The Modelithics SELECT Library For Cadence Virtuoso Spectre
|
|
|
- Shanon Burke
- 5 years ago
- Views:
Transcription
1 Accelerate Your Design Success! The Modelithics SELECT Library For Cadence Virtuoso Spectre (V17.0) The World s Best RF and Microwave Simulation Models
2
3 Table of Contents Compatibility... 4 Cadence... 4 Licensing... 5 SELECT Library... 6 ATC...6 Capacitors (4)... 6 CoilCraft...7 Inductors (2)... 7 Infineon...8 Schottky (1)... 8 KOA...8 Resistors (2)... 8 Murata...8 Capacitors (1)... 8 Nitronex...9 Transistor (1)... 9 Presidio...9 Capacitors (1)... 9 Toko...9 Inductors (1)... 9 Updates...9
4 Compatibility This version of the Modelithics SELECT library is compatible with the following simulator versions: Cadence Virtuoso IC6.1.7 Operating System Linux Format 64bit Spectre Operating System Linux Format 64bit
5 Licensing The Modelithics SELECT library and all of its components require a license to simulate. Version 17.0 of the Modelithics library does requires an updated (v17) license file. A free license is included in the installation. If you need an update license or would like a floating license contact the Modelithics sales team. This release uses FLEXlm version If you have a floating license you MUST update the FLEXlm binaries (lmgrd and mdlx vendor daemon). This is the same version used in v16. For floating license users please make sure that both the lmgrd and mdlx vendor daemon are version See the log file entries below for checking the version information. 9:09:14 (lmgrd) FlexNet Licensing (v build x64_n6)... 9:09:14 (mdlx) FlexNet Licensing version v build x64_n6 For dongle locked license holders the required driver version is 6.65 or later. Please make sure the driver is updated by selecting this option during installation. For additional information on configuring licensing for the Modelithics Library please see the User Manual or consult your IT department.
6 SELECT Library The Modelithics SELECT Library is a free collection of models from the other Modelithics libraries as well as some additional models. The SELECT library includes capacitors, resistors, inductors, amplifiers, diodes and filters. The models in this library utilize are same high-standards for measurements and extraction to provide a quality component. The models also include features such as substrate scaling, pad scaling, bias dependence and temperature scaling. Recent updates include the addition of X- Parameters* models. This is the initial release of the SELECT library in Cadence with the typical features associated with our library. Legacy models are also include for completeness so users with existing designs in other simulators can easily port to the Cadence library. Part Value Scalability Substrate Scalability Simulation Mode selection Pad Mode selection Pad scaling Orientation selectable For more information on these features and typical uses please see the User Manual included in this release. ATC Capacitors (4) 600S 600S Model Name: CAP-ATC S Part Values: pf Max. Freq. (GHz): 10 Substrate Scalable: 1 H/Er 16 mil Body Style: 0603 This model is not recommended for new designs. Use CAP-ATC S instead. Model Name: CAP-ATC S Part Values: pf Max. Freq. (GHz): 20 Substrate Scalable: 1 H/Er 16 mil Body Style: 0603 Pad Scalable: Yes Orientation: Selectable CAP-ATC S replaces the CAP-ATC S model and is recommended for new designs.
7 ATC Capacitors (4) 800B 800B Model Name: CAP-ATC-800B-001-S Part Values: pf Max. Freq. (GHz): 10 Substrate Scalable: 1 H/Er 16 mil Body Style: Case B Pad Scalable: Yes Orientation: Selectable This model is not recommended for new designs. Use CAP-ATC- 800B-201-S instead. Model Name: CAP-ATC-800B-201-S Part Values: pf Max. Freq. (GHz): 20 Substrate Scalable: 1 H/Er 16 mil Body Style: Case B Pad Scalable: Yes Orientation: Selectable CAP-ATC-800B-201-S replaces the CAP-ATC-800B-001-S model and is recommended for new designs. CoilCraft Inductors (2) 0603CS 0603CS Model Name: IND-CLC S Part Values: nh Max. Freq. (GHz): 10 Substrate Scalable: 1 H/Er 8 mil Body Style: 0603 This model is not recommended for new designs. Use IND-CLC S instead. Model Name: IND-CLC S Part Values: nh Max. Freq. (GHz): 20 Substrate Scalable: 1 H/Er 16 mil Body Style: 0603 Pad Scalable: Yes IND-CLC S replaces the IND-CLC S model and is recommended for new designs.
