SENTRON T Electrical Measurement Transducer
|
|
- Gillian Patterson
- 5 years ago
- Views:
Transcription
1 SETRO T Electricl Mesurement Trnsducer Energy utomtion tlog SR nswers for energy.
2 ontents SETRO T Electricl Mesurement Trnsducer Energy utomtion tlog SR Invlid: tlog Siemens T ontens Pge Device Description 4 pplictions 5 Specific Functions nd Design 6 Mesurnds ccording to the onnection Type 7 onnection Types 8 Grphicl User Interfce 9-10 Technicl Dt Ordering Dt 13 onnection Digrm / Dimension Drwings 14 E nd IE onformities 15 SETRO T Electricl Mesurement Trnsducer Siemens SR
3 Device Description The SETRO T is n electricl mesurement trnsducer tht llows the mesurement of electricl quntities in electricl networks in single unit. In industries, power plnts nd substtions, especilly trnsducers re used for mesurnd (e.g. current, voltge, power, phse ngle, energy or frequency) ssignment into further processing through nlog outputs or communiction interfce for precise control, notifiction or visuliztion tsks. Device type Top-ht ril mounted device Plstic cse 96 mm 96 mm 100 mm (W H D) Degree of protection IP20. Input nd output circuits 4 inputs for lternting voltge mesurements 3 inputs for lternting current mesurements up to 10 continuous 4 D nlog outputs freely configured: Direct currents: 0 m to 20 m, 4 m to 20 m nd -20 m to 20 m Direct voltges: 0 V to 10 V nd -10 V to 10 V individully progrmmble binry outputs. Signliztion LEDs utomticlly monitors the functions of its hrdwre, softwre, nd firmwre components. ommuniction Ethernet: MODUS TP communiction protocol Optionl seril RS485 interfce tht enbles the device to communicte vi the MODUS RTU or the IE communiction protocol. Mesurnds The following mesurnds cn be recorded or clculted from the mesured quntities: TRMS (True RMS) for lternting voltge nd current ctive, rective nd pprent power ctive, rective nd pprent energy Power frequency Phse ngle Power fctor nd ctive power fctor. Time synchroniztion For common time bsis when communicting with peripherl devices nd time stmping of the process dt. Externl time synchroniztion vi Ethernet TP Externl time synchroniztion vi field bus using the MODUS RTU or the IE communiction protocol Internl time synchroniztion vi RT (if externl time synchroniztion is not vilble). Response time for nlog nd binry outputs The fster response time of the nlog nd binry output is very importnt feture of SETRO T tht enbles relible rection of the controlling pplictions. The response time of the device is 120 ms t 50 Hz nd 100 ms t 60 Hz. Fig. 1 SETRO T electricl mesurement trnsducer pplictions onversion nd integrtion of mesurnds into substtion utomtion, protection or SD process vi RTU nd/or vi protocol IE for further control nd/or monitoring tsks Monitoring of lower voltge levels nd hevy lod control, e.g. ir conditioning nd motors. Min fetures Design: ompct nd robust for flexible ppliction in industril nd utility environments onnections in 1-phse systems, in 3-wire nd 4-wire systems pplictions: flexible for power utilities, industril nd commercil sectors pplictions Mesurements: up to 60 mesured or clculted vlues vilble Temperture rnge: -25 to +55 High ccurcy: typiclly 0.2 % for voltge nd current t rted input High EM immunity: ccording to IE Highlights Flexible current mesurement rnge (up to 2 I n ) 4 fst nlog outputs (rection pprox. 120 ms t 50 Hz nd 100 ms t 60 Hz) for relible control 2 individully binry outputs for fst switching, indictions (e.g., limit violtion) nd opertion sttus monitoring 4 LEDs for locl sttus visuliztion Ethernet communictions vi MODUS TP nd seril interfce vi MODUS RTU or IE Internl bttery for rel time clock nd sving of energy counter vlues in cse of power outge User-friendly opertion through Web server (no extr softwre for prmeteriztion needed, no converters nd extr cbles) Rel time clock (RT), field bus synchroniztion or network synchroniztion possible vi TP. 4 SETRO T Electricl Mesurement Trnsducer Siemens SR
4 pplictions SETRO T pplictions: locl monitoring or control purposes through ssignment of up to 60 vilble electricl prmeters to nlog outputs, notifictions through binry outputs or integrtion into SD/monitoring systems through communiction interfce, e.g. seril IE , MODUS RTU or MODUS TP Ethernet. Field level U,I 1. RTU 2. 4 nlog outputs 3. 4 nlog outputs 4. inry outputs ontrol center U,I U,I U,I lrms, mesurements nd indictions Seril: MODUS RTU or IE (optionl) Ethernet/ MODUS TP Field device level SETRO T 1 2 SETRO T 3 SETRO T 4 SET T-0017.E.i Prmeteriztion/ vlue disply Fig. 2 SETRO T pplictions ppliction exmples ppliction re Voltge urrent Power Frequency Phse ngle Genertion substtion Trnsmission substtion Trnsformer substtion Trnsformer distribution Genertor Incoming line Outgoing line Incoming line us Feeder Incoming line us Feeder Process SD / EMS / DMS Energy mngement Energy lrm Internl cost lloction Motors ommercil (e.g. ir conditioning) SETRO T Electricl Mesurement Trnsducer Siemens SR
5 Specific Functions nd Design Mesurement process nd connections The mesurements re obtined from the lternting quntities of current nd voltge supplied to the different mesuring inputs. Rted input lternting voltges up to U ph- = 400 V nd U ph- = 400 V cn be fed in using internl resistive input voltge dividers. The internl current trnsformers process rted input lternting currents up to 5. The circuits connected on the input side re isolted glvniclly from the current trnsformers to ensure tht the potentil is decoupled. The input vlues re processed nd then output s nlog vlues or digitl dt by the corresponding Interfces, converted into direct currents nd/or direct voltges depending on the prmeter settings or trnsmitted to peripherl devices for nlysis. Internl time synchroniztion vi RT with qurtz oscilltor (if externl time synchroniztion is not vilble) Electricl ssembling SETRO T 7KG9661 contins the following electricl modules depending on the device version: Digitl signl processor (DSP) 4 inputs for voltge mesurements 3 inputs for current mesurements 4 D nlog outputs 2 binry outputs Supply voltge Seril