PEREGRINE Wearable Interface Model Two User Manual

Transcription

1 PEREGRINE Wearable Interface Mdel Tw User Manual

2 Table f Cntents Intrductin... 3 Package Cntents... 3 System Requirements... 3 Using The PEREGRINE Glve... 6 Calibrating the Tuch Pints... 7 Calibrating fr the First Time... 8 Calibrating Specific Tuch Pints Custmizing Keymaps Remapping Keys Saving a Keymap as a Prfile Lading a Prfile Ont the Pd Using the OPTIONS Tab General Precautins Maintenance Trubleshting Supprt Day Limited Warranty Infrmatin /18/2009 Page 2 f 20

3 Intrductin Cngratulatins n yur purchase f The PEREGRINE! Yu hld in yur hands a cutting-edge gaming device that allws yu t respnd mre rapidly in critical game situatins and play mre cmfrtably. With a bit f practice, yu will be able t play like yu never culd with a cnventinal keybard. The PEREGRINE is fully custmizable t yur unique hand characteristics. We encurage yu t spend time custmizing it and learning abut the unique features f the device. IMPORTANT: G t the sectin entitled, "General Precautins," BEFORE using this device. Package Cntents The PEREGRINE package shuld cntain the fllwing five items. 1. GlveBx cnfiguratin sftware installatin CD 2. The PEREGRINE Glve 3. Pd assembly with attached USB cable Pd faceplate 5. Glve strage case Figure 1. Package Cntents System Requirements Because The PEREGRINE uses standard keybard drivers, any cmputer that can use a USB keybard can use The PEREGRINE. T get the mst ut f The PEREGRINE, yu shuld install The PEREGRINE GlveBx cnfiguratin sftware. Yur PC must have these minimum requirements in rder t use The PEREGRINE effectively. Windws XP, Windws Vista, and Windws 7 (including 64-bit versins f the Windws perating systems).net Framewrk v1.1 (included) Intel r AMD Prcessr 512 MB RAM minimum a free USB 1.1 r 2.0 prt t cnnect The PEREGRINE 10 MB hard drive space fr installatin Nte: Check the website, fr infrmatin abut Mac cnfiguratin sftware requirements. 12/18/2009 Page 3 f 20

4 Anatmy f The PEREGRINE Take a lk at the unique features f The PEREGRINE. 1. Detachable Pd (with replaceable faceplate) LED 3. Ventilated Mesh 4. Stainless Steel Sensrs 5. Stainless Steel Cntact Pad 3 4 Figure 2. Glve Layut - Back 5 6. Adjustable Cuff 7. Palm Activatr Pad 8. Thumb Fat Activatr Pad 9. Thumb Tip Activatr Pad Typical User- Defined Tuch Pints 11. Visual Indicatr Pads Stainless Steel Sensrs 13. Ventilated Mesh 11 Figure 3. Glve Layut - Palm 12/18/2009 Page 4 f 20

5 Installing the GlveBx Cnfiguratin Sftware Insert the GlveBx installatin CD int yur CD ROM r CD/DVD ROM drive. Fllw the nscreen instructins prvided by the Setup Wizard. Read all warnings and the Terms and Cnditins. On yur PC, when the Setup Wizard windw pens: Click Next t advance the installatin. Click Back t return t the previus screen. Click Cancel t stp the installatin. The fllwing screen allws yu t custmize yur installatin. Figure 4. Sftware Installatin Brwse t the flder where yu want the prgram files t be installed n yur cmputer. Click Disk Cst t view the space available n yur strage disk. Select wh will have access t the GlveBx sftware. Click Everyne r Just me. After the sftware is successfully installed, the GlveBx prgram appears in yur PC s Start menu. This sftware lets yu calibrate The PEREGRINE Glve t yur hand size and remap the Tuch Pints. Nte: The installer als adds a flder n yur cmputer where yu can save varius keymap prfiles that yu can lad nt The PEREGRINE Pd. On yur PC, the path t this flder is Prgram Files > PEREGRINE > GlveBx Cnfiguratin Sftware > Prfiles. 12/18/2009 Page 5 f 20