8 Infineon Schottky (1) BAS40 Model Name:SKD-INF-ST S Non-Linear Yes Max. Freq. (GHz): 7 Substrate Scalable: 1 H/Er 16 mil Body Style: SOT-23 Temp. Scalable: C KOA Resistors (2) RK73x1J RK73x1J Model Name: RES-KOA S Part Values: K Ohm Max. Freq. (GHz): 9 Substrate Scalable: 3 H/Er 16 mil Body Style: 0603 This model is not recommended for new designs. Use RES-KOA S instead. Model Name: RES-KOA S Part Values: 0 1M Ohm Max. Freq. (GHz): 10 Substrate Scalable: 1 H/Er 16 mil Body Style: 0603 Pad Scalable: Yes RES-KOA S replaces the RES-KOA S model and is recommended for new designs. Murata Capacitors (1) GRM2165C2A, GRM21BR72A Model Name: CAP-MUR S Part Values: pf Max. Freq. (GHz): 9 Substrate Scalable: 1 H/Er 16 mil Body Style: 0805 Pad Scalable: Yes
9 Nitronex Transistor (1) NPT1012 Model Name:HMT-NIT-NPT S Non-Linear Yes Max. Freq. (GHz): 4 Substrate Scalable: No Body Style: AC200BM-F2 Temp. Scalable: 4 90 C Presidio Capacitors (1) BB0502X7R104M Model Name: CAP-PRS S Part Values: 100 nf Max. Freq. (GHz): 50 Substrate Scalable: 1.2 H/Er 13.6 mil Body Style: 0502 Toko Inductors (1) LL2012-FHL Model Name: IND-TKO S Part Values: nh Max. Freq. (GHz): 9 Substrate Scalable: 3.2 H/Er 13.6 mil Body Style: 0805 Updates This is the initial release.
USER MANUAL (V1.6.6) Non-Linear Models for QORVO GaN Transistors. For National Instruments AWR Design Environment
The World s Best RF & Microwave Simulation Models For National Instruments AWR Design Environment USER MANUAL (V1.6.6) Non-Linear Models for QORVO GaN Transistors Table of Contents WELCOME TO THE 1.6.6!...
ASH Transceiver 10 mw Power Amplifier Circuit Board
ETSI SRD regulations allow up to 10 mw of transmitter power at 33.92 MHz, and up to 25 mw of transmitter power at 868.35 MHz. For those applications where maximum range is of primary important and low
The Modelithics Qorvo GaN Library
Accelerate Your Design Success! The Modelithics Qorvo GaN Library (V1.6.6) The World s Best RF and Microwave Simulation Models Table of Contents Qorvo GaN Library... 4 New Models...5 Dies... 5 Dies Small
GRF4002. Released. Broadband LNA/Linear Driver GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/70mA/2.5 GHz EVB NF: 0.85 db Gain: 15.0 db OP1dB: 23.5 dbm OIP3: 36.5 dbm is a broadband low noise gain block designed for small cell, wireless infrastructure
Heterojunction Bipolar Transistor Technology (InGaP HBT) High Efficiency/Linearity Amplifier
Freescale Semiconductor Technical Data Heterojunction Bipolar Transistor Technology (InGaP HBT) High Efficiency/Linearity Amplifier The MMA20312B is a 2--stage high efficiency, Class AB InGaP HBT amplifier
Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 0 dbm per tone separated by 1 MHz. RFout
Device Features 3 ~ 3.3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-343 package Product Description BeRex s BGS6 is a high SiGe HBT MMIC amplifier,
GRF5110. Preliminary dbm Power-LNA Tuning Range: GHz. Product Description
Preliminary Product Description is a high linearity PA /Linear Driver with low noise figure (NF). It delivers excellent P1dB, IP3 and NF over a wide range of frequencies with fractional bandwidths of roughly
Development Board EPC9118 Quick Start Guide
Development Board EPC9118 Quick Start Guide EPC2001C/EPC2021 48 V Buck Converter Revision 1.0 DESCRIPTION The EPC9118 demonstration board is a 5 V output, 400 khz buck converter with a 20 A maximum output
Advanced Design System 1.5. Vendor Component Libraries murata Manufacturing Measurement-Based SMT Library
Advanced Design System 1.5 Vendor Component Libraries murata Manufacturing Measurement-Based SMT Library December 2000 Notice The information contained in this document is subject to change without notice.
