Oracle Data Relationship Management

Transcription

1 Orace Data Reationship Management Orace Data Reationship Steward Orace Data Reationship Management for Orace Hyperion Enterprise Panning Suite Orace Data Reationship Management for Orace Hyperion Financia Cose Suite Orace Data Reationship Management Read Ony Access Orace Data Reationship Governance Instaation Guide Reease Updated: November 2015

2 Data Reationship Management Instaation Guide, Copyright 1999, 2015, Orace and/or its affiiates. A rights reserved. Authors: EPM Information Deveopment Team This software and reated documentation are provided under a icense agreement containing restrictions on use and discosure and are protected by inteectua property aws. Except as expressy permitted in your icense agreement or aowed by aw, you may not use, copy, reproduce, transate, broadcast, modify, icense, transmit, distribute, exhibit, perform, pubish, or dispay any part, in any form, or by any means. Reverse engineering, disassemby, or decompiation of this software, uness required by aw for interoperabiity, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, pease report them to us in writing. If this is software or reated documentation that is deivered to the U.S. Government or anyone icensing it on behaf of the U.S. Government, then the foowing notice is appicabe: U.S. GOVERNMENT END USERS: Orace programs, incuding any operating system, integrated software, any programs instaed on the hardware, and/or documentation, deivered to U.S. Government end users are "commercia computer software" pursuant to the appicabe Federa Acquisition Reguation and agency-specific suppementa reguations. As such, use, dupication, discosure, modification, and adaptation of the programs, incuding any operating system, integrated software, any programs instaed on the hardware, and/or documentation, sha be subject to icense terms and icense restrictions appicabe to the programs. No other rights are granted to the U.S. Government. This software or hardware is deveoped for genera use in a variety of information management appications. It is not deveoped or intended for use in any inherenty dangerous appications, incuding appications that may create a risk of persona injury. If you use this software or hardware in dangerous appications, then you sha be responsibe to take a appropriate fai-safe, backup, redundancy, and other measures to ensure its safe use. Orace Corporation and its affiiates discaim any iabiity for any damages caused by use of this software or hardware in dangerous appications. Orace and Java are registered trademarks of Orace and/or its affiiates. Other names may be trademarks of their respective owners. Inte and Inte Xeon are trademarks or registered trademarks of Inte Corporation. A SPARC trademarks are used under icense and are trademarks or registered trademarks of SPARC Internationa, Inc. AMD, Opteron, the AMD ogo, and the AMD Opteron ogo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Orace Corporation and its affiiates are not responsibe for and expressy discaim a warranties of any kind with respect to third-party content, products, and services uness otherwise set forth in an appicabe agreement between you and Orace. Orace Corporation and its affiiates wi not be responsibe for any oss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an appicabe agreement between you and Orace.

3 Contents Documentation Accessibiity... 7 Documentation Feedback... 9 Chapter 1. Instaing Data Reationship Management Instaation Prerequisites Architecture Options Orace Database Prerequisites SQL Server Database Prerequisites PDF Font Requirement for Asian Gyphs Virtua Memory Pagefie Sizing Additiona Documentation About Middeware Home and EPM Orace Home Foundation Services Data Reationship Management CSS Bridge Depoyment Scenarios for Data Reationship Management and Foundation Services Instaing Data Reationship Management Instaing Data Reationship Management in a Distributed Environment Instaing Secondary Data Reationship Management Web Server Hosts Instaing Secondary Foundation Services Hosts Troubeshooting Chapter 2. Configuring Data Reationship Management Configuring Foundation Services for Data Reationship Management Configuring Secondary Foundation Services Hosts Configuring Shared Services with an Externa Provider Configuring Shared Services for Singe Sign On (SSO) Configuring CSS Mode for Data Reationship Management Starting the Data Reationship Management Configuration Consoe Configuring Data Reationship Management Appications Creating an Appication Setting the Appication Defaut Cuture iii

4 Date, Time, and Number Formatting Creating a Repository Copying a Repository Configuring Host Computers Configuring Authentication Settings Configuring EPM Registry Settings Configuring Schedued Tasks Removing an Appication Saving Configuration Settings and Starting the Service on the Appication Server Launching Data Reationship Management in a Web Browser Disabing Compatibiity View Mode in Internet Exporer Configuring the Migration Utiity Increasing Upoad Fie Size Load Baancing Data Reationship Management Web Appications Terminating SSL at the Web Server Using Singe Sign On with Data Reationship Management Web Access Management Chapter 3. Depoying and Configuring the Data Reationship Management Web Services API System Requirements Depoyment Prerequisites Instaing and Configuring Foundation Services Instaing Metadata Services Schema for Orace Web Services Manager Configuring Orace Web Services Manager Configuring WebLogic with an Externa Provider Configuring the API Adapter Depoying the Web Services Appications Securing the Data Reationship Management Web Services Configuring Poicies in Orace Web Services Manager Configuring Data Reationship Management API Adapter for SSL (Optiona) Testing the Data Reationship Management Web Services Using Orace Enterprise Manager Configuring Logging for the Web Service Appications Troubeshooting Chapter 4. Configuring Data Reationship Management for EPM Mobie Depoyment Requirements Configuring Proxy Requests Configuring the REST Web Service for SSL (Optiona) Testing the REST Web Service iv

5 Chapter 5. Upgrading a Data Reationship Management Instaation Architecture Comparison Supported Upgrade Paths Repository Upgrade Paths for x Repository Upgrade Paths for x Upgrading Checkist Upgrading an Existing Data Reationship Management Appication Data Anaysis Working with Externa Connections Data Conversion Appying Updates to an Appication Manua Upgrade Tasks Upgrading Properties with Derived Property References Upgrading Batch Cient Scripts Upgrading API Programs Chapter 6. Monitoring Data Reationship Management Appications v

6 vi

7 Documentation Accessibiity For information about Orace's commitment to accessibiity, visit the Orace Accessibiity Program website at Access to Orace Support Orace customers that have purchased support have access to eectronic support through My Orace Support. For information, visit or visit if you are hearing impaired. 7

8 8

9 Documentation Feedback Send feedback on this documentation to: Foow EPM Information Deveopment on these socia media sites: LinkedIn - Twitter - Facebook - Googe+ - YouTube - 9

