 1/2 PLT SPKT 40B27X2B W/5/16 HOLE SPKT 40B28 X2 BORE W/5/16 HOLE SEAL X 2.0 X.438 CR20125 SEAL DBL LIP 2.5 ID X OD NO T IDLER SPKT. BRG CONE 2.00ID TIM33889 TITAN TIRE 11L-15 8 PLY 6 BLT WHEEL 8 X 15 X 6 BOLT TIRE TITAN 11L-15 X 8 PLY VALVE STEM TR415X.625X1 1/4 LG BRG CUP 3.75OD TIM ' BM. 25' BM. 11/08/ P

30 Table of Contents Gauge Wheel Drive P /08/16

31 Table of Contents Gauge Wheels Gauge Wheel Drive Ref. Part No. Part Description Comments Revision dwg D D D S D D D D S C C C C C C C C C C C C C D C C C V D H H C E C Image No. PIN,3/4X3 1/4 USE W/3/16 HOLES SPACER TUBE 1 ID X 1 3/16 SPACER TUBE 1 ID X 4 11/16 3 BOLT PIVOT BEARING ASSY SPACER TUBE 1 ID X 3.94 SHAFT 7/8 HEX GW PIVOT ACREMETER HEX SHAFT ADAPTOR RPBY D GAUGE WHEEL LINK ASSEMBLY HHCS 5/8-11X2 1/2 GR5 HHCS 1/2-13X1 3/4 GR5 NUT HEX 1/2-13 PLT NUT HEX NYLOCK 5/8-11 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 5/8 USS PLT WASHER FLAT 3/4 USS PLT WASHER MACH 1.50 X 1.00 X 18GA PIN COTTER 5/32 X 1 1/4 LG PIN COTTER 3/32 X 1 LONG PIN ROLL 1/4 X 1 1/2 LG PLT PIN CLEVIS 1/4X1 31/64 USBL SPKT 40C24 X 7/8 HEX BORE CHAIN RL # PITCHES ACREMETER 20-P 11L X REV ACREMETER 25-P 11L X REV SNAP RING INT OD BEARING.880 HEX BORE 205DD 3 BOLT PIVOT CAST W/BRG SEAT ADJUSTMENT TUBE EYE BOLT ADJUSTMENT TUBE WLDMT NUT HEX JAM 1 1/4-7 LH THD PLT GAUGE WHEEL LINK UPPER CLEVIS SPKT 40C30 X 7/8 HEX BORE 20' BM. 25' BM. 11/08/ P

32 Table of Contents Gauge Wheel Transmission P /08/16

33 Table of Contents Gauge Wheels Gauge Wheel Transmission Ref. Part No. Part Description Comments Revision dwg D D D D H S D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C H S D D D D D C C C Image No. SHAFT 7/8 HEX GW UPPER REAR SHAFT 7/8 HEX GW UPPER FRNT SPKT 40C15 7/8 HEX W/ SS HOLES TUBE RND DOM. 1 OD X 7/32WX3.0 BM GW MOUNT PSS DRIVE OFFSET DOUBLE IDLER ASSY, SPKT IDLER BOLT PLATE SCREW SET 5/16-18 SKT KP X 3/8 RHSNB 5/16-18X1 1/4 GR5 RHSNB 3/8-16X1 3/4 GR5 HHCS 1/2-13X4 1/2 GR5 SPTHD NUT HEX JAM 1/2-13 PLT FLG TP LK 5/16-18ZNYCR NUT FLANGE LOCK 3/8-16 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT WASHER MACH 1.50 X 1.00 X 18GA PIN ROLL 1/4 X 1 1/2 LG PLT PIN LINCH 3/16 X 1 9/16 LONG SPKT 40C17 X 7/8 HEX BORE SPKT 40C19 X 7/8 HEX BORE SPKT 40C23 X 7/8 HEX BORE SPKT 40C24 X 7/8 HEX BORE SPKT 40C25 X 7/8 HEX BORE SPKT 40C26 X 7/8 HEX BORE SPKT 40C27 X 7/8 HEX BORE SPKT 40C28 X 7/8 HEX BORE NO T IDLER SPKT. IDLER 1 PC 2.38X1.01X1.062 BRG 7/8HEXX2.05OD SPH FLANGETTE 52 3-BOLT PLT U-BOLT 3/4-10 X 7 1/32 X 7 3/4 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SPKT 40C30 X 7/8 HEX BORE SPKT 40C15 X 7/8 HEX BORE WASHER FLAT 1/2 SAE PLT PIN COTTER 7/64 X 1 LONG OFFSET DOUBLE IDLER WELDMENT LOCK COLLAR, 7/8 HEX W/ SET SC SHAFT 7/8 HEX X LONG SHAFT 7/8 HEX X LONG CHAIN RL # PITCHES CHAIN RL # PITCHES CHAIN RL #40 66 PITCHES SPKT 40C28 X 7/8 HEX BORE SPKT 40B29 X.885 HEX BORE HHCS 5/8-11X8 GR5 30" rows. 20' BM. 25' BM. 20' BM. 25' BM. 11/08/ P

