CROSS REFERENCE INDEX

Size: px

Start display at page:

Download "CROSS REFERENCE INDEX"

Beverly Jefferson
5 years ago
Views:

1 arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS DOES NOT ONSTITUTE PRT PERFORMNE OR EPTNE OF ONTRT ROSS REFERENE INDEX KIT PRT NO. INSTLLTION DRWING NO. MODEL DESRIPTION DESRIPTION INSTLLTION DRWING NO. KIT NO VETOR NDK SINGLE-TEMP W/STBY DOMESTI FUEL TNKS (22" DIMETER) LED LIGHT BR INSTLLTION INSTRUTIONS NOTES: 1.0 OMPLETE INSTLLTION INLUDES ND IS NOT LIMITED TO: 1.1 UNIT INSTLLTION 1.2 BTTERY INSTLLTION 1.3 DEFROST LINE ROUTING ND LMPING 1.4 FUEL LINE ONNETIONS TO UNIT 1.5 OMPLETION OF PRE-DELIVERY INSPETION(PDI) PER MODEL UNIT PREP ND INITIL DJUSTMENTS HEKLIST UNIT RUN IN PER PDI HEKLIST WRRNTY REGISTRTION RD SUBMITTL 2.0 THE TRILER OR BOXR STRUTURE MUST BE EVLUTED BY THE TRILER OR BOXR MNUFTURER TO DETERMINE IT'S BILITY TO WITHSTND THE LODS IMPOSED BY THE UNIT OVER IT'S SERVIE LIFE. RRIER TRNSIOLD DOES NOT ONVEY NY ENDORSEMENT OR WRRNTY FOR THE TRILER'S OR BOXR'S STRUTURL INTEGRITY. WEIGHTS: VETOR NDK REEFER UNIT (WET, LESS BTTERY): 2132 LBS [967 kg] BTTERY: 80 LBS [36 kg] MXIMUM 3.0 UNIT MOUNTING SURFES OF THE TRILER OR BOXR THT ONTT THE UNIT MOUNTING PDS MUST BE UNI-PLNR TO WITHIN 0.13 [3] TO PENT DISTORTION OF THE UNIT ND/OR TRILER. 4.0 TRILER OR BOXR SURFES THT ONTT THE UNIT MOUNTING GSKET SHOULD NOT PROTRUDE MORE THN 0.19 [5] BOVE THE PLNE DEFINED BY THE MOUNTING PD SURFES TO ENSURE PROPER IR SEL. 5.0 LL DIMENSIONS SHOWN RE IN INHES, WITH THE METRI ONVERSIONS IN [MILLIMETERS]. ONTENTS GENERL INFORMTION 1 SWING RDIUS 2 UNIT DIMENSIONL DT 2 EVP. BK PNEL: TRILER OR RIL 3 TRILER OR BOXR PREPRTION 4 UNIT INSTLLTION 5 UNIT LIFTING LOTION 5 BTTERY INSTLLTION 6 & 7 HUTE DIMENSIONL INFORMTION 8 STND BY POWER PLUG INSTLLTION 9 BOTTOM PNEL INSTLLTION PRE-DELIVERY INSPETION ND WRRNTY REGISTRTION DOUMENTS RE SHIPPED WITH UNIT ND RE LOTED IN THE SIDE DOOR POKET WITH UNIT MNUL ND SHEMTI. UPDTED INDEX. DDED NOTE 6.0, 10 ND INSTLLTION KIT P/N TO HRT. SEE PR 2017 ZMG 72N0217P17 B NOTE 2.0: REMOVED LISTING FOR UNIT WEIGHT OF 2177 LBS. 12OT2015 KFV 72N0033P15 INITIL RELESE 17 NOV 2014 LT-NM 72N0077P14 SYM ISION REORD DTE BY ENGR. M.E. NP NO. THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] INDEX INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK SEE SEPRTE PRTS LIST DRWING NO OF 10 DRWING LSSIFITION: US ER99 SUPERSEDES: PRT LSSIFITION: US ER99