10 10

11 1 Instaing Data Reationship Management In This Chapter Instaation Prerequisites...11 Additiona Documentation...18 About Middeware Home and EPM Orace Home...18 Foundation Services...19 Instaing Data Reationship Management...21 Instaing Data Reationship Management in a Distributed Environment...22 Troubeshooting...22 Instaation Prerequisites Items to check: Orace Data Reationship Management must be instaed by a user who is ogged in as an administrator. Instaers shoud seect to Run As Administrator when aunching an instaation executabe. Intended host computers meet or exceed the minimum system requirements. For information on certified versions of patform components, refer to the Orace Hyperion Enterprise Performance Management System Certification Matrix at fusioncertification htm. Microsoft.NET Framework 4.0 and 4.5 are required and are a prerequisite ony for a machine that does not have an internet connection. If the.net Framework is not instaed and you do have an internet connection, then the Data Reationship Management instaer wi insta them for you. Database server is instaed and running on the database computer. Internet Information Services (IIS) is instaed and operationa on the Web server. User accounts that can perform these actions are avaiabe on the appication server: m m m m Edit registry settings Read and write to the oca fie system Launch processes Run as a service 11

12 For more information, see: Architecture Options Orace Database Prerequisites SQL Server Database Prerequisites PDF Font Requirement for Asian Gyphs Virtua Memory Pagefie Sizing Architecture Options The foowing diagrams depict different scenarios for configuring Data Reationship Management. Figure 1 Data Reationship Management Architecture 12

13 EPM Foundation must be instaed on a Windows server accessibe by Data Reationship Management. It can be run ocay or on FMW App Server. Figure 2 Data Reationship Management Standard Architecture 13

14 Figure 3 Data Reationship Management with EPM Foundation 14

15 Figure 4 Data Reationship Management with API Integrations 15

16 Figure 5 Data Reationship Management with EPM Mobie Orace Database Prerequisites If you are using an Orace RAC database system, you must create the tabespaces with the appropriate RDBMS software prior to instaation. Whether the scripts are run automaticay or manuay, a user with DBA rights must be ogged in. When you manuay execute the database scripts, the User ID that was designated for Data Reationship Management database connectivity in the Repository Wizard is created in the RDBMS (if it does not aready exist). The user is assigned a defaut tabespace of DRM_DATA and must have access rights to the foowing items: m Defaut tabespace (usuay DRM_DATA) 16

17 m m m m m UNLIMITED TABLESPACE CONNECT CREATE ANY SEQUENCE CREATE USER ALTER USER When you manuay execute the database scripts, the user is ogged in as the schema owner which, has a defaut tabespace of DRM_DATA. This user must have access rights to the foowing items: m m m m m m m Defaut tabespace (usuay DRM_DATA) this can be done after the insta if the tabespaces were not created. UNLIMITED TABLESPACE DBA CONNECT CREATE ANY SEQUENCE CREATE USER ALTER USER You can change the schema owner name during the instaation process. SQL Server Database Prerequisites If you are using a SQL Server Custer database system, you must create the database with the appropriate RDBMS software prior to instaation. If the User ID designated for Data Reationship Management database connectivity is created manuay prior to the instaation, it is important to make this user database owner of the Data Reationship Management database. PDF Font Requirement for Asian Gyphs To be abe to see Asian gyphs in downoaded PDF fies, the "Aria Unicode MS" font must be instaed on the Web server. Virtua Memory Pagefie Sizing To ensure proper performance, it is strongy recommended that Windows pagefie size on the Data Reationship Management server be at east 1.5 times system memory with growth aowed up to 2.0 times system memory. When system memory is arge (for exampe, 64 GB and higher) the pagefie can be between 1.0 and 1.5 times system memory. Smaer pagefie sizes can resut in serious performance and functiona issues. 17

18 Additiona Documentation You can find Orace Hyperion Enterprise Performance Management System instaation documentation in the Orace Documentation Library on the Orace Technoogy Network. The foowing documentation may be usefu for instaing and configuring Data Reationship Management: Orace Enterprise Performance Management System Instaation Start Here Orace Enterprise Performance Management System Instaation and Configuration Guide Orace Enterprise Performance Management System Instaation and Configuration Troubeshooting Guide Orace Enterprise Performance Management System Backup and Recovery Guide Orace Enterprise Performance Management System Security Configuration Guide About Middeware Home and EPM Orace Home Middeware Home A Middeware home consists of the Orace WebLogic Server home, and, optionay, one or more Orace homes, incuding EPM Orace home. A Middeware home can reside on a oca fie system or on a remote shared disk that is accessibe through Network Fie System (NFS). The Middeware home ocation is defined during the first product instaation on the computer. Subsequent instaations on the computer use the previousy defined ocation. The defaut instaation directory is Orace/Middeware. The Middeware home ocation is referred to as MIDDLEWARE_HOME throughout this document. EPM Orace Home An Orace home contains instaed fies necessary to host a specific product, and resides within the directory structure of the Middeware home. The EPM Orace home contains fies for EPM System products. Components of EPM System products are instaed in the EPM Orace home directory under the Middeware home. The defaut EPM Orace home ocation is MIDDLEWARE_HOME/ EPMSystem11R1. In addition, common interna components used by the products are instaed in EPM Orace home. Choose the ocation carefuy to ensure that the ocation has enough disk space for a products that you are instaing on the machine. You cannot change the ocation. The EPM Orace home ocation is defined in the system environment variabe caed EPM_ORACLE_HOME. The EPM Orace home ocation is referred to as EPM_ORACLE_HOME throughout this document. 18

19 Foundation Services Data Reationship Management requires Orace Hyperion Foundation Services to be instaed when the foowing optiona features are used: User authentication with externa user directories such as LDAP. Load baancing Data Reationship Management Web appications Using singe-sign on with Data Reationship Management Integrations with Orace Genera Ledger for E-Business Suite and Fusion Accounting Hub Integration with Orace Hyperion EPM Architect API programs and SOA-based processes using the Data Reationship Management web service Orace Data Reationship Governance Mobie cient uses the Data Reationship Governance REST Web service and externa authentication The Foundation Services instaation incudes the foowing components which can be configured to enabe these features for Data Reationship Management: Orace WebLogic Server Orace HTTP Server Orace Web Services Manager Orace Hyperion Shared Services Foundation Services is instaed using the EPM System instaer. The instaation and configuration process for Foundation Services is documented in the Orace Enterprise Performance Management System Instaation and Configuration Guide. For more information, see Data Reationship Management CSS Bridge and Depoyment Scenarios for Data Reationship Management and Foundation Services. Data Reationship Management CSS Bridge The Data Reationship Management CSS Bridge is used to communicate with Shared Services and must be instaed when Foundation Services is used with Data Reationship Management. The foowing information and requirements are important for understanding the Data Reationship Management CSS Bridge. The CSS Bridge Host system can be the Data Reationship Management appication server or a different supported Microsoft Windows system. The CSS Bridge component is not supported on Unix/Linux systems. If the designated CSS Bridge Host is not the Data Reationship Management appication server, then the CSS Bridge component must be instaed on the CSS Bridge Host. In this scenario, the CSS Bridge can be instaed as a standaone component. 19

