Parts Manual. Air Drill Cart ADC2350 & ADC2350B. Copyright 2018 Printed 10/02/ P

Transcription

1 Table of Contents Part Number Index Parts Manual ADC2350 & ADC2350B Air Drill Cart Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 10/02/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frame And Bins...6 Tongue to Frame Pull Behind Air Cart...6 Tongue To Frame Pull Between Air Cart...8 Tongue Pull Behind Air Cart...10 Tongue Pull Between Air Cart...12 Rotating Square Hammerblow Jack ( C)...14 Bin To frame...16 Bin Assembly...18 Handrail And Step...20 Hub And Wheel...22 Rear Hitch...24 Rear Hitch Pull Between Cart...26 Hose Connection...28 Rear Hose Connection Pull Between Cart...30 Fan And Air System...32 Fan and Transition Pull Behind Air Cart (S/N A1157T-)...32 Fan and Transition Pull Behind Air Cart (S/N A1158T+)...34 Fan and Transition Pull Between Air Cart (S/N A1157T-)...36 Fan and Transition Pull Between Air Cart (S/N A1158T+)...38 Meter Box Assembly Outlet Meter Shaft Assembly Outlet Meter Shaft Assembly Outlet Meter Shaft Assembly...46 Drive...48 Wheel Drive Pull Behind Air Cart...48 Wheel Drive Pull Between Air Cart...50 Caster Wheel & Hub...52 Zero-Max Gearbox Assembly...54 Zero-Max Gearbox Linear Actuator...56 Drive and Gearbox Chain Routing...58 Drive Components...60 Auger...62 Auger Assembly (S/N A1159T-)...62 Auger Assembly (S/N A1160T - A1172T) and all ADC2350E...66 Auger Assambly Pull Between (S/N A1173T+)...70 Auger Assembly Pull Behind (S/N A1173T+)...74 Auger Hydraulic Drive (S/N A1172T-)...78 Auger Hydraulic Drive (S/N A1173T+)...80 Auger Front Support Rest...82 Hydraulics...84 Fan Hydraulic Pull Behind Cart (S/N A1157T-)...84 Fan Hydraulic Pull Behind Cart (S/N A1158T+)...86 Fan Hydraulics Pull Between Cart (S/N A1157T-)...88 Fan Hydraulics Pull Between Cart (S/N A1158T+)...90 Hydraulic System Pull Behind Cart (S/N A1157T-)...92 Hydraulic System Pull Behind Cart (S/N A1158T+)...94 Hydraulic System Pull Between Cart (S/N A1157T-)...96 Hydraulic System Pull Between Cart (S/N A1158T+)...98 Double Selector Valve ( C) Selector Valve ( C) Valve 4Way ( C) Monitor Monitor Lights & Harness Lights & Harness Pull Behind Cart Decals Decals Pull Behind Cart Decals Pull Between Cart Part Number Index Copyright 2018 All rights reserved Printed 10/02/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /02/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 4 4 Outlet Meter Shaft Assembly Outlet Meter Shaft Assembly Outlet Meter Shaft Assembly...46 A Auger Assambly Pull Between (S/N A1173T+)...70 Auger Assembly (S/N A1159T-)...62 Auger Assembly (S/N A1160T - A1172T) and all ADC2350E...66 Auger Assembly Pull Behind (S/N A1173T+)...74 Auger Front Support Rest...82 Auger Hydraulic Drive (S/N A1172T-)...78 Auger Hydraulic Drive (S/N A1173T+)...80 B Bin Assembly...18 Bin To frame...16 C Caster Wheel & Hub...52 D Decals Pull Behind Cart Decals Pull Between Cart Double Selector Valve ( C) Drive and Gearbox Chain Routing...58 Drive Components...60 Hydraulic System Pull Between Cart (S/N A1158T+)...98 L Lights & Harness Pull Behind Cart M Meter Box Assembly...40 Monitor R Rear Hitch...24 Rear Hitch Pull Between Cart...26 Rear Hose Connection Pull Between Cart...30 Rotating Square Hammerblow Jack ( C)...14 S Selector Valve ( C) T Tongue Pull Behind Air Cart...10 Tongue Pull Between Air Cart...12 Tongue to Frame Pull Behind Air Cart...6 Tongue To Frame Pull Between Air Cart...8 V Valve 4Way ( C) W Wheel Drive Pull Behind Air Cart...48 Wheel Drive Pull Between Air Cart...50 Z Zero-Max Gearbox Assembly...54 Zero-Max Gearbox Linear Actuator...56 F Fan and Transition Pull Behind Air Cart (S/N A1157T-)...32 Fan and Transition Pull Behind Air Cart (S/N A1158T+)...34 Fan and Transition Pull Between Air Cart (S/N A1157T-)...36 Fan and Transition Pull Between Air Cart (S/N A1158T+)...38 Fan Hydraulic Pull Behind Cart (S/N A1157T-)...84 Fan Hydraulic Pull Behind Cart (S/N A1158T+)...86 Fan Hydraulics Pull Between Cart (S/N A1157T-)...88 Fan Hydraulics Pull Between Cart (S/N A1158T+)...90 H Handrail And Step...20 Hose Connection...28 Hub And Wheel...22 Hydraulic System Pull Behind Cart (S/N A1157T-)...92 Hydraulic System Pull Behind Cart (S/N A1158T+)...94 Hydraulic System Pull Between Cart (S/N A1157T-) /02/ P

4 Table of Contents P Part Number Index -4-10/02/18

5 Table of Contents Part Number Index 10/02/ P

6 Table of Contents Tongue to Frame Pull Behind Air Cart Part Number Index (Applies to ADC2350B only) P /02/18

7 Table of Contents Part Number Index Frame And Bins Tongue to Frame Pull Behind Air Cart (Applies to ADC2350B only) Ref. Part No. Part Description Comments Revision dwg H C C C C C C H C C Image No. FRONT FRAME MOUNT WELDMNT HHCS 3/4-10X3 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 5/8-11X2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT AIR DRILL FRAME WELDMENT WASHER FLAT 5/8 SAE PLT WASHER FLAT 3/4 SAE PLT 10/02/ P

8 Table of Contents Part Number Index Tongue To Frame Pull Between Air Cart (Applies to ADC2350 only) P /02/18

9 Table of Contents Part Number Index Frame And Bins Tongue To Frame Pull Between Air Cart (Applies to ADC2350 only) Ref. Part No. Part Description Comments Revision dwg H H C C C C C C C C Image No. FRONT FRAME TRACTOR MOUNT WLDM AIR DRILL FRAME WELDMENT HHCS 5/8-11X2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 3/4-10X3 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT WASHER FLAT 3/4 HARD ASTMF436 WASHER FLAT 5/8 HARD ASTMF436 10/02/ P

