Parts Manual. SD2600, SD3000, & SD3300 Updated. Short Disk Update Copyright 2018 Printed 10/15/ P

Transcription

1 Table of Contents Part Number Index Parts Manual Short Disk Update 2018 SD2600, SD3000, & SD3300 Updated Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 10/15/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Hitch Assembly...6 Center Frame Assembly SD2600 & SD Center Frame Assembly SD Wing Frame Assembly...14 Level Bar Assembly...16 Center Lift Assembly...18 Light & Fold Sensor Assembly...20 Rear Light Options...22 Weight Package (Option)...24 Section 3: Transport...26 Center Walking Beam SD2600 & Center Walking Beam SD Wing Walking Beam SD Wing Walking Beam SD3000 & SD Gauge Wheels (Hydraulic)...34 Section 4: Hydraulics...36 Disk Level Hydraulic Gauge Breakdown...36 Disk Level Hydraulics...38 Hydraulic Lift System SD2600 & SD Hydraulic Lift System SD Fold Hydraulics SD Fold Hydraulics SD Fold Hydraulics SD Hydraulic Hose Grips...50 Hydraulic Cylinder ( C 4X10X1.38 ROD)...52 Hydraulic Cylinder ( C 3.75X10X1.38 ROD)...54 Hydraulic Cylinder ( C 4X30X2 ROD)...56 Hydraulic Cylinder ( C 4.5X10X2 ROD)...58 Section 5: Gangs...60 Spring Shank Assembly...60 Disk Scraper...62 Center Gangs & Dirt Shields...64 Front Gang Assemblies...66 Rear Gang Assemblies...68 Section 6: Attachments...70 Drag Arm Assembly ( K)...70 Coiltine & Drag Arm Assembly...72 Reel Assembly ( K) SD Reel Assembly ( K) SD Reel Assembly ( K) SD Roller Assembly Center Section SD2600 & SD Roller Assembly Center Section SD Roller Assembly Left Wing SD Roller Assembly Left Wing SD3000 & SD Roller Assembly Right Wing SD Roller Assembly Right Wing SD3000 & SD Packing Roller Assembly Hydraulics SD Packing Roller Assembly Hydraulics SD Packing Roller Assembly Hydraulics SD Part Number Index...98 Copyright 2018 All rights reserved Printed 10/15/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /15/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models C Center Frame Assembly SD2600 & SD Center Frame Assembly SD Center Gangs & Dirt Shields...64 Center Lift Assembly...18 Center Walking Beam SD2600 & Center Walking Beam SD Coiltine & Drag Arm Assembly...72 Roller Assembly Right Wing SD3000 & SD S Spring Shank Assembly...60 W Weight Package (Option)...24 Wing Frame Assembly...14 Wing Walking Beam SD Wing Walking Beam SD3000 & SD D Disk Level Hydraulic Gauge Breakdown...36 Disk Level Hydraulics...38 Disk Scraper...62 Drag Arm Assembly ( K)...70 F Fold Hydraulics SD Fold Hydraulics SD Fold Hydraulics SD Front Gang Assemblies...66 G Gauge Wheels (Hydraulic)...34 H Hitch Assembly...6 Hydraulic Cylinder ( C 4X10X1.38 ROD)...52 Hydraulic Cylinder ( C 3.75X10X1.38 ROD)...54 Hydraulic Cylinder ( C 4X30X2 ROD)...56 Hydraulic Cylinder ( C 4.5X10X2 ROD)...58 Hydraulic Hose Grips...50 Hydraulic Lift System SD2600 & SD Hydraulic Lift System SD L Level Bar Assembly...16 Light & Fold Sensor Assembly...20 P Packing Roller Assembly Hydraulics SD Packing Roller Assembly Hydraulics SD Packing Roller Assembly Hydraulics SD R Rear Gang Assemblies...68 Rear Light Options...22 Reel Assembly ( K) SD Reel Assembly ( K) SD Reel Assembly ( K) SD Roller Assembly Center Section SD2600 & SD Roller Assembly Center Section SD Roller Assembly Left Wing SD Roller Assembly Left Wing SD3000 & SD Roller Assembly Right Wing SD /15/ P

4 Table of Contents P Part Number Index -4-10/15/18

5 Table of Contents Part Number Index 10/15/ P

6 Hitch Assembly Table of Contents Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

7 Hitch Assembly Table of Contents Part Number Index Section 2: Frames (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp C C C C H C C C C C C D C C H C C C C C C C C C D C H C S H C C C C C C C C C D C C C C C C C C C C C H H C H Image No. DECAL-DOWN PRESSURE VALVE DECAL FOLD VALVE HHCS 1 1/4-7X8 GR8 SPTHD NUT HEX TOP LOCK 1 1/4-7 PLT LINK - SD LEVELING - U/D SLEEVE BEARING 1.25 ID X 1.5 L DECAL GP PLANTING COMPONENTS MANUAL PAK 1" W/ GASKET HHCS 1/4-20X1 GR5 MINI END WHEEL PRESS WHEEL WASHER FLAT 1 1/4 SAE PLT TRNBCKLE WRENCH 2 5/ /16 PIN LYNCH 3/16 W/COTTER/CHAIN DECAL WARNING HYD PRESS LONG HITCH FRAME WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT PIN CLVS 1.0X2.45 USBL WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 DECAL CAUTION GENERAL 4X5 DECAL DANGER ELECTROCUTION HA HHCS 1-8X6 GR8 PLT SPTHD NUT HEX TOP LOCK 1-8 PLT HHCS 1 1/4-7X8 1/2 GR8 SPTH HHCS 1-8X8 GR8 PLT SPTHD H - BRACKET NUT HEX TOP LOCK 1-8 PLT LEVEL TURNBUCKLE H-BRACKET - SD - U/D DECAL FLAG CAT 5 PERFECT HITCH DECAL GP&LOGO HARVEST/3X20 STR DECAL COUPLER STORAGE, GREEN DECAL COUPLER STORAGE, RED DECAL COUPLER STORAGE, BLACK DECAL WARNING 20 MPH TRANS LRG SQUARE SCREW JACK 7000LBS. WASHER FLAT 1 SAE SAFETY CHAIN SUPPORT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT DECAL DANGER CRUSHING HAZARD DECAL WARNING TONGUE RISING SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT HITCH BACKSTOP - CAT III HITCH BASE - CAT IV HITCH CLEVIS TURNBUCKLE SUB ASSY LH THREAD TURNBUCKLE SUB ASSY NUT HEX JAM 1 1/2-12 PLT TURNBUCKLE SUB ASSY RH THREAD Attach to mounting plate on hitch Includes items Contains C Bushings Do not use if tractor draw bar has hammer strap. Will not work with Cat 5. 10/15/ P