20 A Foundation Services instaation and depoyment is required on the Windows system where the CSS Bridge wi be instaed and running. For CSS Bridge depoyment options, see Depoyment Scenarios for Data Reationship Management and Foundation Services. Depoyment Scenarios for Data Reationship Management and Foundation Services Review Figure 3 on page 14 for more information on Data Reationship Management with Foundation Services. See Configuring Secondary Foundation Services Hosts. A systems are Microsoft Windows uness otherwise noted. Tabe 1 Depoyment Scenarios for Data Reationship Management and Foundation Services Scenario System 1 System 2 System 3 1 Windows Data Reationship Management appication server Windows primary Foundation Services instance Windows Data Reationship Management CSS Bridge N/A N/A 2 Windows Data Reationship Management appication server Windows primary Foundation Services instance N/A Windows Data Reationship Management CSS Bridge 3 Windows Data Reationship Management appication server Windows secondary Foundation Services instance Windows Data Reationship Management CSS Bridge 4 Windows Data Reationship Management appication server Windows secondary Foundation Services instance Windows Data Reationship Management CSS Bridge Windows primary Foundation Services instance Unix/Linux primary Foundation Services instance N/A N/A 5 Windows Data Reationship Management appication server Unix/Linux primary Foundation Services instance Windows secondary Foundation Services instance Windows Data Reationship Management CSS Bridge 20

21 Instaing Data Reationship Management The Data Reationship Management instaer requires Run As Administrator rights in order to execute propery. Before instaing Data Reationship Management, review Figure 1 on page 12. ä To insta Data Reationship Management: 1 Navigate to the directory where you downoaded the instaation program, right-cick setup.exe and seect Run as administrator. 2 Seect the anguage for the instaation and cick OK. 3 If you do not aready have Microsoft.NET Framework 4.5 instaed, cick Insta to insta it. You must have an internet connection for the.net instaation to compete. 4 On the Wecome diaog box, read the icense agreement and cick Next. 5 Cick Next to accept the defaut instaation directory for Data Reationship Management fies, or cick Change, seect an instaation ocation and then cick Next. 6 On the Setup Type diaog box, seect the type of instaation to perform and cick Next: Compete Instas the Appication Server, CSS Bridge, Web Server, Migration Utiity, Batch Cient, and the documentation. Custom Aows you to seect the components to insta. You can seect from the foowing components: m m m m m m DRM Appication Server Core engine and server fies DRM CSS Bridge Data Reationship Management connector for Shared Services DRM Web Server Primary Web appication for Data Reationship Management users DRM Migration Utiity Web appication for managing appication tempates DRM Documentation Links to onine documentation DRM Batch Cient Windows consoe cient for running batch operations 7 Do one of the foowing: If you seected Compete, skip to the next step. If you seected Custom, on the Custom Setup diaog box seect the features to insta and cick Next. 8 Cick Insta. 9 Cick Finish. A features are seected by defaut. Deseect the features that you do not want to insta. 21

22 To create and configure Data Reationship Management appications, seect the option to aunch the Data Reationship Management Configuration Consoe. Instaing Data Reationship Management in a Distributed Environment See the foowing sections: Instaing Secondary Data Reationship Management Web Server Hosts Instaing Secondary Foundation Services Hosts Instaing Secondary Data Reationship Management Web Server Hosts To insta a secondary Data Reationship Management Web Server computer, insta the Data Reationship Management Web Server component on the secondary computer. See Configuring Foundation Services for Data Reationship Management. Instaing Secondary Foundation Services Hosts The foowing Foundation Services components must be instaed on the secondary Foundation Services instance using the EPM System Instaer: Foundation Services Web Appications Static Content Fies WebLogic Appication Server Troubeshooting For information on instaation troubeshooting, see the Orace Enterprise Performance Management System Instaation and Configuration Troubeshooting Guide. 22

23 2 Configuring Data Reationship Management In This Chapter Configuring Foundation Services for Data Reationship Management...23 Starting the Data Reationship Management Configuration Consoe...25 Configuring Data Reationship Management Appications...25 Saving Configuration Settings and Starting the Service on the Appication Server...39 Launching Data Reationship Management in a Web Browser...39 Configuring the Migration Utiity...40 Load Baancing Data Reationship Management Web Appications...41 Terminating SSL at the Web Server...42 Using Singe Sign On with Data Reationship Management...42 The Data Reationship Management Configuration Consoe is an appication server configuration utiity and is instaed automaticay when you insta the appication server component. You can open the consoe at the end of the instaation program. A Data Reationship Management servers and reated servers must be configured to activey synchronize to a common time source on the network. Unsynchronized servers wi ead to Web Services faiures for packaged integrations and other Data Reationship Management API usage. It wi aso increase the compexity for depoyment and operation of Data Reationship Management with its partner systems. Caution! A Data Reationship Management servers and reated servers must be configured to use the same the keystore in the same path on every server. Configuring Foundation Services for Data Reationship Management The Foundation Services instaation incudes severa components which must be depoyed and configured using the EPM Configurator too before Data Reationship Management can use them. See the "Configuration Sequence" section of the Orace Enterprise Performance Management System Instaation and Configuration Guide for information on the order in which components 23