G IP3=38. P1dB= Single. Units
Product Description SG0 SG0 is a high performance InGaP HBT amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current over temperature
GRF5020. Released dbm Power-LNA Tuning Range: GHz. Product Description. Features
Product Description Features Reference: 8.0V/95mA/2.5GHz Gain: 18.0 db NF: 0.85 db OP1dB: 29.0 dbm OIP3: 43.0 dbm Reference: 5.0V/65mA/2.5GHz Gain: 17.3 db NF: 0.80 db OP1dB: 24.5 dbm OIP3: 37.2 dbm is
Vendor Component Libraries murata Manufacturing Measurement-Based SMT Library
Vendor Component Libraries murata Manufacturing Measurement-Based SMT Library December 2003 Notice The information contained in this document is subject to change without notice. Agilent Technologies makes
Product Datasheet Revision: April 2014
ALP8 8 GHz Product Datasheet Revision: April 1 Applications W-Band Imaging Sensors Radar X =.mm Y =.8mm Product Features RF frequency: 8 GHz Broadband Operation Linear gain: 9 db, typical Noise Figure:
GRF2505. Released. Broadband LNA/Linear Driver 4.0 to 6.0 GHz. Product Description. Features. Applications
Product Description is a broadband, ultra-low noise, linear amplifier offering the highest levels of performance for demanding 802.11ac and wireless backhaul LNA and PA driver applications. Features Reference:
GRF2012. Released. Broadband Linear Gain Block 0.05 to 3.8 GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/90mA/900 MHz Gain: 14.8 db OIP3: 40.0 dbm OP1dB: 23.0 dbm NF: 2.7 db Reference: 8V/100mA/900 MHz is a broadband gain block with low noise figure and industry
GRF2133. Preliminary. Ultra-High Gain LNA Tuning Range: 0.1 to 2.7 GHz. Product Description. Features. Applications
Product Description is a broadband linear gain block featuring ultra-high gain and sub 0.85 db noise figure for small cell, cellular booster, wireless infrastructure and other high performance applications.
GRF2013. Released. Broadband Linear Gain Block 0.05 to 8.0 GHz. Product Description. Features. Applications
Product Description is a broadband gain block with low noise figure and high linearity designed for small cell, wireless infrastructure and other high performance applications. It exhibits outstanding
Data Sheet 6GX. MGA MHz MHz Flat Gain High Linearity Gain Block. Features. Description. Specifications. Applications.
MGA-30689 40MHz - 3000MHz Flat Gain High Linearity Gain Block Data Sheet Description Avago Technologies MGA-30689 is a flat gain, high linearity, low noise, 22dBm Gain Block with good OIP3 achieved through
HiPAC High Performance Actives & Passives on Chip
HiPAC High Performance Actives & Passives on Chip Passive Integration on Silicon Solutions & Target Components to be integrated Solutions Resistors Inductors Transformers Capacitors Diodes Transistors
GRF2073-W. Preliminary. Ultra-LNA: SDARS/Compenser/GPS. Product Description. Features. Automotive Applications
Product Description Features Reference: 5V/70 ma/2332.5 MHz Gain: 20.5 db NF: 0.40 db OP1dB: 19.8 dbm OIP3: 35.0 dbm is a linear, ultra-low noise amplifier designed for automotive satellite radio multi-stage
GRF4142. Preliminary. LNA/Driver w/bypass Tuning Range: 0.1 to 3.8 GHz. Product Description. Features. Applications
Product Description Features Reference: 3.3V/50mA/1.9 GHz Gain: 15.3 db is a low noise amplifier (LNA) with low loss bypass which requires only a single control input. It is designed for high performance
GRF2243. Preliminary. LNA with Bypass Tuning Range: 0.1 to 5.0 GHz. Product Description. Features. Applications
Product Description Features Reference: 3.3V/15mA/2.5 GHz Gain: 19.8 db EVB NF: 0.75 db is a low noise amplifier (LNA) with low loss bypass which requires only a single control input. It is designed for
GRF2072. Preliminary. Ultra-Low Noise Amplifier Tuning Range: GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/70mA/2.5 GHz Gain: 19.8 db Eval Board NF: 0.55 db OP1dB: 20.0 dbm OIP3: 37.5 dbm Flexible Bias Voltage and Current Process: GaAs phemt is a broadband, linear,
MBC13720 SiGe:C Low Noise Amplifier with Bypass Switch Device
Freescale Semiconductor Data Sheet: Technical Data Document Number: MBC13720 Rev. 4, 09/2011 MBC13720 MBC13720 SiGe:C Low Noise Amplifier with Bypass Switch Device MBC13720NT1 1 1 Refer to Table 1. Package
GRF4200. Preliminary. High Gain, Linear Driver Tuning Range: GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/35mA/1.9 GHz EVB NF: 4.0 db Gain: 21.5 db OP1dB: 18.0 dbm is a linear gain block designed for small cell, wireless infrastructure and other high performance applications.