8 Table of Contents Hitch Assembly (continued) Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref Part No D C C C C C C Part Description 30,000LB AG SAFETY CHAIN HHCS 7/8-9X3 GR5 WASHER FLAT 7/8 USS PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT DECAL - ULTRA-DISK NUT HEX TOP LOCK 3/4-10 PLT Comments Revision P /15/18

9 Table of Contents Part Number Index Section 2: Frames Hitch Assembly (continued) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) This Page Intentionally Left Blank 10/15/ P

10 Table of Contents Part Number Index Center Frame Assembly SD2600 & SD3000 (Applies to SD2600 U/D, SD3000 U/D only) P /15/18

11 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly SD2600 & SD3000 (Applies to SD2600 U/D, SD3000 U/D only) Ref. Part No. Part Description Comments Revision dwgtp C C H H C C C H H C C H C C C C H C C C h H C H H C D C H C H C H C C C C D C Image No. CYL 4X30X2 TIE CL 3000# CYL 5X30X2 ROD (TIE) SD 30FT - FOLD CYL MNT FOLD CYL MNT-SD 26' HHCS 3/4-10X2 GR8 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT CENTER FRAME WING STOP HHCS 3/4-10X2 1/2 GR8 HHCS 3/4-10X2 3/4 GR5 GANG BAR-RC 128 DECAL NOTICE TRANSPORT LOCKS DECAL REFLECTOR AMBER 2X9 DECAL-SD3000 NUMBER DECAL-SD 26' CYL LOCK CHANNEL 2 X 9 1/2 PIN BENT.38X3.0 USBL W/PIN DECAL WARNING PINCH PT/CRUSH DECAL GP&LOGO HARVEST/3X20 STR CENTER BRACE BAR - SD26/30 GANG BAR -FC UPDATE KIT U-BOLT 3/4-10 X 5 1/32 X 5 1/2 GANG BAR-CC BACK U-BOLT GANG BAR-CC FRONT HHCS 3/4-10X3 1/4 GR8 SPACER TUBE 1.25 X.81 X 1 LG DECAL WARNING WINGS COULD FALL FOLD LOCK DECAL FOLD VALVE TRUSS-SD DECAL-DOWN PRESSURE VALVE TRUSS-SD PIN WIRE SNAP LOCK 1/2 X 3 1/2 HHCS 1-8X2 1/2 GR5 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT BRACKET PROXIMITY SENSOR Used with SD3000 Used with SD2600 Used with SD3000 Used with SD2600 Shown Used on rear center single shank gang bar only Used with the bolts to attach the gang bars to the frame 10/15/ P

12 Table of Contents Center Frame Assembly SD3300 Part Number Index (Applies to SD3300 U/D only) P /15/18

13 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly SD3300 (Applies to SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp H H C H H H H H H H C C C C C C D H C C C C C H C C C C C C H C D C D C Image No. CENTER FRAME-SD 33/36 DUAL WING LIFT FRONT-SD 33' CYL 4X30X2 TIE CL 3000# WING STOP GANG BAR FOLD LOCK GANG BAR-CC FRONT CENTER BRACE BAR - SD3300 TRUSS-SD TRUSS-SD HHCS 3/4-10X2 GR5 HHCS 5/16-18X2 1/2 GR5 WASHER LOCK SPRING 5/16 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 5/16-18X5/8 GR5 HYD HOSE CLAMP BRACKET GANG BAR-FC UPDATE KIT DECAL REFLECTOR AMBER 2X9 DECAL GP&LOGO HARVEST/3X20 STR NUMBER DECAL-SD 26' DECAL-SD3000 DECAL-SD3300 GANG BAR-CC BACK U-BOLT DECAL NOTICE TRANSPORT LOCKS HHCS 3/4-10X3 1/4 GR8 NUT HEX 3/4-10 PLT U-BOLT 3/4-10 X 5 1/32 X 5 1/2 HHCS 3/4-10X2 3/4 GR5 DECAL WARNING PINCH PT/CRUSH CYL LOCK CHANNEL 2 X 9 1/2 PIN WIRE RETAIN 5/16 X 2 1/2 SPACER TUBE 1.25 X.81 X 1 LG PIN WIRE SNAP LOCK 1/2 X 3 1/2 BRACKET PROXIMITY SENSOR Used on rear center single shank gang bar only Used with the bolts to attach the gang bars to the frame 10/15/ P