6 Using The PEREGRINE Glve 1. Put the Glve nt yur hand and draw the fabric dwn each f the fingers and the thumb until the Glve seats snug n each digit. Clse the cuff strap securely n yur wrist. We strngly recmmend that yu remve any hand jewelry, including watches and rings, t ensure the best Glve fit and t reduce the chance f snagging r damaging the Glve. Manipulate the fabric t remve any twists r fabric bunching. The Stainless Steel Sensrs shuld lie smth alng the fingers and the Thumb Tip Activatr Pad shuld be psitined at the end f the thumb. Please nte that with a new Glve, it is nrmal fr the thumb tip cntact pad t feel a bit stiff. With sme use, the tip will sften and shape mre naturally t yur thumb. We recmmended that during the first few uses f a new Glve, that yu spend a bit f time gently frming the thumb and each f the fingers t the shape f yur hand. A snug, but nt verly tight fit helps increase tuch accuracy. 2. Align the Pd with the magnetic cnnectr seated n the back f the Glve. Make sure the Pd snaps int the cnnectr. The cable shuld run tward the cuff f the Glve. If yu are wearing a large watch, yu may want t remve it s it des nt hit the back f the Pd and disldge it when yu bend yur wrist. Pd Magnetic Cnnectr Figure 5. Glve Back Diagram 3. Insert the USB cnnectr attached t the end f the cable int a USB prt n yur cmputer. If this is yur first time cnnecting The PEREGRINE Glve, the cmputer shuld recgnize it as a new device. The Glve cnnects t any USB 1.1 r USB 2.0 prt n yur cmputer. 4. T cnfigure yur Glve, launch the GlveBx cnfiguratin sftware. Frm yur cmputer s Start menu, select Prgrams > GlveBx t launch the prgram. GlveBx allws yu t calibrate the Tuch Pints, select the keymap and LED pattern, remap keys, r lad prfiles. Instructins fr calibrating yur Glve are fund in Calibrating the Tuch Pints. 5. Once The PEREGRINE is calibrated, we strngly recmmended that yu play a practice game and spend 30 t 60 minutes getting cmfrtable with the feel and respnsiveness f the device. Experiment with varius layuts, calibratins, and Tuch Pint sizes until yu find a setup that is right fr yu. The PEREGRINE was designed t be custmized t yur hand s yu can interact quickly and effectively. Take time t experiment with and ptimize the device t create a mre effective and enjyable gaming experience. 6. When yu are dne with yur gaming sessin, simply discnnect the Pd frm the Glve by pulling gently upward near the base f the Pd t remve it frm the magnetic cnnectr. Remve the Glve frm yur hand and place it in the included strage case. Yu can leave yur Pd plugged int the USB prt s that, the next time yu start a gaming sessin, yu can simply snap the Pd nt the Glve and g. If yu need t leave the cmputer mmentarily while gaming, yu can simply discnnect the Pd frm the Glve and walk away. 12/18/2009 Page 6 f 20

7 Nte: Tuching metal bjects while wearing The PEREGRINE may cause the device t detect false tuches. Calibrating the Tuch Pints The 18 Tuch Pints and 3 Activatr Pads give yu ver 30 user-prgrammable actins. By simply tuching yur fingertips with yur thumb (r ther activatr pad), yu can cntrl yur games faster than ever befre. Fr the ultimate in accuracy, the GlveBx sftware lets yu further adjust the Glve t yur hand size by redefining the Tuch Pints. Tuch Pints Activatr Pads Figure 6. Glve Frnt Diagram It is necessary t calibrate all Tuch Pints befre yu use The PEREGRINE fr the first time. Later yu may find it helpful t recalibrate specific Tuch Pints t accmmdate hw yu use the Glve. The calibratin prcess lets yu adjust the lcatin f the Tuch Pints n the fingers f the Glve t the places yu tuch mst naturally. The silver traces running up and dwn the fingers f the Glve are the sensrs that pick up yur tuches, and the black circles n the fingers are visual indicatrs f apprximate Tuch Pint lcatins. These circles d nt detect yur tuches, and yu d nt have t calibrate yur Tuch Pints t them. The Tuch Pint size defines the size f the sensing zne fr the Tuch Pints. The larger yur Tuch Pint size, the larger the area f a single Tuch Pint alng the sensrs. Adjusting the Tuch Pint size helps yu prevent unwanted tuches, r it can increase respnsiveness withut requiring pinpint accuracy when yu tuch. The recmmended Tuch Pint Size is between 30 and /18/2009 Page 7 f 20

