SUPER LINE J SERIES THREE PHASE INDUCTION MOTOR
|
|
|
- Ilene Williamson
- 6 years ago
- Views:
Transcription
1 P I J I P IIO OO
2 P I J I P IIO OO eature and enefits ompact ize and ight eight ize and weight reductions have been achieved by the use of steelplate frame and aluminium brackets in the smallcapacity motors. ighly eliable Insulation ystems lass and insulation systems are characterized by superior resistance to heat, humidity and chemicals for topnotch reliability. ull ineup e have produced variety types of motors, ranged from / P to 0 P, thus providing a full lineup of motors ideal for any application. uperlative haracteristics and igh eliability ased on experience and technology accumulated over many years, along with an exacting qualitycontrol system, each motor is ensured to exhibit only the finest characteristics. afety: ll the rotating parts and the live areas are made sure that it cannot be accidentally touched directly. mooth cceleration: he low moment of inertia of the rotor combined with the motor s high acceleration torque, contributes to smooth starting and stopping. ow oise and Vibration evels: his feature has been achieved due to our highly individualized electrical design, the ample rigidity and the precise machining of the motor frames and brackets, and the exact balancing of the rotor. ignificance of type designations and degrees of protection for three phase motor J V aterial lank = ast Iron = teel nclosure = ripproof = otally nclosed anooled = otally nclosed uper ine J eries ounting onfiguration lank = oot ounting V = Vertical ype = lange ype International Protection tandard egrees of Protection I P I P ater Protection = Protection against obliquely falling water droplets (dripproof) = Protection against splashing (splashproof) = Protection against water jets (hoseproof) olid ody Protection = Protection against mediumsize foreign bodies = Protection against granular foreign bodies = Protection against dust deposits
3 P I J I P IIO OO otor ection ilent resin cooling fan with efficient cooling capability ( r or less). ubber gasket will help preventing water from entering into terminal box.** asy wiring through terminal block connection with lead wires (IP: ~r, IP 0 ~ r) lue seal between frame and bracket at both sides help preventing water from entering motor.** teel frame ( ~ r) and fins (0 ~ r) based on precision and welding technology. igh efficiency design focused on high acceleration torque and rotor of rather small moment of inertia enables smooth starting and stopping. rease at both bearing housings will trap dust that gets into motor.** ringer will shake off water to prevent water from entering motor.** able gland has an internal P screw to securely connect to wire hose from power source and prevent water from entering.** emarks: ** vailable in IP model only. onnection old press formed strong support made of thick steel strip (r or less) nd cover will prevent high impact water and protect rubber seal.** Internal honeycomb structure forms light and rigid bracket made of aluminium die casting (0 ~ r) onstruction of ead ires onnection iagram * erminal lock V V ead ire ead ire IP : 0 ~ IP : 0 ~ V V * can be used only with motors P and above.
4 P I J I P IIO OO tandard pecifications Item pecifications Voltage and requency : P and below = /~V 0z, /0V 0z : P and above = ~V 0z, ~0V 0z(uitable for starting) nclosure onstruction and egrees of Protection egrees of Protection IP nclosure onstruction otally nclosed anooled ype ~ 0 ~ 0 0 ~ orizontal J J J ame Vertical JV JV lange* J J IP ripproof 0 ~ J JV * tandard verticaltype motor can be used for indoor flange type. aterial Power ransmission ystem irection of otation ~ teel Plate 0 ~ ast Iron irectcoupled, pecial purpose system for pole machines with an output of P or above. irectcoupled and beltdriven, dualpurpose system for machines with or more poles. ounterlockwise () viewed from shaftend side. hermal lass mbient emperature IP : and below 0 and above IP : ll models ~ +0 lass lass lass ircumstance ondition mbient umidity ltitude nvironment % or less (for ripproof tructure) % or less (for otally nclosed tructure) ess than,000m above sea level o bursting / erosive gas or vapor egrees of Protection of leads onnection ype onnection ype IP ~ 0 ~ erminal lock ead ire (also suitable for starting) IP 0 ~ 0 ~ ead ire erminal lock oating olour unsell. (ray) onformed tandard I 00 & JI (for orizontal ype), J0 (for Vertical ype)