RS485 interfce (optionl) Response time for nlog outputs The fster response time of the nlog nd binry output is very importnt feture of SETRO T tht enbles relible rection of the controlling pplictions. The response time of the device is 120 ms t 50 Hz nd 100 ms t 60 Hz. Input Terminl block F Terminl block E 4 x voltge terminl Mx. 690 V (phse-phse) Mx. 400 V (phse-neutrl) 3 x current terminls x LEDs 4 x nlog outputs 0 m to 20 m 4 m to 20 m nd -20 m to 20 m 0 V to 10 V nd -10 V to 10 V 2 x binry outputs 230 V V or 250 V D Terminl block K Terminl block G Time Terminl block H Power supply V D V RS 485 Seril Modbus RTU / IE Terminl block J Mesuring cycle IP ddr button Ethernet Modbus TP 10/100 Mbit/s Terminl block Z Output X ms 60 ms Fig. 4 lock digrm SETRO T 7KG9661 SET T-0018.E.i SET T-0005.E.i Fig. 3 Response time digrm Time Response time X+60 ms Worst cse: X=60 ms 60 ms + 60 ms=120 ms Mechnicl design The electricl modules re instlled in plstic cse with the dimensions 96 mm 96 mm 100 mm (W H D). The cse is prepred for mounting on top-ht ril. The top side of the device ccommodtes the RJ45 Ethernet connector with two LEDs nd four dditionl LEDs. ommuniction To communicte with the systems control nd other process utomtion equipment, the device fetures n Ethernet interfce, nd if instlled in the device model, n RS485 interfce. Ethernet supports the device prmeteriztion, the trnsmission of mesured dt, metered vlues nd indictions nd the time synchroniztion vi TP. The communiction protocols re HTTP nd MODUS TP. The RS485 interfce supports the trnsmission of the mesured dt, metered vlues nd indictions nd the time synchroniztion. Depending on the device version, you cn use either the MODUS RTU or the IE communiction protocol. Time synchroniztion The following types of time synchroniztion cn be executed: Externl time synchroniztion vi Ethernet TP (preferred) Externl time synchroniztion vi field bus using the MODUS RTU or the IE communiction protocol /- L/ Fig. 5 onnectors on the device 4 3 SET T-0008.i inry outputs RS485 interfce D nlog outputs Inputs for voltge mesurement Supply voltge Inputs for current mesurement 6 SETRO T Electricl Mesurement Trnsducer Siemens SR
6 Mesurnds ccording to the onnection Type Power mesurnds in power systems Mesurnd ircuit 1-phse system blnced (1I) 3-wire network (delt) unblnced (3I) unblnced (2I) 4-wire network (str) blnced (1I) voltge U - unblnced (3I) U b b- U c c- U b, U bc, U c -b, b-c, c- U, b, c U vg, b, c U ph /3 current I ctive power fctor I b, I c b, c I, b, c I vg, b, c U ph /3 cos φ () cos φ (b), cos φ (c) b, c cos φ, b, c Power fctor PF PF b, PF c b, c PF, b, c Phse ngle φ φ b, φ c b, c φ, b, c Frequency f, b, c ctive power P P b, P c b, c P, b, c Rective power Q Q b, Q c b, c Q, b, c pprent power S ctive energy supply ctive energy demnd Rective energy inductive Rective energy cpcitive S b, S c b, c S, b, c WP supply WP b supply, WP c supply b, c WP supply, b, c WP demnd WP b demnd, WP c demnd b, c WP demnd, b, c WQ inductive WQ b inductive, WQ c inductive b, c WQ inductive, b, c WQ cpcitive WQ b cpcitive, WQ c cpcitive b, c WQ cpcitive, b, c pprent energy WS WS b, WS c b, c WS, b, c SETRO T Electricl Mesurement Trnsducer Siemens SR
7 onnection Types SETRO T 7KG9661 supports the following connection types: 1-phse system 3-wire network (blnced) 3-wire network (unblnced), 2 current inputs 3-wire network (unblnced), 3 current inputs 4-wire network (blnced) 4-wire network (unblnced) 1-phse system, no voltge trnsformer 4-wire network, 1 voltge trnsformer nd 1 current trnsformer, blnced I urrent I I Voltge I urrent I I Voltge PE S1 S2 PE b () P1 P2 SET T-0009.E.i S1 () P1 (b) (c) S2 P2 SET T-0013.E.i 3-wire network, 2 voltge trnsformers nd 1 current trnsformer, blnced* 4-wire network, no voltge trnsformer nd 3 current trnsformers, unblnced I urrent I I Voltge I urrent I I Voltge PE S1 () P1 (b) (c) S2 P2 b b SET T-0010.E.i PE S1 S2 S1 S2 S1 S2 () (b) (c) SET T-0014.E.i 3-wire network, 2 voltge trnsformers nd 3 current trnsformers, unblnced* 4-wire network, 3 voltge trnsformers nd 3 current trnsformers, unblnced I urrent I I Voltge I urrent I I Voltge PE b b S1 S2 S1 S2 S1 S2 () (b) (c) SET T-0012.E.i PE S1 S2 S1 S2 S1 S2 () (b) (c) b b b SET T-0015.E.i Fig. 6 onnection types * Importnt: The mximum secondry voltge for this connection exmple is 480 V. The mximum llowble voltge between phse nd ground must not be exceeded. 8 SETRO T Electricl Mesurement Trnsducer Siemens SR
8 Grphicl User Interfce Prmeteriztion nd monitoring softwre The device is configured from connected P or notebook only. The user interfce SETRO T GUI (GUI = Grphicl User Interfce) is implemened in the device, mening tht for the whole opertion nd prmeteriztion of the device no dditionl softwre is required. You cn nvigte through Microsoft Internet Explorer using the icons on the toolbr. Device sttus, so s communiction, prmeteriztion, log files, vlue view, nd mintennce cn be esily proceeded through SETRO T GUI interfce. Online help ddress br Tb Menu br Microsoft Internet Explorer Toolbr vigtion br Sttus br Input/output window vigtion window Element Menu Fig. 7 Lyout of the SETRO T GUI user interfce Informtion The nvigtion window of the Informtion tb contins the device informtion, nd opertive nd device logs. Here you get the complete overview bout the device sttus. Fig. 8 Informtion tb, shows device informtion input/output window SETRO T Electricl Mesurement Trnsducer Siemens SR
9 Grphicl User Interfce onfigurtion The configurtion mode llows you to set the device prmeters. You cn tilor the process connections to the instlltion environment, specify the limits of the mesuring rnges, prmeterize the communiction nd mke vrious opertionl settings. Fig. 9 D nlog outputs input/output window Vlue View The mesured vlues re displyed in the Vlue View tb. opertionl vlues power nd energy D nlog outputs inry outputs Mesurnd limits Depending on which opertionl prmeters re selected, the input/ output window displys the mesured vlues of the mesurnds with the corresponding unit or indictions in tbulr list tht is updted every 5 s. Fig. 10 Vlue View tb Mintennce In the Mintennce tb, you cn updte the firmwre, perform clibrtion, mke vrious presettings, view nd delete logs nd nlyze protocol-specific communiction dt of MODUS / IE Fig. 11 Mintennce tb 10 SETRO T Electricl Mesurement Trnsducer Siemens SR