34 Parallel Arms Table of Contents P /08/16

35 Parallel Arms Table of Contents Row Units Ref. Part No. Part Description Comments Revision dwg S S D D H H H H H D D D C C C C C C C C C C C C C C C C D D C Image No. DOWN PRESSURE SPRING ASSY.312 DOWN PRESSURE SPRING ASSY.262 SPKT 41B12 7/8 HEX W/BEARING BM METER MOUNT PLATE PARALLEL ARM WELD SHANK WELD TOP PARALLEL ARM WELD GUIDE WELD BM PSS STRUT BRACE WELDMENT PARALLEL ARM PIVOT TUBE SHAFT, SPRING MOUNT MOUNT, UNIT HHCS 3/8-16X1 GR5 HHCS 5/8-11X2 GR5 HHCS 5/8-11X2 1/4 GR5 NUT FLANGE LOCK 3/8-16 PLT NUT HEX FLANGE LOCK 5/8-11 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 1 SAE WASHER FLAT 5/8 HARD ASTMF436 PIN COTTER 1/4 X 2 PLT PIN ROLL 5/32 X 5/8 PLT PIN CLEVIS 3/8 X 3 3/4 PLT SPRING.540 O.D.X 1 1/4 X.054W T-HANDLE ASSEMBLY U-BOLT 5/8-11 X 7 1/32 X 6 SPRING HOLD DOWN HD COULTER SPRING EXT 2.21ODX.262X6.0 SPRING PLUG CASTING SPRING PLUG.250 DIA. EYE-BOLT 1/2-13 PLT Heavy duty. Medium. Heavy duty. Medium. Heavy duty. Medium. 11/08/ P

36 Table of Contents Disc And Seed Tube P /08/16

37 Table of Contents Row Units Disc And Seed Tube Ref. Part No. Part Description Comments Revision dwg D S D D D C C C C C C C C C C H C V C C S C C D C C C Image No. DD BRG FLANGE DUST COVER RPBY S SHIELD, DISK SCRAPER, DISC RH SCRAPER, DISC LH RPBY H RHSNB 5/16-18X3/4 GR5 HHCS 5/8-11X1 1/2 GR5 NYL NUT HEX WHIZ 5/16-18 PLT WASHER MACH 1.19 X.63 X 18GA PIN COTTER 3/32 X 1 LONG PIN ROLL 5/16 X 7/8 PIN CLEVIS 1/4 X 2 1/2 PLT PIN ROLL 5/16 X 3/4 PLT BM PSS SEED TUBE NO SENSOR HL SHANK WELD RPBY C BEARING AA205DD HSG RIBB FLG 6BOLT PLT RIVET,BUTTON HEAD 1/4 X 1/2 BM SEED TUBE W/DJ SENSOR ASSY DJ PLANTER STYLE SEED SENSOR BM PSS SEED TUBE W/ SENSOR HL SEED FLAP CLIP-ROW UNIT SEED FLAP, RUBBER, SEED-LOK SEED FLAP, UHMW, LONG CABLE TIE.19X15 PANDU BT4S-CO Used with Seed-Lok. (Shown) Used with Seed-Lok. 11/08/ P