5 I P I J I P IIO OO J 0~ OIZO YP ripproof ype, IP egrees of Protection K K K ig. ection Z X liding distance foot as J P P 0 K K K K K K ig. K X ection J Z X liding distance foot as ig. K X ection J Z X liding distance foot as imensions (mm) J 0 0 P (k) otor erminal ox ig. * I J K X X Z K K (0.) (0.) (.), (.) (.) (.) (.) (.).(.), (.).(.) (.) /(0.) (0.).. 0. (.) (.) (.).(.) * he perpendicular variation of tolerance for the shaft center is 0 0. haft nd K earing rive nd Opposite pproximate eight (kg) pproximate Packing imensions (xx) Packing eight (kg) 0 0 j. ZZ ZZ x 0 x j ZZ ZZ, x x, J j j ZZ ZZ ZZ ZZ 0 x x 0 x x. 0 k ZZ ZZ, 0 x 0 x, 0 k ZZ ZZ x 0 x
6 P I J I P IIO OO JV 0~ VI YP ripproof ype, IP egrees of Protection JV P P ripproof over Z K Z K K K ection ottom view of shaft end ig. ig. K K ection I I ottom view of shaft end imensions (mm) lange P (k) otor erminal ox ig. I * Z K K JV 0 0 (0.) (.), (.) (.).(.), (.) (0.) (.) (.) (.).(.) (.) /(0.) (0.) (.) (.) (.).(.)... j j 0 j 0 j j j () 0() (0) () () (0) * ( ) is dimension of vertical type without dripproof cover. lange haft nd K earing rive nd Opposite pproximate eight (kg) pproximate Packing imensions (xx) Packing eight (kg) j. ZZ ZZ x x j ZZ ZZ, x x, JV j j ZZ ZZ ZZ ZZ 0 x x x x 0 0 k ZZ ZZ, x x, 0 0 k ZZ ZZ 0 x x
7 J ~ OIZO YP otally nclosed an ooled ype, IP egrees of Protection K K K K X ~ ection KP K crew Z X liding distance foot as K X I P I J I P IIO OO J P P 0 ig. ig. ection K crew Z J foot as X liding distance J 0 0 * he perpendicular variation of tolerance for the shaft center is ** his dimension is for model which KP > only imensions (mm) P (k) otor erminal ox ig. * I J K X X Z K K KP** /(0.) /(0.) (0.) (.), (.) (.).(.), (.) /(0.) /(0.) (0.) (.) (.) (.).(.) (.) /(0.) /(0.) (0.) (.) (.) (.).(.) P/ P/ P/ P/ P/ P/ P P 0 haft nd K earing rive nd Opposite pproximate eight (kg) pproximate Packing imensions (xx) Packing eight (kg) h ZZ ZZ.. x x. 0 j ZZ ZZ.0..0 x x j. ZZ ZZ. x 0 x... J j j ZZ ZZ ZZ ZZ,.. x x x x 0.,. 0 0 j ZZ ZZ x x 0 0 k ZZ ZZ, 0 x x, 0 k ZZ ZZ x x
8 I P I J I P IIO OO J 0~ OIZO YP otally nclosed an ooled ype, IP egrees of Protection J P P K K K X ection K cr ew JK Z J foot as ig. ig. K X K crew JK Z ection J foot as KP J J P (k) otor erminal ox ig. * I J JK K X Z K K KP * he perpendicular variation of tolerance for the shaft center is 0 0. (), () (.) () 0() 0(), 0() () () () () ().. (.). (0) haft nd K () () (.), () 0() 0(), 0() () 0() 0().. ( ) is dimension for pole motors. (.) () () (.), () 0(), 0() 0() k k k m ( m) 0 m ( m) 0 m () (). () () () () 0 0 rive nd earing ZZ ZZ ZZ ZZ (ZZ) ZZ (ZZ) ZZ Opposite ZZ ZZ ZZ ZZ (ZZ) ZZ (ZZ) ZZ pproximate eight (kg),, ,, () () P P P / P /.. m m.. ZZ ZZ ZZ ZZ,, 0 pproximate Packing imensions (xx) x 0 x x 0 x x x x x x x x x x x x x,, imensions (mm) P / P / P / P / Packing eight (kg),, 00,, 00
9 P I J I P IIO OO JV ~ & JV 0~0 VI YP otally nclosed an ooled ype, IP egrees of Protection K crew Z K ection ottom view of shaft end K cr ew Z Z JV JV lange 0 0 JV P P ig. K ~ K crew ig K K ection P (k) otor erminal ox ig. I Z K /(0.) /(0.) (0.) (.), (.) (.).(.), (.) (), () (.) () 0() I /(0.) /(0.) (0.) (.) (.) (.).(.) (.) () () (.), () 0() I ottom view of shaft end /(0.) /(0.) (0.) (.) (.) (.).(.) (.) () () (.), (). ig. 0 0 j j j j 0 j 0 j j j j j 0 j 0 j K K ection I ottom view of shaft end I P/ P/ P/ P/ P/ P/ P P P / P / P / P / imensions (mm) 0 0 JV JV lange haft nd earing pproximate eight (kg) pproximate Packing Packing eight (kg) K rive nd Opposite imensions (xx) h j j j j j k k k k k m.. ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ..0.,,, , , x x 0 x x 0 x x x x x x 0 0 x 0 x x x x x x 0 x x 0 x x x x x...,.,,....,....,