10 Technicl Dt Electricl dt / inputs Inputs for lternting voltge mesurements Rted input voltge phse-/pe 63.5 V, 110 V, (selectble vi prmeter) 230 V, 400 V Mx. input voltge 1.2 rted input voltge Mx. supply voltge phse-/pe 480 V phse-phse 831 V Power consumption per input for 38 mw U rted 400 V Permissible power frequency 45 Hz to 65 Hz Input impednces, b, c to, b, c, to PE -b, b-c, c- Mesuring error (with clibrtion) t 23 ±1 ; 50 Hz or 60 Hz 7.9 MΩ 3.9 MΩ 7.9 MΩ typiclly 0.2 % t rted input voltge ontinuous overlod cpcity 1.5 rted input voltge (600 V) Surge overlod cpcity 2 rted input voltge (800 V) ccording to IE Inputs for lternting current mesurements Rted input current rnges 1, 5 (vi Prmeter selectble) Mx. input current 2 rted input current Mx. rted input voltge 150 V Power consumption per input t 1 t 5 Permissible power frequency Mesuring error (with clibrtion) t 23 ±1 ; 50 Hz or 60 Hz: Therml stbility 1 mv 2.5 mv 45 Hz to 65 Hz typiclly 0.2 % t rted input current 10 continuous 100 for mx. 1 s ccording to IE Electricl dt / outputs D nlog outputs Use s current outputs (direct current) Rted output current ±20 m Mximum output current ±24 m Mximum lod impednce < 400 Ω (incl. line impednce) Short-circuit current ±24 m (short-circuit proof) o-lod voltge (idling-proof) 15 V, Mesuring error (with clibrtion) mx. 0.1% t rted current t 23 ±1 Response time 120 ms (50 Hz), 100 ms (60 Hz) D nlog outputs Use s voltge outputs (direct voltge) Rted output voltge ±10 V Mximum output voltge ±12 V Minimum lod impednce 1 kω Short-circuit current ±24 m (short-circuit proof) Mesuring error (with clibrtion) mx. 0.1 % t rted voltge t 23 ±1 Response time 120 ms (50 Hz), 100 ms (60 Hz) inry outputs Mximum switching voltge lternting voltge Direct voltge Mximum continuous contct current Mximum pulse current for 0.1 s Internl impednce dmissible switching frequency umber of switching cycles 230 V 250 V 100 m 300 m 35 Ω 10 Hz unlimited Tolernce limits Mesurnd Unit Rted vlue Tolernce limits 1) Voltge U ph-ph (delt) cc. to prmeteriztion Voltge U ph- (str) cc. to prmeteriztion urrent I cc. to prmeteriztion ctive Power P + demnd, -supply Rective Power Q + inductive, -cpcitive V 110 V 190 V 400 V 690 V 63.5 V 110 V 230 V 400 V 1 5 ±0.2 % ±0.2 % ±0.2 % W ±0.5 % ±0.5 % pprent power S ±0.5 % Power fctor PF 2) ±1.0 % Mesurnd Unit Rted vlue Tolernce limits 1) Power fctor PF 2) ±1.0 % ctive power fctor cos φ 2) ±1.0 % Phse ngle φ 2) Degree 2 Frequency f Hz 50 Hz, 60 Hz 10 mhz (from 30 % to 120 % U rted ) ctive energy WP _Demnd Wh ±0.5 % ctive energy WP _Supply Wh ±0.5 % Rective energy WQ _inductive vrh ±0.5 % Rective energy WQ _cpcitive vrh ±0.5 % pprent energy WS Vh ±0.5 % 1) Tolernce limits under reference conditions 2) Mesurements from 2 % of the rted pprent power vlue onwrds in the selected mesuring rnge SETRO T Electricl Mesurement Trnsducer Siemens SR
11 Technicl Dt Generl electricl dt nd reference conditions Supply Voltge Rted input voltges System frequency t dmissible input voltge tolernce (vlid for ll input voltges) Permitted ripple of the input voltge t 24 V D, 48 V D, 60 V D, 110 V D, 220 V D, 250 V D Permitted hrmonics t 115 V, 230 V Mx. inrush current t 110 V D; 115 V t 220 V D to 300 V D; 230 V Mximum power consumption ttery Type Voltge pcity ommuniction dt 110 V to 230 V or 24 V D to 250 V D 45 Hz to 65 Hz ±20 % 15 % 2 khz < (fter 250 μs: < 5 ) 6 W / 9 V R V 230 mh Ethernet us protocol MODUS TP Trnsmission rte 10/100 Mbit/s ommuniction protocol IEEE onnection 100se-T (RJ45) ble for 100se-T 100 Ω to 150 Ω STP, T5 Mximum cble length 100se-T 100 m (if well instlled) Voltge strength 700 V D Seril RS485 interfce onnection us protocol MODUS RTU ud rte Prity Protocol Mx. cble length, depending on dt rte 9-pin D-sub plug connector 9,600 bit/s, 19,200 bit/s, 38,400 bit/s, 57,600 bit/s even, even (fixed),odd, no (1 or 2 stop bits) hlf-duplex 1,000 m Trnsmission level low: -5 V to -1.5 V high: +5 V to +1.5 V Reception level low: -0.2 V high: +0.2 V us termintion not integrted, bus termintion using plugs with integrted bus terminting resistors us protocol IE ud rte Mx. cble length, depending on dt rte 9,600 bit/s, 19,200 bit/s, 38,400 bit/s 1,000 m Trnsmission level low: -5 V to -1.5 V high: +5 V to +1.5 V Reception level low: -0.2 V high: +0.2 V us termintion not integrted, bus termintion using plugs with integrted bus terminting resistors Degree of protection ccording to IE Device front IP20 Device rer (connections) IP20 Reference conditions for determining the test dt (precision specifictions under reference conditions) Rted input current ±1 % Rted input voltge ±1 % Frequency 45 Hz to 65 Hz urve shpe sine, totl hrmonic 5 % distortion mbient temperture 23 ±1 Supply voltge VH ±1 % Wrm-up time 15 min Interfering fields none Environmentl dt Supply voltge Operting temperture continuous opertion -25 to +55 Temperture during trnsporttion during storge Mximum temperture grdient ir humidity men reltive ir humidity per yer mximum reltive ir humidity ondenstion during opertion during trnsporttion nd storge Regultions nd stndrds limte old Dry het during opertion, storge, nd trnsporttion -25 to to K/h 75 % 95 % 30 dys yer not permitted permitted IE Test d IEEE IE Test d IEEE Dmp het DI E : IEEE Dmp het cyclic IE Test Db hnge of temperture IE Tests nd b Individul gs test, industril tmosphere, sequentil gs test IE Test Kc IE Flowing mixed gs IE Method 4 Slt fog test IE Test K Mechnics Vibrtion during opertion IE Test Fc IE SETRO T Electricl Mesurement Trnsducer Siemens SR