10 Table of Contents Tongue Pull Behind Air Cart Part Number Index (Applies to ADC2350B only) P /02/18

11 Table of Contents Part Number Index Frame And Bins Tongue Pull Behind Air Cart (Applies to ADC2350B only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C D C H C C C C D C C C K K K D C C C C H C C C D C C C H C Image No. SAFETY CHAIN LB NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 5/8-11X2 1/4 GR5 PINTLE HOOK SQ.BASE BDB SAFETY CHAIN WASHER HHCS 1 1/4-7X3 1/2 GR5 PLT ADC2350 TONGUE WELDMENT HHCS 1-8X6 1/2 GR5 NUT HEX LOCK 1-8 PLT NUT LOCK 3/4-10 PLT HHCS 3/8-16X3 3/4 GR5 CASTER ARM PULL PIN HHCS 5/8-11X2 3/4 GR5 NUT LOCK 5/8-11 PLT WHL NUT, SWIVEL FLG 5/8-18 UNF 21.5L-16.1 TIRE/18-8 BLT WL LH 21.5L-16.1 TIRE/18-8 BLT WL RH 8 BLT HUB/SPDL PKG 2220 CART CASTER VERTICAL SPINDLE BRG CONE 4.50ID SEAL ID X X.562 BRG CONE 3.50ID 593 BRG CUP 6.00OD 592A FRONT FRAME MOUNT WELDMNT WASHER BRG TONGUED K91517 NUT BRG LOCK, TAN-17 VERTICAL SPINDLE GASKET TOOL BAR CAP HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT WASHER BRG LOCK, TW117 AIR DRILL FRONT CASTER WELDMT BRG CUP 7.00OD Refer to "Caster Wheel & Hub" for breakdown Refer to "Caster Wheel & Hub" for breakdown Refer to "Caster Wheel And Hub" for breakdown 10/02/ P

12 Table of Contents Tongue Pull Between Air Cart Part Number Index (Applies to ADC2350 only) P /02/18

13 Table of Contents Part Number Index Frame And Bins Tongue Pull Between Air Cart (Applies to ADC2350 only) Ref. Part No. Part Description Comments Revision dwg D H C C C C C C C C C D C C C C C C C C C D C C C C C C H H H C C C H C A Image No. CASTING LARGE HITCH STRAP FRONT FRAME TRACTOR MOUNT WLDM SPRING HOSE LOOP HEAVY HHCS 1/2-13X3 1/2 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1/2-13 PLT SAFETY CHAIN LB HHCS 1 1/4-7X9 1/2 GR5 SPTHD SAFETY CHAIN WASHER HHCS 1 1/4-7X11 GR5 SPTHD PIN, HAIR COTTER 3/16 WIRE DIA SQ TB JACK LB 10 STROKE PIN HITCH 3/4 X 4 3/8 HHCS 1/4-20X3/4 GR5 WASHER FLAT 1/4 SAE PLT WESBAR 7-PIN CONNECTOR HOLDER WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 1/2-13X1 1/2 GR5 LIGHT HARNESS STORAGE BRACKET WESBAR AG MODULE ASSY SCREW PAN HD 6-32 X 1/2 SS WASHER FLAT #6 SAE PLT WASHER LOCK #6 SS NUT HEX 6-32 SS AG LIGHT WIRING HARNESS-25' AG LIGHT HARNESS EXT-10' CLEVIS HITCH WELDMENT SINGLE HITCH STRAP-SMALL SINGLE HITCH STRAP-LARGE NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT CAT 5 PERFECT HITCH CAT 4 TO CAT 5 HITCH ADAPTER HHCS 1-8X7 1/2 GR5 CAT V HITCH ADAPTER KIT Includes items: /02/ P

14 Table of Contents Part Number Index Rotating Square Hammerblow Jack ( C) P /02/18

15 Table of Contents Part Number Index Frame And Bins Rotating Square Hammerblow Jack ( C) Ref. Part No. Part Description Comments Revision dwg C C C X X Image No. HB VIKING COVER HB COVER SCREW HB BEVEL GEAR HB GROOVE PIN.25 X 1.5 HB WEAR PLATE HB THRUST BEARING HB BEARING SEAT HB SCREW & NUT ASSY HHCS 3/8-16X2 1/2 GR5 WASHER FLAT 3/8 NUT LOCK 3/8-16 PLT HB CRANK, NARROW CLEVIS REP BY HB CROSS SHAFT REP BY HB BEARING SLEEVE HB BULLDOG 12000LB LABEL HB BEVEL GEAR PINION HB RETAINING PIN 10/02/ P

16 Bin To frame Table of Contents Part Number Index P /02/18

17 Bin To frame Table of Contents Part Number Index Frame And Bins Ref. Part No. Part Description Comments Revision dwg H H L L C C C C Image No. AIR DRILL FRAME WELDMENT 175 BU HOPPER TANK HOOP WLDMNT 175 BU FRONT BIN ASSEMBLY 175 BU REAR BIN ASSEMBLY WASHER FLAT 1/2 USS HARD PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1/2-13X2 1/4 GR5 10/02/ P

18 Bin Assembly Table of Contents Part Number Index P /02/18

19 Bin Assembly Table of Contents Part Number Index Frame And Bins Ref. Part No. Part Description Comments Revision dwg H H H H H D D D D D D C C C C C C C C C C C C C C C C C C C C C K H C C C C H C R C Image No. ROUND BIN LID WELDMENT LID SWIVEL WELDMENT AIR DRILL BIN LID HOOK BIN LADDER WELDMENT AIR DRILL BIN LID HANDLE WLMNT BIN LID HINGE SUPPORT PLATE PLASTIC BIN TOP PLATE PLASTIC BIN BOTTOM PLATE LID SWIVEL INNER PIVOT TUBE BIN LID TOP CROSS BAR ADC2350 BIN LID SEAL HHCS 3/8-16X1 GR5 HHCS 3/8-16X1 1/2 GR5 HHCS 1/2-13X2 1/4 GR5 HHCS 1/2-13X2 3/4 GR5 HFSS 5/16-18X1 GR5 PLT RHSNB 3/8-16X1 1/2 GR5 HHCS 3/4-10X8 GR5 PLT NUT HEX 3/8-16 PLT NUT HEX 3/4-10 PLT NYLOCK NUT HEX NYLOCK 1/ FLG TP LK 5/16-18ZNYCR NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 3/8 NEOPRENE PLT PIN ROLL 1/2 X 1 3/4 U-BOLT 3/8-16 X 2 5/8 X 3 1/4 SPRING COMP DIE.75X.375X1.50L FLNG BUSHING 1 1/8 X 1 X 3/4 175 BU AIR DRILL BIN METER BOX ASSY FOR FRONT FAN STRAINER BASKET WELDMENT AD 1/8MNPT 3/16 HOSE BARB U-BOLT 5/16-18X1 1/2X2 1/2 RND WASHER FLAT 5/16 USS PLT NUT HEX NYLOCK 5/16-18 PLT BIN LADDER UPPER CLAMP WELDMT SILICON 35YR CLEAR 10 OZ EPDM RUBBER TB.48OD X.058WL DIGITAL SCALE 50 LB/23 KG Refer to "Meter Box Assembly" for breakdown For Export 10/02/ P

