Parts Manual. Model SRU1999/SR5030 S/N KK1000, S/N KK1005, S/N KK1006, S/N KK1010 and later. Planter Row Unit RU1999 and SRU1999

Size: px

Start display at page:

Download "Parts Manual. Model SRU1999/SR5030 S/N KK1000, S/N KK1005, S/N KK1006, S/N KK1010 and later. Planter Row Unit RU1999 and SRU1999"

Sydney Ray
5 years ago
Views:

When you see this symbol, the subsequent instructions and warnings are serious - follow without

1 Table of Contents Parts Manual Planter Row Unit RU1999 and SRU1999 Model SRU1999/SR5030 S/N KK1000, S/N KK1005, S/N KK1006, S/N KK1010 and later Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2010 Printed 09/23/ P 17664

2 Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Decals...6 Decal Placement...6 Drives...8 Chemical Hopper Drive...8 Seed Hopper Drive...10 Hopper Frame...12 Adjustment Assembly...12 Disk & Scraper...14 Parallel Arm & Hopper Support...16 Shank Assembly...18 Side Gauge Wheel...20 Side Gauge Wheel & Disk Assembly...22 Spring Assembly...24 Hoppers...26 Chemical Hopper...26 Chemical Hopper Primary & Secondary Granular Meter...28 Chemical Hopper Primary Granular Chemical Meter...30 Seed Hopper...32 Meters...34 Brush Meter...34 Finger Pickup Meter...36 Primary & Secondary Granular Meter...38 Options...40 Front Insecticide Diffuser...40 Insecticide Tube...42 Insecticide Tube With Closing Disk...44 Rear Chemical Diffuser...46 Seed Lok ( K)...48 Press Wheels " x 12" Double "V" Press Wheel /2" Press Wheel Closing Disk /2" Press Wheel Closing Disk Mount Copyright 2010 All rights reserved Printed 09/23/10 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /23/10

3 Table of Contents Alphabetized Table of Contents Selected Models 1 1" x 12" Double "V" Press Wheel /2" Press Wheel Closing Disk /2" Press Wheel Closing Disk Mount...54 A Adjustment Assembly...12 B Brush Meter...34 C Chemical Hopper...26 Chemical Hopper Drive...8 Chemical Hopper Primary & Secondary Granular Meter...28 Chemical Hopper Primary Granular Chemical Meter...30 D Decal Placement...6 Disk & Scraper...14 F Finger Pickup Meter...36 Front Insecticide Diffuser...40 I Insecticide Tube...42 Insecticide Tube With Closing Disk...44 P Parallel Arm & Hopper Support...16 Primary & Secondary Granular Meter...38 R Rear Chemical Diffuser...46 S Seed Hopper...32 Seed Hopper Drive...10 Seed Lok ( K)...48 Shank Assembly...18 Side Gauge Wheel...20 Side Gauge Wheel & Disk Assembly...22 Spring Assembly /23/ P

4 Table of Contents P -4-09/23/10

5 Table of Contents 09/23/ P

6 Decal Placement Table of Contents P /23/10

7 Table of Contents Decals Decal Placement Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C Image No. DECAL AMBER REFLECTOR DECAL RED REFLECTOR DECAL AG CHEMICALS DANGER DECAL 1230 RPBY C DECAL GREAT PLAINS PLANTER DECAL 4 COLOR STRIPE - 2 3/8 DECAL 6030 PLANTER DECAL 8030 PLANTER DECAL 8036 PLANTER DECAL 8038 PLANTER DECAL 1030 PLANTER DECAL PLANTER STRIPE 5030 Decal is located on outside rows. For 12 row planter, decal is located on rows 4 and 8. Decal is located on outside rows and if equipped with chemical hopper. For 12 row planter, decal is located on rows 4 and 8. Chemical hopper only. Decal is located on outside rows. Decal is located on outside rows on long row units. Decal is located on outside rows on long row units. Short row units only. Decal is located on outside rows. Decal is located on outside rows. Decal is located on outside rows. Decal is located on outside rows. Decal is located on outside rows. Decal is located on outside rows. 09/23/ P