14 Table of Contents Wing Frame Assembly Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

15 Table of Contents Part Number Index Section 2: Frames Wing Frame Assembly (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp C C C D C C C C H H H H C C H H H H C C C C C C C D H H H H H H H H C H H H H H H D C C C C C C C Image No. SNAP RING EXT 1 1/4 HEAVY WASHER MACH 1 7/8X1 1/4X 14GA PIN SPIROL 3/8 X 2 1/2 PLATED PIN 1.25X8.63 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT SLEEVE BEARING 1.25 ID X 1.5 L HHCS 3/4-10X3 1/4 GR8 GANG BAR-FL GANG BAR-RL GANG BAR GANG BAR HHCS 1-14X1 3/4 GR8 NYL U-BOLT 3/4-10 X 5 1/32 X 4 1/2 SD ATTACHMENT BAR RH ATTACHMENT BAR-SD 26' SD ATTACHMENT BAR LH ATTACHMENT BAR 26' WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DECAL-SD3000 DECAL GP&LOGO HARVEST/3X20 STR DECAL, DANGER CUTTING OF FOOT HHCS 5/16-18X5/8 GR5 WASHER LOCK SPRING 5/16 PLT HYD HOSE CLAMP BRACKET SD - 30FT LH WING WING FRAME LH-SD 26' WING-SDH 30 RH WING FRAME RH-SD 26' GANG BAR-FL UPDATE KIT GANG BAR-FL UPDATE KIT GANG BAR-FR UPDATE KIT GANG BAR-FR UPDATE KIT HHCS 5/8-11X2 GR5 WING BRACE LH - SD2600 WING BRACE LH - SD30/33 WING BRACE RH - SD2600 WING BRACE RH - SD30/33 GAUGE WHEEL EXT - RH GAUGE WHEEL EXT - LH SPACER TUBE 1.25 X.81 X 1 LG HHCS 7/8-9X2 3/4GR8 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT HHCS 3/4-10X2 1/2 GR8 U-BOLT 5/8-11 X 5 1/32 X 4 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT Rear Left 26SD Rear Left 30 & 33SD Rear Right 26SD Rear Right 30 & 33SD RH. Used with SD3000. & SD3300. RH. Used with SD2600. LH. Used with SD3000. & SD3300. LH. Used with SD2600. LH. Used with SD3000. & SD3300. LH. Used with SD2600. RH. Used with SD3000. & SD3300. RH. Used with SD2600. LH Models 2600 only LH Models 3000 & 3300 RH Models 2600 only RH Models 3000 & 3300 Models 2600 only Models 3000 & 3300 Models 2600 only Models 3000 & 3300 Models 2600, 3000 & 3300 Models 2600, 3000 & 3300 Used on the 2 outside bolt locations on gauge wheel ext. Used on the 2 inside middle bolt locations on gauge wheel ext. 10/15/ P

16 Table of Contents Level Bar Assembly Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

17 Table of Contents Part Number Index Section 2: Frames Level Bar Assembly (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp A C C H C H C C C H D C H C H C S C C C C C C C D S Image No. HYDRAULIC DISK LEVEL NUT HEX JAM 1 1/2-12 PLT NUT HEX 1 1/2-6 PLT SPRING GUIDE SPRING COMP 4.5ODX1.125WX13L LEVEL BAR - SD NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X1 3/4 GR5 LEVEL BAR - SD PIN-5/8X2 7/8 HHCS 1/2-13X2 GR5 NYL H-BRACKET - SD - U/D HHCS 1/2-13X2 GR5 TORQUE TUBE-SD SLEEVE BEARING 1.25 ID X 1.5 L SD LEVELING LINK - U/D PIN CLVS HDLS 1.25X8.25 USBL HHCS 3/8-16X2 1/4 GR8 PLT NUT HEX TOP LOCK 3/8-16 PLT PIN CLVS 1.0X2.75 USBL WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 NUT HEX TOP LOCK 1 1/4-7 PLT HHCS 1 1/4-7X8 1/2 GR8 SPTH SD LEVELING LINK - U/D Option Refer to Hydraulic Disk Level for breakdown. Contains C Bushings Includes items 16 & 17 10/15/ P

18 Table of Contents Center Lift Assembly Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

19 Table of Contents Part Number Index Section 2: Frames Center Lift Assembly (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp H C C C C C C C H C C C C C C C C D H H S C C C C C C C C H C C C D D Image No. CENTER FRAME DECAL NOTICE TRANSPORT LOCKS DECAL REFLECTOR AMBER 2X9 DECAL-SD3000 NUMBER DECAL-SD 26' DECAL GP&LOGO HARVEST/3X20 STR HHCS 5/8-11X2 1/2 GR5 NUT LOCK 5/8-11 PLT DEPTH STOP TUBE-SD HHCS 5/16-18X2 GR5 WASHER LOCK SPRING 5/16 PLT HYD VALVE DEPTH CONTROL CROSS NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT NUT WELD 1/2-13 4XPROJECTION WASHER FLAT 1/2 HARD ASTMF436 SPRING COMP.75OD.12W 2.63LG DEPTH STOP ROD 1/2" THREADED DEPTH STOP BRACKET DEPTH STOP END DEPTH STOP ASSEMBLY HHCS 1/2-13X2 1/2 GR5 NUT HEX TOP LOCK 3/8-16 PLT HHCS 3/8-16X2 1/4 GR5 PIN 1.0X6.42 USBL HRD PLT SLEEVE BEARING 1.25 ID X 1.5 L PIN 1.25X5.79 USBL HRD PLT DECAL CAUTION TIRES NOT A STEP DECAL WARNING PINCH PT/CRUSH TORQUE TUBE-SD CYL REP 4.5X10X2 ROD TIE 3000# CYL REP 4.25X10X1.50 ROD (TIE) DECAL DANGER CHARGE FOLD CYL DEPTH STOP COLLAR IDX1 DEPTH STOP COLLAR IDX1 Includes items Refer to Hydraulic Cylinder ( C) for breakdown. Used with SD3000 & 3300 Refer to Hydraulic Cylinder ( C) for breakdown. Used with SD2600 Models 2600 Models 3000 & /15/ P

20 Table of Contents Light & Fold Sensor Assembly Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

21 Table of Contents Part Number Index Section 2: Frames Light & Fold Sensor Assembly (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp C C C C C C D C C C C C C C C C C C C D C C D C C H C D C H H Image No. HHCS 1/4-20X1 1/4 GR5 LIGHT, AMBER LAMP LED NUT LOCK 1/4-20 PLT HHCS 1/2-13X1 1/2 GR5 NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT SMV POST DECAL SLOW MOVING-GALV. BACKED SCREW PAN HD 1/4-20 X 3/4 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X3 3/4 GR5 LIGHT HARNSS LEAD W/ VALVE LED LIGHT HARNESS DUAL AMBER - LED CABLE TIE.19X D 50LB U-BOLT 1/2-13X3 1/32X7 1/4 HHCS 1/4-20X1 3/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT VALVE BRACKET LIGHT HRNSS ENHANCE MODULE LED DECAL REFLECTOR AMBER 2X9 BRACKET PROXIMITY SENSOR FOLD ASSIST HARNESS - LED DUAL WING LIFT FRONT-SD 33' HHCS 5/16-18X2 3/4 GR5 SMV BRACKET-SD 26' WASHER FLAT 1/2 SAE PLT TM LIGHT BRKT LF/RR TM LIGHT BRKT RF/LR Used with SD3000 & SD3300. Used with SD3000 Be sure to install proximity sensor in this location Used with Proximity Fold Sensor. Used with SD3300. Used with SD3300. Used with SD2600. Used with SD /15/ P

