#SEU Welcome! Solid Edge University 2016
|
|
- Elvin Blake
- 5 years ago
- Views:
Transcription
1 #SEU 2016 Welcome! Solid Edge University 2016 Realize innovation.
2 Migrating SolidWorks Files to Solid Edge Steve Weatherwax Siemens PLM Realize innovation.
3 SolidWorks Data Migration Tool Table of content What is the SW data Migration Tool 3 Requirements 3 Data Migration UI 8 Supported Features Demonstration 19 Page 3
4 What is the SolidWorks Data Migration tool The SolidWorks Data Migration tool translates SolidWorks parts, assemblies, and drawing files to Solid Edge. This tool uses the SolidWorks Automation layer to extract rich attributes\properties from the SW file These Attributes from SW are stored in the Siemens xml format PLMXML The PLMXML format references geometry stored in the Parasolid x_t file Page 4
5 Requirements to Use this Tool: Solid Edge Premium, Classic, or Foundation Solid Edge ST9 (Required to support Associative Drawing files) Licensed Copy of SolidWorks version 2012 or greater Both applications must be installed on the same machine (New Requirement) Highly suggested for ST9 Required in ST10 SolidWorks files to be migrated can exist on a share or on the local machine SW application must be able to resolve all links (Assemblies, and or Drawings) Migration tool supports both Ordered and Synchronous environments (Synchronous environment is used for best results). Page 5
6 Getting Started Click Windows application menu, All programs Solid Edge ST9 Data Migration This folder contains a short cut to the Help Topics, and Links to the 3 migration tools offered by SE. Page 6
7 SolidWorks Migration tool Page 1 of 3 SolidWorks host Name of the machine where SW is Installed (Goes away in ST10) SolidWorks working folder Folder where the SW files exist. (Must have Read and Write access) Solid Edge folders (Target location for the resulting Solid Edge files Template files Defaults to the delivered Solid Edge template files Configuration file Contains the options, and setting seen on this page Log file location This is the location of the log file for the Solid Edge transactions. Additional log file is also created in the SolidWorks working folder for the SW transactions Page 7
8 SolidWorks Migration tool Page 2 of 3 Add Adds the selected SolidWorks file(s) to the list of files to be migrated. Shift select, and control select to add files is supported. Add All - Selects all files in the current folder Remove - Removes the selected SolidWorks file(s) from the list of files to be migrated. Remove All Removes all files form the list to be migrated Page 8
9 SolidWorks Migration tool Page 3 of 3 Save the contents of the first page to the active configuration file. Or Create a new configuration file. Finish Selecting Finish will starts the migration process Page 9
10 Supported features page 1 of 3 Supported Features: Material definition maintains the material definition found in SolidWorks file. Conversion of the SolidWorks materials.sldmat to a Solid Edge materials.mtl file is required. (Use SWmat2SEMat.exe" in the SE program folder) Hole definitions - SolidWorks hole attribute are apply to Solid Edge hole features including thread size and pitch. This feature requires a conversion of the SolidWorks hole database (SWBrowser.mdb) to a Solid Edge hole table. (Use SEHolePipeTxtFromSW.exe found in the SE program folder) Page 10
11 Supported Features Page 2 of 3 Assembly relationships: SolidWorks Solid Edge Comments Coincident, Face Normal opposite Coincident, Face Normal Same direction Concentric Fixed Planar Align. Including offset Planar Mate, including offset Axial Align Grounded Face Based relationships only Family of Assemblies - All SolidWorks configurations that include suppressed parts are migrated to Solid Edge as FOA Member. Alternate or Flexible Assemblies - Alternate Position Assemblies will be migrated to Solid Edge as an FOA Member. Page 11
12 Supported Features Page 3 of 3 Associative drawing files - During the migration process a link is established between the SE Draft, and part or assembly file. All SW drawing view types are supported. Cutting plane lines, auxiliary view plane lines, and detail envelopes are supported. Dimensions migrated from SolidWorks are bound to Solid Edge drawing view geometry. Center marks and center lines are associative to the Solid Edge drawing views. Hatch and solid fills are migrated maintaining their associativity to the Solid Edge drawing view. View shading is maintained as part of this drawing view creation process. Multi-sheet drawings are supported through this migration process. Page 12
