Parts Manual. Sub-Soiler Inline Ripper SS1300 & SS1700. Copyright 2017 Printed 06/28/ P

Size: px

Start display at page:

Julie Edwards
5 years ago
Views:

When you see this symbol, the subsequent instructions and warnings are serious - follow without

1 Table of Contents Part Number Index Parts Manual SS1300 & SS1700 Sub-Soiler Inline Ripper Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 06/28/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Center Frame Assembly 1300 (S/N 1932YY+)...6 Center Frame Assembly 1700 (S/N 1932YY+)...8 Center Frame Assembly (S/N 1931YY-)...10 Lights (S/N GP-2368YY+)...12 Lights (S/N 1932YY YY)...14 Lights (S/N 1931YY-)...16 Section 3: Transport...18 Gauge Wheel Assembly (S/N YY1130+)...18 Gauge Wheel Assembly (S/N YY1129-)...20 Section 4: Shanks & Coulter...22 Spring Reset Shank Mount Assembly ( K S/N 1742YY+)...22 Auto Reset Shank Mount Assembly (S/N 1741YY-)...24 Rigid Shank Mount Assembly (S/N 1932YY+)...26 Rigid Shank Mount Assembly (S/N 1931YY-)...28 Rigid Shank Mount Assembly ( K) (S/N 1932YY+)...30 Rigid Shank Mount Assembly ( K) (S/N 1931YY-) /4" Shanks & Tips Assembly /4" Shanks & Tips Assembly ( A) /4" No-Till Shank & Tip Assembly /4" No-Till Shank & Tip Assembly ( A)...40 Coulter Assembly...42 Coulter Assembly ( L)...44 Section 5: Decals...46 Decals (S/N GP-2368YY+)...46 Decals (S/N GP-2367YY-)...48 Section 6: Optional...50 Berm Conditioner (S/N 1932YY+)...50 Berm Conditioner (S/N 1931YY-)...52 Part Number Index...54 Copyright 2017 All rights reserved Printed 06/28/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /28/17

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 1 1 1/4" Shanks & Tips Assembly /4" Shanks & Tips Assembly ( A) /4" No-Till Shank & Tip Assembly /4" No-Till Shank & Tip Assembly ( A)...40 A Auto Reset Shank Mount Assembly (S/N 1741YY-)...24 B Berm Conditioner (S/N 1931YY-)...52 Berm Conditioner (S/N 1932YY+)...50 C Center Frame Assembly (S/N 1931YY-)...10 Center Frame Assembly 1300 (S/N 1932YY+)...6 Center Frame Assembly 1700 (S/N 1932YY+)...8 Coulter Assembly...42 Coulter Assembly ( L)...44 D Decals (S/N GP-2367YY-)...48 Decals (S/N GP-2368YY+)...46 G Gauge Wheel Assembly (S/N YY1129-)...20 Gauge Wheel Assembly (S/N YY1130+)...18 L Lights (S/N 1931YY-)...16 Lights (S/N 1932YY YY)...14 Lights (S/N GP-2368YY+)...12 R Rigid Shank Mount Assembly ( K) (S/N 1931YY-)...32 Rigid Shank Mount Assembly ( K) (S/N 1932YY+)...30 Rigid Shank Mount Assembly (S/N 1931YY-)...28 Rigid Shank Mount Assembly (S/N 1932YY+)...26 S Spring Reset Shank Mount Assembly ( K S/N 1742YY+) /28/ P

4 Table of Contents P Part Number Index -4-06/28/17

5 Table of Contents Part Number Index 06/28/ P

6 Table of Contents Part Number Index Center Frame Assembly 1300 (S/N 1932YY+) (Applies to SS1300 only) P /28/17

7 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly 1300 (S/N 1932YY+) (Applies to SS1300 only) Ref. Part No. Part Description Comments Revision dwg H H C C C H C H H H C C C D C C D C C C D H C D C A H H C C C D C C C C C C H C C C Image No. 3PT RIPPER 132" FRAME RIPPER STAND MOUNT U-BOLT 1/2-13 X 6 1/32 X 5 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT STAND WELDMENT PIN WIRE SNAP LOCK 1/2 X 3 1/2 3PT RIPPER 30" FRAME EXTENSION 3PT RIPPER 20" FRAME EXTENSION 3PT RIPPER 40" FRAME EXTENSION HHCS 5/8-11X2 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT BUSHING - CAT 4 UPPER PIN HITCH 1 1/4 X 4 1/2 PIN HAIR COTTER.243 WIRE PLT 20P CAT3 HITCH PIN BUSHING PIN HITCH 1 7/16 X 8 3/8 PLT BUSHING CYL 1 1/4 X 1 X 1 PIN HITCH 1 X 4 1/2 USABLE LG 20P LOWER HITCH BUSHING HITCH PIN SUPPORT INSERT PIN HITCH 1 1/8 x 8 1/2 SP HD PIN 1 1/2 X 7 1/2 USEABLE, PLT PIN COTTER 7/32 X 2 RIPPER CAT 2 HITCH PIN KIT SHANK SET BACK MOUNT SET BACK MOUNT CLAMP HHCS 7/8-9X8 GR5 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT SMV MOUNT BAR DECAL SLOW MOVING-GALV. BACKED SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT MANUAL PAK TUBE CLAMP WORM DRIVE (3"-5") 3PT RIPPER 132" FRAME MANUAL PAK 1' W/ GASKET MINI END WHEELS PRESS WHEEL HHCS 1/4-20X1 GR5 36", 38" & 40" Spacing Shown Includes items " & 30" Spacing 06/28/ P