22 Table of Contents Rear Light Options Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

23 Table of Contents Part Number Index Section 2: Frames Rear Light Options (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp C C C C C H C C H C C C C H H D C H H C C C D C C D H H H H C C C Image No. HHCS 1/4-20X1 1/4 GR5 LIGHT, AMBER LAMP LED NUT LOCK 1/4-20 PLT DECAL REFLECTOR RED 2X9 DECAL REFLECTOR ORANGE 2X9 TM LIGHT BRKT LF/RR HHCS 1/2-13X1 1/2 GR5 LIGHT, RED LAMP - LED TM LIGHT BRKT RF/LR U-BOLT 1/2-13X3 1/32X7 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT U-BOLT 5/8-11X3 1/32X4 1/2 SPT LIGHT BRACKET LF/RR-SD LIGHT BRACKET RF/LR-SD LIGHT MOUNTING BRACKET U-BOLT 1/2-13 X 5 1/32 X 4 1/2 LIGHT BRACKET PACKING ROLLER LIGHT BRKT-SD U-BOLT 3/8-16 X 2 1/32 X 3 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT BRACKET NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT BRACKET SD ATTACHMENT BAR-CENTER ATTACHMENT BAR CENTER-SD 26/30 CENTER ATTACHMENT BAR-SD 3300 ATTACHMENT BAR CENTER-SD3300 U-BOLT 3/4-10 X 5 1/32 X 4 1/2 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT Used with SD2600 & SD3000 Used with SD3300. SD2600 & 3000 SD2600 & 3000 SD3300 SD /15/ P

24 Table of Contents Weight Package (Option) Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

25 Table of Contents Part Number Index Section 2: Frames Weight Package (Option) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg S D D C C D C C A D C C C Image No. 750 LB WEIGHT ASSEMBLY PART LB WEIGHT ASSY PART LB WEIGHT ASSY HHCS 3/4-10X12 GR5 PLT WASHER FLAT 3/4 SAE PLT PART - WEIGHT BOX WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 1500 LB TT CENTER FRAME WGT KI WEIGHT BOX STOP U-BOLT 1/2-13 X 4 1/32 X 5 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 10/15/ P

26 Table of Contents Center Walking Beam SD2600 & 3000 Part Number Index (Applies to SD2600 U/D, SD3000 U/D only) P /15/18

27 Table of Contents Part Number Index Section 3: Transport Center Walking Beam SD2600 & 3000 (Applies to SD2600 U/D, SD3000 U/D only) Ref. Part No. Part Description Comments Revision dwgtp H C C C C C C C C C C D C C H H C D C C D C C C C L C C D C C C C C C C C D D Image No. TORQUE TUBE-SD DECAL CAUTION TIRES NOT A STEP DECAL WARNING PINCH PT/CRUSH NUT HEX TOP LOCK 3/8-16 PLT PIN 1.0X6.42 USBL HRD PLT HHCS 3/8-16X2 1/4 GR5 CYL REP 4.25X10X1.50 ROD (TIE) CYL REP 4.5X10X2 ROD TIE 3000# DECAL DANGER CHARGE FOLD CYL TIRE/WHL 380/55R16.5 BUCKSKIN HUB 8-BLT SPNDL 2.75X WASHER 3ODX2.06IDX.10 BUSHING 2 1/4 OD X 2 ID X 2 LG SLEEVE BEARING 2.00 ID W/SEAL WALKING BEAM LH WALKING BEAM RH HHCS 1/2-13X3 1/2 GR5 PIN 2X17 3/4 NUT LOCK 1/2-13 PLT HHCS 1/2-13X4 GR5 AXLE SPINDLE 2.75X15.63 (60-8) SEAL GREASE 2.75X3.750X0.300 BRG CONE 2.16ID JLM HUB STUD 5/8-18X2 1/2 GR5 BRG CUP 3.54OD JLM HUB 8-BOLT ARMSTRONG 608 BRG CUP 2.89ODX.58WD #LM HHCS 1/2-13X9 1/2 GR5 1 HARDENED SPINDLE WASHER NUT HEX SLOTTED 1-14 PIN COTTER 3/16 X 1 3/4 PLT GREASE CAP X.28 NUT LUG 5/8-18 X 90 DEG PLT TIRE TITAN 380/55R16.5 VALVE STEM METAL TR-575 TUBLES WHEEL16.5X12 8BOLT 6PILOT BKSN SLEEVE BEARING 1.25 ID X 1.5 L DEPTH STOP COLLAR IDX1 DEPTH STOP COLLAR IDX1 Models SD2600. Refer to Hydraulic Cylinder ( C) for breakdown. Models SD3000. Refer to Hydraulic Cylinder ( C) for breakdown. Includes items Includes items Be sure to insall from the inside of the walking beam as shown Models 2600 Models /15/ P

