Parts Manual. Center Pivot Hitch CPH-12, CPH-15, & CPH-20. Copyright 2017 Printed 03/27/ P

Transcription

1 Table of Contents Part Number Index Parts Manual CPH-12, CPH-15, & CPH-20 Center Pivot Hitch Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 03/27/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frames...6 Hitch Assembly...6 Tongue...8 Tool Bar...10 Main Frame...12 Level Link...16 LED Lights (S/N 1195Z+)...18 Transport...20 Transport Wheel...20 Coulters...22 Coulter (S/N 9791Z-)...22 Coulter (S/N 9792Z+)...24 Hydraulics...26 Hydraulics...26 Tongue Cylinder C...28 Rephasing Transport Cylinder C...30 Transport Cylinder C...32 Rephasing Transport Cylinder C...34 Rephasing Transport Cylinder C...36 Rephasing Transport Cylinder C...38 Decals...40 Decal Placement...40 Options...42 Coulter Depth Control Hydraulics (Options)...42 Coulter Tool Bar Brace...44 Weight Frame Bracket ( A)...46 John Deere Weight Bracket ( A)...48 Case I.H. Weight Bracket ( A)...50 Marker Assembly...52 Marker Disk Assembly...54 Marker Hydraulics...56 Marker Hydraulic Cylinder ( C)...58 Part Number Index...60 Copyright 2017 All rights reserved Printed 03/27/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /27/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models C Case I.H. Weight Bracket ( A)...50 Coulter (S/N 9791Z-)...22 Coulter (S/N 9792Z+)...24 Coulter Depth Control Hydraulics (Options)...42 Coulter Tool Bar Brace...44 D Decal Placement...40 H Hitch Assembly...6 Hydraulics...26 J John Deere Weight Bracket ( A)...48 L LED Lights (S/N 1195Z+)...18 Level Link...16 M Main Frame...12 Marker Assembly...52 Marker Disk Assembly...54 Marker Hydraulic Cylinder ( C)...58 Marker Hydraulics...56 R Rephasing Transport Cylinder C...30 Rephasing Transport Cylinder C...34 Rephasing Transport Cylinder C...36 Rephasing Transport Cylinder C...38 T Tongue...8 Tongue Cylinder C...28 Tool Bar...10 Transport Cylinder C...32 Transport Wheel...20 W Weight Frame Bracket ( A) /27/ P

4 Table of Contents Part Number Index P /27/18

5 Table of Contents Part Number Index 03/27/ P

6 Hitch Assembly Table of Contents Part Number Index P /27/18

7 Hitch Assembly Table of Contents Part Number Index Frames Ref. Part No. Part Description Comments Revision dwg C C H C C C H D C C Image No. NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT FRONT HITCH WELDMENT WASHER FLAT 3/4 USS PLT HHCS 3/4-10X9 GR5 HHCS 1-8X10 GR5 PLT FRONT HITCH INNER TUBE WLDMT RPBY D WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT 03/27/ P

8 Tongue Table of Contents Part Number Index P /27/18

9 Tongue Table of Contents Part Number Index Frames Ref. Part No. Part Description Comments Revision dwg C C C H C D C C C C D C H C D C D C C C C C H D C H C C D C H H C C D C C C C C C C Image No. SCREW JACK 5000# SD-WND NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT FRONT TONGUE WELDMENT SAFETY CHAIN LB SAFETY CHAIN WASHER HHCS 1 1/4-7X4 GR5 CYL 3X8X1.25 ROD (TIE) NO PINS PIN CLEVIS 1 X 2 3/4 USABLE LG WASHER FLAT 1/2 USS PLT TONGUE REAR CROSS PIN PIN 3/8 X 3 USABLE LW/PIN CYLINDER LOCK CHANNEL PIN HAIR COTTER.094 DEPTH INDICATOR PLATE DECAL STROKE GAUGE TONGUE LINK WASHER FLAT 1 SAE BUSHING CYL 1 1/4 X 1 X 1 GREASE ZERK STRAIGHT 1/4-28 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT LEVEL LINK PIVOT LEVER LINK PIVOT CROSS PIN HHCS 1-8X7 GR5 CENTER PIVOT HITCH TONGUE PIN ROLL 3/8 X 2 1/2 PLT BUSHING 1 3/4X1 1/2X3 1/2LONG CLEVIS PIVOT TUBE HHCS 1-8X2 1/2 GR5 STROKE GAUGE POINTER STROKE GAUGE POINTER 3000PSI PIN COTTER 1/4 X 2 PLT NUT HEX 1-8 NYLON INSERT PLT WASHER - SAFETY CHAIN SA SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT HHCS 5/8-11X2 3/4 GR5 NUT LOCK 5/8-11 PLT BUSHING SPINDLE 1 1/2X1 1/4X1 PIN HAIR COTTER.148 WIRE Refer to "Tongue Cylinder C" for breakdown. Formerly C For 2 1/2" clevis For 2" clevis Formerly D 2nd rev. 1st rev. 03/27/ P

