GOLIATH PARTS MANUAL Chief Automotive Technologies A DOVER COMPANY

Transcription

1 A DOVER COMPANY 00 Chief Automotive Technologies

2 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies warrants for one year from the date of installation and/or purchase any of its products which do not perform satisfactorily due to defect caused by faulty material or workmanship. Chief's obligation under this warranty is limited to the repair or replacement of products which are defective and which have not been misused, carelessly handled, or defaced by repairs made or attempted by others. CHIEF AUTOMOTIVE TECHNOLOGIES DOES NOT ASSUME RESPONSIBILITY FOR ANY DEATH, INJURY OR PROPERTY DAMAGE RESULTING FROM THE OPERATOR'S NEGLIGENCE OR MISUSE OF THIS PRODUCT OR ITS ATTACHMENTS. CHIEF MAKES NO WRITTEN, EXPRESS OR IMPLIED WARRANTY WHATSOEVER OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE REGARDING THE EQUIPMENT OR ANY PART OF THE PRODUCT OTHER THAN THE LIMITED ONE-YEAR WARRANTY STATED ABOVE.

3 ! PARTS INFORMATION To order replacement parts for the Chief, contact an authorized representative of Chief Automotive Technologies, 0-- The parts listed in the Parts Manual (Part No. 00) represent what Chief Automotive Technologies considers to be user installed. Other repairs should be deferred to an authorized representative. When contacting Chief Automotive Technologies by telephone or mail, provide the following information: name, name of business, business telephone number, and business address. Additional information needed when ordering: description of part(s) and part number(s). Also indicate the model for which the part is intended. NOTE: Chief reserves the right to alter product specifications and/or package components without notice. CAUTION: Always use Chief Automotive Technologies authorized replacement parts with the. When replacing any part make certain the part meets the original equipment requirements. Electrical Components All electrical cords and components must be replaced with Chief Automotive Technologies authorized replacement parts Hydraulic Hoses The two wire hoses furnished with this product meet the requirements of SAE 00R or SAE 00R, and have a working pressure of,000 psi. They should not be used with any other system having a higher than,000 psi output. All hydraulic components must be replaced with Chief Automotive Technologies authorized replacement parts.! Bolts/Fasteners All bolts and fasteners must be replaced with Chief Automotive Technologies authorized replacement parts and must not be less than Grade (Class.). Any bolt used in a pulling clamp that is frequently tightened must be Grade (Class 0.). All bolts lengths and diameters must be equal to those installed at the factory. Chain The / inch tower chains furnished with this product are a special alloy frame straightening chain designed exclusively for Chief Automotive Technologies to meet the rigid requirements of the collision repair industry. If replacement is required, purchase only the original Chief product from an authorized Chief Automotive Technologies representative. The auxiliary / inch chains available for this product are a special alloy frame straightening chain designed exclusively for Chief Automotive Technologies to meet the rigid requirements of the collision repair industry. If replacement is required, purchase only the Chief product from an authorized Chief Automotive Technologies representative. CAUTION: DO NOT use / inch chain on any towers Labels Replacement SAFETY and WARNING labels are available in several languages, and may be ordered by contacting an authorized Chief Automotive Technologies representative.

4 0

5 ITEM 0 P/N ' Parts List DESCRIPTION Assembly, Goliath 0 Series Assembly, Goliath 0 Series Assembly, Goliath 0 Series Assemblly, E/VHT " Auxiliary Cylinder (Optional) Assemblly, E/VHT " Auxiliary Cylinder (Optional) Assembly, Sure-Lock Assist Handle (Optional) Assembly, Wide Track Removable Crossmember (Optional) Weldment, Goliath Porta-Frame Weldment, Goliath Multi-Piece Top Deck Tape, Black Striping " Anti-Skid Tape, / x / Mainframe Label, Caution Protect Foot Label, Caution - Excelerator Wheel Stops Label, Caution Operation Label, Caution -Lift of Persons Prohibited Label, Caution -Egress/Ingress Label, Serial Number Weldment, Goliath Lift Leg Decal, Mainframe, Red TAPE SILVER, /" - ' DECAL, CHIEF AUTOMOTIVE LOGO Label, Patent Pending Weldment, Goliath Left Ramp Weldment, Goliath Right Ramp Assembly, Goliath 0-0 Ton Tower Assembly, Goliath Pump Cabinet

6 EXPLODED VIEW MAINFRAME / PORTA-FRAME 0 0

7 ITEM 0 0 P/N Parts List DESCRIPTION Weldment, Goliath Porta-Frame Bolt, M0 x. x 0 Hex Full Thread Weldment, Impulse VHT Unlock Bolt, /" x /" Shoulder - /- Thread Bolt, /" x /" Shoulder - /- Thread Formed Channel, Goliath Level Pad Washer, Flat -."IDx."ODxGA-plated Snap Ring, HD for /" shaft Pin, Goliath Tilt Bracket, Outside Porta-Frame Pneumatic Cylinder, /" bore x " stroke spring return Rod Eye, Impulse VHT Unlock Weldment, Goliath Lock Arm Assembly,." Bore x 0." Stroke Lift Ram Fitting, Pneumatic, / NPT to / Press-to-Lock 0 Retainer, E/VHT Lift Cylinder Bottom Screw, /-NC x.00" Socket Head Cap Pin, Goliath Lift Cylinder Top Pin, Goliath Lift Cylinder Bottom Weldment, Goliath Lift Leg Bolt, /- UNC x / Grade Plated Weldment, Goliath Porta-Frame Cover