13 Lets take a look: Page 13
14 Your Mileage may vary! This is a Great Tool! Start Slow (small jobs) Acquire the proper expectations Page 14
15 Contact Steve Weatherwax Product Manager 2D - 3D Data Translation 675 Discovery Drive Huntsville Al Phone: Steve.Weatherwax@Siemens.com siemens.com Page 15
Wayne Mahan, GTAC. Converting a Solid Body to Sheet Metal
Wayne Mahan, GTAC Converting a Solid Body to Sheet Metal Realize innovation. About Myself Page 2 Wayne Mahan Application Engineer, GTAC Solid Edge wayne.mahan@siemens.com I am a GTAC Application Engineer
More informationAppendix B: Certified SolidWorks Associate Sample Exam
B Certified SolidWorks Associate (CSWA) The Certified SolidWorks Associate (CSWA) Certification Program provides the skills students need to work in the design and engineering fields. Successfully passing
More information#SEU Welcome! Solid Edge University 2016
#SEU 2016 Welcome! Solid Edge University 2016 Realize innovation. Assembly Relationships Manager Mark Thompson Global Technical Business Development Senior Application Engineer Realize innovation. Table
More informationSIEMENS. Modeling assemblies. Self-Paced Training. spse01540
SIEMENS Modeling assemblies Self-Paced Training spse01540 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management Software
More informationSolid Edge Drafting. Paul Abbott. SOLID EDGE UNIVERSITY UK 2015 Design Without Boundaries #SEU15UK
Paul Abbott Solid Edge Drafting Solid Edge University UK 2015 July 8 th, Silverstone UTC SOLID EDGE UNIVERSITY UK 2015 Design Without Boundaries Introduction Page 2 Agenda Quick Look Topics Dimension and
More informationAttach to this tutorial, there are some drawings to create the CAD models with Solid Works.
Modeling and Simulation Tutorial 1. (Slider Mechanism) Objective: To Create Slider Mechanism Elements to Use: SolidWorks Cosmos Motion Dynamics Books Description: This tutorial explains how to set up different
More informationSIEMENS. Modeling assemblies. Self-Paced Training. spse01540
SIEMENS Modeling assemblies Self-Paced Training spse01540 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management Software
More informationCT CoreTechnologie 3D_Evolution Release Note 4.0 SP0
New 3D_Evolution 4.0 version 1. 3D_Evolution 4.0 presents a totally new graphic interface: - Easy to use, - Faster access to tools and commands, - Streamlined interface design, - Larger graphical window,
More informationSIEMENS. Assembly features. spse01675
SIEMENS Assembly features spse01675 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management Software Inc. 2015 Siemens Product
More informationIndustrial-Strength Manufacturing: CAMWorks for Solid Edge
Industrial-Strength Manufacturing: CAMWorks for Solid Edge Jim Wright, #SEU15 Realize innovation. Abstract CAMWorks for Solid Edge is an in-window CAM application for Solid Edge. This session will show
More informationAssembly Modeling Constraints
Assembly Modeling Constraints College of Engineering Engineering Education Innovation Center Rev: 20130715 AJP Assembly Modeling Constraints 1 Assemblies Assemblies are collections of 3D parts that form
More information#SEU Welcome! Solid Edge University 2016
#SEU 2016 Welcome! Solid Edge University 2016 Realize innovation. Fundamental Simulation Capabilities in Solid Edge Craig Ruchti, Solid Edge Global Technical Business Development Realize innovation. Fundamental
More informationKubotek KeyCreator V8.5 What s New Page 1 of 12. Kubotek KeyCreator V8.5 What s New
Page 1 of 12 Kubotek KeyCreator V8.5 What s New Page 2 of 12 Table of Contents File Management 3 General Interface 4 Detailing/Drawing 5 Modeling 10 Display and Graphics 12 Page 3 of 12 File Management
More informationSOLIDWORKS 2019 Advanced Techniques
SOLIDWORKS 2019 Advanced Techniques Mastering Parts, Surfaces, Sheet Metal, SimulationXpress, Top Down Assemblies, Core & Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.