10 P I J I P IIO OO hree Phase otor haracteristics J(V) IP ~ (hermal lass ), J(V) 0~ (hermal lass ) (/ ~V 0z, / 0V 0z) P k / /. / /. / / V 0z 0. /. /. /. /. /. /. / 0 /. /.0 /. / 0. /. / 0. / 0. / /. /. /. /.0 /. /. / / ull oad urrent() / ull oad evolution(r/min) V 0z 0. /.0 /. /. /. /. /. / 0. / 0. /. /. / 0. /.0 / 0. / 0. /. / 0. /. /. /.0 /. /. /. / V 0z 0. /.0 /. /. / 0. / 0. /. /. / 0. /. /. /. /. /. /. /. / 0. /. /. /.0 /. /. / / V 0z 0. /. /. / 0. /. /. /. /. / 0. /. / 00.0 / 00. /. /. /. / /. / 0. / 0. /. /.0 / 0. / / 0V 0z 0. / 0. /. /. /.0 /. / / 0. / 0. / 0.0 /. /. /. /. /. / 0. / 0 0. / 0. /.0 /. / 0. /. /. / (~V 0z, ~0V 0z) P k ull oad urrent() / ull oad evolution(r/min) V 0z. /. / 0. / 0. / / / / / / / /. / 0. /. /. / / / 0 / 0 / 0 /. / / 0 / / 0. /. /. / / / / / 0 / / / V 0z. /. /.0 /. / / / / / / 0. / /. /. /. /. / / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0. / /. / / / / / / / / V 0z. /. /. / / / / / / / / /. /. /.0 /. /. / 0 / 0 / 0 / 0 / 0 / 0 / 0 / /. /. / / / / / / / / / 0V 0z. / / 0. /. / / / / / 0 / / /. /. / 0. / 0 / 0 / 0 / 0 / 0 / 0 0 / 0 / 0 / 0 / 0 /. /. /. / / / / / / / / J(V) IP 0~(hermal lass ), 0~ (hermal lass ) (/ ~V 0z, / 0V 0z) (~V 0z, ~0V 0z) P. k V 0z. / 0. /. / 0. / 0. /. / ull oad urrent() / ull oad evolution(r/min) V 0z.0 / 0. /.0 / 0. / 0. /. / V 0z. /.0 / 0. /. /. /. / V 0z. / 00. /. /. /. /. / 0V 0z. /. / 0. /. /. /. / 0 P k.... ull oad urrent() / ull oad evolution(r/min) V 0z. / 0. /. / V 0z V 0z 0V 0z. /. /. /. /. /. /. /. /. / 0
11 hree Phase otor haracteristics (/ ~V 0z, / 0V 0z) J(V) IP ~ (hermal lass ), J(V) 0~ (hermal lass ) P k V 0z ull oad urrent() / ull oad evolution(r/min) V 0z V 0z V 0z 0V 0z / / 0. / 0. / 0. / 0. / / 0.. /.0 /.0 /. / 0. / /. /. /. / 0. /... /. /. /. /. / 0. / 0. /. /. /.0 /.. /. /. /. /. /... / 0. / 0. /. / / 0. /. /. /. /. / / 0.. / 0. / 0. / 0. / 0. / 0 / 0..0 /. /. /. / 00.0 / / 0. / 0. /.0 / 00. /.. 0. /. / 0. /.0 / 0. /. /. /. /. /. /.. / 0. / 0. /. /. /... /. /. /. /. / 0. /. /. / /. / 0 / 0.. / 0. / 0. /. / 0 0. / 0 / /. /. /. / 0. / 0.. /. /. /. /.0 /. 0.0 /.0 /.0 /. /. / 0.. /. /. /.0 / 0. /.. /. /. /. /. /.. /. / / /. / J(V) IP 0~(hermal lass ), 0~ (hermal lass ) P k V 0z ull oad urrent() / ull oad evolution(r/min) V 0z V 0z V 0z 0V 0z / 0.0 / 0. /. / 00. /.. /. /.0 / 0. /. / / 0. / 0.0 / 0. / 0. /. /. /. /. /. /... /. /. /. /. /.. /. /. /. /. / 0
12 hree Phase otor haracteristics (~V 0z, ~0V 0z) J(V) IP ~ (hermal lass ), J(V) 0~ (hermal lass ), J IP ~ P (hermal lass ) P k V 0z ull oad urrent() / ull oad evolution(r/min) V 0z V 0z 0V 0z.. /. /. /. /... / 0. /. / / 0.. / 0.0 /. /. / 0. /. / /. / 0 / / / /. 0 / / / / 0 / / / / 0 0 / / / / 0 0 / / / 0 / 0 0 / 0. / / / / / / /.. / 0. /. /. /... /. /. /. / 0.. /. /.0 /. / 0 0. /. /. / / 0 0 / / 0. / 0 / 0. 0 / 0 / 0 / 0 / 0 0 / 0 / 0 / 0 / / 0 / 0 / 0 / / / 0 / 0 0 / / / 0 / 0 / 0 / 0 / 0 / 0 / 0 0 / 0 / 0 / 0 / 0 / 0 / 0 / / 0.. /. /. /. /... / /. /. /. 0. /. / /. / 0 / / / /. 0 0 / / / / / / / / 0 / / / / / / / / 0 0 / / / / 0 / / / / J(V) IP 0~(hermal lass ), 0~ (hermal lass ) P k V 0z ull oad urrent() / ull oad evolution(r/min) V 0z V 0z 0V 0z.... / 0. /. /. /. /. /. /. /.. /. /. /. / 0
ELCON Changeover Switches... Proven over decades LOAD. compact L.T. SWITCHGEARS
O hangeover witches... roven over decades 0 O new 0 & 2 in size I most compact 00 single handle changeover switch.. I .. I On oad hangeover witches O is the ioneer rand in hangeover witches in India. lcon
80 Series Push Button Pendant Features
80 Series Push utton Pendant Features he Conductix-Wampfler 80 Series Push utton Pendants are available with a wide variety of switch types, options, and accessories for easy customization. You can get
Dual rod cylinder with guide function for pick & place applications.