38 Side Gauge Wheel Table of Contents P /08/16

39 Table of Contents Row Units Side Gauge Wheel Ref. Part No. Part Description Comments Revision dwg S S D D D D D D D C C C C C C C C C C C C C C C C C C C C C D D C C D C C C D Image No. ADJUSTMENT ASSY RPBY C UP-DOWN STOP BM PSS UP DOWN STOP-CENTER SPINDLE, GA WHL MNT ADJ PIN, DEPTH CONTROL ARM, GAUGE WHEEL O-RING BUSHING ECCENTRIC BUSHING GREASE ZERK STRAIGHT 1/4-28 SNAP RING EXT 5/8.050 T SCREW SET SQ HD 1/2-13X1 1/2G5 HHCS 1/2-13X3 GR5 RHSNB 3/8-16X1 1/4 GR5 HHCS 5/8-11 X 3 GR8 HFS 1/2-13 X 1 1/2 GR8 NYL PLT NUT HEX 1/2-13 PLT NUT FLANGE LOCK 3/8-16 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 5/8 PLT WASHER MACH 1.19 X.63 X 18GA 4 X 16 GAUGE TIRE ASSY-PLASTIC O-RING 1 1/4ID X 1 1/2ODX1/ FLG TP LK 5/16-18ZNYCR 4 X 16 GAUGE WHEEL RIM 4 1/2 X 16 GAUGE TIRE BRG.63ID PRESS WHL ASY 4 X 16 GAUGE WHEEL RIM HALF HFSS 5/16-18X1 GR5 PLT HFSS 5/16-18X1 3/4 GR5 WALKBEAM WALKBEAM PIVOT PIN PIN ROLL 1/4 X 1 1/2 LG PLT PIN ROLL 5/32 X 1 1/2 PLT WALKBEAM MOUNT WASHER 3/4 X 17/32 X 18 GA PLT SPRING COMP.72 X 1.5 X.072WD PIN COTTER 3/32 X 1 LONG PLANTER HANDLE Use on center two rows with lift assist. 11/08/ P

40 Meter To Row Unit Table of Contents P /08/16

41 Table of Contents Row Units Meter To Row Unit Ref. Part No. Part Description Comments Revision dwg K C C D Image No. BM METER ASSEMBLY NUT HEX FLG. LOCK 1/2-13 PLT. HHCS 1/2-13X1 1/4 GR5 CHAIN RL # PITCHES 11/08/ P

42 Table of Contents Conservation Coulter (Option) P /08/16

43 Table of Contents Row Units Conservation Coulter (Option) Ref. Part No. Part Description Comments Revision dwg D C C C C C C C C D H H C C C C D C C C C C C Image No. HUB GREASE CAP NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 3/4 PLT WASHER SPINDLE - 7/8 BEARING CONE LM BEARING CUP LM NUT HEX JAM 3/4-10 PLT NUT HEX 3/4-10 PLT CAM CASTING MACHINED COULTER ARM HOUSING BRKT WLDMT GP-7200 CONS COU RH BRKT WLDMT GP-7200 CONS COU LH HHCS 3/4-10X3 GR5 GREASE ZERK STRAIGHT 1/4-28 OIL-SEAL DOUBLE LIP RHSNB 1/2-13X1 1/4 GR5 MACHINED SPINDLE HUB NUT HEX FLANGE 1/2-13 GR G PLT 5/8 WAVY TURBO BLADE COULTER BLADE FLUTED 17 COULTER BLADE 3/4 WAVY WASHER FLAT 1/2 USS PLT RHSNB 1/2-13X1 1/2 GR5 11/08/ P

44 Seed Lok (Option) Table of Contents P /08/16

45 Table of Contents Row Units Seed Lok (Option) Ref. Part No. Part Description Comments Revision dwg C D C H D C C D C D C C V C C C S C C D D Image No. PIN COTTER 5/32 X 1 1/4 LG LEVER, SEED LOK SPRING.540 O.D.X 1 1/4 X.054W LOCK ROD WELD SEED LOK MOUNT RHSNB 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT JD KINZE SEED LOK LOWER MOUNT SNAP RING 1/2 EXTERNAL HEAVY SEED LOK WHEEL ARM SCR HX SKT BUT CP 3/8-16X3/4 WASHER INTERNAL STAR 3/8 PLT. BRG 203 SEED-LOK WITH PIN SCR PH THD FMG #10X1/2 TP ZP RETAINER W/BONDED SEAL 4BLT 5/8 X 6 SEED LOK WHEEL 6 SEED LOK ASSEMBLY WASHER 1.5 X.51 X.187 SPRING EXT 1 X 4 X.135 WD SEED LOK PIVOT PIN LEVER STOP 11/08/ P

46 Table of Contents 1" x 12" Double "V" Press Wheel P /08/16

47 Table of Contents Press Wheels 1" x 12" Double "V" Press Wheel Ref. Part No. Part Description Comments Revision dwg C C C C C C D D C C D D C C C H D C C C C D Image No. 1 X 12 PRESS WHL ASSY-5203BRG NUT HEX LOCK 1/4-20 FLG 1 X 12 PRESS WHEEL RIM HALF TIRE RUBBER 1 X 12 BRG.63ID PRESS WHL ASY HHCS 1/4-20X1 GR5 PW HANDLE PW HANDLE TUBE PIN COTTER 5/32 X 1 PLT PIN CLEVIS 7/16 X 3 17/64 USBL 1/4 PW SPACER 5/8 DIA PARALLEL ARM PIVOT TUBE HHCS 5/8-11X4 GR5 SPRING EXT 1 7/8ODX8 3/8X.25W NUT HEX FLANGE LOCK 5/8-11 PLT CLOSEING WHEEL ARM WELD CLOSING WHEEL MOUNT HHCS 5/8-11X2 GR5 HHCS 1/2-13X1 1/2 GR5 HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT 1X12 PW ADJUSTER 11/08/ P