Cree 300-W CCM PFC Demo Board
Cree 300-W CCM PFC Demo Board Features Designed to meet IEC1000-3-2 Worldwide Line Operation 85 Vrms to 265 Vrms Regulated 385 Vdc, 300-W max output Switching frequency 130 khz Specifications Input Voltage
Monolithic Amplifier CMA-545G1+ Low Noise, High IP to 2.2 GHz. The Big Deal
Low Noise, High IP3 Monolithic Amplifier 50Ω The Big Deal 0.4 to 2.2 GHz Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high High Gain, 31.5 db Low Noise Figure, 1.0 db High IP3, 35-37
+Denotes lead-free and RoHS compliant.
19-2446; Rev 1; 6/08 MAX17062 Evaluation Kit General Description The MAX17062 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages required for active-matrix,
MMA043AA Datasheet 0.5 GHz 12 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier
MMA043AA Datasheet 0.5 GHz 12 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
GRF2541. Preliminary High Gain, Ultra-LNA w/bypass ac: GHz. Product Description. Features. Applications
Product Description GRF2541 is an ultra-low noise amplifier (LNA) with bypass designed for IEEE 802.11a/n/ac/p applications in the 5GHz band (5.1 GHz to 5.925 GHz). The device exhibits outstanding de-embedded
GRF4002. Broadband LNA/Linear Driver GHz. Features. Applications. Preliminary. Product Description
Broadband LNA/Linear Driver 0.1-3.8 GHz Package: 1.5 x 1.5 mm DFN-6 Product Description Features 0.1 GHz to 3.8 GHz (Single Match) NF: 0.75 db @ 2.5 GHz Gain: 15.0 db @ 2.5 GHz OIP3: +37.0 dbm @ 2.5 GHz
Wide Band Drive Amp BT09E. Application Note (Tune for OIP3)
1. RF MMIC Innovator www.berex.com [Classification] Application Note [Date] 2015.07 [Revision No.] Rev.A [Measuring Instruments] - NA_Agilent 8753ES - SA_Agilent E4440A - SG_Agilent 4438C - SG_IFR 3416
Part Name Code Description Qty
Component list APF073A_APF074A - MIZAR Part Name Code Description Qty 02035 BNC CONNECTOR FOR RG316 CABLE 1 02513 90 SMB SOCKET cod. R114186000W 2 (APF073A) 1 (APF074A) 02518 SMB SOCKET FOR RG174 CABLE
MC13853 Tri-Band Low Noise Amplifiers with Bypass Switches Device
Freescale Semiconductor Technical Data Document Number: MC18 Rev. 1.8, 8/2008 MC18 MC18 Tri-Band Low Noise Amplifiers with Switches Device Package Information Plastic Package (QFN) Ordering Information
GRF3044. Preliminary. Broadband Gain Block 100 MHz to 12.0 GHz. Product Description. Features. Applications
Product Description is a broadband low noise gain block designed for applications up to 11.0 GHz, exhibiting a typical low noise figure (NF) of 1.8 db along with high gain. Features Reference: 4.0 GHz;
GRF2083. Preliminary. Ultra-LNA with Shutdown Tuning Range: 3.0 to 6.0 GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/70 ma/3.6 GHz Gain: 17.8 db Eval Board NF: 0.65 db OP1dB: 19.5 dbm OIP3: 36.5 dbm High Isolation Shut Down State Flexible Bias Voltage is a broadband, linear,
Evaluation board Manual
Evaluation board Manual 15W non-isolation Bulb AC100V MB39C602-EVBSK-02-EX Rev 1.0 Feb. 2013 1. General Description MB39C602-EVBSK-02-EX can light the LED, when the LED load is connected with the output
IS31LT3918 T8 Lighting Evaluation Board Guide
Description Quick Start The IS31LT3918 LED driver IC is a peak current detection buck converter which operates in constant off time mode. It operates over a very wide input voltage supply range of 6VDC
Test Fixture Mainframe Up to DC 40 GHz Connector Options:
Adjustable Mainframe Test Fixture Test Fixture Mainframe Up to DC 40 GHz Connector Options: APC-7, APC-3.5, Super-SMA, SMA, K, 2.4 mm Interchangeable Transitions RF-in / RF-out offset adjustable Extended
Maxim Integrated Products 1
19-2881; Rev 0; 6/03 General Description The MAX1543 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that provides the voltages and features required for active-matrix,
MAX2009/MAX2010 Evaluation Kits
19-2972; Rev 0; 9/03 MAX2009/MAX2010 Evaluation Kits General Description The MAX2009/MAX2010 evaluation kits (EV kits) simplify the evaluation of the MAX2009 and MAX2010. These kits are fully assembled