10 Tool Bar Table of Contents Part Number Index P /27/18

11 Tool Bar Table of Contents Part Number Index Frames Ref. Part No. Part Description Comments Revision dwg C C C C D C C D C C C D D D D Image No. 4 X 4 1/4 END CAP 4 X 4 X 3/16 END CAP WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT COULTER BAR CLAMP WASHER FLAT 5/8 USS PLT HHCS 5/8-11X6 1/2 GR5 COULTER BAR CHANNEL BRACE HHCS 5/8-11X7 GR5 HHCS 5/8-11X8 GR5 U-BOLT 5/ /32 X 6 12' COULTER TOOL BAR TUBE 15' COULTER TOOL BAR TUBE 20' COULTER TOOL BAR TUBE COULTER TOOL BAR TIE STRAP Coulter Assembly refer to "Coulter (S/N 9791Z-)" 03/27/ P

12 Main Frame Table of Contents Part Number Index P /27/18

13 Main Frame Table of Contents Part Number Index Frames Ref. Part No. Part Description Comments Revision dwg H D C C C D C C C C C C C C C C C D C D D C C C C C C C C C D C D C C C C C C D C H C C C C H C C H H D C C C D C Image No. PULL HITCH AXLE FRAME PIVOT SHAFT HHCS 7/8-9X5 1/2 GR5 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT REPLACED BY C BRONZE PIVOT BEARING 3.25 I.D. NUT HEX SLOTTED 1 1/4-7 PIN COTTER 5/16 X 2 1/2 HHCS 3/4-10X7 GR5 GREASE ZERK STRAIGHT 1/ FT CPH SLIDE BLOCK 20 FT CPH SLIDE BLOCK NUT HEX JAM 3/8-16 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT FRONT SLIDE BLOCK FRONT SLIDE BLOCK BACK PLATE NUT HEX SLOTTED 5/8-11 PLT GR5 UPPER ROLLER MACHINED UPPER ROLLER SHAFT CYLINDER STABILIZER STABILIZER CYL. BOOT HHCS 5/8-11X3 GR5 WASHER FLAT 5/8 SAE PLT NUT HEX JAM 5/8-11 PLT NUT LOCK 5/8-11 PLT PIN COTTER 3/16 X 1 1/4 PLT SPRING LEAF 4 LEAVES SPRING LEAF ROLLER STOP PIN ROLL 1/4X1 3/4 ROLLER STOP PIN U-BOLT 3/8-16 X 1 7/8 X 8 GR 5 NUT LOCK 3/8-16 PLT U-BOLT 1/2-13 X 1 13/16 X3 3/4 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT FRAME SPRING ROD PIVOT STOP SPRING PIVOT LOCK SCREW SET SH 3/8-16X3/8 TYPE C NUT HEX JAM 1-8 PLT HHCS 1-8X3 GR5 FTHD PIN HITCH 1 X 6 W/HAIRPIN LOCK HANDLE WELDMENT PIN ROLL 1/4 X 1 PLATED SPRING LEVER SPRING LEVER WELDMENT PIN LOCK WELDMENT PIN LOCK PIVOT PIN PIN SPIROL 1/2X2 1/2 PLAIN SCREW SET SQ HD 3/8-16 X 3/4CP HHCS 5/8-11X2 GR5 WEIGHT BRKT ADJUSTMENT LEG WASHER LOCK SPRING 5/8 PLT 03/27/ P

14 Table of Contents Main Frame (continued) Part Number Index Ref Part No C H H C H H H H C C C C D Part Description WASHER FLAT 5/8 USS PLT INNER AXLE SLIDE TUBE WELDMENT INNER AXLE SLIDE TUBE WLDT-20 HHCS 1/2-13X5 1/2 FTHD 3 CYL BRACE WLMT 3 1/4 & 3 1/2 CYL BRACE WLMT 4 CYL BRACE WLMT 4 1/4 CYL BRACE WLMT NUT HEX JAM 1/2-13 PLT WASHER FLAT 1/2 USS PLT SPRING DIE 1OD X 1/2ID X 1 3/4 NUT HEX NYLOCK 1/2-13 LONG 1X12 PW HANDLE SPACER TB Comments Revision P /27/18