8 During cnfiguratin, yu can als select yur LED light pattern. The frnt-munted, ultra-bright LED n the Pd is designed t illuminate yur hand t create a unique light shw as yu play. On The LED is always On at a regular brightness. Bright The LED is always On at a higher brightness. Off The LED is always Off. Breath The LED cntinuusly transitins smthly frm Off t On. Laser The LED is always On and will flash brightly as yu hit the Tuch Pints. Calibrating fr the First Time It is necessary t calibrate all Tuch Pints befre yu use The PEREGRINE fr the first time. The calibratin prcess lets yu adjust the lcatin f the Tuch Pints n the fingers f the Glve t the mst natural places yu tuch. 1. Cnnect the Glve t yur cmputer. 2. Make sure GlveBx is running. Refer t Using The PEREGRINE Glve fr help launching GlveBx. 3. When the Glve status at the bttm f the windw displays CONNECTED, click the CALIBRATE tab. Figure 7. GlveBx CALIBRATE Tab 4. Select the Default Keymap frm the Active Keymap drp-dwn list. The Default Keymap cmes with The PEREGRINE. As yu create r dwnlad additinal keymaps, yu can use this drp-dwn list t select anther keymap withut recalibrating the Tuch Pints. 12/18/2009 Page 8 f 20

9 5. As shwn n the screen in Figure 7, click Run Full Test t calibrate the entire Glve fr the first time. The GlveBx sftware autmatically highlights the Tuch Pints yu are t calibrate. Figure 8. Run Full Test Screen 6. Tuch yur glved thumb t the Tuch Pint indicated by the blue highlight in the windw. The instructins n the tab walk yu thrugh the calibratin steps. Figure 9. Activatr Pad t Tuch Pint Activatr Pads are lcated n the tip and center f the thumb and n the palm. When yu calibrate a Tuch Pint with an Activatr Pad (preferably the Thumb Tip), it is autmatically calibrated fr all Activatr Pads. Yu d nt need t calibrate each Tuch Pint t each Activatr Pad. As well, the Activatr Pads themselves d nt need t be calibrated. We recmmend that yu use the Thumb Tip t calibrate the Glve. Yu can click Cancel t stp and save the cnfiguratin at any time. When calibrating the Glve fr the first time, be sure t calibrate every Tuch Pint. If yu d nt calibrate a Tuch Pint, please repeat the calibratin prcess. Once yu are dne calibrating the entire Glve, it is strngly recmmended that yu test yur Tuch Pints by clicking Test Map n the REMAP tab. Tuch yur fingers, and make sure the Glve respnds t yur tuches. 7. Select the LED Mde frm the drp-dwn list. This mde determines the Pd s LED light pattern. Yu can change the LED mde at any time even if yu are nt cnfiguring the Glve. 12/18/2009 Page 9 f 20

10 8. Use the slide bar t select the Tuch Pint Size. We recmmend a setting between 30 and 40 t start. As yu becme mre experienced with yur Glve, yu may want t experiment with different settings t get the feel yu want. Calibrating Specific Tuch Pints After using The PEREGRINE fr a time, yu may find it helpful t recalibrate specific Tuch Pints t accmmdate hw yu use the Glve. 1. Cnnect the Glve t yur cmputer. 2. Make sure GlveBx is running. Refer t Using The PEREGRINE Glve fr help launching GlveBx. 3. When the Glve is CONNECTED, click the CALIBRATE tab. 4. Click Calibrate Pad. Figure 10. Calibrate Pad Screen 5. On the Glve diagram, use yur muse t pint and click n the Tuch Pint yu want t calibrate. The Tuch Pint highlights in blue. Figure 11. Tuch Pint Selectin 6. Tuch the Thumb Tip Activatr Pad t the Tuch Pint indicated by the blue highlight in the windw. When tuched with the Activatr Pad, the Tuch Pint turns green. 7. Click Next. 8. Pint, click, tuch with yur Thumb Tip Activatr Pad, and click Next fr each Tuch Pint that yu want t calibrate. 12/18/2009 Page 10 f 20