UM User manual for the BGU MHz LNA evaluation board. Document information
User manual for the BGU7003 868MHz LNA evaluation board Rev.1.0 06 December 2011 User manual Document information Info Content Keywords 868MHz LNA, BGU7003. Application Board ordering info: Abstract This
GRF2051. Ultra-Low Noise Amplifier; Tuning Range: GHz. Features. Applications. Preliminary. Product Description. Functional Block Diagram Ven
Ultra-Low Noise Amplifier; Tuning Range: 0.7 3.8 GHz Package: 2.0 x 2.0 mm QFN-12 Product Description Features Reference Condition: 1.9 GHz, 5.0 V and 70 ma Gain: 19.2 db Eval Board NF: 0.37 db De-embedded
Typical Performance 1. IS-95C ACPR dbm WCDMA ACLR dbm
Device Features OIP3 = 49.0 dbm @ 1900 MHz Gain = 12.5 db @ 1900 MHz Output P1 db = 30.3 dbm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOIC-8 package
Monolithic Amplifier CMA-252LN+ Ultra Low Noise, High IP to 2.5 GHz. The Big Deal
Ultra Low, High IP3 Monolithic Amplifier 50Ω The Big Deal 1.5 to 2.5 GHz Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high Ultra Low High Gain, High IP3 Class 1B HBM ESD (500V) CASE
THE DESIGNER'S GUIDE TO VERILOG-AMS First Edition June 2004
THE DESIGNER'S GUIDE TO VERILOG-AMS First Edition June 2004 KENNETH S. KUNDERT Cadence Design Systems OLAF ZINKE Cadence Design Systems k4 Kluwer Academic Publishers Boston/Dordrecht/London Chapter 1 Introduction
GRF3014. Preliminary. Broadband Gain Block Near DC to 9.0 GHz. Product Description. Features. Applications
Product Description is a broadband gain block designed for applications up to 9.0 GHz exhibiting flat gain over the band. Features Reference: 5.0V/45mA/5.0 GHz Gain: 10.0 db OP1dB: 12.4 dbm OIP3: 26.0
GRF2870 Guerrilla Bloc Ultra-LNA GHz
Product Description is a fully integrated amplifier offering industry leading ultra-low noise and high linearity over 0.6 to 1.0 GHz with no external matching or bias de-coupling required. Features Reference:
Sonnet is based in Syracuse, NY, USA with representatives across the globe.
At Sonnet, we've been developing 3D planar high frequency EM software since 1983, and our software has earned a solid reputation as the world's most accurate commercial planar EM analysis package for single
SA CHANNEL SEGMENT DRIVER FOR DOT MATRIX LCD
80 CHANNEL SEGENT DVE FO DOT ATX LCD Technical Specification Hong Kong Office oom C, 19/F, itz Plaza, 122 Austin oad, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (852) 2622 2055 Fax: (852) 2622 2117 China Tel:
MMA044AA Datasheet 6 GHz 18 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier
MMA044AA Datasheet 6 GHz 18 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
GRF6011. Preliminary. SPDT Failsafe Switch GHz. Product Description. Features. Applications
Product Description Features Path: RFC to RF1: (1.9 GHz); Vdd: 3.3V Insertion Loss: 0.43 db IP1dB: 32.0 dbm IIP3: 49.5 dbm is linear, ultra-low loss SPDT switch that has been designed with failsafe characteristics
PI354X-00 Evaluation Board User Guide 36 V to 60 V IN, 2.5, 3.3, 5.0, and 12 V OUT Cool-Power Buck Regulator & LED Driver
USER GUIDE UG: PIX- Evaluation Board User Guide V to V IN,.,.,., and V OUT Cool-Power Buck Regulator & LED Driver Contents Page Evaluation Board Supply & Load Connections PI--EVAL PI--EVAL PI--EVAL PI--EVAL
= 25 C) of Demonstration Amplifier. Parameter 500 MHz 1.0 GHz 1.5 GHz 2.0 GHz 2.5 GHz Units. Small Signal Gain
Rev 5.0 May 2015 CGH40090PP 90 W, RF Power GaN HEMT Cree s CGH40090PP is an unmatched, gallium nitride (GaN) high electron mobility transistor (HEMT). The CGH40090PP, operating from a 28 volt rail, offers
USER GUIDE FOR IRDC3823 EVALUATION BOARD
IRDC3823-PV2 SupIRBuck TM DESCRIPTION USER GUIDE FOR IRDC3823 EVALUATION BOARD.2Vout The IR3823 is a synchronous buck converter, providing a compact, high performance and flexible solution in a small 3.5mm
AL8808EV2 EVALUATION BOARD USER GUIDE
EVALUATION BOARD USER GUIDE DESCRIPTION The AL8808EV2 is an evaluation board showing the application of the Diodes Incorporated AL8808 LED driver device on a board suitable for use in an MR16 LED lamp.
