Parts Manual. 2700, 3000 and 3700 Drills. Three-Point Drills. Copyright 2018 Printed 09/24/ P-A

Transcription

1 Table of Contents Part Number Index Parts Manual Three-Point Drills 2700, 3000 and 3700 Drills Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 09/24/ P-A

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Box and Frame...6 Box To Frame...6 Lid, Step, and Lights (Lights 2700 S/N 2061E-, 3000 S/N 1491S-)...8 Lights 2700 (S/N 2062E+), 3000 (S/N 1492S+), all Small Seeds Box Mounting...14 Small Seeds Box (Option)...16 Ladder...18 Gauge Wheels and Drives and 3000 Single Gauge Wheel Drive...20 Two Single Gauge Wheel Mounts with Drive...24 Dual Gauge Wheel...28 Jack Shaft Drive...30 Small Seeds Drive (Option)...32 Metering Feeder Cup Channel Feeder Cup Channel Feeder Cup Channel...42 Feeder Cup Divider...46 Small Seeds Metering (Option)...48 Loup Shaft Monitor (2 Channel A) (3 Channel A)...50 Openers...52 Option 00 Straight Arm Opener...52 Bedded Irrigation For Option 00 Opener " & 6" Seed Lok (Option) ( K & K)...56 Small Seeds Hose (Option)...58 Small Seeds Y-Tube Drop (Option)...60 Press Wheels " x 12" Double Press Wheel " x 13" Smooth Crown Press Wheel " x 13" V-Crown Press Wheel " x 14" Peaked Press Wheel "x 12" "V" Groove Press Wheel...70 Markers...72 Flat Fold Marker...72 Marker Disc Assembly ( S)...74 Flat Fold Marker Hydraulics...76 Midway Hydraulic Cylinder ( C)...78 Cross Hydraulic Cylinder ( C)...80 Decals...82 Decals 2700 (S/N 2061E-), 3000 (S/N 1491S-)...82 Decals 2700 (S/N 2062E+), 3000 (S/N 1492S+), all Part Number Index...86 Copyright 2018 All rights reserved Printed 09/24/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P-A /24/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 1 1" x 12" Double Press Wheel " x 13" Smooth Crown Press Wheel and 3000 Single Gauge Wheel Drive Feeder Cup Channel " x 13" V-Crown Press Wheel " x 14" Peaked Press Wheel Feeder Cup Channel Feeder Cup Channel...42 O Option 00 Straight Arm Opener...52 S Small Seeds Box (Option)...16 Small Seeds Box Mounting...14 Small Seeds Drive (Option)...32 Small Seeds Hose (Option)...58 Small Seeds Metering (Option)...48 Small Seeds Y-Tube Drop (Option)...60 T Two Single Gauge Wheel Mounts with Drive "x 12" "V" Groove Press Wheel " & 6" Seed Lok (Option) ( K & K)...56 B Bedded Irrigation For Option 00 Opener...54 Box To Frame...6 C Cross Hydraulic Cylinder ( C)...80 D Decals 2700 (S/N 2061E-), 3000 (S/N 1491S-)...82 Decals 2700 (S/N 2062E+), 3000 (S/N 1492S+), all Dual Gauge Wheel...28 F Feeder Cup Divider...46 Flat Fold Marker...72 Flat Fold Marker Hydraulics...76 J Jack Shaft Drive...30 L Ladder...18 Lid, Step, and Lights (Lights 2700 S/N 2061E-, 3000 S/N 1491S-)...8 Lights 2700 (S/N 2062E+), 3000 (S/N 1492S+), all Loup Shaft Monitor (2 Channel A) (3 Channel A)...50 M Marker Disc Assembly ( S)...74 Midway Hydraulic Cylinder ( C) /24/ P-A

4 Table of Contents P-A Part Number Index -4-09/24/18

5 Table of Contents Part Number Index 09/24/ P-A

6 Box To Frame Table of Contents Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

7 Box To Frame Table of Contents Part Number Index Box and Frame (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg H C C C C C C H H H C C C C C C C H H H C C D C C C C D C C C C C C C C B H H H H H D C P-A M-A Image No. 27' 3-PT FRAME WELDMENT PIN HAIR COTTER.243 WIRE PLT PIN HITCH 1 7/16 X 8 3/8 PLT PIN HITCH 1 1/4 X 4 1/2 U-BOLT 1/2-13 X 3 17/32 X4 1/2 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 30'-3PT BOX WELDMENT RH 27' 3 POINT BOX WELDMENT RH SEED BOX INNER RH-37' 3PT VINYL SEAL 3/8 X 5/8/FT VINYL SEAL 3/8 X 1/2 (PER FT) SCREW RD HD SLT 10-24X1/2 PLT SIGHT GLASS GASKET GRAIN LEVEL SIGHT GLASS WASHER INTERNAL STAR #10 PLT NUT HEX PLT 30'-3PT BOX WELDMENT LH 27' 3 POINT BOX WELDMENT LH SEED BOX INNER LH-37' 3PT HHCS 3/4-10X2 GR5 HHCS 3/4-10X1 1/2 GR5 BOX SPACER TUBE WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X2 3/4 GR5 HHCS 3/4-10X2 1/4 GR5 MANUAL PAK MOUNT HHCS 1/4-20X1 GR5 NUT HEX 3/8-16 PLT NUT HEX FLNG T-LOCK 1/4-20 PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 3 17/32 X4 1/4 MINI END WHEEL PRESS WHEEL MANUAL PAK 1" W/ GASKET DECAL GP PLANTING COMPONENTS 2700/3000/3700 SEED RATE BOOK FRAME EXTENSION LH-36' 3PT FRAME EXTENSION RH-36' 3PT SEED BOX EXTENSION LH-3700 SEED BOX EXTENSION RH ' 3-PT FRAME WELDMENT SIGHT GLASS RETAINER CORNER SIGHT GLASS 2700/3000/3700 Parts Manual 2700/3000/3700 Owner's Manual For Shown. For Shown. For Shown. For 3000 and For For For 3000 and Shown Shown For 3000 and 3700 For 3000 and For 3000 and /24/ P-A

8 Table of Contents Part Number Index Lid, Step, and Lights (Lights 2700 S/N 2061E-, 3000 S/N 1491S-) (Applies to 2700, 3000, 3700 only) P-A /24/18