More information128 - FEA Model Preparation using Solid Edge's Synchronous Technology
4 th Generation VLC courtesy of Edison2 128 - FEA Model Preparation using Solid Edge's Synchronous Technology Kevin Baxter, Consultant Page 1 #SEU13 Agenda: 128 - FEA Model Preparation using Solid Edge's
More informationLesson 4: Assembly Basics
4 Lesson 4: Assembly Basics Goals of This Lesson Understand how parts and assemblies are related. Create and modify the part Tutor2 and create the Tutor assembly. Tutor1 Tutor2 Tutor assembly Before Beginning
More information#SEU Welcome! Solid Edge University 2016
#SEU 2016 Welcome! Solid Edge University 2016 Realize innovation. Solid Edge Unmanaged Greg Baldwin Realize innovation. Solid Edge Unmanaged Why Document Management in Solid Edge? Introductions - what
More informationPTC CREO. ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks. PTC Creo Essentials Packages
PTC CREO PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more products in less time,
More information#SEU Welcome! Solid Edge University 2016
#SEU 2016 Welcome! Solid Edge University 2016 Realize innovation. Assembly Occurrence Properties Mark Thompson Global Technical Business Development Senior Application Engineer Realize innovation. Table
More information604 - Drafting in Solid Edge: A Hands-on Experience
4 th Generation VLC courtesy of Edison2 604 - Drafting in Solid Edge: A Hands-on Experience Steve Webb, Solid Edge Field Support, #SEU13 Agenda: 604 - Drafting in Solid Edge: A Hands-on Experience Who
More informationIntroduction to Synchronous Modeling
#SEU15 Introduction to Synchronous Modeling Craig Ruchti Global Technical Business Development Applications Engineer Realize innovation. Introduction to Synchronous Technology Agenda Introduction Synchronous
More informationSOLIDWORKS Parametric Modeling with SDC. Covers material found on the CSWA exam. Randy H. Shih Paul J. Schilling
Parametric Modeling with SOLIDWORKS 2015 Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF
More information401 - Getting the Most Out of Solid Edge Assembly Design
4 th Generation VLC courtesy of Edison2 401 - Getting the Most Out of Solid Edge Assembly Design Art Patrick, Assembly Product Manager, #SEU13 About: Art Patrick Art Patrick Assembly Product Manager Art
More informationBlank. Chapter 1. CO2 Rail Car. A. New Metric Part. Step 1. Click File Menu > New. B. Body. Step 1. Click Right Plane
Chapter 1 A. New Metric Part. Step 1. Click File Menu > New. CO2 Rail Car Blank Step 2. Click Part Metric from the list and click OK, Fig. 1. If you are not using SolidWorks templates (you should be),
More informationAirplane Assembly. SolidWorks 10 ASSEMBLY AIRPLANE Page 9-1
Chapter 9 A. Insert Parts. Airplane Assembly Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Keep Visible in the Property Manager, Fig. 1. Step 3. Click Browse in the Property Manager,
More information#SEU Welcome! Solid Edge University 2016
#SEU 2016 Welcome! Solid Edge University 2016 Realize innovation. Solid Edge PDM - Teamcenter Greg Baldwin Realize innovation. Confidence Using Design Intent Table of contents Software Compatibility Active
More informationAssembly Modeling & Assembling Parts
This week you will learn assembly modeling & assembling parts. The steps to follow are: Assembly modeling Assembly hierarchy Assembly constraints Configurations Assembly strategy 1 Creating Assembly Components
More informationSolid Edge ST4 Update Training (Display)
Solid Edge ST4 Update Training (Display) Presented By: Steve Webb Topic Middle Mouse Button Rotate Model Edge Display Display Performance View Style Thread and Weld Bead Texture Page 2 Middle Mouse Button
More informationCREO ENGINEER PACKAGES. 3D CAD solutions optimized for your product development tasks
CREO ENGINEER PACKAGES 3D CAD solutions optimized for your product development tasks From the smallest product design firm to the largest, manufacturing organizations are under constant pressure to develop
More informationParametric Modeling with SolidWorks