ual Rod ylinder Series XS ø, ø, ø, ø, ø, ø32 ual rod cylinder with guide function for pick & place applications. Series XS Twice the thrust on-rotating accuracy ±. X TS Y Y G X - - ata all bushing bearings
86 mm sq. (3.39 inch sq.)
mm sq. (.9 inch sq.). /step RoH Bipolar winding, Bipolar winding, CE/UL model Bipolar winding, Terminal block type CE/UL model Unipolar winding, p. 7 Unipolar winding, CE/UL model p. 7 Customizing Hollow
ISO STAR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #1... ISO #3
ISO STR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #... ISO #3 Specially coated glandless spool and sleeve for long life vailable with integral flow regulators on ISO # & #2 sizes ow
MIL-DTL SERIES III PRODUCT CATALOG
--38 O O onnetors, n. a global leader in the engineering and manufaturing of highly reliable onnetors. roduts that by design been proven to exeed the diverse requirements of both ommerial and military
Series RT. Thermal overload relays. E culus. Thermal overload relays. for contactors from 0.16 to 850A. Standards. Approvals C.62.
for contactors from 0.16 to 850 ontrol circuit up to 690V Power circuit: - RT1, RT12: up to 690V - RT2, RT22, RT3, RT32, RT4/4L, RT5/5L & RT6/6L: up to 1000V Thermal protection against normal overloads.
80 Series Push Button Pendant Features
80 Series Push utton Pendant Features he Conductix-Wampfler 80 Series Push utton Pendants are available with a wide variety of switch types, options, and accessories for easy customization. You can get
Contents. Standards & Regulations. Conditions of Installations. Mechanical Design. Electrical Design. BR2 IE2 High Eff.
Contents Standards & Regulations Conditions of Installations Mechanical Design Electrical Design BR IE High Eff. Cast Iron Motor BR1 IE1 Eff. Cast Iron Motor BR Cast Iron Motor Dimensions BA IE1 Eff. Aluminium
Product Certification. Approvals/Certifications. Environmental. Foam-in-place polyurethane. Plastic Mounting Plate
ulletin eneral Purpose nclosures Specifications ulletin eneral Purpose nclosures Type R,, X,, and rainproof, watertight, corrosion resistant, and dusttight, IP protection Designed for use as automation
IN3000 Direct Inductive Safety Switches. Cost-effective position monitoring with direct evaluation
U 3000 irect nductive afety witches ost-effective position monitoring with direct evaluation 3000 irect on-contact safety switches 2 ost-effective position monitoring with direct evaluation dditional information
SMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS
SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel
PRESET HOUR METER. FEATURES 1. Preset function equipped in half size (24 48 mm inch). 2. Display has backlight for instant recognition.
PRESE HOUR MEER Hour Meter FEAURES 1. Preset function equipped in half size (24 48 mm.94 1.89 inch). 2. Display has backlight for instant recognition. ime counting iming up Red or (Green) (backlight) 3.