12 Ordering Dt Description Electricl mesurement trnsducer Ethernet RJ45, MODUS TP nd Web server on bord Order o KG F Device type Din-ril mounting device without disply, IP20 4 inputs for voltge mesurements, 3 inputs for current mesurements 2 binry outputs input circuits nd cse Resistive voltge divider se 96 mm 96 mm 100 mm (W H D) D nlog outputs 4 D nlog outputs: -20 m to 20 m / -10 V to 10 V (individully prmeterizble) Seril interfce nd communiction protocol Without 0 RS485/MODUS RTU 1 RS485/MODUS RTU nd IE Description Ethernet ptch cble for prmeteriztion with double shield (SFTP), cross-over connection L connector t both ends SETRO T < > P; length: 3 m Order o KE G E SETRO T Electricl Mesurement Trnsducer Siemens SR
13 onnection Digrm / Dimension Drwings I I I E F urrent Voltge 1 K G 1 2 SET T-0019.E.i H Power supply L/+ L/ Seril interfce RS 485 Ethernet interfce J Z 9-pole Fig. 12 onnection digrm 96 Guiding of the snp-in clip /- L/ Top-ht ril Snp-in clip SET T-0020.E.i Dimensions in mm Relese device Pulling direction Fig. 13 Dimension drwings 14 SETRO T Electricl Mesurement Trnsducer Siemens SR
14 E nd IE onformities E conformity This product conforms to the directives of the ouncil of the Europen ommunities on the hrmoniztion of the lws of the Member Sttes relting to electromgnetic comptibility (EM ouncil Directive 89/336/EE) nd concerning electricl equipment for use within specified voltge limits (low-voltge directive 73/23/EE). This product conforms to the interntionl stndrd IE nd the Europen stndrd E for voltge chrcteristics. The product is designed for use in n industril environment cc. to the EM stndrd specifiction cc. to IE onformity hs been proven by tests performed by Siemens G in line with rticle 10 of the ouncil Directives in ccordnce with the generic stndrd E nd IE for lss mesurement. SETRO T Electricl Mesurement Trnsducer Siemens SR
15 Published by nd copyright 2010: Siemens G Energy Sector Freyeslebenstrße Erlngen, Germny Siemens G Energy Sector Power Distribution Division Energy utomtion Humboldtstr uremberg, Germny For more informtion, plese contct our ustomer Support enter. ustomer Support enter. Tel.: Fx: (hrges depending on provider) E-mil: support.energy@siemens.com Order o. E50001-K Printed in Germny Dispo 06200, c4bs 7442 KG En 3600 / Printed on elementry chlorine-free bleched pper. ll rights reserved. lf not stted otherwise on the individul pges of this ctlog, we reserve the right to include modifi ctions, especilly regrding the stted vlues, dimensions nd weights. Drwings re not binding. ll product designtions used re trdemrks or product nmes of Siemens G or other suppliers. lf not stted otherwise, ll dimensions in this ctlog re given in mm/inch. Subject to chnge without prior notice. The informtion in this document contins generl descriptions of the technicl options vilble, which my not pply in ll cses. The required technicl options should therefore be specifi ed in the contrct.
CVM-B100 CVM-B150. Power analyzer for panels
Power nlyzers CVM CVM-100 CVM-150 Power nlyzer for pnels Description High-end power nlyzers, verstile nd expndle, with 4-qudrnt mesurement (Consumption nd Genertion). Suitle for high nd low Voltge instlltions,
More informationCVM-A1500. Power analyzer for panel with power quality measurement parameters
nlizdores de redes CVM-1500 Power nlyzer for pnel with power qulity mesurement prmeters Description CVM-1500 is pnel mounted power qulity nlyzer with EMS (Energy Mngement Softwre) integrted. Its internl
More informationEngineer To Engineer Note
Engineer To Engineer Note EE-169 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit
More informationPOWER COMBICON spring-cage connector 7.62 mm pitch SPC 5/...-ST(F)-7,62
spring-cge connector SPC 5/...-ST(F)- Especilly in the high current rnge, the following is true for conductor connection: Time is money. The new spring-cge plug SPC 5 sves both, s due to the quick spring-cge
More informationTechnical data. General specifications. Transducer frequency Indicators/operating means
Model Number Fetures Ultrsonic system for relible detection of no, one, or two overlpping sheet mterils, preferbly ppers Short version No TEACH-IN required Function indictors visible from ll directions
More informationEnergy Automation. SICAM T Digital Measurement Transducer. Answers for infrastructure and cities.
Energy utomation SIM T Digital Measurement Transducer nswers for infrastructure and cities. ontents SIM T Page Device description 3/3 pplications 3/4 Specific functions and design 3/5 Measurands 3/6 onnection
More informationInstallation Instructions for the TBVL Valve Set GOLD/COMPACT
Instlltion Instructions for the TBVL Vlve Set GOLD/COMPACT. Generl The TBVL vlve set is set of components for controlling n ir heter/ir cooler nd consists of ()-wy vlve, vlve ctutor, connection cble with
More informationVer 1.2. Radiation Hardened Bidirectional Multipurpose Transceiver. Datasheet. Part Number:B54ACS164245SARH
Ver 1.2 Rdition Hrdened Bidirectionl Multipurpose Trnsceiver Dtsheet Prt Number:B54ACS164245SARH 1 Pge of Revise Control Version No. Publish Time Revised Chpter Revise Introduction Note 1.1 2016-08-15
More information1500W Programmable Single Output
Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 105%) Progrmmle output Current (0% ~ 105%) Forced current shring t prllel opertion Refer to pg. 5 for connection digrm) Constnt current
More informationE201 USB Encoder Interface
Dt sheet Issue 4, 24 th ugust 2015 E201 USB Encoder Interfce E201-9Q incrementl E201-9S bsolute bsolute SSI BiSS-C mode (unidirectionl) B Z Clock Dt M SLO The E201 is single chnnel USB encoder interfce
More information800W Programmable Single Output
Fetures: U Design Progrmmle output Voltge (0% ~ 05%) Universl AC input / Full rnge Progrmmle output Current (0% ~ 05%) Refer to pg. 5 for connection digrm) Forced current shring t prllel opertion Constnt
More informationIZT DAB ContentServer, IZT S1000 Testing DAB Receivers Using ETI
IZT DAB ContentServer, IZT S1000 Testing DAB Receivers Using ETI Appliction Note Rel-time nd offline modultion from ETI files Generting nd nlyzing ETI files Rel-time interfce using EDI/ETI IZT DAB CONTENTSERVER
More information1500W Programmable Single Output 15V 24V 30V 36V 48V 60V 100A 62.5A 50A 41.7A 31.3A 25A. ±5.0% Typical adjustment by potentiometer.