48 Table of Contents 6 1/2" Press Wheel Closing Disk P /08/16

49 Table of Contents Press Wheels 6 1/2" Press Wheel Closing Disk Ref. Part No. Part Description Comments Revision dwg C C A C C C D C C H C D C C C C Image No. 6 1/2 X 12 PW ASSEMBLY HFSS 5/16-18X1/2 GR5 HAM RIM 6.5 X 12 HAM.1.5 X.5 ID BALL BEARING HAM. TIRE 6.5 X 12 TRACTION NUT HEX WHIZ 5/16-18 PLT HHCS 1/2-13X10 GR5 NUT HEX FLANGE LOCK 5/8-11 PLT PARALLEL ARM PIVOT TUBE WASHER FLAT 5/8 HARD ASTMF436 HHCS 5/8-11X1 3/4 GR5 ARM WELD 6 1/2 X 12 PW NUT LOCK 1/2-13 PLT 6.5 X 12 PW SPACER TUBE SPRING EXT 1 5/16 X6 7/8 X1/4W 8 CONCAVE DISK HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT 6 1/2" PRESS WHEEL CLOSING DISK MOUNT Refer to "6 1/2" Press Wheel Closing Disk Mount" for breakdown. 11/08/ P

50 Table of Contents 6 1/2" Press Wheel Closing Disk Mount P /08/16

51 Table of Contents Press Wheels 6 1/2" Press Wheel Closing Disk Mount Ref. Part No. Part Description Comments Revision dwg D C C D D D C H C H D C C Image No. ANCHOR, SPRING HHCS 5/8-11X1 3/4 GR5 WASHER LOCK SPRING 5/8 PLT MOUNT, CLOSING DISK ARM PARALLEL ARM PIVOT TUBE PIN, STOP PIN ROLL 1/4 X 1 PLATED CLOSING DISK ARM WELD HHCS 1/2-13X3 GR5 SPTHD CLOSING DISK SPRING CAM SPRING PIVOT NUT SPRING TORSION.250 WIRE NUT LOCK 1/2-13 PLT 11/08/ P

52 Table of Contents Decal Placement (Part 1) P /08/16

53 Table of Contents Decals Decal Placement (Part 1) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C Image No. DECAL GREAT PLAINS ON LOGO SML DECAL SCRIPT PREC SEED SYSTEM DECAL 2015 P DECAL 2515 P DECAL SEED LEVEL LH DECAL LOGO&GP F/STRIPE 4 X 24 DECAL CAUTION TIRES NOT A STEP DECAL AMBER REFLECTOR DECAL WARNING HIGH PRESSUR SML DECAL DANGER CRUSH TRCTR & 3PT DECAL CAUTION OPERATIONAL MACH DECAL 15&20-P TRANSM SPKTS RH DECAL 15&20-P RANGE SPKTS RH DECAL CAUTION TIRE 36 PSI DECAL WARNING FALLING HAZARD DECAL SLOW MOVING VEHICLE DECAL RED REFLECTOR DECAL 15&20-P TRANSM SPKTS LH DECAL SDRT 20P24P SOY RPBY B DECAL WARNING 20 MPH TRANS SML DECAL 3 COLOR STRIPE 2.50 WIDE DECAL NOTICE 4-MIL DISC BLADES 11/08/ P