15 Table of Contents Part Number Index Frames Main Frame (continued) This Page Intentionally Left Blank 03/27/ P

16 Level Link Table of Contents Part Number Index P /27/18

17 Level Link Table of Contents Part Number Index Frames Ref. Part No. Part Description Comments Revision dwg C C K C D H H H C C C H D C C Image No. WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT 94 CPH LEVEL LINK TUBE ASSY NUT HEX 1 1/4-7 PLT BALL JOINT SPACER TUBE LEVEL LINK ADJUSTER LEVEL LINK WELDMENT LEVEL LINK LOCK PLATE HHCS 5/8-11X3 GR5 NUT LOCK 5/8-11 PLT SPRING, LEVEL LINK LOCK HITCH EXTENSION HITCH BAR SLEEVE PIN HITCH 1 X 3 3/4 USABLE PLT HHCS 1-8X5 1/2 GR5 Includes items 4, /27/ P

18 Table of Contents LED Lights (S/N 1195Z+) Part Number Index P /27/18

19 Table of Contents Part Number Index Frames LED Lights (S/N 1195Z+) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D C C C D C C C C C C C C C C D C C C C C C C Image No. LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED DECAL REFLECTOR DAYTIME 2X9 DECAL REFLECTOR RED 2X9 DECAL REFLECTOR AMBER 2X9 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT U-BOLT 5/16-18X2 1/32X2 11/16 DECAL MOUNT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT U-BOLT 1/2-13 X 4 1/32 X 7 1/4 LIGHT BRACKET NUT HEX NYLOCK 1/4-20 U-BOLT 1/4-20 X 2 9/32 X 3 GR2 SCREW RD HD 1/4-20 X 5/8 DECAL SLOW MOVING-GALV. BACKED WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT RHSNB 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT ADHESIVE BACK CORD CLIP SMV BLADE MOUNT HHCS 1/4-20X1 GR5 LIGHT HRNSS ENHANCE MODULE LED DUAL MACHINE HARNESS 24" - LED HHCS 1/4-20X1 1/4 GR5 HARNESS EXT. 10' 2 PIN WP LIGHT HRNSS, 10' WISHBONE -LED LIGHT HARNESS, 20' LEAD - LED Used with CPH20 only. 03/27/ P

20 Transport Wheel Table of Contents Part Number Index P /27/18

21 Transport Wheel Table of Contents Part Number Index Transport Ref. Part No. Part Description Comments Revision dwg H C C C C C C C C C D C S C C C K H C C V C C D C C C D C S C C C C K K C K C D D C C C C Image No. INNER AXLE SLIDE TUBE WLDT-20 SEAL 3 X 2.25 X.25 CR BEARING CONE #LM BEARING CUP #LM BOLT WHEEL 1/2-20X1 90-DEG BEARING CUP LM BEARING CONE LM WASHER SPINDLE - 7/8 PIN COTTER 3/16 X 1 1/4 PLT NUT HEX SLOTTED 7/8-14 PLT HUB GREASE CAP 6H-06AA HUB PACKAGE LESS SEAL 20' CDH HUB ASSEMBLY TIRE 11L-15SL 12 PLY TUBELESS VALVE STEM TR415X.625X1 1/4 LG WHEEL 15 DIAX10WIDEX6BLT BKSN TRANSPORT WHEEL/TIRE ASY BKSN INNER AXLE SLIDE TUBE WELDMENT HHCS 1/2-13X3 1/4 GR5 HUB 6 BOLT 4 5/8 PILOT W/ CUPS REPLACED BY C NUT LOCK 1/2-13 PLT SPINDLE SGL 1.75X10.72 REPLACED BY C SEAL 2.56X1.625X.438 CR16289 BEARING CONE LM BEARING CUP LM H5-A WHEEL HUB MACH 6-BOLT HUB 6 BOLT 4 5/8 PILOT 3600 LB REPLACED BY C TIRE 9.5L X PLY-TUBELESS TUBE 9.5LX15-8 PLY W/CAL STEM WHEEL 8 X 15 X 6 BOLT WHEEL 15X8 6 BOLT BUCKSKIN PVT PL HITCH TRNSP WHL&TIRE PVT PL HTCH TRNSP WHL&TIRE BKS HUB AND SPINDLE ASSY 6 BOLT REPLACED BY C 6H-06AA HUB PACKAGE LESS SEAL H-06A W.H.6BT RPLBY C WHEEL REINFORCING RING HFS 1/2-20X1 1/2 GR5 PIN COTTER 5/32 X 1 3/4 LG DECAL CAUTION TIRE 52 PSI DECAL CAUTION TIRE 60PSI/85FT Includes items 3, 4, 6, 7, 11, 13 Includes items 2, 5, 12 Includes items 6, 7, 8, 10, 11, 20, 23, 24, 25 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. (S/N 11689Z-) (S/N 11690Z+) (S/N 11689Z-) Includes items 28, 29, 30 (S/N 11690Z+) Includes items 5, 8, 9, 10, 22, 27 2nd rev. 1st rev. Refer to item /27/ P