24 shoud be configured. Refer to the "Configuring EPM System Products" section for instructions for performing the configuration of Foundation Services components. For more information, see: Configuring Secondary Foundation Services Hosts Configuring Shared Services with an Externa Provider Configuring Shared Services for Singe Sign On Configuring CSS Mode for Data Reationship Management Configuring Secondary Foundation Services Hosts The Windows Data Reationship Management service must be started and running on the CSS Bridge Host computer before starting the Data Reationship Management service on the appication server. If a secondary Foundation Services instance is utiized for the CSS Bridge, then: m m m m m The foowing Foundation Services components must be configured on the secondary Foundation Services instance using the EPM System Configurator: o o o o Configure Common Settings Configure Orace Configuration Manager Configure Database Depoy to Appication Server For the Seect the EPM Orace Instance to which the configuration woud be appied configuration, use the defaut or custom path for Home directory for EPM Orace instances; use the defaut for EPM Orace instance name. For the Set up Shared Services and Registry Database associated with the instance home configuration, seect the Connect to a previousy configured Shared Services database option, and provide the connection information for the database configured for the primary Foundation Services instance. For the Depoy to Appication Server/Specify WebLogic Domain configuration, seect the Depoy Web appications to a new domain option. After instaation and configuration, the EPM Web Appication Server does not need to be started or running on the secondary computer. See Data Reationship Management CSS Bridge. Configuring Shared Services with an Externa Provider To configure Shared Services, see Configuring OID, Active Directory, and Other LDAP-based User Directories in the Orace Enterprise Performance Management System User Security Administration Guide. 24

25 For deveopment purposes, Shared Services can be configured to use the WebLogic embedded LDAP server as an externa directory. For information, go to: technetwork/middeware/bi-foundation/resource-ibrary htm and seect EPM System Tips & Tricks 1-72 (PDF). In that document, see "Is it possibe to use the WebLogic embedded LDAP server as an externa directory for EPM System products?". Configuring Shared Services for Singe Sign On (SSO) See Configuring EPM System for SSO in the Orace Enterprise Performance Management System Security Configuration Guide. Configuring CSS Mode for Data Reationship Management The Data Reationship Management server must be configured for CSS Authentication mode or Mixed mode in order to authenticate users using Shared Services. See Configuring the CSS Bridge on page 34 and Configuring Authentication Settings on page 36. Starting the Data Reationship Management Configuration Consoe To open the Data Reationship Management Configuration Consoe, seect Start, then Programs, then Orace EPM System, then Data Reationship Management, then Configuration Consoe. Configuring Data Reationship Management Appications Data Reationship Management uses appications to manage data and serve user requests for accessing data. You can run one or more Data Reationship Management appications on a singe machine. Each appication and repository can be accessed by ony one active instance of Data Reationship Management appication server. Before configuring mutipe Data Reationship Management appications, review Figure 2 on page 13. See the foowing sections: Creating an Appication Setting the Appication Defaut Cuture Date, Time, and Number Formatting Creating a Repository Copying a Repository 25

26 Configuring Host Computers Configuring Authentication Settings Configuring EPM Registry Settings Configuring Schedued Tasks Removing an Appication Creating an Appication Data Reationship Management appications are created in the Configuration Consoe. At east one appication must be created. ä To create a Data Reationship Management appication: 1 In the Data Reationship Management Configuration Consoe, cick Add to create a new appication. 2 On the Configuration tab, configure the repository. If you have not created a repository, or need to upgrade the repository, you need to use the Repository Wizard. See Creating a Repository on page Cick Save Configuration. 4 From the Loca Service menu, cick Start to start the Data Reationship Management service. When you add a new appication, the appication is created with standard defaut parameters. The defaut appication name is generated from the computer name. Setting the Appication Defaut Cuture You can set the defaut cuture used for each Data Reationship Management appication. The defaut cuture is used for ocaization of the Web cient if the setting cannot be determined from the Web browser. ä To set the defaut cuture for an appication: 1 In the Data Reationship Management Configuration Consoe, seect an appication. 2 From Defaut Cuture seect an option: en-us Engish fr-fr French de-de German ja-jp Japanese ko-kr Korean zh-chs Simpified Chinese 26

27 Date, Time, and Number Formatting Formatting of date, time, and number property data vaues in the Data Reationship Management user interface is determined by two factors: The anguage setting of the Data Reationship Management cient computer's browser The Regiona Options settings defined for the Data Reationship Management service ogon account on the Data Reationship Management appication server computer. The Data Reationship Management Web Cient session information incudes the user's cuture as defined in the browser's anguage setting. The data vaue formatting dispayed at the cient for the requested cuture is determined by how the corresponding cuture formatting is defined on the Data Reationship Management server for the Regiona Options of the DRM service ogon account. The cient operating system's Regiona Options settings do not affect data formatting in the user interface. Simiary, the Data Reationship Management Batch Cient parameter "/CutureName" aows you to specify the cuture format as you woud via the browser anguage. And as with the Web cient, the data vaue formatting is determined by how the corresponding cuture is defined on the Data Reationship Management server for the Data Reationship Management service ogon account. For Exampe AData Reationship Management Web Cient browser anguage is set to "en-us". You are ogged into the Data Reationship Management server as the Data Reationship Management service ogon account and the corresponding Regiona Options cuture "Engish (United States)" has the short date format "MM/dd/yyyy". Dates in the Data Reationship Management cient user interface are dispayed in the format "MM/dd/yyyy". The defaut ogon account for the Data Reationship Management Server Processes service is "Loca System". To view or customize the Regiona Options used by Data Reationship Management, the Data Reationship Management service ogon account shoud be changed from Loca System to a oca Administrator account. This enabes you to og onto the server as the service account and view or modify the Regiona Options that the Data Reationship Management service uses. Creating a Repository The Repository Wizard in the Configuration Consoe aows you to create a new repository or upgrade a repository. For information on upgrading, see Upgrading an Existing Data Reationship Management Appication on page 60. Caution! Each Data Reationship Management appication needs it own repository. Two appications shoud never be configured to use the same repository. ä To create a new repository: 1 Cick the Repository Wizard button. 27