8 Table of Contents Chemical Hopper Drive P /23/10

9 Table of Contents Drives Chemical Hopper Drive Ref. Part No. Part Description Comments Revision dwg S C C C D C H C H D C C D C C C C D C D Image No. METER CLUTCH, CHEMICIAL SNAP RING EXT 5/8 INV CLIP KNOB, METER CLUTCH NUT HEX WHIZ 5/16-18 PLT FLANGE, HOUSING BRG 35IDX62ODX14 MM RS HOUSING WELD, METER CLUTCH RHSNB 5/16-18X3/4 GR5 RPBY C SHAFT, CLUTCH CHEM PIN ROLL 3/16X1 1/4 PLT SPRING COMP 1.095X1 1/4X.072MW COUPLER, DRIVE PIN ROLL 3/16 X 1 PLT RPBY D RHSNB 5/16-18X2 1/4 GR5 WASHER FLAT 1/4 USS PLT BUSHING, IDLER PIVOT RPBY C PLATE, IDLER RETAINER 09/23/ P

10 Table of Contents Seed Hopper Drive P /23/10

11 Table of Contents Drives Seed Hopper Drive Ref. Part No. Part Description Comments Revision dwg K S C C C D C H C C D C C C D C H D C D C C C C D D C Image No. METER CLUTCH, SEED PLANTER IDLER ASSY SNAP RING EXT 5/8 INV CLIP KNOB, METER CLUTCH NUT HEX WHIZ 5/16-18 PLT FLANGE, HOUSING BRG 35IDX62ODX14 MM RS HOUSING WELD, METER CLUTCH RHSNB 5/16-18X3/4 GR5 DRIVE HUB, METER CLUTCH SHAFT, CLUTCH PIN ROLL 3/16X1 1/4 PLT SPRING COMP.970ODX.063WX1.25 PIN ROLL 3/16 X 1 PLT COUPLER DRIVE, SEED HEX RHSNB 5/16-18X2 1/4 GR5 IDLER WELD BUSHING, IDLER PIVOT RPBY C PLATE, IDLER RETAINER RPBY D HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT TORSION SPRING IDLER FIRMING WHL, MOUNTING COLLAR RPBY C NUT FLANGE LOCK 3/8-16 PLT 09/23/ P

12 Table of Contents Adjustment Assembly P /23/10

13 Table of Contents Hopper Frame Adjustment Assembly Ref. Part No. Part Description Comments Revision dwg D D D D C C C C C Image No. PLANTER HANDLE WALKBEAM WALKBEAM MOUNT WALKBEAM PIVOT PIN WASHER 3/4 X 17/32 X 18 GA PLT PIN COTTER 3/32 X 1 LONG PIN ROLL 5/32 X 1 1/4 PIN ROLL 1/4 X 1 1/2 LG PLT SPRING COMP.72 X 1.5 X.072WD 09/23/ P

14 Disk & Scraper Table of Contents P /23/10

15 Disk & Scraper Table of Contents Hopper Frame Ref. Part No. Part Description Comments Revision dwg C D S C C C D C C D Image No. HHCS 5/8-11X1 1/2 GR5 NYL DD BRG FLANGE DUST COVER RPBY S RPBY H PIN ROLL 5/16 X 3/4 PLT WASHER MACH 1.19 X.63 X 18GA SCRAPER, DISC LH NUT HEX WHIZ 5/16-18 PLT RHSNB 5/16-18X3/4 GR5 SCRAPER, DISC RH Refer to "Side Gauge Wheel & Disk Assembly" for breakdown. 09/23/ P