22 Table of Contents Coulter (S/N 9791Z-) Part Number Index P /27/18

23 Table of Contents Part Number Index Coulters Coulter (S/N 9791Z-) Ref. Part No. Part Description Comments Revision dwg S E E C C H C D C D D C C C D C C C C C C C C V D C S C C C C C C C C C C C C D C C C D D D Image No. RPBY A FERT COULTER SWING ARM RPBY E WASHER FLAT 1 1/4 SAE PLT PIN COTTER 1/4 X 2 PLT COULTER SPRING ROD WLDMT NUT HEX JAM 3/4-10 PLT SPRING 2.25 O.D. X.5 COIL SPRING 2.25 OD X.5 COIL SPRING ROD SLEEVE 1 1/8 OD COULTER SPRING WASHER CASTING COULTER SPRING WASHER NUT HEX FLANGE LOCK 3/4-10 PLT BUSHING COULTER CASTING LONG COULT. SPRING BAR LONG COULTER SPRING BAR HHCS 7/8-9X2 3/4 GR5 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT RHSNB 1/2-13X1 1/4 GR5 OIL-SEAL DOUBLE LIP BEARING CONE LM BEARING CUP LM COULTER HUB & CUP ASSY HUB GREASE CAP GREASE ZERK STRAIGHT 1/4-28 COULTER HUB PACKAGE PIN COTTER 3/16 X 1 3/4 PLT COULTER BLADE FLUTED 17 COULTER BLADE 5/8 WAVY 17 COULTER BLADE 3/4 WAVY 5/8 WAVY TURBO BLADE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT U-BOLT 5/ /32 X 6 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT COULTER CLAMP BAR HHCS 1/2-13X1 3/4 GR5 SWING ARM BUSHING BUSHING 1.50ODX1.25IDX2.94 RPBY A COULTER PIVOT SHAFT SPINDLE COULTER Includes items 36,37; Replaced D Includes items 38,39 Includes items 17, 18, 19, 20, 22 2nd rev. Use existing stock; 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 03/27/ P

24 Table of Contents Coulter (S/N 9792Z+) Part Number Index P /27/18

25 Table of Contents Part Number Index Coulters Coulter (S/N 9792Z+) Ref. Part No. Part Description Comments Revision dwg S H D C C C C C C C C C C C C C C C C C D D V D C C C C C C C C C C C C C Image No. CLTR CASTING ASSY CLTR SWING ARM WLMT HUB GREASE CAP EYE BOLT 3/4-10X14 3/4 LG SP COULTER SPRING GUIDE TUBE GREASE ZERK STRAIGHT 1/4-28 HHCS 7/8-9X2 3/4 GR5 WASHER MACH 1 1/4X3/4X14GA SNAP RING 3/4 EXTERNAL HEAVY NUT HEX SLOTTED 7/8-14 PLT NUT HEX JAM 3/4-10 PLT NUT HEX 7/8-9 PLT BUSHING 1X3/4X1 1/8 FLG HD OIL-SEAL DOUBLE LIP BEARING CONE LM WASHER LOCK SPRING 7/8 PLT WASHER MACH 1 7/8X1 1/4X 14GA WASHER SPINDLE - 7/8 PIN COTTER 3/16 X 1 3/4 PLT SNAP RING EXT 1 1/4 HEAVY COULT. SPRING BAR SPRING 2.25 O.D. X.5 COIL COULTER HUB & CUP ASSY COULTER SPRING WASHER RHSNB 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT COULTER BLADE FLUTED 17 COULTER BLADE 5/8 WAVY 17 COULTER BLADE 3/4 WAVY 5/8 WAVY TURBO BLADE 18 INCH TURBO COULTER BLADE 18 IN. 3/4 WAVY COULTER BLADE WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 1/2-13X1 3/4 GR5 U-BOLT 5/ /32 X 6 03/27/ P