8 V (REAR LIFT) V (FRONT LIFT) V (UNLOAD). GPM W/ FLOW ARROW TOWARDS MANIFOLD BLOCK 0. GPM W/ FLOW ARROW AWAY FROM MANIFOLD BLOCK ORIENTATION AND LOCATION OF FLOW CONTROLS IS CRITICAL. GPM W/ FLOW ARROW TOWARDS MANIFOLD BLOCK

9 ITEM 0 P/N Parts List DESCRIPTION Assembly, Goliath Porta-Frame Hydraulic Manifold Bulkhead Elbow - Goliath Porta-Frame Screw, /-0 x /" Button Head Torx Plus Straight Adapter, MB-MJ # O ring Boss Plug, Hex Head Adapter, - JIC to - ORB Flow Control,. GPM Pressure Compensated Flow Control,. GPM Pressure Compensated Hose, -FJX to -FJX x " Long x /" ID Plug, / NPT Straight Adapter, 00-- Hose, -FJX0M to -FJX0M x " Long x /" ID Bulkhead, Porta-Frame (Manifold Side) Fitting, Hyd #MBX - #MJ Coupler, Female Flat Face Fitting, Hyd #MB - #MB Hose, -FJX to -FJX0M " Long x /" ID Bracket, Porta-Frame Manifold

10 0-0 TON TOWER

11 ITEM P/N Parts List Weldment, 0-0 Ton Tower Pin, 0-0 Ton Tower Linkage Long Washer, /"id x / OD x.0" Thick Shim Snap Ring, HD for /" shaft Spacer, 0-0 Ton Tower Outrigger SCREW, /-NC X " SHCS Bolt, /-0 NC x /" Long Bar, Tower Linkage Driver Pin, 0-0 Ton Tower Linkage Short Pin, 0-0 Ton Tower Linkage Medium Spacer, Tower Force Clamp Shim, 0 Tower - ga. Screw, /- Socket Head Cap Assembly, Tower Outside Wheel Key, / x / x " Roller, Inside Tower Shim, 0-0 Ton Tower Outrigger.0" Screw, /-NC x.00" Socket Head Cap Shim, 0-0 Ton Tower Outrigger.0" Bolt, /-0 x Hex Washer, " OD x /" ID x.0" Thick Bolt, /" x " Shoulder - /- Thread Guard, Fuzion Tower, Outside Roller Label, Warning, Do Not Position Yourself Label, Warning, Force Clamp, Impulse Label, Caution, Pinch-Point, Impulse HOOK, 0 TOWER NUT, /-0NC LOCK JAM GR PL Weldment, 0-0 Ton Sure Lock Bar, 0-0 Ton Tower Float Linkage Tower Head, /" Chain 0-Ton Weldment, 0-0 Ton Sure Lock Release Washer, Thrust-."IDx."ODx.0" Portable Gauge Assembly, Front S LABEL, CAUTION CROSSMEMBER POSITION Chain, Tower, w/hook, /" x ' Dowel Pin, Dia. x." DECAL, CAUTION ON ANGLE PULLS Machined Collar, S Roller, " x /" Chain - S/POSI TRAK Collar Pin, Grooved for Cast Collar Washer, Flat -."IDx."ODxGA-plated Assembly, Tower Collar Locking Knob Block, Tower Manifold Straight Adapter, 00-- Fitting, Hyd #MBX - #MJ Bolt, /-0NC x / Hex Plated Gr. Hose, -FJX to MPX x 0" x /" ID Coupler, Female Flat Face Fitting, Hyd #MB - #MB Flange, /" Diameter Ram Bolt Washer, " Internal Tooth Lock Straight Adapter, 00-- Hose, " x /" ID -FJX to -FJX0M DECAL, TOWER, X Weldment, Wide Sure Lock Shaft Bolt, /" x." SHOULDER, /-THD LOCK NUT, /-THD NYLON LOCK INSERT WASHER, FLAT /" TRIMMED Assembly, evht Tower Cylinder (Global) DESCRIPTION