8 Table of Contents Part Number Index Center Frame Assembly 1700 (S/N 1932YY+) (Applies to SS1700 only) P /28/17

9 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly 1700 (S/N 1932YY+) (Applies to SS1700 only) Ref. Part No. Part Description Comments Revision dwg H H C C C H C H H H C C C D C C D C C C D H C D C A H H C C C D C C C C C C H C C C Image No. 3PT RIPPER 170" FRAME RIPPER STAND MOUNT U-BOLT 1/2-13 X 6 1/32 X 5 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT STAND WELDMENT PIN WIRE SNAP LOCK 1/2 X 3 1/2 3PT RIPPER 20" FRAME EXTENSION 3PT RIPPER 30" FRAME EXTENSION 3PT RIPPER 40" FRAME EXTENSION HHCS 5/8-11X2 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT BUSHING - CAT 4 UPPER PIN HITCH 1 1/4 X 4 1/2 PIN HAIR COTTER.243 WIRE PLT 20P CAT3 HITCH PIN BUSHING PIN HITCH 1 7/16 X 8 3/8 PLT BUSHING CYL 1 1/4 X 1 X 1 PIN HITCH 1 X 4 1/2 USABLE LG 20P LOWER HITCH BUSHING HITCH PIN SUPPORT INSERT PIN HITCH 1 1/8 x 8 1/2 SP HD PIN 1 1/2 X 7 1/2 USEABLE, PLT PIN COTTER 7/32 X 2 RIPPER CAT 2 HITCH PIN KIT SHANK SET BACK MOUNT SET BACK MOUNT CLAMP HHCS 7/8-9X8 GR5 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT SMV MOUNT BAR DECAL SLOW MOVING-GALV. BACKED SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT MANUAL PAK TUBE CLAMP WORM DRIVE (3"-5") 3PT RIPPER 158" FRAME MANUAL PAK 1' W/ GASKET MINI END WHEELS PRESS WHEEL HHCS 1/4-20X1 GR5 Shown 36", 38" & 40" Spacing Shown Includes items " & 30" Spacing 06/28/ P

10 Table of Contents Center Frame Assembly (S/N 1931YY-) Part Number Index P /28/17

11 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly (S/N 1931YY-) Ref. Part No. Part Description Comments Revision dwg H H H C C C H C H H H C C C D C C D C C C D H C D C A H H C C C D C C C C C C Image No. 3PT RIPPER 170" FRAME 3PT RIPPER 132" FRAME RIPPER STAND MOUNT U-BOLT 1/2-13 X 6 1/32 X 5 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT STAND WELDMENT PIN WIRE SNAP LOCK 1/2 X 3 1/2 3PT RIPPER 20" FRAME EXTENSION 3PT RIPPER 30" FRAME EXTENSION 3PT RIPPER 40" FRAME EXTENSION HHCS 5/8-11X2 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT BUSHING - CAT 4 UPPER PIN HITCH 1 1/4 X 4 1/2 PIN HAIR COTTER.243 WIRE PLT 20P CAT3 HITCH PIN BUSHING PIN HITCH 1 7/16 X 8 3/8 PLT BUSHING CYL 1 1/4 X 1 X 1 PIN HITCH 1 X 4 1/2 USABLE LG 20P LOWER HITCH BUSHING HITCH PIN SUPPORT INSERT PIN HITCH 1 1/8 x 8 1/2 SP HD PIN 1 1/2 X 7 1/2 USEABLE, PLT PIN COTTER 7/32 X 2 RIPPER CAT 2 HITCH PIN KIT SHANK SET BACK MOUNT SET BACK MOUNT CLAMP HHCS 7/8-9X8 GR5 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT SMV MOUNT BAR DECAL SLOW MOVING-GALV. BACKED SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT MANUAL PAK TUBE CLAMP WORM DRIVE (3"-5") Shown Shown Includes items , 6 & 8 Shanks on 24" only 4, 6 & 8 Shanks on 24" only 4, 6 & 8 Shanks on 24" only 4, 6 & 8 Shanks on 24" only 4, 6 & 8 Shanks on 24" only 06/28/ P