26 Hydraulics Table of Contents Part Number Index P /27/18

27 Hydraulics Table of Contents Part Number Index Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C H H H H C C C C C C Image No. CYL REP 4.25X24X1.5 ROD (TIE) CYL REP 3.5X24X1.25 ROD (TIE) CYL REP 3.25X24X1.25 ROD (TIE) CYL REP 4X24X1.37 ROD (TIE) CYL REP 3.25X24X1.25 ROD (TIE) CYL REP 3X24X1.25 ROD (TIE) CYL 3X8X1.25 ROD (TIE) NO PINS EL 3/4MJIC 3/4MORB HH1/2R /4FJIC HH1/2R /4MORB 3/4FJIC HH1/2R /4MORB 3/4FJIC HHCS 1/2-13X5 1/2 FTHD 3 CYL BRACE WLMT 3 1/4 & 3 1/2 CYL BRACE WLMT 4 CYL BRACE WLMT 4 1/4 CYL BRACE WLMT NUT HEX JAM 1/2-13 PLT WASHER FLAT 1/2 USS PLT SPRING DIE 1OD X 1/2ID X 1 3/4 NUT HEX NYLOCK 1/2-13 MW STOP BUSH SET 1 1/4 SBS125 MW STOP BUSH SET 1 1/2 SBS150 CPH w/dry Fertilizer. Refer to "Rephasing Transport Cylinder C" for breakdown. 20' CPH Non-Fertilizer. Refer to "Rephasing Transport Cylinder C" for breakdown. 12' & 15' CPH Non-Fertilizer. Refer to "Transport Cylinder C" for breakdown. CPH w/dry Fertilizer. Refer to "Rephasing Transport Cylinder C" for breakdown. 20' CPH Non-Fertilizer. Refer to "Transport Cylinder C" for breakdown. 12' & 15' CPH Non-Fertilizer. Refer to "Rephasing Transport Cylinder C" for breakdown. Refer to "Tongue Cylinder C" for breakdown. CPH Non-Fertilizer CPH w/dry Fertilizer /27/ P

28 Table of Contents Tongue Cylinder C Part Number Index P /27/18

29 Table of Contents Part Number Index Hydraulics Tongue Cylinder C Ref. Part No. Part Description Comments Revision dwg M7016 2M4416 3R1412 4M4104 5M4116 6R1164 7M4316 2A0208 2A0024 2A0014 2A0012 2A0006 2A C Image No. CLEVIS ROD MIDWAY MW ROD 1-1/4 DIA X 8 STROKE MW HEAD 3X1-1/4 ROD PT.E RPBY 4M4108 MW TUBE 3 X 8 CYLINDER MW BASE MW TIE ROD 3 X 8 CYLINDER RPBY C WIPER SEAL O-RING BACK-UP O-RING BACK-UP MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C RPBY C MW PIN CLIP CYL SEAL KIT MW (5A4104) 3 X 7 Only available in item 19. Only available in item 19. Only available in item 19. Only available in item 19. Only available in item /27/ P

30 Table of Contents Part Number Index Rephasing Transport Cylinder C P /27/18

31 Table of Contents Part Number Index Hydraulics Rephasing Transport Cylinder C Ref. Part No. Part Description Comments Revision dwg M7016 2M4434 3R1412 4R1106 5R1132 6R1164 7M4412 2A0024 2A0014 2A0012 2A C Image No. CLEVIS ROD MIDWAY MW ROD MW HEAD 3X1-1/4 ROD PT.E RPBY 4R1108 MW TUBE MW BASE MW TIE ROD WIPER SEAL O-RING BACK-UP O-RING BACK-UP TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C RPBY C SEAL KIT MW 3 RPHCYL 4A /27/ P

32 Table of Contents Transport Cylinder C Part Number Index P /27/18

33 Table of Contents Part Number Index Hydraulics Transport Cylinder C Ref. Part No. Part Description Comments Revision dwg M7016 2M5434 3R2412 4R2106 5R2132 6R2164 7M5412 2A0024 2A0016 2A0012 2A C Image No. CLEVIS ROD MIDWAY MW ROD MW HEAD RPBY 4R2108 MW TUBE BASE MIDWAY MW TIE ROD WIPER SEAL O-RING BACK-UP O-RING BACK-UP TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C RPBY C SEAL KIT MW 3.25 RPHCYL 4A /27/ P