16 Table of Contents Parallel Arm & Hopper Support P /23/10

17 Table of Contents Hopper Frame Parallel Arm & Hopper Support Ref. Part No. Part Description Comments Revision dwg H H C C D C C C D C H D C H C D C Image No. HOPPER SUPPORT WELD INTERPLANT HOPPER SUPPORT WELD HHCS 5/8-11X2 GR5 WASHER FLAT 5/8 HARD ASTMF436 PARALLEL ARM PIVOT TUBE SEED HOPPER HOOK CUP NUT HEX FLANGE LOCK 5/8-11 PLT RHSNB 3/8-16X1 1/4 GR5 UP-DOWN STOP NUT FLANGE LOCK 3/8-16 PLT PARALLEL ARM WELD MOUNT, UNIT U-BOLT 5/8-11 X 7 1/32 X 8 TOP PARALLEL ARM WELD RHSNB 1/4-20X3/4 GR5 MOUNT, REFLECTOR NUT HEX FLANGE 1/4-20 PLT 09/23/ P

18 Shank Assembly Table of Contents P /23/10

19 Table of Contents Hopper Frame Shank Assembly Ref. Part No. Part Description Comments Revision dwg C D C C C C D C C H S Image No. SNAP RING EXT 5/8.050 T PIN, DEPTH CONTROL PIN CLEVIS 1/4 X 2 1/2 PLT PIN COTTER 3/32 X 1 LONG RPBY C PIN ROLL 5/16 X 7/8 SHIELD, DISK NUT HEX WHIZ 5/16-18 PLT RHSNB 5/16-18X3/4 GR5 SHANK WELD ADJUSTMENT ASSY Refer to "Adjustment Assembly" for breakdown. 09/23/ P

20 Side Gauge Wheel Table of Contents P /23/10

21 Table of Contents Hopper Frame Side Gauge Wheel Ref. Part No. Part Description Comments Revision dwg C C C C D C D D C C C D C D C S C C Image No. HHCS 5/8-11 X 3 GR8 WASHER LOCK SPRING 5/8 PLT 4 X 16 GAUGE TIRE ASSY-PLASTIC WASHER MACH 1.19 X.63 X 18GA ARM, GAUGE WHEEL HHCS 1/2-13X3 GR5 ECCENTRIC BUSHING O-RING BUSHING O-RING 1 1/4ID X 1 1/2ODX1/8 NUT HEX 1/2-13 PLT GREASE ZERK STRAIGHT 1/4-28 RPBY C PIN ROLL 1/8 X 3/8 PLT SPINDLE, GA WHL MNT ADJ SCRW SET SQ HD1/2-13X2 GR5 PLT RPBY C HFS 1/2-13 X 1 1/2 GR8 NYL PLT WASHER LOCK SPRING 1/2 PLT Refer to "Side Gauge Wheel & Disk Assembly" for breakdown. 09/23/ P

22 Table of Contents Side Gauge Wheel & Disk Assembly P /23/10

23 Table of Contents Hopper Frame Side Gauge Wheel & Disk Assembly Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C V C S Image No. HFSS 5/16-18X1 GR5 PLT HFSS 5/16-18X1 3/4 GR5 4 X 16 GAUGE WHEEL RIM HALF 4 1/2 X 16 GAUGE TIRE BRG.63ID PRESS WHL ASY 4 X 16 GAUGE WHEEL RIM FLG TP LK 5/16-18ZNYCR 4 X 16 GAUGE TIRE ASSY-PLASTIC RIVET,BUTTON HEAD 1/4 X 1/2 HSG RIBB FLG 6BOLT PLT BEARING AA205DD RPBY C RPBY S 09/23/ P