12 Table of Contents Lights (S/N GP-2368YY+) Part Number Index (Applies to SS1300 only) P /28/17

13 Table of Contents Part Number Index Section 2: Frames Lights (S/N GP-2368YY+) (Applies to SS1300 only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C H H C C C D C ImageNo. LIGHT HARNESS, 5' LEAD - LED LIGHT HRNSS ENHANCE MODULE LED LIGHT HRNSS, 12' WISHBONE LED LIGHT, RED LAMP - LED LIGHT, AMBER LAMP LED HHCS 1/4-20X1 1/4 GR5 NUT-LOCK 1/4-20 PLT HHCS 1/2-13X1 1/2 GR5 LIGHT BRACKET - LH LIGHT BRACKET - RH U-BOLT 1/2-13 X 6 1/32 X 5 1/2 WSHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT LIGHT MOUNTING BRACKET HHCS 1/4-20X1 1/5 GR5 Use with C to secure enhance module to frame 06/28/ P

14 Table of Contents Lights (S/N 1932YY YY) Part Number Index P /28/17

15 Table of Contents Part Number Index Section 2: Frames Lights (S/N 1932YY YY) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D D C C C ImageNo. LIGHT HARNESS, 5' LEAD - LED LIGHT HRNSS ENHANCE MODULE LED LIGHT HARNESS 15' WISHBONE LED LIGHT, RED LAMP - LED LIGHT, AMBER LAMP LED HHCS 1/4-20X1 1/4 GR5 NUT-LOCK 1/4-20 PLT WASHER FLAT 1/4 SAE PLT AG LIGHT MOUNT BRACKET AG LIGHT MOUNT BRACKET U-BOLT 1/2-13 X 6 1/32 X 5 1/4 WSHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 06/28/ P

16 Table of Contents Lights (S/N 1931YY-) Part Number Index P /28/17

17 Table of Contents Part Number Index Section 2: Frames Lights (S/N 1931YY-) Ref. Part No. Part Description Comments Revision dwg D D C C C C C C C C C Image No. AG LIGHT MOUNT BRACKET AG LIGHT MOUNT BRACKET U-BOLT 1/2-13 X 6 1/32 X 5 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DUAL AG LIGHTS LH DUAL AG LIGHTS RH SCREW HEX SELF TAP 1/4-20X3/4 SCR HEX SELF TAP 1/4-20X1TYPEF LIGHT HARNESS, 15' WISHBONE LIGHT HARNESS, 5' LEAD Replaced by C Rev. 2 Rev. 1 06/28/ P

18 Table of Contents Gauge Wheel Assembly (S/N YY1130+) Part Number Index P /28/17

19 Table of Contents Part Number Index Section 3: Transport Gauge Wheel Assembly (S/N YY1130+) Ref. Part No. Part Description Comments Revision dwg H C C C H C C C C C C C C H C C S C C C K K C C C H H C C C C D D C Image No. GW EXT MOUNT HHCS 5/8-11X2 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT RIPPER GUAGE WHEEL MOUNT U-BOLT 5/8-11 X 6 1/32 X 5 3/4 SCREW JACK 2000# TP-WND A-FRAM HHCS 7/16-14X1 1/4 GR5 PLT NUT HEX FLANGE LOC 7/16-14 PLT HHCS 3/8-16X2 3/4 GR5 HHCS 7/16-14X2 3/4 GR5 NUT LOCK 3/8-16 PLT NUT HEX LOCK 7/16-14 PLT RIPPER GUAGE WHEEL ARM PIN BENT 1 X 4 3/4 W/HAIRPIN PIN ROLL 1/2 X 3 LG. PLT RIPPER GUAGE WHEEL HUB ASY WHEEL 10X6 6/6 62PH18 INSET BK WHEEL 10X6 6/6 62 PH.18INSET TIRE 20.5 X 0-10 LRE TIRE 20.5 X 8 10 PLY 6 BLT BKSN TIRE 20.5 X 8 10 PLY 6 BOLT BOLT, WHL 9/16-18X1 1/2 GR5 HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT RIPPER HUB SPINDLE WELDMENT RIPPER HUB SPINDLE WELDMENT BRG CONE 1.50ID 13600LA90028 BRG CUP GREASE ZERK 1/4-28 X 45-DEG HUB ASSY 6 BOLT 4 5/8 PILOT SPINDLE SLEEVE SPINDLE SLEEVE NUT HEX JAM 1 1/2-12 PLT 6 Shank on 24" only 6 Shank on 24" only 6 Shank on 24" only 6 Shank on 24" only Replaced by C Replaced by C Includes items 19, (S/N 2127YY+) (S/N 2126YY-) (S/N 2127YY+) (S/N 2126YY-) (S/N YY1130+) (S/N YY1129-) (S/N YY1130+) (S/N YY1129-) Rev. 2 Rev. 1 Rev. 2 Rev. 1 Rev. 2 Rev. 1 Rev. 2 Rev. 1 06/28/ P