2 arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS DOES NOT ONSTITUTE PRT PERFORMNE EPTNE OF ONTRT OR [ ] MX. OPEN POSITION [948.9 ] HINGE PIN, SIDE DOORS 8.47 (OVERLL MX) [215.1 ] [ ] [914.4 ] UNIT MOUNTING PDS [444.6 ] HINGE PIN FRONT DOORS 1.25 HINGE PIN, SIDE DOORS [31.7 ] R66.25 [ ] R49.00 [ ] R20.14 [511.4 ] R60.74 [ ] [562.0 ] [ ] MX. OPEN POSITION R24.92 [633.0 ] R26.16 [664.5 ] [628.5 ] HINGE PIN FRONT DOORS [787.5] [ ] [579.5 ] (74.79 ) UPPER DOOR TPER [ ] 8.19 [207.9] FROM FRME STND OFF PD TO OUTSIDE EDGE OF BK PNEL SWING RDIUS LL UNIT VERSIONS [ ] [ ] [ ] OVERLL HEIGHT 4.00 [101.6] (RETURN IR DEPTH OPENING) [946.2 ] PLLET MOUNTING NGLE, REMOVE BEFORE INSTLLING UNIT. (74.60 ) LOWER DOOR TPER [ ] SYM INITIL RELESE. ISION REORD 10 NOV 2014 LT-NM DTE BY [813.2 ] 72N0077P14 ENGR. M.E. NP NO. THIRD NGLE PROJETION [400.0 ] 7.90 [200.7 ] FROM FRME STND OFF PD IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] ER99 UNIT DIMENSION INFORMTION LL UNIT VERSIONS INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK SUPERSEDES: DRWING NO. PRT LSSIFITION: US ER99 2 OF DRWING LSSIFITION: US [946.1 ]

3 arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED SUBMISSION OF THESE DRWINGS OR DOU MENTS OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. DOES NOT ONSTITUTE PRT PERFORMNE EPTNE OF ONTRT OR [ ] EVP WIDTH [457.2 ] (2) PLS [770.3 ] SUPPLY IR OPENING 1.86 [47.2 ] 2.85 [72.4 ] TOP OF MIN FRME 4.80 [122.0 ] SUPPLY IR OPENING [868.0 ] BK PNEL [ ] RETURN IR OPENING [ ] 7.86 [199.6 ] RETURN IR OPENING [ ] RETURN IR OPENING NOTE: USE URBSIDE MOUNTING LOTION. USING ITEM 92 PLUG UNUSED HOLE FTER INSTLLTION (SEE NOTE 6 ON SHT 5) MOUNTING PDS (QTY 9) RODSIDE PLLET MOUNTING NGLE - REF REMOVE BEFORE INSTLLING UNIT [ ] RETURN IR WIDTH OPENING PLLET MOUNTING NGLE - REF REMOVE BEFORE INSTLLING UNIT RER VIEW : WITH RIL BK PNEL SYM INITIL RELESE. ISION REORD 17 NOV 2014 LT-NM DTE BY 72N0077P14 ENGR. M.E. NP NO. THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK SUPERSEDES: DRWING NO. PRT LSSIFITION: US ER99 3 OF DRWING LSSIFITION: US ER99 RER VIEW : WITH STNDRD BK PNELS

4 arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS DOES NOT ONSTITUTE PRT PERFORMNE OR EPTNE OF ONTRT TRILER OR BOXR BODY PREPRTION 35.00[889] 70.00[1778] UTION: UNIT MOUNTING SURFES OF TRILER OR BOXR THT ONTT THE UNIT MOUNTI NG PDS MUST BE UNI-PLNR TO WITHIN 0. 13[3] TO PENT DISTORTION OF UNIT ND/OR TRILER/BOXR. UTION: TRILER OR BOXR SURFES THT ONT T THE UNIT MOUNTING GSKET SHOULD NOT PROTRUDE MORE THN 0.19[5] BOVE THE PLNE DEFINED BY THE MOUNTING PD SURFES TO ENSURE PROP ER IR SEL [848] [1697] OPENING LLOW 2.75" SPE ROUND TRILER OPE NING FOR GSKET SELING. (SEE UTION NOT ES) 1.61 [41] 4.00[102] 6.44(164) 8.00 MX [203] 6.00 MIN [152.4] 2.80 MX./0.80 MIN. [71] [20] 4.61 [117] MOUNTING STUD, 1/2-13 UN GRDE [1011] [1168] OPENING INSULTION INSIDE LINER 4.60 [117] 7.00 [178] [576] NOTE : USE URBSIDE MOUNTING LOTION. PLUG UNUSED HOLE FTER INSTLLTION. VERTIL & HORIZONTL FRMING (THERMLLY NON-ONDUTIVE) 4.03 [102] 3.00 MX MIN. [76] [64] 8(PLS) [417] LIGHT BR OPTIONL (SEE DWG ) TRILER SIDE VIEW TYPIL GLDHND LOTION (TRILER) TRILER OR BOXR FRONT VIEW INITIL RELESE. 17 NOV 2014 LT-NM 72N0077P14 SYM ISION REORD DTE BY ENGR. M.E. NP NO. THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK DRWING NO. 4 OF DRWING LSSIFITION: US ER99 SUPERSEDES: PRT LSSIFITION: US ER99