54 Table of Contents 2015P Flat Fold Marker (Applies to 2015P Precision Bean Machine only) P /08/16

55 Table of Contents Markers 2015P Flat Fold Marker (Applies to 2015P Precision Bean Machine only) Ref. Part No. Part Description Comments Revision dwg H H D C C H H C H H D C D C C C C D D H C D S C C C C C C C C C C D H C C D C C C C Image No. 15 & 20 BM RH MARKER MOUNT 15 & 20 BM LH MARKER MOUNT FIRST PIVOT SHAFT BUSHING CYL 1 1/4 X 1 X 1 GREASE ZERK STRAIGHT 1/4-28 RH FIRST SECTION LH FIRST SECTION NUT LOCK 3/8-16 PLT LIFT LUG CHANNEL R.H. LIFT LUG CHANNEL L.H. SECOND PIVOT SHAFT WASHER FLAT 1 SAE PIN 1 OD X 4.41 USABLE PIN COTTER 3/16 X 2 HHCS 1/2-13X4 1/2 GR5 SPTHD NUT LOCK 1/2-13 PLT HHCS 3/8-16X1 3/4 GR2 CYLINDER STOP STOP BUSHING HER BREAKAWAY WASHER FLAT 1/2 USS PLT 13' MARKER TUBE 46 1/2 LONG MARKER DISC & HUB ASSEMBLY CYL 2X20X1.12 ROD (TIE) 1 PIN NUT LOCK 5/8-11 PLT HHCS 5/8-11X5 1/2 GR5 HHCS 5/16-18X2 GR5 NUT LOCK 5/16-18 PLT HHCS 1/2-13X3 1/4 GR5 SCREW SET SQ HD 1/2-13X1 GR5 NUT HEX JAM 1/2-13 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT ADJUST MOUNT SPACER TUBE MARKER DISK ADJUST MOUNT U-BOLT 3/4-10 X 7 1/32 X 7 3/4 U-BOLT 1/2-13 X 2 X 3 GR 5 MARKER STOP PLATE WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT DECAL AMBER REFLECTOR DECAL WARNING PINCH/CRUSH MRKR Refer to "Marker Disc Assembly ( S)" for breakdown. 11/08/ P

56 Table of Contents 2515P Flat Fold Marker (Applies to 2515P Precision Bean Machine only) P /08/16

57 Table of Contents Markers 2515P Flat Fold Marker (Applies to 2515P Precision Bean Machine only) Ref. Part No. Part Description Comments Revision dwg H H H H H H D D D D D D H H S C C C C C C C C C C C C C C C C C C H D D D H H C C C C C C C C C C C C C Image No. LH FIRST SECTION RH FIRST SECTION LIFT LUG CHANNEL LH LIFT LUG CHANNEL RH 3 SECTION MARKER BREAKAWAY 24' F.F. MKR. 3RD. SECTION PIN 1 OD X 4.41 USABLE FIRST PIVOT SHAFT SECOND PIVOT SHAFT CYLINDER STOP STOP BUSHING MARKER TUBE 30 LG 25 BM RH MARKER MOUNT 25 BM LH MARKER MOUNT MARKER DISC & HUB ASSEMBLY GREASE ZERK STRAIGHT 1/4-28 SCREW SET SQ HD 1/2-13X1 GR5 HHCS 1/2-13X3 GR5 HHCS 5/16-18X2 GR5 HHCS 1/2-13X4 1/2 GR5 SPTHD HHCS 5/8-11X5 1/2 GR5 HHCS 3/8-16X2 GR2 NUT LOCK 5/16-18 PLT NUT LOCK 3/8-16 PLT NUT LOCK 1/2-13 PLT NUT HEX 1/2-13 PLT NUT LOCK 5/8-11 PLT NUT HEX JAM 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 2 CYL 2.5X20X1.12 ROD (TIE)1 PIN CHAIN BAR WELDMENT HINGE PIN CHAIN COIL 1/4 HIGH TEST 50 IN CHAIN BAR MARKER CARRIER MARKER TRANSPORT MOUNT HHCS 3/8-16X1 1/2 GR5 HHCS 3/8-16X3 1/4 GR5 HHCS 3/8-16X2 1/2 GR5 FTHD 5/16 X 1 1/4 UTILITY CLEVIS NUT HEX 3/4-10 PLT WASHER FLAT 3/8 USS PLT DECAL WARNING PINCH/CRUSH MRKR WASHER LOCK SPRING 3/4 PLT U-BOLT 1/2-13 X 2 X 3 GR 5 U-BOLT 3/4-10 X 4 1/32 X 7 1/2 U-BOLT 1/2-13 X 5 1/32 X 5 1/2 DECAL AMBER REFLECTOR BUSHING CYL 1 1/4 X 1 X 1 Refer to "Marker Disc Assembly ( S)" for breakdown. 11/08/ P

58 Table of Contents 2015P Marker Carrier (Applies to 2015P Precision Bean Machine only) P /08/16

59 Table of Contents Markers 2015P Marker Carrier (Applies to 2015P Precision Bean Machine only) Ref. Part No. Part Description Comments Revision dwg C H C C C C H Image No. U-BOLT 1/2-13 X 2 X 3 GR 5 20 BM MARKER TRANSPORT CARRIER U-BOLT 1/2-13 X 5 1/32 X 5 1/2 WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT MARKER TRANSPORT MOUNT 11/08/ P