20 Table of Contents Gauge Wheel Assembly (S/N YY1129-) Part Number Index P /28/17

21 Table of Contents Part Number Index Section 3: Transport Gauge Wheel Assembly (S/N YY1129-) Ref. Part No. Part Description Comments Revision dwg H C C C H C C C K C C C Image No. RIPPER GUAGE WHEEL ARM PIN BENT 1 X 4 3/4 W/HAIRPIN HHCS 5/8-11X2 1/4 GR5 U-BOLT 5/8-11 X 6 1/32 X 5 3/4 RIPPER GUAGE WHEEL MOUNT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT PIN ROLL 1/2 X 3 LG. PLT TIRE 20.5 X 8 10 PLY 6 BOLT HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT DECAL CAUTION TIRE 90 PSI/120 See Gauge Wheel (S/N YY1130+) for parts break down See Gauge Wheel (S/N YY1130+) for parts break down 06/28/ P

22 Table of Contents Part Number Index Spring Reset Shank Mount Assembly ( K S/N 1742YY+) P /28/17

23 Table of Contents Part Number Index Section 4: Shanks & Coulter Spring Reset Shank Mount Assembly ( K S/N 1742YY+) Ref. Part No. Part Description Comments Revision dwg H C H C C C C C C C C C C C H D C S D C C C C C C Image No. SHANK MOUNT SPRING RESET MOUNT CLAMP CASTING MOUNT CLAMP HHCS 1-8X3 GR8 WASHER FLAT 1 HARD PLT WASHER FLAT 1 HARD ASTMF436 PN WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT SHANK WEAR BLOCK HHCS 3/8-16X1 GR5 PAN HD 5/ LG PHILLPS PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 5/16 PLT SLEEVE BEARING 1 5/8 I.D. SPRING RESET SHANK PIVOT ARM PIVOT TUBE HHCS 1-8X8 5/8 GR5 SPTHD PLT SPRING RESET SPRING SUBASSY PIN - 1IN DIA. WASHER MACH 1.5X1.00X.075 SNAP RING EXT 1 HEAVY HHCS 3/4-10X6 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT (S/N 1932YY+) (S/N 1931YY-) Replaced by C Replaced by C Replaced by C DO NOT DISASSEMBLE SPRING PACK. 06/28/ P

24 Table of Contents Part Number Index Auto Reset Shank Mount Assembly (S/N 1741YY-) P /28/17

25 Table of Contents Part Number Index Section 4: Shanks & Coulter Auto Reset Shank Mount Assembly (S/N 1741YY-) Ref. Part No. Part Description Comments Revision dwg H H C C C C C C H C C S C C C C H H H D D A A C C C C Image No. SHANK MOUNT SPRING RESET MOUNT CLAMP HHCS 3/4-10X3 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT BUSHING 1.25ODX1.00IDX2.00 GREASE ZERK STRAIGHT 1/4-28 SPRING RESET SHANK PIVOT ARM HHCS 1-8X8 5/8 GR5 SPTHD PLT NUT HEX TOP LOCK 1-8 PLT SPRING RESET SPRING SUBASY HHCS 5/8-11X8 1/2 GR5 Replaced by C WASHER FLAT 5/8 HARD ASTMF436 NUT LOCK 5/8-11 PLT SHANK HOLDER 1 1/4 SHANK HOLDER 1 1/4, Replaced by H SHANK HOLDER 3/4 SPACER BUSHING SPACER BUSHING SHANK HOLDER 1 1/4 SUB ASSY SHANK HOLDER 3/4 SUB ASY HHCS 3/4-10X6 GR8 HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 DO NOT DISASSEMBLE SPRING PACK Used in A Used in A Used in A Used in A Includes items 4, 16-17, for 1 1/4" Straight & Parabloic Shanks Includes items 4, 16-17, for 3/4" No-Till Shanks Rev. 2 Rev. 1 Rev. 2 Rev. 1 06/28/ P

26 Table of Contents Part Number Index Rigid Shank Mount Assembly (S/N 1932YY+) P /28/17

27 Table of Contents Part Number Index Section 4: Shanks & Coulter Rigid Shank Mount Assembly (S/N 1932YY+) Ref. Part No. Part Description Comments Revision dwg H C C C C C H H D D A A C C C C C C C C C Image No. SHANK MOUNT, RIGID MOUNT CLAMP CASTING HHCS 1-8X3 GR8 WASHER FLAT 3/4 HARDENED STEEL WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SHANK HOLDER 1 1/4 SHANK HOLDER 3/4 SPACER BUSHING SPACER BUSHING SHANK HOLDER 1 1/4 SUB ASSY SHANK HOLDER 3/4 SUB ASY HHCS 3/4-10X6 GR8 HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 NUT LOCK 5/8-11 PLT WASHER FLAT 1 HARD PLT WASHER FLAT 1 HARD ASTMF PN WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT Used in A Used in A Used in A Used in A Includes items 4, 7-8, for 1 1/4" Straight & Parabloic Shanks Includes items 4, 7-8, for 3/4" No-Till Shanks Replaced by C 06/28/ P

