Parts Manual. 30' High Clearance Full Press Drill. No Image Copyright 2007 Printed 12/26/ P

Transcription

1 Table of Contents Part Number Index Parts Manual ' High Clearance Full Press Drill No Image Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2007 Printed 12/26/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Boxes and Metering...6 Box, Lid And Step...6 Feeder Cup Channel (1980 <-> 1983)...8 Feeder Cup Channel (1984 <-> 1985)...12 Fertilizer Dividers And Lid...16 Fertilizer Feed...18 Fertilizer Feed 1982 And Older...22 Drives...24 Gauge Wheel Drive (1980 <-> 1982)...24 Gauge Wheel Drive (1983 <-> 1985)...26 Frame...28 Main Frame And Slide Assembly...28 Pivot Post...30 Tongue And Pull Bar Assembly...32 Transport Axle...34 Grass Seeder...36 Grass Seeder Assembly...36 Hydraulics...40 Lift And Slide...40 Wing Hydraulics...42 Markers...44 Dual Marker Hydraulics (1983)...44 Dual Marker Hydraulics - Double Acting Cylinders (1984 <-> 1985)...46 Hydraulic Marker (1980 <-> 1982)...48 Manual Marker (1980 <-> 1982)...50 Marker Assembly (1983 <-> 1985)...52 Marker Hydraulics (1980 <-> 1982)...54 Single Marker Hydraulics (1983 <-> 1985)...56 Openers and Opener Frames...58 Double Disk Opener (1980 <-> 1982)...58 Double Disk Opener (1983 <-> 1985)...60 Hoe Shank Opener (1982)...62 Hoe Shank Opener (1983)...64 Hoe Shank Opener (1984 <-> 1985)...66 Outside Double-Disk Scraper...68 Pivot Tube Assembly - Disk Opener Frame (1980 <-> 1981)...70 Pivot Tube Assembly - Disk Opener Frame (1982)...72 Pivot Tube Assembly - Double Disk Opener Frame (1983 <-> 1985)...74 Pivot Tube Assembly - Hoe Shank Opener Frame (1982)...76 Pivot Tube Assembly - Hoe Shank Opener Frame (1983 <-> 1985)...78 Pivot Tube Assembly - Single Disk Opener Frame (1983 <-> 1985)...80 Pivot Tube Assembly - Spring Trip Hoe Opener (1980 <-> 1981)...82 Pivot Tube Assembly - Spring Trip Hoe Opener Frame (1982)...84 Pivot Tube Assembly - Spring Trip Hoe Opener Frame (1983 <-> 1985)...86 Rubber-Tired Depth Control Wheel...88 Single Disk Opener...90 Spring Trip Hoe Opener (1980 <-> 1981)...92 Spring Trip Hoe Opener (1982 <-> 1985)...94 Press Wheels " Rubber Press Wheel Gangs (1982 <-> 1985) (1 Of 3) " Rubber Press Wheel Gangs (1982 <-> 1985) (2 Of 3) " Rubber Press Wheel Gangs (1982 <-> 1985) (3 Of 3) " Rubber-Tired Press Wheel " Steel Press Wheel Gangs (1980 <-> 1981) (1 Of 3) " Steel Press Wheel Gangs (1980 <-> 1981) (2 Of 3) " Steel Press Wheel Gangs (1980 <-> 1981) (3 Of 3) " Steel Press Wheel Gangs (1982 <-> 1985) (1 Of 3) " Steel Press Wheel Gangs (1982 <-> 1985) (2 Of 3) " Steel Press Wheel Gangs (1982 <-> 1985) (3 Of 3)..114 Press Wheel Hanger Assembly Rock Guard Split Press Wheel Gangs Part Number Index Copyright 2007 All rights reserved Printed 12/26/12 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /26/12

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 2 20" Rubber Press Wheel Gangs (1982 <-> 1985) (1 Of 3) " Rubber Press Wheel Gangs (1982 <-> 1985) (2 Of 3) " Rubber Press Wheel Gangs (1982 <-> 1985) (3 Of 3) " Rubber-Tired Press Wheel " Steel Press Wheel Gangs (1980 <-> 1981) (1 Of 3) " Steel Press Wheel Gangs (1980 <-> 1981) (2 Of 3) " Steel Press Wheel Gangs (1980 <-> 1981) (3 Of 3) " Steel Press Wheel Gangs (1982 <-> 1985) (1 Of 3) " Steel Press Wheel Gangs (1982 <-> 1985) (2 Of 3) " Steel Press Wheel Gangs (1982 <-> 1985) (3 Of 3) B Box, Lid And Step...6 D Double Disk Opener (1980 <-> 1982)...58 Double Disk Opener (1983 <-> 1985)...60 Dual Marker Hydraulics (1983)...44 Dual Marker Hydraulics - Double Acting Cylinders (1984 <-> 1985)...46 F Feeder Cup Channel (1980 <-> 1983)...8 Feeder Cup Channel (1984 <-> 1985)...12 Fertilizer Dividers And Lid...16 Fertilizer Feed...18 Fertilizer Feed 1982 And Older...22 G Gauge Wheel Drive (1980 <-> 1982)...24 Gauge Wheel Drive (1983 <-> 1985)...26 Grass Seeder Assembly...36 H Hoe Shank Opener (1982)...62 Hoe Shank Opener (1983)...64 Hoe Shank Opener (1984 <-> 1985)...66 Hydraulic Marker (1980 <-> 1982)...48 Manual Marker (1980 <-> 1982)...50 Marker Assembly (1983 <-> 1985)...52 Marker Hydraulics (1980 <-> 1982)...54 O Outside Double-Disk Scraper...68 P Pivot Post...30 Pivot Tube Assembly - Disk Opener Frame (1980 <-> 1981)...70 Pivot Tube Assembly - Disk Opener Frame (1982)...72 Pivot Tube Assembly - Double Disk Opener Frame (1983 <-> 1985)...74 Pivot Tube Assembly - Hoe Shank Opener Frame (1982)...76 Pivot Tube Assembly - Hoe Shank Opener Frame (1983 <-> 1985)...78 Pivot Tube Assembly - Single Disk Opener Frame (1983 <-> 1985)...80 Pivot Tube Assembly - Spring Trip Hoe Opener (1980 <-> 1981)...82 Pivot Tube Assembly - Spring Trip Hoe Opener Frame (1982)...84 Pivot Tube Assembly - Spring Trip Hoe Opener Frame (1983 <-> 1985)...86 Press Wheel Hanger Assembly R Rock Guard Rubber-Tired Depth Control Wheel...88 S Single Disk Opener...90 Single Marker Hydraulics (1983 <-> 1985)...56 Split Press Wheel Gangs Spring Trip Hoe Opener (1980 <-> 1981)...92 Spring Trip Hoe Opener (1982 <-> 1985)...94 T Tongue And Pull Bar Assembly...32 Transport Axle...34 W Wing Hydraulics...42 L Lift And Slide...40 M Main Frame And Slide Assembly /26/ P