Parametric Modeling with SolidWorks 2012 LEGO MINDSTORMS NXT Assembly Project Included Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationParametric Modeling with SOLIDWORKS 2017
Parametric Modeling with SOLIDWORKS 2017 NEW Contains a new chapter on 3D printing Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationChanges from SolidWorks 2003 to SolidWorks 2004
Changes from SolidWorks 2003 to SolidWorks 2004 The changes from SolidWorks 2003 to SolidWorks 2004 are primarily cosmetic. Consequently, it is quite easy to use the current edition of Learning SolidWorks
More informationAssembly Motion Study
Penny Hockey Chapter 10 Assembly Motion Study A. Rename Penny Mate. Step 1. Open your PENNY HOCKEY ASSEMBLY file. Step 2. Expand Mates in the Feature Manager and select the last Mate, Fig. 1. This should
More informationFeature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05
Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05 Today s Objectives Feature-Based Modeling (comprised of 2 sections as shown below) 1. Breaking it down into features Creating
More informationExtrusion Revolve. ENGR 1182 SolidWorks 02
Extrusion Revolve ENGR 1182 SolidWorks 02 Today s Objectives Creating 3D Shapes from 2D sketches using: Extrusion Revolve SW02 In-Class Activity Extrude a Camera Revolve a Wheel SW02 Out-of-Class Homework
More informationAutodesk AutoCAD In Mechanical Engineering Design Edward Locke
Autodesk AutoCAD In Mechanical Engineering Design Edward Locke Engineering Department Santa Ana College Mechanical Engineering Drafting Essentials Working Drawings: Orthographic Projection Views (multi-view,
More informationWhat's New in NX 11 for Design Engineering
What's New in NX 11 for Design Engineering NX 11 for Design Productivity Convergent Modeling Many industries use scanned 3D data as part of their design processes. If you have worked with this data in
More informationSOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users
SOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users The premium provider of learning products and solutions www.cadartifex.com Table of Contents Dedication... 3 Preface... 15 Part 1. Introducing
More informationSOLIDWORKS - SYLLABUS
SOLIDWORKS - SYLLABUS SolidWorks Syllabus 1 Introduction to CAD, CAE, PDM Features of SolidWorks, Total Duration : 90 Hour Various products available in SolidWorks for Product Design, Simulation, Communication
More informationReplacing parts in an assembly
Replacing parts in an assembly Publication Number spse01665 Replacing parts in an assembly Publication Number spse01665 Proprietary and restricted rights notice This software and related documentation
More informationAdjust model for 3D Printing. Direct modeling tools 13,0600,1489,1616(SP6)
Adjust model for 3D Printing Direct modeling tools 13,0600,1489,1616(SP6) Sometimes, the model needs to be prepared or adapted for printing. Adding material, change of a draft angles are an example. In
More informationFOCUS ON REAL DESIGN THE REST
FOCUS ON REAL DESIGN AUTOMATE THE REST CUSTOMTOOLS 2019 SP1 Data sheet Francois Simon Page 1 BATCH CESSING Batch printing Manage print order Insert BOM quantities Define print settings per sheet format
More informationSolid Edge ST4 Update Training Assembly
Solid Edge ST4 Update Training Assembly Created By: Mark Thompson Solid Edge Field Support Application Engineer Assembly Topics Short Cut Menu Simplification Assembly Relationship Enhancements Grounded
More informationThe Fundamentals of SolidWorks Featuring the VEXplorer robot with over 40 integrated stand-alone tutorials
INSIDE: Tutorial Model Files On CD The Fundamentals of SolidWorks 2007 Featuring the VEXplorer robot with over 40 integrated stand-alone tutorials David C. Planchard & Marie P. Planchard, CSWP SDC PUBLICATIONS
More informationSolid Edge Top Down Design
Art Patrick Solid Edge Assembly Solid Edge Top Down Design Solid Edge University 2014 May 12-14, Atlanta, GA, USA SOLID EDGE UNIVERSITY 2014 Re-imagine What s Possible #SEU14 About: Art Patrick Art Patrick
More informationLearning. Modeling, Assembly and Analysis SOLIDWORKS Randy H. Shih SDC. Better Textbooks. Lower Prices.