20 Table of Contents Handrail And Step Part Number Index P /02/18

21 Table of Contents Part Number Index Frame And Bins Handrail And Step Ref. Part No. Part Description Comments Revision dwg H H C C D C C D C C H C C C C H D C H Image No. STEP WELDMENT AUGER LADDER WELDMENT RING, SPLIT 1-1/4 I.D. SPRING COMP 1/2 OD X.052 W PLUNGER LOCK PIN HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WALKBOARD LADDER PIVOT BUSHING WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PIN RELEASE HANDLE PIN ROLL 5/32 X 5/8 PLT U-BOLT 1/2-13 X 6 1/32 X 4 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT CDA2350 RIGHT LADDER WELDMENT AIR DRILL PLATFORM HHCS 3/8-16X1 GR5 ADC2350 LEFT LADDER WELDMENT 10/02/ P

22 Hub And Wheel Table of Contents Part Number Index P /02/18

23 Hub And Wheel Table of Contents Part Number Index Frame And Bins Ref. Part No. Part Description Comments Revision dwg26260 Image No C HHCS 1-8X5 1/2 GR C NUT HEX TOP LOCK 1-8 PLT C SNAP RING INT H LOCKOUT SPROCKET WELDMENT H LOCKOUT SPROCKET WELDMENT C SNAP RING EXT C BRG 100MM ID 150MM OD 24MM C HSFCHCS 1/2-20 X 1 GR H LOCKOUT HUB WELDMENT H LOCKOUT HUB WELDMENT LH DRIVE C PIN ROLL 3/16 X 2 1/2 LG. PTL C SPRING COMP 1/2 OD X 1 LG C SPRING COMP.625OD.055W 1.25L D LOCKOUT PLUNGER D LOCKOUT PLUNGER C ADC 2350 SPINDLE 10 BLT 12000# GKN-P GREASE SEAL FOR C C BRG CONE 2.50ID # C BRG CUP 4.43ODX.93WD # C HUB STUD 3/4-16X2 9/16 GR5 GKN-L BOLT WHEEL HUB FOR C C BRG CUP 4.25ODX.87WD #453A C BRG CONE 1.75IDX1.15WD #460 GKN-P SPINDLE WASHER FOR C C NUT HEX SLOTTED 1 1/4-12 PLAIN C PIN COTTER 7/32 X 2 GKN-P GASKET FOR C HUB GKN-P GREASE CAP FOR C HUB C HHCS 5/16-18X3/4 GR C NUT HEX FLANGE 3/4-16 PLT C TIRE 23.5/ PLY C TIRE 30.5LR LOAD INDEX C WHEEL 26 DW X 20 TB C WHEEL 32 X BOLT C VALVE STEM METAL TR-575 TUBLES K 23.5/55-26 TIRE/20-10BLT WL LH K 23.5/55-26 TIRE/20-10BLT WL RH K 30.5L-32 TIRE/27-10 BLT WHL RH K 30.5L-32 TIRE/27-10 BLT WHL LH C HUB ASSY 10 BOLT 12000# S LOCKOUT SPROCKET ASSEMBLY S LOCKOUT SPROCKET ASY LH DRIVE (S/N A1163T-) (S/N A1164T+) (S/N A1163T-) (S/N A1164T+) (S/N A1163T-) (S/N A1164T+) (S/N A1163T-) (S/N A1164T+) Applies to Pull Between Cart only Applies to Pull Behind Cart only Applies to Pull Between Cart only Applies to Pull Behind Cart only (Shown) Applies to Pull Between Cart Only Applies to Pull Between Cart Only Applies to Pull Behind Cart only Applies to Pull Behind Cart only (S/N A1163T-) Includes items 3-6, 8-11 (S/N A1164T+) Includes items 3-6, /02/ P

24 Rear Hitch (Applies to ADC2350 only) Table of Contents Part Number Index P /02/18

25 Rear Hitch Table of Contents Part Number Index Frame And Bins (Applies to ADC2350 only) Ref. Part No. Part Description Comments Revision dwg H H H H C C C C C H C H H C C C Image No. PULL LINK WELDMENT CTA PULL LINK WELDMENT PULL BAR WELDMENT CTA PULL BAR WELDMENT PIN HITCH 1 1/4 X 4 1/2 PIN HAIR COTTER.243 WIRE PLT PIN COTTER 7/32 X 2 HHCS 5/8-11X1 GR5 NYL WASHER LOCK SPRING 5/8 PLT CENTER PULL LINK PIN PIN ROLL 3/8 X 2 PLT OUTER PULL LINK PIN AIR DRILL FRAME WELDMENT NUT HEX 5/8-11 PLT GREASE ZERK 1/4-28 X 90-DEG DECAL DANGER CRUSH AD/IMPLEM Used with NTA-3010 & NTA-3510 Used with CTA-4000 Used with NTA-3010 & NTA-3510 Used with CTA-4000 Used with NTA-3010 & NTA-3510 Used with CTA /02/ P

26 Table of Contents Rear Hitch Pull Between Cart Part Number Index (Applies to ADC2350 only) P /02/18

27 Table of Contents Part Number Index Frame And Bins Rear Hitch Pull Between Cart (Applies to ADC2350 only) Ref. Part No. Part Description Comments Revision dwg C C C C C H C C C C C C Image No. POWERPIN CT4 DRAWPIN W/ HANDLE CAT4 DROPPIN HTCH HAMMER STRAP POWER PIN CAT4 TRIGGER WASHER LOCK M20 PLT HHCS M20X2.5X100 GR10.9 REAR DRAWBAR HITCH ADC NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X1 1/2 GR5 HHCS 3/4-10X2 GR5 10/02/ P

28 Hose Connection Table of Contents Part Number Index P /02/18

29 Table of Contents Part Number Index Frame And Bins Hose Connection Ref. Part No. Part Description Comments Revision dwg C D C C C C D C C C C C D C C C D C C C H C H C C C R D D C C C C C C C Image No. U-BOLT 1/2-13 X 6 1/32 X 4 1/4 TONGUE AIR HOSE BRACKET WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT HYD HOSE CLAMP BRACKET HHCS 5/16-18X1 1/2 GR5 U-BOLT 5/16-18X1 1/2X2 1/2 RND SNAP RING EXT 1 1/2 SHAFT WASHER FLAT 5/16 USS PLT HHCS 5/16-18X3/4 GR5 PULL BEHIND CART HYD HOSE BRKT CP 1 1/16 FORB QD FEMALE CP 1 1/16 FORB QD MALE AUGER LATCH CLAMP IMP LIFT SWITCH CONNECTOR BRKT SCREW PAN HD #4-40X3/8 PLT NUT HEX #4-40 PLT WASHER LOCK #4 PLT CART AIR HOSE CONNECTION WELDM HOSE CONNECTION GASKET IMPLEMENT HOSE CONNECTION WELD 2 1/2 AIR HOSE BAND CLAMP CABLE TIE.19X D 50LB CP 3/4FORB QD BH SEED HOSE 2 1/2 ID KANAFLEX 2 1/2 INCH AIR HOSE XX LG 1/4 MARKER HYD HOSE GUARD AD 9/16MJIC 3/4MORB CP 3/4FORB QD FLATFACE CP 3/4FORB QD FEMALE FLATFACE U-BOLT 1/4-20 X X 2 RND NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 USS PLT (S/N A1158T+) (S/N A1158T+) (S/N A1158T+) (S/N A1158T+) (S/N A1158T+) (S/N A1158T+) (S/N A1158T+) 10/02/ P