Fluid Cooling Shell & Tube UC / UCV Series
luid ooling Shell & Tube U / UV Series 0916 ST & STISS ST OSTUTIO erformance otes Steam & large temperature differentials U tube emovable tube bundle for servicing educes thermal expansion stresses 3/8"
High Voltage Induction Motors. 21-MII Series. New High Efficiency Design for High Capacity Applications Up to 3,550 kw (4,750 HP)
High Voltage Induction Motors -MII Series New High Efficiency Design for High Capacity Applications Up to,0 kw (,0 HP) MII Series: Combining over 00 years of experience with innovative new technology makes
Product description. At a glance. Your benefits
Reliable, established and modular Product description The TM60 absolute multiturn encoder with SS data interface by SK provides reliable positional and speed information, even in harsh environmental conditions
Clamp Body Type H. Smooth Inside Surface w/o Tension Clearance 6 106/06 QQQ 6,4 1/4 106,4/06,4 QQQ 8 5/16 108/08 QQQ 9,5 3/8 1/4 109,5/09,5 QQQ
Twin eries DIN 3015, Part 3 Components: Dimensions / Clamp ody Profiled Design Profiled Inside urface with Tension Clearance Clamp ody Type mooth Inside urface w/o Tension Clearance 1 2 ø D 1 ø D 2 Clamp
D3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch
The smallest detection switch in the industry with high precision operation. (OMRON's data as of pril 2008) (.0.5 0.9 mm (W H)) Ultra small size and ultra low profile contributing to down-sizing of sets
Frame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe
W Series 143T-447T - TEFC Heavy Duty Construction Frame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe Single Phase 56/56C : RF - Removable Feet TM - Thermistors
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Seal-less circulator with flanged connection. Two speed, manually adjustable to match
Quick Coupling Products
Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION
len-bradley 871TM-DH10NN30-D 2-22 Visit our website:
871TM 3Wire tainless teel Face/Threaded hort tainless teel arrel Features 871TM able tyle 12, 18, 30 mm 871TM Mini Quickisconnect tyle 12, 18, 30 mm 871TM Micro Quickisconnect tyle 12, 18, 30 mm 3wire
TECHNICAL DATA EA 90. FAN HOUSING The fan housing is moulded from high strength structural polymer, incorporating resilient mounts for the shaft.
N 90 N and RSRVOR he cabinet and water reservoir are constructed from injection moulded high strength structural polymer, incorporating UV inhibitor additives. ll cabinet and reservoir mouldings are slate
PH-M3x5. Contents. Page
Page 2... 3... 4... 5-6... 7-8... 9... 10... 11... 12-14... 15... ontents Index, Message, Introduction Product Overview Preparation for ssembly Installing the Motherboard Installing the PU ooler Installing
8 Submersible Motors Standard
Applications These motors are built for dependable operation in vertical 8 diameter or larger water wells. Basic Features Double Flanged NEMA mounting design Stainless steel splined shaft StatorShield
D3SH. List of Models. Surface Mount Switch S H SPST-NO SPST-NC. Long Lever Models. Standard Lever Models
D urface Mount witch The smallest detection switch in the world. Ideal for miniature mobile devices (OMRON's data as of eptember 2007) Ultra small size and ultra low profile contributing to down-sizing
CS3 ULTRA COMPACT EXTREMELY RUGGED JOYSTICK CONTROLLER
S3 ULT OMPT ETEMELY UGGE JOYSTIK ONTOLLE S3 S3H S3/ Hall-effect joystick Heavy duty Hall-effect joystick ang / bang onstruction: The S3 is an extremely rugged Joystick in an ultra-compact and versatile
Absolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
Absolute encoders multiturn
PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these
Fix-o-Rail. Distribution boards. Insulated enclosures Surface mounting. Fix-o-Rail 150. Features. Approvals / Marking. Standards.
Insulated enclosures Surface mounting ix-o-rail 50 With screwless earth bar IP40 Total safety istribution boards pprovals / Marking Standards N 60439-3 pplications ix-o-rail 50 is the best choice for power
Safety switches with manual mechanical delay and separate actuator
D Safety switches with manual mechanical delay and separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF VF KEYF VF KEYF7 VF KEYF ACTUATORS MECHANICAL DELAY C L L0 Short knob 0 sec. Short knob sec.