Learning SOLIDWORKS 2016 Modeling, Assembly and Analysis Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationWhat's New in Autodesk Inventor 2020
What's New in Autodesk Inventor 2020 This year we celebrate Inventor's 20-year anniversary with the release of Inventor 2020. This release delivers a host of enhancements to help you solve complex product
More informationAlternate assemblies
Alternate assemblies Publication Number spse01685 Alternate assemblies Publication Number spse01685 Proprietary and restricted rights notice This software and related documentation are proprietary to
More informationWheels and Axle. Chapter 7. Simples Machines. A. Save As. Step 1. If necessary, open your Track Assembly 15 file. B. Insert Truck Assembly.
Chapter 7 Simples Machines Wheels and Axle A. Save As. Step 1. If necessary, open your Track Assembly 15 file. Step 2. Click File Menu > Save As. Step 3. Key-in WHEELS AND AXLE ASSEMBLY for the filename
More informationAssembly Design: A Hands-On Experience
Mark Thompson Sr. Application Engineer Assembly Design: A Hands-On Experience Solid Edge University 2014 May 12-14, Atlanta, GA, USA SOLID EDGE UNIVERSITY 2014 Re-imagine What s Possible #SEU14 Agenda
More informationLab 6: Auxiliary Views, Cross-Sections, and Assemblies
IAT106 IAT106 Spring 2017 IAT106: Spatial Thinking and Communicating Lab 6: Auxiliary Views, Cross-Sections, and Assemblies In this lab you will complete exercises on auxiliary views, cross-sections, and
More informationSolidWorks 2014 Part II - Advanced Techniques
SolidWorks 2014 Part II - Advanced Techniques Parts, Surfaces, Sheet Metal, SimulationXpress, Top-Down Assemblies, Core and Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationCHAPTER 1: SOLIDWORKS 2008 USER INTERFACE
CHAPTER 1: SOLIDWORKS 2008 USER INTERFACE Chapter Objective SolidWorks is a design software application used to model and create 2D and 3D sketches, 3D parts and assemblies, and 2D drawings. Chapter 1
More informationTopology Optimization for Designers
TM Topology Optimization for Designers Siemens AG 2016 Realize innovation. Topology Optimization for Designers Product Features Uses a different approach than traditional Topology Optimization solutions.
More informationWelcome to Solid Edge University 2015
#SEU15 Welcome to Solid Edge University 2015 Realize innovation. Surfacing: A Hands-on Experience Solid Edge isn t just a great tool for typical machinery design; it s also very powerful when it comes
More informationGetting started with Solid Edge with Synchronous Technology
Getting started with Solid Edge with Synchronous Technology Publication Number MU29000-ENG-1000 Proprietary and Restricted Rights Notice This software and related documentation are proprietary to Siemens
More informationSolar Car. Chassis. in the Feature Manager and click Sketch from the Content toolbar, Fig. 2. Origin. on the Command Manager toolbar. Fig.