5 arrier Transicold Division arrier orporation NOTE: BULKHED,IR HUTE ND TRNSITION DUT SHOWN RE OPTIONL FETURES.FOR BEST IR IRULTION ND PRODUT PROTETION RRIER TRNSIOLD HIGHLY REOMMENDS THE USE OF BULKHEDS IR HUTES ND TRNSITION DUTS. ONTT YOUR DELER OR RRIER TRNSIOLD FOR REOMMENDTIONS. UNIT LIFTING LOTION PREPRE THE BODY TO REEIVE THE UNIT. DIMENSIONS FOR EVPORTOR OPENING ND MOUNTING STUD LOTIONS N BE FOUND ON 4 OF THIS DRWING. 2.0 REMOVE WIRE TIES HOLDING DEFROST DRIN HOSES, ND FUEL LINES. PLE LINES WHERE THEY WILL NOT BE UGHT BETWEEN THE UNIT FRME ND THE MOUNTING. SURFE. REMOVE PLLET MOUNTING NGLE ON BK BOTTOM OF FRME. 3.0 OPEN SIDE DOORS TO LLOW ESS TO MOUNTING STUD LOTIONS ON UNIT. 4.0 PREPRE THE UNIT FOR LIFTING: STNDING ON LDDER OR WORK-STND, HOOK LIFTING PPRTUS (LIFTING SPREDER BR WITH SUFFIIENT PITY TO SUPPORT UNIT ND BTTERY) THROUGH THE LIFTING EYES. LIFT POINT SHOULD BE ENTERED OVER THE UNIT. 5.0 RISE THE UNIT ND INSTLL IN THE BODY OPENING. ENSURE THT LL EIGHT STUDS RE FULLY ENGGED IN THE UNIT FRME. PLE WSHER (ITEM 70) ND LOK-NUT (ITEM 45) ON EH OF THE 8 STUDS. (NOTE: THE LOWER ENTER STUD MUST BE ESSED FROM THE FRONT OF THE UNIT.) SNUG THE NUTS, THEN EVENLY TIGHTEN LL EIGHT TO 60 FT-LB/81.6 NM USING TORQUE WRENH. REMOVE LIFTING PPRTUS. 6.0 INSTLL BUTTON PLUGS (ITEM 92) IN UNIT FRME WHERE MOUNTING STUDS RE LOTED ND DDITIONL UNUSED HOLE (SEE SHT 3). 7.0 ROUTE DEFROST DRIN HOSES DOWN THE FRONT OF THE TRILER OR BOXR ND LMP TO FRONT WLL USING 2 LMPS (ITEM 15) ND 2 THRED FORMING SREWS (ITEM 30) FOR EH DRIN HOSE. UT HOSE TO PROPER LENGTH (PPROXIMTELY 3.00[76.2] BOVE 5th-WHEEL PLTE ON TRILER) ND INSTLL KZOOS (ITEM 90) ON THE HOSES. 8.0 INSTRUTIONS FOR FUEL LINE ONNETION RE SUPPLIED WITH THE FUEL TNK KIT. INSTRUTIONS FOR LIGHT BR INSTLLTION RE INLUDED WITH THE LIGHT BR KIT. FTER INSTLLTION 9.0 EVPORTOR IR INSTLL BTTERY ORDING TO INSTRUTIONS ON S 6 & 7. IF UNIT HS BEEN SUPPLIED WITH BTTERY, ONNET BTTERY BLES ORDING TO THE INSTRUTIONS ON S 6 & PERFORM PRE-DELIVERY INSPETION. OPIES OF OMPLETED HEKLIST SHOULD BE SUPPLIED TO SELLING DELER ND USTOMER OPERTE UNIT IN ONTINUOUS RUN WITH RER DOORS OPEN (MNUL) MODE. REFER TO THE PRE-DELIVERY INSPETION FORM SUPPLIED WITH UNIT FOR THE REOMMENDED LENGTH OF TIME. PERFORM FINL INSPETION ON UNIT. RUN- IN SET UP SHOULD BE "PER PDI " SEE NOTE 8.0 RETURN IR SREEN REOMMENDED DRIN LINES SUPPLIED WITH REEFER UNI T, UT TO SUIT. (DO NOT KINK OR OTHERWISE LOSE DOWN TUBE I.D.) SEE NOTE 7.0 SEE NOTE UNIT INSTLLTION ISED NOTES 10.0, 11.0 ND PR 2017 ZMG 72N0217P17 INITIL RELESE. 17 NOV 2014 LT-NM 72N0077P14 DTE BY SYM ISION REORD OR ENGR. M.E. NP NO. THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] IMPORTNT: PRIOR TO FINL DELIVERY TO USTOMER, WRRNTY REGISTRTION MUST BE OMPLETED. ONE OPY SHOULD BE PROVIDED TO THE USTOMER. ONE OPY TO THE SELLER, ND THE FINL OPY MUST BE SENT TO RRIER TRNSIOLD. IN-SERVIE DTE MUST BE STMPED ON THE UNIT IN THE PROPER LOTION (SERIL NUMBER PLTE) TO TIVTE WRRNTY OVERGE. OPTIONL BULKHED ONFIGURTION: HOLE PTTERN OR OPEN RE FOR RETURN IR FLOW MUST TOTL T LEST 2.75 SQ.FT. OF IR PSSGE. HOLE PTTERN OR OPEN RE MUST BE REESSED SO THT RGO LODED GINST BULKHED WILL NOT OBSTRUT IR PSSGE OPENINGS. PERFORTED BULKHEDS, THT MEET THESE REQUIREMENTS, MY BE INSTLLED TIGHT WITH FLOOR. INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK SUPERSEDES: DRWING NO. PRT LSSIFITION: US ER99 ER99 SEE NOTES 5.0 ND [152] MIN LERNE FOR SOLID BULKHED (TOP OF FLOOR TO BOTTOM OF BULKHED) SEE NOTE 13 FOR OPTIONL BULKHED ONFIGURTION ONDENSER IR 4.00[102] BULKHED INSIDE OPENING 90 DOES NOT ONSTITUTE PRT PERFORMNE EPTNE OF ONTRT UNIT INSTLLTION: ONDENSER IR (FRONT FE ONLY) FOR BTTERY INSTLLTION SEE SHTS 6 & 7 OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS PREPRE UNIT FOR INSTLLTION: PPLY RRIER OVL FTER UINT IS FSTENED TO TRILER ND MOUNTING HOLE IS PLUGGED. TWO PLES PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED 5 OF DRWING LSSIFITION: US 96 THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS

6 arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS DOES NOT ONSTITUTE PRT PERFORMNE OR EPTNE OF ONTRT BTTERY INSTLLTION INSTRUTIONS SEE NEXT FOR PITORILS OR REFER TO BTTERY INSTLLTION DOUMENT IN POLY BG FSTENED TO FRME RIL. UNITS SUPPLIED WITH BTTERY INSTLLED 1.0 UT WIRE TIE(S) THT HOLD BTTERY BLES TO EH OTHER. 2.0 ONNET RED BTTERY BLE TO THE POSITIVE (+) BTTERY TERMINL; ONNET BLK BLE TO NEGTIVE (-) BTTERY TERMINL (USE OF ORROSION INHIBITOR IS REOMMENDED). 3.0 POSITION TERMINL OVERS SUPPLIED WITH BLES OVER TERMINLS. UNITS SUPPLIED WITHOUT BTTERY INSTLLED 1.0 USE THE FOLLOWING INFORMTION TO ORRETLY SELET THE BTTERY PERFORMNE NEEDED FOR REFRIGERTION UNITS. GROUP SIZE: GROUP 31 VENT LOTION: SIDE VENT VOLTS: 12 VOLTS D MPERGE: MINIMUM 700 OLD RNKING 0$F MINIMUM 545 OLD RNKING -20$F NOTE: WHEN SELETING SPEIFI BRND OF BTTERY, LWYS ENSURE THT THE BTTERY HOSEN IS RTED T 0$F (0 DEGREES FHRENHEIT) ND NOT 0$ (0 DEGREES ELSIUS). FILURE TO USE THE PROPER BTTERY SIZE WILL RESULT IN REDUED BTTERY LIFE ND NO-STRT ONDITION. THE REOMMENDED MXIMIM BTTERY WEIGHT IS 80 LBS. 2.0 UT WIRE TIE HOLDING THESE PRTS TO THE FRME ND REMOVE PRTS. PLE BTTERY IN TRY WITH POSITIVE (+) TERMINL TO THE RER OF THE UNIT (S SHOWN). ONNET BTTERY BLES (THE USE OF ORROSION INHIBITOR ON THE TERMINLS IS REOMMENDED); RED BLE TO POSITIVE (+) TERMINL, BLK BLE TO THE NEGTIVE (-) TERMINL. BLES SHOULD BE ROUTED TOWRD THE OMPRESSOR (S SHOWN). TIGHTEN TERMINL ONNETORS SEURELY. 3.0 INSTLL L-BRKET ND J HOOKS ND HOLD-DOWN HNNEL USING NUTS, PLIN ND LOK WSHERS S SHOWN. SEURELY TIGHTEN THE SREWS TO PENT MOVEMENT OF THE BTTERY. 4.0 POSITION TERMINL OVERS SUPPLIED WITH BLES OVER TERMINLS. INITIL RELESE. 17 NOV 2014 LT-NM 72N0077P14 SYM ISION REORD DTE BY ENGR. M.E. NP NO. THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK DRWING NO. 6 OF DRWING LSSIFITION: US ER99 SUPERSEDES: PRT LSSIFITION: US ER99