ECM3000. Control Motor
No. CP-SS-1816E ECM3000 Control Motor Overview The ECM3000 is a control motor designed for various industrial equipment applications. Two models are available: 90 angular stroke motor for applications
Pressure switches and thermostats, types KP and KPI
Features Wide regulating range Small dimensions Space-saving - easy to install in panels Ultra-short bounce time. Limits wear to an absolute minimum and increases reliability. Electrical connection at
Options. Options. Hyponic. Options. Hyponic. Options 4.1
4 4.1 lug-in olid Output haft Frame ize 1100 ~ 1300 B IA M IA M U IA B IA A K E N C ZA M IA 4X H IA K A E M B IA U IA M IA B IA B IA U IA U IA B IA T Model A B min B max E H K N M M 1120//TY-X1 3.54 2.046
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Circulating pumps with flanged connection > Applications: Drinking-water circulation
Pilot kick type 2 port solenoid valve : Normally closed,normally open GENERAL PURPOSE VALVE ADK11 ADK12 SERIES
K11 K1 Series Pilot kick type port solenoid valve : Normally closed,normally open NRL PURPS VLV K11 K1 SRIS iaphragm structure Port size : Rc1/, Rc3/, R1/, R3/, R1 JIS symbol K11(normally closed) UT K1(normally
TABLE OF CONTENTS. IEC and IEC Pin and Sleeve Devices. IEC and IEC Mechanical Interlocks. Manual Disconnect Switches
TABLE OF CONTENTS IEC-309-1 and IEC-309- Pin and Sleeve Devices Introduction... - Material Specifications... 6-7 North American Ratings (0 to 100 Amp)... 8-16 Accessories... 17-18 International Ratings
Asynchronous motors. 5/48 Permissible combinations of mechanical designs for 1PL6 motors,
Asynchronous motors 5 Asynchronous motors 5/2 Type overview and rated data 5/4 Technical definitions 5/4 Encoder systems 5/5 1PH7 motors 5/5 1PH7 motors, forced ventilation 5/32 Permissible combinations
Fluoropolymer Fittings Hyper Fitting / Flare Type
Fluoropolymer Fittings yper Fitting / Flare Series KK D S QR Flare type collet construction 00 compatible xcellent heat resistance ase of installation Triple-seal xcellent flow-through characteristics
CP Racks. Pinions. Table of Contents. Catalog Number of KHK Stock Gears. Pinions S SCP Pinions. Racks K RGCP 5-500
Table of ontents pecial haracteristics, oints of aution in electing and Using acks & inions... page 0 T Tapered inions. T Tapered acks... page 2. round pur ears... page 4 ()(D) round acks... page 4 pur
Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
Control Motor ECM3000
No. CP SS 1816E Control Motor ECM3000 The ECM3000 is a control motor designed for various industrial equipment applications. Two models are available: 90 angular stroke motor for applications such as burner
Flexible platform with many features of the Elite.
elect Cabinet & ack nclosures lexible platform with many features of the lite.» ully configurable for your specific applications.» umerous cooling options.» xtensive cable management.» tandard configurations
MAGNETIC ABSOLUTE MULTITURN
MAGNETI ABSOLUTE MULTITURN ompact Robust Standard Find on page F2 Find on page F15 Find on page F28 ompact, Magnetic Type RM-97/RM-98 Analog F2 Type RM-99/RM-100 SSI F7 Type RM-101/RM-102 ANopen F11 ompact,
TYPICAL SWITCH ORDERING EXAMPLE BARRIER TYPES. R No Barrier B With Barrier CAP COLORS. A Black B Ivory. Red. H Gray INSCRIPTION ORIENTATION
TYPICAL SWITC ORDERING EXAMPLE JW L R C A M L RATINGS TV5 Rated 0A @ 5/50V AC TV8 Rated 6A @ 5/50V AC ARRIER TYPES R No arrier With arrier OUSING COLORS A lack POLES SPST SPDT * DPST DPDT * DPST must have
AC Induction Servomotors
AC Induction Servomotors HDP Series, axis height H00, H, H60, H00 from to 70 kw Technical catalogue 607/0 Contents Digit 6 7 8 9 0 6 7 Type structure: C M 0 0 0 0 0 0 0 A 0 0 0 Type of motor IP HDP C Pos.
Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
60 mm sq. (2.36 inch sq.)
6 mm sq. (.6 inch sq.).8 /step RoHS Bipolar winding, Connector type Bipolar winding, Dimensions for attaching NEMA are interchangeable (7. mm-pitch) Unipolar winding, Connector type p. 7 Unipolar winding,
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
Rotary Ball Spline. With Support Bearing Type Models LTR and LTR-A
With Support Bearing Type Models LTR and LTR-A Outer ring Ball Flange outer ring Seal Seal Retainer Spline nut Spacer Retainer Spline shaft Fig.1 Structure of Model LTR Point of Selection Point of Design
SYSTEMS ELECTRONICS GROUP
SYSTEMS ELECTRONICS GROUP SYSTEMS M4500 MACHINE COMPONENTS RSV34-MS1 RESOLVER with MS CONNECTOR Brushless, Single-turn Resolver Rated to 3,000 RPM Rotary Position Transducer for M4500, M4020, M4040, M4041,
temperature rise for easy conversion to F1, F2, F3 washdown duty enclosure both brackets for increased
W Series 56/56C, 3 Phase - TEFC Cast Construction Single Phase : RF - Removable Feet EI Lightweight High Performance Cast Frames. Features Include: MG1-Part 31 inverter duty 15:1 constant torque, 20:1
SPOT WELDING GUNS MEDIUM & HEAVY DUTY kva
SPOT WL US U & VY UTY -7 kv SUSP SPOT WL US T. J. Snow stocks a variety of inventory and offers support services of all T portable and stationary resistance spot welding machinery. T s top of the line,
Chapter. Specifications. In this Chapter...