11 9. If required, yu can use the slide bar t select the Tuch Pint Size. The larger yur Tuch Pint Size, the larger the sensing area f a single Tuch Pint alng the wire. Custmizing Keymaps Keymaps determine hw traditinal keybard strkes translate int the tuches f The PEREGRINE. When yu calibrated the Glve, yu determined where the hits were registered. The keymaps determine which keystrkes are generated frm specific Tuch Pints. The Pd itself stres the Default Keymap and up t 5 additinal keymaps that yu select n the GlveBx sftware CALIBRATE tab. At any time, additinal keymap prfiles can be created, saved n yur cmputer, and laded int ne f the 5 custm keymaps n the Pd. Remapping Keys Yu can change the keystrke the tuch generates fr any f the custmized keymaps frm the REMAP tab. The Default Keymap cannt be changed. 1. Cnnect the Glve t yur cmputer. 2. Make sure GlveBx is running. Refer t Using The PEREGRINE Glve fr help launching GlveBx. 3. When the Glve is CONNECTED, click the REMAP tab. 4. Select ne f the keymaps, 1 thrugh 5, frm the Keymap drp-dwn list n the right side f the screen. 5. Select the Thumb Tip, Thumb Fat, r Palm Activatr Pad. Each Activatr Pad has a unique Tuch Pint layut assciated with it. Fr example, yu can make yur pinter fingertip Tuch Pint generate an F when the Thumb Tip Activatr Pad tuches it. That same pinter fingertip Tuch Pint can generate a T when yur Thumb Fat Activatr Pad tuches it. It s all up t yu it s ttally custmizable. Figure 12. GlveBx REMAP Tab 6. Use the muse t select the Tuch Pint yu want t remap: 12/18/2009 Page 11 f 20

12 Click Clear t remve the stred key frm the selected keymap Tuch Pint. This will nly affect the current Tuch Pint, and it will nt remve previusly set keys. Click Remap t change the keystrke that the tuch replaces. On the keybard, type the new key t enter it int the pp-up windw. Click OK t save the key; click Clse t stp the remapping. Figure 13. Enter Keystrke Pp-Up Windw Saving a Keymap as a Prfile Yu may find that yu are cllecting a variety f keymaps fr a variety f games. Yu can stre specific keymaps n yur cmputer and lad them int the Pd when yu are ready t use them. Prfiles can be saved in the flder created during the GlveBx installatin: Prgram Files > PEREGRINE > GlveBx Cnfiguratin Sftware > Prfiles. 1. Make sure GlveBx is running. Refer t Using The PEREGRINE Glve fr help launching GlveBx. Nte: The Glve des nt have t be cnnected t yur cmputer t save prfiles. 2. Click the REMAP tab. 3. Select a keymap frm the Keymap drp-dwn list. Figure 15. Save As Prfile 4. Click Save As Prfile t save the selected keymap as a prfile. Saving a prfile transfers all keys under the selected keymap t a new prfile and pens the PROFILES tab. 12/18/2009 Page 12 f 20

13 Figure 15. GlveBx PROFILES Tab 5. Enter the prfile name in the Name text bx. 6. Click Save n the PROFILES tab. 7. In the Save dialg bx, select where t save the prfile. Click Save n the dialg bx. Nte: Yu can save prfiles t any lcatin n yur cmputer. In rder t lad prfiles nt the Pd, yu must mve them t the default Prfiles flder created when yu installed the GlveBx sftware. Lading a Prfile Ont the Pd The Pd can stre up t 5 custm keymaps. Yu lad additinal prfiles nt the Pd by verwriting Keymaps 1 thrugh Cnnect the Glve t yur cmputer. 2. Make sure GlveBx is running. Refer t Using The PEREGRINE Glve fr help launching GlveBx. 3. Click the PROFILES tab. Figure 16. Select a Prfile 12/18/2009 Page 13 f 20

14 4. Select a prfile t lad frm the Prfile drp-dwn list. This drp-dwn list shws the files available in the default Prfiles flder created at installatin. Only prfiles in this flder can be laded nt the Pd. Click Add t cpy a prfile stred in anther lcatin n yur cmputer t this default flder. 5. Click Lad. 6. In the dialg bx, select the keymap t verwrite with the new prfile, and click OK. Nte: The Default Keymap cannt be verwritten. Using the OPTIONS Tab The OPTIONS tab lets yu check fr updates t the sftware and firmware, find prduct versin and supprt infrmatin, and define the tab that pens first when yu launch GlveBx. 1. Make sure GlveBx is running. Refer t Using The PEREGRINE Glve fr help launching GlveBx. Nte: The Glve des nt have t be cnnected t yur cmputer t use the features n the OPTIONS tab. Figure 17. OPTIONS Tab 2. Click the OPTIONS tab. 3. In the Default Tab area, click the radi buttn next t the name f the tab that yu want t display each time yu launch the GlveBx sftware. 4. Click Check fr Updates t dwnlad updated sftware r firmware. The Update Applicatin pp-up windw shws the status f the updates. 12/18/2009 Page 14 f 20