4 Table of Contents Part Number Index P /26/12

5 Table of Contents Part Number Index 12/26/ P

6 Box, Lid And Step Table of Contents Part Number Index P /26/12

7 Table of Contents Part Number Index Boxes and Metering Box, Lid And Step Ref. Part No. Part Description Comments Revision dwg H H H H H H H C C C C C C C C H C C C C C D D C C C D C D H H C C C C C C C H H H C C D C C Image No. 30' HC CENTER BOX ASSEMBLY 30' HC RIGHT BOX ASSEMBLY 30' HC LEFT BOX ASSEMBLY 30' HC FERT CENTER BOX Ass'y 30' HC FERT RIGHT BOX ASSEMBLY 30' HC FERT LEFT BOX ASSEMBLY LID ASSEMBLY RUBBER LID LATCH HHCS 1/4-20X1 1/2 GR5 RPBY C NUT-LOCK 1/4-20 PLT HOOD BRACKET SCREW RD HD SLT 10-24X1/2 PLT WASHER INTERNAL STAR #10 PLT NUT HEX PLT LID LATCH WELDMENT SPRING LID HING EXT HHCS 5/16-18X3/4 GR5 NUT LOCK 5/16-18 PLT WASHER FLAT 5/8 SAE PLT PIN COTTER 3/16 X 1 1/4 PLT LID HINGE STRAP SPACER LID LATCH STRAP WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT VINYL SEAL 3/8 X 1/2 (PER FT) RPBY C VINYL SEAL 3/8 X 1/2 (PER FT) VINYL SL 17 3/8 REPLBY C WALK BOARD ASSEMBLY HC WALK BOARD ASSEMBLY 6 HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 5/8-11X4 1/2 GR5 HHCS 5/8-11X2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HORIZ. TIE ANGLE WELDMENT LH HORIZ. TIE ANGLE WELDMNT RH 6 HC HORIZONTAL TIE ANGLE WDMT SIGHT GLASS GASKET GRAIN LEVEL SIGHT GLASS SIGHT GAUGE GLASS HHCS 1/2-13X1 3/4 GR5 U-BOLT 5/8-11 X 4 X 5 1/4 For Spring Trip and Hoe Opener Shown For Disk Opener 1983<=> <=>1982 Use with C 1983<=> <=> <=> <=> /26/ P

8 Table of Contents Feeder Cup Channel (1980 <-> 1983) Part Number Index P /26/12

9 Table of Contents Part Number Index Boxes and Metering Feeder Cup Channel (1980 <-> 1983) Ref. Part No. Part Description Comments Revision dwg H C C D C C D D D D D D D D D D C C D C S C C C C C D A C D H D D D D D D D D D D H H D C C H C C C C C C C C Image No. 39T SPROCKET & HUB ASSEMBLY BRG BALL 30IDX62OD 206 RING FC HOUSING FEEDER CUP BRG HOUSING GREASE ZERK STRAIGHT 1/4-28 SNAP RING EXT BASIC 1 3/16 6 FEEDER CUP CHANNEL RH 6 FEEDER CUP CHANNEL LH 7 FEEDER CUP CHANNEL RH 7 FEEDER CUP CHANNEL LH 8 FEEDER CUP CHANNEL RH 8 FEEDER CUP CHANNEL LH 10 FEEDER CUP CHANNEL RH 10 FEEDER CUP CHANNEL LH 12 FEEDER CUP CHANNEL RH 12 FEEDER CUP CHANNEL LH HHCS 1/2-13X3/4 GR5 SCREW HEX SLT10-16X1/2P.THD CT NYLON WASHER RETAINER PIN COTTER 3/16 X 1 1/4 PLT GRAIN 39T SPRKT HUB & BRG ASSY WASHER RETAINING POWDER METAL SPROCKET D2861B RPBY C DELRIN SLEEVE SEED CUP ASSEMBLY-1 1/4 RPBY C RPBY C, 121C, & 003C CLAMP HOSE 1 5/8 NO. 26 MACHINED ADJUSTMENT SPOOL RPBY D 6 ADJ SPROCKET SHAFT LH 6 ADJ SPROCKET SHAFT RH 7 ADJ SPROCKET SHAFT LH 7 ADJ SPROCKET SHAFT RH 8 ADJ SPROCKET SHAFT LH 8 ADJ SPROCKET SHAFT RH 10 ADJUSTMENT SPROCKET SHAFT 10 ADJ SPROCKET SHAFT RH 12 ADJ SPROCKET SHAFT LH 12 ADJ SPROCKET SHAFT RH ADJ HANDLE ASS'Y REAR-1 1/2 W SEED ADJ HANDLE ADJ PIVOT PIN WASHER BRG BALL 17IDX40OD 6203 SNAP RING EXT 17 MM ADJ LOCK PLATE ASS'Y - 1 1/2 W NUT WING 1/2-13 PLT NAME PLATE ADJ. GUIDE LONG NAME PLATE ADJ. GUIDE SHORT PIN ROLL 3/16X1 1/4 PLT PIN ROLL 1/4 X 3/4 PLT NYLON WASHER-SPLIT WASHER LOCK SPRING 1/2 PLT PIN ROLL 3/16 X 1 PLT Includes items 9, 10, 11, 13, 14, 15, 16, 30 and 3 See opener assembly. 12/26/ P

10 Table of Contents Part Number Index Feeder Cup Channel (1980 <-> 1983) (continued) Ref Part No C C C C C C C C C A D C C C C Part Description WASHER ADJ HANDLE BRG HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT CLAMP HOSE 1 1/2 NO. 24 SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS FEEDER CUP BRG ASS'Y ADJUSTMENT HANDLE PIVOT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X3/4 GR5 HOLE PLUG 2 DIA Comments For Single Disk and Hoe Drill only. Includes items 2 through 5. Revision P /26/12

11 Table of Contents Part Number Index Boxes and Metering Feeder Cup Channel (1980 <-> 1983) (continued) This Page Intentionally Left Blank 12/26/ P

