IBM Infoprint 5400 Model F06 A new mid-range, line impact dot matrix printer for DBCS printing

Transcription

1 Hardware Announcement April 11, 2006 IBM Infoprint 5400 Model F06 A new mid-range, line impact dot matrix printer for DBCS printing Overview IBM Infoprint 5400 Model F06 is a mid-range, double-byte character set (DBCS) line impact dot matrix printer in the Infoprint 5400 printer family. This model is released only for Japan as the higher performance model of 5400-L06, which will continue selling at the same time. Shuttle mechanism technology enables high-quality DBCS printing in the speed of 680 lines per minute (LPM) (draft mode), while acoustic noise is successfully reduced for office environment use. The doors on both the left and right hand sides make paper removal easier and will also eliminate restrictions on product placement. Infoprint 5400-F06 is equipped with 10/100BaseTX Ethernet interface and Parallel interface as standard features. In LAN environments, the embedded HTTP server can provide some Web pages for device configuration and status monitoring. Since twinax interface is not supported, the legacy requirements should be fulfilled with 5400-L06. Infoprint 5400-F06 supports Telnet5250E protocol over Ethernet interface. It also supports line printer daemon (LPD) to print IBM 5577 or ESC/P from LPD clients. This device, as well as 5400-L06, complies with ENERGY STAR requirements and the Law on Promoting Green Purchasing in Japan. Product number For details, refer to the Product number section in this announcement. Planned availability date At a glance Infoprint 5400-F06 line impact dot matrix printer features: The mid-range model of the Infoprint 5400 family and is positioned as the higher performance model of 5400-L06 Improved print speed, 680/570/410 lines per minute (LPM), at DBCS printing Industry highest impact force, which enables original plus eight copies Lower acoustic noise for use in an office environment Double-sided door improves access to the stacker and also eliminates the restrictions on product placement April 21, 2006, for Japan This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM Asia Pacific IBM is a registered trademark of International Business Machines Corporation. AG

2 AP distribution: countries. Announcement countries CTRY/Region Announced ASEAN * -- No Australia -- No Hong Kong -- No PRC -- No Macao -- No Taiwan -- No Korea -- No Japan -- Yes New Zealand -- No Not announced in all Asia Pacific * Bangladesh, Brunei, Myanmar, Sri Lanka, India, Nepal, Indonesia, Malaysia, Philippines, Singapore, Thailand, Laos, Cambodia, Vietnam Description IBM Infoprint 5400 Model F06 addresses the mid-range LIDM printer market in Japan with the following features: Print quality Infoprint 5400-F06 can provide constant print legibility in multiparts form printing (up to original plus eight copies). Print speed Infoprint 5400-F06 has several print speeds and modes (for example, Draft 680 lines per minute (LPM), DP 570 LPM, NLQ 410 LPM) for adjusting to various print-form or print-quality requirements. Multiple data stream/fonts/bar codes support Infoprint 5400-F06 supports Infoprint 5400 series compatible DBCS SCS printer data stream, 5577 (J2412) printer data stream, and EPSON ESC/P (VP-1100) emulation. Code page 1390/1399 can be used in case of DBCS SCS printer data stream. The Infoprint 5400-F06 also supports both HEISEI and IBM fonts. Those two fonts are necessary for government or public agency applications F06 also supports JIS 78/90 character for Japan. Native 10/100BaseTX Interface Support Infoprint 5400-F06 supports 10/100BaseTX interface without installing optional features. Multiple transports supported Telnet5250E over Ethernet LPR over Ethernet for IBM System p or System x Parallel interface for IBM ThinkPad series or other personal computer products Bar code support Infoprint 5400-F06 supports nine types of bar code (JAN Short, JAN Standard, CODE39, Industrial 2 of 5, Interleaved 2 of 5, NW7, MPT, CODE128, and QR code). All of them except QR code can be printable in DBCS SCS under an IBM System i environment with APSU (Advanced DBCS Printer Support for AS/400 ). QR code is only used in 5577 emulation mode. By using APSU, the customer can easily design the bar code in applications. MPT is the Japanese postal bar code and is supported in both DBCS SCS and IBM 5577 printer data stream. Font scaling Fonts can be scaled up to 20 times. Web pages Embedded HTTP server and HTML pages allows users to set up and monitor devices through the network. ENERGY STAR compliant It is designed to conform to ENERGY STAR requirements and is compliant with the Law on Promoting Green Purchasing Lowering acoustic noise and adding doors to both sides eliminate any restrictions on product placement in an office environment Product positioning Infoprint 5400-F06 is positioned as the mid-range model in the Infoprint 5400 line impact dot matrix (LIDM) printer family. It is also positioned as the higher performance model of 5400-L06. This product is suitable for the print demand around 12K pages per month. Product number Machine Description type Model DBCS Line Impact Printer 5400 F06 (All above are released for Japan) Model conversions: None Feature conversions: None Trademarks System p and System i are trademarks of International Business Machines Corporation in the United States or other countries or both. Infoprint and AS/400 are registered trademarks of International Business Machines Corporation in the United States or other countries or both. ThinkPad is a registered trademark of Lenovo in the United States, other countries, or both Other company, product, and service names may be trademarks or service marks of others. AG