28 Table of Contents Part Number Index Rigid Shank Mount Assembly (S/N 1931YY-) P /28/17

29 Table of Contents Part Number Index Section 4: Shanks & Coulter Rigid Shank Mount Assembly (S/N 1931YY-) Ref. Part No. Part Description Comments Revision dwg H H C C C C H H H D D A A C C C C C Image No. SHANK MOUNT, RIGID MOUNT CLAMP HHCS 3/4-10X3 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SHANK HOLDER 1 1/4 SHANK HOLDER 1 1/4, Replaced by H SHANK HOLDER 3/4 SPACER BUSHING SPACER BUSHING SHANK HOLDER 1 1/4 SUB ASSY SHANK HOLDER 3/4 SUB ASY HHCS 3/4-10X6 GR8 HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 NUT LOCK 5/8-11 PLT Used in A Used in A Used in A Used in A Includes items 4, 7-8, for 1 1/4" Straight & Parabloic Shanks Includes items 4, 7-8, for 3/4" No-Till Shanks 06/28/ P

30 Table of Contents Part Number Index Rigid Shank Mount Assembly ( K) (S/N 1932YY+) P /28/17

31 Table of Contents Part Number Index Section 4: Shanks & Coulter Rigid Shank Mount Assembly ( K) (S/N 1932YY+) Ref. Part No. Part Description Comments Revision dwg H C C C C C C C C C C Image No. SHANK MOUNT, RIGID MOUNT CLAMP CASTING HHCS 1-8X3 GR8 WASHER FLAT 3/4 HARDENED STEEL WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X6 GR8 WASHER FLAT 1 HARD PLT WASHER FLAT 1 HARD ASTMF PN WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT Replaced by C 06/28/ P

32 Table of Contents Part Number Index Rigid Shank Mount Assembly ( K) (S/N 1931YY-) P /28/17

33 Table of Contents Part Number Index Section 4: Shanks & Coulter Rigid Shank Mount Assembly ( K) (S/N 1931YY-) Ref. Part No. Part Description Comments Revision dwg H H C C C C C Image No. SHANK MOUNT, RIGID MOUNT CLAMP HHCS 3/4-10X3 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X6 GR8 06/28/ P

34 Table of Contents 1 1/4" Shanks & Tips Assembly Part Number Index P /28/17

35 Table of Contents Part Number Index Section 4: Shanks & Coulter 1 1/4" Shanks & Tips Assembly Ref. Part No. Part Description Comments Revision dwg C D C C C C C H C C C C C C C Image No. SHANK STRAIGHT 1 1/4 SPACER BUSHING WASHER FLAT 3/4 HARD ASTMF436 HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 NUT LOCK 5/8-11 PLT WEAR SHIN RETAINER 1 1/4 STRT WEAR SHIN 1 1/4" STRAIGHT TIP 1 1/4" X 2" WITH FIN TIP 1 1/4" X 7" WITH FIN TIP 1 1/4" X 2" RAISED CENTER TIP 1 1/4" X 7" RAISED CENTER HHCS 1/2-13X2 1/2 GR5 NUT HEX FLG LOCK 1/2-13 PLT 06/28/ P

36 Table of Contents Part Number Index 1 1/4" Shanks & Tips Assembly ( A) P /28/17

37 Table of Contents Part Number Index Section 4: Shanks & Coulter 1 1/4" Shanks & Tips Assembly ( A) Ref. Part No. Part Description Comments Revision dwg H C C C C C D C C C C H C C C C A C C C C Image No. SHANK HOLDER 1 1/4 HHCS 3/4-10X6 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT LOCK 3/8-16 PLT SHANK STRAIGHT 1 1/4 SPACER BUSHING HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 NUT LOCK 5/8-11 PLT WEAR SHIN RETAINER 1 1/4 STRT HHCS 1/2-13X2 1/2 GR5 WASHER FLAT 1/2 USS HARD PLT NUT HEX FLG LOCK 1/2-13 PLT WEAR SHIN 1 1/4" STRAIGHT SHANK AND SHIN 1 1/4 STRAIGHT TIP 1 1/4" X 2" WITH FIN TIP 1 1/4" X 7" WITH FIN TIP 1 1/4" X 2" RAISED CENTER TIP 1 1/4" X 7" RAISED CENTER Includes items /28/ P

38 Table of Contents 3/4" No-Till Shank & Tip Assembly Part Number Index P /28/17

39 Table of Contents Part Number Index Section 4: Shanks & Coulter 3/4" No-Till Shank & Tip Assembly Ref. Part No. Part Description Comments Revision dwg C D C C C C C D C CP C C D C Image No. SHANK NO-TILL 3/4 SPACER BUSHING WASHER FLAT 3/4 HARD ASTMF436 HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 NUT LOCK 5/8-11 PLT RETAINER CLIP 3/4" NT WEAR SHIN 3/4" NO TILL TIP 3/4" NO TILL LOW WING HHCS 1/2-13X1 3/4 GR5 NUT LOCK 1/2-13 PLT PIN SPIROL 3/4 X 1.7 LONG HVY PIN SPIROL 1/2 X 1 3/4 06/28/ P