60 Table of Contents Marker Disc Assembly ( S) P /08/16

61 Table of Contents Markers Marker Disc Assembly ( S) Ref. Part No. Part Description Comments Revision dwg C C C C BO C C D H C C C C H D C C C C Image No. TINE GW HUB TINE GAUGE WHEEL HUB SEAL BEARING CONE 1 BEARING CUP L44610 NEILSON STUD 1/2-20UNFX1 13/16 RELIABLE HUB 4 BOLT GREASE CAP #1505 NUT LUG 1/2-20X60DEG PLT(.75AF BLADE SPACER 1 SPINDLE MARKER WELDMENT WASHER FLAT 3/4 SAE PLT NUT HEX SLOTTED 3/4-16 PIN COTTER 5/32 X 1 PLT 16 4-BOLT NOTCHED MARKER DISK DEPTH BAND 10 4-BOLT 4B.C. MARKER DISC SAFETY STRAP HHCS 3/8-16X1 GR5 NUT HEX 3/8-16 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT Includes /08/ P

62 Table of Contents Flat Fold Dual Marker Hydraulics P /08/16

63 Table of Contents Markers Flat Fold Dual Marker Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C Image No. SP HH1/4R /8MNPT-W/AD HH1/4 R /8MNPT 1/2MNPT CABLE TIE.31X21.5 6DIA 120LB PLASTIC HOSE LABEL HH1/4R /8MNPT 1/2MNPT SP HH1/4R /8MNPT-W/AD EL 3/8FNPT 9/16MORB AD 3/8MNPT VALVE 3/8 NEEDLE CABLE TIE 2 DIA MIN - ORG Used on 2515P. Used on 2015P. Used on 2515P. Used on 2015P. 11/08/ P

64 Table of Contents Marker Sequence Valve Hydraulics P /08/16

65 Table of Contents Markers Marker Sequence Valve Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D C C C C C C Image No. EL 3/8FNPT 9/16MORB PLASTIC HOSE LABEL CABLE TIE 2 DIA MIN - ORG HH1/4R /8MNPT 1/2MNPT SP HH1/4R /8MNPT-W/AD SP HH1/4R /8MNPT-W/AD HH1/4 R /8MNPT 1/2MNPT HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT SEQUENCE VALVE MOUNT BRACKET HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT VALVE,SEQUENCE SHOEMAKER EL 9/16MJIC 9/16FJIC AD 1/2FNPT X 9/16FJICS Used on 2515P. Used on 2015P. Used on 2515P. Used on 2015P. 11/08/ P

66 Table of Contents Sequence Valve ( C) P /08/16

67 Table of Contents Markers Sequence Valve ( C) Ref. Part No. Part Description Comments Revision dwg C Image No. SHOEMAKER BODY MKR SEQ VALVE SHOEMAKER O-RING SHOEMAKER PLUG, HEX SOCKET SHOEMAKER NEEDLE,FLOW CONTROL SHOEMAKER.125 SPRING PIN SHOEMAKER SPRING COMPRESSION RPBY SEAL KIT RPBY RPBY SEAL KIT SHOEMAKER SCREW, FLOW CON.ADJ. SHOEMAKER HEX, JAM NUT Z PLTD. RPBY SEAL KIT RPBY SEAL KIT RPBY SEAL KIT RPBY SEAL KIT SHOEMAKER O-RING SHOEMAKER FITTING PORT ADPT. SHOEMAKER HEX,SKT O-RING PLUG SHOEMAKER O-RING SHOEMAKER SAE #6 TO #6 STRGHT RPBY SHOEMAKER SPOOL,MKR SEQ..055 SEAL KIT SHOEMAKER # /08/ P

68 Table of Contents Marker Hydraulic Cylinder 20' BM( C) (Applies to 2015P Precision Bean Machine only) P /08/16

69 Table of Contents Markers Marker Hydraulic Cylinder 20' BM( C) (Applies to 2015P Precision Bean Machine only) Ref. Part No. Part Description Comments Revision dwg M6006 2M2326 3M2310 4M2102 5M2128 6M2170 7M2328 2A0206 2A0022 2A0012 2A0006 2A C Image No. MW ROD CLEVIS MW ROD MW HEAD RPBY 4M2108 BARREL MW BASE MW TIE ROD MW PIN SHORT WIPER SEAL BACK-UP O-RING BACK-UP RPBY C RPBY C RPBY C MW PIN CLIP O-RING SEAL KIT MW 5A2104 Only available in seal kit item Only available in seal kit item Only available in seal kit item Only available in seal kit item Only available in seal kit item 11/08/ P