Chapter 1 A. New Part. Step 1. Click File Menu > New. Solar Car Chassis Step 2. Click Part from the list and click OK, Fig. 1. B. Sketch Chassis. Step 1. Click Right Plane in the Feature Manager and click
More informationWorking with large assemblies
SIEMENS Working with large assemblies spse01650 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management Software Inc. 2015
More informationIntroduction to SolidWorks for Technology. No1: Childs Toy
Introduction to SolidWorks for Technology No1: Childs Toy Table of Contents Table of Contents... 1 Introduction... 2 Part Modelling: Cab... 3 Part Modelling: Base... 6 Part Modelling: Wheel... 12 Assembly:
More informationDesign smarter with powerful, easy-to-use 3D CAD solutions
Creo Parametric Essentials Packages Design smarter with powerful, easy-to-use 3D CAD solutions PTC s 3D CAD product design solution, Creo Parametric, gives you the right tools to achieve the highest quality
More informationInput CAD Solid Model Assemblies - Split into separate Part Files. DXF, IGES WMF, EMF STL, VDA, Rhino Parasolid, ACIS
General NC File Output List NC Code Post Processor Selection Printer/Plotter Output Insert Existing Drawing File Input NC Code as Geometry or Tool Paths Input Raster Image Files Report Creator and Designer
More informationSolidCAM Training Course: Turning & Mill-Turn
SolidCAM Training Course: Turning & Mill-Turn imachining 2D & 3D 2.5D Milling HSS HSM Indexial Multi-Sided Simultaneous 5-Axis Turning & Mill-Turn Solid Probe SolidCAM + SolidWorks The Complete Integrated
More informationAssembly Modeling with SolidWorks For the Intermediate SolidWorks User. David C. Planchard & Marie P. Planchard SDC PUBLICATIONS
Supplemental Files on CD Assembly Modeling with SolidWorks 2006 For the Intermediate SolidWorks User David C. Planchard & Marie P. Planchard SDC PUBLICATIONS Schroff Development Corporation www.schroff.com
More informationSolid Bodies and Disjointed Bodies
Solid Bodies and Disjointed Bodies Generally speaking when modelling in Solid Works each Part file will contain single solid object. As you are modelling, each feature is merged or joined to the previous
More informationProject 3. Top Down Design In Context. Below are the desired outcomes and usage competencies based upon the completion of this Project.
Assembly Modeling with SolidWorks Project 3 Below are the desired outcomes and usage competencies based upon the completion of this Project. Project Desired Outcomes: 2AXIS-TRANSFER Assembly. PLATE-B Part.
More informationSIMPLY PRODUCTIVE NEW:
Camtek.de ENGLISH 2 PEPS Version 8.1 Wire EDM SIMPLY PRODUCTIVE PEPS is one of the leading CAD/CAM systems. With more than 30 years of practical experience and more than 40,000 installations, PEPS is unparalleled:
More informationModule 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
More informationAn Overview of Pro/ENGINEER
An Overview of Pro/ENGINEER The Foundation of Pro/ENGINEER What is Pro/ENGINEER? Pro/ENGINEER is a computer graphics system for modeling various mechanical designs and for performing related design and
More information3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
More information#SEU Welcome! Solid Edge University 2016
#SEU 2016 Welcome! Solid Edge University 2016 Realize innovation. Reverse Engineering Convert STL mesh data to a Solid Edge part model and speed up Product Development. Realize innovation. About me Sandeep
More information#SEU16. Design Collaboration using Dropbox Solid Edge built-in data management
Design Collaboration using Dropbox Solid Edge built-in data management Realize innovation. Agenda Solid Edge data & the cloud Extended collaboration framework in Solid Edge ST9 Cloud-enabled vaulting File
More informationAnalysis of a 4 Bar Crank-Rocker Mechanism Using COSMOSMotion
Analysis of a 4 Bar Crank-Rocker Mechanism Using COSMOSMotion ME345: Modeling and Simulation Professor Frank Fisher Stevens Institute of Technology Last updated: June 29th, 2009 Table of Contents 1. Introduction
More informationVersion 2011 R1 - Router
GENERAL NC File Output List NC Code Post Processor Selection Printer/Plotter Output Insert Existing Drawing File Input NC Code as Geometry or Tool Paths Input Raster Image Files Convert Raster to Vector
More informationNX electrical and mechanical routing
electrical and mechanical routing Accelerating design of electrical and mechanical routed systems in complex assemblies Electrical routing benefits Re-uses logical design eliminates redundant data creation
More informationSOLIDWORKS Costing is available in SOLIDWORKS Professional and SOLIDWORKS Premium.