12 Table of Contents Feeder Cup Channel (1984 <-> 1985) Part Number Index P /26/12

13 Table of Contents Part Number Index Boxes and Metering Feeder Cup Channel (1984 <-> 1985) Ref. Part No. Part Description Comments Revision dwg H C C D C C D D D D D D D D D D C C C C S C C C C C C C D H D D D D D D D D D D H H D C C H C C C C C C C C C C C Image No. 39T SPROCKET & HUB ASSEMBLY BRG BALL 30IDX62OD 206 RING FC HOUSING FEEDER CUP BRG HOUSING GREASE ZERK STRAIGHT 1/4-28 SNAP RING EXT BASIC 1 3/16 6 FEEDER CUP CHANNEL RH 6 FEEDER CUP CHANNEL LH 7 FEEDER CUP CHANNEL RH 7 FEEDER CUP CHANNEL LH 8 FEEDER CUP CHANNEL RH 8 FEEDER CUP CHANNEL LH 10 FEEDER CUP CHANNEL RH 10 FEEDER CUP CHANNEL LH 12 FEEDER CUP CHANNEL RH 12 FEEDER CUP CHANNEL LH HHCS 1/2-13X3/4 GR5 SEED CUP ASSEMBLY-1 1/4 RPBY C PIN COTTER 3/16 X 1 1/4 PLT GRAIN 39T SPRKT HUB & BRG ASSY WASHER RETAINING POWDER METAL SPROCKET D2861B RPBY C DELRIN SLEEVE CLAMP HOSE 1 5/8 NO. 26 RUBBER GRAIN TUBE D D GRAIN & FERT HOSE MACHINED ADJUSTMENT SPOOL RPBY D 6 ADJ SPROCKET SHAFT LH 6 ADJ SPROCKET SHAFT RH 7 ADJ SPROCKET SHAFT LH 7 ADJ SPROCKET SHAFT RH 8 ADJ SPROCKET SHAFT LH 8 ADJ SPROCKET SHAFT RH 10 ADJUSTMENT SPROCKET SHAFT 10 ADJ SPROCKET SHAFT RH 12 ADJ SPROCKET SHAFT LH 12 ADJ SPROCKET SHAFT RH ADJ HANDLE ASS'Y REAR-1 1/2 W SEED ADJ HANDLE ADJ PIVOT PIN WASHER BRG BALL 17IDX40OD 6203 SNAP RING EXT 17 MM ADJ LOCK PLATE ASS'Y - 1 1/2 W NUT WING 1/2-13 PLT NAME PLATE ADJ. GUIDE LONG NAME PLATE ADJ. GUIDE SHORT PIN ROLL 3/16X1 1/4 PLT PIN ROLL 1/4 X 3/4 PLT WASHER LOCK SPRING 1/2 PLT PIN ROLL.182 X 1 5/32 FDR CUP WASHER ADJ HANDLE BRG HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT 12/26/ P

14 Table of Contents Part Number Index Feeder Cup Channel (1984 <-> 1985) (continued) Ref Part No C C C C C A D C C C Part Description CLAMP HOSE 1 1/2 NO. 24 SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS FEEDER CUP BRG ASS'Y ADJUSTMENT HANDLE PIVOT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X3/4 GR5 Comments For Single Disk and Hoe Drill only. Includes items 2 through 5. Revision P /26/12

15 Table of Contents Part Number Index Boxes and Metering Feeder Cup Channel (1984 <-> 1985) (continued) This Page Intentionally Left Blank 12/26/ P

16 Table of Contents Fertilizer Dividers And Lid Part Number Index P /26/12

17 Table of Contents Part Number Index Boxes and Metering Fertilizer Dividers And Lid Ref. Part No. Part Description Comments Revision dwg D C C C C C H H H H H H H H C C D C D C C H C C H C C C C C C C C Image No. OUTLET COVER HHCS 1/4-20X3/4 GR5 RPBY C WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT BOX DIVIDER ASSEMBLY RH CENTER BOX DIVIDER ASSEMBLY BOX DIVIDER ASSY LH LH BOX DIVIDER ASSY POST END RH BOX DIVIDER ASSY POST END LH POST COVER RH POST COVER SPILL SHIELD ASSEMBLY 1/4-20 X 1 U TYPE FASTENER RPBY C HOLD DOWN PLATE HHCS 1/4-20X1 GR5 SHIELD SUPPORT PIN COTTER 5/32 X 1 PLT WASHER FLAT 3/8 SAE PLT LID LATCH PIN COTTER 3/16 X 1 1/4 PLT WASHER FLAT 5/8 SAE PLT LID ASSEMBLY FERT HHCS 1/4-20X1 1/2 GR5 RPBY C NUT-LOCK 1/4-20 PLT RUBBER LID LATCH HOOD BRACKET SCREW RD HD SLT 10-24X1/2 PLT WASHER INTERNAL STAR #10 PLT NUT HEX PLT Shown 12/26/ P

18 Fertilizer Feed Table of Contents Part Number Index 8207A P /26/12

19 Fertilizer Feed Table of Contents Part Number Index Boxes and Metering Ref. Part No. Part Description Comments Revision dwg E E E E E E E E E E E E E R D D C C C C C C E E C C H D D C C C C C C C H H C C E S D D C C C C C C C C E D D C Image No. 6 FERT TRAY 7 FERT TRAY 8 FERT TRAY 10 FERT TRAY 12 FERT TRAY CLEAN OUT HOLE CVR ASSY6,10,12 CLEAN OUT HOLE COVER ASSEMBLY CLEAN OUT HOLE COVER ASSEMBLY 6 SLIDE ASSEMBLY 7 SLIDE ASSEMBLY 8 SLIDE ASSEMBLY 10 SLIDE ASSEMBLY 12 SLIDE ASSEMBLY SEAL 5/16 X 3/4 DOR-TITE TRAY SEAL REPL BY R 116 1/4 RPBY R SCREW PAN HD X 3/8 SS WASHER LOCK INTERNAL #10 SS NUT HEX SS RHSNB 1/4-20X3/4 SS WASHER LOCK 1/4 SS NUT HEX SS 1/4-20 FERT DROP TUBE ASSEMBLY BOX SLIDE STOP ASSEMBLY UPPER FERT HOSE CLAMP FERTILIZER DROP TUBE LATCH STRIKE FERTILIZER LATCH WELDMENT FERTILIZER LATCH LOCK COVER HANDLE CHAIN PIN COTTER 5/32 X 1 PLT HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT HHCS 1/4-20X3/4 SS WASHER FLAT 1/4 SAE SS.00 HEX SS 1/4-20 NYLOCK ADJUSTMENT ARM ASSEMBLY ADJ LOCK PLATE ASS'Y - 1 1/2 W NUT WING 1/2-13 PLT NUT LOCK 1/2-13 PLT AGITATOR TUBE MACHINED AGITATOR FIN ASSEMBLY COVER PLATE TRAY TRAY BEARING SPACER FELT SEAL BEARING 1-3-BOLT FLANGED HHCS 5/16-18X1 3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT SPROCKET 50B26 X 1 BORE PIN ROLL 5/16 X 2 1/4 PLT SPROCKET 50B15 X 1 BORE SEED/FERT ADAPTOR HUB KEY 1/4 X 1 CHAIN RL 20-50A 21 PITCHES RPBY D SEE OPENER ASSEMBLY 12/26/ P