9 Table of Contents Part Number Index Box and Frame Lid, Step, and Lights (Lights 2700 S/N 2061E-, 3000 S/N 1491S-) (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg H H C C C C C D C C C D D C C C C C C D D D D C C C D C C C C C H C C C C C C C C C H H C C C C C Image No. 14' BOX LID WELDMENT 3.5' BOX LID-3700 RUBBER LID LATCH NUT HEX 5/16-18 PLT NUT LOCK 1/4-20 PLT PIN CLVS.49X2.77 USBL PIN COTTER 5/32 X 1 PLT LID LATCH HHCS 5/16-18X3/4 GR5 NUT LOCK 5/16-18 PLT SPRING EXT LID HING LID HINGE STRAP SPACER LID LATCH STRAP HHCS 1/4-20X1 1/2 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT ANCHOR BRACKET SCREW RD HD 5/16-18 X 1/2 PLT WASHER LOCK SPRING 5/16 PLT STEP STEP WALKBOARD PLATFORM EXT-37' 3PT STEP ANGLE U-BOLT 1/2-13 X 2 X 3 GR 5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 3-PT STEP RETAINER HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT DUAL AG LIGHTS LH DUAL AG LIGHTS RH PT LIGHT MOUNT BRACKET SCR HEX SELF TAP 1/4-20X1TYPEF HHCS 1/2-13X1 1/4 GR5 LIGHT HARNESS, 5' LEAD LIGHT HARNESS, 20' WISHBONE CABLE TIE MOUNT CABLE TIE.19X DIA 50LB HHCS 1/2-13X3 1/2 GR5 PIN BENT.38X3.0 USBL W/PIN PIN HAIR COTTER.098 WIRE JACK STAND ASSEMBLY STAND TUBE ASSY - 30' 3PT U-BOLT 1/2-13 X 3 17/32 X4 3/4 NUT LOCK 1/2-13 PLT LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED LIGHT HARNESS, 5' LEAD - LED Shown. For Shown. For For (2700, S/N 1992E-) (3000, S/N 1442S-). Shown. (2700, S/N 1992E-) (3000, S/N 1442S-) (2700, S/N 1992E-) (3000, S/N 1442S-) (2700, S/N 1992E-) (3000, S/N 1442S-) (2700, S/N 1992E-) (3000, S/N 1442S-) (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) 09/24/ P-A

10 Table of Contents Part Number Index Lid, Step, and Lights (Lights 2700 S/N 2061E-, 3000 S/N 1491S-) (continued) (Applies to 2700, 3000, 3700 only) Ref Part No C C C C C D C C C C C C C Part Description LIGHT HARNESS 20' WISHBONE LED LIGHT HRNSS ENHANCE MODULE LED NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT 7-PIN CONNECTOR HOLDER 7-PIN HOLDER HHCS 1/4-20X3/4 GR5 HHCS 1/4-20X1 1/4 GR5 NUT HEX FLANGE 1/4-20 PLT U-BOLT 3/8-16 X 3 17/32 X4 1/4 SCREW HEX SELF TAP 1/4-20X3/4 PLASTIC HOLE PLUG 1/2 HARNESS EXT. 3' 2 PIN WP EXT. HARNESS 3', FAN RPM Comments (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) (2700, S/N 1993E+) (3000, S/N 1443S+) Used on 3700 only. Used on 3700 only. Revision P-A /24/18

11 Table of Contents Part Number Index Box and Frame Lid, Step, and Lights (Lights 2700 S/N 2061E-, 3000 S/N 1491S-) (continued) (Applies to 2700, 3000, 3700 only) This Page Intentionally Left Blank 09/24/ P-A

12 Table of Contents Part Number Index Lights 2700 (S/N 2062E+), 3000 (S/N 1492S+), all 3700 (Applies to 2700, 3000, 3700 only) P-A /24/18

13 Table of Contents Part Number Index Box and Frame Lights 2700 (S/N 2062E+), 3000 (S/N 1492S+), all 3700 (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg D C C C C C D C C C C D C C C C C C C C C C C C C C C Image No. 3PT LIGHT BRACKET LIGHT, AMBER LAMP LED SCREW HEX SELF TAP 1/4-20X3/4 HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 3PT RED LIGHT BRKT LIGHT, RED LAMP - LED U-BOLT 3/8-16 X 2 X 2 3/4 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 7-PIN HOLDER LIGHT HRNSS ENHANCE MODULE LED U-BOLT 3/8-16 X 3 17/32 X4 1/4 7-PIN CONNECTOR HOLDER HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 1/4-20X1 1/4 GR5 NUT HEX FLANGE 1/4-20 PLT ADHESIVE BACK CORD CLIP LIGHT HARNESS 6' WISHBONE LED LIGHT HARNESS, 5' LEAD - LED CABLE TIE.19X DIA 50LB HARNESS EXT. 10' 2 PIN WP HARNESS EXT. 15' 2 PIN WP PLASTIC HOLE PLUG 1/2 Used with Used with 3000 and /24/ P-A

14 Table of Contents Small Seeds Box Mounting Part Number Index (Applies to 2700, 3000 only) P-A /24/18

15 Table of Contents Part Number Index Box and Frame Small Seeds Box Mounting (Applies to 2700, 3000 only) Ref. Part No. Part Description Comments Revision dwg C C H C D H H C Image No. NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT 3-POINT GRASS BOX MOUNT BRKT HHCS 5/16-18X1 GR5 3 PT & EW MOUNT BACK PLATE 15 CENTER MOUNT BRACKET 14 CENTER MOUNT BRACKET WASHER FLAT 5/16 USS PLT For For /24/ P-A

16 Table of Contents Small Seeds Box (Option) Part Number Index (Applies to 2700, 3000 only) P-A /24/18

17 Table of Contents Part Number Index Box and Frame Small Seeds Box (Option) (Applies to 2700, 3000 only) Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H H H H H H C C C C C D C D C C C H H D D C C C C C C C C C Image No GRASS SEED BOX RH 6-81 GRASS SEED BOX LH GRASS SEED BOX RH GRASS SEED BOX LH 7 1/2-59 GRASS SEED BOX RH 7 1/2-59 GRASS SEED BOX LH 6-59 GRASS SEED BOX RH 6-59 GRASS SEED BOX LH 7 1/2-81 GRASS SEED BOX RH 7 1/2-81 GRASS SEED BOX LH 8-81 GRASS SEED BOX RH 8-81 GRASS SEED BOX LH GRASS SEED BOX RH GRASS SEED BOX LH NUT HEX 6-32 SS WASHER LOCK #6 SS LATCH FERT TRAY DOOR SCREW PAN HD 6-32 X 1/2 SS HFSS 1/4-20X1/2 GR5 SEED ADJUSTMENT SUPPORT SPRING EXT LID LATCH LID LOCK BAR NUT LOCK 1/4-20 PLT U-BOLT 1/4-20 X 15/16 X 1 PLT NUT HEX 1/4-20 PLT 59 SEED BOX LID WELDMENT 81 BOX LID WELDM'T PARTITION SMALL SEED BOX SEED BOX SPROCKET CAP WASHER FLAT #10 SAE PLT WASHER INTERNAL STAR #10 PLT NUT HEX PLT SCREW RD HD SLT 10-24X1/2 PLT DECAL GRASS SEEDER DRIVE TYPE DECAL GRASS SEEDER SEED RATE DECAL GS SEED RATE ADJUSTMENT DECAL GREAT PLAINS W/LOGO DECAL SMALL SEEDS DANGER 09/24/ P-A