500W Progrmmle Single Output Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 05%) Progrmmle output Current (0% ~ 05%) Forced current shring t prllel opertion Constnt current limit
More informationMetal Element Current Sense Resistor
Metl Element Current Sense Resistor UR Series Robust metl strip ble to withstnd high temperture nd high current. ow TCR nd Inductnce Resistnce Rnge from m to 15 m Power rtings from 1W to 3W in 1206, 2010
More information800W Programmable Single Output. 105% rated output power, Protection type: Constant current limit
Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 05%) Progrmmle output Current (0% ~ 05%) Forced current shring t prllel opertion Constnt current limit Selectle +5V / 0.5A or +9V /
More informationLow-Voltage Controls and Distribution
Commnding nd Signling evices Pushbuttons nd Indictor Lights Consoles Switches Signling Columns Reference Mnul April 2009 Low-Voltge Controls nd istribution Commnding nd Signling evices 4 Introduction
More informationTEK-F LEX 4100B. Two-wire Loop-powered OEM TDR Level Transmitter. LEVEL. Technology Solutions
Technology Solutions TEK-F LEX 4100B Two-wire Loop-powered OEM TDR Level Trnsmitter LEVEL www.tek-trol.com Flow Level Temperture Pressure Vlves Anlyzers Accessories TekVlSys Introduction Tek-Flex 4100B
More informationNetBackup 5200 Release 1.1 Quick Installation Guide
NetBckup 5200 Relese 1.1 Quick Instlltion Guide Revision: 01 Dte: 2010-08-30 Environment Check Before Instlltion You cn instll the NetBckup 5200 pplince in stndrd 19-inch cbinet (with n AC distribution
More informationCatalog Power Supplies
Ctlog Power Supplies 2016 / 06 Phone.: +49 (0) 8031-6506-0 Fx: +49 (0) 8031-6506-50 DC / DC Power Supplies 12 Vdc Output type numbers: 00791 00845 00846 00847 DC / DC Power Supplies 12 Vdc Output type
More informationLoRaWANTM Concentrator Card Mini PCIe LRWCCx-MPCIE-868
Dt Sheet LoRWANTM Concentrtor Crd Mini PCIe LRWCCxMPCIE868 LoRWANTM Concentrtor Crd bsed on Semtech SX30 nd SX308 Chips in Mini PCIe Form Fctor The nfuse LRWCCxMPCIE fmily of crds enble OEMs nd system
More informationMulti-position printed circuit termination blocks for through hole reflow applications
Multi-position printed circuit termintion blocks for through hole reflow pplictions With the modern SMT solder technology, proven housing profiles from the printed circuit terminl block rnge from Phoenix
More informationTilt-Sensing with Kionix MEMS Accelerometers
Tilt-Sensing with Kionix MEMS Accelerometers Introduction Tilt/Inclintion sensing is common ppliction for low-g ccelerometers. This ppliction note describes how to use Kionix MEMS low-g ccelerometers to
More informationSimrad ES80. Software Release Note Introduction
Simrd ES80 Softwre Relese 1.3.0 Introduction This document descries the chnges introduced with the new softwre version. Product: ES80 Softwre version: 1.3.0 This softwre controls ll functionlity in the
More informationMcAfee Network Security Platform
NTBA Applince T-200 nd T-500 Quick Strt Guide Revision B McAfee Network Security Pltform 1 Instll the mounting rils Position the mounting rils correctly nd instll them t sme levels. At the front of the
More informationInformation regarding
Informtion regrding LANCOM Advnced VPN Client 3.13 Copyright (c) 2002-2017 LANCOM Systems GmbH, Wuerselen (Germny) LANCOM Systems GmbH does not tke ny gurntee nd libility for softwre not developed, mnufctured
More informationInstallation manual. Daikin Altherma low temperature monobloc option box EK2CB07CAV3. Installation manual. English
Instlltion mnul Dikin Altherm low temperture monobloc option box EKCB07CAV Instlltion mnul Dikin Altherm low temperture monobloc option box English Tble of Contents Tble of Contents About the documenttion.
More information3 Talk to Us First. Reasons You Should. Non-Contact Temperature Measurement Solutions
3 Tlk to Us First Resons You Should Non-Contct Temperture Mesurement Solutions Reson # 1 Fixed System Spot Thermometers FACTS Verstile technologies re must for the ever expnding list of pplictions Lnd
More informationJULIET. Joystick. OpTIOns. FEaTUrEs. CErTIFICaTIOns
Joystick JULIET Smll-sized, compct nd hndy joystick for control of industril mchines. Juliet is user-friendly, ergonomic product, suitble for dily use in n industril environment. FETUrEs Designed to fcilitte
More informationOPERATION MANUAL. DIGIFORCE 9307 PROFINET Integration into TIA Portal
OPERATION MANUAL DIGIFORCE 9307 PROFINET Integrtion into TIA Portl Mnufcturer: 2018 burster präzisionsmesstechnik gmbh & co kg burster präzisionsmesstechnik gmbh & co kg Alle Rechte vorbehlten Tlstrße
More informationElectrical Specifications
POWER Dt Sheet NTS350 Series 350 Wtts Totl Power: 200-350 Wtts Input Voltge: 85-264 Vc 120-300 Vdc # of Outputs: Single SPECIAL FEATURES Active power fctor correction IEC EN6100-3-2 complince Remote sense
More informationE201 USB Encoder Interface
Dt sheet Issue 3, 14 th July 2014 E201 USB Encoder Interfce E201-9Q - incrementl E201-9S - bsolute bsolute SSI BiSS-C mode (unidirectionl) B Z Clock Dt M SLO The E201 is single chnnel USB encoder interfce
More informationEngineer-to-Engineer Note
Engineer-to-Engineer Note EE-245 Technicl notes on using Anlog Devices DSPs, processors nd development tools Contct our technicl support t dsp.support@nlog.com nd t dsptools.support@nlog.com Or visit our
More informationMcAfee Network Security Platform
Mnger Applince Quick Strt Guide Revision B McAfee Network Security Pltform This guide is high-level description of how to instll nd configure the Mnger Applince. For more detiled instlltion informtion,
More informationELUM TM Series Right Angle Illuminated Latching Pushbutton
LED FREE COMPTIBLE OPTION ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N.C.) Low height above PCB Reliable self-cleaning contact Surface-mount or thru-hole PCB Standard
More informationFile Manager Quick Reference Guide. June Prepared for the Mayo Clinic Enterprise Kahua Deployment
File Mnger Quick Reference Guide June 2018 Prepred for the Myo Clinic Enterprise Khu Deployment NVIGTION IN FILE MNGER To nvigte in File Mnger, users will mke use of the left pne to nvigte nd further pnes
More informationvcloud Director Service Provider Admin Portal Guide vcloud Director 9.1
vcloud Director Service Provider Admin Portl Guide vcloud Director 9. vcloud Director Service Provider Admin Portl Guide You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/
More informationAddress/Data Control. Port latch. Multiplexer
4.1 I/O PORT OPERATION As discussed in chpter 1, ll four ports of the 8051 re bi-directionl. Ech port consists of ltch (Specil Function Registers P0, P1, P2, nd P3), n output driver, nd n input buffer.