40 Table of Contents Part Number Index 3/4" No-Till Shank & Tip Assembly ( A) P /28/17

41 Table of Contents Part Number Index Section 4: Shanks & Coulter 3/4" No-Till Shank & Tip Assembly ( A) Ref. Part No. Part Description Comments Revision dwg H C C C C C D C C C C D C C C D C A D CP Image No. SHANK HOLDER 3/4 HHCS 3/4-10X6 GR8 WASHER FLAT 3/4 HARD ASTMF436 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SHANK NO-TILL 3/4 SPACER BUSHING HHCS 3/4-10X4 GR5 NUT LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 NUT LOCK 5/8-11 PLT RETAINER CLIP 3/4" NT HHCS 1/2-13X1 3/4 GR5 NUT LOCK 1/2-13 PLT WEAR SHIN 3/4" NO TILL PIN SPIROL 3/4 X 1.7 LONG HVY PIN SPIROL 1/2 X 1 3/4 SHANK AND SHIN 3/4" NO TILL TIP 3/4" NO TILL LOW WING HF RPBY D Includes items Rev. 2 Rev. 1 06/28/ P

42 Coulter Assembly Table of Contents Part Number Index P /28/17

43 Table of Contents Part Number Index Section 4: Shanks & Coulter Coulter Assembly Ref. Part No. Part Description Comments Revision dwg D C C C D C C D C D C C C D H C S C C C H C D D D C C E C C C C C C C V C C D S C C C C C C L L C Image No. COULTER CLAMP 6H X 4W U-BOLT 5/8-11 X 6 1/32 X 5 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CLAMP PLT 6 BAR WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X6 GR5 CLAMP SHANK 1 1/2 DIA SCREW SQ HD 5/8-11 X 1 CUP PT SHANK 1 1/2D X 26 FERT COULT 1 1/2 X 22 OFFSET SHANK HHCS 5/16-18X2 GR5 NUT LOCK 5/16-18 PLT COULTER STOP RPBY D SCREW SQ HD 5/8-11 X 1 CUP PT SWIVEL COULTR CASTING ASSY, R GREASE ZERK STRAIGHT 1/4-28 NUT HEX JAM 5/8-11 PLT SCREW SET 5/8-11X1 1/2 GR8 CUP COULTER SPRING ROD WLDMT BUSHING COULTER CASTING SPRING 2.25 O.D. X.5 COIL SPRING ROD SLEEVE 1 1/8 OD COULTER SPRING WASHER NUT HEX JAM 3/4-10 PLT BUSHING 1.50ODX1.25IDX2.94 FERT COULTER SWING ARM WASHER FLAT 1 1/4 SAE PLT PIN COTTER 1/4 X 2 PLT DECAL GP PLANTING COMPONENTS SWING ARM BUSHING NUT HEX FLANGE LOCK 3/4-10 PLT NUT HEX JAM 3/4-10 PLT BRG CUP LM COULTER HUB & CUP ASSY BRG CONE 1.25ID LM OIL SEAL DOUBLE LIP HUB GREASE CAP COULTER HUB PACKAGE WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 3/4 PLT RHSNB 1/2-13X1 1/4 GR5 COULTER BLADE 20 FLUTED NUT HEX FLANGE 1/2-13 GR G PLT VAN I 20" RH COULTER ASSY SUBSOILER RH COULTER ASSY PIN SPIROL 3/8X2 1/2 PLAIN Used on 24" Spacing Only Includes items 16 & 33 Includes items Includes items & 44 Includes items Rev. 2 Rev. 1 06/28/ P

44 Table of Contents Coulter Assembly ( L) Part Number Index P /28/17

45 Table of Contents Part Number Index Section 4: Shanks & Coulter Coulter Assembly ( L) Ref. Part No. Part Description Comments Revision dwg D C C C D C C D C D C C D S C C C C C D D C C C H C C C C C V C C D S C C C C C C C L Image No. COULTER CLAMP 6H X 4W U-BOLT 5/8-11 X 6 1/32 X 5 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CLAMP PLT 6 BAR WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X6 GR5 CLAMP SHANK 1 1/2 DIA SCREW SQ HD 5/8-11X1 CUP PT SHANK 1 1/2D X 26 FERT COULT HHCS 5/16-18X2 GR5 NUT LOCK 5/16-18 PLT COULTER STOP PVT CLTR CASTING MOUNT ASY RH GREASE ZERK STRAIGHT 1/4-28 SCREW SET 5/8-11X1 1/2 GR8 CUP NUT HEX JAM 5/8-11 PLT EYE BOLT 3/4-10X14 3/4 LG SP COULTER SPRING GUIDE TUBE SPRING 2.25 O.D. X.5 COIL COULTER SPRING WASHER NUT HEX JAM 3/4-10 PLT BUSHING 1X3/4X1 1/8 FLG HD BUSHING 1.50ODX1.25IDX2.94 VAN I 20" SWING ARM WLMT WASHER MACH 1 7/8X1 1/4X 14GA SNAP RING EXT 1 1/4 HEAVY WASHER MACH 1 1/4X3/4X14GA SNAP RING 3/4 EXTERNAL HEAVY BRG CUP LM COULTER HUB & CUP ASSY BRG CONE 1.25ID LM OIL SEAL DOUBLE LIP HUB GREASE CAP COULTER HUB PACKAGE WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 3/4 PLT RHSNB 1/2-13X1 1/4 GR5 COULTER BLADE 20 FLUTED NUT HEX 1/2-13 PLT PIN SPIROL 3/8X2 1/2 PLAIN SUBSOILER RH COULTER ASSY Includes items 15 & 30 Includes items Includes items 6, /28/ P