70 Table of Contents Marker Hydraulic Cylinder 25' BM ( C) (Applies to 2515P Precision Bean Machine only) P /08/16

71 Table of Contents Markers Marker Hydraulic Cylinder 25' BM ( C) (Applies to 2515P Precision Bean Machine only) Ref. Part No. Part Description Comments Revision dwg M6006 2M3326 3M3310 4M3102 5M3128 6M3150 7M3328 2A0206 2A0132 2A0022 2A0012 2A C Image No. MW ROD CLEVIS MW ROD MW HEAD RPBY 4M3108 MW TUBE 2-1/2 X 20 CYLINDER MW BASE MIDWAY TIE ROD MW PIN SHORT MW PIN CLIP MW WIPER MW U-CUP MW O-RING MW BACKUP RPBY C RPBY C RPBY C SEAL KIT MW 2.5 CYL 3A3102 Only found in seal kit 17 Only found in seal kit 17 Only found in seal kit 17 Only found in seal kit 17 11/08/ P

72 Lift Assist Table of Contents P /08/16

73 Lift Assist Table of Contents Lift Assist Ref. Part No. Part Description Comments Revision dwg C C C H C H C C C D C C D C H C C Image No. U-BOLT 5/8-11 X 4 1/32 X 6 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT L.A. FRAME ARM HHCS 5/8-11X1 3/4 GR5 L.A. FRAME ARM ANGLE BRACE HHCS 5/8-11X2 1/2 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT 3-PT STEP RETAINER HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 SAE PLT WALKBOARD SUPPORT BAR U-BOLT 3/8-16 X 3 1/32 X 4 L.A. WEIGHT BRACKET TUBE CASTING JD SUITCASE WEIGHT CASTING IH SUITCASE WEIGHT 11/08/ P

74 Caster Wheels Table of Contents P /08/16

75 Caster Wheels Table of Contents Lift Assist Ref. Part No. Part Description Comments Revision dwg H C C D C C C C C C C C C D C C C C K D C C D C H C C D C C D C C C C C C C H H D C H C D C C Image No. SINGLE WHEEL CASTER 10 IN. NUT LOCK 1/2-13 PLT HHCS 1/2-13X3 1/4 GR5 6 BOLT SINGLE ENDED SPINDLE SEAL 2.56X1.625X.438 CR16289 BRG CONE 1.50ID LM BRG CUP LM HUB 6 BOLT 4 5/8 PILOT W/ CUPS BEARING CUP LM BEARING CONE LM WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 5/32 X 1 3/4 LG HUB GREASE CAP HUB 6 BOLT 4 5/8 PILOT 3600 LB WHEEL 8 X 15 X 6 BOLT VALVE STEM TR415X.625X1 1/4 LG RPBY C 6 BOLT WHL&TIRE 8 PLY TUBELESS CASTER SPACER NUT LOCK 5/8-11 PLT HHCS 5/8-11X4 GR5 LIFT ASSIT CASTER SHAFT BUSHING 2 1/2 X 2 1/4 X 2 LG. CASTER CAP SPRING ARM HHCS 1/2-13X1 1/4 GR5 SPRING RESET HOE FRONT SPRING HOOK TUBE RHSNB 1/2-13X2 GR5 HHCS 1/2-13X2 1/2 GR5 FRONT SPRING RETAINER CHANNEL WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT GREASE ZERK STRAIGHT 1/4-28 PIN COTTER 3/16 X 2 WASHER FLAT 1 SAE L.A. ARM 6 1/8 EYE BOLT PIN 1 OD X 4.41 USABLE CYL 2.5X8X1.12 ROD (TIE)1 PIN CYLINDER LOCK CHANNEL-LONG BENT PIN 3/8 X 2 1/2 USE W/COT 3 BOLT PIVOT CAST MACHINED HHCS 1/2-13X1 3/4 GR5 BOLT WHEEL 1/2-20X1 90-DEG 11/08/ P

76 Hydraulics Table of Contents P /08/16

77 Hydraulics Table of Contents Lift Assist Ref. Part No. Part Description Comments Revision dwg C C C C C C C Image No. HH1/4R /16FJIC9/16MORB90 HH1/4R /2MNPT 9/16FJIC CABLE TIE.31X21.5 6DIA 120LB CABLE TIE.19X DIA 50LB BREATHER PLUG 9/16-18 MORB CYL 2.5X8X1.12 ROD (TIE)1 PIN TE 9/16MJIC 11/08/ P

78 Table of Contents Lift Assist Hydraulic Cylinder ( C) P /08/16

79 Table of Contents Lift Assist Lift Assist Hydraulic Cylinder ( C) Ref. Part No. Part Description Comments Revision dwg M3116 2M3316 1M6006 2A0012 2A0006 7M3316 3M3310 2A0094 2A0421 2A0036 2A0072 4M3102 6M3126 2A0022 2A0208 2A C Image No. MW TUBE 2-1/2 X 8 X 1-1/8 ROD MW ROD MW ROD CLEVIS RPBY C RPBY C MW TIE ROD MW HEAD RPBY C U-CUP WIPER SEAL RPBY C RPBY 4M3108 RPBY 6R0150 RPBY C RPBY C MW PIN CLIP SEAL KIT MW 2.5 CYL 3A3102 Available only in item 17. Available only in item 17. Available only in item 17. Available only in item /08/ P