15 Figure 18. N Updates Available Figure 19. Dwnlading Updates 5. Click OK when the update prcess cmpletes. 6. Click Supprt Infrmatin fr links t The PEREGRINE website and the website where yu can register yur prduct. General Precautins The PEREGRINE is suited fr use by mst peple. Hwever, there are sme general precautins t be aware f befre using The PEREGRINE. Only use the Pd with apprved Glve mdels. Avid handling fd r drink with the Glve. Never handle sharp r snagging bjects with the Glve. D nt handle, scrape, r frce the spring-laded cntact pins n the Pd. Avid fuling r scratching the cntact area n the Pd scket. D nt immerse, dip, r expse the Pd r USB cable t excessive misture r ther liquids. Neither the enclsure nr the spring-laded cntact pins are liquid tight. D nt expse the prduct t excessive dust r ther cntaminatin. D nt attach the Pd t any pwer surce except a current-limited, SELV-rated USB prt. 12/18/2009 Page 15 f 20

16 D nt repair, alter, r mdify the Pd in any way. The Pd des nt cntain any userserviceable parts. Discntinue use f the prduct if: the USB cable r Pd enclsure are cut, cracked, r damaged; any f the Activatr Pads r the Stainless Steel Sensrs becme detached; the Pd, USB cable, r Glve becme wet; the USB prt indicates that excessive current is being drawn by the Pd; the Pd temperature becmes ht t the tuch r yu experience any discmfrt r pain by using the prduct. Ensure the prper fit f the Glve. This prduct is intended t be wrn nly n yur hand. Make sure that yu are using an apprpriate-sized Glve s that it fits snugly but des nt create excessive pressure n yur hand, fingers, r wrist that culd restrict bld flw. Ensure that the cable des nt impair hand r arm mtin r circulatin. D nt wrap the cable tightly arund yur wrist r arm. If yu experience fatigue r discmfrt, stp using the prduct, and remve the Glve. Failure t d s culd result in lng-term injury. Avid excessive use f the Glve. D nt use this prduct if yu are tired r require sleep. Make sure that when using this prduct yu are standing r seated cmfrtably and that yur hand and arm are prperly supprted. Sme peple using this prduct may experience fatigue r discmfrt after playing fr lng perids f time. Yu shuld always take 10- t 15- minute, hurly breaks when using this prduct. If yur fingers, hands, r arms becme tired, numb, r uncmfrtable, stp and rest. If yu cntinue t experience discmfrt during r after using this prduct, discntinue using the prduct, and cnsult a physician. Failure t d s culd result in lng-term injury. Persns with health cnditins such as: finger, hand, r arm injuries; restricted peripheral circulatin r circulatry disrders; carpal tunnel syndrme, arthritis, r neurmuscular cnditins; wunds, infectins, dermatitis, allergies, r skin sensitizatin; r ther chrnic r acute health cncerns, shuld cnsult a physician fr advice and recmmendatins befre using this prduct. Use f this prduct culd aggravate these cnditins. Maintenance Please nte, DO NOT immerse the Pd r the USB cable int liquids, r expse them t excessive misture r ther liquids that might enter the enclsure r spring-laded cntact pins. Neither the Pd enclsure nr the spring-laded cntact pins are prtected frm liquid entry. After making sure t remve the Pd assembly s that it des nt get wet, yu can clean the Glve by fllwing the washing instructins n the fabric care label n the Glve. Yu may gently hand wash the Glve with mild sap and warm water fllwed by several rinses in clear warm water t cmpletely remve all sap residue. Use a sft twel t dry the cntact area and then blt the Glve dry between tw sft twels t remve excess misture. Allw the Glve t air dry cmpletely befre reattaching the Pd. The plastic Pd enclsure and Replaceable Faceplate may be cleaned using a very sft clth, lightly mistened with a husehld windw cleaning slutin. Make very sure t wipe gently s that yu d nt cause drps f misture r cleaning slutin t enter the enclsure r springladed cntact pins. Avid wiping directly arund the spring-laded cntact pins. 12/18/2009 Page 16 f 20