28 2 Seect Create a new repository. 3 Cick Next. Optiona: Seect Estimate size based on existing repository to create a new repository based on the size of an existing repository. Optiona: Seect Generate SQL scripts to create and downoad database creation scripts to run at a ater time 4 Do one of the foowing: If you are generating scripts, go to Generating SQL Scripts on page 30. If you seected any other option in the previous step, continue to the next step. 5 Do the foowing: Seect the database provider: Orace or SQL Server. Enter the connection to the target database where the new repository wi reside. Enter the user ID and password for an administrator who has rights to create a database schema and data fies. For SQL Server, ony SQL accounts are supported. Optiona: For Connection Timeout, enter the number of seconds to wait for a connection to open before canceing the attempt and generating an error. The defaut is 60 seconds. For Command Timeout, enter the number of seconds to wait for a command to execute before canceing the command and generating an error. The defaut is 900 seconds. 6 Cick Next. Setting the timeout vaue to zero indicates no timeout is used. These settings are saved in the drm-config.xm and are used by the engines when they start. To perform arge operations (such as a arge version deete), set the Command Timeout to a arger vaue than the defaut. Cick Test Connection. 7 Do one of the foowing: For an Orace database, continue to the next step. For a SQL Server database, go to Creating a SQL Server Database on page Enter the user id and password which wi be created as the schema owner for the Data Reationship Management repository. 9 Accept the defaut tabespace settings or make changes and cick Next. It is highy recommended that dedicated tabespaces be used for Data, Indexes, Transactions, and Properties. The defaut tabespace names may aready be in use, and wi be re-used if a new tabespace name is not specified. 10 On the Appication Administrator Creation page, enter a password for the Administrator user and cick Next. 28

29 11 On the Create Repository Confirmation page, review the settings and cick Next to start the creation process. When the database has been created a success message is dispayed. 12 Cick Next. Tip: Repository creation, copy, and upgrade information is written to the Repository Wizard og. Cick Save Log on the Repository Operation Compete page of the wizard to save the og fie. 13 On the Repository Operation Compete screen, cick Finish. You are returned to the main screen of the consoe where you can review the settings. If you entered the Repository Wizard from the menu bar, Finish returns you to the first page of the wizard. If you entered the wizard from the button on the appication tab, cicking Finish appies the settings to the seected appication. If you cick Cance, the repository is sti created, but the settings are not appied to any appication. The new database is appied when you save the configuration. 14 Cick Save Configuration, otherwise connection information is ost when the consoe is cosed. Creating a SQL Server Database ä To configure a SQL Server database for the Data Reationship Management repository: 1 Enter the user id and password which wi be created as the ogin for the Data Reationship Management database. Caution! When creating a database user name or password, you cannot use the foowing symbos: at (@), sash (/), comma (,), and coon (:). 2 Enter the name of the database to create to hod the Data Reationship Management repository. Caution! Database names cannot begin with a number. 3 Do one of the foowing and then cick Next: Seect Use server defauts for data fies to use defaut settings for the path to and size for the database and og fie. Enter the path to and size for the data fie and og fie. 4 On the Appication Administrator Creation page, enter a user name and password for the Administrator user and then cick Next. 5 On the Create Configuration page, review the target repository information, and then cick Next. After the repository is created, you can save the og. 6 Do one of the foowing: 29

30 Cick Finish to appy the changes to the current appication. You are returned to the main screen of the consoe where you can review the settings. Cick Cance to exit the wizard. 7 Cick Save Configuration, otherwise connection information is ost when the consoe is cosed. Generating SQL Scripts You can generate SQL scripts from which you can manuay create a repository. When you save the scripts, you are not required to provide repository connection information. ä To generate SQL scripts: 1 Cick the Repository Wizard. 2 Seect Generate SQL scripts and cick Next. 3 Seect the Orace or SQL Server tab and enter repository information. 4 Cick Next. 5 On the Repository Creation Script screen, cick Save to Fie and navigate to a foder in which to save the fie. 6 Cick Next. The fie name for both Orace and SQL Server databases is drm-createdatabase.sq. 7 On the Repository Object Creation Script screen, cick Save to Fie and navigate to a foder in which to save the drm-create-schema-objects.sq fie. 8 Cick Next. 9 Cick Finish. Manuay Running Database Scripts Based on your oca security procedures, creating a new database may require a eve of access that is not avaiabe to the user instaing Data Reationship Management. Thus, during the instaation, there is an option to save the database scripts to disk rather than running them automaticay. The scripts can then be run separatey by the appropriate database administrator. ä To manuay run scripts: 1 Log into the database server as a user with database administrator privieges. 2 Run the scripts in the foowing order: drm-create-database.sq drm-create-schema-objects.sq 3 After a scripts have been successfuy run, open the Data Reationship Management Configuration Consoe. 30

31 4 Cick Add. 5 On the Repository Configuration tab, enter the service connection information and cick Save Configuration. You can cick Test Connection to verify connectivity. This competes the manua creation of the Data Reationship Management repository. 6 Seect the appication from the Appications ist. The database is automaticay initiaized the first time the appication is started. Copying a Repository The Repository Wizard in the Configuration Consoe provides the abiity to copy a repository from a current reease to a different repository running on the same or a different database provider. Copy path option 1: Run the Create a New Repository and Copy or Upgrade an Existing Repository options simutaneousy. Refer to the description on the Repository Wizard Source Connection page for important information on the different copy methods for a current reease repository. Copy path options 2: 1. Run the Create a New Repository option or manuay run the create repository SQL scripts. 2. Run the Copy or Upgrade an Existing Repository option using the new repository created in step 1 as the target connection. Configuring Host Computers Data Reationship Management server components can operate on one or more host computers. The Configuration Consoe enabes you to configure host computers for each server component. For configuration detais, refer to the appicabe host computer section: Configuring an Engine Host Configuring the API Adapter Configuring Web Servers Configuring the CSS Bridge Configuring an SMTP Server 31

32 Configuring an Engine Host ä To configure an engine host computer: 1 In the Configuration Consoe, seect Host Machines and on the Engine tab, enter the computer name and port number. 2 For Engine Startup Timeout, enter the number of seconds to wait when starting a Data Reationship Management engine process. If the engine does not respond within the number of seconds, an error is ogged in the Windows Event Log. Configuring the API Adapter The API Adapter component is incuded with the Data Reationship Management Appication Server instaation component. Enabe the API Adapter if you are going to access Data Reationship Management using the Web Services API. ä To enabe the API adapter host: 1 In the Configuration Consoe, seect Host Machines and then API Adapter. 2 Do the foowing: Seect Enabe API Adapter. Enter the port number for the host. Enter the SSL certificate name. 3 Cick the Test URL ink to verify that the ink is vaid. Configuring Web Servers On the UI Web Servers tab, ist the servers that are configured to run the Data Reationship Management Web cient appication. On this tab, you can aso: Configure additiona Web server attributes for cacuating node URLs on the Web Farm tab. Set up anonymous profies which aow access to the Web cient via a custom URL without the user having to og in on the Anonymous Profies tab. ä To configure Web Servers: 1 In the Configuration Consoe, seect Host Machines and then UI Web Servers. 2 On the Host Servers tab, enter the name of the server(s) that are configured to run the Data Reationship Management Web cient appication. 32

33 Caution! The computer name must be isted here in order for the appication to be dispayed in the appication ist for the Data Reationship Management Web cient when a user ogs into Data Reationship Management. 3 On the Web Farm tab, do the foowing: a. In Host Name, enter the computer name to be used for a cacuated node URLs b. Enter the host port number. The defaut is 80. c. In Path, enter the directory appication path for the Data Reationship Management ogon page. The defaut is d. Seect Uses SSL to use computed URLs. Otherwise, is used. e. Cick the Test URL ink to verify that the ink is vaid. 4 On the Anonymous Profies tab, do the foowing: a. Enter a name in the Add Profie text box. b. Cick the pus sign ( + ) to add the profie to the ist of profies. c. Enter ogin credentias for the profie. d. Cick Save Profie to vaidate and save the new profie in memory. e. Cick Save Configuration to permanenty save the profie to the Data Reationship Management configuration. A profies on this tab are saved to the servers on the Host Servers tab. The anonymous access URL is created in this format: For exampe, app=drmapp1&ogin=anonuser1 Configuring Hosted Hep Onine hep content for Data Reationship Management is served from a centra Orace downoad ocation, which reduces the downoad and instaation time for Data Reationship Management. If users wi not have internet access, you can choose to insta and configure the Hep feature in your own environment. During the instaation process, seect the "DRM Documentation" component to insta the Hep feature on the Data Reationship Management Web server. 33

34 If you require accessibe Hep that is Section 508 compiant, you must insta and configure Hep to run ocay. ä To configure the Hep feature to run on the Data Reationship Management Web server: 1 In the Configuration Consoe, seect Host Machines and then seect UI Web Servers. 2 On the Hosted Hep tab, seect Use Locay Hosted Hep. 3 In Hep Base URL, enter the URL as documentation where Web_Server_Name is the name of the host machine. The Hep Base URL points to the root of the virtua foder on a Web server where the hep can be accessed internay. The documentation foder can be transferred manuay to another Web server, and the Hep Base URL woud need to be updated to point to the correct root URL. 4 Cick the test URL to verify the ink. 5 Save the changes to the consoe. Configuring the CSS Bridge ä To configure the CSS Bridge: 1 In the Configuration Consoe, seect Host Machines and then CSS. 2 On the Genera tab, configure the foowing options: Enabe CSS Bridge Seect to enabe CSS Enabe SSO Seect to enabe Singe Sign On. For information on SSO, see Using Singe Sign On with Data Reationship Management on page 42. For information on setting authentication settings, see Configuring Authentication Settings on page 36. CSS Bridge Host Enter the name of the Shared Services computer that wi be running the Data Reationship Management CSS Bridge component that is required for Data Reationship Management to communicate with Shared Services. For more information, see Data Reationship Management CSS Bridge and Configuring Secondary Foundation Services Hosts. When propery configured, the drm-netjnibridge-host.exe process wi be aunched on the CSS Bridge Host. Refer to the Windows event ogs on the CSS Bridge Host and Data Reationship Management computers to troubeshoot configuration issues. JVM Path The path to the java virtua machine (jvm.d). Defaut ocation for 64-bit is C:\Orace\Middeware\jdk160_35\jre\bin\server\jvm.d. Defaut ocation for 32-bit is C:\Orace\Middeware\EPMSystem11R1\common\JRE\Sun \1.6.0\bin\server\jvm.d 34

35 Orace Instance The path for the EPM instance. Defaut ocation is C:\Orace \Middeware\user_projects\epmsystem1. A settings on the Genera and Cass Path tabs are reative to the CSS Bridge Host computer which is not necessariy the Data Reationship Management appication server. 3 On the Cass Path tab, enter the paths to the required.jar fies. These paths must be modified for the user's environment. Exampes of cass paths are: C:\Orace\Middeware\EPMSystem11R1\products \DataReationshipManagement\server\jar\awbuti.jar C:\Orace\Middeware\EPMSystem11R1\products \DataReationshipManagement\server\jar\cassecurity.jar C:\Orace\Middeware\EPMSystem11R1\products \DataReationshipManagement\server\jar\drm-epm-registry.jar C:\Orace\Middeware\EPMSystem11R1\common\jib\ \epm_j2se.jar C:\Orace\Middeware\wserver_10.3\server\ib\wsqserver.jar C:\Orace\Middeware\modues\javax.servet_ _2-5.jar Configuring an SMTP Server The Data Reationship Governance feature uses emai notifications to notify governance users and data managers of requests activities. You must enabe and configure SMTP Server settings for Data Reationship Governance notifications to work. An SMTP server must be set up ocay or be remotey accessibe by the Data Reationship Management appication server. ä To configure an SMTP server: 1 In the Configuration Consoe, seect Host Machines and then SMTP Server. 2 Seect Enabe SMTP. 3 Specify the host name of the SMTP server and the port number. 4 Specify the SMTP port number. 5 Optiona: Seect Use SSL to use computed URLs. Otherwise, is used. 6 Optiona: Seect Requires SMTP Authentication and enter the user name and password for the SMTP server. 7 Enter the sender name which wi dispay in the emai From fied. 8 Enter the sender emai address. 35

36 Configuring Authentication Settings On the Authentication Settings tab, you can seect the authentication type, modify interna authentication poicies and set ockout parameters for users. ä To configure authentication settings: 1 In the Configuration Consoe, seect Authentication Settings and then cick Load Settings to popuate the current settings as saved in the Data Reationship Management system preferences. 2 Seect the method for authentication: Interna Managed fuy by Data Reationship Management. CSS (Common Security Services) Centraized support for externa user directories using Shared Services. Mixed Aows authentication option (Interna or CSS) to be specified by the user. 3 Set password preferences: Expiration Period (days) Number of days that a user's password is vaid. Maximum Length Maximum ength for user passwords; zero indicates no maximum. Minimum Length Minimum ength for user passwords; zero indicates no minimum Warning Period Positive or negative number to indicate how many days before (-) or after (+) the password expiration date to warn users to change their password before no onger aowing them to og in. 4 Set user ockout preferences: Inactivity Threshod Maximum number of days of inactivity before a user is ocked out. Invaid Logins Aowed Maximum number of invaid og in attempts before a user is ocked out. 5 Cick Save Settings. Configuring EPM Registry Settings Data Reationship Management configuration settings must be registered in the Shared Services EPM Registry to enabe the foowing optiona features: Integration with EPM Architect Integration with EPM Mobie The Data Reationship Management appication and Orace Hyperion EPM Architect must be registered to the same Shared Services instance. You can unregister an appication by cicking Unregister. To unregister an appication, the CSS Bridge must be enabed and the appication that you are unregistering must be running. 36