28 Table of Contents Center Walking Beam SD3300 Part Number Index (Applies to SD3300 U/D only) P /15/18

29 Table of Contents Part Number Index Section 3: Transport Center Walking Beam SD3300 (Applies to SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp C C C C C C P P C C C D C C C C C C D C C H C C C C C C C C C D C C D C H H C Image No. TIRE - TITAN 440/55R18 WHEEL 18X14 8-BOLT 0 OFFST BKS VALVE STEM METAL TR-575 TUBLES 8 BOLT HUB SPINDLE 10,000 ASM SPINDLE 3.0 X SEAL 3.00 X X.5 KSLY GKN BRG CONE TIMKEN ONLY GKN BRG CUP, TIMKEN GKN HUB ASY; 8-BOLT, LBS BERAING CUP #LM BEARING CONE #LM HARDENED SPINDLE WASHER NUT HEX SLOTTED 1-14 GREASE CAP X.28 PIN COTTER 7/32 X 2 NUT HEX FLANGE 3/4-16 PLT HUB STUD 3/4-16X2 9/16 GR5 SLEEVE BEARING 2.00 ID W/ SEAL WASHER 3ODX2.06IDX.07 DECAL CAUTION TIRES NOT A STEP DECAL WARNING PINCH PT/CRUSH TORQUE TUBE CENTER SD 33/36 CYL REP 4.5X10X2 ROD TIE 3000# PIN1.0X7.52 USBL HRD PLT HHCS 3/8-16X2 1/4 GR5 NUT HEX TOP LOCK 3/8-16 PLT DECAL DANGER CHARGE FOLD CYL SLEEVE BEARING 1.25 ID X 1.5 L HHCS 3/4-10X4 1/2 GR5 NUT LOCK 3/4-10 PLT NUT LOCK 1/2-13 PLT BAR RND-2X18.50 HHCS 1/2-13X3 1/2 GR5 DECAL CAUTION TIRE 73/PSI 295 DEPTH STOP COLLAR IDX1 TIRE /WHEEL ASSY 440/55R18 BKSN WALKING BEAM CNTR LH-SD3300 WALKING BEAM CNTR RH-SD3300 BUSHING 2/14 OD X 2ID X 2LG Includes 5-17 Includes 8, 10 & 17 Includes items 1-3 Shown 10/15/ P

30 Table of Contents Wing Walking Beam SD2600 Part Number Index (Applies to SD2600 U/D only) P /15/18

31 Table of Contents Part Number Index Section 3: Transport Wing Walking Beam SD2600 (Applies to SD2600 U/D only) Ref. Part No. Part Description Comments Revision dwg C C C H H C C C C D C C C H H C C C C D C C C C C C C D C C C C C C C C C Image No. NUT HEX TOP LOCK 3/8-16 PLT HHCS 3/8-16X2 1/4 GR5 PIN 1.25X5.79 USBL HRD PLT WING FRAME LH-SD 26' WING FRAME RH-SD 26' NUT HEX JAM 1 1/4-7 PLT EYE BOLT 1 1/4 X 9 1/2 LONG SNAP RING EXT 1 HEAVY WASHER MACH 1.75 X 1.00 X 18GA PIN-1DX6.5 CYL REP 4X10X1.38 ROD (TIE) DECAL CAUTION TIRES NOT A STEP DECAL WARNING PINCH PT/CRUSH ROCKSHAFT WING LH-SD 26' ROCKSHAFT WING RH-SD 26' SLEEVE BEARING 1.25 ID X 1.5 L PIN 1.0X6.42 USBL HRD PLT NUT LOCK 1/2-13 PLT HHCS 1/2-13X4 GR5 AXLE SPINDLE 2.75X15.63 (60-8) SEAL GREASE 2.75X3.750X0.300 BRG CUP 3.54OD JLM BRG CONE 2.16ID JLM HUB STUD 5/8-18X2 1/2 GR5 HUB 608 W/CUPS 8-BOLTS 8" BC BRG CUP 2.89ODX.58WD #LM BRG CONE 1.62IDX.78WD#LM HARDENED SPINDLE WASHER NUT HEX SLOTTED 1-14 PIN COTTER 3/16 X 1 3/4 PLT GREASE CAP X.28 NUT LUG 5/8-18 X 90 DEG PLT HUB 8-BLT SPNDL 2.75X TIRE TITAN 380/55R16.5 VALVE STEM METAL TR-575 TUBLES WHEEL16.5X12 8BOLT 6PILOT BKSN TIRE/WHL 380/55R16.5 BUCKSKIN LH. Shown. RH. Refer to Hydraulic Cylinder ( C) for Breakdown. LH. Shown. RH. Includes items Includes items /15/ P

32 Table of Contents Wing Walking Beam SD3000 & SD3300 Part Number Index (Applies to SD3000 U/D, SD3300 U/D only) P /15/18

33 Table of Contents Part Number Index Section 3: Transport Wing Walking Beam SD3000 & SD3300 (Applies to SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg H H C C D C C C C C H H C C C C C C H H D C D C C C D C C C C C C C C C C C C C C C C C C Image No. SD - 30FT LH WING WING-SDH 30 RH NUT HEX JAM 1 1/4-7 PLT EYE BOLT 1 1/4 X 9 1/2 LONG PIN-1DX6.5 CYL REP 4X10X1.38 ROD (TIE) NUT HEX TOP LOCK 3/8-16 PLT HHCS 3/8-16X2 1/4 GR5 PIN 1.25X5.79 USBL HRD PLT SLEEVE BEARING 1.25 ID X 1.5 L TORQUE TUBE-SDH LH TORQUE TUBE-SDH RH DECAL CAUTION TIRES NOT A STEP DECAL WARNING PINCH PT/CRUSH PIN 1.0X6.42 USBL HRD PLT TIRE/WHL 12.5LX15 12 PLY BKSN HUB 8-BOLT SPNDL 2.25X16.5 Q45 SLEEVE BEARING 2.00 ID W/SEAL WALKING BEAM, LH WALKING BEAM, RH WASHER 3ODX2.06IDX.10 NUT LOCK 1/2-13 PLT PIN 2X17 3/4 HHCS 1/2-13X3 1/2 GR5 HHCS 5/16-18X3 1/4 GR5 NUT LOCK 5/16-18 PLT AXLE SPINDLE 2.25X16.5 Q45-8B SEAL GREASE 2.25X3.061X0.300 BRG CONE 1.78ID LM HUB STUD 5/8-18X2 1/2 GR5 BRG CUP 3.06OD LM HUB 458 W/CUPS 8-BOLT 8" BC BRG CUP LM BRG CONE 1.25ID LM WASHER FLAT 3/4 HARD USS NUT HEX SLOTTED 3/4-16 PIN COTTER 5/32 X 1 1/2 LONG GREASE CAP 2.448X.25X1.13 NUT LUG 5/8-18 X 90 DEG PLT TIRE 12.5L X PLY VALVE STEM TR415X.625X1 1/4 LG WHEEL 15X10 8 BOLT BUCKSKIN GREASE CAP X.38 BUSHING 2 1/4 OD X 2 ID X 2 LG DECAL CAUTION TIRE 52PSI/170 LH. Shown. RH. Refer to Hydraulic Cylinder ( C) for Breakdown. LH Shown. RH. Includes items Includes items LH Shown RH 10/15/ P