7 arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS DOES NOT ONSTITUTE PRT PERFORMNE OR EPTNE OF ONTRT NOTE: 1.0 UTION: DUE TO DIFFERENT BTTERY MFG. WHEN PPLYING TORQUE TO BTTERY U-BRKET, MKE SURE THERE IS NO BTTERY HOUSING DISTORTION OR RUSHING. U-BRKET 2.0 WHEN INSTLLING POSITIVE BTTERY BLE TO BTTERY POST ENSURE THERE IS LERNE BETWEEN THE BLE ND THE FRME. 3.0 WHEN INSTLLING LEFT J-HOOK INTO L-BRKET ROTTE OPPOSITE OF RIGHT J-HOOK. NEGTIVE TERMINL (BLK) TORQUE TO 19.0#1.0 FT-LBS POSITIVE TERMINL (RED) TORQUE TO 19.0#1.0 FT-LBS 5/16-18 NUT (1 EH SIDE) TORQUE TO 5.0 MX FT-LBS SEE NOTE 1.0 5/16 LOK WSHER (1 EH SIDE) RIGHT 5/16-18 J HOOK LEFT 5/16-18 J HOOK SEE NOTE 3.0 5/16 FLT WSHER (LRGE O.D.) (1 EH SIDE) BTTERY RIGHT 5/16-18 J HOOK (1 EH SIDE) BTTERY L-BRKET (1 EH SIDE) 5/16-18 X 1.00 LG SR (2 EH SIDE) TORQUE TO 19.0#1.0 FT-LBS 5/16 LOK WSHER (2 EH SIDE) RER VIEW (+) 15$ BTTERY L-BRKET 5/16 FLT WSHER (SMLL O.D.) (2 EH SIDE) URB SIDE VIEW INSTLL BTTERY INTO UNIT WITH POSITIVE (+) TERMINL TOWRD THE RER. INITIL RELESE. 17 NOV 2014 LT-NM 72N0077P14 SYM ISION REORD DTE BY ENGR. M.E. NP NO. BTTERY INSTLLTION PROEDURE FOR UNITS SHIPPED WITHOUT BTTERY. LOTE BG STRPPED TO VERTIL RER TUBE NEXT TO BTTERY TRY ND REMOVE U-BRKET, L-BRKETS & MOUNTING HRDWRE. THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK (-) SETION - BTTERY BLE RRNGEMENT. DRWING NO. 7 OF BTTERY L-BRKET DRWING LSSIFITION: US ER99 SUPERSEDES: PRT LSSIFITION: US ER99