12 0 0 0

13 ITEM 0 0 P/N B 00-C Parts List DESCRIPTION Weldment, E/VHT Cabinet Nut, /-0 NC J Style Clip Assembly, Power Unit, E/VHT Screw, /-0 x /" Button Head Torx Plus Panel, E/VHT Pump Cabinet Front Adapter, / NPT to - FJX Hose, - FJX to /" NPT Male x 00" Long x /" ID Hose, - FJX to /" NPT Male x 00" Long x /" ID LABEL CAUTION LOCK LEVEL IMP-VHT LABEL, CAUTION CROSSMEMBER POSITION LABEL, CAUTION, LIFT SWITCH ON/OFF Decal, B of 00 Decal, C of 00 Decal, Mainframe, Goliath PLUG, INDUSTRIAL GROUNDING Assembly, Goliath Cabinet Back Panel Washer, /" Flat Bolt, /-0NC x /" Gr Plated DECAL, CHIEF AUTOMOTIVE LOGO WIRE HARNESS, PCB TO COILS COIL, V VALVE, CARTRIDGE MANIFOLD, CABINET ONE OUTLET

14 USER REPLACEABLE PARTS - CONTROL BOARD PENDANT MO V + S + 0 BLACK WHITE GREEN L NEU GND DN V - GND UP V - GND V - GND V - GND TL OL V 0 Parts List ITEM P/N DESCRIPTION 0 Printed Circuit Board - evht Cabinet 0 Relay, Adjustable Time Delay. - Second 00 Motor Contactor, VDC 00 MOV 0 VOLT 0 MOV 0 VOLT 00A 0 CONN, -POS HEADER PITCH.0mm 0 RELAY HOLDER DPDT PC MOUNT 0 DIOID, N0, AMP 0 TRANSFORMER, 0/0 - / PC 0 0 CAPACITER, 000mF REDIAL LEADS 0 HEADER -POS.00" ST. GOLD 0 SHUNT -POS.00" JUMPER 0 Fuse Holder. X. 0 RELAY DPDT VDC 0 BRACKET, TERMINAL BLOCK MOUNT 0 TERMINAL BLOCK POS 0 SCREW, #- x." PANHEAD-HEX 0 Nut, #- Nylock 000 Screw, #-x/" Socket Head Cap 0. ZIP TIE, NYLON 0 PCB Spacer Support 00 Wire Harness, PCB to Lift Switch 0 Wire Harness, PCB to Relay 0 Wire, Power Relay to Power Block 0 Wire, Power Relay Jumper 0 Wire Harness, PCB to Power Block 0 Wire, Power Relay to Power Block 0 FUSE. AMP

15 USER REPLACEABLE PARTS - CONTROL MANIFOLD V V V FRONT LIFT REAR LIFT AUX LINE # AUX LINE # AUX LINE# AUX LINE # AUX LINE # ITEM P/N Parts List DESCRIPTION Manifold, evht Block - Fluid Tech Valve, Spool, -Way, Normally Closed Cartridge Valve, way NC Poppet #0 Check Valve - Cartridge Style Plug, -ORB Flush Head Plug, -ORB Flush Head Coil, HydraForce VDC #0 Nut, Cartridge Coil Retainer # O ring Boss Plug, Hex Head

16 ASSEMBLY - AUXILIARY LINE ITEM P/N Parts List DESCRIPTION Straight Adapter, MB-MJ Hose, -FJX to / NPT male x 0" long x /" ID Valve, Auxillary Line /" Straight Connector, Male Flat Face Hose, -ORB to / NPT male x 0" long x /" ID PORTA-FRAME MANIFOLD ITEM P/N Parts List DESCRIPTION 0 Fitting, Hyd #MB - #MB Adapter, - JIC to - ORB 0 Coupler, Female Flat Face Bulkhead Elbow - Goliath Porta-Frame

17 EXPLODED VIEW - UNLOCK BAR ITEM P/N Parts List DESCRIPTION Weldment, Impulse VHT Unlock Rod Eye, Impulse VHT Unlock Fitting, Pneumatic, / NPT to / Press-to-Lock 0 Pneumatic Cylinder, /" bore x " stroke spring return Nut, /-0 UNF Jam Nut, /- UNF Hex Jam

18 CABINET TO MAINFRAME ASSEMBLY PART MANUAL ITEM P/N Parts List DESCRIPTION Straight Adapter, -JIC -ORB Hose Protector, evht Cabinet Connector, Male Flat Face Tubing, /" Soft Nylon Black Hose, Cabinet to Lift Control Cord, Six Conductor Mini-Line PORTA FRAME HYDRAULIC HOSES ITEM P/N Parts List DESCRIPTION Assembly, Goliath Porta-Frame Hydraulic Manifold Assembly,." Bore x 0." Stroke Lift Ram Fitting, Hyd #MB - #MJ w/ Orifice Hose, -FJX to -FJX x " Long x /" ID Hose, -FJX to - FJX x /" ID x " Long

19 Parts Manual BULKHEAD WIRING DETAIL V WHITE V BLACK GROUND V WHITE V BLACK V WHITE V BLACK TILT SWITCH WIRE # TILT SWITCH WIRE # ORANGE WIRE BLACK WIRE GREEN WIRE NOT USED RED WIRE WHITE WIRE BLUE WIRE

20

21

22

23

24 P.O. Box Grand Island, Nebraska 0- Phone: 0/- Fax: 0/- Chief reserves the right to alter product specifications and/or package components without notice. 00 Rev. /0 00 Chief Automotive Technologies