20 Table of Contents Fertilizer Feed (continued) Part Number Index Ref Part No K D C C C C C C C D C C C C H D C C C C C Part Description AGITATOR ASSEMBLY FERT CHAIN GUARD LT HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX CPLR 5/16-18X3 1/2 WASHER FLAT 5/16 USS PLT WASHER FLAT 1/4 SAE PLT HHCS 5/8-11X1 1/2 GR5 WASHER FLAT 5/8 USS PLT FERT CHAIN GUARD CLAMP 1/4-20 X 1 U TYPE FASTENER RPBY C WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT FERT IDLER ARM ASSEMBLY IDLER DISC NAME PLATE ADJ. GUIDE SHORT SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS Comments Was C Revision P /26/12

21 Table of Contents Part Number Index Boxes and Metering Fertilizer Feed (continued) This Page Intentionally Left Blank 12/26/ P

22 Table of Contents Fertilizer Feed 1982 And Older Part Number Index 8207B P /26/12

23 Table of Contents Part Number Index Boxes and Metering Fertilizer Feed 1982 And Older Ref. Part No. Part Description Comments Revision dwg C C H K K K D H C C H H H H Image No. NUT LOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT CONNECTING ROD ASSEMBLY 6,7&8 FDR CUP LATCH BAR ASS'Y 10&12 FDR CUP LATCH BAR-SHORT 10&12 FDR CUP LATCH BAR-LONG PIVOT ANGLE SPACER LATCH PIVOT ASSEMBLY HHCS 5/16-18X1 SS NUT HEX JAM 5/16-18 SS LATCH LEVER ASSEMBLY LH LATCH LEVER ASSEMBLY RH LATCH LEVER ASSEMBLY RH LATCH LEVER ASSEMBLY LH 12/26/ P

24 Table of Contents Gauge Wheel Drive (1980 <-> 1982) Part Number Index P /26/12

25 Table of Contents Part Number Index Drives Gauge Wheel Drive (1980 <-> 1982) Ref. Part No. Part Description Comments Revision dwg H H H C C C C C C C C C C C C C C D D C C S H C C D C D C D D C D C C C D C C C C D C D C C C C C H S S K K C C C Image No. SINGLE GW AXLE SHAFT WELDMNT SINGLE GW AXLE HUB WELDMENT RPBY H & H BRG FLG 50ID 4BLT LOCK BEARING GAUGE WHEEL LC COLLAR HHCS 1/2-13X1 3/4 GR5 RPBY C WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT ACRE METER 30' SPKT 15 TEETH X 1 1/2 BORE PIN ROLL 5/16 X 2 1/4 PLT TIRE 9.5 L X 15 8 PLY TUBE 9.5 L X 15 8 PLY WHEEL 6 X 15 X 5 BOLT NUT LUG 1/2-20X90DEG PLT 13/16 SPEEDCHANGE ARM SPEEDCHANGE TUBE HHCS 1/2-13X4 GR5 BRG INS 00ID LOCK SPEED CHANGE HUB RPBY S HHCS 1/2-13X1 1/2 GR5 RPBY C CHAIN RL 20-50A 35 PITCHES RPBY D CHAIN RL 20-50A 43 PITCHES RPBY D JACK SHAFT DUAL GAUGE WHEEL JACK SHAFT BRG FLG 00ID 2BOLT JACK SHAFT - KEY SPKT 50B39 X 1 BORE SPKT 50B19 X 1 BORE SPKT 50B15 X 1 BORE IDLER DISC HHCS 5/8-11X1 3/4 GR5 WASHER FLAT 5/8 SAE PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CHAIN RL 20-50A 43 PITCHES RPBY D CHAIN GUARD NUT HEX COUPLER 5/16-18X1 3/4 WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X3/4 GR5 NUT HEX JAM 5/8-11 PLT DUAL GAUGE WHEEL AXLE ASSEMBLY SPEED CHANGE HUB RPBY S TIRE 9.5LX15 ON 6IN 5BOLT RIM 9.5L X 15 8 PLY TIRE ASSEMBLY HHCS 5/16-18X1 1/2 GR5 RPBY C NUT HEX 5/16-18 PLT 12/26/ P

26 Table of Contents Gauge Wheel Drive (1983 <-> 1985) Part Number Index P /26/12

27 Table of Contents Part Number Index Drives Gauge Wheel Drive (1983 <-> 1985) Ref. Part No. Part Description Comments Revision dwg H H H H C C C C C C C C C C C C C C D C E C D C D C C D C D D C D C C C C C D C C C C D C D C C C C S C K K K Image No. SINGLE GW AXLE SHAFT WELDMNT SINGLE GW AXLE HUB WELDMENT DUAL GW AXLE SHAFT WELDMENT DUAL GW AXLE HUB WELDMENT WHEEL 6 X 15 X 5 BOLT VALVE STEM TR415X.625X1 1/4 LG RPBY C HHCS 1/2-13X1 3/4 GR5 NUT LOCK 1/2-13 PLT NUT LUG 1/2-20X90DEG PLT 13/16 BEARING GAUGE WHEEL LC COLLAR BRG FLG 50ID 4BLT LOCK HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SPKT 15 TEETH X 1 1/2 BORE PIN ROLL 5/16 X 2 1/4 PLT SPEEDCHANGE ARM HHCS 1/2-13X1 1/2 GR5 SPEED CHANGE WELDMENT HHCS 1/2-13X4 GR5 SPEEDCHANGE TUBE BRG.50ID SPEED CHANGE CHAIN RL 20-50A 35 PITCHES RPBY D SPKT 50B39 X 1 BORE CHAIN RL 20-50A 43 PITCHES RPBY D JACK SHAFT DUAL GAUGE WHEEL JACK SHAFT BRG FLG 00ID 2BOLT JACK SHAFT - KEY HHCS 5/16-18X1 1/2 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT SPKT 50B15 X 1 BORE HHCS 5/8-11X1 3/4 GR5 IDLER DISC NUT HEX JAM 5/8-11 PLT WASHER FLAT 5/8 SAE PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CHAIN RL 20-50A 43 PITCHES RPBY D CHAIN GUARD HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT NUT HEX COUPLER 5/16-18X1 3/4 SPEED CHANGE HUB ACRE METER 30' TIRE 9.5LX15 ON 6IN 5BOLT RIM 9.5L X 15 8 PLY TIRE ASSEMBLY SPEED CHANGE ASSEMBLY 1983 Rev. 2 Rev. 1 Rev. 2 Rev. 1 Rev. 2 Rev. 1 Includes items 21, 23 and 24. Includes items 5, 6 and Rev. 2 Includes items 5, 6 and Rev. 1 Includes items 15, 16, 19, 22 and 4 12/26/ P