Using Cadence Virtuoso, a UNIX based OrCAD PSpice like program, Remotely on a Windows Machine
Using Cadence Virtuoso, a UNIX based OrCAD PSpice like program, Remotely on a Windows Machine A. Launch PuTTY. 1. Load the Saved Session that has Enable X11 forwarding and the Host Name is cvl.ece.vt.edu.
EV0055. Monolithic Power Systems. MP1530: Triple Output TFT Bias Converter. General Description. Absolute Maximum Ratings
General Description The Evaluation Board is designed to demonstrate the capabilities of MPS MP50 triple output step-up converter which is capable of powering a TFT panel from a regulated.v or 5V. The MP50
BOM of TIDA for Intel Atom C2000 SoC for VNN rail. Date: Jan 12, 2015 Engineer: Narendra Kumar
BOM of TIDA-00507 for Intel Atom C2000 SoC for VNN rail. Date: Jan 12, 2015 Engineer: Narendra Kumar Item Qty Reference Value Description Size Part_Number Manufacturer Notes Populate C1 10uF Capacitor,
S +10.8V to +13.2V Supply Voltage S Output Voltages
19-5088; Rev 0; 12/09 General Description The MAX17113 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages and features required for thin-film transistor
1 NAT_LP2980IM5-3.0 smd_sot Analog, 3.0V 50mA, National 2 TEX_TPS767D318PWP TPS767D318PWP 1 Analog, 3V3_1V8, Texas
AIS Transponder Rx BOM 31047-3 rev.4 2002-06-20 POS Partno. Geom Qty Description 1 NAT_LP2980IM5-3.0 smd_sot23-5 1 Analog, 3.0V 50mA, National 2 TEX_TPS767D318PWP TPS767D318PWP 1 Analog, 3V3_1V8, Texas
Tutorial on getting started in Cadence. Advanced Analog Circuits Spring 2015 Instructor: Prof. Harish Krishnaswamy TA: Jahnavi Sharma
Tutorial on getting started in Cadence Advanced Analog Circuits Spring 2015 Instructor: Prof. Harish Krishnaswamy TA: Jahnavi Sharma Getting Started Start Cadence from the terminal by using the command
GRF2505. Linear PA Driver/Ultra-low Noise Amplifier; GHz. Features. Applications. Preliminary. Product Description. Functional Block Diagram
Linear PA Driver/Ultra-low Noise Amplifier; 4.0-6.0 GHz Package: 6-Pin DFN Product Description Features Broadband: 4.0 GHz to 6.0 GHz 0.80 db Noise Figure at 5.5 GHz 13.2 db gain, +33 dbm OIP3 and +20.5
GRF4042. Low Noise Amplifier with Bypass & Guerrilla Armor ; GHz. Features. Applications. Preliminary. Product Description
Preliminary Low Noise Amplifier with Bypass & Guerrilla Armor ; 0.4 2.7 GHz Package: 2.0 x 2.0 mm QFN-12 Product Description Features 0.7 GHz to 2.7 GHz (Single Tune) Bypass + Guerrilla Armor NF: 0.85
Application Suggestions for X2Y Technology
Application Suggestions for X2Y Technology The following slides show applications that would benefit from balanced, low inductance X2Y devices. X2Y devices can offer a significant performance improvement
For QualNet 5.X the system is different. In the case for floating license we only require 1 license file:
License Queries 1. Do I need separate client and server License File? With the new version of QualNet 5.X, NCS updated the licensing mechanism. This means that the old QualNet 4.X license will not work
Evaluates: EV Kits Requiring SPI/ Parallel to USB Interface. INTF3000 Interface Board. General Description. Quick Start. Benefits and Features
INTF3000 Interface Board Evaluates: EV Kits Requiring SPI/ Parallel to USB Interface General Description The INTF3000 interface board is designed to facilitate the interfacing of Maxim s evaluation kit
LM48555 Evaluation Board
LM48555 Evaluation Board Quick Start Guide 1) Apply power supply voltage to positive terminal of JU4, and source ground to the negative terminal. 2) Short the terminals of JU1 to release the device from
MAX3872/MAX3874 Evaluation Kits
9-2767; Rev 0, 2/03 MAX3872/MAX3874 Evaluation Kits General Description The MAX3872/MAX3874 evaluation kits (EV kits) simplify evaluation of the MAX3872 and MAX3874 clock and data recovery with limiting
By Joe Grimm, Business Development Manager, RFIC Switches, California Eastern Laboratories
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 988-3500 Facsimile: (408) 988-0279 CMOS RFIC Switches: Simple and inexpensive, the latest 2.5GHz versions pose a legitimate challenge
IS31LT3935 Bulb Lighting Evaluation Board Guide. Description. Features. Applications. Quick Start. Ordering Information. or call
Description The Flicker-Free TM IS31LT3935 is a single stage current mode LED driver optimized for high power factor and compatibility with all TRIAC dimmers. The PFC architecture enables excellent power
Limiters Detectors Switches, Switch Matrices Attenuators Phase Shifters Directional Couplers Power Dividers Integrated Assemblies.
