ODMR0205 Dimmer + Controller

Transcription

1 ODMR0205 Dimmer + Controer Summary Thanks for using ODMR0205 phase cut dimmer. This is a two channes output MOS-FET phase cut dimmer the max. current of each channe is 5A. Product Features Compy with EU-BUS protoco Output 2 channes phase cut signa, Max. current of each channe is 5A Support AC V input, Frequency can be auto adaptive. Support Keypad contro in Manua Mode Support 0-10V signas input, output can be dimmed by 0-10V signas Support Master mode Support ISP function, the firmware can be updated by RS485 Interface without removing the case Support memory function Integrated 1.7 OLED LCD and 5 Buttons Independent Repacabe Out put fuse on both out put channe for additiona safety and ease Parameters Name Parameter Input Votage VAC 50/60HZ Dimension 210*131*58mm, mm Package Size 12 pc per carton N.W. for 1 pc of dimmer 1 Kg (2.2 Lb) / pc Work Temp Specs dimmer Rev 03 1 Subject to change without notice com

2 Dimension (mm) Product Function Detais Power Keypad 5 2 Channes Phase cut Output 2 Edit Keypad 6 Input of the AC 3 Repaceabe fuse 7 Input 0-10V Signas 4 LCD dispay 8 EU-BUS Interface for ISP Specs dimmer Rev 03 2 Subject to change without notice com

3 Connecting Main Input and Output connections Pease remove the Eectrica connector Safety Cover by unscrewing the 4 Screws as shown beow: After connection pease proceed to program or operate as per instruction given beow. Programming Method 1. Initia startup When input power is suppied, previous operating state (under one of Manua, Save, Master modes) wi be oaded. Which means the previous operating state wi restore. If the previous state is Power OFF by power button, the power LED wi bink, and LCD won t be powered on. 1.1 LCD and Keypad introduction OLED LCD resoution: 128*64 4 Keypads for LCD, and 1 Keypad for power ON/OFF; Enter: to seect or go to next sub menu; Back: to unseect or go back to previous menu; Up: for up operation; Specs dimmer Rev 03 3 Subject to change without notice com

4 Down: for down operation; Power: to Power ON/OFF the dimmer; The top menu is main menu, incuding System Mode/Scene Edit/System Set. System Mode: user can seect from Manua, Save and Master Mode. Scene Edit: user can edit and save programs under master mode. System Set: to correct system time, LCD Backight on/off and reset to factory setting 1.2 System Mode In the main menu, run cursor to system mode and press enter, system mode wi be enter. There are 3 modes can be seected: Manua Mode/Save Mode/Master Mode Manua Mode In Manua Mode, user can contro the output by keypads. Just run cursor to CH1 or CH2 by up or down keypad, press Enter, the cursor changes into. Then the dimming eve can be adjusted by UP/Down button within a range from 0% to 100% Save Mode In Save Mode, There is a 0-10V DC input for the user choose to operate the dimmer by a controer. The output percent wi be dispayed on LCD. There is no 0-10V signa detected, the dimmer wi shut down the output Master Mode Specs dimmer Rev 03 4 Subject to change without notice com

5 In Master Mode, we can seect the start date. After seected the start date, we can run current program. Pease run cursor to the ine and press enter keypad. Current program information wi be dispayed on the screen. 1.3 Scene Edit In Master Mode, dimmer wi run program automaticay. And the programs can be edited in Scene Edit menu. First pease seect which day you want to edit, then divided the day into different periods. In each period, you can seect each channe output eve and fade time Day Edit Run cursor to Day Edit ine, press Enter, cursor wi be changed, and then we can seect which day we wanted to edit. For the days we did not edit, the output wi stay in 0%. For exampe, if we edit Day1 and Day4 ony, then the outputs of day 2 and day 3 wi be 0% Period Edit In Period edit, user can edit program in detais Keep Pre Day Pro After seect day, period can be edit. There is an easy way to copy previous day program setting, just seect keep pre day pro. The program is same as previous day, without setting again. Specs dimmer Rev 03 5 Subject to change without notice com

6 Period x Each period can be edit, period can be aso deete. For exampe we want to deete period3.we can enter the period3, and seect De period. Period3 wi be deete. Period4 wi be renamed for period3 for continuous. Period begin time can be edit, after seect Begin:xx:xx, when Enter keypad first pressed, Hour wi be bink, user can use UP/DOWN keypad seect hour. If user can adjust minute, after Press Enter keypad for second time. Period end time can be edit, just as begin time. CH1 output and CH2 output can be edit separatey in one Period. Fade Time can be set from 0-99 second. When period 1 is finished and period 2 begin, Channe output may be different. Fade time is the how ong the new output eve wi be reached. For exampe: in new period, CH1 output wi be form 10% to 20%, fade time is 10 second. Then CH1 output wi be increase 1% each second unti output eve reach 20%. Fade time set to ong time, the output wi be changed sowy. And the brightness of bubs wi be increase sowy, make a soft fee, without brightness changed suddeny. Specs dimmer Rev 03 6 Subject to change without notice com

7 Add New When user want to add new period, put cursor on the ine Add New. After press Enter keypad, new period wi be added Reset Program If user want to reset program, pease enter Reset Program. A setting wi be deeted, user can start a new program. 1.4 System Set Time Edit In system set menu, current time can be set. After enter Time Edit, user can edit Current time LCD Seep LCD can be set go to seep or not during power on time. If seect seep on, LCD wi be off after 2 minute, without any operation. If seep off, LCD wi be aways on. Note: LCD wi be off during Power off time, this setting is ony avaiabe during power on time. Specs dimmer Rev 03 7 Subject to change without notice com

8 1.4.3 Factory Reset Factory Reset is used to back up origina setting. Program wi be deete and LCD seep wi be aways off. Specs dimmer Rev 03 8 Subject to change without notice com