28 Table of Contents Main Frame And Slide Assembly Part Number Index P /26/12

29 Table of Contents Part Number Index Frame Main Frame And Slide Assembly Ref. Part No. Part Description Comments Revision dwg H H C C C C C C C C C C C H D C C C C C C C H C H C C H D H C Image No. U JOINT SPINDLE RH U JOINT SPINDLE LH SEAL X 0 X.438 CR20125 BEARING CONE BRG CUP BEARING CUP BEARING CONE WASHER SPINDLE - 7/8 WASHER FLAT 7/8 SAE PLT NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 1/4 PLT HUB CAP GREASE ZERK STRAIGHT 1/4-28 HC TRIANGLE FRAME SLIDE FRAME SPREADER TUBE HHCS 1/2-13X6 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1-8X8 GR5 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT PIN HITCH 1 X 6 W/HAIRPIN TONGUE PIN ASSEMBLY PIN LINCH 5/16 X 1 3/4 LOCK HANDLE WELDMENT PIN ROLL 1/4 X 3/4 PLT SPRING LEVER SPRING LEVER WELDMENT PIN LOCK PIVOT PIN PIN LOCK WELDMENT PIN SPIROL 1/2X2 1/2 PLAIN Shown /26/ P

30 Pivot Post Table of Contents Part Number Index P /26/12

31 Pivot Post Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H H H D C C C C C C C C D C C C C C C C Image No. HC POST WELDED ASSEMBLY R HC POST WELDED ASSEMBLY L PIVOT POST SWIVEL ASSEMBLY CROSS BAR WASHER FLAT 1 USS PLT WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HHCS 1 1/4-7X7 GR5 WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT NUT HEX 1 1/4-7 PLN RH SPACER TUBE HHCS 3/4-10X9 1/2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 1/2-13X9 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 3/4-10X4 GR5 FTHD Shown 12/26/ P

32 Table of Contents Tongue And Pull Bar Assembly Part Number Index P /26/12

33 Table of Contents Part Number Index Frame Tongue And Pull Bar Assembly Ref. Part No. Part Description Comments Revision dwg H H H C C H H C C C C C C H D C K C C C C Image No. TONGUE ASSEMBLY PULL BAR ASSEMBLY ADJ. CLEVIS ASSEMBLY NUT HEX JAM 1 1/4-7 PLT PIN CLEVIS 1 X 2 3/4 USABLE LG PULL BAR SLIDE ASSEMBLY TONGUE PIN ASSEMBLY PIN LINCH 5/16 X 1 3/4 HHCS 1/2-13X5 1/2 GR5 NUT LOCK 1/2-13 PLT HHCS 1-8X6 1/2 GR5 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HITCH ASSEMBLY LOWER BAR - HITCH HHCS 1-8X4 GR5 HITCH ASSEMBLY SCREW JACK 30' DRILLS JACK REPAIR PINS PIN HITCH 1 X 6 W/HAIRPIN PIN CLEVIS 1 X 2 3/4 USABLE LG Includes items 12 through /26/ P

34 Transport Axle Table of Contents Part Number Index P /26/12

35 Transport Axle Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H K C C C C D C C C C C C C D C C C C D C C C C C C C D C C D C C C C C S S K K H C C C Image No. TRANSPORT AXLE MAIN AXLE BEARING ASSEMBLY GREASE ZERK STRAIGHT 1/4-28 HHCS 3/8-16X3 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT AXLE BEARING MOUNT CHANNEL HHCS 3/4-10X6 GR5 WASHER FLAT 3/4 USS PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 5/8-11X4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT SPINDLE BOTTOM CLAMP HHCS 1/2-13X1 1/2 GR5 RPBY C WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DOUBLE ENDED TRANSPORT SPINDLE RPBY D WASHER FLAT 7/8 SAE PLT PIN COTTER 3/16 X 1 1/4 PLT NUT HEX SLOTTED 7/8-14 PLT SEAL 56X625X.438 CR16289 BRG CONE 50ID LM BRG CUP LM RPBY C BEARING CUP LM BEARING CONE LM HUB GREASE CAP BOLT WHEEL 1/2-20X1 90-DEG WHEEL 8 X 15 X 6 BOLT TIRE 9.5L X PLY-TUBELESS VALVE STEM TR415X.625X1 1/4 LG HUB 6 BOLT 4 5/8 PILOT 3600 LB RPBY C & (6) C SPINDLE TRANSPORT PKG TIRE/WHEEL ASSY 9.5LX15 12 PLY RPBY K CENTER BOX PIVOT STOP WELDMENT HHCS 5/8-11X3 1/2 GR5 NUT LOCK 5/8-11 PLT TUBE 9.5L X 15 Includes items 3 through 6. Includes items 22, 23, 24, 25, 27, 28, 29, C, C and C. Includes items 23 through 30. Includes items 19 through 2 Includes items 31, 32 and 33. Includes items 31, 32 and 33. Not shown. 12/26/ P

36 Table of Contents Grass Seeder Assembly Part Number Index P /26/12

37 Table of Contents Part Number Index Grass Seeder Grass Seeder Assembly Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H H H H H H H D D H H C D C C C C C D C C C C C C D S D D D D D D D C C C C C D C C C C C D C H H Image No GRASS SEED BOX RH GRASS SEED BOX LH 8-96 GRASS SEED BOX RH 8-96 GRASS SEED BOX LH 7-96 GRASS SEED BOX RH 7-96 GRASS SEED BOX LH GRASS SEED BOX RH GRASS SEED BOX LH 6-96 GRASS SEED BOX LH 6-96 GRASS SEED BOX RH 7 1/2-96 GRASS SEED BOX RH 7 1/2-96 GRASS SEED BOX LH 59 SEED BOX LID WELDMENT 96 INCH SEED BOX LID WELDMENT 81 INCH SEED BOX LID WELDMENT DRIVE CHAIN MOUNTING PLATE RH DRIVE CHAIN MOUNTING PLATE LH DRIVE CHANGE BRACKET LH DRIVE CHANGE BRACKET RH HHCS 1/4-20X5/8 GR5 LID LOCK BAR NUT LOCK 1/4-20 PLT SPRING EXT LID LATCH U-BOLT 1/4-20 X 15/16 X 1 PLT NUT HEX 1/4-20 PLT HHCS 1/2-13X4 GR5 DRIVE BRACKET SPACER TUBE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 5/16-18X3/4 GR5 WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT SEED BOX SPROCKET CAP DRIVE SPROCKET ASSEMBLY SEED CUP SHAFT SEED CUP SHAFT 8-96 SEED CUP SHAFT 7 1/2-96 SEED CUP SHAFT 7-96 SEED CUP SHAFT 6-96 SEED CUP SHAFT SEED CUP SHAFT W/END DRV PIN ROLL 1/8 X 3/4 PLT GRASS SEEDER SPROCKET GRASS SEEDER CUP ASSEMBLY GRASS SEEDER SLEEVE CLAMP HOSE GRASS SEED GRASS SEED HOSE SCREW RD HD SLT 10-24X1/2 PLT WASHER FLAT #10 SAE PLT WASHER INTERNAL STAR #10 PLT NUT HEX PLT HHCS 5/16-18X1 GR5 SEED BOX MOUNTING BAR FLANGETTE 47 MST GRASS SEED DRIVE CHANGE SHAFT CHAIN IDLER BRACKET 12/26/ P