Limiters Detectors Switches, Switch Matrices Attenuators Phase Shifters Directional Couplers Power Dividers Integrated Assemblies RF / Microwave Components & Subsystems 2011 Table of Contents Limiters
digilo A Wideband PLL Synthesizer
digilo A Wideband PLL Synthesizer The digilo is a Wideband Fractional-N / Integer-N PLL Synthesizer based on Maxim's MAX2870 capable of generating signals from 23.5MHz to 6GHz. It measures only 2 x 3 and
Typical Performance 1. WCDMA 4FA_ACLR dbm LTE20M ACLR dbm
Device Features OIP3 = 48.5dBm @ 700 MHz Gain = 22.0 db @ 700 MHz Output P1 db = 33dBm @ 700 MHz 50 Ω Cascadable Highly Reliable InGaP/GaAs HBT Technology Lead-free/RoHS-compliant 24L QFN 4X4 SMT package
Low Current, High Performance NPN Silicon Bipolar Transistor. Technical Data AT AT-32033
Low Current, High Performance NPN Silicon Bipolar Transistor Technical Data AT-311 AT-333 Features High Performance Bipolar Transistor Optimized for Low Current, Low Voltage Operation 9 MHz Performance:
Maxim Integrated Products 1
9-366; Rev ; 2/06 General Description The MAX8727 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a pulse-width-modulated (PWM) step-up DC-DC converter.
EVAL6494L. Demonstration board for L6494L gate driver. Description. Features
Demonstration board for L6494L gate driver Description Data brief Features Driver current capability: 2 A source, 2.5 A sink Integrated bootstrap diode Single input and shutdown pin Adjustable deadtime
Typical Performance 1. Absolute Maximum Ratings
Device Features +5V/355mA at operating bias condition Gain = 27.0 db @ 1.9 GHz P1dB = 32.5 dbm @ 1.9GHz LTE 20M ACLR = 22dBm Output Power at -50dBc @ 1.9GHz Intergrated interstage matching Lead-free/Green/RoHS-compliant
DVK90130 MLX90130 Development kit
Features and Benefits Conforms with ISO/IEC 14443 A 1 and B 2, Conforms with ISO/IEC 15693 Conforms with ISO/IEC 18000-3 mode 1 Standard SPI interface with 256 Bytes Buffer High speed communication (848kbit/s)
FEB User s Guide FPP06R001 Evaluation Board
FEB29- User s Guide FPP6R Evaluation Board Featured Fairchild Product: FPP6R /FEBsupport 28 Fairchild Semiconductor Corporation FEBxxx_ FPP6R Rev... Table of Contents. Introduction... 2. Features.... Description...
Windows Installation January 2007
Windows Installation January 2007 Notice The information contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard to this material,
Evaluation Board LX1752 EVALUATION BOARD USER GUIDE
LX1752 Dual Interleaving PWM Controller Evaluation Board TM Page 1 CONTENTS INTRODUCTION TO PRODUCT... 3 FEATURES:... 3 OPERATION... 3 TEST POINTS... 4 INPUT AND OUTPUT CONNECTION POINTS... 4 LX1752 EVALUATION
MAX3983 SMA Connector Evaluation Kit
19-3340; Rev 0, 7/04 MAX3983 SMA Connector Evaluation Kit General Description The MAX3983 SMA Connector evaluation kit (EV Kit) is an assembled demonstration board that provides electrical evaluation of
Schottky Surface Mount Limiting Diode Driver RoHS Compliant
GC9952-6LP Datasheet Schottky Surface Mount Limiting Diode Driver RoHS Compliant Preliminary December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
RF ESD Protection Strategies The Design and Performance Trade-off Challenges
RF ESD Protection Strategies The Design and Performance Trade-off Challenges Ph.Jansen, S.Thijs, D.Linten, M.I.Natarajan V.Vassilev, M.Liu, D.Trémouilles, S.Decoutere, G.Groeseneken T.Nakaie, M.Sawada,
IRDC3810. Rev /14/2008 1
IRDC380 03/4/2008 SupIRBuck TM DESCRIPTION USER GUIDE FOR IR380 EVALUATION BOARD IRDC380 The IR380 is a synchronous buck converter, providing a compact, high performance and flexible solution in a small
Enables prolonged battery life. Saves DC power consumption when it is not reguired.