46 Table of Contents Decals (S/N GP-2368YY+) Part Number Index P /28/17

47 Table of Contents Part Number Index Section 5: Decals Decals (S/N GP-2368YY+) Ref. Part No. Part Description Comments Revision dwgtp C C C C C C C C C C C C C C C C Image No. DECAL CAUTION GENERAL INSTR DECAL DANGER CRUSH TRCTR & 3PT DECAL WARNING 20 MPH TRANS SML DECAL SUB-SOILER 1300 DECAL - SUB-SOILER 1310 DECAL SUB-SOILER 1700 DECAL SUB-SOILER 1710 DECAL GP ON LOGO SPRAYER DECAL REFLECTOR AMBER 1 1/2X9 DECAL CAUTION TIRES NOT A STEP DECAL SUB-SOILER SHANK DEPTH DECAL CAUTION TIRE 90 PSI/120 DECAL RIPPER CLAMP BOLT TORQUE DECAL REFLECTR DAYTIME 1 1/2X9 DECAL REFLECTOR RED 1 1/2X9 DECAL FLAG Model 1300 Model 1310 Model 1700 Model /28/ P

48 Table of Contents Decals (S/N GP-2367YY-) Part Number Index P /28/17

49 Table of Contents Part Number Index Section 5: Decals Decals (S/N GP-2367YY-) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C Image No. DECAL CAUTION GENERAL INSTR DECAL DANGER CRUSH TRCTR & 3PT DECAL WARNING 20 MPH TRANS SML DECAL SUB-SOILER 1300 DECAL SUB-SOILER 1700 DECAL GP ON LOGO SPRAYER DECAL REFLECTOR AMBER 1 1/2X9 DECAL CAUTION TIRES NOT A STEP DECAL SUB-SOILER SHANK DEPTH DECAL CAUTION TIRE 90 PSI/120 DECAL RIPPER CLAMP BOLT TORQUE DECAL RIPPER CLAMP BOLT TORQUE DECAL REFLECTR DAYTIME 1 1/2X9 DECAL REFLECTOR RED 1 1/2X9 DECAL FLAG Model 1300 Model 1700 Replaced by C 06/28/ P

50 Table of Contents Berm Conditioner (S/N 1932YY+) Part Number Index P /28/17

51 Table of Contents Part Number Index Section 6: Optional Berm Conditioner (S/N 1932YY+) Ref. Part No. Part Description Comments Revision dwg H C D C D C C H C C C V H H C C C C C C C C H C C C H C C C C D D C H C Image No. BERM CONDITIONER FRAME HHCS 3/4-10X7 GR8 WASHER 3/4X3 PLATED PLASTIC SLEEVE PIVOT BUSHING WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SPRING MOUNT HHCS 1/2-13X2 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SPRING/PLUG (SHORT) SUB ASSY ADJUSTER LINK ADJUSTER LINK HHCS 1/2-13X3 1/2 GR5 NUT LOCK 1/2-13 PLT HHCS 1/2-13X6 GR5 WASHER FLAT 1/2 USS PLT CASTING - STAINLESS T-HANDLE SPRING COMP 5/8 OD X 1 3/4 LG WASHER FLAT 3/8 SAE PLT PIN COTTER 1/8 X 1 REEL BEARING HANGER SC U-BOLT 5/8-11X3 1/32X4 1/2 SPT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT BERM CONDITIONER BASKET RHSNB 1/2-13X1 1/2 GR5 BEARING FLG 1 1/2ID 5 IN SQ NUT HEX TOP LOCK 1/2-13PLT HHCS 1-8X4 GR5 1 HARDENED SPINDLE WASHER TUBE RND - 1 1/2 OD NUT HEX 1-8 NYLON INSERT PLT SPRING MOUNT STRAIGHT LEG HHCS 1/2-13X3 1/2 GR5 Used on No-Till Shanks Used on Straight Shanks 06/28/ P