More informationRAC06 2D, RAC06 4D, RAC10 2D, RAC10 4D, RAC16 4D, RAC16 8D. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RAC-K-TS-0001 /14 Dte: 2017. 1. 10 Specifiction Title: Style: RAC06 2D, RAC06 4D, RAC10 2D, RAC10 4D, RAC16 4D, RAC16 8D RoS COMPIANCE ITEM logen nd Antimony Free Product specifiction contined
More informationStep-Voltage Regulator Model Test System
IEEE PES GENERAL MEETING, JULY 5 Step-Voltge Regultor Model Test System Md Rejwnur Rshid Mojumdr, Pblo Arboley, Senior Member, IEEE nd Cristin González-Morán, Member, IEEE Abstrct In this pper, 4-node
More informationNOTES. Figure 1 illustrates typical hardware component connections required when using the JCM ICB Asset Ticket Generator software application.
ICB Asset Ticket Genertor Opertor s Guide Septemer, 2016 Septemer, 2016 NOTES Opertor s Guide ICB Asset Ticket Genertor Softwre Instlltion nd Opertion This document contins informtion for downloding, instlling,
More informationRelease Notes for. LANCOM Advanced VPN Client 4.10 Rel
Relese Notes for LANCOM Advnced VPN Client 4.10 Rel Copyright (c) 2002-2018 LANCOM Systems GmbH, Wuerselen (Germny) LANCOM Systems GmbH does not tke ny gurntee nd libility for softwre not developed, mnufctured
More informationEngineer To Engineer Note
Engineer To Engineer Note EE-208 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit
More informationUsing Ontrol MpBus Driver for Sedona on R-ION
Belimo MpBus Driver for R-ION Using Ontrol MpBus Driver for Sedon on R-ION 24 Vdc Supply Devices RS485 supervory system 1/7 Ontrol Belimo MpBus Driver for R-ION R-ION MPBus Connection 2/7 Ontrol Belimo
More informationEpson Projector Content Manager Operation Guide
Epson Projector Content Mnger Opertion Guide Contents 2 Introduction to the Epson Projector Content Mnger Softwre 3 Epson Projector Content Mnger Fetures... 4 Setting Up the Softwre for the First Time
More informationVoltage Monitoring Products
Voltge Monitoring Products Spring 2005 CONTENTS 3-Led Reset Genertor Circuits.. 2 4-Led Reset Genertors with Mnul Reset............ 3 Wtchdog Supervisory Circuits... 4 Bttery-Bckup Supervisory Circuits...........
More informationTECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA. Displaying the PCAP Data Column
TECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA APRIL 2011 If your STRM Console is configured to integrte with the Juniper JunOS Pltform DSM, STRM cn receive, process, nd store Pcket Cpture (PCAP) dt from
More informationWelch Allyn CardioPerfect Workstation Installation Guide
Welch Allyn CrdioPerfect Worksttion Instlltion Guide INSTALLING CARDIOPERFECT WORKSTATION SOFTWARE & ACCESSORIES ON A SINGLE PC For softwre version 1.6.6 or lter For network instlltion, plese refer to
More informationJCM TRAINING OVERVIEW DBV Series DBV-500 Banknote Validator
November, 2016 JCM TRAINING OVERVIEW DBV Series DBV-500 Bnknote Vlidtor Phone (800) 683-7248 (702) 651-0000 Fx (702) 651-0214 E-mil support@jcmglobl.com www.jcmglobl.com 1 DBV-500 Bnknote Vlidtor Tble
More informationQEL 33A/35A, 98/99 Series
*24908394* 24908394 Bseplte Conversion Kit QEL 33A/35A, 98/99 Series Instlltion Instructions 1. This kit converts ll 33/35A nd 98/99 series EL devices nd fire devices uilt prior to Oct. 2014 to quiet electric
More informationMcAfee Network Security Platform
10/100/1000 Copper Active Fil-Open Bypss Kit Guide Revision E McAfee Network Security Pltform This document descries the contents nd how to instll the McAfee 10/100/1000 Copper Active Fil-Open Bypss Kit
More informationTechnical Information
Technicl Informtion TI No. WL 80-47 E Mrch 2001 FAG Induction Heting Devices AWG.MINI AWG3,5 AWG8 AWG13 AWG25 AWG40 Rolling Berings Induction heting devices Appliction Advntges Bsic principle Sfety Appliction
More informationMULTIPLE INTERFACE SHAFT ENCODER MODEL OPERATIONS & MAINTENANCE MANUAL
MULTIPLE INTERFACE SHAFT ENCODER MODEL 56-0540 OPERATIONS & MAINTENANCE MANUAL Prt No. 8800-1137 Revision - B 7-Oct-04 Sutron Corportion 21300 Ridgetop Circle Sterling, VA 20166 (703)406-2800 (703)406-2801
More informationIt consists of two cold rooms, each with their own evaporator but sharing the same cooling flui d R134a system ( compressor, condenser...).
This system llows study of refrigertion systems implementtion of rmodyn mic clcultions pplied to refrigertion Its uniqueness is tht it is fully controllble vi Internet directly from web browser like Internet
More informationEngineer To Engineer Note
Engineer To Engineer Note EE-188 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit
More informationEnginner To Engineer Note
Technicl Notes on using Anlog Devices DSP components nd development tools from the DSP Division Phone: (800) ANALOG-D, FAX: (781) 461-3010, EMAIL: dsp_pplictions@nlog.com, FTP: ftp.nlog.com Using n ADSP-2181
More informationEasyMP Network Projection Operation Guide
EsyMP Network Projection Opertion Guide Contents 2 Introduction to EsyMP Network Projection EsyMP Network Projection Fetures... 5 Disply Options... 6 Multi-Screen Disply Function... 6 Movie Sending Mode...
