1492 ACABLE 010 A. Standard m (16.40 ft) ( ft) 0.1 m (0.328 ft increments) m ( ft) 0.5 m (1.

Transcription

1 Bulletin Ctlog Numer Explntion Anlog Cles Pre-Wired Bulletin pre-wired les re designed to minimize ontrol wiring in pnel. Pre-wired les, when used with n nlog IFM, reple the point-to-point wiring etween Allen-Brdley progrmmle ontroller I/O modules nd individul terminl loks. The pre-wired les hve removle terminl lok or wiring rm from the PLC on one end of the le nd D-Shell onnetor with slide-loking mehnism on the other to onnet to the IFM. Most pre-wired les use twisted pirs nd ll hve shield to id noise immunity of the low-level nlog signls. Most les hve prepred drin wire with ring lug t the I/O module end of the le for onvenient grounding of the le shield to the hssis. They re % tested for ontinuity to mke perfet onnetion every time. The nlog pre-wired les re offered in four stndrd lengths of.,.,., nd. m to fit vriety of pplitions. Other length les re lso ville s uild-to-order produts. Pre-wired nlog les re ville for mny of the Bulletin SLC I/O, Bulletin ControlLogix I/O, Bulletin Compt I/O for ComptLogix, MiroLogix, Flex I/O, nd Bulletin PLC- I/O Anlog Cles I/O Redy - Not Aville Anlog Cles IFM Redy - Not Aville Ct. No. Explntion Anlog Cles for Bulletins, /, nd Importnt: Use tles s produt onfigurtor for pre-wired, IFM-redy, nd I/O module-redy les for Bulletins,, nd digitl I/O module les. All omintions of these fields mke vlid produt t. nos. Refer to seletion tles for IFM/XIM omptiility, dditionl les, nd ordering. - Anlog Interfe Cles Ct. No. Explntion Anlog Cles for Bulletin,, H/S nd Anlog Interfe Cles Importnt: For explntion purposes only. It is not produt onfigurtor. All omintions of fields re not vlid produt t. nos. First, selet the desired AIFM using the steps in Ordering Digitl nd Anlog Wiring Systems in pulition -TD_- EN-P. Then, use this rekdown for verifition nd explntion only. ACABLE A Stndrd or Build-to-Order Length Cle. m (. ft). m (. ft). m (. ft) Stndrd. m (. ft).. m - (.. ft). m (. ft ) -.. m (.. ft). m (. ft) Build-to-Order -.. m (.. ft). m (. ft) ACAB A Stndrd or Build-to-Order Length Cle. m (. ft). m (. ft). m (. ft) Stndrd. m (. ft).. m - (.. ft). m (. ft ) -.. m (.. ft). m (. ft) Build-to-Order -.. m (.. ft). m (. ft) Preferred vilility t. nos. re old. Pulition A-CAA-EN-P A, B, C, D, K, L, P, Q, R E, F, G, H, J TA, TB, TC, TD, UA, UB, UC, UD, VA, VB, WA, WB, X, Y, Z, ZA, ZB, ZC YT M A AA, AB, BA, BB, BC, BD, C,CA, CB, CC, D, EA, EB, EC, ED ZH XS, ZS Z A-Cle Type nlog nd RTD I/O nlog nd RTD I/O nlog, RTD, nd thermoouple I/O Pre-wired le for Bulletin thermoouple I/O pulse input I/O modules Cle Type Anlog le for SLC Anlog le for I/O Anlog le PowerFlex H Anlog le PowerFlex S Anlog le for Flex I/O