34 Table of Contents Gauge Wheels (Hydraulic) Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

35 Table of Contents Part Number Index Section 3: Transport Gauge Wheels (Hydraulic) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp C D C C C C C H H C C C D H D C C C D D C D D C C H H C C D C C C C C C C C C C C C C C C C C Image No. NUT HEX JAM 1 1/4-7 PLT EYE BOLT 1 1/4X9 1/2 W/KEYWAY PIN CLVS 1.0X3.13 USBL WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 CYL REP 3.75X10X1.38 ROD (TIE) BUSHING CYL 1 1/4 X 1 X 1 GAUGE WHL UPPR ARM-SDH LH GAUGE WHL UPPR ARM-SDH RH SLEEVE BEARING 1 I.D. SNAP RING EXT 1 HEAVY PIN ROLL 3/8 X 2 PLT GAUGE WHEEL PIN-1ODX6.40 GAUGE WHL LWR ARM-SDH PIN-1ODX5.88 BUSHING HARDENED 1 1/4-1-3/4 L HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT CASTER RETAINER CAP WASHER HARD 4.0X2.56X10GA SLEEVE BEARING 2 1/2 I.D. GAUGE WHEEL PIVOT MOUNT SPINDLE-PVT SDH GAUGE WHL HHCS 5/8-11X4 1/4 GR5 NUT LOCK 5/8-11 PLT GAUGE WHL PVT ARM-SDH LH GAUGE WHL PVT ARM-SDH RH HHCS 5/16-18X3 1/4 GR5 NUT LOCK 5/16-18 PLT AXLE SPINDLE 2.25X13.25 Q45-8B SEAL GREASE 2.25X3.061X0.300 BRG CONE 1.78ID LM BRG CUP 3.06OD LM HUB STUD 5/8-18X2 1/2 GR5 HUB 458 W/CUPS 8-BOLT 8" BC NUT LUG 5/8-18 X 90 DEG PLT BRG CUP LM BRG CONE 1.25ID LM WASHER FLAT 3/4 HARD USS NUT HEX SLOTTED 3/4-16 PIN COTTER 5/32 X 1 1/2 LONG GREASE CAP 2.448X.25X1.13 HUB 8-BOLT SPNDL 2.25X TIRE 12.5L X PLY WHEEL 15X10 8 BOLT BUCKSKIN VALVE STEM TR415X.625X1 1/4 LG TIRE/WHL 12.5LX15 12 PLY BKSN Refer to Hydraulic Cylinder ( C) for breakdown. LH Shown Attaches to H & H RH Attaches to H & H Attaches to H & H LH Shown RH Includes 31 &35 Includes items Includes items /15/ P

36 Table of Contents Part Number Index Disk Level Hydraulic Gauge Breakdown (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

37 Table of Contents Part Number Index Section 4: Hydraulics Disk Level Hydraulic Gauge Breakdown (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg C H C S C C H C C Image No. CYL 3.50X6X1.50 LEVEL GAUGE MOUNT HHCS 3/8-16X1 1/4 GR5 LINK NUT LOCK 3/8-16 PLT NUT HEX JAM 5/8-11 PLT GAUGE FORE AFT WASHER FLAT 3/8 SAE PLT DECAL DISK HARROW LEVELER 10/15/ P

38 Table of Contents Disk Level Hydraulics Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

39 Table of Contents Part Number Index Section 4: Hydraulics Disk Level Hydraulics (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C D C S C D Image No. CYL 3.50X6X1.50 EL 3/4MJIC 3/4MORB EL 45 3/4MORB 3/4MJIC HH3/8R /4FJIC HH3/8R /4FJIC LOCK VALVE HHCS 1/4-20X1 1/2 GR2 WASHER LOCK SPRING 1/4 PLT AD 3/4MORB 3/4MJIC HHCS 5/16-18X2 1/4 GR5 HYD HOSE CLAMP BRACKET HH3/8R /4MORB 3/4FJIC HG PAIR - RED MORB-FORB CP 3/4FORB MALE QD POPPET TYPE ORIFICE PLATE 1/16 3/4 Refer to Hydraulic Hose Crips for breakdown 10/15/ P

40 Table of Contents Part Number Index Hydraulic Lift System SD2600 & SD3000 (Applies to SD2600 U/D, SD3000 U/D only) P /15/18

41 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift System SD2600 & SD3000 (Applies to SD2600 U/D, SD3000 U/D only) Ref. Part No. Part Description Comments Revision TP C C C C C C C C C C C D C C C C C D C C C C C C C C C S C C C C C C C Image No. EL 3/4MJIC 3/4MORB CYL REP 4X10X1.38 ROD (TIE) HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC 3/4FJIC HH1/2R /4FJIC CYL REP 4.25X10X1.50 ROD (TIE) CYL REP 4.5X10X2 ROD (TIE) HH1/2R /4FJIC HHCS 5/16-18X2 1/4 GR5 WASHER LOCK SPRING 5/16 PLT DOUBLE HYD TEE BLOCK AD 3/4MORB 3/4MJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HYD HOSE CLAMP BRACKET HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X3 3/4 GR5 HHCS 5/16-18X2 GR5 PL 3/4MORB HOLLOW HEX HYD VALVE DEPTH CONTROL CROSS HH1/2R /4FJIC NUT HEX 5/16-18 PLT MANIFOLD COUNTER BAL HH1/2R /4FJIC 3/4MORB HG PAIR - BLACK MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HHCS 5/16-18X5/8 GR5 HHCS 5/16-18X2 1/2 GR5 HH1/2R /4FJIC HH1/2R /4FJIC AD 3/4MJIC 3/4MJIC CYL REP 3.75X10X1.38 ROD (TIE) Refer to Hydraulic Cylinder ( C) for breakdown Models 2600 (Reroute hose) Models 3000 (Reroute hose) Models 2600 Models 3000 Models 2600 Refer to Hydraulic Cylinder ( C) for breakdown Models 3000 Refer to Hydraulic Cylinder ( C) for breakdown Models 2600 (Reroute hose) Models 3000 (Reroute hose) Refer to Hydraulic Hose Grips for breakdown All Models 10/15/ P