38 Table of Contents Grass Seeder Assembly (continued) Part Number Index Ref Part No C C C C C D C C C C D C H C D S C D S C D D D D C C C D C D C C C C C C C D D D D D D D D D D D D D H H D D D C C C Part Description SPRING EXT LID HING NUT HEX JAM 1/2-13 PLT HHCS 1/2-13X1 1/4 GR5 WASHER 1 3/4 X.565 X.190TH.PLT NUT LOCK 1/2-13 PLT CHAIN RL #40 36 PITCHES REP BY D SPKT 40B10 X 3/4 BORE HHCS 5/16-18X1 1/2 GR5 BEARING JACK SHAFT JACKSHAFT BEARING BRACKET RH U-BOLT 1/2-13 X 3 17/32 X4 1/2 TYPE 1 & 2 DRIVE CHG. SPROCKET CHAIN RL #40 X 63 PITCHES CHAIN RL #40 76 PITCHES OBSOLETE REPLACED BY D REP BY S CHAIN RL #40 76 PITCHES OBSOLETE REPLACED BY D REP BY S GRASS SEEDER JACKSHAFT 3-POINT GRASS SEEDER JACKSHAFT 20' GRASS SEEDER JACKSHAFT DUAL GW GRASS SEEDER JACKSHAFT HHCS 3/8-16X3 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT SEED HOSE MOUNTING CLAMP WASHER GRASS SEEDER CUP SHAFT UPPER IDLER ARM BEARING 3/4BORE 47MM SPHERE OD WASHER LOCK SPRING 1/4 PLT HFSS 1/4-20X1/2 GR5 LATCH FERT TRAY DOOR SCREW RD HD 8-32 X 1/2 LG PLT WASHER LOCK #8 NUT HEX 8-32 ADJUSTMENT SPOOL SPACER 1 13/16 ADJ SPOOL SPACER 15/16 ADJUSTMENT SPOOL SPACER 1/2 ADJUSTMENT SPOOL SPACER 1 1/16 ADJ SPOOL SPACER 11/16 ADJUSTMENT SPOOL SPACER 12 ADJUSTMENT SPOOL SPACER 10 ADJ. SPOOL SPACER 8 ADJUSTMENT SPOOL SPACER 7 1/2 ADJUSTMENT SPOOL SPACER 7 ADJUSTMENT SPOOL SPACER 1 1/8 ADJUSTMENT SPOOL SPACER SEED ADJUSTMENT SUPPORT ADJUSTMENT HANDLE PIVOT ADJUSTMENT HANDLE WELDMENT LOCK TAB SEED ADJUSTMENT SPOOL GAUGE MOUNTING BRACKET NAME PLATE ADJ. GUIDE SHORT RHSNB 5/16-18X3/4 GR5 NUT WING 5/16-18 Comments Revision P /26/12

39 Table of Contents Part Number Index Grass Seeder Grass Seeder Assembly (continued) Ref Part No C C C C C D C D Part Description PIN COTTER 5/32 X 1 PLT SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS KEY 1/4 X 1 KEY 3/16 X 7/8 REPLACED BY C Comments Revision 12/26/ P

40 Lift And Slide Table of Contents Part Number Index P /26/12

41 Lift And Slide Table of Contents Part Number Index Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C K C C C C C D C H D C D C C D D C C Image No. CYL 4X16X2 ROD (TIE) 1 PIN CYL 5X14X2 ROD (TIE ROD) TE 1/2FNPT 1/2MNPT 1/2FNPT AD 3/8MNPT 1/2MNPT RPBY C HH1/2R /2MNPT 1/2MNPTS CHECK VALVE KIT RPBY K OR K TE 1/2MNPT 1/2FNPT 1/2FNPT EL 1/2MNPT 1/2FNPT HH1/2R /2MNPT 1/2MNPTS HH1/2R /2MNPT MAIN CYLINDER PIN ROD END PIN ROLL 3/16 X 2 PLT STD. CYLINDER PIN W/HAIRPIN COTTER CYLINDER BLOCK ASSEMBLY CYLINDER BLOCK PIN PIN HAIR COTTER.092 WIRE SLIDE CYL PIN HC PIN ROLL 3/16X 1 1/2 PLT WASHER FLAT 1 1/4 USS PLT SPACER BUSHING - PRINCE SPACER BUSHING W/HOLE-PRINCE CYL SEAL KIT 4 X 16 MW 5A6106 CYL SEAL KIT 5 - PRINCE CYL Furnished with cylinder. For item For item 12/26/ P

42 Wing Hydraulics Table of Contents Part Number Index P /26/12

43 Table of Contents Part Number Index Hydraulics Wing Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C Image No. CYL 3X7X25 ROD (TIE ROD) RPBY C CYL 3X7X25 ROD (TIE ROD) RPBY C ORAD 1/32 1/2FNPT 1/2MNPT EL 1/2MNPT 1/2FNPTS HH3/8R /2 MNPT HYD FITTING 1/2 F TEE PIPE HH1/2R /2MNPT STD. CYLINDER PIN W/HAIRPIN COTTER CYL SEAL KIT MW (5A4104) 3 X 7 Furnished with cylinder. For items 1 and 12/26/ P

44 Table of Contents Dual Marker Hydraulics (1983) Part Number Index P /26/12

45 Table of Contents Part Number Index Markers Dual Marker Hydraulics (1983) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C Image No. DOUBLE SELECTOR VALVE AD 3/4MORB 1/2MNPT PL 1/2MNPT SQ HD VALVE SEQUENCE HH3/8R /2MNPT 1/2MNPTS HHCS 3/8-16X3 1/2 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HH1/4R /16 FJIC 3/8MNPT EL 1/2FNPT HH1/2R /2MNPT CYL 2X8X12 ROD PL 3/8MNPT BREATHER EL 3/8MNPT 3/8FNPTS ONE-WAY RESTRICTOR VALVE AD 3/8MNPT HYD FITTING 1/2 F TEE PIPE AD 9/16MJIC 3/4MORB 12/26/ P