2 Bulletin Overview Digitl IFM Modules with Field-Removle s (RTBs) Selet groups of stndrd, fused nd rely digitl wiring system modules (refer to Seletion Tles) hve field terminl loks tht n e removed (RTB). This RTB feture n provide esier wiring of field devies in ontrol inet where the IFM is loted in hrd to reh re, or where hnd-ess is limited. It n lso provide esier nd fster replement of dmged or defetive wiring system module. The removle plug portion of the RTB ssemly hs srew t eh end to seurely fsten it to the RTB soket, whih is mehnilly seured to the module iruit ord hnd housing. Modules re shipped with the RTB soket, ut without the removle plug(s). Plugs re ville with srew style (e.g., -RTBN)or push-in style (e.g., - RTBP) terminls nd must e ordered seprtely(two piees per t. no.). Refer to the seletion tles for the prtiulr PLC I/O system of interest to determine whih modules re offered with field removle terminl loks. All of the fetures ville on fixed terminl lok produts (e.g. lels, geny ertifition, et.) re lso provided for the removle terminl lok wiring system Anlog AIFM Modules with Field-Removle s (RTBs) Selet groups of nlog wiring system modules (refer to Seletion Tles) hve field terminl loks tht n e removed (RTB). This RTB feture n provide esier wiring of field devies in ontrol inet where the IFM is loted in hrd to reh re, or where hnd-ess is limited. It n lso provide esier nd fster replement of dmged or defetive wiring system module. The removle plug portion of the RTB ssemly hs srew t eh end to seurely fsten it to the RTB soket, whih is mehnilly seured to the module iruit ord nd housing. Modules hre shipped with the RTB soket, ut without the removle plug(s). Plugs re ville with srew style (- RTBxxN) or push-in style (-RTBxxP) terminls nd must e ordered seprtely (Two piees per t. no.). Refer to the Seletion Tles for the prtiulr PLC I/O system of interest to determine whih modules re offered with field Removle Terminls Bloks. All of the fetures ville on nlog fixed terminl lok produts (e.g. lels, geny ertifition, et.) re lso provided for the removle terminl lok wiring system Ctlog Numer Explntion Importnt: The following t. no. rekdown is for explntory purposes only. It is not produt onfigurtor. Not ll omintions of fields re vlid t. nos. Use this rekdown for verifition nd explntion only. Removle Plug Seleting Wiring System Use of Seletion Tles RTB N Numer of Poles/Terminl N P Connetor Style Srew Style Push-in Style Lote I/O module required. The top row indites the I/O module for the I/O pltform. Lote the interfe module required. The seond nd third olumn indites the interfe module tlog numer. Determine if n interfe module exists for the I/O module; indited y Letter in row (interfe tlog numer) nd the olumn (I/O module). Lote le. This is the letter indited y Letter in the row (interfe tlog numer) nd the olumn (I/O module). The Letter represents the suffix of the pre-wired le. Determine le tlog numer. Add -CABLE _ Letter, exmple -CABLE _A. Determine length of le required, stndrd lengths re.,.,., nd. m; whih represents,, nd for _ in the le tlog numer. Exmple -CABLEA =. m le with Letter A. Preferred vilility t. nos. re old. Pulition A-CAA-EN-P -

3 Bulletin Bulletin ControlLogix Modules Anlog AIFMs nd Cles for Bulletin ControlLogix Stndrd nd Comintion Modules Voltge [V] Term. per I/O -h input, output or -in/-out Fixed Removle -IF (Sgl-End Voltge) -IF (Sgl-End Current) -IF (Diff Voltge) -IF (Diff Current) Bulletin Anlog I/O Module Ct. No. Ct. No. Ct. No. Anlog Cle Ct. No. Suffix Feed-through -AIFM- -RAIFM- -RTB VA VB... -h isolted -AIFMS- -RAIFMS- -RTB ZA ZB ZC -h differentil, -h single-ended -h lown -h lown -h input lown fuse LED Blown fuse LED See footnotes on the following pge. -AIFM- -RAIFM- -RTB TA TB TC TD UA UB UC UD WA WB Fusile Anlog -AIFM-F- TA TB TC TD UC UD ZA ZB ZC -AIFM-F- UA UB UC UD -AIFM-F- UA UB UC UD Sfety Integrity Level -TAIFM-F- UA -IF (Sgl-End Voltge) -IF (Sgl-End Current) -IF (Diff Voltge) -IF (Diff Current) -OF (Voltge) -OF (Current) -OF (Voltge) -OF (Current) -IFFXOFF (Cur In & Out) -IFFXOFF (Volt In & Out) -IFFXOFF (Current In & Voltge Out) - Preferred vilility t. nos. re old. Pulition A-CAA-EN-P