18 Ladder Table of Contents Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

19 Ladder Table of Contents Part Number Index Box and Frame (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg C H D D H C C C C C C C C C D C C C Image No. DECAL WARNING FALLING HAZZARD LADDER MOUNT WELDMENT FERT LADDER BRACE PLATE STEP ANGLE LADDER WELDMENT HHCS 1/2-13X2 1/4 GR5 NUT LOCK 1/2-13 PLT HHCS 5/16-18X1 1/2 GR5 WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 3-PT STEP RETAINER U-BOLT 1/2-13 X 2 X 3 GR 5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 09/24/ P-A

20 Table of Contents Part Number Index 2700 and 3000 Single Gauge Wheel Drive (Applies to 2700, 3000 only) P-A /24/18

21 Table of Contents Part Number Index Gauge Wheels and Drives 2700 and 3000 Single Gauge Wheel Drive (Applies to 2700, 3000 only) Ref. Part No. Part Description Comments Revision dwg K K C C C C C C D S H H C C H C C D C C C C C C C C C C C E C D D C C C H H C E E H S H H C H H H H C C C C S C Image No. GAUGE WHEEL & TIRE - TUBELESS TIRE 9.5LX15ON6IN5BLT RIM BKSN TIRE 9.5 L X 15 8 PLY VALVE STEM TR415X.625X1 1/4 LG WHEEL 6 X 15 X 5 BOLT WHEEL 6X15X5 BLT BUCKSKIN NUT LUG 1/2-20X90DEG PLT 13/16 HUB STUD 1/2-20X1 5/8 GR5 G.W. AXLE HUB - MACHINED GAUGE WHEEL AXLE HUB W/STUDS LH GA WHL HANGER DRIVE END RH DRIVE GA WHL HANGER HHCS 1/2-13X3 GR5 NUT LOCK 1/2-13 PLT AXLE SHAFT WELDMENT SPKT 15 TEETH X 1 1/2 BORE PIN ROLL 5/16 X 2 1/4 PLT CHAIN RL 20-50A 37 PITCHES HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT U-BOLT 1/2-13 X 3 17/32 X4 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 5/8-11X2 GR5 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT BEARING SPEEDCHANGE 3/4 I.D. SPEED CHANGE WELDMENT NUT HEX JAM 5/8-11 PLT IDLER DISC IDLER ARM BAR NUT HEX NYLOCK 5/8-11 PLT HHCS 5/8-11X2 1/4 GR5 WASHER FLAT 5/8 SAE PLT GAUGE WHEEL MOUNT-SHORT LH GAUGE WHEEL MOUNT-SHORT RH NUT HEX JAM 1 1/4-7 PLT GAUGE WHEEL ADJ LINK UPPER GAUGE WHEEL CLEVIS LOWER GW CLEVIS WELDMENT G.W. ADJ LINK ASSY GAUGE WHEEL MOUNT-LONG LH GAUGE WHEEL MOUNT-LONG RH STEMCO ACREMETER GW DRIVE BRAKE MOUNT WELDMENT GW DRIVE BRAKE WELDMENT LOWER GUARD WELDMENT-LH LOWER GUARD WELDMENT-RH U-BOLT 3/8-16 X 3 1/32 X 4 HHCS 1/2-13X1 1/2 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT SPEEDCHANGE HUB 3/4 I.D. BEARING GAUGE WHEEL Includes items 2, 3 & 4 (2700 S/N 2047E-)( S-) (2700 S/N 2048E+)( S+) (2700 S/N 2047E-)( S-) (2700 S/N 2048E+)( S+) Includes items 6 & 7. Shown. For single gauge wheel Shown. Includes items 35 through 38 Shown. Shown. Includes items 26 & 27 09/24/ P-A

22 Table of Contents Part Number Index 2700 and 3000 Single Gauge Wheel Drive (continued) (Applies to 2700, 3000 only) Ref. 5 Part No C Part Description DECAL CAUTION TIRE 44 PSI/85 Comments Revision P-A /24/18

23 Table of Contents Part Number Index Gauge Wheels and Drives 2700 and 3000 Single Gauge Wheel Drive (continued) (Applies to 2700, 3000 only) This Page Intentionally Left Blank 09/24/ P-A

