SEBUTHARGA NO.: SH/02/2015 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

Size: px

Start display at page:

Download "SEBUTHARGA NO.: SH/02/2015 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS"

Bernard Booker
5 years ago
Views:

1 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ITE ALAYSIA s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ALAYSIA s RQT COPLY S REARKS (INCLUDIN DETAILS/REASONS AND ATTACHENT) IF DOES NOT COPLY S REARKS IF ANY ATTACHENT) COPLIANCE STATEENT A ENERAL REQUIREENTS SCOPE OF WORKS The sebutharga covered by these specifications is for supply, install, testing and commissioning (including appropriate packaging) of hardware & software to CyberSecurity alaysia. Bidder shall confirm that their proposal is based on entire provision of the above scope of works. Bidder s partial compliance to the said scope of works shall be disqualified. 2.0 S RESPONSIBILITY 2.1 The bidder shall review this document and take full responsibility of obtaining information from CyberSecurity alaysia as may be required to meet the specifications and requirements. I 2.2 The bidder shall review and fulfill all specifications and requirements before committing to sign the purchase agreement. 2.3 The bidder shall be the authorized representative of the hardware system and software distributor in alaysia. The bidder UST provide letter of confirmation or appointment from the original hardware and software manufacturer for our reference. 3.0 DOCUENTATION REQUIREENTS 3.1 All documentation shall be in English. Bidder shall be responsible for any translation cost incurred (if any) in regard to the submission of the documentation required by this tender. 3.2 CyberSecurity alaysia reserves the right to reproduce all or part of the document submitted by the bidder for internal use. Note 1 : CyberSecurity alaysia s Requirement Level :- andatory Requirement : These are ESSENTIAL/CRITICAL requirements that UST be fully complied by Bidder. Bidder to provide document(s) to support the above said requirement. Page 1 of 5

2 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ITE ALAYSIA s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ALAYSIA s RQT COPLY S REARKS (INCLUDIN DETAILS/REASONS AND ATTACHENT) IF DOES NOT COPLY S REARKS IF ANY ATTACHENT) COPLIANCE STATEENT 4.0 WARRANTY REQUIREENTS 4.1 The warranty UST be one (1) year standard software/hardware warranty and services from the date of software/hardware commissioning and acceptance by CyberSecurity alaysia 4.2 The warranty shall include both parts and labour. 5.0 DELIVERY REQUIREENTS 5.1 Successful bidder shall complete the entire scope of works within two (2) to four (4) weeks after receipt of Letter of Acceptance (LOA) from CyberSecurity alaysia. 5.2 CyberSecurity alaysia has the authority to reject any kind of bugs during or after installation (within the warranty period) and the replacement or any labour shall be done within the same day without any charges. 5.3 The bidder shall be responsible for any incidence occurred during transportation of the unit to CyberSecurity alaysia. B TECHNICAL SPECIFICATIONS & REQUIREENT SPECIFICATION Purchase specification for the Provision Of 2D And 3D Sensors For Digital Forensics Department, Cybersecurity alaysia. 2.0 PURPOSE To Supply, Install, Testing and Commissioning of 2D And 3D Sensors For Digital Forensics Department, CyberSecurity alaysia. Note 1 : CyberSecurity alaysia s Requirement Level :- andatory Requirement : These are ESSENTIAL/CRITICAL requirements that UST be fully complied by Bidder. Bidder to provide document(s) to support the above said requirement. Page 2 of 5

3 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ITE ALAYSIA s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ALAYSIA s RQT COPLY S REARKS (INCLUDIN DETAILS/REASONS AND ATTACHENT) IF DOES NOT COPLY S REARKS IF ANY ATTACHENT) COPLIANCE STATEENT 3.0 TECHNICAL SPECIFICATION Bidder s proposed 2D And 3D Sensors must be able to follow based-on the minimum specification and features as below: 3.1 2D & 3D Sensors units of Kinect for Windows V2 sensors with following specifications or equivalent:- i) 64-bit (x64) processor ii) Physical dual-core 3.1 Hz (2 logical cores per physical) or faster processor iii) USB 3.0 controller dedicated to the Kinect for Windows v2 sensor* iv) 4 B of RA v) raphics card that supports DirectX 11* vi) Windows 8 or 8.1, or Windows Embedded 8 vii) viii) Kinect for Windows v2 Sensor package includes: a) Kinect for Windows v2 sensor and hub b) Power supply and power cord c) USB 3 cable 3. 4 units of Structure Sensor obile 3D Scanner isense with following specifications or equivalent:- i) ax resolution 0.9mm ii) Accuracy mm iii) OS supported ios 7 or later units of Sense 3D Scanner Sense with following specifications or equivalent:- i) ax resolution 0.9mm ii) Accuracy mm iii) OS supported: Win 7, 8, OS X 10.8 or later Note 1 : CyberSecurity alaysia s Requirement Level :- andatory Requirement : These are ESSENTIAL/CRITICAL requirements that UST be fully complied by Bidder. Bidder to provide document(s) to support the above said requirement. Page 3 of 5