4 Bulletin Bulletin ControlLogix Modules Anlog AIFMs nd Cles for Bulletin ControlLogix Isolted, RTD, Thermoouple nd Speilty Modules Voltge [V] Term. per I/O Fixed Removle -IFI (Current) Bulletin Anlog I/O Module Ct. No. Ct. No. Ct. No. Anlog Cle Ct. No. Suffix Feed-through.. -h isolted -AIFMS- -RAIFMS- -RTB X Y Z Y Y Z -h differentil, -h single-ended -AIFM- -RAIFM- -RTB UC UD WA WB Thermoouple -h -AIFMTC- Y YT -h, ounter input outputs -h, fused ounter input, fused outputs -h w/ lown -h w/ lown input/ output h -IFI (Voltge) High-Speed Counter/Enoder -IFCIS -AIFMCE XA XB Fusile High-Speed Counter/Enoder -AIFMCE-F XA XB Fusile Anlog -AIFM-F- UC UD -AIFM-F- UB -AIFMPI M To order Pre-wired Cle, dd the Suffix No. from the tle ove to the end of the Ct. No. elow..m Cle = -ACABLE_.M Cle = -ACABLE_.M Cle = -ACABLE_.M Cle = -ACABLE_ Custom Length Cle = -CABLEXXX_. See Ctlog Numer Explntion on pge - for ville Custom Length s to reple XXX in Ct. No. Order plugs seprtely (two plugs per tlog numer). Plugs re ville in srew style nd push in style terminl types. To order, reple the in the tlog numer with the ode for the desired terminl style. The ode for srew style is N nd the ode for push in style is P. Some nlog I/O modules n e operted in up to four modes (urrent/voltge, single-ended/differentil) sed on onnetions. In ll ses, eh hnnel is ftory-onfigured for the sme mode. However, you n field onfigure ny hnnel for nother mode. You my need to lter the terminl lok wiring to mth the pplition. Refer to the PLC I/O Module Instlltion Mnul. Requires two Ct. No. -AIFM-F-, one le, Ct. No. -ACUF, is required. This module is for use in SIL sfety systems only. It does not stisfy the requirements for generl I/O fult tolerne. To use this module in SIL pplition, speilly developed pplition softwre for the ControlLogix proessor must e used. To otin the ltest revision of this pplition softwre ontt Tehnil Support t OFCI -OFVI -IRI -ITI -ITI -IFH (Voltge with HART) -IFH (Current with HART) -IFH (Single-ended with HART) -IFH (Differentil with HART) -OFH (Voltge with HART) -OFH (Current with HART) -HSC (...V DC) -HSC (V DC) -PIM Preferred vilility t. nos. re old. Pulition A-CAA-EN-P -

5 Bulletin Speifitions Generl Wiring System Speifitions Ageny Certifitions: Modules nd Cles Ageny Certifition Modules CE Certifitions Ctlog Numer -... ULus Listed: Hzrdous Lotions: Clss I Div (ll exept modules with relys); Groups A, B, D, nd D. Temperture : C. Stndrd UL File No. E, Guide No. NRAG/NRAG ULus Stndrd Lotions; Module with relys; UL File No. E, Guide No. NRAQ/NRAQ Ftory Mutul (FM): Hzrdous Lotions; Clss I Div (ll exept modules with relys): Groups A, B, C, nd D. Temperture Rting: C. FM File J.I. Complint for ll pplile diretives Mximum Pek Trnsient Voltge V Mximum Current (per iruit) A (exept relys) Mximum Current (per module) A (exept relys) Wire Rnge (Rted Cross Setion) Wire Strip Length Reommended Srew Tightening Torque Fixed Srew Style: # # AWG (... mm) Removle Srew Style: # to # AWG... mm) Removle Push-in Style: # to # AWG (...mm) Fixed Srew Style:. in. (. mm) Removle Srew Style:. in. (. mm) Removle Push-in Style:. in. (. mm) Fixed Srew Style:.. l-in. (.. Nm) Removle Srew Style:.. l-in. (.. Nm) Removle Push-in Style: NA (See Push-in RTB Plug Speifitions) Operting Temperture Rnge...+ C Storge Temperture Cles C Storge Temperture Modules C Operting Humidity Pollution Degree % non-ondensing Mx. AWG # # # # # # Mx. No. of Wires per Terminl Ct. Nos. -IFMF-FAD- nd -IFMF-FD- re rted t A. Mximum numer of the sme guge strnded opper ondutors llowed per wire funnel. Pollution Degree is n environment where normlly only non-ondutive pollution ours, exept for osionl temporry ondutivity used y ondenstion shll e expeted. For trnsients >V, use UL Reognized suppression devie rted t. kv withstnd. For rely ontt rtings, refer to pge Preferred vilility t. nos. re old. Pulition A-CAA-EN-P