24 Table of Contents Part Number Index Two Single Gauge Wheel Mounts with Drive (Applies to 3700 only) P-A /24/18

25 Table of Contents Part Number Index Gauge Wheels and Drives Two Single Gauge Wheel Mounts with Drive (Applies to 3700 only) Ref. Part No. Part Description Comments Revision dwg C C C K H H H H D C C C C C C C S C C C C H H H C D C S C C C K K H H C C E S D C C D C D C C D H H C C C K K Image No. TIRE 9.5 L X 15 8 PLY WHEEL 6X15X5 BLT BUCKSKIN VALVE STEM TR415X.625X1 1/4 LG TIRE 9.5LX15ON6IN5BLT RIM BKSN GAUGE WHEEL MOUNT-LONG RH GAUGE WHEEL MOUNT-LONG LH GAUGE WHEEL MOUNT-SHORT LH GAUGE WHEEL MOUNT-SHORT RH MOUNT CHANNEL HHCS 5/8-11X5 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT G.W. ADJ LINK ASSY HHCS 5/8-11X2 GR5 NUT HEX NYLOCK 5/8-11 PLT HHCS 5/8-11X2 1/4 GR5 WASHER FLAT 5/8 SAE PLT RH DRIVE GA WHL HANGER LH GA WHL HANGER DRIVE END AXLE SHAFT WELDMENT BRG GAUGE WHEEL G.W. AXLE HUB - MACHINED HUB STUD 1/2-20X1 5/8 GR5 GAUGE WHEEL AXLE HUB W/STUDS NUT LUG 1/2-20X90DEG PLT 13/16 HHCS 1/2-13X3 GR5 NUT LOCK 1/2-13 PLT 3PT RH GAUGE WHEEL NON-DRIVE 3PT LH GAUGE WHEEL NON-DRIVE GW DRIVE BRAKE WELDMENT GW DRIVE BRAKE MOUNT WELDMENT HHCS 1/2-13X1 1/2 GR5 BRG.75ID SPEED CHANGE SPEED CHANGE WELDMENT SPEEDCHANGE HUB 3/4 I.D. SPEED CHANGE HUB SPACER WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT IDLER ARM BAR NUT HEX JAM 5/8-11 PLT IDLER DISC SPKT 15 TEETH X 1 1/2 BORE PIN ROLL 5/16 X 2 1/4 PLT CHAIN RL 20-50A 37 PITCHES LOWER GUARD WELDMENT-RH LOWER GUARD WELDMENT-LH U-BOLT 3/8-16 X 3 1/32 X 4 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 3PT RH GAUGE WHEEL ASSEMBLY 3PT LH GAUGE WHEEL ASSEMBLY Includes items 1-3. Shown. Shown. Refer to 2700 and 3000 Single Gauge Wheel Drive for breakdown. Shown. Includes items 23 & 24. Shown. Includes items Includes items 33 & 34. Shown. Shown. Includes items 5-22, 25-28, & /24/ P-A

26 Table of Contents Part Number Index Two Single Gauge Wheel Mounts with Drive (continued) (Applies to 3700 only) Ref Part No C C Part Description STEMCO ACREMETER DECAL CAUTION TIRE 44 PSI/85 Comments Revision P-A /24/18

27 Table of Contents Part Number Index Gauge Wheels and Drives Two Single Gauge Wheel Mounts with Drive (continued) (Applies to 3700 only) This Page Intentionally Left Blank 09/24/ P-A

28 Table of Contents Dual Gauge Wheel Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

29 Table of Contents Part Number Index Gauge Wheels and Drives Dual Gauge Wheel (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg C C C K L L C H H H C H C C H H C C C C C D C C C D D C S C C D C C D S H H H H C C C C H H C S C C C C C C C Image No. WHEEL 6X15X5 BLT BUCKSKIN TIRE 9.5 L X 15 8 PLY VALVE STEM TR415X.625X1 1/4 LG TIRE 9.5LX15ON6IN5BLT RIM BKSN 3PT RH DUAL GAUGE WHEEL ASSY 3PT LH DUAL GAUGE WHEEL ASSY NUT LUG 1/2-20X90DEG PLT 13/16 DUAL GW HUB WELDMENT LOWER GUARD WELDMENT-LH LOWER GUARD WELDMENT-RH BRG GAUGE WHEEL 3-PT DUAL GA WHL AXLE SHAFT HHCS 1/2-13X2 3/4 GR5 NUT LOCK 1/2-13 PLT LH GA WHL HANGER DRIVE END RH DRIVE GA WHL HANGER HHCS 1/2-13X3 GR5 U-BOLT 3/8-16 X 3 1/32 X 4 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT NUT HEX JAM 5/8-11 PLT IDLER ARM BAR WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 5/8-11X2 GR5 IDLER DISC G.W. AXLE HUB - MACHINED HUB STUD 1/2-20X1 5/8 GR5 GAUGE WHEEL AXLE HUB W/STUDS SPKT 15 TEETH X 1 1/2 BORE PIN ROLL 5/16 X 2 1/4 PLT CHAIN RL 20-50A 37 PITCHES NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT SPEED CHANGE HUB SPACER SPEEDCHANGE HUB 3/4 I.D. GAUGE WHEEL MOUNT-LONG LH GAUGE WHEEL MOUNT-LONG RH GAUGE WHEEL MOUNT-SHORT LH GAUGE WHEEL MOUNT-SHORT RH HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT GW DRIVE BRAKE WELDMENT GW DRIVE BRAKE MOUNT WELDMENT HHCS 1/2-13X1 1/2 GR5 G.W. ADJ LINK ASSY NUT HEX NYLOCK 5/8-11 PLT HHCS 5/8-11X2 1/4 GR5 WASHER FLAT 5/8 SAE PLT 27' 3PT ACRE METER 30' ACRE METER 3700 ACRE METER DECAL CAUTION TIRE 44 PSI/85 Includes items 1-3. Includes items Lower left illustration. Includes items Top illustration. Shown. Shown. Includes items 24 & 25. Shown. Shown. Refer to 2700 and 3000 Single Gauge Wheel Drive for breakdown. Used with 27'. Used with 30'. Used with 37'. 09/24/ P-A

30 Jack Shaft Drive Table of Contents Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

31 Jack Shaft Drive Table of Contents Part Number Index Gauge Wheels and Drives (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg D D C D C C C C C D D C C C C C D D C D D C C C C C D C C Image No. JACKSHAFT BEARING BRACKET RH JACKSHAFT BEARING BRACKET LH BEARING JACK SHAFT NG JACKSHAFT 34 1/2 LG NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT U-BOLT 1/2-13 X 3 17/32 X4 1/2 SPKT 50B15 X 1 BORE PIN ROLL 5/16 X 2 1/4 PLT CHAIN RL 20-50A 50 PITCHES JACK SHAFT - KEY HHCS 5/16-18X1 1/2 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT SPKT 50B39 X 1 BORE SPKT 50B19 X 1 BORE CHAIN RL #20-50A 45 PITCHES IDLER ARM BAR HHCS 5/8-11X2 3/4 GR5 IDLER SPACER TUBE IDLER DISC WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 1/2-13X2 GR5 WASHER FLAT 1/2 SAE PLT SCREW SET 5/16-18 SKT KP X 3/8 IDLER BAR SPACER GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 1/2 GR5 09/24/ P-A