34 Table of Contents Part Number Index Rephasing Transport Cylinder C P /27/18

35 Table of Contents Part Number Index Hydraulics Rephasing Transport Cylinder C Ref. Part No. Part Description Comments Revision dwg M7016 2M5434 3R3412 4R3106 5R3132 6R3164 7M5412 2A0024 2A0016 2A0012 2A C Image No. CLEVIS ROD MIDWAY MW ROD MW HEAD RPBY 4R3108 MW TUBE BASE MIDWAY MW TIE ROD WIPER SEAL O-RING BACK-UP O-RING BACK-UP TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C RPBY C SEAL KIT MW 3.5 RPHCYL 4A /27/ P

36 Table of Contents Part Number Index Rephasing Transport Cylinder C P /27/18

37 Table of Contents Part Number Index Hydraulics Rephasing Transport Cylinder C Ref. Part No. Part Description Comments Revision dwg M7016 2M6832 3R5812 4R5108 5R5132 6R5164 7M6426 2A0024 2A0018 2A0012 2A C Image No. CLEVIS ROD MIDWAY MW ROD MW HEAD PISTON MIDWAY MW TUBE BASE MIDWAY MW TIE ROD WIPER SEAL O-RING BACK-UP O-RING BACK-UP TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C RPBY C SEAL KIT MW 4 RPH CYL 4A /27/ P

38 Table of Contents Part Number Index Rephasing Transport Cylinder C P /27/18

39 Table of Contents Part Number Index Hydraulics Rephasing Transport Cylinder C Ref. Part No. Part Description Comments Revision dwg M7016 2M7532 3R6912 4R6108 5R6132 6R6164 7M7426 2A0024 2A0019 2A0012 2A C Image No. CLEVIS ROD MIDWAY MW ROD HEAD MIDWAY PISTON MIDWAY MW TUBE MW BASE MW TIE ROD WIPER SEAL O-RING BACK-UP O-RING BACK-UP TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1-14 RPBY C RPBY C RPBY C SEAL KIT MW 4.25 RPHCYL 4A /27/ P

40 Decal Placement Table of Contents Part Number Index P /27/18

41 Table of Contents Part Number Index Decals Decal Placement Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C Image No. DECAL CAUTION PIVOT PULL HITCH DECAL WARNING NEG TONGUE WT DECAL STROKE GAUGE DECAL REFLECTOR AMBER 2X9 DECAL CAUTION TIRES NOT A STEP DECAL WARNING 20 MPH TRANS LRG DECAL LOGO&GP F/STRIPE 4 X 24 DECAL GREAT PLAINS LOGO DECAL CPH-12 DECAL CENTER PIVOT HITCH 1200 DECAL CPH-15 RPBY C DECAL CPH-20 RPBY C DECAL 3 COLOR STRIPE 2.50 WIDE AG LIGHT HARNESS, EXT-15' AG LIGHT HARNESS, EXT-15' LED DECAL REFLECTOR DAYTIME 2X9 DECAL REFLECTOR RED 2X <-> <-> <-> <-> (S/N 11475Z-) (S/N 11476Z Z) (S/N 11957Z+) (S/N 11957Z+) Rev. 2 is not interchangeable w/rev. 1 1st rev. Rev. 2 is not interchangeable w/rev. 1 1st rev. Rev. 2 is not interchangeable w/rev. 1 1st rev. Rev. 2 is not interchangeable w/rev. 1 1st rev. 03/27/ P

42 Table of Contents Part Number Index Coulter Depth Control Hydraulics (Options) P /27/18

43 Table of Contents Part Number Index Options Coulter Depth Control Hydraulics (Options) Ref. Part No. Part Description Comments Revision dwg S C Image No. 6 CYL DEPTH CHANNEL ASY PIN 3/8 X 3 USABLE LW/PIN Formerly C 03/27/ P

44 Table of Contents Coulter Tool Bar Brace Part Number Index P /27/18

45 Table of Contents Part Number Index Options Coulter Tool Bar Brace Ref. Part No. Part Description Comments Revision dwg H H C C C H C C C C C D Image No. 20'CPH TOOL BAR BRACE WLMT LH 20'CPH TOOL BAR BRACE WLMT RH HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 20'TOOL BAR SUPPORT WLMT U-BOLT 5/8-11 X 4 1/32 X 7 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT WASHER LOCK 1 1/4 SPRING PLT HHCS 1 1/4-7X2 1/2 GR5 CPH BRACE KIT SPACER 03/27/ P

46 Table of Contents Weight Frame Bracket ( A) Part Number Index P /27/18

47 Table of Contents Part Number Index Options Weight Frame Bracket ( A) Ref. Part No. Part Description Comments Revision dwg C C C C D H C C Image No. NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 5/8 USS PLT HHCS 5/8-11X6 1/2 GR5 COULTER BAR CLAMP TOOL BAR WEIGHT BRACKET FRAME HHCS 5/8-11X8 GR5 U-BOLT 5/ /32 X 6 03/27/ P