4 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ITE ALAYSIA s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ALAYSIA s RQT COPLY S REARKS (INCLUDIN DETAILS/REASONS AND ATTACHENT) IF DOES NOT COPLY S REARKS IF ANY ATTACHENT) COPLIANCE STATEENT units of 3D Printer with following specifications or equivalent:- i) CubePro Duo: a) Ultra-high resolution with 70 micron settings b) Printing Resolution (242.9x230x70.4 mm) c) Triple color materials ii) CubePro Power Leads iii) CubePro lu Stick Pad (2 unit) iv) CubePro USB Stick 2B (4 unit) v) CubePro Stick Pad (4 unit) vi) Filaments Cartridges: a) PLA Plastics: i) Tan (5 unit) ii) Neon Orange (5 unit) iii) low in the Dark Neon reen (3 unit) iv) Industrial rey (3 unit) b) ABS Plastics i) Dark rey (3 unit) ii) Red (5 unit) iii) low in the Dark Neon Blue ( 3 unit) iv) Brown (5unit) vii) Training, Installation and Supports units of obile 3D Interface with following specifications or equivalent:- i) Set of ipad Air & iphone 6 Plus a) Ipad Air Spec i) Wi-Fi + Cellular ii) Retina Display 9.7-inch iii) A7 chip 64-bit architecture and 7 motion coprocessor iv) 64B Storage Size b) iphone 6 Plus Spec i) Wi-Fi + 4 LTE ii) 5.5 inch Retina HD Display iii) 2048-by-1536 resolution at 264 pixels per inch (ppi) iv) Fingerprint-resistant oleo phobic coating v) A8 chip 64-bit architecture and 8 motion coprocessor vi) 64B Storage Size Note 1 : CyberSecurity alaysia s Requirement Level :- andatory Requirement : These are ESSENTIAL/CRITICAL requirements that UST be fully complied by Bidder. Bidder to provide document(s) to support the above said requirement. Page 4 of 5

5 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ITE ALAYSIA s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ALAYSIA s RQT COPLY S REARKS (INCLUDIN DETAILS/REASONS AND ATTACHENT) IF DOES NOT COPLY S REARKS IF ANY ATTACHENT) COPLIANCE STATEENT C SUPPORT AND AINTENANCE REQUIREENT VENDOR ASSISTANCE REQUIREENT Bidder is required to have an established technical support set-up in alaysia. Bidder UST possess technical support personnel. Bidder to specify the number of personnel. 1.3 Bidder UST provide technical support 24x7 during weekdays, weekend and public holiday, based on below given service level agreement (SLA): Response : within 1 hour upon receiving complaint/ issue Remedy : workaround within 3 business day Resolution : issue resolved within 10 working days 1.4 Bidder is required to specify on any special requirement in order to provide on site support. 1.5 Bidder UST provide after sales support for a minimum period of three (3) years. 1.6 Bidder is required to specify any special requirement in order to provide onsite support 1.7 Bidder UST provide support maintenance for Year 2 for Items nos.3. until Bidder UST be able to perform standard configuration on 2D and 3D Sensors, perform backup or migration when there is changes to the device, and be able to perform installation and un-installation of corporate software as and when requested by customer. D PAST EXPERIENCES Bidder shall have at least 3 years experience in similar business. Bidder to provide list of client reference (latest-completed or ongoing) and consists of authorized contact person and number. Note 1 : CyberSecurity alaysia s Requirement Level :- andatory Requirement : These are ESSENTIAL/CRITICAL requirements that UST be fully complied by Bidder. Bidder to provide document(s) to support the above said requirement. Page 5 of 5

SEBUTHARGA NO.: SH/24/2018 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

SEBUTHARGA NO.: SH/24/2018 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ITE ALAYSIA s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREENTS ALAYSIA s RQT COPLY S REARKS (INCLUDIN DETAILS/REASONS AND ATTACHENT) IF DOES