The SOLIDWORKS Costing tool helps you calculate how much it costs to manufacture sheet metal, machined, and multibody parts, as well as plastic molded, cast, 3D printed parts, and multibody weldments by
More informationAdvanced Wire Harness Methods
#SEU15 Advanced Wire Harness Methods Realize innovation. Advanced Wire Harness Methods Terminal Assignments Harness Subassemblies Importing from ECAD Systems/General Information Path Creation/Editing Wires/Cables/Bundles
More informationThis document summarizes some of what s new that have been deployed with Solid Edge Version ST3. For more information visit the website of Solid DNA
What s new Solid Edge ST3 Introduction guide to what s new This document summarizes some of what s new that have been deployed with Solid Edge Version ST3. For more information visit the website of www.soliddna.com
More informationFig. 2 Mastercam 2020 Spinning Top SW 19 to MCam20 TOOLPATHS Page 13-1
Mastercam 2020 Chapter 13 Spinning Top SOLIDWORKS 19 to Mastercam 2020 A. Open File in Mastercam 2020. Step 1. If necessary, save your Handle and Flywheel parts file in SOLIDWORKS. Step 2. In Mastercam
More informationTutorial: Using SolidWorks to assemble an off-the-shelf lens system
Tutorial: Using SolidWorks to assemble an off-the-shelf lens system Jennifer Harwell College of Optical Sciences, University of Arizona November 29, 2010 Introduction When designing an optical system,
More informationProprietary and restricted rights notice
Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management Software Inc. 2012 Siemens Product Lifecycle Management Software
More informationCAM Express for machinery
Siemens PLM Software CAM Express for machinery Optimized NC programming for machinery and heavy equipment Benefits Effectively program any type of machinery part Program faster Reduce air cutting Automate
More information#SEU16. Welcome to Solid Edge University 2016
Welcome to Solid Edge University 2016 Built-In Data Management A disciplined approach to managing Solid Edge files Anshuman Prakash Portfolio Development (Mainstream Engineering, India & Sri Lanka) Realize
More informationSolidWorks 2013 Part II - Advanced Techniques
SolidWorks 2013 Part II - Advanced Techniques Parts, Surfaces, Sheet Metal, SimulationXpress, Top-Down Assemblies, Core and Cavity Molds Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff
More informationWhat's New in CAMWorks For Solid Edge-2015
Contents (Click a link below or use the bookmarks on the left) What s New in CAMWorks For Solid Edge 2015-SP0 2 Supported Platforms 2 Resolved CPR s document 2 General... 3 CAMWorks Virtual Machine for
More informationSiemens PLM Software Wayne Mahan, Solid Edge GTAC. GTAC Customer Support It s More than just a Call
Wayne Mahan, Solid Edge GTAC GTAC Customer Support It s More than just a Call Realize innovation. About myself Wayne Mahan Application Engineer, GTAC Solid Edge wayne.mahan@siemens.com I am a GTAC Application
More informationWhat s new in Solid Edge ST6?