24 Spring Assembly Table of Contents P /23/10

25 Table of Contents Hopper Frame Spring Assembly Ref. Part No. Part Description Comments Revision dwg C C C D C C S S C C D H C C Image No. PIN COTTER 1/4 X 2 PLT WASHER FLAT 1 SAE EYE-BOLT 1/2-13 PLT SPRING PLUG.250 DIA. SPRING EXT 2.19ODX.250X6.0 SPRING EXT 2.21ODX.262X6.0 DOWN PRESSURE SPRING ASSY.250 DOWN PRESSURE SPRING ASSY.262 PIN CLEVIS 3/8 X 3 3/4 PLT SPRING.540 O.D.X 1 1/4 X.054W SHAFT, SPRING MOUNT GUIDE WELD T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT Option Option 09/23/ P

26 Chemical Hopper Table of Contents P /23/10

27 Table of Contents Hoppers Chemical Hopper Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C Image No. 96 CHEMICAL HOPPER LID 96 HOPPER LID HOOK PUSH NUT 1/4 96 CHEMICAL HOPPER COVER, CHEM METER HFS X 3/4 PLT HFS X 5/8 SELF-DRILL PLT NUT SQ PLT NUT HEX FLANGE 1/4-20 PLT WASHER FLAT 1/4 USS PLT RHSNB 1/4-20X3/4 GR5 RHSNB 1/4-20X5/8 PLT FUNNEL MOUNT OVER CENTER LATCH 09/23/ P

28 Table of Contents Chemical Hopper Primary & Secondary Granular Meter P /23/10

29 Table of Contents Hoppers Chemical Hopper Primary & Secondary Granular Meter Ref. Part No. Part Description Comments Revision dwg V C V C C C D Image No. PRIMARY CHEMICAL METER ASSY SECONDARY METER COUPLER SECONDARY CHEMICAL METER ASSY HFSS 1/4-20X5/8 GR5 SCREW HEX SELF TAP 1/4-20X3/4 NUT HEX FLANGE 1/4-20 PLT CHEMICAL DIVIDER STAINLESS Refer to "Primary & Secondary Granular Meter" for breakdown. Refer to "Primary & Secondary Granular Meter" for breakdown. 09/23/ P

30 Table of Contents Chemical Hopper Primary Granular Chemical Meter P /23/10

31 Table of Contents Hoppers Chemical Hopper Primary Granular Chemical Meter Ref. Part No. Part Description Comments Revision dwg V C C C D Image No. PRIMARY CHEMICAL METER ASSY NUT HEX WHIZ 1/4-20 PLT HFSS 1/4-20X1/2 GR5 SCREW HEX SELF TAP 1/4-20X3/4 COVER PLATE Refer to "Primary & Secondary Granular Meter" for breakdown. 09/23/ P

32 Seed Hopper Table of Contents P /23/10

33 Seed Hopper Table of Contents Hoppers Ref. Part No. Part Description Comments Revision dwg C C S C C C C C C C C S Image No. NUT HEX WHIZ 5/16-18 PLT WASHER FLAT 5/16 SAE PLT RPBY C NUT HEX FLANGE 1/4-20 PLT OVER CENTER LATCH RHSNB 1/4-20X3/4 GR5 96 SEED HOPPER RHSNB 5/16-18X1 GR5 PUSH NUT 1/4 96 HOPPER LID HOOK 96 SEED HOPPER LID BRUSH METER ASSY (W/O PLATE) Refer to "Finger Pickup Meter" for breakdown. Refer to "Brush Meter" for breakdown. 09/23/ P