52 Table of Contents Berm Conditioner (S/N 1931YY-) Part Number Index P /28/17

53 Table of Contents Part Number Index Section 6: Optional Berm Conditioner (S/N 1931YY-) Ref. Part No. Part Description Comments Revision dwg H C D C D C C H C C C V H H C C C C C C C C H C C C H C C C D D C C D D C H H C Image No. BERM CONDITIONER FRAME HHCS 3/4-10X7 GR8 WASHER 3/4X3 PLATED PLASTIC SLEEVE PIVOT BUSHING WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SPRING MOUNT HHCS 1/2-13X2 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SPRING/PLUG (SHORT) SUB ASSY ADJUSTER LINK ADJUSTER LINK HHCS 1/2-13X3 1/2 GR5 NUT LOCK 1/2-13 PLT HHCS 1/2-13X6 GR5 WASHER FLAT 1/2 USS PLT CASTING - STAINLESS T-HANDLE SPRING COMP 5/8 OD X 1 3/4 LG WASHER FLAT 3/8 SAE PLT PIN COTTER 1/8 X 1 REEL BEARING HANGER SC U-BOLT 5/8-11X3 1/32X4 1/2 SPT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT BERM CONDITIONER BASKET RHSNB 1/2-13X2 GR5 RHSNB 1/2-13X1 1/2 GR5 BRG FLG 1.50ID 4BOLT SQ 3/4 LONG X 1/2 TINE STOP/SPACR ZERK GUARD ROLLING HARROW NUT HEX TOP LOCK 1/2-13PLT HHCS 1-8X4 GR5 1 HARDENED SPINDLE WASHER TUBE RND - 1 1/2 OD NUT HEX 1-8 NYLON INSERT PLT SPRING MOUNT STRAIGHT LEG SPRING MOUNT PARABOLIC SHANK HHCS 1/2-13X3 1/2 GR5 06/28/ P

54 Table of Contents Part Number Index Part Number Index The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page H...7, 9, D...7, 9, D...7, 9, H...7, 9, D...51, D...43, H E D...43, D...43, D...43, D...43, V...43, D...43, D...43, D...43, H D S...43, S H L S D...7, 9, H...51, D...51, D V...51, D H H H...9, H...7, 9, H...7, H...7, 9, H...7, 9, H A...7, 9, K...19, H...19, H H...7, 9, S H H H H...7, 9, H...7, 9, D...7, 9, D...15, D D...7, 9, D...15, H H D K D H H H...25, 29, H...29, H...25, H...35, A A S H...25, 27, 29, A...25, 27, D...39, D...39, D D L...43, A...25, 27, H...25, 27, 29, H H H S H...27, H...51, H...51, H...51, H...51, H...51, H...51, H D...51, D...51, D...25, 27, 29, 39, D...25, 27, 29, 35, D C...25, 43, C C C C C...7, 9, C...7, 9, C...43, C C...43, C C C...7, C C...51, C...43, 51, C...7, 9, 11, 19, C... 25, 27, 29, 35, 37, 39, C...19, C... 25, 27, 29, 35, 37, 39, C...51, C...39, C C...51, C...43, C C...35, 37, 51, C C C...43, C C...13, C C C...23, 27, C C... 23, 25, 27, 29, 31, 33, 37, C...25, 29, C C...7, 9, C C...23, C...51, C C...7, 9, C...13, C...43, C...19, C...39, 41, 51, C... 7, 9, 11, 13, 15, 17, 45, 51, C... 7, 9, 11, 19, 21, 43, 45, 51, C...43, C... 25, 27, 29, 35, 37, 39, C... 25, 27, 29, 35, 37, 39, C... 23, 25, 27, 29, 31, 33, 41, 51, C...43, C...23, 27, C...51, C...43, C...7, 9, C C...35, C C C C C C...51, C...7, 9, C C C...51, C C... 7, 9, 11, 13, 15, 17, 43, 45, 51, C...51, C... 7, 9, 11, 19, 21, 43, 45, 51, C... 19, 21, 23, 25, 27, 29, 31, 33, 37, 41, 51, C...23, 27, C...7, 9, C C...43, C... 23, 25, 27, 29, 31, 33, 35, 37, 39, C C C...23, 27, C C C C...23, 27, C...43, C C...43, C...19, C...7, 9, C...7, 9, C...7, 9, C...7, 9, C...7, 9, C...7, 9, C C...7, 9, C...19, C...39, C...51, C...19, 21, 43, C...7, 9, 11, 15, C C...51, C...51, C...51, C...39, CP...39, C...23, 27, C C C C C...43, C C...7, C C...51, C C...7, C...7, 9, C C...7, 9, C...47, C...47, C...47, C...47, C...47, C...43, C C...35, C...39, C...35, C...35, C...35, C...35, C...35, C...43, C...43, C C C C C...13, C C...13, C C...13, C...13, C C C...47, C...47, C...47, C C...47, C...47, C...47, C...21, 47, C...47, C C C C C...7, 9, C C C...43, C P /28/17

55 Table of Contents Part Number Index Part Number Index (continued) Part Number Page C C C...19 dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg , 15 dwg dwg dwg dwg dwg dwg dwgtp /28/ P

56 Great Plains Mfg., Inc E. North Street Salina, Kansas USA

Parts Manual SS0300. Sub-Soiler Inline Ripper. Copyright 2017 Printed 01/18/ P

Parts Manual SS0300. Sub-Soiler Inline Ripper. Copyright 2017 Printed 01/18/ P Table of Contents Part Number Index Parts Manual Sub-Soiler Inline Ripper SS0300 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow