ECL Portal. Standardized SCADA solution for ECL Comfort 310. Data sheet. Description

Transcription

1 Standardized SCADA soution for ECL Comfort 310 Description The is an effective turnkey SCADA (Supervisory Contro And Data Acquisition) too for professiona users ike service personne of district energy stations to streamine service, commissioning, maintenance and contro tasks. Service eve can be increased and/or service costs reduced. Professiona users have access to a hotine for oca support i.e. hep on features of the and Smartphone apps which seem not to be functioning propery, troubeshooting on how to get the ECL Comfort 310 controer connected to the internet and or expanations of the features of the ECL Comfort 310 controer and in genera. However, no consuting services regarding the behavior of specific instaations, optimizations etc. are incuded in the support. The is aso a vauabe too for private end users of district energy stations for monitoring energy consumption and to adjust temperature settings. Private end users do not have hotine support incuded but are instead encouraged to use the documentation avaiabe onine. By providing a user friendy graphica interface to energy consumption data, temperatures and fow, the end user s awareness of the energy consumption increases thereby owering the energy consumption. The heating instaation is made accessibe from virtuay anywhere at any time via aptops or Smartphones which increases service eve and reduces response time to aarms. DEN-SMT/PL VD.HX.C1.02 Danfoss 01/2013 1

2 Key features: User accounts Each user has a User Account with ogin information. Private end users are abe to create a user account and get access to the basic features of the ECL Porta. A one-time icense fee is charged. Professiona users are abe to create a user account and get access to a of the advanced features of the. An annua icense fee is charged. Appication overview The appication seected on the ECL Comfort 310 is automaticay depicted on the main screen of the. A ECL Comfort 310 Controers avaiabe to the user are grouped in the eft pane for easy navigation. Current sensor vaues and reference settings are shown on the screen. Pump and vave symbos are automaticay updated to refect current state (on/off, opened/cosed). The specific appication variant can be chosen in the ECL Edit menu. Data ogging Vaues from up to 14 sensors used by the appication, e.g. temperature and pressure are ogged with a 15 min interva and stored on the for a period of 3 months. Sensors connected to the inputs of the ECL Comfort 310 controer which are not used by the appication can be configured and ogged with a 1 hour interva. Vaues from energy consumption sensors and meters are ogged with a 1 hour interva and stored on the for a period of 5 years. A ogged data can be viewed on the or exported to a fie, e.g. CSV, XLS, PDF, RTF or XML. A data are backed up each 48 hours. Trend curves Graphs for a or any seected sensors can be shown on the screen. The graphs are based on the ogged data. The user can create custom graphs for meters and sensors. The cursor can be dragged to any ocation on the graph to read numerica vaues of the sensors at a specific time. Aarming Min and/or Max imits can be specified for a vaues from meters and the sensors used by the appication (max 14). If a imit is exceeded then an aarm e-mai is automaticay sent to the user. ECL-aarms supported by the appication are aso supported by the. When the user ogs on to the then new aarms from a avaiabe ECL Comfort 310 Controers are shown on the screen. A ist of active aarms can be shown on the screen at any time. Settings Most of the settings in the ECL310 are made avaiabe on the. Changing the settings via the makes it possibe for the user to adjust parameters, optimize contro, override the automatic contro and specify hoiday schedues remotey. Live ECL View the dispay of the ECL Comfort 310 controer ive and save screenshots for documentation. Navigate the menus of the ECL Comfort 310 controer ive by turning and pressing the navigation whee from the. 2 VD.HX.C1.02 Danfoss 01/2013 DEN-SMT/PL

3 User benefits The is an effective turnkey SCADA too for service personne and administrators of district energy stations. The advantages of the are among others: Easy instaation - Automatic configuration makes instaation and commissioning easy -Supports ECL Comfort 310 and standard appication keys - No extra hardware or software instaation - Uses standard internet connection Easy access - Access to contro and monitor ocay and remotey - Smartphone apps for Android and ios Standard features -A standard features of a SCADA system are avaiabe (appication overview, monitoring and data ogging of sensor and meter vaues, trend curves, aarming, adjustment of ECL Comfort 310 parameters etc) Low tota cost -No initia investments -Low icense cost per ECL Comfort 310 -Low cost to system integration -Low cost to commissioning Appication A typica appication using the is shown beow. In this exampe a service provider uses his aptop and Smartphone with internet connection to monitor and contro the heating instaations and read the energy consumption in severa buidings using the (professiona user account). The buidings have instaed substations with ECL Comfort 310 controers and in each buiding one or more energy meters are connected to the ECL Comfort 310 controer to measure the energy consumption in each buiding. The ECL Comfort 310 controers are connected via Ethernet to the internet using the avaiabe LAN (Loca Area Network) in the buiding. The peope iving in the buidings are using their aptops to monitor their energy consumption via the (private end user accounts) and to set room temperatures and night setback schedues. A ECL Comfort 310 controers communicate via Internet with the server hosted by Danfoss. The server stores the sensor vaues and energy consumption data in its database. k j n k j m o k j j Private house k ECL Comfort 310 controer Ethernet network m Internet n server o Service provider s aptop Service provider s Smartphone Energy meters DEN-SMT/PL VD.HX.C1.02 Danfoss 01/2013 3