46 Table of Contents Part Number Index Dual Marker Hydraulics - Double Acting Cylinders (1984 <-> 1985) P /26/12

47 Table of Contents Part Number Index Markers Dual Marker Hydraulics - Double Acting Cylinders (1984 <-> 1985) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C Image No. DOUBLE SELECTOR VALVE AD 3/4MORB 1/2MNPT AD 3/8MNPT 1/2MNPT VALVE SEQUENCE HH3/8R /2MNPT 1/2MNPTS HHCS 3/8-16X3 1/2 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HH1/4R /16 FJIC 3/8MNPT EL 1/2FNPT HH1/2R /2MNPT CYL 2X8X12 ROD EL 45 3/8MNPT 3/8FNPT VALVE 3/8 NEEDLE TE 3/8MNPT 9/16MJIC 9/16MJIC EL 3/8MNPT 3/8FNPT AD 9/16MJIC 3/4MORB 12/26/ P

48 Table of Contents Hydraulic Marker (1980 <-> 1982) Part Number Index P /26/12

49 Table of Contents Part Number Index Markers Hydraulic Marker (1980 <-> 1982) Ref. Part No. Part Description Comments Revision dwg H H C C C C C C C H H C C D D H H D D C C C C H C H H D D C C C C C H H K H D C D C D D C C K H C C C C C H D Image No. HC MARKER MAIN MOUNT RH HC MARKER MAIN MOUNT LH HHCS 5/8-11X1 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT BEARING HM HHCS 7/16-14X1 1/2 GR5 WASHER LOCK 7/16 PLT NUT HEX 7/16-14 PLT HC MARKER MOUNT PLATE ASS'Y RH HC MARKER MOUNT PLATE ASS'Y LH WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HC MARKER LATCH PIN RH HC MARKER LATCH PIN LH HAIR PIN COTTER 30' HYD MKR MAIN FRAME SECT LH 30' HYD MKR MAIN FRAME SECT RH HALF CLAMP STOP RH HALF CLAMP STOP LH HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT CYL 2X8X12 ROD STOP FOR 30' HYD MARKER U-BOLT 1/2-13 X 2 1/2 X 3 1/2 30' HYD MARKER DISK EXT LH 30' HYD MARKER DISK EXT RH HALF CLAMP 1/4X100 INCHES CHAIN PROOF PLT HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 5/16 X 1 1/4 UTILITY CLEVIS DISK SHAFT MOUNT MARKER DISK SHAFT ASSEMBLY MARKER DISK & DEPTH BAND ASSY RPBY K BRG FLANGE DUST COVER HHCS 5/8-11X1 1/4NYL GR5 RPBY D & C HHCS 5/8-11X3 GR5 RPBY D RPBY D BRG 00IDX78OD DBL SEAL RPBY C MARKER DISK & DEPTH BAND ASSY RPBY K WASHER FLAT 5/8 SAE PLT BRG 00IDX78OD DBL SEAL RPBY C RIVET BUTTON HEAD 3/16 X 5/8 WASHER FLAT 5/8 USS PLT HALF CLAMP CYL LUG-30' & 3 PT RPBY D Shown Shown Shown Shown Replaced by K. 12/26/ P

50 Table of Contents Manual Marker (1980 <-> 1982) Part Number Index P /26/12

51 Table of Contents Part Number Index Markers Manual Marker (1980 <-> 1982) Ref. Part No. Part Description Comments Revision dwg H C C C H C H C C D C C C C D C H C D H C C C H D C D C D D C C C C C C C D K H Image No. HC MARKER MAIN MOUNT LH HHCS 5/8-11X1 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HC MANUAL MARKER MOUNT HHCS 7/16-14X1 GR5 HC MARKER MOUNT PLATE ASS'Y LH WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HC MANUAL MARKER LOCK BAR HHCS 3/8-16X1 1/2 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HC MANUAL MARKER LATCH PIN PIN HAIR COTTER.148 WIRE MARKER BODY ASSEMBLY 5/16 X 1 1/4 UTILITY CLEVIS CHAIN COIL 1/4 HIGH TEST 35 IN MARKER TUBE ASSEMBLY PIN HITCH 1/2 X 3 USABLE LG HHCS 1/2-13X1 1/4 GR5 NUT HEX 1/2-13 PLT MARKER DISK SHAFT ASSEMBLY BRG FLANGE DUST COVER HHCS 5/8-11X1 1/4NYL GR5 RPBY D & C HHCS 5/8-11X3 GR5 RPBY D RPBY D BRG 00IDX78OD DBL SEAL RPBY C WASHER FLAT 5/8 SAE PLT BRG 00IDX78OD DBL SEAL RPBY C RIVET BUTTON HEAD 3/16 X 5/8 WASHER FLAT 5/8 USS PLT RPBY D MARKER DISK & DEPTH BAND ASSY RPBY K 12/26/ P

52 Table of Contents Marker Assembly (1983 <-> 1985) Part Number Index P /26/12

53 Table of Contents Part Number Index Markers Marker Assembly (1983 <-> 1985) Ref. Part No. Part Description Comments Revision dwg H H D C C C C C C C C H C H H H C C C C H K H D C C C C H H D C D C C C C H C Image No. RH FOLDING MARKER MOUNT WELDMT LH FOLDING MARKER MOUNT WELDMT MARKER BODY PIVOT PIN ROLL 3/16X 1 1/2 PLT U-BOLT 5/8-11 X 3 17/32 X 5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 7/16-14X1 3/4 GR5 NUT HEX 7/16-14 PLT WASHER LOCK 7/16 PLT PIN LOCK 1/2 X 3 1/2 USABLE LG MARKER ARM WELDMENT GREASE ZERK STRAIGHT 1/4-28 MARKER LEVER ARM WELDMENT RH MARKER EXTENSION WELDMENT LH MARKER EXTENSION WELDMENT HHCS 5/16-18X1 GR5 RPBY C NUT HEX WHIZ 5/16-18 PLT NUT HEX JAM 1/2-13 PLT DISK BAR WELDMENT MARKER DISK & DEPTH BAND ASSY RPBY K BRG FLANGE DUST COVER HHCS 5/8-11X3 GR5 HHCS 1/2-13X5 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT RH EXT PIVOT BRACKET WELDMENT LH EXT PIVOT BRACKET WELDMENT HINGE PIVOT BAR HHCS 3/8-16X1 1/4 GR5 CHAIN COIL 1/4 HIGH TEST 94 IN WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT SCREW SET SQ HD 1/2-13X1 1/2G5 MARKER MOUNT ADAPTOR WELDMENT U-BOLT 5/8-11 X 4 1/32 X 3 3/8 Shown Shown Shown 12/26/ P