42 Table of Contents Hydraulic Lift System SD3300 Part Number Index (Applies to SD3300 U/D only) P /15/18

43 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift System SD3300 (Applies to SD3300 U/D only) Ref. Part No. Part Description Comments Revision TP C C C C C C C C D C C C C D C C C C C C C C C S C C C C C C C Image No. EL 3/4MJIC 3/4MORB CYL REP 4X10X1.38 ROD (TIE) HH1/2R /4FJIC HH1/2R /4FJIC CYL REP 4.5X10X2 ROD (TIE) HH1/2R /4FJIC HHCS 5/16-18X2 1/2 GR5 WASHER LOCK SPRING 5/16 PLT DOUBLE HYD TEE BLOCK AD 3/4MORB 3/4MJIC HH1/2R2 74 3/4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HYD HOSE CLAMP BRACKET HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X3 3/4 GR5 HHCS 5/16-18X2 GR5 PL 3/4MORB HOLLOW HEX HYD VALVE DEPTH CONTROL CROSS HH1/2R /4FJIC NUT HEX 5/16-18 PLT MANIFOLD COUNTER BAL HH1/2R /4FJIC 3/4MORB HG PAIR - BLACK MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HHCS 5/16-18X5/8 GR5 HHCS5/16-18X2 1/4 GR5 HH1/2R /4FJIC HH1/2R /4FJIC AD 3/4MJIC 3/4MJIC CYL REP 3.75X10X1.38 ROD (TIE) Refer to Hydraulic Cylinder ( C) for breakdown (Reroute hose) Refer to Hydraulic Cylinder ( C) for breakdown (Reroute hose) Refer to Hydraulic Hose Grips for breakdown All Models 10/15/ P

44 Table of Contents Fold Hydraulics SD2600 Part Number Index (Applies to SD2600 U/D only) P /15/18

45 Table of Contents Part Number Index Section 4: Hydraulics Fold Hydraulics SD2600 (Applies to SD2600 U/D only) Ref. Part No. Part Description Comments Revision dwg C C C C D C C C C C C C C C C C C C C C C C C C C D S C D C Image No. CYL 5X30X2 ROD (TIE) EL 3/4MJIC 3/4MORB AD 3/4MORB 3/4MJIC HHCS 5/16-18X3 3/4 GR5 DOUBLE HYD TEE BLOCK WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC U-BOLT 5/16-18 X 1 3/8 X2 3/16 VALVE, TWO WAY, 3/4 FORB EL 45 3/4MORB 3/4MJIC HH3/8R /4FJIC HHCS 3/8-16X3 GR5 PRESSURE GAUGE 3000 PSI AD 9/16MORB 1/4FNPT FIXED BYPASS DOWN PRESS VALVE EL 3/4MORB X 3/4FORB FILTER INLINE 3/4MORB 3/4MJIC WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HH1/2R /4FJIC 3/4MORB HHCS 5/16-18X2 1/4 GR5 HYD HOSE CLAMP BRACKET HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE ORIFICE PLATE 1/16 3/4 PRESSURE GAUGE DECAL Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Hose Grips For Breakdown 10/15/ P

46 Table of Contents Fold Hydraulics SD3000 Part Number Index (Applies to SD3000 U/D only) P /15/18

47 Table of Contents Part Number Index Section 4: Hydraulics Fold Hydraulics SD3000 (Applies to SD3000 U/D only) Ref. Part No. Part Description Comments Revision dwg C C C C C C D C C C D C C C C C C C C C C C C C C C C C S C D C Image No. CYL 4X30X2 TIE CL 3000# EL 3/4MJIC 3/4MORB HH3/8R /4FJIC HH3/8R /4FJIC AD 3/4MORB 3/4MJIC HHCS 5/16-18X3 3/4 GR5 DOUBLE HYD TEE BLOCK WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HH3/8R /4FJIC HYD HOSE CLAMP BRACKET HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X3 1/2 GR5 HH3/8R /4FJIC HHCS 5/16-18X2 1/4 GR5 HH3/8R /4FJIC U-BOLT 5/16-18 X 1 3/8 X2 3/16 VALVE, TWO WAY, 3/4 FORB EL 45 3/4MORB 3/4MJIC FILTER INLINE 3/4MORB 3/4MJIC EL 3/4MORB X 3/4FORB AD 9/16MORB 1/4FNPT PRESSURE GAUGE 3000 PSI FIXED BYPASS DOWN PRESS VALVE HH1/2R /4FJIC 3/4MORB HHCS 3/8-16X3 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE ORIFICE PLATE 1/16 3/4 PRESSURE GAUGE DECAL Refer to Hydraulic Cylinder ( C) for breakdown Refer to Hydraulic Hose Grips for breakdown 10/15/ P

48 Table of Contents Fold Hydraulics SD3300 Part Number Index (Applies to SD3300 U/D only) P /15/18

49 Table of Contents Part Number Index Section 4: Hydraulics Fold Hydraulics SD3300 (Applies to SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg C C C C C C D C C C D C C C C C C C C C C C C C C C C C S C D C C C Image No. CYL 4X30X2 TIE CL 3000# EL 3/4MJIC 3/4MORB HH3/8R /4FJIC HH3/8R /4FJIC AD 3/4MORB 3/4MJIC HHCS 5/16-18X2 3/4 GR5 DOUBLE HYD TEE BLOCK WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HH3/8R /4FJIC HYD HOSE CLAMP BRACKET HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X2 1/2 GR5 HH3/8R /4FJIC 3/4FJIC HHCS 5/16-18X2 1/4 GR5 HH3/8R /4FJIC U-BOLT 5/16-18 X 1 3/8 X2 3/16 VALVE, TWO WAY, 3/4 FORB EL 45 3/4MORB 3/4MJIC FILTER INLINE 3/4MORB 3/4MJIC EL 3/4MORB X 3/4FORB AD 9/16MORB 1/4FNPT PRESSURE GAUGE 3000 PSI FIXED BYPASS DOWN PRESS VALVE HH1/2R /4FJIC 3/4MORB HHCS 3/8-16X3 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE ORIFICE PLATE 1/16 3/4 HH3/8R /4FJIC HH3/8R /4FJIC PRESSURE GAUGE DECAL Refer to Hydraulic Cylinder ( C) for breakdown Refer to Hydraulic Hose Grips for breakdown 10/15/ P