32 Table of Contents Small Seeds Drive (Option) Part Number Index (Applies to 2700, 3000 only) P-A /24/18

33 Table of Contents Part Number Index Gauge Wheels and Drives Small Seeds Drive (Option) (Applies to 2700, 3000 only) Ref. Part No. Part Description Comments Revision dwg D D C C C D C C C H C C H D D D C C C C C D D C D C C C D D D C D H C C C C D C C C S Image No. DRIVE MOUNT BRACE TYPE B DRIVE MOUNT BRACE TYPE A HHCS 5/16-18X3/4 GR5 HHCS 1/2-13X5 1/2 GR5 WASHER LOCK SPRING 5/16 PLT GRASS SEEDER DRIVE INDICATOR FLANGETTE 47 MST NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT CHAIN IDLER BRACKET HHCS 1/2-13X1 1/4 GR5 WASHER FLAT 1/2 SAE PLT GRASS SEED DRIVE CHANGE SHAFT DRIVE BRACKET SPACER TUBE 3-POINT TYPE B DRIVE BRACE 3-POINT TYPE A DRIVE BRACE BRG INS.75IDX85OD SPH LCK NUT HEX JAM 1/2-13 PLT NO T IDLER SPKT. HHCS 1/2-13X2 3/4 GR5 NUT HEX 5/16-18 PLT CHAIN RL #40 36 PITCHES 3/16 X 1 KEY SPKT 40B10 X 3/4 BORE CHAIN RL #40 75 PITCHES 2 IN. WIDE RED REFLECTOR TAPE HHCS 5/16-18X1 1/2 GR5 BRG FLG 00ID 2BOLT JACKSHAFT BEARING BRACKET RH JACKSHAFT BEARING BRACKET LH SHEAR SPROCKET HUB SCREW SET SH 1/4-20 X 1/4 LG. KEY 1/4 X 1 DRIVE SPROCKET ASSEMBLY WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PIN COTTER 3/32 X 2 PLT SNAP RING EXT 1 1/2 SHAFT 27' & 30' GRASS SDR JACKSHAFT WASHER FLAT 5/16 USS PLT U-BOLT 1/2-13 X 3 17/32 X4 3/4 U-BOLT 3/8-16 X 3 17/32 X4 1/4 SHEAR SPROCKET ASSEMBLY Includes items 28, 29, 31, 34 & /24/ P-A

34 Table of Contents 2700 Feeder Cup Channel Part Number Index (Applies to 2700 only) P-A /24/18

35 Table of Contents Part Number Index Metering 2700 Feeder Cup Channel (Applies to 2700 only) Ref. Part No. Part Description Comments Revision dwg H D C C C C C C C C H C D C C C C C C C C H C C D C C S D C C C C C C C C C D D D D D D D D D D D D D D D D C C D Image No. SEED RATE ADJ HANDLE FRONT ADJUSTMENT HANDLE PIVOT WASHER FLAT 5/8 USS PLT PIN COTTER 3/16 X 1 1/4 PLT HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT WASHER ADJ HANDLE BRG BRG BALL 17IDX40OD 6203 SNAP RING EXT 17 MM ADJ LOCK PLATE ASS'Y - 1 1/2 W NUT WING 1/2-13 PLT SEED RATE GAUGE MOUNT NAME PLATE ADJ. GUIDE SHORT SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS U-BOLT 1/2-13 X 3 17/32 X4 3/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 39T SPROCKET & HUB ASSEMBLY BRG BALL 30IDX62OD 206 RING FC HOUSING FEEDER CUP BRG HOUSING GREASE ZERK STRAIGHT 1/4-28 SNAP RING EXT BASIC 1 3/16 GRAIN 39T SPRKT HUB & BRG ASSY MACHINED ADJUSTMENT SPOOL PIN ROLL 3/16X1 1/4 PLT HHCS 1/2-13X3/4 GR5 PIN ROLL.182 X 1 5/32 FDR CUP POWDER METAL SPROCKET D2861B SEED CUP ASSEMBLY-1 1/4 HHCS 1/4-20X3/4 GR5 DELRIN SLEEVE WASHER RETAINING HFSS 1/4-20X5/8 GR5 14' LH 6 ADJ SPROCKET SHAFT 14' 6 ADJ SPROCKET SHAFT RH 14' LH 7 1/2 ADJ SPROCKET SHFT 14' RH 7 1/2 ADJ SPROCKET SHFT 27'-8 ADJUSTMENT SPKT SHAFT LH 14' RH 8 ADJUSTMENT SPKT SHAFT 27'-10 ADJUSTMENT SPKT SHFT LH 14' RH 10 ADJUSTMENT SPKT SHFT 14' LH 6 FEEDER CUP CHANNEL 14' LH 7 1/2 FEEDER CUP CHNL 27' LH 8 FEEDER CUP CHANNEL 27' LH 10 FEEDER CUP CHANNEL 14' RH 6 FEEDER CUP CHANNEL 14' RH 7 1/2 FEEDER CUP CHNL 14' RH 8 FEEDER CUP CHANNEL 14' RH 10 FEEDER CUP CHANNEL NUT HEX WHIZ 1/4-20 PLT 1 1/4 WIDE FEEDER CUP PLUG FEEDER CUP DIVIDER CLIP Includes items 20, 22, 27, 31 & 5 Includes items Optional 09/24/ P-A

36 Table of Contents 2700 Feeder Cup Channel (continued) Part Number Index (Applies to 2700 only) Ref Part No C C C C C C C V Part Description SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER SEED CUP LEFT HALF SEED CUP DOOR SEED CUP RIGHT HALF SEED CUP ADJUSTMENT HANDLE FEED CUP BRG ASSEMBLY Comments Includes items 23, 24, 25 & 26. Revision P-A /24/18

37 Table of Contents Part Number Index Metering 2700 Feeder Cup Channel (continued) (Applies to 2700 only) This Page Intentionally Left Blank 09/24/ P-A