3 IBM Asia Pacific Announcement Supplemental Information April 11, 2006 Publications The following publications are shipped with the product. Additional copies will be available by general availability. Title Infoprint(R) 5400-F06 Printer Setup Instruction and Operator s Guide (Japanese) Infoprint 5400-F06 Printer Maintenance Information (English) No additional publications are available. Order number GA GA The following publications are available immediately. order, contact your IBM representative. Title Infoprint 5400-F06 Printer Setup Instruction and Operator s Guide (Japanese) Displayable softcopy publications: None Source file publications: None Services Order number IBM Integrated Technology Services To GA IBM services include business consulting, outsourcing, hosting services, applications, and other technology management. These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-ibm offerings. IBM is your one-stop shop for IT support needs. For details on available services, contact your IBM representative or visit For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit For details on education offerings related to specific products, visit Select your country, and then select the product as the category. Technical information Specified operating environment Physical specifications Width: 686 mm Depth: 700 mm Height: 1,050 mm Weight: 115 kg Standards: Japan VCCI, Class A Operating environment Temperature: Operating: 5 to 40 C Max. W.B. temperature 27 C Non-operating (power off): 5 to 43 C Max. W.B. temperature 27 C Storage: 1 to 60 C Max. W.B. temperature 29 C Shipping: -20 to 60 C Max. W.B. temperature 29 C Note: No condensation is permitted in any environment. Relative humidity: Operating: 20 to 80 percent Non-operating (power off): 8 to 80 percent Storage: 5 to 80 percent Shipping: 5 to 100 percent Exhaust air value: 3,300 liter/min Noise level: Operating: 53 dba Input power: Phase: 1 phase Frequency: 50/60 Hz (+/- 3 Hz) Voltage (Japan): ac 100V (+/- 10%) Note: Universal power supply is used for the Infoprint 5400-F06. Maximum power dissipation: 1150 W Average power dissipation: 700 W Max. rating line current: 15 A Note: Customer s branch circuit capacity is required more than 15 A. Hardware requirements: None This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM Asia Pacific IBM is a registered trademark of International Business Machines Corporation. AG