8 arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS DOES NOT ONSTITUTE PRT PERFORMNE OR EPTNE OF ONTRT NOTE: BULKHED,IR HUTE ND TRNSITION DUT SHOWN RE OPTIONL FETURES.FOR BEST IR IRULTION ND PRODUT PROTETION RRIER TRNSIOLD HIGHLY REOMMENDS THE USE OF BULKHEDS IR HUTES ND TRNSITION DUTS. ONTT YOUR DELER OR RRIER TRNSIOLD FOR REOMMENDTIONS MINIMUM [ 50.8] W 2.00 MINIMUM [ 50.8] 45$ MINIMUM TRNSITION NGLE HUTE (NOT SUPPLIED) H TRNSITION DUT (NOT SUPPLIED) HUTE TRNSITION SLE EVPORTOR OUTLET NOZZLE 2.00 MINIMUM [ 50.7] FROM BOTTOM EDGE OF EVPORTOR NOZZLE TO TRNSITION FOR HUTE. HRD RETNGULR HUTE MIN. DIMENSIONS W H W1 H1 SLE EVPORTOR OUTLET NOZZLE HUTE SOFT HUTE MINIMUM DIMENSIONS HUTE REMOVED FOR LRIFITION OF TRNSITION INITIL RELESE. 17 NOV 2014 LT-NM 72N0077P14 SYM ISION REORD DTE BY ENGR. M.E. NP NO. TRNSITION & HUTE DETILS THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] W1 H INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK DRWING NO. 8 OF DRWING LSSIFITION: US ER99 SUPERSEDES: PRT LSSIFITION: US ER99

9 arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS DOES NOT ONSTITUTE PRT PERFORMNE EPTNE OF ONTRT OR USTOMER BLE ND PLUG SSEMBLY [69.9] BLE OVERING POWER ORD 0.60 WIRE INSULTION [15.2] STRIP LENGTH SLE SSEBLE WIRE FERRULE SUPPLIED WITH PLUG. SIZE ORDING TO INSTRUTIONS. WRNING: BE SURE POWER IS DIS-ONNETED TO USTOMER BLE RED ENTIRE SUPPLIER DIRETIONS SUPPLIED WITH PLUG BEFORE STRTING INSTLLTION. SYM INITIL RELESE. ISION REORD 17 NOV 2014 LT-NM DTE BY 72N0077P14 ENGR. M.E. NP NO. THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK SUPERSEDES: DRWING NO. PRT LSSIFITION: US ER99 9 OF DRWING LSSIFITION: US ER99 PRTIL LOWER RODSIDE VIEW STNDBY PLUG MOUNTING

10 arrier Transicold Division arrier orporation TORQUE TO 98 IN-LBS PROPRIETRY TO RRIER ORPORTION ND SHLL NOT BE USED OR DISLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF RRIER OR PORTION. SUBMISSION OF THESE DRWINGS OR DOU MENTS DOES NOT ONSTITUTE PRT PERFORMNE EPTNE OF ONTRT OR 85 TORQUE TO 98 IN-LBS 3 75 THIS DOUMENT ND THE INFORMTION O NTINED THEREIN IS TORQUE TO 98 IN-LBS BOTTOM PNEL (REF) BOTTOM PNEL INSTLLTION 75 OPENING FOR LIFT GTE BTTERY BLE 85 TORQUE TO 6-8 FT-LBS 2.0 SLIDE (5) OPENING S IN THE BOTTOM PNEL OVER THE (5) RER MOUNTING NGLES ON THE FRME ND SEURE PNEL TO THE OTHER (6) MOUNTING NGLES USING SUPPLIED SREWS (ITEM #75) ND WSHERS (ITEM #78). BOTTOM SYM NEW ISION REORD 05 PR 2017 ZMG DTE BY 72N0217P17 ENGR. M.E. NP NO. THIRD NGLE PROJETION IMPERIL INH FORMT: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WITH METRI ONVERSIONS IN [MILLIMETERS] INSTLLTION INSTRUTIONS TRILER SINGLE-TEMP NDK SUPERSEDES: DRWING NO. PRT LSSIFITION: US ER99 10 OF DRWING LSSIFITION: US ER99 OPENING FOR ONDENSTE DRIN OPENING FOR FUEL LINE ROUTING OPENING FOR ONDENSTE DRIN LINE ND OPTIONL HRNESS ONNETIONS NOTES: 1.0 INSTLL (3) MOUNTING NGLES (ITEM #80) ND (1) MOUNTING NGLE (ITEM #85) WITH RIVNUTED FLNGE POINTING DOWN. SEURE TO FRME USING SUPPLIED SREWS (ITEM #75), KEEPING THE BOTTOM OF THE NGLES FLUSH ND PRLLEL TO THE BOTTOM OF THE FRME.

CROSS REFERENCE INDEX

CROSS REFERENCE INDEX arrier Transicold Division arrier orporation THIS DOUMENT ND THE INFMTION O NTINED THEREIN IS PROPRIETRY TO RRIER PTION ND SHLL NOT BE USED DISLOSED TO OTHERS, IN WHOLE IN PRT, WITHOUT THE WRITTEN UTHIZTION