17 Abut every 4 weeks r sner if the Pd and Glve becme siled, yu may clean the Pd spring-laded cntact pins and the cnnectr area n the Glve using a cttn swab dipped in rubbing alchl. Gently clean n and arund the spring-laded cntact pins n the bttm f the Pd and n the matching gld-clred cntact area n the Glve cnnectr. Allw these t dry fully befre reattaching the Pd t the Glve. Trubleshting If it appears that The PEREGRINE Glve is defective, first cnsult the fllwing table. It might be that smething simply was verlked. Under n circumstances shuld yu try t repair the unit by yurself. Symptm Pssible Slutin The PEREGINE Glve is cnnected t the cmputer, but it des nt cnnect t the GlveBx cnfiguratin sftware. 1. Discnnect The PEREGRINE Glve frm the cmputer. 2. Clse the GlveBx sftware. 3. Restart yur cmputer. 4. Cnnect The PEREGRINE Glve t the cmputer. 5. Open the GlveBx sftware. The LED des nt light up. Verify that The PEREGRINE Glve USB cable is cnnected t the cmputer. Verify that the Pd is firmly snapped int the magnetic cnnectr. 1. Open the GlveBx sftware. 2. Click the CALIBRATE tab. 3. Verify that the LED Mde selected is nt Off. 12/18/2009 Page 17 f 20

18 Specificatins Electrical: Cautin: Only cnnect t a certified USB 1.1 r higher prt using an A-Type receptacle. Rated Input Pwer 5 VDC ± 80 ma (max) Physical: Pd: 40 mm x 35 mm x 11 mm with a 2 m cable equipped with a USB Type A plug Tw rws f 4 spring-laded cntacts (8 ttal) n the bttm surface Glve: Left hand wrn, elasticized Spandex fabric cnstructin, available in several nminal sizes Stainless steel mesh cntacts and spring-wund cnductrs Scket includes mating circuit cntacts fr spring-laded cntact pins n the Pd Envirnmental: Maximum Rated Ambient Temperature: 40ºC Humidity Pd 10 t 90% RH, nn-cndensing, n prtectin fr the entry f water r dust Glve 10 t 90% RH, nn-cndensing, during peratin (hwever, the Glve may be hand washed and dried accrding t the instructins fund elsewhere in this manual) Regulatry: This prduct has been tested t cmply with the fllwing electrical safety standards: CAN/CSA C22.2 N Infrmatin Technlgy Equipment Safety Part1: General Requirements UL , 2 nd Editin Infrmatin Technlgy Equipment Safety Part1: General Requirements This prduct shuld nly be used with the apprved accessries FCC Class B Cmpliance: This equipment has been tested and fund t cmply with the limits fr a Class B digital device, pursuant t Part 15 f the FCC Rules. These limits are designed t prvide reasnable prtectin against harmful interference in a residential installatin. This equipment generates, uses, and can radiate radi frequency energy and, if nt installed and used in accrdance with the instructins, may cause harmful interference t radi cmmunicatins. Hwever, there is n guarantee that interference will nt ccur in a particular installatin. If this equipment des cause harmful interference with radi r televisin receptin, which can be determined by turning the equipment ff and n, the user is encuraged t try t crrect the interference by ne r mre f the fllwing measures: Rerient r relcate the receiving antenna. Increase the separatin between the equipment and receiver. Cnnect the equipment int an utlet n a circuit different frm that t which the receiver is cnnected. Cnsult the dealer r an experienced radi/tv technician fr help. Industry Canada Class B Cmpliance: This digital apparatus des nt exceed the Class B limits fr radi nise fr a digital apparatus set ut in the Radi Interference Regulatins f the Canadian Department f Cmmunicatins. 12/18/2009 Page 18 f 20