34 Brush Meter Table of Contents P /23/10

35 Brush Meter Table of Contents Meters Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C Image No. HOUSING W/BEARING COVER HWHSDFTS #10-24X1/2 PLT PIN ROLL 1/4 X 1 1/2 LG PLT PIN, ROLL 1/4 X 1 1/4 LONG SEED DISC HUB ASSY W/SHLD BOLT WEAR STRIP RETAINING STRIP UPPER BRUSH HOLDER LOWER BRUSH HOLDER SOYBEAN PLATE, 48 CELL SOYBEAN PLATE, 60 CELL MILO PLATE, SMALL 30 CELL MILO PLATE, LARGE 30 CELL MILO, HIGH RATE, SMALL 60 CELL MILO, HIGH RATE, LARGE 60 CELL COTTON, ACID-DELINTED, 30 CELL COTTON, ACID-DELINTED, 36 CELL COTTON, HGH RT ACD-DEL, 48CELL COTTON, HLL DRP ACD-DEL,12CELL NUT WING 1/4-20 NYLOCK PLT Dark blue color coded. Black color coded. Red color coded. Light blue color coded. Red color coded. Yellow color coded. White color coded. Tan color coded. Light green color coded. Brown color coded. 09/23/ P

36 Table of Contents Finger Pickup Meter P /23/10

37 Table of Contents Meters Finger Pickup Meter Ref. Part No. Part Description Comments Revision dwg C C C C D C D C V C V C C C C C C C C C H C C C D C C Image No. PIN ROLL 1/4 X 1 1/2 LG PLT PIN ROLL 3/16X 1 1/2 PLT BRG IB12444SRSE PIN, ROLL 1/4 X 1 1/4 LONG RPBY BRUSH RPBY SP SLTD CTRSNK HD #10X3/4 LG RPBY & SCR PAN HD X 5/8 PLT RPBY SPRING RPBY 31114H1041 RPBY PIN COTTER 5/32 X 1 1/4 LG REPL BY 343BCA NUT HEX WHIZ 1/4-20 PLT HHCS 1/4-20X5/8 GR5 HFSS 1/4-20X1/2 GR5 HHCS 1/4-20X1 1/2 GR2 RPBY RPBY RPBY RPBY COVER RPBY NUT-LOCK 1/4-20 PLT 09/23/ P

38 Table of Contents Primary & Secondary Granular Meter P /23/10

39 Table of Contents Meters Primary & Secondary Granular Meter Ref. Part No. Part Description Comments Revision dwg D D D D C C C C C C C C C C C C C C C C C C C D C V Image No. DETENT CLIP PRIMARY SHAFT DIAL MOUNT ADJUSTMENT ROD HFS X 1/2 TYPE BT PLTD CSPH X 1/2 TYPE BE PLTD HFS X 1 1/4 PLT NUT HEX PLT WASHER FLAT #10 SAE PLT WASHER MACH 1.00 X.625 X 14GA PIN ROLL 1/8 X 1LG. PLT. PIN COTTER 3/32 X 1 LONG PIN ROLL 1/8 X 3/4 PLT KNOB NUMBER DIAL 10 NUMBER DIAL HEX BUSHING FEED ROLLER, HEX BORE ADJUSTMENT BLOCK METERING GATE GATE RETAINER BSHG FLG.891IDX1.125ODX.38L HOUSING SECONDARY SHAFT PIN ROLL 3/16X1 1/4 PLT CALIBRATION TOOL 09/23/ P

40 Table of Contents Front Insecticide Diffuser P /23/10

41 Table of Contents Options Front Insecticide Diffuser Ref. Part No. Part Description Comments Revision dwg C C C R C D C C Image No. CHEMICAL FUNNEL SCREW HEX SLT 10-16X1/2 PLT SINGLE WIRE HOSE CLAMP #14 HOSE 1/2 ID X 1/8 WL CLEAR PVC SP 1/2 HB Y 7 DIFFUSER CONNECTOR TUBE 7 DIFFUSER PIN COTTER.186 WIRE DIA 09/23/ P

42 Insecticide Tube Table of Contents P /23/10

43 Insecticide Tube Table of Contents Options Ref. Part No. Part Description Comments Revision dwg C C C R C D C Image No. CHEMICAL FUNNEL SCREW HEX SLT 10-16X1/2 PLT SINGLE WIRE HOSE CLAMP #14 HOSE 1/2 ID X 1/8 WL CLEAR PVC SP 1/2 HB Y TUBE, CHEM DELIVERY RPBY C 09/23/ P