30 Table of Contents Part Number Index Rear Hose Connection Pull Between Cart (Applies to ADC2350 only) P /02/18

31 Table of Contents Part Number Index Frame And Bins Rear Hose Connection Pull Between Cart (Applies to ADC2350 only) Ref. Part No. Part Description Comments Revision dwg R C H C C C C C H C C C C C C D C C H Image No. SEED HOSE 2 1/2 ID 2 1/2 AIR HOSE BAND CLAMP IMPLEMENT HOSE CONNECTION WELD HOSE CONNECTION GASKET NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT AUGER LATCH CLAMP HHCS 5/16-18X3/4 GR5 QUICK DISCONNECT BKT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 USS PLT HHCS 3/8-16X1 3/4 GR5 HHCS 1/2-13X9 1/2 GR5 WASHER FLAT 1/2 USS PLT PLATE - TORCHED WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT QUICK DISCONNECT BKT FERT 10/02/ P

32 Table of Contents Part Number Index Fan and Transition Pull Behind Air Cart (S/N A1157T-) (Applies to ADC2350B only) P /02/18

33 Table of Contents Part Number Index Fan And Air System Fan and Transition Pull Behind Air Cart (S/N A1157T-) (Applies to ADC2350B only) Ref. Part No. Part Description Comments Revision dwg D C C C C D H C C C C C D C H H C C C C C C C C C C C C K C D D C C H D D C C C C C C C C Image No. SAFETY LIGHT SUPPORT TUBE 2 1/2 AIR HOSE BAND CLAMP U-BOLT 3/8-16 X 2 1/32 X 3 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT LIGHT BAR AND FAN SUPPORT BAR FAN OUTLET TRANSITION HHCS 3/4-10X2 1/4 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SCREW HEX 5/16-12X3/4 THD FRM CLAMP WRM DRV #4 SS ( ) AIR GAUGE HOSE 38 6 HYDRAULIC FAN KIT W/ SCREEN AIR DRILL FRAME WELDMENT REAR FAN MOUNT WELDMENT HHCS 1/2-13X1 1/4 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT MAGNEHELIC PRES GAGE-0-50INH2O BREATHER FILTER VENT 1/8 NPT HHCS 3/8-16X1 GR5 HHCS 1/4-20X1 GR5 WASHER LOCK SPRING 1/4 PLT FAN INLET RAIN SHIELD HWH #12-14X3/4 AD 1/8MNPT X 1/4HB BRASS METER BOX ASSY FOR FRONT FAN HYD MOTOR 7/8ORBF 2 1/2 INCH AIR HOSE 52 1/2 LG 2 1/2 INCH AIR HOSE 56 1/2 LG HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 5/16 USS PLT YP FAN MOUNT WLDMNT 2 DJ FAN SENSOR MOUNT BRKT HYD MOTOR 1/8 KEY BUSHING - FAN NUT HEX FLANGE 1/4-20 PLT 6 FAN HOUSING RH SIDE 13 FAN IMPELLER 6 FAN HOUSING LH SIDE HFSS 1/4-20X1 GR5 HYDRAULIC MOTOR MOUNT PLATE SCREW HEX SELF TAP 1/4-20X3/4 HOSE CLIP 13/16 ID DECAL WARNING AD FAN HAZARD DECAL SLOW MOVING VEHICLE WASHER FLAT 1/4 USS PLT Refer to "Meter Box Assembly" for breakdown 10/02/ P

34 Table of Contents Part Number Index Fan and Transition Pull Behind Air Cart (S/N A1158T+) (Applies to ADC2350B only) P /02/18

35 Table of Contents Part Number Index Fan And Air System Fan and Transition Pull Behind Air Cart (S/N A1158T+) (Applies to ADC2350B only) Ref. Part No. Part Description Comments Revision dwg D C C C C D H C C C C C D C H H C C C C C C C C C C C C K C D D C C H D D C C C C C C C C C Image No. SAFETY LIGHT SUPPORT TUBE 2 1/2 AIR HOSE BAND CLAMP U-BOLT 3/8-16 X 2 1/32 X 3 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT LIGHT BAR AND FAN SUPPORT BAR FAN OUTLET TRANSITION HHCS 3/4-10X2 1/4 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SCREW HEX 5/16-12X3/4 THD FRM CLAMP WRM DRV #4 SS ( ) AIR GAUGE HOSE 38 6 HYDRAULIC FAN KIT W/ SCREEN AIR DRILL FRAME WELDMENT REAR FAN MOUNT WELDMENT HHCS 1/2-13X1 1/4 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT MAGNEHELIC PRES GAGE-0-50inH2O BREATHER FILTER VENT 1/8 NPT HHCS 3/8-16X1 GR5 HHCS 1/4-20X1 GR5 WASHER LOCK SPRING 1/4 PLT FAN INLET RAIN SHIELD HWH #12-14X3/4 AD 1/8MNPT X 1/4HB BRASS METER BOX ASSY FOR FRONT FAN PARKER F-11 FAN MOTOR 2 1/2 INCH AIR HOSE 52 1/2 LG 2 1/2 INCH AIR HOSE 56 1/2 LG HHCS 1/2-13X1 3/4 GR5 NUT HEX NYLOCK 1/2-13 YP FAN MOUNT WLDMNT DJ FAN SENSOR MOUNT BRKT HYD MOTOR 1/8 KEY BUSHING, JA X 20 MM NUT HEX WHIZ 1/4-20 PLT 6 FAN HOUSING RH SIDE 13 FAN IMPELLER 6 FAN HOUSING LH SIDE HFSS 1/4-20X1 GR5 VOLVO HYD MOTOR MOUNT PLT SCR HEX SELF TAP 1/4-20X1TYPEF HOSE CLIP 13/16 ID DECAL WARNING AD FAN HAZARD DECAL SLOW MOVING VEHICLE WASHER FLAT 1/4 USS PLT EXT. HARNESS 3', FAN RPM 10/02/ P

36 Table of Contents Part Number Index Fan and Transition Pull Between Air Cart (S/N A1157T-) (Applies to ADC2350 only) P /02/18