50 Table of Contents Hydraulic Hose Grips Part Number Index (Applies to SD2600 U/D only) P /15/18

51 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Hose Grips (Applies to SD2600 U/D only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C Image No. HG HANDLE - BLACK EXT HG HANDLE - RED EXT HG HANDLE - GREEN EXT HG HANDLE - BLUE EXT HG HANDLE - BLACK RET HG HANDLE - RED RET HG HANDLE - GREEN RET HG HANDLE - BLUE RET AD 3/4MORB 3/4FORB (HG) Used on frame lift cylinders. Used on hydraulic level Used on wing fold cylinders Used on cast roller depth control. Used on frame lift cylinders. Used on hydraulic level. Used on wing fold cylinders. Used on cast roller depth control 10/15/ P

52 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X10X1.38 ROD) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

53 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4X10X1.38 ROD) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R5840 4R5109 5R5118 6R5164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD MW PISTON MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4 RPH CYL 4A5103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 10/15/ P

54 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.75X10X1.38 ROD) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

55 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 3.75X10X1.38 ROD) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R4840 4R4109 5R4118 6R4164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.75X A4103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 10/15/ P

56 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X30X2 ROD) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

57 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4X30X2 ROD) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S6676NC 3R6012 4M6108 5M6138 6R5162-ADI 7M6338 2A0024 2A C C C C C Image No. MW ROD CLEVIS 1.00PN THD MIDWAY ROD HEAD MIDWAY MW PISTON MIDWAY TUBE MIDWAY ADI BASE MIDWAY TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 CYL SEAL KIT 4 X 16 MW 5A6106 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 10/15/ P

58 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.5X10X2 ROD) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

59 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4.5X10X2 ROD) (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S7674NC 3R7640 4R7113 5R7118 6R7184-ADI 7M7318 2A C C C C C C Image No. MW ROD CLEVIS 1.00PN THD ROD HEAD PISTON MIDWAY TUBE BASE MIDWAY TIE ROD F/ 4 1/4 X 10 MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1 1/4"-12 UNF MW TIE ROD NUT NUT HEX 3/4-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4.5 RPH CYL 4A7106 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 10/15/ P

60 Table of Contents Spring Shank Assembly Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

61 Table of Contents Part Number Index Section 5: Gangs Spring Shank Assembly (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp C C H C C H C K C D H C Image No. SPRING SHANK-3X.788, LH NUT HEX TOP LOCK 1 1/4-7 PLT KNOCK OUT LH DISC HUB ASY-40MM SPRING SHANK-3X.788, RH KNOCK OUT RH PIN SPLIT Ø10X100 SD SPINDLE REPAIR KIT " SPRING SHANK HELPER X 3 PLATE - TORCHED HELPER SPRING ADJUSTMENT BKT HHCS 1/2-12X1 1/4 GR5 10/15/ P

62 Disk Scraper Table of Contents Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

63 Disk Scraper Table of Contents Part Number Index Section 5: Gangs (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwg C C C C D D Image No. NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT RHSNB 1/2-13X1 1/4 GR5 EXT: SCRAPER SD RH EXT: SCRAPER SD LH 10/15/ P

64 Table of Contents Center Gangs & Dirt Shields Part Number Index (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) P /15/18

65 Table of Contents Part Number Index Section 5: Gangs Center Gangs & Dirt Shields (Applies to SD2600 U/D, SD3000 U/D, SD3300 U/D only) Ref. Part No. Part Description Comments Revision dwgtp V V C H H C C C D C C C C D C D H C H H H H D D D H D D D C C C C C C C Image No. LH SPRING ASY RH SPRING ASY DISC 22X1.50CONC-V GANG BAR - CC FRONT GANG BAR - CC BACK U-BOLT RHSNB 5/8-11X6 GR8 PLT FTHD BUSHING - INDEX A BUSHING - INDEX B SPACER TUBE 1.25 X.28WL X.38 HHCS 3/4-10X2 1/2 GR8 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT U-BOLT 3/4-10 X 5 1/32 X 5 1/2 PLATE - TORCHED SPRING SHANK HELPER X 3 BUSHING - 1ODX.69IDX.75 HELPER SPRING ADJUSTMENT BKT HHCS 1/2-12X1 1/4 GR5 DIRT SHIELD MNT - LH 70 DIRT SHIELD MNT - RH WING 110 DIRT SHIELD MNT - RH 70 DIRT SHIELD MNT - LH WING 110 DIRT SHIELD WITH HOLES - 70 DIRT SHIELD STRAP - 70 DIRT SHIELD STRAP DIRT SHIELD MNT - 90 DIRT SHIELD WITH HOLES - 90 DIRT SHIELD WITH HOLES DIRT SHIELD STRAP - 90 U-BOLT 1/2-13X3 1/32X7 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HSBHCS 1/2-13X1 GR5 NYL Models 26, 30 & 33 Models 26, 30 & 33 See Attached photos for bushing orientation See Attached photos for bushing orientation Used on 26 & 30 Center Used on 30 & 33 Wings Used on 26 & 30 Center Used on 30 & 33 Wings Rubber Mat 26 &30 Center Used with H & H Used with H & H Used on 26 Wings & 33 Center Rubber Mat Used on 26 Wings & 33 Center Rubber Mat Used on 30 & 33 Wings Used on 26 Wings & 33 Center 10/15/ P