19 Supprt Fr supprt infrmatin, g t cntact the Technical Supprt Line at Befre calling the Supprt Line, yu may find it helpful t refer t the website FAQ and Supprt sectins. 90-Day Limited Warranty Infrmatin 90-Day Limited Warranty IRON WILL INNOVATIONS, INC. warrants nly t the riginal Purchaser f this prduct frm an IRON WILL INNOVATIONS, INC., authrized reseller, r distributr that this prduct will be free frm defects in material and wrkmanship under nrmal use and service fr 90 days after date f riginal purchase. IRON WILL INNOVATIONS, INC. reserves the right, befre having any bligatin under this limited warranty, t inspect the damaged prduct at facilities designated by IRON WILL INNOVATIONS, INC., and all csts f shipping the prduct t IRON WILL INNOVATIONS, INC. fr inspectin shall be brne slely by the Purchaser. In rder t recver under this limited warranty, Purchaser must make claim t IRON WILL INNOVATIONS, INC. within 60 days f ccurrence and must present the riginal receipt f purchase fr the prduct r any frm f cpy that is deemed acceptable by IRON WILL INNOVATIONS, INC. IRON WILL INNOVATIONS, INC., at its ptin and in its sle discretin, shall repair r replace the defective unit cvered by this warranty. Please retain the dated sales receipt as evidence f the riginal Purchaser's date f purchase. Yu will need it fr any warranty service. In rder t keep this limited warranty in effect, the prduct must have been handled and used as prescribed in the instructins accmpanying this warranty. This limited warranty des nt cver any damage due t accident, misuse, abuse, r negligence, nr des it cver any prduct repaired r altered withut prir apprval f IRON WILL INNOVATIONS, INC. This limited warranty is valid nly if the prduct is used with the equipment specified n the prduct bx. Please check the prduct bx fr details, r call IRON WILL INNOVATIONS, INC. s Technical Supprt. This limited warranty is nn-transferable and des nt apply t any Purchaser wh bught the prduct frm a reseller r distributr nt authrized by IRON WILL INNOVATIONS, INC., including but nt limited t purchases frm Internet auctin sites. This warranty des nt affect any ther legal rights yu may have by peratin f law. Cntact IRON WILL INNOVATIONS, INC. at mailt:supprt@theperegrine.cmr at ne f the technical supprt numbers listed fr warranty service prcedures. DISCLAIMER OF WARRANTY EXCEPT FOR THE LIMITED WARRANTY PROVIDED HEREIN, TO THE EXTENT PERMITTED BY LAW, IRON WILL INNOVATIONS, INC. DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. LIMITATION OF LIABILITY REPAIR OR REPLACEMENT OF THIS PRODUCT, AT IRON WILL INNOVATION, INC. s ELECTION, IS YOUR EXCLUSIVE REMEDY. IRON WILL INNOVATIONS, INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST REVENUES, LOST PROFITS, LOSS OF USE OF SOFTWARE, LOSS OR RECOVERY OF DATA, RENTAL OF REPLACEMENT EQUIPMENT, DOWNTIME, DAMAGE TO PROPERTY, AND THIRD-PARTY CLAIMS ARISING OUT OF ANY THEORY OF RECOVERY, INCLUDING WARRANTY, CONTRACT, STATUTORY, OR TORT. 12/18/2009 Page 19 f 20

20 NOTWITHSTANDING THE TERM OF ANY LIMITED WARRANTY OR ANY WARRANTY IMPLIED BY LAW, OR IN THE EVENT THAT ANY LIMITED WARRANTY FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL IRON WILL INNOVATIONS, INC.'S ENTIRE LIABILITY EXCEED THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE AND PROVINCE TO PROVINCE. N actin fr breach f this warranty shall be cmmenced mre than ne year after the accrual f the cause f actin. This written warranty is the cmplete, final, and exclusive agreement f the parties with respect t the quality r perfrmance f the gds and any and all warranties and representatins. N mdificatin f this warranty r waiver f its terms shall be binding n either party unless apprved in writing by an authrized fficial f the party. This warranty and the rights and duties f the parties under this warranty shall be gverned by the law f Califrnia, the state f the Seller's principal place f business. Micrsft, Windws, Windws Vista, and the accmpanying lgs are either registered trademarks r trademarks f Micrsft Crpratin in the U.S. and/r ther cuntries. Mac and the Mac Lg are trademarks f Apple Inc., registered in the U.S. and ther cuntries. All ther trademarks are the prperty f their respective wners Irn Will Innvatins, Inc. All rights reserved. Prtected under U.S. Patent N. 7,498,956. Other U.S. and internatinal patents pending. 12/18/2009 Page 20 f 20