38 Table of Contents 3000 Feeder Cup Channel Part Number Index (Applies to 3000 only) P-A /24/18

39 Table of Contents Part Number Index Metering 3000 Feeder Cup Channel (Applies to 3000 only) Ref. Part No. Part Description Comments Revision dwg H D C C C C C C C C H C D C C C C C C C C H C C D C C S D C C C C C C C C C D D D D D D D D D D D D D D D D C C D Image No. SEED RATE ADJ HANDLE FRONT ADJUSTMENT HANDLE PIVOT WASHER FLAT 5/8 USS PLT PIN COTTER 3/16 X 1 1/4 PLT HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT WASHER ADJ HANDLE BRG BEARING ADJ HANDLE RS SNAP RING EXT 17 MM ADJ LOCK PLATE ASS'Y - 1 1/2 W NUT WING 1/2-13 PLT SEED RATE GAUGE MOUNT NAME PLATE ADJ. GUIDE SHORT SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS U-BOLT 1/2-13 X 3 17/32 X4 1/2 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 39T SPROCKET & HUB ASSEMBLY BEARING 206 RING FC HOUSING FEEDER CUP BRG HOUSING GREASE ZERK STRAIGHT 1/4-28 SNAP RING EXT BASIC 880 GRAIN 39T SPRKT HUB & BRG ASSY MACHINED ADJUSTMENT SPOOL PIN ROLL 3/16X1 1/4 PLT HHCS 1/2-13X3/4 GR5 PIN ROLL.182 X 1 5/32 FDR CUP POWDER METAL SPROCKET D2861B SEED CUP ASSEMBLY-1 1/4 HHCS 1/4-20X3/4 GR5 DELRIN SLEEVE WASHER RETAINING HFSS 1/4-20X5/8 GR5 15'-6 LH FEEDER CUP SHAFT 15'-6 RH FEEDER CUP SHAFT 15'-7 1/2 LH FEEDER CUP SHAFT 15'-7 1/2 RH FEEDER CHP SHAFT 15'-8 LH FEEDER CUP SHAFT 15'-8 RH FEEDER CUP SHAFT 15'-10 LH FEEDER CUP SHAFT 15'-10 RH FEEDER CUP SHAFT 15' LH 6 FEEDER CUP CHANNEL 15' RH 6 FEEDER CUP CHANNEL 15' LH 7 1/2 FEEDER CUP CHNL 15' RH 7 1/2 FEEDER CUP CHNL 15' LH 8 FEEDER CUP CHANNEL 15' RH 8 FEEDER CUP CHANNEL 15' LH 10 FEEDER CUP CHANNEL 15' RH 10 FEEDER CUP CHANNEL NUT HEX WHIZ 1/4-20 PLT 1 1/4 WIDE FEEDER CUP PLUG FEEDER CUP DIVIDER CLIP Includes 20, 22, 27, 31, 51 Includes items Optional 09/24/ P-A

40 Table of Contents 3000 Feeder Cup Channel (continued) Part Number Index (Applies to 3000 only) Ref Part No C C C C C C C V Part Description SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER SEED CUP LEFT HALF SEED CUP DOOR SEED CUP RIGHT HALF SEED CUP ADJUSTMENT HANDLE FEED CUP BRG ASSEMBLY Comments Includes Revision P-A /24/18

41 Table of Contents Part Number Index Metering 3000 Feeder Cup Channel (continued) (Applies to 3000 only) This Page Intentionally Left Blank 09/24/ P-A

42 Table of Contents 3700 Feeder Cup Channel Part Number Index (Applies to 3700 only) P-A /24/18

43 Table of Contents Part Number Index Metering 3700 Feeder Cup Channel (Applies to 3700 only) Ref. Part No. Part Description Comments Revision dwg H D C C C C C C C C H C D C C C C C C C C H C C D C C S D C C C C C C C C C D D D D D D D D D D D D D D C C D C C Image No. SEED RATE ADJ HANDLE FRONT ADJUSTMENT HANDLE PIVOT WASHER FLAT 5/8 USS PLT PIN COTTER 3/16 X 1 1/4 PLT HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT WASHER ADJ HANDLE BRG BEARING ADJ HANDLE RS SNAP RING EXT 17 MM ADJ LOCK PLATE ASS'Y - 1 1/2 W NUT WING 1/2-13 PLT SEED RATE GAUGE MOUNT NAME PLATE ADJ. GUIDE SHORT SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS U-BOLT 1/2-13 X 3 17/32 X4 1/2 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 39T SPROCKET & HUB ASSEMBLY BEARING 206 RING FC HOUSING FEEDER CUP BRG HOUSING GREASE ZERK STRAIGHT 1/4-28 SNAP RING EXT BASIC 880 GRAIN 39T SPRKT HUB & BRG ASSY MACHINED ADJUSTMENT SPOOL PIN ROLL 3/16X1 1/4 PLT HHCS 1/2-13X3/4 GR5 PIN ROLL.182 X 1 5/32 FDR CUP POWDER METAL SPROCKET D2861B SEED CUP ASSEMBLY-1 1/4 HHCS 1/4-20X3/4 GR5 DELRIN SLEEVE WASHER RETAINING HFSS 1/4-20X5/8 GR5 3.5'-6" LH FEEDER CUP SHAFT 3.5'-6" RH FEEDER CUP SHAFT 3.5'-7.5" LH FEEDER CUP SHAFT 3.5'-7.5" RH FEEDER CUP SHAFT 3.5'-8" RH FEEDER CUP SHAFT 3.5'-10" LH FEEDER CUP SHAFT 3.5'-10" RH FEEDER CUP SHAFT 3.5'-6" LH FEEDER CUP CHANNEL 3.5'-6" RH FEEDER CUP CHANNEL 3.5'-7.5"LH FEEDER CUP CHANNEL 3.5'-7.5"RH FEEDER CUP CHANNEL 3.5'-8" RH FEEDER CUP CHANNEL 3.5'-10" LH FEEDER CUP CHANNEL 3.5'-10" RH FEEDER CUP CHANNEL NUT HEX WHIZ 1/4-20 PLT 1 1/4 WIDE FEEDER CUP PLUG FEEDER CUP DIVIDER CLIP SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT Includes items 20, 22, 27, 31, 51 Includes items Used on 7.5" and 8" spacing. Used on both 7.5" and 8" spacing. Optional 09/24/ P-A

44 Table of Contents 3700 Feeder Cup Channel (continued) Part Number Index (Applies to 3700 only) Ref Part No C C C C C V D D D D D D D D D D D D D D D D D Part Description SEED CUP WASHER RETAINER SEED CUP LEFT HALF SEED CUP DOOR SEED CUP RIGHT HALF SEED CUP ADJUSTMENT HANDLE FEED CUP BRG ASSEMBLY COUPLING 5/8 SQ. 15'-6 LH FEEDER CUP SHAFT 15'-6 RH FEEDER CUP SHAFT 15'-7 1/2 LH FEEDER CUP SHAFT 15'-7 1/2 RH FEEDER CHP SHAFT 15'-8 LH FEEDER CUP SHAFT 15'-8 RH FEEDER CUP SHAFT 15'-10 LH FEEDER CUP SHAFT 15'-10 RH FEEDER CUP SHAFT 15' LH 6 FEEDER CUP CHANNEL 15' RH 6 FEEDER CUP CHANNEL 15' LH 7 1/2 FEEDER CUP CHNL 15' RH 7 1/2 FEEDER CUP CHNL 15' LH 8 FEEDER CUP CHANNEL 15' RH 8 FEEDER CUP CHANNEL 15' LH 10 FEEDER CUP CHANNEL 15' RH 10 FEEDER CUP CHANNEL Comments Includes items Revision P-A /24/18