37 ä To register a Data Reationship Management appication: 1 Ensure that you have enabed the API adapter and CSS bridge for the Data Reationship Management appication and set the authentication setting to CSS or Mixed. See Configuring API Adapter Hosts, Configuring the CSS Bridge, and Configuring Authentication Settings. 2 In the Configuration Consoe, seect EPM Registry and then on the Appication tab specify the Data Reationship Management Web service by providing this information: HTTP or HTTPS protoco Host computer name of the Web service Port number Appication context Name of the WebLogic appication for the Web service This information is combined into a URL; for exampe, servername:managedserverport/orace-epm-drm-webservices where http is the protoco, servername is the host computer name of the Web service, managedserverport is the port number of the managed server, and orace-epm-drmwebservices is the name of the WebLogic appication for the Web service. 3 Specify the Data Reationship Management user credentias used for the integration. 4 Cick Register. ä To register a Data Reationship Management Web appication for EPM Mobie: 1 Ensure that you have done the foowing: Depoy the orace-epm-drm-rest-webservice.ear fie to a managed server; in most cases the Web appication can be depoyed to the EPMServer0 managed WebLogicserver. Enabe the API adapter and CSS bridge for the Data Reationship Management appication and set the authentication setting to CSS or Mixed. See Configuring API Adapter Hosts, Configuring the CSS Bridge, and Configuring Authentication Settings. Register the Data Reationship Management Appication with the EPM Registry. 2 In the Configuration Consoe, seect EPM Registry and then seect Web Appication. 3 Provide the foowing information: Seect http or https protoco Enter the host computer name of the REST Web Services appication and the port number to which orace-epm-drm-rest-webservice is depoyed. In most cases, the service wi be depoyed to the managed server EPMServer0; suppy the port for this managed server. If the EPM Server has been configured with a ogica address then suppy the port number that was used during that configuration. 37

38 In most cases, the Appication Context can be eft to the defaut: orace-epm-drm-restwebservices. 4 Cick Register. This information is combined into a URL; for exampe servername:ogicaportnumber/orace-epm-drm-rest-webservices where http is the protoco seected, servername is the host computer name of the Web service, ogicaportnumber is the port number that was configured for the EPM Workspace appication, and orace-epm-drm-rest-webservices is the name of the WebLogic appication for the Web service. Configuring Schedued Tasks The Task Runner component handes the execution of schedued processes which run in the background on the Data Reationship Management appication server. The Configuration Consoe enabes you to define settings for schedued tasks. Purging Deeted Version Records Database records for deeted versions are permanenty removed from the Data Reationship Management repository as a schedued task. This process reduces the impact on performance of other system operations by aowing the deete process to be run during periods of ow system usage. An administrator can configure frequency and backout settings for the purge process. ä To permanenty deete a version-reated records for versions that have been marked for deetion: 1 In the Configuration Consoe, seect an appication and then seect Schedued Tasks. 2 Cick Load Settings to popuate the current settings as saved in the Data Reationship Management system preferences. 3 Enter a number for the frequency of the purge and then seect the unit of time as hours, minutes, or seconds. 4 Optiona: To set a backout window when schedued purges shoud not run, enter the start time for the backout and then seect how ong (in hours) the backout shoud ast. 5 Cick Save Settings. Removing an Appication You can remove an appication when it is no onger usefu. To remove an appication, right-cick the appication and seect Remove. 38

39 Saving Configuration Settings and Starting the Service on the Appication Server Changes made in the Configuration Consoe must be saved and the Data Reationship Management service must be restarted for these changes to take effect. The configuration consoe runs on the appication server. ä To save settings and start the Data Reationship Management service on the appication server: 1 In the Configuration Consoe, cick Save Configuration. 2 From the Loca Service menu, cick Start. Caution! The Orace DRM Server Processes service on a secondary servers MUST be started and running BEFORE starting the Orace DRM Server Processes service on the appication server. Launching Data Reationship Management in a Web Browser ä To aunch Data Reationship Management in a Web browser: 1 Cick Start, then Programs, then Orace EPM System, then Data Reationship Management, and then Web Cient 2 Log in with the ADMIN user ID and password defined during the Repository Wizard process, or an existing user in an upgraded repository. If you manuay created the repository from scripts, the password is Wecome!. Disabing Compatibiity View Mode in Internet Exporer Data Reationship Management does not support Compatibiity View mode offered in Microsoft Internet Exporer. ä To disabe this feature: 1 In Internet Exporer, seect Toos, and then Compatibiity View Settings. 2 Make sure that the foowing options are not seected: Dispay intranet sites in Compatibiity View Dispay a websites in Compatibiity View 39

40 3 Cick Cose. Configuring the Migration Utiity The foowing tabe describes Migration Utiity configuration settings in the appsettings section of the web.config fie. This fie is ocated in the foowing directory by defaut: C:\Orace \Middeware\EPMSystem11R1\products\DataReationshipManagement\cient \migration-cient Any changes made to the web.config fie wi require a restart of the Web site in IIS to take effect. Tabe 2 Key Configuration Settings Description configuredservers maximumexceptionsonimport showexceptiondetai enabeaboutpage Specifies the admin-configured connections. Defaut vaue is net.tcp://ocahost:5210/orace/drm/processmanager where ocahost is the computer and 5210 is the configured process manager port. If the Continue After Error option is seected, specifies the maximum number of exceptions that can be generated during a oad. Specify an integer greater than 0. The defaut vaue is Specifies whether detaied exception information is dispayed on the error page. Caution! Showing fu detais may present a security risk, as the detaied information may incude fie paths or other sensitive information. This setting shoud ony be enabed for debugging or testing. Specify True to enabe exception detai or Fase to dispay detai according to the og4net settings. The defaut vaue is Fase. Specifies whether the About page is enabed. The About page dispays the version of the Migration Utiity and system components; for greater security, this page is disabed by defaut. To check the version of the Migration Utiity you can enabe this page. To enabe the page but restrict access to administrators, edit the Discretionary Access Contro List (DACL) on the /Forms/About.aspx fie. See the IIS documentation for more information about how DACLs, Directory Security, and anonymous access interact to contro access to Web pages. Specify True to show the About page. The defaut vaue is Fase. For more information, see Increasing Upoad Fie Size. Increasing Upoad Fie Size The defaut imit for upoaded fies is 4 MB. To change the defaut imit to 20 MB, add this setting in the <system.web> eement of the web.config fie: <httpruntime maxrequestlength="20480" executiontimeout="3600" /> 40