37 Table of Contents Part Number Index Fan And Air System Fan and Transition Pull Between Air Cart (S/N A1157T-) (Applies to ADC2350 only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C H C C C C D H C C C C D H C D D K C D C C C C C C C H H D D C Image No. 6 HYDRAULIC FAN KIT W/ SCREEN NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT FAN INLET RAIN SHIELD HWH #12-14X3/4 AD 1/8MNPT X 1/4HB BRASS HOSE CLIP 13/16 ID HYD MOTOR 7/8ORBF CLAMP WRM DRV #4 SS ( ) FAN OUTLET TRANSITION D.S. SCREW HEX 5/16-12X3/4 THD FRM HHCS 1/4-20X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 5/16 USS PLT HYD MOTOR 1/8 KEY YP FAN MOUNT WLDMNT 2 HHCS 1/4-20X1 GR5 WASHER LOCK SPRING 1/4 PLT HHCS 3/8-16X1 GR5 MAGNEHELIC PRES GAGE-0-50INH2O AIR GAUGE HOSE 38 FAN OUTLET TRANSITION 2 1/2 AIR HOSE BAND CLAMP 2 1/2 INCH AIR HOSE 25 LONG 2 1/2 INCH AIR HOSE 52 1/2 LG METER BOX ASSY FOR FRONT FAN WASHER FLAT 1/4 USS PLT DJ FAN SENSOR MOUNT BRKT HYDRAULIC MOTOR MOUNT PLT SCREW HEX SELF TAP 1/4-20X3/4 HFSS 1/4-20X1 GR5 6 FAN HOUSING LH SIDE 13 FAN IMPELLER 6 FAN HOUSING RH SIDE BUSHING - FAN NUT HEX FLANGE 1/4-20 PLT PIN ROLL 3/16 X 1 PLT NUT-HEX 1/4-20 PLT AIR CONTROL BAFFLE WLDMNT AIR CONTROL BAFFLE BOX WLDMNT AIR CTRL BAFFLE PIVOT FLANGE AIR CTRL BAFFLE PIVOT SHAFT DECAL BAFFLE POSITION A.D. Refer to "Meter Box Assembly" for breakdown 10/02/ P

38 Table of Contents Part Number Index Fan and Transition Pull Between Air Cart (S/N A1158T+) (Applies to ADC2350 only) P /02/18

39 Table of Contents Part Number Index Fan And Air System Fan and Transition Pull Between Air Cart (S/N A1158T+) (Applies to ADC2350 only) Ref. Part No. Part Description Comments Revision C C C C C C C C C H C C C C D H C C C C D H C D D K C D C C C C C C C H H D D Image No. 6 HYD FAN W/CASE DRAIN MOTOR NUT HEX NYLOCK 1/2-13 WASHER LOCK SPRING 3/8 PLT FAN INLET RAIN SHIELD HWH #12-14X3/4 AD 1/8MNPT X 1/4HB BRASS HOSE CLIP 13/16 ID PARKER F-11 FAN MOTOR CLAMP WRM DRV #4 SS ( ) FAN OUTLET TRANSITION D.S. SCREW HEX 5/16-12X3/4 THD FRM HHCS 1/4-20X3/4 GR5 HHCS 1/2-13X1 3/4 GR5 DECAL BAFFLE POSITION A.D. HYD MOTOR 1/8 KEY YP FAN MOUNT WLDMNT HHCS 1/4-20X1 GR5 WASHER LOCK SPRING 1/4 PLT HHCS 3/8-16X1 GR5 MAGNEHELIC PRES GAGE-0-50inH2O AIR GAUGE HOSE 38 FAN OUTLET TRANSITION 2 1/2 AIR HOSE BAND CLAMP 2 1/2 INCH AIR HOSE 25 LONG 2 1/2 INCH AIR HOSE 52 1/2 LG METER BOX ASSY FOR FRONT FAN WASHER FLAT 1/4 USS PLT DJ FAN SENSOR MOUNT BRKT VOLVO HYD MOTOR MOUNT PLT SCR HEX SELF TAP 1/4-20X1TYPEF HFSS 1/4-20X1 GR5 6 FAN HOUSING LH SIDE 13 FAN IMPELLER 6 FAN HOUSING RH SIDE BUSHING, JA X 20 MM NUT HEX WHIZ 1/4-20 PLT PIN ROLL 3/16 X 1 PLT NUT HEX 1/4-20 PLT AIR CONTROL BAFFLE WLDMNT AIR CONTROL BAFFLE BOX WLDMNT AIR CTRL BAFFLE PIVOT FLANGE AIR CTRL BAFFLE PIVOT SHAFT EXT. HARNESS 3', FAN RPM 10/02/ P

40 Table of Contents Meter Box Assembly Part Number Index P /02/18

41 Table of Contents Part Number Index Fan And Air System Meter Box Assembly Ref. Part No. Part Description Comments Revision dwg C C C C C H C C D C C H C C D C V D H C H S S S S S S S S S C H D D C D C C Image No. HHCS 1/4-20X1 1/2 GR5 WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT DESTACO HOLD DOWN ACTION CLAMP NUT-HEX 1/4-20 PLT CALIBRATION LID WELDMENT METERING BOX ACCESS SEAL METER BOX OUTLET TRANSITION METER BOX PARTITION LASER METER BOX INLET TRANSITION PIN LINCH 5/16 X 2 11/32 45T QUICK CHANGE SPKT WELDMENT SCR HEX SELF TAP 1/4-20X1TYPEF HSG RIBB FLG 6BOLT PLT METERING BOX SEAL FLANGE SEAL 1.33IDX2.23ODX.31T BEARING.755 HEX BORE W/S-S GEAR 54 TOOTH QUICK CHANGE METERING BOX WELD SIDE ACCESS HHCS 1/4-20X5/8 GR5 METERING BOX TOP PANEL WELDMNT 6 OUTLET 2 STAR SHAFT ASSY 6 OUTLET 3 STAR SHAFT ASSY 6 OUTLET 4 STAR SHAFT ASSY 5 OF 6 OUTLET 2 STAR SHAFT ASY 5 OF 6 OUTLET 3 STAR SHAFT ASY 5 OF 6 OUTLET 4 STAR SHAFT ASY 4 OF 6 OUTLET 2 STAR SHAFT ASY 4 OF 6 OUTLET 3 STAR SHAFT ASY 4 OF 6 OUTLET 4 STAR SHAFT ASY GEAR 17 TOOTH QUICK CHANGE METER SHAFT WELDMENT METER BOX FILLER PLATE APPLICATION RATE SENSOR ADAPTR HSHCS 1/4-28X1/2 GR8 BLK APP RATE SENSOR ANCHOR BRKT CLAMP BAND 2 1/2 CAP 2 1/2 OD TUBE 1 1/2 LONG Refer to "6 Outlet Meter Shaft Assembly" for breakdown Refer to "6 Outlet Meter Shaft Assembly" for breakdown Refer to "6 Outlet Meter Shaft Assembly" for breakdown Refer to "5 Outlet Meter Shaft Assembly" for breakdown Refer to "5 Outlet Meter Shaft Assembly" for breakdown Refer to "5 Outlet Meter Shaft Assembly" for breakdown Refer to "4 Outlet Meter Shaft Assembly" for breakdown Refer to "4 Outlet Meter Shaft Assembly" for breakdown Refer to "4 Outlet Meter Shaft Assembly" for breakdown 10/02/ P