Specifications hapter In this hapter... vailable Models... - E-SML-RN and E-SML-R Specifications... - E-SML and E-TL Specifications... - E-TL, E-TL and E-TL Specifications... - E-SML-RN, E-SML-R, E-SML
Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
Open Type. Max. Hp 1-1/2 1-1/ SAO12b 219. SAG12b 240. Use Size 0. SBO2b 276. SBG2b 297. SBW12b /2 7-1/
ull ontactors Rated eneral nformation lass 8 / Refer to atalog 8T970 www.us.schneider-electric.com OR URRNT NORMTON lass 8 S magnetic contactors are used to switch heating loads, capacitors, transformers,
MOTOMAN-MPP and MPK Series
Handling Robot for Picking and Packing MOOMN-MPP and MPK eries 13 2 333 www.ragroup.com.au FERE NEW CONROER... DX2 : Patented multiple robot control (up to 8 robots/72 axes) Dynamic interference zones
Speed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
Syr-line TMR48D Digital Timer
yr-line MR48D Digital imer Front Panel 48x48 (1/16 DIN) Large LED or LCD creen (13.2 mm) Multi-function and single-function Basic & Advance configuration modes Multi-range (0.05 s 9999 h) Multi-voltage
Mounting and Technical Data
Technical Information Mounting and Technical Data / ontent This document describes the technical data, the assembly and selection of cables for the D main distribution and. SM_SM--TI-en-30 Version 3.0
STRUCTURE AND ADVANTAGES
The NB ball spline is a linear motion mechanism utilizing the rotational motion of ball elements. It can be used in a wide variety of applications including robotics and transport type equipment. STRUCTURE
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
NARROW PITCH (0.4mm) CONNECTORS P4 SERIES
Without soldering terminal With soldering terminal NARROW-PITH ONNTORS FOR BOARD-TO-BOARD AND BOARD-TO-FP ONNTION FATURS 1. 0.4 mm pitch and support for mated heights of up to 1.5 mm, 2.0 mm, 2.5 mm, 3.0
Designator. Forging SS 6L ASTM A182, ASME SA182
ace Seal ittings -42 ace Seal ittings Series O-ring ace Seal ittings eatures O-ring seal to provide perfect leak-tight service for working conditions from critical vacuum to high O-ring contained completely
Data Sheet for Panel Encoders
eries V6 With flatband cable V2 older pin s backside V5 older pin s frontside Very compact design, ideal for small installation spaces Choice of different operational torques for bearing Choice of different
Absolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
8 Submersible Motors Hi-Temp 75
Applications These motors are built for dependable operation in vertical 8 diameter or larger wells, in applications with higher temperature, higher thrust or low flow. Basic Features Able to operate in
Convenience Outlets and Receptacles. Quick Guide to Snap-In Outlets and Plugs
SETION K table of contents onvenience Outlets and Receptacles Snap-In onvenience Outlets 2-Pole, 3-ire rounding.................................. K2-K7 rounding Outlet with rounding Lead...............
Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
Safety switches with solenoid and separate actuator
Safety switches with and separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF2 VF KEYF3 VF KEYF7 VF KEYF8 CTUTORS HED TYPE ND WORKING PRINCIPLE 96D 96E 98D locked actuator with energized locked
Speed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
General Specifications
Series ND mm Process Sealed SMT DIP otaries eneral Specifications Electrical apacity (esistive Load) Switching ating: ma @ 5V D Nonswitching ating: ma @ 5V D Other atings ontact esistance: Insulation esistance:
TOP - 1. Instruction Manual. Version 1.0 Produced in Jan. 2004
Version 1.0 Produced in Jan. 2004 Instruction Manual LCD monitor IV-08MP Thank you for purchasing the SHARP IV-08MP LCD monitor. Read this introductory instruction manual carefully to thoroughly familiarize
SPV Series. Motorized Linear Slides. Features
The employs an stepping motor and controller system for tuning-free, misstep-free operation. The belt driven actuator allows the load to be transferred at high-speed and long strokes. Connection Information
L P Linn-Pumpen GmbH. Electric-gear-pumps series FKM
Electric-gear-pumps series FKM Construction Self-priming electric-gear-pumps, bellhousing with foot-flange, pump-casing in cast iron. Gear-pumps series FKM with motor-power up to 1,5. Suction- and -ports
Standard Product. Catalog Number. Width. Depth. mm 18 = = = = = = = = 400
Spec-01195 PROLINE G2 External Components Bases Gland Plate Gland plates are used with a plinth base to provide cable management solutions while maintaining a NEMA 12 rating. PROLINE G2 s unique Duro-Stand
Rotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
Bulletin 1494H Heavy Duty Safety Switches
ulletin H Heavy uty Safety isconnect Switches Product Overview/Product Selection Fusible and Non-Fusible Type ulletin H Heavy uty Safety Switches switch ratings Type, R, or enclosures V: -phase, -phase,
4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2
![4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2](/thumbs/76/73938132.jpg "4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2")
ulletin - Product Overview/Product Selection ulletin - Industrial Relay ontact cartridges convertible from.o. to.. and vice versa EM V coils Pneumatic timing unit Solid-state timing unit Overlap contacts
(513)
roduct atalog Hardscape olutions + (513) 260-4600 www.boarhogtools.com ontents Hardscape quipment: 2 Boar Hog - remium iamond ools 3 olmar - ower roducts 4 he Kracker - aver & Wall plitter 5 Weber mt -
Pilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC
D11/D1 Series (general purpose valve) D11/D1 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Refer to Ending 17 for more details. JIS symbol Common
IP Enclosures Product Overview 2015
IP Enclosures Product Overview 2015 ENGINEERING COMPUTER SERVICES LTD Wall Mounted Electrical Enclosure Systems IP Enclosures is a premium brand of high quality wall mounted electrical enclosures and accessories.