45 Table of Contents Part Number Index Metering 3700 Feeder Cup Channel (continued) (Applies to 3700 only) This Page Intentionally Left Blank 09/24/ P-A

46 Table of Contents Feeder Cup Divider Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

47 Table of Contents Part Number Index Metering Feeder Cup Divider (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg C D D D D D C C Image No. HHCS 1/4-20X3/4 GR5 FEEDER CUP DIVIDER CLIP FEEDER CUP DIVIDER 6 S.S. BOX FEEDER CUP DIVIDER 7.5 SS BOX FEEDER CUP DIVIDER 8 S.S. BOX FEEDER CUP DIVIDER 10 S.S. BOX NUT HEX WHIZ 1/4-20 PLT SILICON 35YR CLEAR 10 OZ Not shown. 09/24/ P-A

48 Table of Contents Small Seeds Metering (Option) Part Number Index (Applies to 2700, 3000 only) P-A /24/18

49 Table of Contents Part Number Index Metering Small Seeds Metering (Option) (Applies to 2700, 3000 only) Ref. Part No. Part Description Comments Revision dwg C C D C C C C C C C C C E C H C D C D D D D D D D D C C C H C D C C D C C C S Image No. HHCS 1/4-20X5/8 GR5 NUT-HEX 1/4-20 PLT SEED BOX SPROCKET CAP WASHER GRASS SEEDER CUP SHAFT GRASS SEEDER SLEEVE PIN COTTER 1/8 X 3/4 GRASS SEEDER SPROCKET RPBY C SNAP RING.875 WASHER FLAT 1 3/8X.876X.048 TH WASHER LOCK SPRING 1/4 PLT HANGER DRIVE SHAFT DRIVE SPROCKET SEED CUP PIN COTTER 5/32 X 1 PLT ADJUSTMENT HANDLE PIVOT 3/8 SHAFT LOCKING COLLAR SEED ADJUSTMENT SPOOL SCREW SET 5/16-18 SKT KP X 3/ SEED CUP SHAFT 7-1/2-81 SEED CUP SHAFT 8-81 SEED CUP SHAFT SEED CUP SHAFT SEED CUP SHAFT 7-1/2-59 SEED CUP SHAFT 6-59 SEED CUP SHAFT GRASS SEEDER SHAFT COUPLER SCR,HEX,SCKT. 5/16-24 X 5/16 WASHER FLAT 3/8 SAE PLT NUT WING 5/16-18 ADJUSTMENT HANDLE WELDMENT RHSNB 5/16-18X1 GR5 LOCK TAB SCREW RD HD 8-32 X 3/8 BRASS NAME PLATE ADJ. GUIDE SHORT GAUGE MOUNTING BRACKET WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS DRIVE SPROCKET ASSEMBLY For For For For For For For Includes items 9, 10, 12 & /24/ P-A

50 Table of Contents Part Number Index Loup Shaft Monitor (2 Channel A) (3 Channel A) (Applies to 2700, 3000, 3700 only) P-A /24/18

51 Table of Contents Part Number Index Metering Loup Shaft Monitor (2 Channel A) (3 Channel A) (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg C C C D C D C C Image No. HFSS 1/4-20X3/4 GR5 HOSE CLIP 5/8 I.D. NUT HEX LOCK 1/4-20 FLG CABLE TIE, NYLON MAGNET, ADHESIVE BACKED, LARGE NUT HEX JAM, PLASTIC M16 X 2 SHAFT SENSOR MOUNT SCR SELF TAP #10 X 3/4 LOUP SHAFT SENSOR 2&3 CHANNEL SMALL CUP SENSOR MOUNT LOUP 2 CHANNEL SHAFT MONITOR LOUP 3 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 30' 6P WP HARNESS 3 SHAFT MONITOR LOUP HARNESS 2 SHAFT MONITOR LOUP SHAFT MONITOR EXT. 25' 4P WP 09/24/ P-A

52 Table of Contents Option 00 Straight Arm Opener Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

53 Table of Contents Part Number Index Openers Option 00 Straight Arm Opener (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg C C C D D A D C C C C D C C H D C C C C V C C S D C C D C D C C C C C C C C C C C H C A C D S Image No. U-BOLT 3/8-16 X 2 X 2 3/4 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT SPRING ROD CASTING CLIP CASTING DOUBLE SPRING ROD SPRING CASTING MTG ASS'Y STRAIGHT ARM OPENER SPRING ROD HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT SPRING COMP 13/16IDX.156WX19.5 DISC SPRING BAR WIRE CLIP CLAMP HOSE 1 5/8 NO. 26 SEED HOSE 30 RIBS X 7 1/2 LG OPENER WELDMENT - SHORT 94 STRAIGHT ARM OPENER MOUNT RHSNB 1/2-13X5 1/2 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. U-BOLT 1/2-13 X 3 1/32 X 4 FLAT DISK BLADE-4MM THICK BRG AA205DD RIBB BRG FLNG.266 MT HOLE PLT RIVET,BUTTON HEAD 1/4 X 9/16 DD W/205 BRG-PLD FLNG-4MM DD BRG FLANGE DUST COVER HHCS 5/8-11X1 1/2 GR5 NYL WASHER FLAT 3/8 SAE PLT D.D. SLOTTED SCRAPER CLAMP HOSE 1 1/2 NO. 24 STRAIGHT ARM OPENER PIVOT PIPE HFS 3/8-16X3 5/8 SPTHD NUT FLANGE LOCK 3/8-16 PLT PARALLEL ARM PIVOT BUSHING WASHER MACH 00 X.625 X 18GA RHSNB 3/8-16X1 GR5 OPENER SEED TUBE, PLASTIC SCREW HEX SLT10-16X3/8P.THD CT NUT HEX WHIZ 1/2-13 PLT NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 SAE PLT 10 1/2 DEPTH BAND WLMT RHSNB 5/16-18X3/4 GR5 10 1/2 DEPTH BAND BUNDLE SEED FLAP, RUBBER, SEED-LOK HEX SEED FLAP MOUNTING CLIP SEED FLAP&CLIP, RUBBER,SEEDLOK Includes items 1-5. For drills manufactured before 5/1/2000. Also order part no S. Includes items Includes items (2700 S/N 1553E-, 3000 S/N 1255S-) Includes items 45 & /24/ P-A

54 Table of Contents Part Number Index Bedded Irrigation For Option 00 Opener (Applies to 2700, 3000, 3700 only) P-A /24/18