48 Table of Contents John Deere Weight Bracket ( A) Part Number Index P /27/18

49 Table of Contents Part Number Index Options John Deere Weight Bracket ( A) Ref. Part No. Part Description Comments Revision dwg C C C C C C H Image No. WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT CASTING J.D. WEIGHT BRACKET HHCS 3/4-10X7 GR5 CASTING JD SUITCASE WEIGHT HHCS 5/8-11X14 GR5 NUT STRAP WELDMENT 03/27/ P

50 Table of Contents Case I.H. Weight Bracket ( A) Part Number Index P /27/18

51 Table of Contents Part Number Index Options Case I.H. Weight Bracket ( A) Ref. Part No. Part Description Comments Revision dwg C C H C C C C C D C C C Image No. WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT I.H. STEEL WEIGHT BRACKET HHCS 3/4-10X2 1/4 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 5/8 SAE PLT CASTING CAM ANGLE LOCK BAR HHCS 5/8-11X3 GR5 CASTING IH SUITCASE WEIGHT CASTING CASE SUITCASE WEIGHT 03/27/ P

52 Marker Assembly Table of Contents Part Number Index (Applies to CPH12 (1994+) only) P /27/18

53 Table of Contents Part Number Index Options Marker Assembly (Applies to CPH12 (1994+) only) Ref. Part No. Part Description Comments Revision dwg C C C C C H C C C C C C C H C C C C H C D C H C C C C D C C C H C C C C C C Image No. EL 9/16MJIC 9/16FJIC AD 9/16MORB 9/16MJIC HHCS 3/8-16X5 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT MARKER MOUNTING BRACKET WLMT U-BOLT 5/8-11 X 4 X 5 1/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT WASHER FLAT 1 1/4 USS PLT PIN COTTER 7/32 X 2 BUSH1 1/2ODX1 1/4IDX1 1/4LG GG HHCS 1/2-13X3 1/4 GR5 MARKER HINGE WELDMENT NUT HEX NYLOCK 1/2-13 NUT LOCK 5/16-18 PLT GREASE ZERK STRAIGHT 1/4-28 PIN CLEVIS 1 X 2 1/4 GR5 PLT MARKER PIVOT PIN WLMT CYL 2X14X1.12 ROD (TIE ROD) MARKER LINK ARM BUSHING CYL 1 1/4 X 1 X 1 MARKER ARM WELDMENT RD BUMP STOP 2 X 1 X 1/2-13 HHCS 1/2-13X2 1/2 GR5 U-BOLT 3/8-16 X 2 X 2 3/4 NUT LOCK 3/8-16 NYLON INSERT MARKER DISC MOUNTING TUBE HHCS 5/16-18X1 1/2 GR5 DECAL WARNING PINCH/SHEAR HAZ DECAL WARNING OVERHEAD MKR HAZ MARKER CYLINDER CHANNEL WLMT CABLE TIE 22.2 LONG REL. PIN COTTER 3/16 X 2 WASHER FLAT 1 USS PLT WASHER LOCK SPRING 1/2 PLT DECAL AMBER REFLECTOR WASHER FLAT 5/16 SAE PLT 03/27/ P

54 Table of Contents Marker Disk Assembly Part Number Index (Applies to CPH12 (1994+) only) P /27/18

55 Table of Contents Part Number Index Options Marker Disk Assembly (Applies to CPH12 (1994+) only) Ref. Part No. Part Description Comments Revision dwg C C C H C C D C C C C V C C C C S D C Image No. NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT MARKER DISC ADJUSTMENT WLMT RHSNB 1/2-13X2 3/4 GR5 HHCS 1/2-13X3 GR5 MARKER DISC SPINDLE PIN COTTER 5/32 X 1 1/4 LG TINE GAUGE WHEEL HUB SEAL BRG CONE 1.00ID L BOLT NOTCHED MARKER DISK NO-TILL MARKER HUB AND CUP ASY RHSNB 1/2-13X1 1/4 GR5 WASHER FLAT 3/4 SAE PLT NUT HEX SLOTTED 3/4-16 RPBY C NO-TILL MARKER DISK HUB ASY CAST MARKER DISK DPTH RING BRG CUP 1.98OD L /27/ P