42 Table of Contents 4 Outlet Meter Shaft Assembly Part Number Index P /02/18

43 Table of Contents Part Number Index Fan And Air System 4 Outlet Meter Shaft Assembly Ref. Part No. Part Description Comments Revision dwg D D V C C C C C C C C C C C C C S S S D C Image No. METER SHAFT MOUNT PLATE METER SHAFT BEARING.755 HEX BORE W/S-S SNAP RING EXT.812X SCR HEX SELF TAP 1/4-20X1TYPEF SEAL 1.33IDX2.23ODX.31T AGITATOR 8 POINT HALF METERING BOX MIDDLE SPACER METERING BOX END SPACER METERING BOX END SPACER HSG RIBB FLG 6BOLT PLT METERING BOX SPACER-1 IN METERING BOX END SPACER METERING BOX END SPACER METERING BOX END SPACER (CLIP) METERING BOX END SPACER LONG 4 OF 6 OUTLET 2 STAR SHAFT ASY 4 OF 6 OUTLET 3 STAR SHAFT ASY 4 OF 6 OUTLET 4 STAR SHAFT ASY METER SHAFT MOUNT PLATE AIR DRILL METER SHAFT GASKET 10/02/ P

44 Table of Contents 5 Outlet Meter Shaft Assembly Part Number Index P /02/18

45 Table of Contents Part Number Index Fan And Air System 5 Outlet Meter Shaft Assembly Ref. Part No. Part Description Comments Revision dwg D D V C C C C C C C C C C C C C S S S D C Image No. METER SHAFT MOUNT PLATE METER SHAFT BEARING.755 HEX BORE W/S-S SNAP RING EXT.812X SCR HEX SELF TAP 1/4-20X1TYPEF SEAL 1.33IDX2.23ODX.31T AGITATOR 8 POINT HALF METERING BOX MIDDLE SPACER METERING BOX END SPACER METERING BOX END SPACER HSG RIBB FLG 6BOLT PLT METERING BOX SPACER-1 IN METERING BOX END SPACER METERING BOX END SPACER METERING BOX END SPACER (CLIP) METERING BOX END SPACER LONG 5 OF 6 OUTLET 2 STAR SHAFT ASY 5 OF 6 OUTLET 3 STAR SHAFT ASY 5 OF 6 OUTLET 4 STAR SHAFT ASY METER SHAFT MOUNT PLATE AIR DRILL METER SHAFT GASKET 10/02/ P

46 Table of Contents 6 Outlet Meter Shaft Assembly Part Number Index P /02/18

47 Table of Contents Part Number Index Fan And Air System 6 Outlet Meter Shaft Assembly Ref. Part No. Part Description Comments Revision dwg D D V C C C C C C C C C C C C C S S S D C Image No. METER SHAFT MOUNT PLATE METER SHAFT BEARING.755 HEX BORE W/S-S SNAP RING EXT.812X SCR HEX SELF TAP 1/4-20X1TYPEF SEAL 1.33IDX2.23ODX.31T AGITATOR 8 POINT HALF METERING BOX MIDDLE SPACER METERING BOX END SPACER METERING BOX END SPACER HSG RIBB FLG 6BOLT PLT METERING BOX SPACER-1 IN METERING BOX END SPACER METERING BOX END SPACER METERING BOX END SPACER (CLIP) METERING BOX END SPACER LONG 6 OUTLET 2 STAR SHAFT ASSY 6 OUTLET 3 STAR SHAFT ASSY 6 OUTLET 4 STAR SHAFT ASSY METER SHAFT MOUNT PLATE AIR DRILL METER SHAFT GASKET 10/02/ P

48 Table of Contents Wheel Drive Pull Behind Air Cart Part Number Index (Applies to ADC2350B only) P /02/18

49 Table of Contents Part Number Index Drive Wheel Drive Pull Behind Air Cart (Applies to ADC2350B only) Ref. Part No. Part Description Comments Revision dwg K S S D C C C C C C C H H C C C C C C C C D C C C C C C C D Image No. ADC BOLT HUB AND SPINDL LOCKOUT SPROCKET ASSEMBLY LOCKOUT SPROCKET ASY LH DRIVE KEY 1/4 X 1/4 X 1 1/4 LG SPKT 60B13 1 BORE W/KW & SS HHCS 5/16-18X1 3/4 GR5 BRG FLG 1.00ID 2BOLT WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HHCS 1-8X5 1/2 GR5 LH SPINDLE EXTENSION WLDMNT RH SPINDLE EXTENSION WLDMNT HHCS 3/4-10X2 1/4 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT NUT HEX TOP LOCK 1-8 PLT HHCS 5/8-11X2 GR5 WASHER FLAT 5/8 USS PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT PULL BEHIND LOWER DRIVE SHAFT SPKT 50B39 X 1 BORE SPKT 50B30 X 1 W/KW & 2 SS SPKT 50B26 X 1 W/KW & 2 SS DECAL ADC2350 ROTATION ARROW HHCS M8X1.25X14 GR8.8 NUT HEX NYLOCK M8X1.25 PLT DECAL CLUTCH LOCKUP CHAIN RL #60 52 PITCHES (S/N A1163T-) Refer to "Hub And Wheel" for breakdown (S/N A1164T+) Refer to "Hub And Wheel" for breakdown Used with 3N-4010HDA Used with CTA4500, FCA4500, CTA4000, NTA3010 Used with NTA /02/ P

50 Table of Contents Wheel Drive Pull Between Air Cart Part Number Index (Applies to ADC2350 only) P /02/18

51 Table of Contents Part Number Index Drive Wheel Drive Pull Between Air Cart (Applies to ADC2350 only) Ref. Part No. Part Description Comments Revision dwg K S S D C D C C C C C C D C C H D D C C C C Image No. ADC BOLT HUB AND SPINDL LOCKOUT SPROCKET ASSEMBLY LOCKOUT SPROCKET ASY LH DRIVE KEY 1/4 X 1/4 X 1 1/4 LG SPKT 60B13 1 BORE W/KW & SS LOWER DRIVE BRG MOUNT PLT HHCS 3/4-10X1 3/4 GR5 HHCS 5/16-18X1 3/4 GR5 BRG FLG 1.00ID 2BOLT WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT AIR DRILL LOWER DRIVE SHAFT SPKT 50B26 X 1 W/KW & 2 SS SPKT 50B30 X 1 W/KW & 2 SS SPEED SENSOR DISK WELDMENT CHAIN RL #60 52 PITCHES CHAIN RL # PITCHES DECAL ADC2350 ROTATION ARROW HHCS M8X1.25X14 GR8.8 NUT HEX NYLOCK M8X1.25 PLT DECAL CLUTCH LOCKUP (S/N A1163T-) Refer to "Hub And Wheel" for breakdown (S/N A1164T+) Refer to "Hub And Wheel" for breakdown Used with NTA-3510 Used with NTA-3010 & CTA /02/ P