54 Table of Contents Marker Hydraulics (1980 <-> 1982) Part Number Index P /26/12

55 Table of Contents Part Number Index Markers Marker Hydraulics (1980 <-> 1982) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C Image No. CYL 2X8X12 ROD PL 3/8MNPT BREATHER OREL 1/32 3/8FNPTS 3/8MNPT HH1/4R /16 FJIC 3/8MNPT O-RING.644 ID X.818 OD X.087 RPBY C AD 1/2MNPT 3/4FORB TE 1/2FNPT 1/2MNPT 1/2FNPT AD 3/4MORB 1/2MNPT VALVE SEQUENCE 12/26/ P

56 Table of Contents Part Number Index Single Marker Hydraulics (1983 <-> 1985) P /26/12

57 Table of Contents Part Number Index Markers Single Marker Hydraulics (1983 <-> 1985) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C Image No. TE 1/2FNPT 1/2MNPT 1/2FNPT EL 9/16MJIC 1/2MNPT HH1/4R /16 FJIC 3/8MNPT EL 3/8MNPT 3/8FNPTS ONE-WAY RESTRICTOR VALVE AD 3/8MNPT PL 3/8MNPT BREATHER CYL 2X8X12 ROD 12/26/ P

58 Table of Contents Double Disk Opener (1980 <-> 1982) Part Number Index P /26/12

59 Table of Contents Double Disk Opener (1980 <-> 1982) Part Number Index Openers and Opener Frames Ref. Part No. Part Description Comments Revision dwg D A H C C C C C D C D D C C D D D C C C C C C C D C A C C C D D C C C D D D D D A S S C C C C C C A A Image No. D.D. MOUNT `U' 3O'FP & 30'HC D.D. MTG REPAIR RPBY A HHCS 1/2-13X5 1/2 GR5 NUT LOCK 1/2-13 PLT HFSS 1/2-13X1 1/4 GR8 SPRING DISC ARM CASTING SPRING ROD RPBY C NUT HEX WHIZ 1/2-13 DD FLAT SPRING BAR RPBY D HHCS 3/8-16X3 3/4 GR5 NUT LOCK 3/8-16 PLT SCRAPER MOUNT D.D. SLOTTED SCRAPER RPBY D HHCS 5/16-18X1 GR5 RPBY C WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT DISC SPRING BAR WIRE CLIP HHCS 1/4-20X5/8 GR5 13 1/2 BLADE UDPATE-1/4 RIVETS RPBY A BRG 00IDX78OD DBL SEAL RPBY C BRG FLANGE BRG FLANGE DUST COVER HHCS 5/8-11X1 1/4NYL GR5 RIVET,BUTTON HEAD.203 X 9/16 RPBY C 6 ANGLE FILLER STRIP 7 ANGLE FILLER STRIP 8 ANGLE FILLER STRIP 10 ANGLE FILLER STRIP 12 ANGLE FILLER STRIP 13 1/2 BLADE UDPATE-1/4 RIVETS RPBY A RPBY S WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT HC DROP HOSE LONG CLAMP HOSE 1 5/8 NO. 26 RPBY C UPPER FERT HOSE CLAMP DD OPENER ROW ASSEMBLY FRONT DD OPENER ROW ASSEMBLY REAR Includes items 22, 23, 24 and 27 Includes items 22, 23, 24 and 27 Includes items 1 through 27 and 29 through 34 Includes items 1 through 17 and 29 through 34 3rd rev. 12/26/ P

60 Table of Contents Double Disk Opener (1983 <-> 1985) Part Number Index P /26/12

61 Table of Contents Double Disk Opener (1983 <-> 1985) Part Number Index Openers and Opener Frames Ref. Part No. Part Description Comments Revision dwg A H D C D C C S H C D C C C D D C C C C A C C C D C C D C A S S D C D C C C C K K Image No. 3O'FP & 30'HC D.D. MTG REPAIR RPBY A DD SPRING ROD SPRING DD DISC SPRING BAR WIRE CLIP HHCS 3/8-16X3 3/4 GR5 NUT LOCK 3/8-16 PLT SPRING TUBE & CHAIN ASSEMBLY RPBY S HC DROP HOSE LONG SCRAPER MOUNT RHSNB 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT D.D. SLOTTED SCRAPER RPBY D RHSNB 3/8-16X1 GR5 WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 13 1/2 BLADE UDPATE-1/4 RIVETS RPBY A BRG 00IDX78OD DBL SEAL RPBY C BRG FLANGE RIVET,BUTTON HEAD.203 X 9/16 RPBY C BRG FLANGE DUST COVER HHCS 5/8-11X1 1/4NYL GR5 13 1/2 BLADE UDPATE-1/4 RIVETS RPBY A RPBY S FLANGED U MOUNT BRACKET RHSNB 1/2-13X5 1/2 GR5 RPBY C PIN COTTER 3/16 X 1 U-BOLT 1/2-13 X 2 X 3 GR 5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT FRONT DD OPENER ASSY COMPLETE REAR DD OPENER ASS'Y COMPLETE Includes items 18 through 21 3rd rev. 12/26/ P

62 Table of Contents Hoe Shank Opener (1982) Part Number Index P /26/12

63 Table of Contents Hoe Shank Opener (1982) Part Number Index Openers and Opener Frames Ref. Part No. Part Description Comments Revision dwg C D C C C D H C H C C H C C D C C C C C H D D D D A A A A Image No. HC HOE SHANK W/HELPER SPRING HOE SHANK CLAMP HHCS 5/8-11X4 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT REAR SEED HOSE RETAINER SPRING TINE HOE BOOT HOE TIP - DYKO RPBY H / C RHSNB 7/16-14X1 3/4 GR5 NUT HEX WHIZ 7/16-14 PLT TUBE RETAINER ASSEMBLY SCREW PAN HD 1/4-20X5/8 LG NUT SQ 1/4-20 PLT HOE FRONT SEED TUBE CLAMP HOSE 1 1/2 NO. 24 SEED HOSE X 59 RIBS 5-25 HC DROP HOSE LONG CLAMP HOSE 1 5/8 NO. 26 UPPER FERT HOSE CLAMP FERT TUBE RETAINER ASSEMBLY H.C. REAR SEED TUBE HOE SHANK SEED & FERT TUBE H.C. REAR FERT TUBE FERT REAR SHANK HOSE RETAINER HC FRONT HOE SHANK ASSEMBLY HC REAR HOE SHANK ASSEMBLY HC FRONT FERT HOE SHANK HC REAR FERT HOE SHANK For seed and fertilizer, short, rear. For seed and fertilizer, long, front. For seed. For fertilizer. For fertilizer. Includes items 1 through 5, 7 through 14 and 2 Includes items 1 through 12, 14, 15 and 18. Includes items 1 through 5, 7, 8, 9, 11, 12 13, 14, 17, 18 and 2 Includes items 1 through 5, 7, 8, 9, 11, 12 14, 15, 17, 18, 20 and 2 12/26/ P