56 Table of Contents Marker Hydraulics Part Number Index (Applies to CPH12 (1994+) only) P /27/18

57 Table of Contents Part Number Index Options Marker Hydraulics (Applies to CPH12 (1994+) only) Ref. Part No. Part Description Comments Revision dwg C C C C D C C C C C C C C Image No. HH1/2R /4FJIC 1/2MNPT AD 9/16MORB 9/16MJIC CABLE TIE 28 LONG VALVE,SEQUENCE SHOEMAKER 1000 MARKER SEQUENCE VALVE MNT HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT U-BOLT 1/2-13 X 8 1/16 X NUT NYLOCK JAM NUT 1/2-13 HH1/4R /16FJIC HH1/4R /16FJIC EL 9/16MJIC 9/16FJIC CYL 2X14X1.12 ROD (TIE ROD) 03/27/ P

58 Table of Contents Marker Hydraulic Cylinder ( C) Part Number Index (Applies to CPH12 (1994+) only) P /27/18

59 Table of Contents Part Number Index Options Marker Hydraulic Cylinder ( C) (Applies to CPH12 (1994+) only) Ref. Part No. Part Description Comments Revision dwg M6006 2M2320 3M2310 4M2102 5M2122 6M2132 7M2322 2A0208 2A0022 2A0012 2A0006 2A C Image No. MW ROD CLEVIS MW ROD F/ 2 X 14 DA CYLINDER HEAD RPBY 4M2108 MW TUBE F/ 2 X 14 DA CLINDER RPBY 6R0032 MW TIE ROD F/ 2 X 14 DA CYL RPBY C WIPERSEAL O-RING BACK-UP O-RING BACK-UP RPBY C RPBY C RPBY C COTTER PIN SEAL KIT MW 5A2104 Only Available in Seal Kit #18. Only Available in Seal Kit #18. Only Available in Seal Kit #18. Only Available in Seal Kit #18. Only Available in Seal Kit #18. 03/27/ P

60 Table of Contents Part Number Index Part Number Index The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page K K K D H H H H H H D D S D V D H H H D D D H H H H D D D H H...14, H H...14, H H H H...14, K H H...14, H...14, H...14, H D D D D D H S D D D H D D D D H H D H D D D D...11, D D D H H H E D D...23, D...23, D E S D K D D H D D M M , 31, 33, 35, 37, D...21, 23, S S D D S V V...23, D D D H D D D S H A , 31, 33, 35, 37, 39, 59 2A , 31, 33, 35, 37, 39, 59 2A , 31 2A , 35 2A A A A , 31, 33, 35, 37, 39 2A A A , 59 2M M M M , 35 2M M M R , 31 3R R R R M M R R R R R D D M M R R R R R M R , 31 6R R R R M M M M , 35 7M M C...9, 13, 23, 25, C C C C C C C C C C C C C...13, 17, C C C C...23, C C...13, C C...21, C...23, C C C C C C C C C...11, C...23, 25, C C C C C C C...11, C...14, C C C C C C C C C C C C...13, 19, 23, 25, C... 11, 13, 23, 25, 45, 47, 51, C C...9, 13, C...7, 13, 45, 49, C...21, 23, C C...7, 9, C...9, C...14, C C...23, C...13, 23, C C C C C...14, 27, C C C C C C...53, C... 9, 13, 19, 23, 25, 53, C C...9, 14, C...11, 14, C...13, C... 11, 13, 23, 25, 45, 47, 51, C...7, 13, 45, 49, C C C...7, 9, C C C...9, C C C...13, 23, C C...21, 23, C C C...9, C C C...13, C...23, C...9, C C C C C C C C C C C C C C C P /27/18

61 Table of Contents Part Number Index Part Number Index (continued) Part Number Page Part Number Page Part Number Page C C C C C C C...11, 23, 25, C C C C C C C C C C...14, C C C C C C C C C C C C C...9, C C C...53, C C C C C C...53, C...53, C C C C C C C C C C C C C C C C C C C C C C C...23, C C C C C C C C C...11 dwg C...11 dwg C...13 dwg C...13 dwg C...13 dwg C...25 dwg C...41 dwg C...41 dwg , C...19 dwg C...9, 41 dwg C...41 dwg C...53 dwg C...41 dwg C C C C C C C C...23, C...23, C C...23, C...23, C C C C C...21, C...21, 23, C C C C C C C C C C C C C C C C C C...19, C...19, C...19, C C C...9, C C C C C C C C C...19 dwg dwg dwg dwg , 33, 35, 37, 39 dwg dwg dwg dwg /27/ P

62 Great Plains Mfg., Inc E. North Street Salina, Kansas USA