44 Table of Contents Insecticide Tube With Closing Disk P /23/10

45 Table of Contents Options Insecticide Tube With Closing Disk Ref. Part No. Part Description Comments Revision dwg C C C R C C D Image No. CHEMICAL FUNNEL SCREW HEX SLT 10-16X1/2 PLT SINGLE WIRE HOSE CLAMP #14 PIPE 1" SCH 40 PVC SP 1/2 HB Y RPBY C TUBE, CHEM DELIVERY 09/23/ P

46 Table of Contents Rear Chemical Diffuser P /23/10

47 Table of Contents Options Rear Chemical Diffuser Ref. Part No. Part Description Comments Revision dwg C C C C R D C C D D D H C C D C C C C Image No. NUT HEX FLANGE 1/4-20 PLT WASHER FLAT 1/4 USS PLT CHEMICAL FUNNEL SINGLE WIRE HOSE CLAMP #14 HOSE 1/2 ID X 1/8 WL CLEAR PVC DEFUSSER ROD MTG BRKT RH RHSNB 1/4-20X3/4 GR5 SCREW HEX SLT 10-16X1/2 PLT DEFUSSER ROD DEFUSSER ROD MTG BRKT LH CLAMP PLATE 7 DIFFUSER MOUNT RHSNB 3/8-16X1 1/4 GR5 7 DIFFUSER DIFFUSER PLATE WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT RHSNB 3/8-16X1 3/4 GR5 14 CHEMICAL DIFFUSER 09/23/ P

48 Table of Contents Seed Lok ( K) P /23/10

49 Table of Contents Options Seed Lok ( K) Ref. Part No. Part Description Comments Revision dwg C D C H D C C D C D C C V C C C S C C D D Image No. PIN COTTER 5/32 X 1 1/4 LG LEVER, SEED LOK SPRING.540 O.D.X 1 1/4 X.054W LOCK ROD WELD SEED LOK MOUNT RHSNB 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT JD KINZE SEED LOK LOWER MOUNT SNAP RING 1/2 EXTERNAL HEAVY SEED LOK WHEEL ARM SCR HX SKT BUT CP 3/8-16X3/4 WASHER INTERNAL STAR 3/8 PLT. BRG 203 SEED-LOK WITH PIN SCR PH THD FMG #10X1/2 TP ZP RETAINER W/BONDED SEAL 4BLT 5/8 X 6 SEED LOK WHEEL 6 SEED LOK ASSEMBLY WASHER 1.5 X.51 X.187 SPRING EXT 1 X 4 X.135 WD SEED LOK PIVOT PIN LEVER STOP 09/23/ P

50 Table of Contents 1" x 12" Double "V" Press Wheel P /23/10

51 Table of Contents Press Wheels 1" x 12" Double "V" Press Wheel Ref. Part No. Part Description Comments Revision dwg C C C C C C D D C C D D C C C H D C C C C D Image No. 1 X 12 PRESS WHL ASSY-5203BRG NUT HEX LOCK 1/4-20 FLG 1 X 12 PRESS WHEEL RIM HALF TIRE RUBBER 1 X 12 BRG.63ID PRESS WHL ASY HHCS 1/4-20X1 GR5 PW HANDLE PW HANDLE TUBE PIN COTTER 5/32 X 1 PLT PIN CLEVIS 7/16 X 3 17/64 USBL 1/4 PW SPACER 5/8 DIA PARALLEL ARM PIVOT TUBE HHCS 5/8-11X4 GR5 SPRING EXT 1 7/8ODX8 3/8X.25W NUT HEX FLANGE LOCK 5/8-11 PLT CLOSEING WHEEL ARM WELD CLOSING WHEEL MOUNT HHCS 5/8-11X2 GR5 HHCS 1/2-13X1 1/2 GR5 HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT 1X12 PW ADJUSTER 09/23/ P