Ultra Low Noise, Low Current, Shutdown Monolithic Amplifier 50Ω 10 to 13 GHz The Big Deal Ultra-low noise figure, 1.3 db Low Current, 13 ma at 3V and 29mA at 5V Excellent ESD protection, Class 1C Small
O N C A D E N C E V I R T U O S O. CHEN, Jason Application Engineer, Keysight Technologies
O N C A D E N C E V I R T U O S O CHEN, Jason 2018.05.08 Application Engineer, Keysight Technologies Introduction to Momentum Momentum Features for RFIC Design Circuit/EM Cosimulation Flow on Cadence Virtuoso
2731GN-120V Datasheet Class-AB GaN-on-SiC HEMT Transistor
2731GN-120V Datasheet Class-AB GaN-on-SiC HEMT Transistor Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100
XR76117/21. PowerBlox 15A and 20A Synchronous Step Down COT Regulator GENERAL DESCRIPTION EVALUATION BOARD MANUAL FEATURES
XR76117/21 November 2016 GENERAL DESCRIPTION The XR76117 and XR76121 are synchronous step-down regulators combining the controller, drivers, bootstrap diode and MOSFETs in a single package for point-of-load
Gallium Arsenide PHEMT RF Power Field Effect Transistor
Technical Data Available at http://www.freescale.com/rf, Go to Tools Rev., 6/2005 Reference Design Library Gallium Arsenide PHEMT Power Field Effect Transistor Device Characteristics (From Device Data
GRF dbm Power-LNA GHz. Features. Applications. Preliminary. Product Description. Functional Block Diagram
+28.5 dbm Power-LNA 0.01 6.0 GHz Package: 3.0 x 3.0 mm QFN-16 Product Description Features 1.7 to 3.8 GHz (Single match) Gain: 17.5 db at 2.5 GHz NF: 0.70 db at 2.5 GHz OP1dB: +28.5 dbm at Vdd: 8.0 volts
ANALOG MODELING WITH VERILOG-A USING CADENCE TOOLS. Eng. Sherief Fathi
ANALOG MODELING WITH VERILOG-A USING CADENCE TOOLS Eng. Sherief Fathi Hardware Description Language (HDL) In electronics, a hardware description language (HDL) is a specialized computer language used to
Wireless Smart Charging System for Mobile Devices
Western Washington University Wireless Smart Charging System for Mobile Devices EE 492 Jacie Unpingco 5 June 2016 TABLE OF CONTENTS 1. Design Change Form...1 2. Schematic Sheets a. MCU, Battery, and LEDs
CS3448 BOM.TXT Bill Of Materials for CS3000/4000/4080.HZ Schematic on Jun 19, 2005
CS3448 BOM.TXT Bill Of Materials for CS3000/4000/4080.HZ Schematic on Jun 19, 2005 --------------------------------------------------------------------------------------------------------------------------------------------------------------------
GHz GaAs MMIC Distributed Amplifier
.5. GHz GaAs MMIC July 8 Rev Jul8 Features Ultra Wide Band Driver Amplifier Fiber Optic Modulator Driver 17. Small Signal Gain 5. Noise Figure 3 Gain Control +15. m P1 Compression Point 1% OnWafer RF,
NCP107X, 12 Vout, Off-line Buck Regulator
Design Note DN05058/D NCP107X, 12 Vout, Off-line Buck Regulator Device Application Input Voltage Output Power Topology I/O Isolation NCP1071 NCP1075 NCP1077 Smart Meters Electric Meters, White Goods 85
Control Devices Surface Mount Input-Limiting Diode Element
GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
LM3410X LED Driver 6-Pin LLP Demo Board
LM3410X LED Driver 6-Pin LLP Demo Board Introduction The demo board included in this shipment converts 2.7V to 5.5V input, and illuminates four 50mA LED s in series using the LM3410X 1.6MHz LED driver
EE431/531 Microwave Circuit Design I: Lab 2
1. Introduction EE431/531 Microwave Circuit Design I: Lab 2 This lab concentrates on the principles of designing impedance matching networks using Smith charts and CAD tools. You will implement both ell