More information3500 Series Flat Panel Industrial PCs
3500 Series Flt Pnel Industril PCs Xycom Automtion's open solutions connect to other utomtion stndrds with industril PCs tht re tough enough for plnt floor use. (Our stndrd PC configurtions meet the strict
More informationElectrical Engineering & Instrumentation Solutions
Electricl Engineering & Instrumenttion Solutions Engineering Instlltion Testing Integrtion Commissioning Field Services OEL Projects Ltd. Electricl nd Instrumenttion Division offers full suite of electricl
More informationGXR-GPS GXR-GPS-485 User Manual
GXR-GPS GXR-GPS-485 User Mnul GeoSIG Ltd, Wiesenstrsse 39, 8952 Schlieren, Switzerlnd Phone: + 41 44 810 2150, Fx: + 41 44 810 2350 info@geosig.com, www.geosig.com Pge ii Document Revision GS_GXR_GPS_User_Mnul_V05.doc
More informationSeries LJ1. Uniaxial Electric Actuator
CAT.E 90- Unixil Electric Actutor Controller Teching Box Unixil Electric Actutor Series LJ Series LJ Series LC Series LC for horizontl mounting nd brke for verticl mounting hve been dded to the high rigidity
More informationDiscoidal Ceramic Capacitors
Discoidl Cermic Cpcitors Miniture designs down to 0.059 Applictions Medicl implntble devices EMI/RF suppression filters AC pplictions up to 240V DC pplictions up to 0V Fetures Vrious, nd thickness configurtions
More informationCKX-CCSW Confluency checker INSTRUCTIONS. Software for research/education This software is designed to use in research and or education fields.
INSTRUCTIONS Confluency checker NOTE: This instruction mnul is for the Olympus confluency checker. To ensure the sfety, obtin optimum performnce nd to fmilirize yourself fully with the use of this softwre,
More informationJCM TRAINING OVERVIEW ivizion Banknote Acceptor
ivizion Bnknote Acceptor JCM Trining Overview Februry, 2018 Februry, 2018 ivizion-100 Prts List Prt Number - Description 701-000269R ivizion/uba Power Supply 701-100112R ivizion/tbv UAC Kit (lternte power
More informationInstallation Guide AT-VTP-800
Velocity 8 Touch Pnel The Atlon -BL nd -WH re 8 touch pnels in blck nd white, respectively, for the Atlon Velocity Control System. They feture contemporry, refined styling for modern presenttion environments
More informationHow to Design REST API? Written Date : March 23, 2015
Visul Prdigm How Design REST API? Turil How Design REST API? Written Dte : Mrch 23, 2015 REpresenttionl Stte Trnsfer, n rchitecturl style tht cn be used in building networked pplictions, is becoming incresingly
More informationSTANDARD THIRD ANGLE PROJECTION DO NOT SCALE DRAWING
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE LIGHT EDM FINISH. EQUIVLENT TO MT-020. 3. INTERIOR SURFCE TEXTURE TO BE: NONE 4. LL INSIDE RDII.00R.
More informationPOWER COMBICON Feed-through headers with a mm Pitch DFK-PC(V) 6-16/...-G(F)(U)-(SH)-10,16
Feed-through heders with.6 mm Pitch DFK-PC(V) 6-6/...-G(F)(U)-(SH)- The DFK-PC 6 feed-through plug connector is n uncomplicted method of conducting current of 76 A nd voltge of 600 V UL with connection
More informationpdfapilot Server 2 Manual
pdfpilot Server 2 Mnul 2011 by clls softwre gmbh Schönhuser Allee 6/7 D 10119 Berlin Germny info@cllssoftwre.com www.cllssoftwre.com Mnul clls pdfpilot Server 2 Pge 2 clls pdfpilot Server 2 Mnul Lst modified:
More informationElectrical Specifications Input
LCM300 310 Wtts Bulk Front End Totl Power: 310 W # of Outputs: Single Output: 12 to 60 V Optionl 5.0 V stndy 1 of 5 Specil Fetures 310 W (350W Pek) output power Low Cost 1.61 x 4.0 x 7.0 7.1 Wtts Per Cuic
More informationEasyMP Multi PC Projection Operation Guide
EsyMP Multi PC Projection Opertion Guide Contents 2 Introduction to EsyMP Multi PC Projection 5 EsyMP Multi PC Projection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters
More informationInnovative Video Intercom Kits
HFX-700m HFX-900l HFX-720ms Innovtive Video Intercom Kits HFX 700m olor Hnds Free Kit with 3.5 LD Monitor wiring digrms bsic wiring digrm HFX-700M Expnsion monitors (EX-700H or EX-700A). Must be connected
More informationELECTRONIC COMPANY products overview
ELECTRONIC COMPNY products overview POWER CTOR CONTROLLER ND CPCITORS DPC 1 STEP Digital Power actor Controllers SUPPLY VOLTGE DEVICE ROM 23VC 5/6Hz (4VC under request) MONITORING: POWER CTOR IND & CP
More informationSage CRM 2018 R1 Software Requirements and Mobile Features. Updated: May 2018
Sge CRM 2018 R1 Softwre Requirements nd Mobile Fetures Updted: My 2018 2018, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The Sge
More informationM-Historian and M-Trend
Product Bulletin Issue Dte June 18, 2004 M-Historin nd The M-Historin mnges the collection nd rchiving of trend dt, nd enles the presenttion of rchived trend dt in the ssocited softwre component. M-Historin
More informationE/ECE/324/Rev.2/Add.112/Rev.3/Amend.1 E/ECE/TRANS/505/Rev.2/Add.112/Rev.3/Amend.1
6 August 2013 Agreement Concerning the Adoption of Uniform Technicl rescriptions for Wheeled Vehicles, Equipment nd rts which cn be itted nd/or be Used on Wheeled Vehicles nd the Conditions for Reciprocl
More informationLCI/USB LonWorks Commissioning Interface
Works Commissioning Interfce Importnt: Retin these instructions CONTENTS 1 Unpcking... 1 2 Storing... 1 3 Instlltion... 1 4 Uninstlling the USB Drivers... 8 5 Disposl... 8 1 UNPACKING Instlltion Instructions
More informationVulnerability Analysis of Electric Power Communication Network. Yucong Wu
2nd Interntionl Conference on Advnces in Mechnicl Engineering nd Industril Informtics (AMEII 2016 Vulnerbility Anlysis of Electric Power Communiction Network Yucong Wu Deprtment of Telecommunictions Engineering,
More informationSage CRM 2017 R3 Software Requirements and Mobile Features. Updated: August 2017
Sge CRM 2017 R3 Softwre Requirements nd Mobile Fetures Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The
More informationHFX 100 Tx and HFX 100 Rx User Guide