HARSH-ENVIRONMENT ARINC 801 Connectors and Termini
S-VIO I 801 onnectors and ermini O I-S I-O I-OI WOI OO 2014 SIS 180-159 ltra-ow d oss I 801 iber Optics with removable alignment sleeve for easy cleaning, maintenance and inspection he I 801 (Series 180-159)
Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
10 L2.39. Pipe / Tube Copper (2 Clamp Halves) ( mm /in) Ø D1 Pipe Tube (mm) (in) (in) (in) ( = Material) L1 L2 H S min. Width
DIN 3015, Part 1 Components: Dimensions / Order Codes Clamp ody ød1 ød1 10.39 TAUFF 1 TAUFF 1A to 8 Clamp ody One clamp body is consisting of two clamp halves. Colour: Green Material code: PP Colour: lack
Slim Ducted type. Contents MMD-AP 4SPH2UL MMD-AP0094SPH2UL MMD-AP0124SPH2UL MMD-AP0154SPH2UL MMD-AP0184SPH2UL
E5-3I D-AP 4SP2U Slim Ducted type D-AP0074SP2U D-AP0094SP2U D-AP024SP2U D-AP054SP2U D-AP084SP2U Contents. Specifications 2. Dimensions 3. Center of gravity 4. Piping diagram 5. Wiring diagram 6. Electrical
Voltage Current Front-mounting bracket
Switching Power Supply S8PS Compact DIN-Rail Mounting Industrial Power Supplies with Capacities Up to 600 W Models range from 0 W to 600 W. Universal input: voltage range 0 to 240 VAC. Power Factor Correction
Standard CANopen/CANopenLift. RoHS. High protection level. High shaft load capacity. Flexible
CANopen/CANopenift The Sendix multiturn encoders 868 and 888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a
Vonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body)
Vonk hoke Valve Model HV (ngle ody) Flow ontrol Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability
B-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDEROTARYBUSH STROKE BUSH SLIDE SHAFT
SLIDE GUIDE STROKE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT B-1 The NB ball spline is a linear motion mechanism utilizing the rotational motion of ball elements. It can be used in a wide variety of applications
onlinecomponents.com
YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
Narrow pitch connectors (0.4mm pitch)
For board-to-board For board-to-fp Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 3.96mm With soldering terminals FATURS 1. 0.4 mm pitch and support for mated heights
Chilled Water Computer Room Air Handler (CRAH) Critical Infrastructure for the World s Leading Data Centers
Chilled Water Computer Room Air Handler (CRAH) Critical Infrastructure for the World s Leading Data Centers DATA CENTER COOLING EXPERTISE Data Center managers have unique needs. Nortek Air Solutions listens
VCB22, 5/2 Solenoid actuated In-line spool valves
, / olenoid actuated nline spool valves >> ort size:, /... / ( ) >> ew design for industrial automation >> igh flow rate >> onnector with light as standard >> aintenancefree >> ubbase system for easy assembly
Betacom c 24 and 30kW Combination Boilers
Betacom c 24 and 30kW ombination Boilers Betacom c 24 30kW Betacom c - ombination Boilers The new Glow-worm Betacom c range of high efficiency combi boilers is simple, affordable and reliable. This stylishly
Absolute multiturn encoder TRK with EtherCAT - interface
Absolute multiturn encoder TRK with EtherCAT - interface Document no.: TRK 12825 HE Date: 07.02.2017 Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance
97 Series Standard Cylindrical Connector Amphenol
mphenol 97 eries tandard ylindrical onnector 12-022-17 www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. Table of ontents Page mphenol 97 eries tandard ylindrical