41 By defaut, the web.config fie is ocated in C:\Orace\Middeware \EPMSystem11R1\products\DataReationshipManagement\cient \migration-cient. Load Baancing Data Reationship Management Web Appications You can configure Orace HTTP Server to provide oad baancing support to two or more Data Reationship Management Web appications. You set up Orace HTTP Server to redirect requests to the IIS servers hosting the Data Reationship Management Web cient. This procedure assumes that the Orace HTTP Server instaed by the EPM System Instaer is the ogica host. The EPM System Instaer performs the necessary prerequisite checks for Orace HTTP Server. For more information, see the Orace Enterprise Performance Management System Instaation and Configuration Guide. ä To set up Orace HTTP Server as a oad baancer for the Data Reationship Management Web cient: 1 Insta the Data Reationship Management Web Server component on two or more computers running IIS. 2 Configure Data Reationship Management appications and host computers using the procedure described in Configuring Data Reationship Management Appications on page Open the httpd.conf fie for Orace HTTP Server found in the foowing ocation: MIDDLEWARE_HOME/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ ohs_component/httpd.conf 4 Ensure that the foowing directives exist and are enabed. Add the directives if they do not exist. LoadModue proxy_baancer_modue ${ORACLE_HOME}/ohs/modues/ mod_proxy_baancer.so LoadModue headers_modue ${ORACLE_HOME}/ohs/modues/ mod_headers.so 5 Create a proxy baancer definition for the Data Reationship Management Web cient by adding a BaanceMember directive for each IIS server that hosts the Data Reationship Management Web Server component. #Configure members for custer <Proxy baancer://iisdrm> BaancerMember route=server1 BaancerMember route=server2 </Proxy> 6 Enabe sticky oad baancing by adding the foowing directives. These sampe directives instruct Orace HTTP Server to insert a cookie that keeps track of the route for sticky oad baancing of the proxy baancers defined in the previous step. Header add Set-Cookie "BALANCEID= iisdrm.%{balancer_worker_route}e; path=/drm-webcient;" env=balancer_route_changed 41

42 7 Add the foowing Forward and Reverse Proxy directives. #The actua ProxyPass ProxyPass /drm-web-cient baancer://iisdrm stickysession=balanceid nofaiover=off #Do not forget ProxyPassReverse for redirects ProxyPassReverse /drm-web-cient ProxyPassReverse /drm-web-cient 8 Save the httpd.conf fie and restart the Orace Process Manager server for the Orace HTTP Server instance. After configuration, the Data Reationship Management web appication can be accessed using the foowing URL: Terminating SSL at the Web Server You can use SSL secure communication from a cient's Web browser and the IIS Data Reationship Management Web appication drm-web-cient using Orace HTTP Server (OHS). In this configuration, the cient s browser communicates with OHS via the HTTPS protoco and OHS acts as a proxy and communicates with the Data Reationship Management Web appication via HTTP. See Terminating SSL at the Web Server in the Orace Enterprise Performance Management System Security Configuration Guide. Using Singe Sign On with Data Reationship Management Singe Sign On (SSO) for Data Reationship Management requires various components to be instaed and configured. In a typica Web SSO environment, a Web identity management soution contros authentication and authorization for one or more independent software systems. The goa of SSO is to aow a user to gain access to the various independent systems without being prompted for a ogin for each system. Data Reationship Management impements SSO by utiizing Shared Services, a web identity management soution (such as Orace Access Manager), and an externa user directory (such as Orace Internet Directory or Microsoft Active Directory). A mix of SSO and non-sso appications is not supported on a singe server. Use the foowing steps to insta and configure SSO: Task Reference 1. Configure Shared Services with an externa user directory. See Configuring OID, Active Directory, and other LDAP-based User Directories in the Orace Enterprise Performance Management System User Security Administration Guide. 42

43 Task Reference 2. Configure Shared Services for SSO. See Configuring EPM System for SSO in the Orace Enterprise Performance Management System Security Configuration Guide. 3. Insta Data Reationship Management. See Instaing Data Reationship Management on page In the Data Reationship Management Configuration Consoe, configure Data Reationship Management for CSS authentication mode and enabe SSO. 5. Configure a Web identity management soution to protect the Data Reationship Management Web appication and use the same externa user directories configured in Shared Services. See Configuring Host Computers on page 31. See Web Access Management on page 43. For more information, see Web Access Management. Web Access Management The Data Reationship Management Web appication resources must be protected so that any request to the Web appication is redirected to a Web access management appication, such as Orace Access Manager. After a user authenticates with the security agent using basic authentication, the agent forwards the request to the Data Reationship Management Web appication where HTTP header information is passed to the Data Reationship Management server for authentication. Orace Access Manager Orace Access Manager (OAM) provides authentication and authorization for the Data Reationship Management Web appication. In this documentation, it is assumed that OAM has been instaed and configured with access poicies for the Data Reationship Management Web appication. For more information, see Configuring the Access System and Protecting Resources in the OAM Access Administration Guide. Data Reationship Management can be configured with Orace Access Manager using one of the foowing options: Insta and configure Orace Access Manager 10g Webgate for IIS on the Data Reationship Management Web server Set up Orace HTTP Server for oad baancing the Data Reationship Management Web server and insta Orace Access Manager 11g Webgate for OHS The WebGate modue intercepts HTTP requests for Web content on the web server and forwards the requests to Orace Access Manager. For the Orace Access Manager 10g Webgate for IIS downoad, see the Readme fie for Orace Access Manager 10g non OHS 11g Webgates and 3rd Party Integrations at The foowing graphic depicts the process fow with Orace Access Manager using the 10g Webgate for IIS on the Data Reationship Management Web server: 43

44 44