This guide describes the function, instlltion nd opertion of the trnsmitter nd receiver. Unless otherwise stted, the terms HFX 100, HDMI extender, nd extender refer to both units. The term trnsmitter refers
More informationCatalog Computer & Periphery
Ctlog Computer & Periphery 2012 / 09 Phone.: +49 (0) 8031-6506-0 mil@-elektronik.de Airborne Computer System with Docking Sttion type number 01105 nd Cockpit Holder Ruggedized Hndheld Computer Pnther type
More informationemfis emfis Operation and Instruction Manual HPL ELECTRIC & POWER PVT. LTD. AMP
emfis Operation and Instruction Manual vifpe R Y B emfis vifpe MP CL Up Down HPL Electric & Power Pvt. Ltd. 1/21, tma Ram Mansion, saf li Road, New Delhi-110002 Phone : 23234411, 23234811, 23236811; Fax
More informationMcAfee Network Security Platform
Revision D McAfee Network Security Pltform (NS5x00 Quick Strt Guide) This quick strt guide explins how to quickly set up nd ctivte your McAfee Network Security Pltform NS5100 nd NS5200 Sensors in inline
More informationEpson iprojection Operation Guide (Windows/Mac)
Epson iprojection Opertion Guide (Windows/Mc) Contents 2 Introduction to Epson iprojection 5 Epson iprojection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters nd Projection
More informationc360 Add-On Solutions
c360 Add-On Solutions Functionlity Dynmics CRM 2011 c360 Record Editor Reltionship Explorer Multi-Field Serch Alerts Console c360 Core Productivity Pck "Does your tem resist using CRM becuse updting dt
More informationDETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD RECEPTACLE, CARD INSERTION, CONTACT SPACING (.156), TYPES A AND AD
IN-POUND MIL-DTL-1097/1 w/mendment 1 1 uly 011 SUPERSEDING MIL-DTL-1097/1 7 pril 010 DETIL SPEIFITION SEET ONNETORS, ELETRIL, PRINTED WIRING ORD REEPTLE, RD INSERTION, ONTT SPING (.156), TYPES ND D This
More informationR1M-J3 BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL RTD & POTENTIOMETER INPUT MODULE MODEL. (8 points)
INSTRUCTION MNUL RTD & POTENTIOMETER INPUT MODULE (8 points) MODEL EFORE USE... Thank you for choosing M-System. efore use, please check contents of the package you received as outlined below. If you have
More informationTixeo compared to other videoconferencing solutions
compred to other videoconferencing solutions for V171026EN , unique solution on the video conferencing field Adobe Connect Web RTC Vydio for High security level, privcy Zero impct on network security policies
More informationEngineer-to-Engineer Note
Engineer-to-Engineer Note EE-232 Technicl notes on using Anlog Devices DSPs, processors nd development tools Contct our technicl support t dsp.support@nlog.com nd t dsptools.support@nlog.com Or visit our
More informationKESTREL VWF350 KESTREL VWF350. Multi output switch mode power supplies FEATURES. 350W continuous output power, 500W surge
KESTREL VWF350 Multi output switch mode power supplies KESTREL VWF350 FEATURES 350W continuous output power, 500W surge Up to 5 fully regulted outputs Power fctor corrected, universl input Integrl fn cooling
More informationSPARC T7-2 Server. Product Overview
O R A C L E D A T A S H E E T SPARC T7-2 Server Orcle s SPARC T7 nd M7 servers re the world s most dvnced systems for enterprise worklods, with unique cpbilities for informtion security, dtbse nd Jv ccelertion.
More informationSTRM Installation Guide
Security Thret Response Mnger Relese 2013.2 Juniper Networks, Inc. 1194 North Mthild Avenue Sunnyvle, CA 94089 USA 408-745-2000 www.juniper.net Published: 2014-09-15 Copyright Notice Copyright 2014 Juniper
More informationMcAfee Network Security Platform
Revision C McAfee Network Security Pltform (40 Gigit Active Fil-Open Bypss Kit Guide) McAfee Network Security Pltform IPS Sensors, when deployed in-line, route ll incoming trffic through designted port
More informationGSR-12 / 16 / 18 AS-12 / 16 GCR-12 / 16
GSR-12 / 16 / 18 AS-12 / 16 GCR-12 / 16 User Mnul GeoSIG Ltd, Ahornweg 5, 5504 Othmrsingen, Switzerlnd Phone: + 41 44 810 2150, Fx: + 41 44 810 2350 info@geosig.com, www.geosig.com GeoSIG Ltd. GS_GSR_GCR_UserMnul_V21.doc
More informationLicense Manager Installation and Setup
The Network License (concurrent-user) version of e-dpp hs hrdwre key plugged to the computer running the License Mnger softwre. In the e-dpp terminology, this computer is clled the License Mnger Server.
More informationMEDIUM 3 AA - STANDARD SXX XXX
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE EDM FINISH. EQUIVLENT TO MT-020. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS
More informationREV A NOMINAL LINE + 1 % OF NOMINAL OUTPUT VOLTAGE MEASURED AT O/P CONNECTOR
PROPRIETRY INFORMTION: PROPRIETRY OF GLOBTEK, INC. NY REPRODUCTION, DISCLOSURE OR USE OF THIS DRWING, IN WHOLE OR IN PRT, IS HEREBY PROHIBITED EXCEPT S SPECIFIED IN WRITING BY GLOBTEK, INC. REV REVISION
More informationTool Vendor Perspectives SysML Thus Far
Frontiers 2008 Pnel Georgi Tec, 05-13-08 Tool Vendor Perspectives SysML Thus Fr Hns-Peter Hoffmnn, Ph.D Chief Systems Methodologist Telelogic, Systems & Softwre Modeling Business Unit Peter.Hoffmnn@telelogic.com
More informationCOMBICON Spring Cage Plugs and Headers with Self-Locking Flange 5.08 mm Pitch
COMBICON Spring Cge Plugs nd Heders with Self-Locking Flnge The new FKC-RF spring cge plug offers new locking system: the fst plug locking system bsed on the "click'n lock" principle. When the plug is
More informationvcloud Director Tenant Portal Guide vcloud Director 9.1
vcloud Director Tennt Portl Guide vcloud Director 9.1 You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/ If you hve comments bout this documenttion, submit
More informationEngineer-to-Engineer Note
Engineer-to-Engineer Note EE-204 Technicl notes on using Anlog Devices DSPs, processors nd development tools Visit our Web resources http://www.nlog.com/ee-notes nd http://www.nlog.com/processors or e-mil
More information