4th Generation VLC courtesy of Edison2 Siemens PLM Software What s new in Solid Edge ST6? Design better. Benefits Open up new market opportunities with more realistic product designs Lower part costs without
More informationF-1 Car. Blank. in the Feature Manager and click Sketch from the Content toolbar, Fig. 3. Origin. on the Features toolbar.
Chapter 1 A. New Metric Part. Step 1. Click File Menu > New. F-1 Car Blank Step 2. Click Part Metric from the list of templates and click OK, Fig. 1. If you are not using SOLIDWORKS templates (you should
More informationTutorial: Package, analyze, and validate an OpticStudio sequential file in LensMechanix. By Esteban Carbajal, Senior Optomechanical Engineer
Tutorial: Package, analyze, and validate an OpticStudio sequential file in LensMechanix By Esteban Carbajal, Senior Optomechanical Engineer November 2017 www.zemax.com/lmx/ LMxSales@zemaxZemax.com LMxSupport@zemaxZemax.com
More informationTRAINING SESSION Q3 2016
There are 6 main topics in this training session which is focusing on 3D Import and 2D Drawing Tips and Tricks in IRONCAD. Content 3D modeling kernels... 2 3D Import... 3 Direct Face Modeling... 5 Unfold
More informationEquipment Support Structures
Equipment Support Structures Overview Conventions What's New? Getting Started Setting Up Your Session Creating a Simple Structural Frame Creating Non-uniform Columns Creating Plates with Openings Bracing
More informationIntroducing SolidWorks Assemblies
Introducing SolidWorks Assemblies SAAST Robotics 2008 Assemblies Collection of related parts saved in one SW document file - *.sldasm Contains anywhere from 2 to over 1000 components or sub-assemblies
More informationShape Design & Styling. Real Time Rendering 1 (RT1) CATIA V5R20
Shape Design & Styling Real Time Rendering 1 (RT1) CATIA V5R20 Shape Design & Styling Real Time Rendering Enable designers to leverage technological material specifications to produce realistic renderings
More informationIntroduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
More informationFig. 1. Fig. 1. on the Standard Views toolbar. SolidWorks ASSEMBLY AIRPLANE Page 8-1
Chapter 8 Airplane Assembly A. Insert Set of Parts. Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click View Menu > Origins to display the origin. Step 3. Click Keep Visible in the Property
More informationTHE POWERFUL AFFORDABLE SOLUTION FOR 2D & 3D CAD AND 3 AXIS CAM MILLING APPLICATIONS PRO 2D & 3D CAD-CAM SOFTWARE
THE POWERFUL AFFORDABLE SOLUTION FOR 2D & 3D CAD AND 3 AXIS CAM MILLING APPLICATIONS v26mill3 AXIS PRO 2D & 3D CAD-CAM SOFTWARE This software is quite frankly WAY underpriced in terms of it s advanced
More informationSolidWorks Implementation Guides. User Interface
SolidWorks Implementation Guides User Interface Since most 2D CAD and SolidWorks are applications in the Microsoft Windows environment, tool buttons, toolbars, and the general appearance of the windows
More informationSolidWorks 2015 Tool/Options Explained
SolidWorks 2015 Tool/Options Explained Tools/ Options/ System Options New options for 2015 listed in green color GENERAL Open last used document(s) at startup: Never or Always If you close SW with the
More informationAssembly Modeling Constraints. ENGR 1182 SolidWorks 05
Assembly Modeling Constraints ENGR 1182 SolidWorks 05 Today s Objectives Creating assemblies by constraining 3D parts together Movement and Location dictated by Constraints SW05 Activity SW05 Application
More informationPropeller. Chapter 13. Airplane. A. Base for Blade. Step 1. Click File Menu > New, click Part and OK.
Chapter 13 Airplane Propeller A. Base for Blade. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch toolbar, Fig. 1. from the Content Step
More informationAutodesk Inventor 6 Essentials Instructor Guide Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the follow
Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the following topics and provides exercises for students to practice their skills. Day Two Topic: How to create
More information