52 Table of Contents Caster Wheel & Hub Part Number Index P /02/18

53 Table of Contents Part Number Index Drive Caster Wheel & Hub Ref. Part No. Part Description Comments Revision dwg C C C K K C C C C C C C P C C C C H Image No. TIRE 21.5L PLY WHEEL, 16.1 X W18C VALVE STEM METAL TR-575 TUBLES 21.5L-16.1 TIRE/18-8 BLT WL LH 21.5L-16.1 TIRE/18-8 BLT WL RH WHL NUT, SWIVEL FLG 5/8-18 UNF GREASE CAP X.28 BRG CONE 3.75ID 594A BRG CUP 2.89ODX.58WD #LM HUB ASSEMBLY 8 BOLT 6 PILOT BRG CUP 3.81D 382A BRG CONE 2.25ID 387 ARMSTRONG SEAL C, -076C HUB STUD 5/8-18X2 1/2 GR5 SPNDL ASS'Y 220 BU CART FRAME HHCS 3/4-10X5 GR5 NUT LOCK 3/4-10 PLT AIR DRILL FRONT CASTER WELDMT 10/02/ P

54 Table of Contents Zero-Max Gearbox Assembly Part Number Index P /02/18

55 Table of Contents Part Number Index Drive Zero-Max Gearbox Assembly Ref. Part No. Part Description Comments Revision dwg C H D C C H C C D C H C C C C C C H H C C S C C C D C C Image No. PIN COTTER 1/4 X 2 PLT 15 TOOTH DRIVE SPROCKET KEY 1/4 X 1/4 X 1 1/4 LG SPKT 40B23 X 1 BORE W/KW & SS ZERO-MAX VARIABLE RATE GEARBOX CONTROL CRANK HANDLE WLDMT PIN HAIR COTTER.148 WIRE PIN ROLL 5/32 X 5/8 PLT CONTROL ARM ADJUSTMENT SCREW GAUGE WHEEL SFT PIVOT BUSHING CONTROL ARM WELDMENT PIN WIRE RETAINING 1/4 X 1 3/4 GEARBOX CONTROL ARM DECAL NUT HEX 7/16-20 PLT WASHER LOCK 7/16 PLT NUT HEX 3/8-24 PLT WASHER LOCK SPRING 3/8 PLT CONTROL ARM ANCHOR WELDMENT SHAFT CONTROL WELDMENT PIN ROLL 1/4 X 2 LG PL WASHER FLAT 3/8 USS PLT ZERO-MAX GEARBOX STANDARD ASY HHCS 1/2-13X3 1/2 GR5 WASHER FLAT 1/2 USS HARD PLT IDLER 1 PC 2.38X1.01X1.062 TUBE RND 1 OD X 7/32W X 2.13 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 10/02/ P

56 Table of Contents Zero-Max Gearbox Linear Actuator Part Number Index P /02/18

57 Table of Contents Part Number Index Drive Zero-Max Gearbox Linear Actuator Ref. Part No. Part Description Comments Revision dwg C H H C C C C C C C C S C C C Image No. PIN COTTER 3/32 X 1/2 ELECTRONIC CONTROL ARM WLDMNT LINEAR ACTUATOR MOUNT WELDMENT CABLE TIE.19X DIA 50LB HHCS 3/8-16X1 GR5 HHCS 1/4-20X3 GR5 NUT HEX 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER LOCK SPRING 3/8 PLT PIN COTTER 1/4 X 2 PLT PIN CLEVIS 1/4 X 1 23/64 USABL G P ZEROMAX VALVE DRIVER LINEAR ACTUATOR 12V 8 IN 112LB GAUGE WHEEL SFT PIVOT BUSHING PIN WIRE RETAINING 1/4 X 1 3/4 10/02/ P

58 Table of Contents Drive and Gearbox Chain Routing Part Number Index P /02/18

59 Table of Contents Part Number Index Drive Drive and Gearbox Chain Routing Ref. Part No. Part Description Comments Revision dwg C C C D C C D D D D D D Image No. HHCS 5/8-11X3 1/2 GR5 WASHER FLAT 5/8 HARD ASTMF436 SPKT IDLER BRG #50 15 TOOTH DISC SPACER TB SWING ARM 1.56 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CHAIN RL # PITCHES CHAIN RL # PITCHES CHAIN RL #40 98 PITCHES CHAIN RL # PITCHES CHAIN RL # PITCHES CHAIN RL # PITCHES Used on Pull Behind Cart Used on Pull Between Cart (Applies to 3N-4010HDA) 10/02/ P

60 Table of Contents Drive Components Part Number Index P /02/18

61 Table of Contents Part Number Index Drive Drive Components Ref. Part No. Part Description Comments Revision dwg C C C C D D C C C C C C C C C C D S D C C D C C D C C H C S C C C C C C C C C D C D Image No. HHCS 1/2-13X3 1/2 GR5 HHCS 1/2-13X4 1/4 GR5 HHCS 7/16-14X1 3/4 GR5 IDLER 1 PC 2.38X1.01X1.062 TUBE RND 1 OD X 7/32W X 2.13 TUBE RND DOM. 1 OD X 7/32WX3.0 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT RHSNB 5/16-18X3/4 GR5 FLANGETTE 52 3-BOLT PLT BRG.7/8HEX BR 52MM SPHRICAL OD NUT HEX FLG TP LK 5/16-18ZNYCR NUT LOCK 1/4-20 PLT HHCS 1/4-20X5 GR5 PLT PIN ROLL 1/4 X 1 1/2 LG PLT KEY 1/4 X 3/16 X 3.80 AIR DRILL CLUTCH SHAFT LOCK COLLAR, 7/8 HEX W/ SET SC BUSHING 1 1/8 ODX7/8 HEX BORE HSHCS M8X1.25X30 GR8.8 PLT SPKT 50A25 CLUTCH METRIC BORE CLUTCH SPROCKET SPACER OGURA CLUTCH SPKT 40B22 7/8 HEX BORE & SS SPKT 40B23 X 7/8 HEX B W/ SS SPKT 40C20 X 7/8 HEX BORE SPKT 40B24 7/8 HEX BORE W/SS AIR DRILL CALIBRATION CRANK PIN WIRE RETAINING 1/4 X 1 3/4 IDLER WITH BUSHINGS SNAP RING EXT 1 HEAVY NUT HEX FLANGE LOC 7/16-14 PLT SPRING EXT. 1.0ODX5.OLX.095MW WASHER FLAT 7/16 SAE PLT HHCS 7/16-14X3 GR5 HHCS 5/16-18X2 GR5 WASHER FLAT 5/16 USS PLT NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT CLUTCH OIL SHIELD BUTTON PLUG 7/8 ROUND HOLE PSS IDLER INNER PIVOT TUBE Used with FCA4500 Used with NTA3010 and FCA4500. Used with 3N-4010HDA Used with NTA3510 and CTA /02/ P