4 Software requirements: section. Refer to the Compatibility Compatibility: Infoprint 5400-F06 has upward compatible functions with the IBM 5400-L06. The following table shows the comparison to existing Model 5400-L06: 5400-F L06 Shuttle Shuttle with with linear linear Technology motor motor Resolution (dpi) Print speed (LPM at 6 LPI) Draft (90(H)x180(V) dpi) DP (120(H)x180(V) dpi) NLQ (180(H)x180(V) dpi) Paper weight (kg) 1 at single part at multi part (2-3 part) at multi part (4-5 part) at multi part (6-8 part) at multi part (9 part) Dimensions (mm) Width Depth Height 1,050 1,000 Support interface Twinax Not Optional supported PC Parallel STD STD Ethernet (10/100BaseTX) STD STD Weight (kg) Max power dissipation (KVA) Acoustic Noise (db(a)) Support data stream SCS data stream support Yes Yes ESC/P data stream support Yes Yes IBM 5577 data stream support Yes Yes Support font Heisei font support Yes Yes JIS90 support Yes Yes Bar code support NW7 Yes Yes CODE39 Yes Yes Interleaved 2 of 5 Yes Yes Industrial 2 of 5 Yes Yes JAN Short, JAN Standard Yes Yes Japanese postal bar Yes Yes code support CODE128 Yes Yes QR Code Yes Yes 1 kg means the weight per 1,000 sheets of 788 mm x 1,091 mm size paper. 2 Up to nine pieces are supported on carbon paper. Up to six pieces are supported on non-carbon paper. Limitations Maximum forms length of 12 inches Minimum forms length of 8 inches Maximum forms width of 16 inches Minimum forms width of 3.5 inches Maximum print line of 13.6 inches Vertical feed emulation of 1/120 inch by 180 inches may degrade the grid-line quality in 3270/5250 emulation Planning information Customer responsibilities: Infoprint 5400-F06 is designed as customer setup (CSU) for Japan. The customer is responsible for: Adequate site, system, and other vendor preparation. Receipt at the customer s receiving dock and placement of the printer. Installation and configuration of the printer by following the instructions in the Setup Instructions and Operator s Guide. Ordering, installing, and maintaining cables. No cables except a power cord are shipped with the printer. Ordering and replacing the refill ribbon. Changing and replacing forms, including clearing jams and cleaning as appropriate. Using and following the problem determination procedures and filling out the trouble-shooting report prior to calling for IBM service. Cable orders For Ethernet attachment: Unshielded twisted-pair (UTP) in modular RJ-45 connections is required. Contact your IBM representative to place an order. For parallel attachment: Infoprint 5400-F06 is connected to the PC system with parallel cable as follows: ID# 81X7875 (2.4 m) ID# 09F5544 (5.0 m) Contact your IBM representative to place an order. Installability: The installation time for Infoprint 5400-F06 is approximately 60 minutes. Packaging: Refer to the Product structure section. Supplies: Both refill ribbon and the cartridge ribbon are the replaceable supply parts for the Infoprint 5400-F06. They are the same parts as those of 5400-L06. For end users: The following are the IBM part numbers for supplies. To enable ribbon seam skipping, following supply parts, which have a mark, indicate the ribbon seam must be used. They are the same parts as those of 5400-L06. Ribbon cassette: IBM part number 99P3010 Refill ribbon: IBM part number 99P3011 The following supply parts can also be used: Ribbon cassette: IBM part number 84G5349 Refill ribbon: IBM part number 09F4041 For Japan: The supplies of Infoprint 5400-F06 can be purchased through your IBM representative or IBM dealers in Japan. For information about IBM Printer Supplies, visit our Web site at AG

5 Security, auditability, and control This product uses the security and auditability features of host hardware, software, and/or application software. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Warranty period: One year Terms and conditions Warranty service: IBM On-site Repair (IOR) 24 hours a day, 7 days a week, same-day response Usage plan machine: No IBM hourly service rate classification: Two When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order. Field-installable features: No Model conversions: No Machine installation: Customer setup customers are responsible for installation according to the instructions IBM provides with the machine. Graduated Program License Charges apply: No. This product does not contain Licensed Internal Code or Licensed Machine Code. Educational allowance: A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance. The educational allowance is 15% for the products in this announcement. Billable exchange price: No Prices For all local charges contact your IBM representative. Trademarks Infoprint is a registered trademark of International Business Machines Corporation in the United States or other countries or both. Other company, product, and service names may be trademarks or service marks of others. -3- AG