52 Table of Contents 6 1/2" Press Wheel Closing Disk P /23/10

53 Table of Contents Press Wheels 6 1/2" Press Wheel Closing Disk Ref. Part No. Part Description Comments Revision dwg C C A C C C D C C H C D C C C C Image No. 6 1/2 X 12 PW ASSEMBLY HFSS 5/16-18X1/2 GR5 HAM RIM 6.5 X 12 HAM.1.5 X.5 ID BALL BEARING HAM. TIRE 6.5 X 12 TRACTION NUT HEX WHIZ 5/16-18 PLT HHCS 1/2-13X10 GR5 NUT HEX FLANGE LOCK 5/8-11 PLT PARALLEL ARM PIVOT TUBE WASHER FLAT 5/8 HARD ASTMF436 HHCS 5/8-11X1 3/4 GR5 ARM WELD 6 1/2 X 12 PW NUT LOCK 1/2-13 PLT 6.5 X 12 PW SPACER TUBE SPRING EXT 1 5/16 X6 7/8 X1/4W 8 CONCAVE DISK HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT 6 1/2" PRESS WHEEL CLOSING DISK MOUNT Refer to "6 1/2" Press Wheel Closing Disk Mount" for breakdown. 09/23/ P

54 Table of Contents 6 1/2" Press Wheel Closing Disk Mount P /23/10

55 Table of Contents Press Wheels 6 1/2" Press Wheel Closing Disk Mount Ref. Part No. Part Description Comments Revision dwg D C C D D D C H C H D C C Image No. ANCHOR, SPRING HHCS 5/8-11X1 3/4 GR5 WASHER LOCK SPRING 5/8 PLT MOUNT, CLOSING DISK ARM PARALLEL ARM PIVOT TUBE PIN, STOP PIN ROLL 1/4 X 1 PLATED CLOSING DISK ARM WELD HHCS 1/2-13X3 GR5 SPTHD CLOSING DISK SPRING CAM SPRING PIVOT NUT SPRING TORSION.250 WIRE NUT LOCK 1/2-13 PLT 09/23/ P

56 Table of Contents The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page D D V V A D D S D D H H D D D D D D D D H D D V D V D S V...29, V D D V D S D D D D...43, S S D D...9, H D H...9, K S...15, D D H D H H H H H H S D D S D D D D D D...9, D...17, 51, 53, D D...9, D D D D D D D D D D D H H H D H D D D D D D D S S D C C...41, 43, 45, C C...27, C...9, C...43, C C C C...27, C C...41, 43, 45, C C...29, C C C C C C C C C C...17, 27, 33, C C C C...53, C...17, C C C C...9, 11, 15, 19, C C...31, C...17, C C C C...9, C C...51, C C C C C C C C C C C C C...53, C C... 9, 11, 15, 19, 33, 49, C C C...31, C...11, C C...17, 27, 29, 33, C...17, 51, C C C...11, C...21, 51, C...21, C C C...15, C C...9, 27, C C...17, C C C C C C...9, C...9, 11, C C C...37, C C...13, 19, C C C...13, 35, C C C C...35, C C C C C C C...25, C C C C C C C C C C C C C C C C C C C...21, C C C C...41, C C C C C C C C C C C C C C C C C...41, 43, 45, C C C C C C...27, C C C C C C C C C C C...9, C C C C...9, C C C C C C C C C C C C C C C C C...9, P /23/10

57 Table of Contents (continued) Part Number Page C C...23, C...41, 43, C C C C C C C C C C C C C C R...41, 43, R...45 dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg /23/ P

58 Great Plains Mfg., Inc E. North Street Salina, Kansas USA

Parts Manual. Lister-Cultivator LC25. Copyright 2017 Printed 06/28/ P

Parts Manual. Lister-Cultivator LC25. Copyright 2017 Printed 06/28/ P Table of Contents Parts Manual LC25 Lister-Cultivator Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your