55 Table of Contents Part Number Index Openers Bedded Irrigation For Option 00 Opener (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg H H C C C C C C D D D C C C C D D C C C C C D Image No. FRONT MOUNT DROP BRACKET WMNT REAR BEDDED MOUNT U-BOLT 1/2-13X3 1/32X4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT RHSNB 1/2-13X5 1/2 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. PARALLEL ARM PIVOT BUSHING STRAIGHT ARM OPENER PIVOT PIPE DISC SPRING BAR WIRE CLIP BEDDED IRRI. SPRING ROD SPRING COMP 13/16IDX.156WX19.5 HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT OS SPRING RD CLIP LH EXTND 1/2 CASTING DOUBLE SPRING ROD U-BOLT 3/8-16 X 2 X 2 3/4 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT NUT FLANGE LOCK 3/8-16 PLT HFS 3/8-16X3 3/4 SPTHD OS SPRING RD CLIP RH EXTND 1/2 Rev. 2 is not interchangeable w/rev. Rev. 2 is not interchangeable w/rev. 09/24/ P-A

56 Table of Contents Part Number Index 5" & 6" Seed Lok (Option) ( K & K) (Applies to 2700, 3000, 3700 only) P-A /24/18

57 Table of Contents Part Number Index Openers 5" & 6" Seed Lok (Option) ( K & K) (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg D C C S S C D H C C C C C C V C C C C C Image No. SEED-LOK ARM (1994) WASHER INTERNAL STAR 3/8 PLT. LHS CP 3/8-16X3/4 GR8 PLATED SD-LK 203 BEARING WHEEL ASSY 6 SEED LOK ASSEMBLY RING SNAP EXTERNAL '"E'" 1/2 5 SEED-LOK WHL ARM PIVOT PIN SS RMVBL SD-LOK MNT WLDMT SPRING, 1 O.D.X.125WIREX 3 1/2 WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 GR5 5/8 X 5 SEED FIRMING WHEEL 5/8 X 6 SEED LOK WHEEL BRG 203 SEED-LOK WITH PIN RETAINER W/BONDED SEAL 4BLT SCR PH THD FMG #10X1/2 TP ZP SEED LOK TIE UP WASHER FLAT 3/8 SAE PLT SEED LOK HANGER SPRING 5" Seed-Lok. Contains items " Seed-Lok. Contains items " Seed-Lok 6" Seed-Lok 09/24/ P-A

58 Table of Contents Small Seeds Hose (Option) Part Number Index (Applies to 2700, 3000 only) P-A /24/18

59 Table of Contents Part Number Index Openers Small Seeds Hose (Option) (Applies to 2700, 3000 only) Ref. Part No. Part Description Comments Revision dwg C C C D C D H Image No. PLASTIC FERTILIZER TUBE SCREW HEX SLT10-16X1/2P.THD CT SGS TUBE CLAMP GRASS SEED HOSE, 60IN. SINGLE WIRE HOSE CLAMP #14 SML SDS TB REINFORCEMENT RING SMALL SEEDS TUBE WELDMENT 09/24/ P-A

60 Table of Contents Small Seeds Y-Tube Drop (Option) Part Number Index (Applies to 2700, 3000 only) P-A /24/18

61 Table of Contents Part Number Index Openers Small Seeds Y-Tube Drop (Option) (Applies to 2700, 3000 only) Ref. Part No. Part Description Comments Revision dwg C C C D C Image No. GRASS SEED DROP TUBE SGS DROP TUBE CONNECTING HOSE CLAMP HOSE 1 5/8 NO. 26 SML SDS HOSE 5/8 ID X 36LONG SINGLE WIRE HOSE CLAMP #14 09/24/ P-A

62 Table of Contents 1" x 12" Double Press Wheel Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

63 Table of Contents Part Number Index Press Wheels 1" x 12" Double Press Wheel (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C H C D C C C C C C C S Image No. HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT HHCS 1/4-20X1 GR5 1 X 12 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY TIRE RUBBER 1 X 12 NUT HEX LOCK 1/4-20 FLG 1 X 12 PRESS WHL ASSY-5203BRG 98 1X12 PRESS WHEEL WELDMENT PARALLEL ARM PIVOT BUSHING PRESS WHEEL PIVOT TUBE PIN CLEVIS 3/8 X 2 1/8 USABLE SPRING.540 O.D.X 1 1/4 X.054W OPENER TRUNION HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT PW ADJUSTMENT TRUNNION ASSY Includes items 3 through 7. Includes items 12, 13, 14, 17 & /24/ P-A

64 Table of Contents 2" x 13" Smooth Crown Press Wheel Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

65 Table of Contents Part Number Index Press Wheels 2" x 13" Smooth Crown Press Wheel (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D C D C C C C C C C S Image No. HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX LOCK 1/4-20 FLG 2 X 13 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY 2 X 13 PRESS WHEEL TIRE HHFS 1/4-20 X 1 1/2 GR 5 2 X 13 PRESS WHEEL ASSEMBLY UNIVERSAL PW ARM MACH 2&3X13 PARALLEL ARM PIVOT BUSHING PRESS WHEEL PIVOT TUBE PIN CLEVIS 3/8 X 2 1/8 USABLE SPRING.540 O.D.X 1 1/4 X.054W OPENER TRUNION HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT PW ADJUSTMENT TRUNNION ASSY Includes items 3 through 7. Includes items 12, 13, 14, 17 & /24/ P-A

66 Table of Contents 3" x 13" V-Crown Press Wheel Part Number Index (Applies to 2700, 3000, 3700 only) P-A /24/18

67 Table of Contents Part Number Index Press Wheels 3" x 13" V-Crown Press Wheel (Applies to 2700, 3000, 3700 only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D C D C C C C C C C S Image No. HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX LOCK 1/4-20 FLG 3 X 13 PRESS WHEEL RIM HALF 3 X 13 PRESS WHEEL TIRE BRG.63ID PRESS WHL ASY HHFS 1/4-20 X 2 GR 5 3 X 13 PRESS WHEEL ASSEMBLY UNIVERSAL PW ARM MACH 2&3X13 PARALLEL ARM PIVOT BUSHING PRESS WHEEL PIVOT TUBE PIN CLEVIS 3/8 X 2 1/8 USABLE SPRING.540 O.D.X 1 1/4 X.054W OPENER TRUNION HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT PW ADJUSTMENT TRUNNION ASSY Includes items 3 through 7. Includes items 12, 13, 14, 17 & /24/ P-A