4 Supported controers The foowing controers are supported by the : Danfoss ECL Comfort 310 eectronic controer Danfoss ECL Comfort 310B eectronic controer Supported appication keys The supports the foowing appication keys for the ECL Comfort 310 controer (135 appication exampes in tota): A214/A314 A217/A317 A230 A237/A337 A247/A347 A260 A266 A267 A275/A375 A367 A376 A377 P330 (for Austria ony) Pease check for an updated data sheet as new appication keys are constanty added to the ist. Supported energy meters The supports the foowing energy meters except if otherwise noted: Danfoss Infoca 6 (Hydrometer Scyar INT6) Infoca 8 (Hydrometer Scyar INT8) Sonometer 1000 (Hydrometer Sharky) Sonometer 1100 (Hydrometer Sharky 775) M-ca (Hydrometer Ray) Brunata (HG cacuator) HGQ (not supported!) HGS HGP-SIV Hydrometer Hydro port puse (water, m-bus puse counter) Hydro port (water) Kamstrup Mutica 382 Mutica 401 Mutica 601 Mutica 801 Mutica 66C Mutica MIII Mutica 21 (water) SVM F4 (not supported!) Sensus HRI (m-bus modue for water meter) Itron Saia Cybe 1.4 (not supported!) Cybe 2.0 (not supported!) ALD1D5FM (not supported!) ALE3D5FM (not supported!) Landis+Gyr / Siemens VSD2 Utra Heat 50 2WR4 2WR5 2WR7 Pease be aware that battery operated energy meters are not recommended because the data communication wi shorten the battery ife time. 4 VD.HX.C1.02 Danfoss 01/2013 DEN-SMT/PL

5 Languages Language automaticay adapts to the ocation of the user based on the regiona settings of the user s computer. The foowing anguages are supported by the graphica user interface: Engish Danish Swedish German Poish User accounts Professiona users Professiona users have fu access to a the features of. Professiona users can register unimited amount of ECL Comfort 310 controers to the account. The icense for professiona users is paid annuay based on the amount of registered ECL Comfort 310 controers. The icense for professiona users aso incudes hotine for oca support i.e. hep on features of the and Smartphone apps which seem not to be functioning propery, troubeshooting on how to get the ECL Comfort 310 controer connected to the internet and or expanations of the features of the ECL Comfort 310 controer and in genera. However, no consuting services regarding the behavior of specific instaations, optimizations etc. are incuded in the support. Private end users Private end users wi use the for monitoring their energy consumption and temperatures and for adjusting basic parameters of the ECL Comfort 310 controer. A private end user has imited access to the features of the but wi be abe to: monitor current and reference sensor vaues monitor heat meters see trend curves for ogged data export ogged data to fies set schedue and hoiday programs set time & date set comfort and saving room temperatures set aarms A private end user can register a few ECL Comfort 310 controers to the account. The icense for private end users is paid once and covers ifetime (min 5 years) access to the ECL Porta. The icense for private end users does not incude hotine support. Ordering The is avaiabe at this address: The Smartphone apps can be downoaded for free via Appe AppStore (for ios based Smartphones) and Googe Pay Shop (for Android based Smartphones). The app is found by searching for ECL Porta. Private end user and professiona user accounts can be created for free. However, to register one or more ECL Comfort 310 controers to a user account a icense key is needed for each. It is possibe to register ECL Comfort 310 controers to user accounts for free for a imited tria period. During the tria period both professiona and private end users have fu access to the features of the. When the tria period is about to expire you wi receive instructions via e-mai about how to obtain and pay for icense keys. DEN-SMT/PL Type Designation Code no. License professiona user icense (per ECL Comfort 310) private end user icense (per 187B B0002 ECL Comfort 310) Controer ECL Comfort 310 Controer ¹) 087H3040 ¹) See separate data sheet for this component for ordering detais VD.HX.C1.02 Danfoss 01/2013 5

6 System requirements The requirements to the computer accessing the are: Operating system Microsoft Windows XP (SP3 with atest updates instaed) Microsoft Windows Vista (SP2 with atest updates instaed) Microsoft Windows 7 (SP1 with atest updates instaed) Macintosh OS (or newer) CPU RAM Free disc space Video Inte or AMD processor (>= 1,6 GHz) Minimum: 1 GB RAM 1 GB A windows certified graphics card and driver. Minimum resoution is 1280*1024 pixe Web browser Microsoft Internet Exporer 7 (or newer)* Googe Chrome 12 (or newer)* Mozia Firefox 3.6 (or newer)* Safari 4 (or newer)* * Must have the Microsoft Siveright pugin instaed to dispay the scaabe graphics. It is preinstaed in newer web browsers. In od web browsers this free pugin must be instaed manuay. Requirements to the ECL Comfort 310 connection to the Internet: Eectrica interface Ethernet, RJ45 connector Cabe type Standard Ethernet cabe (CAT 5) Max. bus cabe ength According to Ethernet standard Communication speed 10 Mbit/s 100 Mbit/s Network Star network according to the standard Ethernet impementation guideines Firewa Must aow TCP Port 502 (defaut for Modbus-TCP protoco) traffic to pass from the LAN to the WAN side. Requirements to the ECL Comfort 310 controer: Controer software Appication key software ECA 30 Remote Contro (optiona) ECL 310 controer must be software version 1.11 (or newer). If it is version then it wi automaticay be updated by the appication key to at east version If it is oder than version 1.11 then it cannot be used for (or newer) 1.30 (or newer) Requirements to the Smartphone: Operating system Appe ios 4 (or newer) Googe Android 2.1 (or newer) 6 VD.HX.C1.02 Danfoss 01/2013 DEN-SMT/PL

7 DEN-SMT/PL VD.HX.C1.02 Danfoss 01/2013 7

8 8 VD.HX.C1.02 Produced by Danfoss A/S 01/2013