62 Table of Contents Auger Assembly (S/N A1159T-) Part Number Index P /02/18

63 Table of Contents Part Number Index Auger Auger Assembly (S/N A1159T-) Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H H H H C C C C D C C C C C C C C C C C C C C C C D H C C D C C C C D D D C C C C C C C C C C H Image No. AUGER MOUNT WELDMENT AUGER MOUNT PIVOT ARM - INSIDE AUGER PIVOT ARM - OUTSIDE AUGER PIVOT BRACKET WELDMENT AUGER REAR CARRIER AUGER REAR CARRIER PULL BEHIND AIR DRILL 18' AUGER AIR DRILL 20' AUGER REAR AUGER TRANSPORT LATCH WLD AUGER FRONT CARRIER AUGER FRNT CARRIER PULL BEHIND FRNT AUGER TRANSPORT LATCH WLD 8 INCH AUGER CLAMP PAD 8 INCH AUGER REST PAD RING, SPLIT 1-1/4 I.D. SPRING COMP 1/2 OD X.052 W PLUNGER LOCK PIN HHCS 1/2-13X2 1/2 GR5 NUT LOCK 1/2-13 PLT WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT WASHER FLAT 1/2 USS PLT HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT SCREW PAN HD 1/4-20 X 3/4 AUGER LATCH CLAMP HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT VALVE 4 WAY 3 POS OP CEN DIR PIN ROLL 5/16 X 1 1/4 PLT HHCS 5/16-18X2 1/2 GR5 AUGER VALVE LINK COUPLER AUGER LINKAGE WELDMENT BLACK VINYL GRIP NUT LOCK 5/16-18 PLT AUGER HOSE SUPPORT CLAMP SPRING RESET HOE CLAMP 8 INCH WORM DRIVE 8 IN AUGER DISCHARGE HOSE HYD MOTOR 7/8 ORBF 8 A.D. AUGER HOPPER W/HOLES HOPPER BACKUP PLATE AUGER STRAP HANDLE HHCS 5/16-18X2 GR5 WASHER FLAT 5/16 USS PLT HHCS 5/16-18X1 GR5 NUT HEX 3/4-10 PLT NYLOCK GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X5 GR5 HHCS 3/4-10X8 GR5 PLT WASHER FLAT 3/4 HARD USS BUSHING 1 X 3/4 X 1 PIN ROLL 5/32 X 1 PIN RELEASE HANDLE (S/N A1157T-) Applies to Pull Between Cart only Applies to Pull Behind Cart only Applies to Pull Between Cart only Applies to Pull Behind Cart only Applies to Pull Between Cart only Applies to Pull Behind Cart only Refer to "Valve 4 Way ( C)" for breakdown 10/02/ P

64 Table of Contents Part Number Index Auger Assembly (S/N A1159T-) (continued) Ref Part No C C C D C C C C D C C C C Part Description WASHER LOCK SPRING 3/4 PLT HHCS 3/4-10X6 1/2 GR5 PIN ROLL 3/16X1 1/4 PLT AUGER MOUNT MAIN PIVOT PIN HHCS 1/4-20X1 3/4 GR5 NUT-LOCK 1/4-20 PLT MARKER LOCK SPRING NUT LOCK 3/8-16 NYLON INSERT CHAIN SWING LOCK ACTUATOR 90' CHAIN LINK SNAP 1/4 PLT 1.25 WIRING AND TUBE CLIP HHCS 3/8-16X3/4 GR5 AUGER FLIGHTING BUSH - BRONZE Comments Revision P /02/18

65 Table of Contents Part Number Index Auger Auger Assembly (S/N A1159T-) (continued) This Page Intentionally Left Blank 10/02/ P

66 Table of Contents Part Number Index Auger Assembly (S/N A1160T - A1172T) and all ADC2350E P /02/18

67 Table of Contents Part Number Index Auger Auger Assembly (S/N A1160T - A1172T) and all ADC2350E Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H H H C C C C D C C C C C C C C C C C C C C C C D H C C D C C C C D D D C C C C C C C C C C H Image No. AUGER MOUNT WELDMENT AUGER MOUNT PIVOT ARM - INSIDE AUGER PIVOT ARM - OUTSIDE 20' AUGER PIVOT MOUNT WELDMENT 18' AUGER PIVOT MOUNT WELDMENT AUGER REAR CARRIER 8" AIR DRILL AUGER X 18' 8" AIR DRILL AUGER X 20' REAR AUGER TRANSPORT LATCH WLD AUGER FRONT CARRIER FRNT AUGER TRANSPORT LATCH WLD 8 INCH AUGER CLAMP PAD 8 INCH AUGER REST PAD RING, SPLIT 1-1/4 I.D. SPRING COMP 1/2 OD X.052 W PLUNGER LOCK PIN HHCS 1/2-13X2 1/2 GR5 NUT LOCK 1/2-13 PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER FLAT 1/2 USS PLT HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT ELEVATOR BOLT 1/4-20X3/4 PLT AUGER LATCH CLAMP HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT VALVE 4 WAY 3 POS OP CEN DIR PIN ROLL 5/16 X 1 1/4 PLT HHCS 5/16-18X2 1/2 GR5 AUGER VALVE LINK COUPLER AUGER LINKAGE WELDMENT BLACK VINYL GRIP NUT LOCK 5/16-18 PLT AUGER HOSE SUPPORT CLAMP SPRING RESET HOE CLAMP 8 INCH WORM DRIVE 8 IN AUGER DISCHARGE HOSE HYD MOTOR 7/8 ORBF 8 A.D. AUGER HOPPER W/HOLES HOPPER BACKUP PLATE AUGER STRAP HANDLE HHCS 5/16-18X2 GR5 WASHER FLAT 5/16 USS PLT HHCS 5/16-18X1 GR5 NUT HEX 3/4-10 PLT NYLOCK GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X5 GR5 HHCS 3/4-10X8 GR5 PLT WASHER FLAT 3/4 HARD ASTMF436 BUSHING 1 X 3/4 X 1 PIN ROLL 5/32 X 1 PIN RELEASE HANDLE Applies to Pull Behind Cart only (S/N A1158T+) Applies to Pull Between Cart only Applies to Pull Between Cart only Applies to Pull Between Cart only Applies to Pull Behind Cart only Applies to Pull Between Cart only Applies to Pull Between Cart only Applies to Pull Between Cart only Refer to "Valve 4Way ( C)" for breakdown 10/02/ P