80 Table of Contents Decal Placement (Part 2) P /08/16

81 Table of Contents Lift Assist Decal Placement (Part 2) Ref. Part No. Part Description Comments Revision dwg C C C C Image No. DECAL GREASE 10 HRS RH DECAL AMBER REFLECTOR DECAL GREASE 10 HRS LH DECAL WARNING GEN TRANSP LOCK 11/08/ P

82 Table of Contents Monitor ( C 15") P /08/16

83 Table of Contents Monitor Monitor ( C 15") Ref. Part No. Part Description Comments Revision dwg S S S S S S S C C C C C Image No. DJ SE SEED MANAGER CONSOLE DJ SE SEED MANAGER 4WD CAB HAR DJ 16-ROW MODULE DJ HARN EXTENSION 10 FT SMSE DJ SE SEED MAN 485 MOD EXT 30 DJ HARN 10R 24P 10 LH DJ EXT. HARNESS 30' 2 PIN PLUG DJ SE SEED MAN MOD CABLE DJ Y-CABLE CNH MAGNUM DJ Y-CABLE MAGNAVOX ADAPTER DJ Y-CABLE GENESIS DJ Y-CABLE CAT 65,75 A & B DJ Y-CABLE CAT E 11/08/ P

84 Table of Contents The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page D H...55, H H...55, H H H H D...55, 57, D D...55, D...55, D D...55, D...55, D D D H H H D D H H H S...55, H...57, H D H H H H H D D H H V H D D L H H L H H D D D L L H H D...19, D D D D D D H H H H D D D...27, D...27, D...27, H...27, H...27, H H D D D D...27, D D S D D D D D D D D H H H H D D D D D D D D H K D H H D D D D H H H S E S D D D H A D A D H V V H D D K...27, 29 1M , 71, D...43, D D D D H H A D D S A , 71, 79 2A , 71, 79 2A , 71, 79 2A A A A , 71, 79 2A , 71 2A A M M M S D D M M , H H H S H S H D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D K S S D D S D D H D H...35, H H H S D H D D D D D...35, 47, 49, D D D D D D D D D D D D D H H H D H D D D D D D D S D S S P /08/16

85 Table of Contents (continued) Part Number Page Part Number Page Part Number Page Part Number Page S S S S S M M , 79 5M M M M M M M M M C... 27, 29, 39, 43, 55, 57, C C C...7, C...63, C C C C C C C C...63, C C C C...55, C...27, C C C C C C C C C C...11, 19, 35, C...19, C...7, 41, 65, C...39, C...49, 51, C...35, C C...31, C C...47, C...27, C...9, 19, C...31, C C...9, 37, C C...55, C...27, 29, C...17, C...55, C C C C C C C C C...55, C C C...55, C...27, 29, 47, C C C C C C C C C C C C C C C C C C C C...9, 11, 55, C...55, C...19, 61, C... 27, 29, 49, 51, 55, 57, C... 7, 17, 19, 31, 39, 55, 57, 59, 65, C...7, 15, C...27, C...55, 57, C...33, 43, 55, C...43, C C...33, 55, C...37, 45, C C C C C C C C...9, C...33, C C C C C...27, C... 9, 11, 19, 33, 35, C C C...35, 47, C C C...27, C...22, 27, C C...9, 11, 19, C...19, 61, C... 9, 19, 35, 61, 65, C... 7, 17, 19, 31, 33, 39, 47, 49, 55, 57, 59, 65, C C... 19, 33, 43, 55, 57, C C...7, 15, 39, 51, C...33, 55, C C C C...35, 55, 57, C C...21, 37, C...43, C...31, C C C...35, C...27, C C C C C C...47, C C...27, C C C...31, C...55, 57, C...31, 37, C C...13, 27, C C C C...27, C C C C C...31, 33, C C C C C C C C C C C C C...21, C C C C...19, 55, 57, C C C C...33, C C...57, C C C C...11, 35, C C C C C C C C C C C C C C C C...31, C C C C C...31, C...27, C C C C C...75, C C...71, C C C...63, C C...63, C C...63, C...63, C C C C C C C C C C...27, 29, C C C C C C C C...27, C C C C C C...27, C C...27, 29, C...27, C C C C C C...27, 29, 33 11/08/ P